Also, ensure usage help switches are in the same order.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Split out the functions that deal with the socketpair after
finishing git protocol handshake to receive the packed data into
a separate file, and use it in fetch-pack to keep/explode the
received pack data. We earlier had something like that on
clone-pack side once, but the list discussion resulted in the
decision that it makes sense to always keep the pack for
clone-pack, so unpacking option is not enabled on the clone-pack
side, but we later still could do so easily if we wanted to with
this change.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Morten Welinder says examples of resetting is really about
recovering from botched commit/pulls. I agree that pointers
from commands that cause a reset to be needed in the first place
would be very helpful.
Also reset examples did not mention "pull/merge" cases.
Signed-off-by: Junio C Hamano <junkio@cox.net>
clone-pack had some logic to accept subset of remote refs from
the command line and clone from there. However, it was never
used in practice and its problems were not found out so far.
This commit changes the command to output the object names of
refs to the standard output instead of making a clone of the
remote repository when explicit <head> parameters are given; the
output format is the same as fetch-pack.
The traditional behaviour of cloning the whole repository by
giving no explicit <head> parameters stays the same.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Recommend git over ssh direct to master.kernel.org, instead of
going over rsync to public machines, since this is meant to be a
procedure for kernel subsystem maintainers.
Also fix an obvious typo.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows git-am to accept single-message files as well as mboxes.
Unlike the previous version, this one doesn't need to be explicitly told
which one it is; rather, it looks to see if the first line is a From
line and uses it to select mbox mode or not.
I moved the logic to do all this into git-mailsplit, which got a new
user interface as result, although the old interface is still available
for backwards compatibility.
[jc: applied with two obvious fixes.]
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Talk about the following as well:
* git fetch --tags
* Use of "git push" as a one-man distributed development vehicle.
* Show example of remotes file for pulling and pushing.
* Annotate git-shell setup.
* Using Carl's update hook in a CVS-style shared repository.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The initial section of tutorial was too heavy on internal
workings for the first-time readers, so rewrite the introductory
section of git(7) to start with "not learning core git commands"
section and refer them to README to grasp the basic concepts,
then Everyday to give overview with task/role oriented examples
for minimum set of commands, and finally the tutorial.
Also add to existing note in the tutorial that many too
technical descriptions can be skipped by a casual reader.
I initially started to review the tutorial, with the objective
of ripping out the detailed technical information altogether,
but I found that the level of details in the initial couple of
sections that talk about refs and the object database in a
hands-on fashion was about rigth, and left all of them there. I
feel that reading about fsck-index and repack is too abstract
without being aware of these directories and files.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In order to support getting data into git with scripts, this adds a
--stdin option to git-hash-object, which will make it read from stdin.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Explicit <head> arguments to git-prune replaces, instead of
extends, the list of heads used for reachability analysis by
fsck-objects. By giving a subset of heads by mistake, objects
reachable only from other heads can be removed, resulting in a
corrupted repository.
This commit stops replacing the list of heads, and makes the
command line arguments to add to them instead for safety.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not replacing but always including our own refs may be more
desirable (and unarguably much safer), but at the same time I
have a suspicion that that might be forbidding a useful usage I
haven't thought of, so...
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds documentation for the -l and -n options to git-repack.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
-h and -t are aliases for --heads and --tags to git-ls-remote.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The documentation was lacking descriptions for the --signoff and --check
options to git-format-patch. It was also missing the following long
option-names: --output-directory (-o), --numbered (-n), --keep-subject
(-k), --author (-a), --date (-d), and --mbox (-m).
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* Added the -e option to the documentation of git-cherry-pick.
* Added the -e and --no-commit option to git-revert.
* Removed redundant case expression for -n as --no-edit (already taken by
--no-commit).
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The -- option has been added to the documentation of git-verify-pack.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added the following long options to documentation:
* --all
* --signoff
* --verify
* --no-verify
* --edit
Also added documentation for the -- option for terminating option parsing.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
All descriptions of the '--' option were the same except for that in
Documentation/git-merge-index.txt.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-am script actually transform --utf8 and --keep to -u and -k when
sent to git-mailinfo.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This provides (minimal) documentation for the --non-empty command-line
option to the pack-objects command.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Finish each sentence with a full stop.
Instead of saying 'directory index' 'directory cache' etc,
consistently say 'index'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new merge world order tells the merge strategies to leave
the cache unmerged and store the automerge result in the working
tree if automerge is not clean. This was done for the resolve
strategy and recursive strategy when no rename is involved, but
recording a conflicting merge in the rename case could not
easily be done by the recursive strategy.
This commit adds a new input format, in addition to the exsting
two, to "update-index --index-info".
(1) mode SP sha1 TAB path
The first format is what "git-apply --index-info"
reports, and used to reconstruct a partial tree
that is used for phony merge base tree when falling
back on 3-way merge.
(2) mode SP type SP sha1 TAB path
The second format is to stuff git-ls-tree output
into the index file.
