When git is passed the --paginate option, starting up a pager requires
deciding what pager to start, which requires access to the core.pager
configuration.
At the relevant moment, the repository has not been searched for yet.
Attempting to access the configuration at this point results in
git_dir being set to .git [*], which is almost certainly not what was
wanted. In particular, when run from a subdirectory of the toplevel,
git --paginate does not respect the core.pager setting from the
current repository.
[*] unless GIT_DIR or GIT_CONFIG is set
So delay the pager startup when possible:
1. run_argv() already commits pager choice inside run_builtin() if a
command is found. For commands that use RUN_SETUP, waiting until
then fixes the problem described above: once git knows where to
look, it happily respects the core.pager setting.
2. list_common_cmds_help() prints out 29 lines and exits. This can
benefit from pagination, so we need to commit the pager choice
before writing this output.
Luckily ‘git’ without subcommand has no other reason to access a
repository, so it would be intuitive to ignore repository-local
configuration in this case. Simpler for now to choose a pager
using the funny code that notices a repository that happens to be
at .git. That this accesses a repository when it is very
convenient to is a bug but not an important one.
3. help_unknown_cmd() prints out a few lines to stderr. It is not
important to paginate this, so don’t.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git is passed the --paginate option, starting up a pager requires
deciding what pager to start, which requires access to the core.pager
configuration. If --paginate is handled before searching for the
git dir, this configuration will be missed.
In other words, with --paginate and only with --paginate, any
repository-local core.pager setting is being ignored [*].
[*] unless the git directory is ./.git or GIT_DIR or GIT_CONFIG was
set explicitly.
Add a test to demonstrate this counterintuitive behavior. Noticed
while reading over a patch by Duy that fixes it.
Cc: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test choice of pager at several stages of repository setup. This
provides some (admittedly uninteresting) examples to keep in mind when
considering changes to the setup procedure.
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current tests test pager configuration for ‘git log’, but other
commands use a different setup procedure and should therefore be
tested separately. Add a helper to make this easier.
This patch introduces the helper and changes some existing tests to
use it. The only functional change should be the introduction of ‘git
log - ’ to a few test descriptions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we may segfault with too few parameters.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Bert Wesarg <Bert.Wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cp/textconv-cat-file:
git-cat-file.txt: Document --textconv
t/t8007: test textconv support for cat-file
textconv: support for cat_file
sha1_name: add get_sha1_with_context()
$Test::Builder::Test was only made into an `our' variable in 0.94
released in September 2009, older distros are more likely to have 0.92
or earlier. Use the singleton Test::More->builder constructor instead.
The exit() call was also unportable to <0.94. Just output a meaningful
exit code if the ->is_passing method exists. The t9700-perl-git.sh
test only cares about stderr output, so this doesn't affect test
results when using older Test::More modules.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some use cases it is not desirable that "git status" considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree (this was the behavior before
1.7.0). An example for that are scripts which just want to check for
submodule commits while ignoring any changes to the work tree. Also users
having large submodules known not to change might want to use this option,
as the - sometimes substantial - time it takes to scan the submodule work
tree(s) is saved when using the "dirty" parameter.
And if you want to ignore any changes to submodules, you can now do that
by using this option without parameters or with "all" (when the config
option status.submodulesummary is set, using "all" will also suppress the
output of the submodule summary).
A new function handle_ignore_submodules_arg() is introduced to parse this
option new to "git status" in a single location, as "git diff" already
knew it.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tests used a mixture of 'echo -n' (which is non-portable) and either
test_cmp or diff to check if a file is empty. The much easier and portable
method to check for an empty file is '! test -s'
While we're in t4027, there was an excess test_done. Remove it.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Internally, --track and --orphan still use the 'safe' -b, not -B.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lines that begin with "ok" confuse the TAP harness because it can't
distinguish them from a test counter. Work around the issue by saying
"pass" instead, which isn't a reserved TAP word.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests in the testsuite will emit a line that doesn't end with a
newline, right before we're about to output "ok" or "not ok". This
breaks the TAP output with "Tests out of sequence" errors since a TAP
harness can't understand this:
ok 1 - A test
[some output here]ok 2 - Another test
ok 3 - Yet another test
Work around it by emitting an empty line before we're about to say
"ok" or "not ok", but only if we're running under --verbose and
HARNESS_ACTIVE=1 is set, which'll only be the case when running under
a harnesses like prove(1).
I think it's better to do this than fix each tests by adding `&& echo'
everywhere. More tests might be added that break TAP in the future,
and a human isn't going to look at the extra whitespace, since
HARNESS_ACTIVE=1 always means a harness is reading it.
The tests that had issues were:
t1007, t3410, t3413, t3409, t3414, t3415, t3416, t3412, t3404,
t5407, t7402, t7003, t9001
With this workaround the entire test suite runs without errors under:
prove -j 10 ./t[0-9]*.sh :: --verbose
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before TAP we just ran the Perl test and assumed that it failed if
nothing was printed on STDERR. Continue doing that, but introduce a
`test_external_has_tap' variable which tests can set to indicate that
they're outputting TAP.
If it's set we won't output a test plan, but trust the external test
to do so. That way we can make external tests work with a TAP harness,
but still maintain compatibility with test-lib's own way of tracking
tests through the test-results directory.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TAP, the Test Anything Protocol, is a simple text-based interface
between testing modules in a test harness. test-lib.sh's output was
already very close to being valid TAP. This change brings it all the
way there. Before:
$ ./t0005-signals.sh
* ok 1: sigchain works
* passed all 1 test(s)
And after:
$ ./t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
The advantage of using TAP is that any program that reads the format
(a "test harness") can run the tests. The most popular of these is the
prove(1) utility that comes with Perl. It can run tests in parallel,
display colored output, format the output to console, file, HTML etc.,
and much more. An example:
$ prove ./t0005-signals.sh
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.03 usr 0.00 sys + 0.01 cusr 0.02 csys = 0.06 CPU)
Result: PASS
prove(1) gives you human readable output without being too
verbose. Running the test suite in parallel with `make test -j15`
produces a flood of text. Running them with `prove -j 15 ./t[0-9]*.sh`
makes it easy to follow what's going on.
All this patch does is re-arrange the output a bit so that it conforms
with the TAP spec, everything that the test suite did before continues
to work. That includes aggregating results in t/test-results/, the
--verbose, --debug and other options for tests, and the test color
output.
