Factor the test for \0 in grep patterns into a function. Since commit
9eceddeec6 ("Use kwset in grep", 2011-08-21) any pattern containing a
\0 is considered fixed as regcomp() can't handle it.
This change makes later changes that make use of either has_null() or
is_fixed() (but not both) smaller.
While I'm at it make the comment conform to the style guide, i.e. add
an opening "/*\n".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove redundant assignments to the "regflags" variable. This variable
is only used set under GREP_PATTERN_TYPE_ERE, so there's no need to
un-set it under GREP_PATTERN_TYPE_{FIXED,BRE,PCRE}.
Back in 5010cb5fcc[1], we did do "opt.regflags &= ~REG_EXTENDED" upon
seeing "-G" on the command line and flipped the bit on upon seeing
"-E", but I think that was perfectly sensible and it would have been a
bug if we didn't. They were part of the command line parsing that
could have seen "-E" on the command line earlier.
When cca2c172 ("git-grep: do not die upon -F/-P when
grep.extendedRegexp is set.", 2011-05-09) switched the command line
parsing to "read into a 'tentatively this is what we saw the last'
variable and then finally commit just once", we didn't touch
opt.regflags for PCRE and FIXED, but we still had to flip regflags
between BRE and ERE, because parsing of grep.extendedregexp
configuration variable directly touched opt.regflags back then, which
was done by b22520a3 ("grep: allow -E and -n to be turned on by
default via configuration", 2011-03-30).
When 84befcd0 ("grep: add a grep.patternType configuration setting",
2012-08-03) introduced extended_regexp_option field, we stopped
flipping regflags while reading the configuration, and that was when
we should have noticed and stopped dropping REG_EXTENDED bit in the
"now we can commit what type to use" helper function.
There is no reason to do this anymore, so stop doing it, more to
reduce "wait this is used under fixed/BRE/PCRE how?" confusion when
reading the code, than to to save ourselves trivial CPU cycles by
removing one assignment.
1. "built-in "git grep"", 2006-04-30.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a die(...) to a default case for the switch statement selecting
between grep pattern types under --recurse-submodules.
Normally this would be caught by -Wswitch, but the grep_pattern_type
type is converted to int by going through parse_options(). Changing
the argument type passed to compile_submodule_options() won't work,
the value will just get coerced. The -Wswitch-default warning will
warn about it, but that produces a lot of noise across the codebase,
this potential issue would be drowned in that noise.
Thus catching this at runtime is the least bad option. This won't ever
trigger in practice, but if a new pattern type were to be added this
catches an otherwise silent bug during development.
See commit 0281e487fd ("grep: optionally recurse into submodules",
2016-12-16) for the initial addition of this code.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a performance comparison test of grep regex engines given fixed
strings.
The current logic in compile_regexp() ignores the engine parameter and
uses kwset() to search for these, so this test shows no difference
between engines right now:
$ GIT_PERF_REPEAT_COUNT=10 GIT_PERF_LARGE_REPO=~/g/linux ./run p7821-grep-engines-fixed.sh
[...]
Test this tree
------------------------------------------------
7821.1: fixed grep int 0.56(1.67+0.68)
7821.2: basic grep int 0.57(1.70+0.57)
7821.3: extended grep int 0.59(1.76+0.51)
7821.4: perl grep int 1.08(1.71+0.55)
7821.6: fixed grep uncommon 0.23(0.55+0.50)
7821.7: basic grep uncommon 0.24(0.55+0.50)
7821.8: extended grep uncommon 0.26(0.55+0.52)
7821.9: perl grep uncommon 0.24(0.58+0.47)
7821.11: fixed grep æ 0.36(1.30+0.42)
7821.12: basic grep æ 0.36(1.32+0.40)
7821.13: extended grep æ 0.38(1.30+0.42)
7821.14: perl grep æ 0.35(1.24+0.48)
Only when run with -i via GIT_PERF_7821_GREP_OPTS=' -i' do we avoid
avoid going through the same kwset.[ch] codepath, see the "Even when
-F..." comment in grep.c. This only kicks for the non-ASCII case:
$ GIT_PERF_REPEAT_COUNT=10 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_7821_GREP_OPTS=' -i' ./run p7821-grep-engines-fixed.sh
[...]