(3) mode SP sha1 SP stage TAB path
This format is to put higher order stages into the
index file and matches git-ls-files --stage output.
To place a higher stage entry to the index, the path should
first be removed by feeding a mode=0 entry for the path, and
then feeding necessary input lines in the (3) format.
For example, starting with this index:
$ git ls-files -s
100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz
$ git update-index --index-info ;# interactive session -- input follows...
0 0000000000000000000000000000000000000000 frotz
100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz
100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz
The first line of the input feeds 0 as the mode to remove the
path; the SHA1 does not matter as long as it is well formatted.
Then the second and third line feeds stage 1 and stage 2 entries
for that path. After the above, we would end up with this:
$ git ls-files -s
100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz
100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz
This completes the groundwork for the new merge world order.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new option, --stage=<n>, lets you copy out from an unmerged,
higher stage. This is to help the new merge world order during
a nontrivial merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The merge-one-file used to leave the working tree intact, but
it has long been changed to leave the merge result there since
2a68a8659f commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The file parameter is better spelled just "file", not "any file
on the filesystem". We stress that in the description text
later anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
More $ shell prompts in examples.
Minor English grammar improvements.
Added a few "See Also"s.
Use back-ticks on more command examples.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The branch policy script I outlined was improved and polished by
Carl and posted on the list twice since then. It is a shame not
to pick it up, so replace the original outline in
howto/update-hook-example.txt with the latest from Carl.
Also talk about setting up git-shell to allow git-push/git-fetch
only SSH access to a shared repository host in the tutorial.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mention documentation pages that talk about update and
post-update hooks from git-push, because a frequently asked
question is "I want X to happen when I push" and people would
not know to look at git-receive-pack documentation until they
understand that is what runs on the other end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The table facility was nice in rendering HTML but was disastrous
for man page. Reword the text and do not use table for now.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Work-around asciidoc manpage trouble that does not seem to allow
more than one line in the SYNOPSIS section.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also work-around asciidoc manpage trouble that does not seem to
allow more than one line in the SYNOPSIS section.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This switch was not documented properly. I decided not to mention
the --no-edit switch in the git-cherry-pick documentation since
we always default to no editing.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this, you can say "git-show-branch topic/* master" to show
all the topic branches you have under .git/refs/heads/topic/ and
your master branch. Another example is "git-show-branch --list
v1.0*" to show all the v1.0 tags. You can disambiguate by
saying "heads/topic/*" to show only topic branches if you have
tags under .git/refs/tags/topic/ as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch aims to freshen up a bit the git-ls-tree documentation. It hints
that the list of paths are in fact patterns to be matched, explains the new
-t, --name-only and --name-status options, corrects the original autorship
information to refer to yours sincerely, corrects several grammar mistakes,
etc.
Since the documentation still deserves some significant work (at least
proper description of the pattern matching), I also added the stub notice.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds '-e' option to git-cat-file, to test for the existence
of the object.
This also cleans up the option-parsing in git-cat-file slightly.
[jc: HPA version had -n option which did rev-parse --verify; the
real value of this patch is the option parsing cleanup.]
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use the same trick Josef used to introduce line breaks for
git-mv documentation for now, to help HTML rendering. This
breaks manpages and we need to come up with a better solution.
Noticed by linux@horizon.com (No Name).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This hopefully concludes the latest updates that changes the
behaviour of the merge on an unsuccessful automerge. Instead of
collapsing the conflicted path in the index to show HEAD, we
leave it unmerged, now that diff-files can compare working tree
files with higher stages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The option description header was there without body text, confusingly
getting rendered as if the description for --tags applied to the option.
Noticed by Carl Baldwin.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Current default, merge-recursive, gives slightly different
message while working from merge-resolve which was used to
prepare the illustration in the tutorial.
Signed-off-by: Junio C Hamano <junkio@cox.net>
After thinking about it more, I realized that much of the change
I did on top of Linus' version does not make much sense. This
commit reverts it so that it by default shows diffs with stage0
paths or stage2 paths with working tree; the unmerged stage to
use can be overridden with -1/-2/-3 option (-2 is the default so
essentially is a no-op).
When the index file is unmerged, we are by definition in the
middle of a conflicting merge, and we should show the diff with
stage 2 by default. More importantly, paths without conflicts
are updated in the working tree and collapsed to stage0 in the
index, so showing diff with stage0 at the same time does not
hurt. In normal cases, stage0 entries should be in sync with
the working tree files and does not clutter the output. It even
helps the user to realize that the working tree has local
changes unrelated to the merge and remember to be careful not to
do a "git-commit -a" after resolving the conflicts.
When there is no unmerged entries, giving diff_unmerged_stage a
default value of 2 does not cause any harm, because it would not
be used anyway. So in all, always showing diff between stage0
paths and unmerged entries from a stage (defaulting to 2) is the
right thing to do, as Linus originally did.