TAP harnesses ignore everything that they don't know about, so running
the tests with --verbose works:
$ prove ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh .. Terminated
./t0005-signals.sh .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.01 sys + 0.01 cusr 0.01 csys = 0.05 CPU)
Result: PASS
Just supply the -v option to prove itself to get all the verbose
output that it suppresses:
$ prove -v ./t0005-signals.sh :: --verbose --debug
./t0005-signals.sh ..
Initialized empty Git repository in /home/avar/g/git/t/trash directory.t0005-signals/.git/
expecting success:
test-sigchain >actual
case "$?" in
143) true ;; # POSIX w/ SIGTERM=15
3) true ;; # Windows
*) false ;;
esac &&
test_cmp expect actual
Terminated
ok 1 - sigchain works
# passed all 1 test(s)
1..1
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.01 cusr 0.01 csys = 0.04 CPU)
Result: PASS
As a further example, consider this test script that uses a lot of
test-lib.sh features by Jakub Narebski:
#!/bin/sh
test_description='this is a sample test.
This test is here to see various test outputs.'
. ./test-lib.sh
say 'diagnostic message'
test_expect_success 'true test' 'true'
test_expect_success 'false test' 'false'
test_expect_failure 'true test (todo)' 'true'
test_expect_failure 'false test (todo)' 'false'
test_debug 'echo "debug message"'
test_done
The output of that was previously:
* diagnostic message # yellow
* ok 1: true test
* FAIL 2: false test # bold red
false
* FIXED 3: true test (todo)
* still broken 4: false test (todo) # bold green
* fixed 1 known breakage(s) # green
* still have 1 known breakage(s) # bold red
* failed 1 among remaining 3 test(s) # bold red
But is now:
diagnostic message # yellow
ok 1 - true test
not ok - 2 false test # bold red
# false
ok 3 - true test (todo) # TODO known breakage
not ok 4 - false test (todo) # TODO known breakage # bold green
# fixed 1 known breakage(s) # green
# still have 1 known breakage(s) # bold red
# failed 1 among remaining 3 test(s) # bold red
1..4
All the coloring is preserved when the test is run manually. Under
prove(1) the test performs as expected, even with --debug and
--verbose options:
$ prove ./example.sh :: --debug --verbose
./example.sh .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/4 subtests
(1 TODO test unexpectedly succeeded)
Test Summary Report
-------------------
./example.sh (Wstat: 256 Tests: 4 Failed: 1)
Failed test: 2
TODO passed: 3
Non-zero exit status: 1
Files=1, Tests=4, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.00 cusr 0.01 csys = 0.03 CPU)
Result: FAIL
The TAP harness itself doesn't get confused by the color output, they
aren't used by test-lib.sh stdout isn't open to a terminal (test -t 1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be useful to do something like:
git rev-list --reverse master -- README | git cherry-pick -n --stdin
without using xargs.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/cherry-pick-series:
Documentation/revert: describe passing more than one commit
Documentation/cherry-pick: describe passing more than one commit
revert: add tests to check cherry-picking many commits
revert: allow cherry-picking more than one commit
revert: change help_msg() to take no argument
revert: refactor code into a do_pick_commit() function
revert: use run_command_v_opt() instead of execv_git_cmd()
revert: cleanup code for -x option
* jc/rev-list-ancestry-path:
revision: Turn off history simplification in --ancestry-path mode
revision: Fix typo in --ancestry-path error message
Documentation/rev-list-options.txt: Explain --ancestry-path
Documentation/rev-list-options.txt: Fix missing line in example history graph
revision: --ancestry-path
* tc/merge-m-log:
merge: --log appends shortlog to message if specified
fmt-merge-msg: add function to append shortlog only
fmt-merge-msg: refactor merge title formatting
fmt-merge-msg: minor refactor of fmt_merge_msg()
merge: rename variable
merge: update comment
t7604-merge-custom-message: show that --log doesn't append to -m
t7604-merge-custom-message: shift expected output creation
* pc/remove-warn:
Remove a redundant errno test in a usage of remove_path
Introduce remove_or_warn function
Implement the rmdir_or_warn function
Generalise the unlink_or_warn function
As Brandon noticed, a regular expression match given to 'expr' is already
anchored at the beginning. Some versions of expr even complain about this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fake "less" script was already created in a previous test titled
'setup: fake "less"', so it is redundant. Additionally, it is broken since
the redirection of 'cat' is to a file named 'less', but the chmod operates
on the file named by the $less variable which may not contain the value
'less'.
So, just remove this code, and rely on the creation of the fake "less"
script performed earlier within the test script.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fake "less" script was not being made executable. This can cause the
tests that follow to fail. This failure is not apparent on platforms which
have DEFAULT_PAGER set to the string "less", since lib-pager.sh will have
set the $less variable to "less" and the SIMPLEPAGER prerequisite will have
been set, and so the "less" script will have already been created properly
and made executable in test 2 'git grep -O'. On platforms which set
DEFAULT_PAGER to something like "more", no such script will have been
previously created, and tests 7 and 8 will fail.
So, add a call to chmod to make the fake "less" script executable.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regular expressions matched by 'expr' have an implicit '^' at the beginning
of them and so are anchored to the beginning of the string. Using the '^'
character to mean "match at the beginning", is redundant and could produce
the wrong result if 'expr' implementations interpret the '^' as a literal
'^'. Additionally, GNU expr 5.97 complains like this:
expr: warning: unportable BRE: `^[a-z][a-z]*$': using `^' as the first character of the basic regular expression is not portable; it is being ignored
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/async-thread:
fast-import: die_nicely() back to vsnprintf (reverts part of ebaa79f)
Enable threaded async procedures whenever pthreads is available
Dying in an async procedure should only exit the thread, not the process.
Reimplement async procedures using pthreads
Windows: more pthreads functions
Fix signature of fcntl() compatibility dummy
Make report() from usage.c public as vreportf() and use it.
Modernize t5530-upload-pack-error.