Test this tree
---------------------------------------------------
7821.1: fixed grep -i int 0.62(2.10+0.57)
7821.2: basic grep -i int 0.68(1.90+0.61)
7821.3: extended grep -i int 0.78(1.94+0.57)
7821.4: perl grep -i int 0.98(1.78+0.74)
7821.6: fixed grep -i uncommon 0.24(0.44+0.64)
7821.7: basic grep -i uncommon 0.25(0.56+0.54)
7821.8: extended grep -i uncommon 0.27(0.62+0.45)
7821.9: perl grep -i uncommon 0.24(0.59+0.49)
7821.11: fixed grep -i æ 0.30(0.96+0.39)
7821.12: basic grep -i æ 0.27(0.92+0.44)
7821.13: extended grep -i æ 0.28(0.90+0.46)
7821.14: perl grep -i æ 0.28(0.74+0.49)
I'm planning to change how fixed-string searching happens. This test
gives a baseline for comparing performance before & after any such
change.
See commit ("perf: add a comparison test of grep regex engines",
2017-04-19) for details on the machine the above test run was executed
on.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a very basic performance comparison test comparing the POSIX
basic, extended and perl engines.
In theory the "basic" and "extended" engines should be implemented
using the same underlying code with a slightly different pattern
parser, but some implementations may not do this. Jump through some
slight hoops to test both, which is worthwhile since "basic" is the
default.
Running this on an i7 3.4GHz Linux 4.9.0-2 Debian testing against a
checkout of linux.git & latest upstream PCRE, both PCRE and git
compiled with -O3 using gcc 7.1.1:
$ GIT_PERF_REPEAT_COUNT=10 GIT_PERF_LARGE_REPO=~/g/linux ./run p7820-grep-engines.sh
[...]
Test this tree
---------------------------------------------------------------
7820.1: basic grep 'how.to' 0.34(1.24+0.53)
7820.2: extended grep 'how.to' 0.33(1.23+0.45)
7820.3: perl grep 'how.to' 0.31(1.05+0.56)
7820.5: basic grep '^how to' 0.32(1.24+0.42)
7820.6: extended grep '^how to' 0.33(1.20+0.44)
7820.7: perl grep '^how to' 0.57(2.67+0.42)
7820.9: basic grep '[how] to' 0.51(2.16+0.45)
7820.10: extended grep '[how] to' 0.49(2.20+0.43)
7820.11: perl grep '[how] to' 0.56(2.60+0.43)
7820.13: basic grep '\(e.t[^ ]*\|v.ry\) rare' 0.66(3.25+0.40)
7820.14: extended grep '(e.t[^ ]*|v.ry) rare' 0.65(3.19+0.46)
7820.15: perl grep '(e.t[^ ]*|v.ry) rare' 1.05(5.74+0.34)
7820.17: basic grep 'm\(ú\|u\)lt.b\(æ\|y\)te' 0.34(1.28+0.47)
7820.18: extended grep 'm(ú|u)lt.b(æ|y)te' 0.34(1.38+0.38)
7820.19: perl grep 'm(ú|u)lt.b(æ|y)te' 0.39(1.56+0.44)
Options can also be passed to git-grep via the GIT_PERF_7820_GREP_OPTS
environment variable. There are various modes such as "-v" that have
very different performance profiles, but handling the combinatorial
explosion of testing all those options would make this script much
more complex and harder to maintain. Instead just add the ability to
do one-shot runs with arbitrary options, e.g.:
$ GIT_PERF_REPEAT_COUNT=10 GIT_PERF_LARGE_REPO=~/g/linux GIT_PERF_7820_GREP_OPTS=" -i" ./run p7820-grep-engines.sh
[...]