Signed-off-by: Junio C Hamano <junkio@cox.net>
While resolving conflicted merge, it was not easy to compare the
working tree file with unmerged index entries. This commit
introduces new options -1/-2/-3 (with synonyms --base, --ours,
and --theirs) to compare working tree files with specified
stages.
When none of these options are given, the command defaults to -2
if the index file is unmerged, otherwise it acts as before.
[jc: majorly butchered from the version Linus originally posted.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
One "svn log" (or its equivalent) per revision adds delay and server load.
Instead, open two SVN connections -- one for the log, and one for the files.
Positive side effect: Only those log entries which actually contain data
are committed => no more empty commits.
Also, change the "-l" option to set the maximum revision to be pulled,
not the number of revisions.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In git-merge documentation, add a section to describe what happens to
the index and working tree during merge, and what their cleanliness
requirements are before the merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Specifying the value for a single letter, single dash option
parameter with equal sign looked funny, and more importantly
calling the flag to override encoding from utf-8 to something
else "-u" (obviously abbreviated from "utf-8") did not make any
sense. So spell it out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The two synopsis lines have to be prefixed with a space
so that asciidoc inserts a line break inbetween for the
manual page.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Dropped a fair amount of reundant code in favour of the library code
in path.c
Added option --strict-paths with documentation, with backwards
compatibility for whitelist entries with symlinks.
Everything that worked earlier still works insofar as I have
remembered testing it.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The "copying over packs" step is to prevent the objects
available in upstream repository to get expanted in the
subsystem maintainer tree, and is still valid if the upstream
repository do not live on the same machine. But if they are on
the same machine using objects/info/alternates is cleaner.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This basically translates the man-page from 'git-developerish' to plain
english, adding some almost-sample output from git-status so users can
recognize what will happen.
Also mention explicitly that --mixed updates the index, while --soft
doesn't. I understood the old text to mean "--mixed is exactly like
--soft, but verbose".
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extend the regex syntax of value_regex so that prepending an exclamation
mark means non-match:
[core]
quetzal = "Dodo" for Brainf*ck
quetzal = "T. Rex" for Malbolge
quetzal = "cat"
You can match the third line with
git-config-set --get quetzal '! for '
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... namely
--replace-all, to replace any amount of matching lines, not just 0 or 1,
--get, to get the value of one key,
--get-all, the multivar version of --get, and
--unset-all, which deletes all matching lines from .git/config
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When fetching/pulling from a remote repository the "--tags" option
can be used to pull tags too. Document that it will limit the pull
to only commits reachable from the tags.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now git-apply can grok binary replacement patches, give --binary
flag to git-am. As a safety measure, this is not by default
enabled, so that you do not let malicious e-mailed patch to
replace an arbitrary path with just a couple of lines (diff
index lines, the filename and string "Binary files "...) by
accident.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new option, --full-index, is introduced to diff family. This
causes the full object name of pre- and post-images to appear on
the index line of patch formatted output, to be used in
conjunction with --allow-binary-replacement option of git-apply.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new option, --allow-binary-replacement, is introduced.
When you feed a diff that records full SHA1 name of pre- and
post-image blob on its index line to git-apply with this option,
the post-image blob replaces the path if what you have in the
working tree matches the pre-image _and_ post-image blob is
already available in the object directory.
Later we _might_ want to enhance the diff output to also include
the full binary data of the post-image, to make this more
useful, but this is good enough for local rebasing application.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's by design a bit stupid (matching ^git rather than ^git-), so as
to work with 'gitk' and 'git' as well.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The program 'git' now has --exec-path which needs explaining.
Renamed old "DESCRIPTION" to "CORE GIT COMMANDS" to make room for
"OPTIONS" while following follow some sort of convention.
Also updated AUTHORS section to pat my own back a bit.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Many places in the documentation we still talked about reading
what commit is recorded in .git/HEAD or writing the new head
information into it, both assuming .git/HEAD is a symlink. That
is not necessarily so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch fixes some small problems with the documentation.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds documentation to quite a few command-line options.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch documents the -n command-line option to git-unpack-objects,
as it was previously undocumented.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because we use "lost-found" as the directory name to hold
dangling object names, it is confusing to call the command
git-lost+found, although it makes sense and is even cute ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pack-redundant documentation was encoded in latin1, which caused
asciidoc to barf, which expected to see utf-8. Run tcs to re-encode
it in utf-8.
Also just for fun try my name in Japanese in git-lost+found
documentation ;-)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just to avoid confusion that scripts poorly written by somebody
else ;-) might mistake this as a mount point, or backup tools
ignoring the directory. The latter is probably not a big loss,
however, considering that this directory's contents are to be
used while fresh anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch changes git-pack-redundant so that packfiles
in alternate object directories also are considered when
deciding which objects are redundant.
This functionality is controlled by the flag '--alt-odb'.
Also convert the other flags to the long form, and update
docs and git-repack accordingly.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames git-pack-intersect to git-pack-redundant
as suggested by Petr Baudis. The new name reflects what the
program does, rather than how it does it.