Conflicts:
http-backend.c
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
* bc/portable:
Remove python 2.5'isms
Makefile: add PYTHON_PATH to GIT-BUILD-OPTIONS
t/aggregate-results: accomodate systems with small max argument list length
t/t7006: ignore return status of shell's unset builtin
t/t5150: remove space from sed script
git-request-pull.sh: remove -e switch to shell interpreter which breaks ksh
t/t5800: skip if python version is older than 2.5
Test the correct functionning of textconv with cat-file <sha1:blob>
and cat-file HEAD^ <file>. Test the case when no driver is specified
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-plackup:
git-instaweb: Add support for running gitweb via 'plackup'
git-instaweb: Wait for server to start before running web browser
git-instaweb: Remove pidfile after stopping web server
git-instaweb: Configure it to work with new gitweb structure
git-instaweb: Put httpd logs in a "$httpd_only" subdirectory
gitweb: Set default destination directory for installing gitweb in Makefile
gitweb: Move static files into seperate subdirectory
* tc/merge-m-log:
merge: --log appends shortlog to message if specified
fmt-merge-msg: add function to append shortlog only
fmt-merge-msg: refactor merge title formatting
fmt-merge-msg: minor refactor of fmt_merge_msg()
merge: rename variable
merge: update comment
t7604-merge-custom-message: show that --log doesn't append to -m
t7604-merge-custom-message: shift expected output creation
Conflicts:
builtin.h
Test the correct functionning of textconv with blame <file> and blame HEAD^ <file>.
Test the case when no driver is specified.
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email passes on an 8bit mail as-is even if it does not
declare a content-type. Because the user can edit email between
format-patch and send-email, such invalid mails are unfortunately not
very hard to come by.
Make git-send-email stop and ask about the encoding to use if it
encounters any such mail. Also provide a configuration setting to
permanently configure an encoding.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-stash-orphaned-file:
stash tests: stash can lose data in a file removed from the index
stash: Don't overwrite files that have gone from the index
* jn/shortlog:
pretty: Respect --abbrev option
shortlog: Document and test --format option
t4201 (shortlog): Test output format with multiple authors
t4201 (shortlog): guard setup with test_expect_success
Documentation/shortlog: scripted users should not rely on implicit HEAD
* sp/maint-dumb-http-pack-reidx:
http.c::new_http_pack_request: do away with the temp variable filename
http-fetch: Use temporary files for pack-*.idx until verified
http-fetch: Use index-pack rather than verify-pack to check packs
Allow parse_pack_index on temporary files
Extract verify_pack_index for reuse from verify_pack
Introduce close_pack_index to permit replacement
http.c: Remove unnecessary strdup of sha1_to_hex result
http.c: Don't store destination name in request structures
http.c: Drop useless != NULL test in finish_http_pack_request
http.c: Tiny refactoring of finish_http_pack_request
t5550-http-fetch: Use subshell for repository operations
http.c: Remove bad free of static block
* sp/maint-describe-tiebreak-with-tagger-date:
describe: Break annotated tag ties by tagger date
tag.c: Parse tagger date (if present)
tag.c: Refactor parse_tag_buffer to be saner to program
tag.h: Remove unused signature field
tag.c: Correct indentation
* rc/maint-curl-helper:
remote-curl: ensure that URLs have a trailing slash
http: make end_url_with_slash() public
t5541-http-push: add test for URLs with trailing slash
Conflicts:
remote-curl.c
* hg/maint-attr-fix:
attr: Expand macros immediately when encountered.
attr: Allow multiple changes to an attribute on the same line.
attr: Fixed debug output for macro expansion.
* mh/status-optionally-refresh:
t7508: add a test for "git status" in a read-only repository
git status: refresh the index if possible
t7508: add test for "git status" refreshing the index
We have the '+' modifiier which helps combine format specifiers which
may possibly be empty, e.g. '%s%+b%n'.
Introduce an analogous ' ' (space) modifier which adds a space before
non-empty items. This helps assemble "one line type" format specifiers.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git uses the version string as the signature for all
patches output by format-patch. Many employers (mine included)
require the use of a signature on all outgoing mails. In a
format-patch | send-email workflow there isn't an easy way to modify
the signature without breaking the pipe and manually replacing the
version string with the signature required. Instead of doing all that
work, add an option (--signature) and a config variable
(format.signature) to replace the default git version signature when
formatting patches.
This does modify the original behavior of format-patch a bit. First
off the version string is now placed in the cover letter by default.
Secondly, once the configuration variable format.signature is added
to the .config file there is no way to revert back to the default
git version signature. Instead, specifying the --no-signature option
will remove the signature from the patches entirely.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In certain situations, commit authorship can consist of an invalid
e-mail address. For example, this is the case when working with git svn
repos where the author email has had the svn repo UUID appended such as:
author@example.com <author@example.com@deadbeef-dead-beef-dead-beefdeadbeef>
Given such an address, mailinfo extracts the authorship incorrectly as
it assumes a valid domain. However, when rebasing the original
authorship should be preserved irrespective of its validity as an email
address.
Using get_author_ident_from_commit instead of mailinfo when rebasing
preserves the original authorship.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of the tests in t3508 begins by navigating to a sane state:
git checkout master &&
git reset --hard $commit
If a previous test left unmerged files around, they are untouched and
the checkout fails, causing later tests to fail, too. This is not a
problem in practice because no test except the final one produces
unmerged files.
But as a futureproofing measure, it is still best to avoid the problem
with 'checkout -f'. In particular, this is needed for new tests to be
added to the end of the script.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following python 2.5 features were worked around:
* the sha module is used as a fallback when the hashlib module is
not available
* the 'any' built-in method was replaced with a 'for' loop
* a conditional expression was replaced with an 'if' statement
* the subprocess.check_call method was replaced by a call to
subprocess.Popen followed by a call to subprocess.wait with a
check of its return status
These changes allow the python infrastructure to be used with python 2.4
which is distributed with RedHat's RHEL 5, for example.
t5800 was updated to check for python >= 2.4 to reflect these changes.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/cvsserver:
git-cvsserver: test for pserver authentication support
git-cvsserver: document making a password without htpasswd
git-cvsserver: Improved error handling for pserver
git-cvsserver: indent & clean up authdb code
git-cvsserver: use a password file cvsserver pserver
git-cvsserver: authentication support for pserver
* rs/grep-binary:
grep: support NUL chars in search strings for -F
grep: use REG_STARTEND for all matching if available
grep: continue case insensitive fixed string search after NUL chars
grep: use memmem() for fixed string search
grep: --name-only over binary
grep: --count over binary
grep: grep: refactor handling of binary mode options
grep: add test script for binary file handling
* wp/pretty-enhancement:
pretty: initialize new cmt_fmt_map to 0
pretty: add aliases for pretty formats
pretty: add infrastructure for commit format aliases
pretty: make it easier to add new formats
The environment variable GIT_REFLOG_ACTION was used by git-commit.sh,
but when it was converted to a builtin
(f5bbc3225c, Port git commit to C,
Nov 8 2007) this was lost.