Test this tree
------------------------------------------------------------------
7820.1: basic grep -i 'how.to' 0.49(1.72+0.38)
7820.2: extended grep -i 'how.to' 0.46(1.64+0.42)
7820.3: perl grep -i 'how.to' 0.44(1.45+0.45)
7820.5: basic grep -i '^how to' 0.47(1.76+0.38)
7820.6: extended grep -i '^how to' 0.47(1.70+0.42)
7820.7: perl grep -i '^how to' 0.65(2.72+0.37)
7820.9: basic grep -i '[how] to' 0.86(3.64+0.42)
7820.10: extended grep -i '[how] to' 0.84(3.62+0.46)
7820.11: perl grep -i '[how] to' 0.73(3.06+0.39)
7820.13: basic grep -i '\(e.t[^ ]*\|v.ry\) rare' 1.63(8.13+0.36)
7820.14: extended grep -i '(e.t[^ ]*|v.ry) rare' 1.64(8.01+0.44)
7820.15: perl grep -i '(e.t[^ ]*|v.ry) rare' 1.44(6.88+0.44)
7820.17: basic grep -i 'm\(ú\|u\)lt.b\(æ\|y\)te' 0.66(2.67+0.44)
7820.18: extended grep -i 'm(ú|u)lt.b(æ|y)te' 0.66(2.67+0.43)
7820.19: perl grep -i 'm(ú|u)lt.b(æ|y)te' 0.59(2.31+0.37)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, the remote repository name in, e.g., `git fetch foo\bar`
is clearly not a nickname for a configured remote repository. However,
the function valid_remote_nick() does not account for backslashes.
Use is_dir_sep() to check for both slashes and backslashes on Windows.
This was discovered while playing with Duy's patches that warn after
fopen() failures. The functions that read the branches and remotes
files are protected by a valid_remote_nick() check. Without this
change, a Windows style absolute path is incorrectly regarded as
nickname and is concatenated to a prefix and used with fopen(). This
triggers warnings because a colon in a path name is not allowed:
C:\Temp\gittest>git fetch C:\Temp\gittest
warning: unable to access '.git/remotes/C:\Temp\gittest': Invalid argument
warning: unable to access '.git/branches/C:\Temp\gittest': Invalid argument
From C:\Temp\gittest
* branch HEAD -> FETCH_HEAD
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we diff a blob against a working tree file like:
git diff HEAD:Makefile Makefile
we always use the working tree filename for both sides of
the diff. In most cases that's fine, as the two would be the
same anyway, as above. And until recently, we used the
"name" for the blob, not the path, which would have the
messy "HEAD:" on the beginning.
But when they don't match, like:
git diff HEAD:old_path new_path
it makes sense to show both names.
This patch uses the blob's path field if it's available, and
otherwise falls back to using the filename (in preference to
the blob's name, which is likely to be garbage like a raw
sha1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a subtle distinction between "name" and "path" for a
blob that we resolve: the name is what the user told us on
the command line, and the path is what we traversed when
finding the blob within a tree (if we did so).
When we diff blobs directly, we use "name", but "path" is
more likely to be useful to the user (it will find the
correct .gitattributes, and give them a saner diff header).
We still have to fall back to using the name for some cases
(i.e., any blob reference that isn't of the form tree:path).
That's the best we can do in such a case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The stuff_change() function makes diff_filespecs out of
blobs. The term we generally use for filespecs is "path",
not "name", so let's be consistent here. That will make
things less confusing when the next patch starts caring
about the path/name distinction inside the pending object
array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diffing blobs directly, git-diff picks the blobs out of
the rev_info's pending array and copies the relevant bits to
a custom "struct blobinfo". But the pending array entry
already has all of this information (and more, which we'll
use in future patches). Let's just pass the original entry
instead.
In practice, these two blobs are probably adjacent in the
revs->pending array, and we could just pass the whole array.
But the current code is careful to pick each blob out
separately and put it into another array, so we'll continue
to do so and make our own array-of-pointers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the revision parser sees an argument like tree:path, we
parse it down to the correct blob (or tree), but throw away
the "path" portion. Let's ask get_sha1_with_context() to
record it, and pass it along in the pending array.
This will let programs like git-diff which rely on the
revision-parser show more accurate paths.
Note that the implementation is a little tricky; we have to
make sure we free oc.path in all code paths. For handle_dotdot(),
we can piggy-back on the existing cleanup-wrapper pattern.