Also fix a small argument parsing bug.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a specialized hack to help no-base merges, but other
people might find it useful, so let's document it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch makes the documentation refer to the index
as index instead of cache, but some references still
remain. (e.g. git-update-index.txt)
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this patch the following commands all clone into the local directory
"repo". If repo exists, it will still barf.
git-clone git://host.xz/repo.git
git-clone /path/to/repo/.git
git-clone host.xz:repo.git
I ended up doing the same source-to-target sed'ing for all our company
projects, so it was easier to add it directly to git-clone.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch introduces -no-commit-id option for git-diff-tree, which
suppresses commit ID output.
[jc: dropped gitk part for now.]
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
You could also spell it ssh://host:/path/to/repo (or git+ssh,
ssh+git), but without method:// is shorter to type, so mention
only that one in the short and sweet list.
Noticed by Pasky.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git resolve" is being deprecated in favour of "git merge".
Update the documentation to reflect this.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds option '-d' to git-tag.sh and documents it.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As Pasky pointed out, building in templates directory showed
list of built template files which was unneeded. This commit
also fixes another build annoyance I recently left in by
accident.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/Makefile spent a lot of time to generate include
dependencies, which was quite noticeable especially during "make clean".
Rewrite it to generate just a single dependency file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Annoyingly enough, asciidoc wants the same number of '=' on the second
line as there are characters on the first line.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A script that can replay commits git into a CVS checkout. Tries to ensure the
sanity of the operation and supports mainly manual usage.
If you are reckless enough, you can ask it to autocommit when everything has
applied cleanly. Combined with a couple more scripts could become part of
a git2cvs gateway.
Should support adds/removes and binary files.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates documentation to use git branch -d foo in favour of
rm .git/refs/heads/foo
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While discussing Jon's ASCII art on merge operations with him, I
realized that the tutorial stops talking about the plumbing
details halfway. So fill in the gory details, and update the
examples to use 'git-merge', not 'git-resolve'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Refactored fetch options into separate fetch-options.txt.
Made git-merge use merge-options.
Made git-fetch use fetch-options.
Made git-pull use merge-options and fetch-options.
Added --help option to git-pull and git-format-patch scripts.
Rewrote Documentation/Makefile to dynamically determine
include dependencies.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This implements the idea Daniel Barkalow came up with, to match
the remotes/origin created by clone by default to the workflow I
use myself in my guinea pig repository, to have me eat my own
dog food.
We probably would want to use either .git/refs/local/heads/*
(idea by Linus) or .git/refs/heads/origin/* instead to reduce
the local ref namespace pollution.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add support for pushing to a remote repository using HTTP/DAV
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Josef Weidendorfer points out that git-clone documentation does not
mention the initial copying of remote branch heads into corresponding
local branches. Also clarify the purpose of the ref mappings description
in the "remotes" file and recommended workflow.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We do not accept multiple <refspecs> on one Pull:/Push: line
right now (we could lift this tentative workaround for the
broken refnames), but we have always accepted multiple such
lines, so use that form in the examples and discussion.
Also explicitly mention that Octopus is made only with an
explicit command line request and never from Pull: lines.
Add a couple of cross references.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Clarified and added notes for pull/push refspecs.
Converted to back-ticks for literal text examples.
[jc: Also fixed git-pull description that still talked about its
calling git-resolve or git-octopus (we do not anymore; instead
we just call git-merge). BTW, I am reasonably impressed by how
well "git-am -3" applied this patch, which had some conflicts
because I've updated the documentation somewhat.]
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Pasky and I did overlapping documentation independently; this is to
pick up better wordings from what he sent me.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Its use of git-ls-files --others is very nice, but sometimes gives
surprising results, so we'd better talk about it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The usability magic were hidden in the source code without being
documented, and even the maintainer did not know about them ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a companion patch for 211dcac643
commit, to add the newly introduced -P option to the list of options.
Signed-off-by: Junio C Hamano <junkio@cox.net>
-P:: <cvsps-output-file>
Instead of calling cvsps, read the provided cvsps output file. Useful
for debugging or when cvsps is being handled outside cvsimport.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
That notice was added by me for the emergency documentation, but Junio
already expanded it to a full-fledged manual page. This patch removes
the notice.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Simple description. It appears to be mostly internal command, but hey, it
is (it seems) the only undocumented one, so let's fix it up...
Also add a note about it to git-merge documentation.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For a 1.0 release, there is no need to maintain the
historical "Previously this command was known as..."
information on the doc splash page. It is noise;
command names should stand on their own now.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The repository to pull from can be a local repository, and as a
special case the current directory can be specified to perform
merges across local branches.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I don't think people really follow the links or think very abstractly at
all in the first place.
So I was thinking more of some explicit examples. I actually think every
command should have an example in the man-page, and hey, here's a patch to
start things off.
Of course, I'm not exactly "Mr Documentation", and I don't know that this
is the prettiest way to do this, but I checked that the resulting html and
man-page seems at least reasonable.