Let's use it again as it is more user friendly when reverting or
cherry-picking to see "revert" or "cherry-pick" in the reflog rather
than to just see "commit".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This attempts to fix a regression in git-commit, where non-abbreviated
SHA-1s were printed in the summary.
One possible fix would be to set ctx.abbrev to DEFAULT_ABBREV in the
`if` block, where format_commit_message() is used.
Instead, we do away with the format_commit_message() codeblock
altogether, replacing it with a re-run of log_tree_commit().
We re-run log_tree_commit() with rev.always_show_header set, to force
the invocation of show_log(). The effect of this flag can be seen from
this excerpt from log-tree.c:560, the only area that
rev.always_show_header is checked:
shown = log_tree_diff(opt, commit, &log);
if (!shown && opt->loginfo && opt->always_show_header) {
log.parent = NULL;
show_log(opt);
shown = 1;
}
We also set rev.use_terminator, so that a newline is appended at the end
of the log message. Note that callers in builtin/log.c that also set
rev.always_show_header don't have to set rev.use_terminator, but still
get a newline, because they are wrapped in a pager.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9c7304e (print the usage string on stdout instead of stderr,
2010-05-17) broke rev-parse --parseopt: when run with -h, the usage
notice on stdout ended up in the shell eval.
Wrap the usage in a cat <<\EOF ... EOF block when printing to stdout.
I do not expect any usage lines to ever start with EOF so this
shouldn't be an undue burden.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose you want to edit all files that contain a specific search term.
Of course, you can do something totally trivial such as
git grep -z -e <term> | xargs -0r vi +/<term>
but maybe you are happy that the same will be achieved by
git grep -Ovi <term>
now.
[jn: rebased and added tests]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds an option to open the matching files in the pager, and if the
pager happens to be "less" (or "vi") and there is only one grep pattern,
it also jumps to the first match right away.
The short option was chose as '-O' to avoid clashes with GNU grep's
options (as suggested by Junio).
So, 'git grep -O abc' is a short form for 'less +/abc $(grep -l abc)'
except that it works also with spaces in file names, and it does not
start the pager if there was no matching file.
[jn: rebased and added tests; with error handling fix from Junio
squashed in]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a --count option that, instead of actually listing the commits,
merely counts them.
This is mostly geared towards script use, and to this end it acts
specially when used with --left-right: it outputs the left and right
counts separately. Previously, scripts would have to run a shell loop
or small inline script over to achieve the same. (Without
--left-right, a simple |wc -l does the job.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've had this option since f423ef5 (tests: allow user to specify
trash directory location, 2009-08-09). Make it easier to look up :-)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise running individual tests from t/ directory may lack the definition
of $DIFF, $GIT_TEST_CMP and friends.
Noticed and initial patch provided by Thomas Rast, alternative solution
suggested by Brandon Casey, which this patch implements.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
In some use cases it is not desirable that the diff family considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree. An example for that are scripts
which just want to check for submodule commits while ignoring any changes
to the work tree. Also users having large submodules known not to change
might want to use this option, as the - sometimes substantial - time it
takes to scan the submodule work tree(s) is saved.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 86140d5 the new test t4041-diff-submodule.sh was introduced although
t4027-diff-submodule.sh already existed. Rename the newer test to
t4041-diff-submodule-option.sh to fix that.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Untracked content in the working tree may prevent rebase -i from checking out
the new base onto which it wants to replay commits, if the new base commit
includes files at those (now untracked) paths. Currently, rebase -i dies
uncleanly in this situation, updating ORIG_HEAD and leaving a useless
.git/rebase-merge directory, with which the user can do nothing useful except
rebase --abort. Make rebase -i abort the procedure itself instead, as
non-interactive rebase already does, and add a test for this behavior.
Signed-off-by: Ian Ward Comfort <icomfort@stanford.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When one side of a merge turns a directory into a submodule, and the other
side does not touch that directory (but has other non-conflicting changes),
then a merge should succeed. But currently, it does not; it rather fails
with a file/directory conflict.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rebase --preserve-merges facility presents a list of commits
in its instruction sheet and uses a separate table to keep
track of their parents. Unfortunately, in practice this means
that with -p after most attempts to rearrange patches, some
commits have the "wrong" parent and the resulting history is
rarely what the caller expected.
Yes, it would be nice to fix that. But first, add a warning to the
manual to help the uninitiated understand what is going on.
Reported-by: Jiří Paleček <jpalecek@web.de>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new configuration variable, "core.eol", that allows the user
to set which line endings to use for end-of-line-normalized files in the
working directory. It defaults to "native", which means CRLF on Windows
and LF everywhere else.
Note that "core.autocrlf" overrides core.eol. This means that
[core]
autocrlf = true
puts CRLFs in the working directory even if core.eol is set to "lf".
Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bug was introduced in 3e97c7c6af
(No diff -b/-w output for all-whitespace changes, Nov 19 2009)
that made the lines:
diff --git a/bar b/sub/bar
similarity index 100%
rename from bar
rename to sub/bar
disappear from "git show -C -C" output when file bar is a binary
file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using --ancestry-path together with history simplification (typically
triggered by path limiting), history simplification would get in the way of
--ancestry-path by prematurely removing the parent links between commits on
which the ancestry path calculations are made.
This patch disables this history simplification when --ancestry-path is
enabled. This is similar to what e.g. --full-history already does.
The patch also includes a simple testcase verifying that --ancestry-path
works together with path limiting.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git ls-files used to error out if given paths which point outside the current
working directory, such as '../'. We now allow such paths and the output is
analogous to git grep -l.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default reflogs are always created for new local branches by
"checkout -b". But by setting core.logAllRefUpdates to false this will
not be true anymore.
In that case you only create the reflogs when you use -l switch with
"checkout -b".
Added missing tests to check expected behaviors.
Signed-off-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Added changes to satisfy a corner case: creating reflogs by using -l
when core.logAllRefUpdates is set to false.
Signed-off-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The UTF-8 prerequisite test checked explicitly for en_US.utf8 in the
output from "locale -a", but the tests that are actually protected by the
prerequisite were asking LC_ALL=en_US.UTF-8 from the system.
This inconsistency leads the tests to fail on platforms that do not know
both en_US.UTF-8 and en_US.utf8 (thanks you, Yann Droneaud, for bringing
this up with an initial patch).