The real work happens in handle_dotdot_1(), but the
handle_dotdot() wrapper makes sure that the path is freed no
matter how we exit the function (and for that reason we make
sure that the object_context struct is zero'd, so if we fail
to even get to the get_sha1_with_context() call, we just end
up calling free(NULL)).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "a..b" revision syntax was designed to handle commits,
so it doesn't bother to record any mode we find while
traversing a "tree:path" endpoint. These days "git diff" can
diff blobs using either "a:path..b:path" (with dots) or
"a:path b:path" (without), but the two behave
inconsistently, as the with-dots version fails to notice the
mode.
Let's teach the dot-dot range parser to record modes; it
doesn't cost us anything, and it makes this case work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-diff command can directly compare two blobs (or a
blob and a file), but we don't test this at all. Let's add
some basic tests that reveal a few problems.
There are basically four interesting inputs:
1. sha1 against sha1 (where diff has no information beyond
the contents)
2. tree:path against tree:path (where it can get
information via get_sha1_with_context)
3. Same as (2), but using the ".." range syntax
4. tree:path against a filename
And beyond generating a sane diff, we care about a few
little bits: which paths they show in the diff header, and
whether they correctly pick up a mode change.
They should all be able to show a mode except for (1),
though note that case (3) is currently broken.
For the headers, we would ideally show the path within the
tree if we have it, making:
git diff a:path b:path
look the same as:
git diff a b -- path
We can't always do that (e.g., in the direct sha1/sha1 diff,
we have no path to show), in which case we should fall back
to the name that resolved to the blob (which is nonsense
from the repository's perspective, but is the best we can
do).
Aside from the fallback case in (1), none of the cases get
this right. Cases (2) and (3) always show the full
tree:path, even though we should be able to know just the
"path" portion.
Case (4) picks up the filename path, but assigns it to
_both_ sides of the diff. So this works for:
git diff tree:path path
but not for:
git diff tree:other_path path
The appropriate tests are marked to expect failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a sha1 lookup returns the tree path via "struct
object_context", it just copies it into a fixed-size buffer.
This means the result can be truncated, and it means our
"struct object_context" consumes a lot of stack space.
Instead, let's allocate a string on the heap. Because most
callers don't care about this information, we'll avoid doing
it by default (so they don't all have to start calling
free() on the result). There are basically two options for
the caller to signal to us that it's interested:
1. By setting a pointer to storage in the object_context.
2. By passing a flag in another parameter.
Doing (1) would match the way that sha1_object_info_extended()
works. But it would mean that every caller would have to
initialize the object_context, which they don't currently
have to do.
This patch does (2), and adds a new bit to the function's
flags field. All of the callers that look at the "path"
field are updated to pass the new flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_sha1_with_context() function zeroes out the
oc->symlink_path strbuf, but doesn't use strbuf_init() to
set up the usual invariants (like pointing to the slopbuf).
We don't actually write to the oc->symlink_path strbuf
unless we call get_tree_entry_follow_symlinks(), and that
function does initialize it. However, readers may still look
at the zero'd strbuf.
In practice this isn't a triggerable bug. The only caller
that looks at it only does so when the mode we found is 0.
This doesn't happen for non-tree-entries (where we return
S_IFINVALID). A broken tree entry could have a mode of 0,
but canon_mode() quietly rewrites that into S_IFGITLINK.
So the "0" mode should only come up when we did indeed find
a symlink.
This is mostly just an accident of how the code happens to
work, though. Let's future-proof ourselves to make sure the
strbuf is properly initialized for all calls (it's only a
few struct member assignments, not a heap allocation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An early version of the patch to add object_context used the
name object_resolve_context. This was later shortened to
just object_context, but the "orc" variable name stuck in a
few places. Let's use "oc", which is used elsewhere in the
code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handle_revision_arg function is rather long, and a big
chunk of it is handling the range operators. Let's pull that
out to a separate helper. While we're doing so, we can clean
up a few of the rough edges that made the flow hard to
follow:
- instead of manually restoring *dotdot (that we overwrote
with a NUL), do the real work in a sub-helper, which
makes it clear that the munge/restore lines are a
matched pair
- eliminate a goto which wasn't actually used for control
flow, but only to avoid duplicating a few lines
(instead, those lines are pushed into another helper
function)
- use early returns instead of deep nesting
- consistently name all variables for the left-hand side
of the range as "a" (rather than "this" or "from") and
the right-hand side as "b" (rather than "next", or using
the unadorned "sha1" or "flags" from the main function).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 003c84f6d (specifying ranges: we did not mean to make
".." an empty set, 2011-05-02), we treat the argument ".."
specially. We detect it by noticing that both sides of the
range are empty, and that this is a non-symmetric two-dot
range.