And hey, if the examples look like each other, that's just because I'm
also not "Mr Imagination".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new option, --numstat, shows number of inserted and deleted
lines for each path. It is similar to --stat output but is
meant to be more machine friendly by giving number of added and
deleted lines and unabbreviated paths.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update docs and usages regarding '-r' recursive option for git-diff-tree.
Remove '-r' from common diff options, mention it only for git-diff-tree.
Remove one extraneous use of '-r' with git-diff-files in get-merge.sh.
Sync the synopsis and usage string for git-diff-tree.
Signed-off-by: Chris Shoemaker <c.shoemaker at cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Pavel Roskin wondered what the SHA1 output at the beginning of
git-diff-tree was about. The only consumer of that information
so far is this git-patch-id command, which was inadequately
documented.
Signed-off-by: Junio C Hamano <junkio@cox.net>
According to my checks, these were the only commands not yet linked.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-name-rev tries to find nice symbolic names for commits. It does so by
walking the commits from the refs. When the symbolic name is ambiguous, the
following heuristic is applied: Try to avoid too many ~'s, and if two ambiguous
names have the same count of ~'s, take the one whose last number is smaller.
With "--tags", the names are derived only from tags.
With "--stdin", the stdin is parsed, and after every sha1 for which a name
could be found, the name is appended. (Try "git log | git name-rev --stdin".)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of having the user to edit the mail message, let the hand merge
result stored in .dotest/patch and continue, which is easier to manage.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It supersedes git-rename by adding functionality to move multiple
files, directories or symlinks into another directory. It also
provides according documentation.
The implementation renames multiple files, using the arguments from
the command line to produce an array of sources and destinations. In
a first pass, all requested renames are checked for errors, and
overwriting of existing files is only allowed with '-f'. The actual
renaming is done in a second pass. This ensures that any error
condition is checked before anything is changed.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
New options --timeout, --init-timeout, --export-all and whitelist support
were added to git-daemon, but noone bothered to also add the proper
documentation. This patch aims to fix that.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-am script is nowhere called and nowhere (including itself)
explained, and the name isn't helpful either. For those like me who will
wonder what is it about, add some documentation stub for it to the
documentation.
I probably got something wrong and I don't feel like investigating all the
options - this is just kind of "emergency" docs.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The documentation was lazily sharing the argument description across these
commands.
Lazy may be a way of life, but that does not justify confusing others ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
When extra paths arguments are given, git-checkout reverts only those
paths to either the version recorded in the index or the version
recorded in the given tree-ish.
This has been on the TODO list for quite a while.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus says he does not use it (and the thinking behind its initial
introduction), and neither Cogito nor StGIT uses it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The documentation for git-whatchanged is meant to describe only
the most frequently used options from git-diff-tree. Because "why
doesn't it show merges" was asked more than once, we'd better
describe '-m' option there.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Lacking reliable symlinks, the instructions in the tutorial did not work
in a cygwin setup. Also, a few outputs were not correct.
This patch fixes these, and adds a test case which follows the
instructions of the tutorial (except git-clone, -fetch and -push, which I
have not done yet).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With new option --keep, or a configuration item clone.keeppack (we
need a better name, or start allowing dash,"clone.keep-pack"), the packed
data downloaded while cloning is saved as a pack in .git/objects/pack/
locally, with index generated for it with git-index-pack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-index-pack builds a pack index file for an existing packed
archive. With this utility a packed archive which was transferred
without the corresponding pack index can be added to objects/pack/
without repacking.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-show-branch acquires two new options. --sha1-name to name
commits using the unique prefix of their object names, and
--no-name to not to show names at all.
This was outlined in <7vk6gpyuyr.fsf@assigned-by-dhcp.cox.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some SVN repositories that are accessible through HTTP don't like when I
retrieve files using SVN methods ("internal server error").
Therefore, I added an option to get the contents using (persistent) HTTP
directly. This also reduces round-trip time, from two or three requests
down to one.
Also corrected error handling a bit.
Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de>
The synopsis of the manpages should use the hyphenated version of the git
commands. Adapt the remaining offenders.
Signed-off-by: Christian Meder <chris@absolutegiganten.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The svn library has a serious memory leak.
Added a new option (-l NUM) which causes git-svnimport to exit cleanly
after fetching that many changes, in order to .
Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de>
Add a flag to skip initial revisions: some SVN repositories have
initial setup cruft in their logs which we might want to ignore.
Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de>
As the name suggests, this script imports from SVN.
Only "normal" SVN repositories (with single trunk/, branches/, and tags/
subdrectories) are supported. Incremental imports require preserving
the file .git/svn2git.
Signed-Off-by: Matthias Urlichs <smurf@smurf.noris.de>
exports $prefix and makes Documentation/Makefile following it also.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates last place where checkout-cache gets mentioned wrongly
for checkout-index.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After git-apply fails, attempt to find a base tree that the patch
cleanly applies to, and do a three-way merge using that base tree into
the current index, if .dotest/.3way file exists. This flag can be
controlled by giving -m flag to git-applymbox command.