Instead, pick a locale with ".UTF-8" (with or without hyphen, spelled in
either upper or lowercase) in its name from "locale -a" output, and use it
for running the test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that there is an expected failure when running:
git cherry-pick -3 fourth
that's because:
git rev-list --no-walk -3 fourth
produce only one commit and not 3 as "--no-walk" seems to
take over "-3".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
IRIX 6.5 has a default maximum argument list length of 20480. The file
glob that is passed to aggregate-results currently exceeds this length, and
so the script cannot run successfully. Work around this issue by passing
the file names in via the standard input rather than the argument list.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unset builtin of Solaris's xpg4/sh returns non-zero if it is passed a
variable name which was not previously set. Since the unset is not likely
to fail, ignore its return status, but add a semicolon as a clue that the
'&&' was deliberately left off.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Solaris's xpg4/sed and IRIX's sed fail to parse these negated matching
expressions when the '!' is separated from the command that follows.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test script depends on the git-remote-testgit python script. This
python script makes use of the hashlib module which was released in python
version 2.5. So, add a new pre-requisite named PYTHON_2_5_OR_NEWER to
test-lib.sh and check for it in t5800.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When -h is used, print usage messages on stdout. If a command is invoked with
wrong arguments then print the usage messages on stderr.
Signed-off-by: Giuseppe Scrivano <gscrivano@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new subdirectory called 'static' in gitweb/, and move
all static files required by gitweb.cgi when running, which means
styles, images and Javascript code. This should make gitweb more
readable and easier to maintain.
Update t/gitweb-lib.sh to reflect this change.The install-gitweb
now also include moving of static files into 'static' subdirectory
in target directory: update Makefile, gitweb's INSTALL, README and
Makefile accordingly.
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strip out options before checking for a missing upstream argument.
Before:
$ git rebase -m
shift: 426: can't shift that many
After:
$ git rebase -m
Usage: git rebase ...
While at it, fix the usage message to explain that the upstream
argument is mandatory.
Reported-by: Jon Dowland <jmtd@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the metainfo section of git diffs there's an "index" line providing
abbreviated (unless --full-index is used) blob SHA1s from the
pre-/post-images used to generate the diff. These provide hints that
can be used to reconstruct a 3-way merge when applying the patch
(see the --3way option to 'git am' for more details).
In order for this to work, however, the blob SHA1s must not be
abbreviated into ambiguity.
This patch eliminates the possible ambiguity by using find_unique_abbrev()
to produce the abbreviated SHA1s (instead of blind abbreviation by way of
"%.*s").
A testcase verifying the fix is also included.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default the testsuite calls 'diff -u' whenever a file comparison is
called for. Unfortunately that throws a "diff: unknown option '-u'"
error for most non-GNU diffs.
This patch sets GIT_TEST_CMP to 'cmp' on all the architectures where
that happens. The previous version of this patch forgot to export
GIT_TEST_CMP from t/Makefile, which is why 'make test' continued to
fail most tests on most architectures - test-lib.sh was falling back
on its default of `diff -u' for GIT_TEST_CMP. This version of this
patch shows a vast improvement in testsuite results where either GNU
diff is in the path at configure time, or where Makefile knows that
GIT_TEST_CMP=cmp is required.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In tests, call test_cmp rather than raw diff where possible (i.e. if
the output does not go to a pipe), to allow the use of, say, 'cmp'
when the default 'diff -u' is not compatible with a vendor diff.
When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Makefile: reenable install with NO_CURL
completion: --set-upstream option for git-branch
get_cwd_relative(): do not misinterpret suffix as subdirectory
After c197702 (pretty: Respect --abbrev option), non-abbreviated hashes
began to appear, leading to failures for these tests.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
daae1922 (fsck: check ident lines in commit objects, 2010-04-24)
taught fsck to expect commit objects to have the form
tree <object name>
<parents>
author <valid ident string>
committer <valid ident string>
log message
The check is overly strict: for example, it errors out with the
message “expected blank line” for perfectly valid commits with an
"encoding ISO-8859-1" line.
Later it might make sense to teach fsck about the rest of the header
and warn about unrecognized header lines, but for simplicity, let’s
accept arbitrary trailing lines for now.
Reported-by: Tuncer Ayaz <tuncer.ayaz@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the current working directory is the same as the work tree path
plus a suffix, e.g. 'work' and 'work-xyz', then the suffix '-xyz'
would be interpreted as a subdirectory of 'work'.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/SubmittingPatches: clarify GMail section and SMTP
show-branch: use DEFAULT_ABBREV instead of 7
t7502-commit: fix spelling
test get_git_work_tree() return value for NULL
Add a $toplevel variable accessible to `git submodule foreach`, it
contains the absolute path of the top level directory (where
.gitmodules is).
This makes it possible to e.g. read data in .gitmodules from within
foreach commands. I'm using this to configure the branch names I want
to track for each submodule:
git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
For a little history: This patch is borne out of my continuing fight
of trying to have Git track the branches of submodules, not just their
commits.
Obviously that's not how they work (they only track commits), but I'm
just interested in being able to do:
git submodule foreach 'git pull'
Of course that won't work because the submodule is in a disconnected
head, so I first have to connect it, but connect it *to what*.
For a while I was happy with this because as fate had it, it just so
happened to do what I meant:
git submodule foreach 'git checkout $(git describe --all --always) && git pull'
But then that broke down, if there's a tag and a branch the tag will
win out, and I can't git pull a branch:
$ git branch -a
* master
remotes/origin/HEAD -> origin/master
remotes/origin/master
$ git tag -l
release-0.0.6
$ git describe --always --all
release-0.0.6
So I figured that I might as well start tracking the branches I want
in .gitmodules itself:
[submodule "yaml-mode"]
path = yaml-mode
url = git://github.com/yoshiki/yaml-mode.git
branch = master
So now I can just do (as stated above):
git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
Maybe there's a less painful way to do *that* (I'd love to hear about
it). But regardless of that I think it's a good idea to be able to
know what the top-level is from git submodule foreach.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally treat these as equivalent to "/path/to/repo"
and "host:path_to_repo" respectively. However, they are URLs
and as such may be percent-encoded. The current code simply
uses them as-is without any decoding.
With this patch, we will now percent-decode any file:// or
ssh:// url (or ssh+git, git+ssh, etc) at the transport
layer. We continue to treat plain paths and "host:path"
syntax literally.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Search patterns in a file specified with -f can contain NUL characters.
The current code ignores all characters on a line after a NUL.