While correct, this makes the code overly complicated. We
can just detect ".." up front before we try to do further
parsing. This avoids having to de-munge the NUL from dotdot,
and lets us eliminate an extra const array (which we needed
only to do direct pointer comparisons).
It also removes the one code path from the range-parsing
conditional that requires us to return -1. That will make it
simpler to pull the dotdot parsing out into its own
function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The handle_revision_arg() function has a "dotdot" variable
that it uses to find a ".." or "..." in the argument. If we
don't find one, we look for other marks, like "^!". But we
just keep re-using the "dotdot" variable, which is
confusing.
Let's introduce a separate "mark" variable that can be used
for these other marks. They still reuse the same variable,
but at least the name is no longer actively misleading.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "dotdot" range parser avoids calling
lookup_commit_reference() if we are directly fed two
commits. But its casts are unnecessarily complex; that
function will just return a commit we pass into it.
Just calling the function all the time is much simpler, and
doesn't do any significant extra work (the object is already
parsed, and deref_tag() on a non-tag is a noop; we do incur
one extra lookup_object() call, but that's fairly trivial).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are parsing a range like "a..b", we write a
temporary NUL over the first ".", so that we can access the
names "a" and "b" as C strings. But our restoration of the
original "." is done at inconsistent times, which can lead
to confusing results.
For most calls, we restore the "." after we resolve the
names, but before we call verify_non_filename(). This means
that when we later call add_pending_object(), the name for
the left-hand "a" has been re-expanded to "a..b". You can
see this with:
git log --source a...b
where "b" will be correctly marked with "b", but "a" will be
marked with "a...b". Likewise with "a..b" (though you need
to use --boundary to even see "a" at all in that case).
To top off the confusion, when the REVARG_CANNOT_BE_FILENAME
flag is set, we skip the non-filename check, and leave the
NUL in place.
That means we do report the correct name for "a" in the
pending array. But some code paths try to show the whole
"a...b" name in error messages, and these erroneously show
only "a" instead of "a...b". E.g.:
$ git cherry-pick HEAD:foo...HEAD:foo
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
error: object d95f3ad14dee633a758d2e331151e950dd13e4ed is a blob, not a commit
fatal: Invalid symmetric difference expression HEAD:foo
(That last message should be "HEAD:foo...HEAD:foo"; I used
cherry-pick because it passes the CANNOT_BE_FILENAME flag).
As an interesting side note, cherry-pick actually looks at
and re-resolves the arguments from the pending->name fields.
So it would have been visibly broken by the first bug, but
the effect was canceled out by the second one.
This patch makes the whole function consistent by re-writing
the NUL immediately after calling verify_non_filename(), and
then restoring the "." as appropriate in some error-printing
and early-return code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is an implicit assumption that a directory containing only
untracked and ignored paths should itself be considered untracked. This
makes sense in use cases where we're asking if a directory should be
added to the git database, but not when we're asking if a directory can
be safely removed from the working tree; as a result, clean -d would
assume that an "untracked" directory containing ignored paths could be
deleted, even though doing so would also remove the ignored paths.
To get around this, we teach clean -d to collect ignored paths and skip
an untracked directory if it contained an ignored path, instead just
removing the untracked contents thereof. To achieve this, cmd_clean()
has to collect all untracked contents of untracked directories, in
addition to all ignored paths, to determine which untracked dirs must be
skipped (because they contain ignored paths) and which ones should *not*
be skipped.
For this purpose, correct_untracked_entries() is introduced to prune a
given dir_struct of untracked entries containing ignored paths and those
untracked entries encompassed by the untracked entries which are not
pruned away.