When the fall-back merge fails, the working tree can be resolved the
same way as you would normally hand resolve a conflicting merge.
When making commit, use .dotest/final-commit as the log message
template. Or you could just choose to 'git-checkout-index -f -a'
to revert the failed merge.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The current "git tag -s" thing always uses the tagger name as the signing
user key, which is very irritating, since my key is under my email
address, but the tagger key obviously contains the actual machine name
too.
Now, I could just use "GIT_COMMITTER_EMAIL" and force it to be my real
email, but I actually think that it's nice to see which machine I use for
my work.
So rather than force my tagger ID to have to match the gpg key name, just
support the "-u" flag to "git tag" instead. It implicitly enables signing,
since it doesn't make any sense without it. Thus:
git tag -u <gpg-key-name> <tag-name> [<tagged-object>]
will use the named gpg key for signing.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The original plan was to do 3-way merge between local working tree,
index and the patch being applied, but that was never implemented.
Retire the flag to control its behaviour.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fixes focuses on improving the HTML output. Most noteworthy:
- Fix the Makefile to also make various *.html files depend on
included files.
- Consistently use 'NOTE: ...' instead of '[ ... ]' for additional
info.
- Fix ending '::' for description lists in OPTION section etc.
- Fix paragraphs in description lists ending up as preformated text.
- Always use listingblocks (preformatted text wrapped in lines with -----)
for examples that span empty lines, so they are put in only one HTML
block.
- Use '1.' instead of '(1)' for numbered lists.
- Fix linking to other GIT docs.
- git-rev-list.txt: put option descriptions in an OPTION section.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The documentation for git-clone is behind the actual command.
I have been getting tired of reading the shell script to see
what the arguments are so here is an update of the actual documentation.
Signed-off-by: Eric Biederman <ebiederman@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Useful if you have a file whose name starts with a dash.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When many paths are modified, rename detection takes a lot of time.
The new option -l<num> can be used to disable rename detection when
more than <num> paths are possibly created as renames.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix missing symbol explanations, a few incorrect cases, and add
two-way merge rules.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Well, this makes it even more clear that we need the packet reader and
friends to use the daemon logging code. :/ Therefore, we at least indicate
in the "Disconnect" log message if the child process exitted with an error
code or not.
Idea by Linus.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document the best way to show the change introduced by a
commit, based on the suggestion by Linus on the list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the tutorial, there is a section entitled "Checking it out"
that shows how to use diff log and whatchanged to insect some
of the repository state.
As the phrase "checkout" ususally carries some baggage WRT
other revision control mechanism, I suggest that we re-title
this section something like "Inspecting Changes".
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The textual diff generation with built-in '-p' in diff-* brothers has
proven to be useful enough that git-diff-helper outlived its usefulness.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some old scripts might still use git-rev-tree, but it really is
clearly inferior in every way to git-rev-list that such scripts should
be fixed anyway. Fixing them should be pretty easy.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-export was done as a concept example on how easy it is to export
the git data to something else. It's much less powerful than any
number of trivial one-liner scripts now, and real exporters would not
ever use git-export.
It's obviously much less powerful than "git-whatchanged", or just
about any combination of git-rev-list + git-diff-tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Randal L. Schwartz noticed that 'make install' does not rebuild what
is installed. Make the 'install' rule depend on 'man'.
I noticed also 'touch' of the source files were used to express include
dependencies, which is a no-no. Rewrite it to do dependencies properly,
and add missing include dependencies while we are at it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add -m/--modified to show files that have been modified wrt. the index.
[jc: The original came from Brian Gerst on Sep 1st but it only checked
if the paths were cache dirty without actually checking the files were
modified. I also added the usage string and a new test.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Somehow I missed it when we updated read-tree to support the recursive
merge strategy. Also -i should require -m as well, which the command
did not check.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduce an asciidoc.conf file with the purpose of adding a gitlink:
macro which will improve the manpage output.
Original cogito patch by Jonas Fonseca <fonseca@diku.dk>;
asciidoc.conf from that patch was further enhanced to use the proper
DocBook tag <citerefentry> for references to man pages.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
An earlier commit causes a mismatch in <emphasis> and <superscript>
tags, one way of fixing it is having no more than one caret symbol per
line, which is the only solution I found in the asciidoc
documentation. Ugly, but it works.
[jc: ugly indeed but that is not Peter's fault.]
Signed-off-by: Peter Hagervall <hager@cs.umu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix the "superscript" problem on the git-rev-list doc page.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... in order to please Solaris 'install'. GNU install is not harmed
with this.
[jc: Documentation/Makefile also fixed.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
New "merges" headline, clarified some parts that were not easy to understand.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Updated and expanded the command description, and added a reference of the
command line options.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
AsciiDoc replace '--' with em-dash (—) by default. em-dash
looks a lot like a single long dash and it's very confusing when
we are talking about command options.