Pass the actual length of the line all the way from the pattern file to
fixmatch() and use it for case-sensitive fixed string matching.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor REG_STARTEND handling inlook_ahead() into a new helper,
regmatch(), and use it for line matching, too. This allows regex
matching beyond NUL characters if regexec() supports the flag. NUL
characters themselves are not matched in any way, though.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Functions for C strings, like strcasestr(), can't see beyond NUL
characters. Check if there is such an obstacle on the line and try
again behind it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow searching beyond NUL characters by using memmem() instead of
strstr().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the option -c/--count, git grep with the option -l/--name-only
should work the same with binary files as with text files because
there is no danger of messing up the terminal with control characters
from the contents of matching files. GNU grep does the same.
Move the check for ->name_only before the one for binary_match_only,
thus making the latter irrelevant for git grep -l.
Reported-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intent of showing the message "Binary file xyz matches" for
binary files is to avoid annoying users by potentially messing up
their terminals by printing control characters. In --count mode,
this precaution isn't necessary.
Display counts of matches if -c/--count was specified, even if -a
was not given. GNU grep does the same.
Moving the check for ->count before the code for handling binary
file also avoids printing context lines if --count and -[ABC] were
used together, so we can remove the part of the comment that
mentions this behaviour. Again, GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* by/log-follow:
tests: rename duplicate t4205
Make git log --follow find copies among unmodified files.
Make diffcore_std only can run once before a diff_flush
Add a macro DIFF_QUEUE_CLEAR.
* cb/maint-stash-orphaned-file:
stash tests: stash can lose data in a file removed from the index
stash: Don't overwrite files that have gone from the index
* jn/gitweb-caching-prep:
gitweb: Move generating page title to separate subroutine
gitweb: Add custom error handler using die_error
gitweb: Use nonlocal jump instead of 'exit' in die_error
gitweb: href(..., -path_info => 0|1)
Export more test-related variables when running external tests
* jn/request-pull:
tests: chmod +x t5150
adapt request-pull tests for new pull request format
t5150: protect backslash with backslash in shell
request-pull: protect against OPTIONS_KEEPDASHDASH from environment
tests for request-pull
* jn/shortlog:
pretty: Respect --abbrev option
shortlog: Document and test --format option
t4201 (shortlog): Test output format with multiple authors
t4201 (shortlog): guard setup with test_expect_success
Documentation/shortlog: scripted users should not rely on implicit HEAD
* js/maint-receive-pack-symref-alias:
t5516-fetch-push.sh: style cleanup
receive-pack: detect aliased updates which can occur with symrefs
receive-pack: switch global variable 'commands' to a parameter
Conflicts:
t/t5516-fetch-push.sh
* sp/maint-dumb-http-pack-reidx:
http.c::new_http_pack_request: do away with the temp variable filename
http-fetch: Use temporary files for pack-*.idx until verified
http-fetch: Use index-pack rather than verify-pack to check packs
Allow parse_pack_index on temporary files
Extract verify_pack_index for reuse from verify_pack
Introduce close_pack_index to permit replacement
http.c: Remove unnecessary strdup of sha1_to_hex result
http.c: Don't store destination name in request structures
http.c: Drop useless != NULL test in finish_http_pack_request
http.c: Tiny refactoring of finish_http_pack_request
t5550-http-fetch: Use subshell for repository operations
http.c: Remove bad free of static block
* jc/maint-no-reflog-expire-unreach-for-head:
reflog --expire-unreachable: special case entries in "HEAD" reflog
more war on "sleep" in tests
Document gc.<pattern>.reflogexpire variables
Conflicts:
Documentation/config.txt
* sp/maint-describe-tiebreak-with-tagger-date:
describe: Break annotated tag ties by tagger date
tag.c: Parse tagger date (if present)
tag.c: Refactor parse_tag_buffer to be saner to program
tag.h: Remove unused signature field
tag.c: Correct indentation
* sr/remote-helper-export:
t5800: testgit helper requires Python support
Makefile: Simplify handling of python scripts
remote-helpers: add tests for testgit helper
remote-helpers: add testgit helper
remote-helpers: add support for an export command
remote-helpers: allow requesing the path to the .git directory
fast-import: always create marks_file directories
clone: also configure url for bare clones
clone: pass the remote name to remote_get
Conflicts:
Makefile
* ar/config-from-command-line:
Complete prototype of git_config_from_parameters()
Use strbufs instead of open-coded string manipulation
Allow passing of configuration parameters in the command line
* maint:
Fix checkout of large files to network shares on Windows XP
start_command: close cmd->err descriptor when fork/spawn fails
Fix "Out of memory? mmap failed" for files larger than 4GB on Windows
Bigger writes to network drives on Windows XP fail. Cap them at 31MB to
allow them to succeed. Callers need to be prepared for write() calls
that do less work than requested anyway.
On local drives, write() calls are translated to WriteFile() calls with
a cap of 64KB on Windows XP and 256KB on Vista. Thus a cap of 31MB won't
affect the number of WriteFile() calls which do the actual work. There's
still room for some other version of Windows to use a chunk size of 1MB
without increasing the number of system calls.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the problem where the cmd->err passed into start_command wasn't
being properly closed when certain types of errors occurr. (Compare
the affected code with the clean shutdown code later in the function.)
On Windows, this problem would be triggered if mingw_spawnvpe()
failed, which would happen if the command to be executed was malformed
(e.g. a text file that didn't start with a #! line). If cmd->err was
a pipe, the failure to close it could result in a hang while the other
side was waiting (forever) for either input or pipe close, e.g. while
trying to shove the output into the side band. On msysGit, this
problem was causing a hang in t5516-fetch-push.
[J6t: With a slight adjustment of the test case, the hang is also
observed on Linux.]
Signed-off-by: bert Dvornik <dvornik+git@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce -n and -v options for "git notes prune" in complete analogy to
"git prune" so that one can check for dangling notes easily.
The output is a list of names of objects whose notes would be resp.
are removed so that one can check the object ("git show sha1") as well as
the note ("git notes show sha1").
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add ‘git remote set-branches’ for changing the list of tracked refs
for a remote repository with one "porcelain-level" command. This
complements the longstanding ‘git remote add --track’ option.
The interface is based on the ‘git remote set-url’ subcommand.
git remote set-branches base --add C
git remote set-branches base A B D
git remote set-branches base --delete D; # not implemented
Suggested-by: martin f. krafft <madduck@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As discussed on the list, "crlf" is not an optimal name. Linus
suggested "text", which is much better.
Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the semantics of the "crlf" attribute so that it enables
end-of-line normalization when it is set, regardless of "core.autocrlf".
Add a new setting for "crlf": "auto", which enables end-of-line
conversion but does not override the automatic text file detection.