A memory leak is also fixed in cmd_clean().
This also fixes the known breakage in t7300, since clean -d now skips
untracked directories containing ignored paths.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a duplicate mention of --contains in the SYNOPSIS to mention
--no-contains.
This fixes an error introduced in my commit ac3f5a3468 ("ref-filter:
add --no-contains option to tag/branch/for-each-ref", 2017-03-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows the environment variable PATH contains a semicolon-separated
list of directories to search for, in order, when looking for the
location of a binary to run. get_path_split() parses it and returns an
array of string copies, which is iterated by path_lookup(), which in
turn passes each entry to lookup_prog().
Change lookup_prog() to take the directory name as a length-limited
string instead of as a NUL-terminated one and parse PATH directly in
path_lookup(). This avoids memory allocations, simplifying the code.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taking git-compat-util.h's cue (which uses an inline function to back
is_dir_sep()), let's use an inline function to back also the Windows
version of is_dir_sep(). This avoids problems when calling the function
with arguments that do more than just provide a single character, e.g.
incrementing a pointer. Example:
is_dir_sep(*p++)
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The manual for "git interpret-trailers" mentioned a non-existing
literal `overwrite` for its config option `trailer.ifexists`. The
correct name for that choice is `replace`.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of the test was not enclosed in single quotes, which
broke the coloring scheme that I am used to. Upon closer inspection
the test is good, but the description is a bit vague. So extend the
description of the first test.
While at it align the description of the file to match what we actually
test in the file.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update tests to pass under GETTEXT_POISON (a mechanism to ensure
that output strings that should not be translated are not
translated by mistake), and tell TravisCI to run them.
* ab/fix-poison-tests:
travis-ci: add job to run tests with GETTEXT_POISON
travis-ci: setup "prove cache" in "script" step
tests: fix tests broken under GETTEXT_POISON=YesPlease
The receive-pack program now makes sure that the push certificate
records the same set of push options used for pushing.
* jt/push-options-doc:
receive-pack: verify push options in cert
docs: correct receive.advertisePushOptions default
The Web interface to gmane news archive is long gone, even though
the articles are still accessible via NTTP. Replace the links with
ones to public-inbox.org. Because their message identification is
based on the actual message-id, it is likely that it will be easier
to migrate away from it if/when necessary.
* ab/doc-replace-gmane-links:
doc: replace more gmane links
doc: replace a couple of broken gmane links
A few codepaths in "checkout" and "am" working on an unborn branch
tried to access an uninitialized piece of memory.
* rs/checkout-am-fix-unborn:
am: check return value of resolve_refdup before using hash
checkout: check return value of resolve_refdup before using hash
* ls/travis-relays-for-windows-ci:
travis-ci: retry if Git for Windows CI returns HTTP error 502 or 503
travis-ci: handle Git for Windows CI status "failed" explicitly
Setting "log.decorate=false" in the configuration file did not take
effect in v2.13, which has been corrected.
* ah/log-decorate-default-to-auto:
builtin/log: honor log.decorate
We want to use cmp_name() and check_contains() (which both compare
`struct dir_entry`s, the former in terms of the sort order, the latter
in terms of whether one lexically contains another) outside of dir.c,
so we have to (1) change their linkage and (2) rename them as
appropriate for the global namespace. The second is achieved by
renaming cmp_name() to cmp_dir_entry() and check_contains() to
check_dir_entry_contains().
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we taught read_directory_recursive() to recurse into untracked
directories in search of ignored files given DIR_SHOW_IGNORED_TOO, that
had the side effect of teaching it to collect the untracked contents of
untracked directories. It doesn't always make sense to return these,
though (we do need them for `clean -d`), so we introduce a flag
(DIR_KEEP_UNTRACKED_CONTENTS) to control whether or not read_directory()
strips dir->entries of the untracked contents of untracked dirs.
We also introduce check_contains() to check if one dir_entry corresponds
to a path which contains the path corresponding to another dir_entry.