Section 21.2.8 'Replacements' of AsciiDoc's User Guide says that a
backslash in front of double dash prevent the replacement. This
patch does just that.
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The --list option is what 'git branch' without parameter should
have been; it shows the one-line commit message for each branch
name. The --independent option is used to filter out commits
that can be reachable from other commits, to make detection of
fast forward condition in multi-head merge easier.
Signed-off-by: Junio C Hamano <junkio@cox.net>
There was a lingering reference to the git-*-scripts in
the tutorial. This patch reworks that paragraph a bit.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
parse-remote and rev-parse gets full documentation. Add skeleton for
archimport. Link them from the main git(7) page. Also move git-daemon
and git-request-pull out of 'undocumented' section.
Signed-off-by: Junio C Hamano <junkio@cox.net>
... and add a copyright notice.
[jc: also move its entry in git.txt from undocumented section.]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch changes git-cvsimport-script so that it creates tag objects
instead of refs to commits, and adds an option, -u, to convert
underscores in branch and tag names to dots (since CVS doesn't allow
dots in branches and tags.)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace references to "read-cache" with references to git-read-tree in the
documentation. I chose that because reference say "see read-cache about
stages", and stages are explained in git-read-tree.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is more detailed instruction for `project lead` later in
the tutorial to talk about the same, but at this point in the
flow of tutorial, the first time reader has no way of knowing it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Finally I bit the bullet and did a full sweep of this document.
The changes are mostly clarifications, adjusting old terminology
to the glossary compatible one, and asciidoc formatting.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mostly making the formatted html prettier.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 7adf1f15ebe074d4767df941817a6cf86d8e2533 commit)
Setting the wraplength to zero keeps the bird from trimming WS.
Signed-off-by: <gitzilla@gmail.com>
(cherry picked from 1d535d525d6a0ddddc3755065d721278bc5f0aff commit)
Now the rebase is rewritten to use git cherry-pick, there is no user
for that ancient script. I've checked Cogito and StGIT to make sure
they do not use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Explain that an asterisk will be displayed in front of the current
branch when you run `git branch' to see which are available.
Signed-off-by: Amos Waterland <apw@rossby.metr.ou.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- It does not matter how I read git list. What matters is that
I do not necessarily read everything on it.
- Talk a bit about how to use applymbox to check one's own
patches.
- Talk a bit about PGP signed patches.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add some documentation.
Text taken from the the commit messages and the command sources.
Signed-off-by: <gitzilla@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Gitzilla updated bunch of undocumented command pages, so move the
entries in the main documentation index around to put them in proper
category. Ordering within category will be fixed later.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Generate docs for gitk. Install them in the right deb package.
Signed-off-by: Tommi Virtanen <tv@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Describe a DAG and octopus, and change wording of tree object.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Various updates and cleanups for my howto on using branches in GIT
as a Linux subsystem maintainer. Three categories of changes:
1) Updates for new features in GIT 0.99.5
2) Changes to use "git fetch" rather than "git pull" to update
local linus branch.
3) Cleanups suggested by Len Brown
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Use "working tree", "object name", "repository" as the canonical
term consistenly.
- Start formatting tutorial with asciidoc.
- Mention shared repository style of cooperation.
- Update with some usability enhancements recently made, such as
the "-m" flag to the "git commit" command.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The text does not say anything interesting, but at least the
author list should reflect something close to reality.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When showing only one branch a lot of default output becomes redundant,
so clean it up a bit, and document what is shown. Retire the earlier
implementation "git-show-branches-script".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Changes to the descriptions of tree and tag objects, a link for ent, and
descriptions for rewind, rebase and core git were added.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Small fix (use "git branch" to make branches, rather than "git checkout -b").
Optimization for trivial patches (apply to release and merge to test).
Three sample scripts appended.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also includes a script which does the sorting, and introduces
hyperlinks for every described term.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Based on the discussion on the git list, here are some important changes
to the glossary. (There is no cache, but an index. Use "object name"
rather than "SHA1". Reorder. Clarify.)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added -m and -M flags for git-cvsimport to detect merge commits in cvs.
While this trusts the commit message, in repositories where merge commits
indicate 'merged from FOOBRANCH' the import works surprisingly well.
Even if some merges from CVS are bogus or incomplete, the resulting
branches are in better state to go forward (and merge) than without any
merge detection.
Signed-off-by: Martin Langhoff <martin.langhoff@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: This is the version without asciidoc cross references;
Johannes says that the cross referenced one is generated from
this file using a Perl script, so I am placing this as the
source, and expecting to later receive the script and a Makefile
entry or two to massage this file into the final HTML or
whatever form.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
At one place in Documentation/tutorial.txt and several in the base
README, its was wrongly used in place of it's or vice versa. One
instance remains somewhere in Documentation/howto/, which I didn't
correct because it's in a quotation.
Signed-off-by: Greg Louis <glouis@dynamicro.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I track a CVS project which has a branch with a '/' in the branch name.