Add a new attribute "eol" with possible values "crlf" and "lf". When
set, this attribute enables normalization and forces git to use CRLF or
LF line endings in the working directory, respectively.
The line ending style to be used for normalized text files in the
working directory is set using "core.autocrlf". When it is set to
"true", CRLFs are used in the working directory; when set to "input" or
"false", LFs are used.
Signed-off-by: Eyvind Bernhardsen <eyvind.bernhardsen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a :short modifier to objectname which outputs the abbreviated
object name.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, autocrlf would only work well for normalized
repositories. Any text files that contained CRLF in the repository
would cause problems, and would be modified when handled with
core.autocrlf set.
Change autocrlf to not do any conversions to files that in the
repository already contain a CR. git with autocrlf set will never
create such a file, or change a LF only file to contain CRs, so the
(new) assumption is that if a file contains a CR, it is intentional,
and autocrlf should not change that.
The following sequence should now always be a NOP even with autocrlf
set (assuming a clean working directory):
git checkout <something>
touch *
git add -A . (will add nothing)
git commit (nothing to commit)
Previously this would break for any text file containing a CR.
Some of you may have been folowing Eyvind's excellent thread about
trying to make end-of-line translation in git a bit smoother.
I decided to attack the problem from a different angle: Is it possible
to make autocrlf behave non-destructively for all the previous problem cases?
Stealing the problem from Eyvind's initial mail (paraphrased and
summarized a bit):
1. Setting autocrlf globally is a pain since autocrlf does not work well
with CRLF in the repo
2. Setting it in individual repos is hard since you do it "too late"
(the clone will get it wrong)
3. If someone checks in a file with CRLF later, you get into problems again
4. If a repository once has contained CRLF, you can't tell autocrlf
at which commit everything is sane again
5. autocrlf does needless work if you know that all your users want
the same EOL style.
I belive that this patch makes autocrlf a safe (and good) default
setting for Windows, and this solves problems 1-4 (it solves 2 by being
set by default, which is early enough for clone).
I implemented it by looking for CR charactes in the index, and
aborting any conversion attempt if this is found.
Signed-off-by: Finn Arne Gangstad <finag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 9c00de5 (ls-remote: fall-back to default remotes when no remote
specified), when no repository is specified, ls-remote may use
the URL/remote in the config "branch.<name>.remote" or the remote
"origin"; it may not be immediately obvious to the user which was used.
In such cases, print a simple "From <URL>" line to indicate which
repository was used. This message is similar to git-fetch's, and is
printed to stderr to avoid breaking existing scripts that depend on
ls-remote's output behaviour.
It can also be disabled with -q/--quiet.
Modify tests related to falling back on default remotes to check for
this as well, and add a test to check for suppression of the message.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user specifies a message, use fmt_merge_msg_shortlog() to
append the shortlog.
Previously, when a message was specified, we ignored the merge title
("Merge <foo> into <bar>") and shortlog from fmt_merge_msg().
Update the documentation for -m to reflect this too.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we know we are creating a bare repository, we use setenv
to set the GIT_DIR directory to the current directory
(either where we already were, or one we created and chdir'd
into with "git init --bare <dir>").
However, with "git --bare init <dir>" (note the --bare as a
git wrapper option), the setup code actually sets GIT_DIR
for us, but it uses the wrong, original cwd when a directory
is given. Because our setenv does not use the overwrite
flag, it is ignored.
We need to set the overwrite flag, but only when we are
given a directory on the command line. That still allows:
GIT_DIR=foo.git git init --bare
to work. The behavior is changed for:
GIT_DIR=foo.git git init --bare bar.git
which used to create the repository in foo.git, but now will
use bar.git. This is more sane, as command line options
should generally override the environment.
Noticed by Oliver Hoffmann.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-check-ref-format(1) describes names which
cannot be used as refnames for git. Some are
legal branchnames in subversion however.
Mangle the not yet handled cases.
Signed-off-by: Torsten Schmutzler <git-ts@theblacksun.eu>
Acked-by: Eric Wong <normalperson@yhbt.net>
* rc/maint-curl-helper:
remote-curl: ensure that URLs have a trailing slash
http: make end_url_with_slash() public
t5541-http-push: add test for URLs with trailing slash
Conflicts:
remote-curl.c
* hg/maint-attr-fix:
attr: Expand macros immediately when encountered.
attr: Allow multiple changes to an attribute on the same line.
attr: Fixed debug output for macro expansion.
* mh/status-optionally-refresh:
t7508: add a test for "git status" in a read-only repository
git status: refresh the index if possible
t7508: add test for "git status" refreshing the index
* cw/ws-indent-with-tab:
whitespace: tests for git-apply --whitespace=fix with tab-in-indent
whitespace: add tab-in-indent support for --whitespace=fix
whitespace: replumb ws_fix_copy to take a strbuf *dst instead of char *dst
whitespace: tests for git-diff --check with tab-in-indent error class
whitespace: add tab-in-indent error class
whitespace: we cannot "catch all errors known to git" anymore
* jk/cached-textconv:
diff: avoid useless filespec population
diff: cache textconv output
textconv: refactor calls to run_textconv
introduce notes-cache interface
make commit_tree a library function
* pc/remove-warn:
Remove a redundant errno test in a usage of remove_path
Introduce remove_or_warn function
Implement the rmdir_or_warn function
Generalise the unlink_or_warn function
stripspace/text-based formatting kicks in when specifying the notes
content with -m or -F, or when an editor is used to edit the notes.
To binary-safely create notes from files, the following construct is
required:
git notes add -C $(git hash-object -w <file>) <object>
Explain this trick (thanks, Johan!) in the manual. Add an ordinary
example, too, to keep this esoteric one company.
Cc: Johan Herland <johan@herland.net>
Cc: Thomas Rast <trast@student.ethz.ch>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the test would print to stdout which interfered with the
TAP output. Now this scaffolding code is just a normal test.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The naming of this test library conflicted with the recommendation in
t/README's "Naming Tests" section.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10eb0007 (request-pull: avoid mentioning that the start point is a
single commit, 2010-01-29), changed the pull request format, so the
test needs some changes to still pass:
- tolerate a missing blank line between “in the git repository at:”
and the name of repository and branch
- recognize subject and date in the new request format
- update the expected request template to match the new format
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At least /bin/sh on FreeBSD 8 interprets backslash followed by newline in an
unquoted here text as "empty".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --follow <path>' don't track copies from unmodified
files, and this patch fix it.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, status gives a lot of hints even when advice.statusHints is
false. Change this so that all hints depend on the config variable.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
edf563f (status: make "how to stage" messages optional, 2009-09-09)
introduced advice.statusHints without tests. Add a few tests to describe
and test the status quo.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 3bf7886 (test-lib: Let tests specify commands to be run at end of
test, 2010-05-02), the git test harness learned to run cleanup
commands unconditionally at the end of a test. During each test,
the intended cleanup actions are collected in the test_cleanup variable
and evaluated. That variable looks something like this:
eval_ret=$?; clean_something && (exit "$eval_ret")
eval_ret=$?; clean_something_else && (exit "$eval_ret")
eval_ret=$?; final_cleanup && (exit "$eval_ret")
eval_ret=$?