This also fixes known breakages in t7061, since status --ignored now
searches untracked directories for ignored files.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We consider directories containing only untracked and ignored files to
be themselves untracked, which in the usual case means we don't have to
search these directories. This is problematic when we want to collect
ignored files with DIR_SHOW_IGNORED_TOO, though, so we teach
read_directory_recursive() to recurse into untracked directories to find
the ignored files they contain when DIR_SHOW_IGNORED_TOO is set. This
has the side effect of also collecting all untracked files in untracked
directories as well.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per eb8c5b87, `status --ignored` by design does not list ignored files
if they are in a directory which contains only ignored and untracked
files (which is itself considered to be untracked) without `-uall`. This
does not make sense for `--ignored`, which claims to "Show ignored files
as well."
Thus we revisit eb8c5b87 and decide that for such directories, `status
--ignored` will list the directory as untracked *and* list all ignored
files within said directory even without `-uall`.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If git sees a directory which contains only untracked and ignored
files, clean -d should not remove that directory. It was recently
discovered that this is *not* true of git clean -d, and it's possible
that this has never worked correctly; this test and its accompanying
patch series aims to fix that.
Signed-off-by: Samuel Lijin <sxlijin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit d8193743e0 ("usage.c: add BUG() function", 12-05-2017) added the
BUG() functions and macros as a replacement for calls to die("BUG: ..").
The use of NORETURN on the declarations (in git-compat-util.h) and the
lack of NORETURN on the function definitions, however, leads sparse to
complain thus:
SP usage.c
usage.c:220:6: error: symbol 'BUG_fl' redeclared with different type
(originally declared at git-compat-util.h:1074) - different modifiers
In order to suppress the sparse error, add the NORETURN to the function
definitions.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update sha1dc from the latest version by the upstream
maintainer[1].
This version includes a commit of mine which allows for replacing the
local modifications done to the upstream files in git.git with macro
definitions to monkeypatch it in place.
It also brings in a change[2] upstream made for the breakage 2.13.0
introduced on SPARC and other platforms that forbid unaligned
access[3].
This means that the code customizations done since the initial import
in commit 28dc98e343 ("sha1dc: add collision-detecting sha1
implementation", 2017-03-16) can be done purely via Makefile
definitions and by including the content of our own sha1dc_git.[ch] in
sha1dc/sha1.c via a macro.
1. cc465543b3
2. 33a694a9ee
3. "Git 2.13.0 segfaults on Solaris SPARC due to DC_SHA1=YesPlease
being on by default"
(https://public-inbox.org/git/CACBZZX6nmKK8af0-UpjCKWV4R+hV-uk2xWXVA5U+_UQ3VXU03g@mail.gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Amend the t/perf/run output so that in addition to the "Running N
tests" heading currently being emitted, it also emits "Unpacking $rev"
and "Building $rev" when setting up the build/$rev directory & when
building it, respectively.
This makes it easier to see what's going on and what revision is being
tested as the output scrolls by.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a git GIT_PERF_MAKE_COMMAND variable to compliment the existing
GIT_PERF_MAKE_OPTS facility. This allows specifying an arbitrary shell
command to execute instead of 'make'.
This is useful e.g. in cases where the name, semantics or defaults of
a Makefile flag have changed over time. It can even be used to change
the contents of the tree, useful for monkeypatching ancient versions
of git to get them to build.
This opens Pandora's box in some ways, it's now possible to
"jailbreak" the perf environment and e.g. modify the source tree via
this arbitrary instead of just issuing a custom "make" command, such a
command has to be re-entrant in the sense that subsequent perf runs
will re-use the possibly modified tree.
It would be pointless to try to mitigate or work around that caveat in
a tool purely aimed at Git developers, so this change makes no attempt
to do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Address a big blind spot in the tests for patterns containing \0. The
is_fixed() function considers any string that contains \0 fixed, even
if it contains regular expression metacharacters, those patterns are
currently matched with kwset.
Before this change removing that memchr(s, 0, len) check from
is_fixed() wouldn't change the result of any of the tests, since
regcomp() will happily match the part before the \0.
The kwset path is dependent on whether the the -i flag is on, and
whether the pattern has any non-ASCII characters, but none of this was
tested for.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