Since git wants the branch name to be a file name at the same time,
substitute that character to a '-' by default (override with "-s <subst>").
This should work well, despite the fact that a division and a difference
are completely different :-)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There are many programs like git-add not described at all, and the
organization of the list of commands may be suboptimal, but we have to
start somewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Early versions of git-cvsimport defaulted to using preexisting keyword
expansion settings. This change preserves compatibility with existing cvs
imports and allows new repository migrations to kill keyword expansion.
After exploration of the different -k modes in the cvs protocol, we use -kk
which kills keyword expansion wherever possible. Against the protocol
spec, -ko and -kb will sometimes expand keywords.
Should improve our chances of detecting merges and reduce imported
repository size.
Signed-off: Martin Langhoff <martin.langhoff@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-cvsimport-script had a copule of small bugs that prevented me
from importing a big CVS repository.
The first was that it didn't handle removed files with a multi-digit
primary revision number.
The second was that it was asking the CVS server for "F" messages,
although they were not handled.
I also updated the documentation for that script to correspond to
actual flags.
Signed-off-by: David K?5gedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: the patch forgot to update the main git.txt documentation,
making all these new documentation practically no-op, so I added
a minimum attempt linking them from there.]
Signed-off-by: Ryan Anderson <ryan@michonline.com>
I would eventually like to move this to become a part of the tutorial,
but anyway, this was an excellent post that describes how topic
branches can be used to keep track of local changes.
Often I find myself wanting to do quick branches check when I am
not in the windowing environment and cannot run gitk.
This stupid script shows commits leading to the heads of
interesting branches with indication which ones belong to which
branches, so that fork point is somewhat discernible without
using gitk.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I think these are useful, and I think putting them in a new "howto"
directory might help some users until we get to the point of splitting
up the tutorial to be easier to read.
Given the authorship, I think it's safe to put these in the repository.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Linus brought up that documentation for many commands have
incorrect attribution. I started counting lines again, but
ended up adding a handful of missing manual pages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not that I have stricter patch submission standard than ordinary
projects, I wanted to have it to make sure people understand
what they are doing when they add their own Signed-off-by line.
Signed-off-by: Junio C Hamano <junkio@cox.net>
$DESTDIR is more usual during the build than $dest and is what
is usually used in the makefiles, so let's use it too.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a beginning of resurrecting the multi-head pulling support
for git-fetch-pack command. The git-fetch-script wrapper still
only knows about fetching a single head, without renaming, so it is
not very useful unless you directly call git-fetch-pack itself yet.
It also fixes a longstanding obsolete description of how the command
discovers the list of local commits.
The store operation was never useful because we needed to fetch
the objects needed to complete the reference. Remove it.
The fetch command fetch multiple references shortly to
replace the lost "store" functionality in more a generic way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: Johannes spent time and effort to see how consistent our
use of terminilogy is, and as a byproduct made these corrections
not related to the terminology unification. I really appreciate
it.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The king penguin said:
It has no point any more, all the tools check the file
status on their own, and yes, the thing should probably be
removed.
and the faithful servant makes it so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Describe the renaming push. The wording is horrible and I would
appreciate a rewrite, but it is better than nothing ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier one conflated update and post-update hooks for no
good reason. Correct that ugly hack. Now post-update hooks
will take the list of successfully updated refs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-merge-cache reporting failed merge program is undesirable for
Cogito, since it emits its own more appropriate error message in that
case. However, I want to show other possible git-merge-cache error
messages. So -q will just silence this particular error.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix a few typos.
Adapt to git-http-pull not borking on packed repositories.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Yes, push does not lock, but that does not mean it is not
meant for multi-user repository. It just ought to perform
correctly without using locks.
- Let's not pretend we know _the_ right way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just before updating a ref,
$GIT_DIR/hooks/update refname old-sha1 new-sha1
is called if executable. The hook can decline the ref to be
updated by exiting with a non-zero status, or allow it to be
updated by exiting with a zero status. The mechanism also
allows e.g sending of a mail with pushed commits on the remote
repository.
Documentation update with an example hook is included.
jc: The credits of the basic idea and initial implementation go
to Josef, but I ended up rewriting major parts of his patch, so
bugs are all mine. Also I changed the semantics for the hook
from his original version (which were post-update hook) so that
the hook can optionally decline to update the ref, and also can
be used to implement the overall cleanups. The latter was
primarily to implement a suggestion from Linus that calling
update-server-info should be made optional.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document new (and not-so-new) flags of git-rev-list.
Signed-off-By: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Simple whitespace-related tidyups ensuring style consistency.
This is carried over from my old git-pb branch.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Darrin Thompson noticed when he was showing off GIT to others
that the use of filenames "a" and "b" in the tutorial example
was unnecessarily confusing, especially with our "patch -p1"
prefix a/ and b/, without giving us any patch. I was very
tempted to change them back to l/ and k/ prefixes, but decided
to restrain myself and update the tutorial instead ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