All cleanup actions are run unconditionally but if one of them fails
it is properly reported through $eval_ret.
On FreeBSD, unfortunately, $? is set at the beginning of an ‘eval’
to 0 instead of the exit status of the previous command. This results
in tests using test_expect_code appearing to fail and all others
appearing to pass, unless their cleanup fails. Avoid the problem by
setting eval_ret before the ‘eval’ begins.
Thanks to Jeff King for the explanation.
Cc: Jeff King <peff@peff.net>
Cc: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prior to this, the output of git log -1 --format=%h was always 7
characters long, without regard to whether --abbrev had been passed.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not document the --pretty synonym, since it takes too long to
explain the name to people.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow the current prevailing style. This also has the benefit of
capturing any stray output and noticing if any of the setup commands
start failing.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Though I have not seen this in the wild, it has been said that there
are likely to be git repositories converted from other version control
systems with an invalid ident line like this one:
author <user@example.com> 18746342 +0000
Because there is no space between the (empty) user name and the email
address, commit --amend chokes. When searching for a
space-left-bracket sequence on the ident line, it finds it in the
committer line, ending up utterly confused.
Better for commit --amend to treat this like a valid ident line with
empty username and complain.
The tests remove the questionable commit objects after use so there is
no chance for them to confuse later tests.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain actions can imply that if the test fails early, recovery from
within other tests is too much to expect:
- creating unwritable directories, like the EACCESS test in t0001-init
- setting unusual configuration, like user.signingkey in t7004-tag
- crashing and leaving the index lock held, like t3600-rm once did
Some test scripts work around this by running cleanup actions outside
the supervision of the test harness, with the unfortunate consequence
that those commands are not appropriately echoed and their output not
suppressed. Others explicitly save exit status, clean up, and then
reset the exit status within the tests, which has excellent behavior
but makes the tests hard to read. Still others ignore the problem.
Allow tests a fourth option: by calling this function, tests can
stack up commands they would like to be run to clean up.
Commands passed to test_when_finished during a test are
unconditionally run in the test environment immediately before the
test is completed, in last-in-first-out order. If some cleanup
command fails, then the other cleanup commands are still run before
the failure is reported and the test script allowed to continue.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, a local git clone reports only initializing an empty
git dir, which is potentially confusing.
Instead, report that cloning is in progress and when it is done
(unless -q) is given, and suppress the init report.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dear Junio,
this is a resend of relicensing patch for test suite library, which
was initially sent by Carl Worth. Since the time you sent me acks for
this patch collected by you, I collected 8 additional acks as is
documented at
https://git.wiki.kernel.org/index.php/Test-lib_reclicensing. There are
still three contributors missing: Bert Wesarg, Stephan Beyer and Bryan
Donlan. The contributions of first two are clearly not copyrightable.
I'm not sure about the copyrightability of Bryan Donlan's
contributions (git log -p --author='Bryan Donlan' t/test-lib.sh).
Carl told me that in your ack collection process you missed only three
acks. So I wonder whether you already did some analysis of which
contributions are copyrightable. If so, are the missing acks in the
list bellow?
Thanks
Michal
8<--------8<--------8<--------
This file has had no explicit license information noted in it, but
has clearly been created and modified according to the terms of GPLv2
as with the rest of the git code base.
The purpose of relicensing is to allow other GPLv3+ projects (in
particular, the notmuch project: http://notmuchmail.org) to use this
same test-suite structure and to contribute changes back as well.
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Acked-by: Brandon Casey <drafnel@gmail.com>
Acked-by: Clemens Buchacher <drizzd@aon.at>
Acked-by: David Reiss <dreiss@facebook.com>
Acked-by: Emil Sit <sit@emilsit.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Fredrik Kuivinen <frekui@gmail.com>
Acked-by: Gerrit Pape <pape@smarden.org>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Johan Herland <johan@herland.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Lea Wiemann <lewiemann@gmail.com>
Acked-by: Markus Heidelberg <markus.heidelberg@web.de>
Acked-by: Martin Waitz <tali@admingilde.org>
Acked-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Acked-by: Matthias Lederhofer <matled@gmx.net>
Acked-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Michele Ballabio <barra_cuda@katamail.com>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Acked-by: Pavel Roskin <proski@gnu.org>
Acked-by: Petr Baudis <pasky@ucw.cz>
Acked-by: Pierre Habouzit <madcoder@debian.org>
Acked-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
previously the only ways to alias a --pretty format within git were
either to set the format as your default format (via the format.pretty
configuration variable), or by using a regular git alias. This left the
definition of more complicated formats to the realm of "builtin or
nothing", with user-defined formats usually being reserved for quick
one-offs.
Here we allow user-defined formats to enjoy more or less the same
benefits of builtins. By defining pretty.myalias, "myalias" can be
used in place of whatever would normally come after --pretty=. This
can be a format:, tformat:, raw (ie, defaulting to tformat), or the name
of another builtin or user-defined pretty format.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This refactoring (adding guess_file_syntax and run_highlighter
subroutines) is meant to make it easier in the future to add support
for other syntax highlighing solutions, or make it smarter by not
re-running `git cat-file` second time.
Instead of looping over list of regexps (keys of %highlight_type hash),
make use of the fact that choosing syntax is based either on full
basename (%highlight_basename), or on file extension (%highlight_ext).
Add some basic test of syntax highlighting (with 'highlight' as
prerequisite) to t/t9500-gitweb-standalone-no-errors.sh test.
While at it make git_blob Perl style prettier.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that email addresses do not contain <, >, or newline so they can
be quickly scanned without trouble. The copy() function in ident.c
already ensures that ordinary git commands will not write email
addresses without this property.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add exporting TEST_DIRECTORY and TRASH_DIRECTORY to test_external, for
external tests to be able to find test script (and git sources), and
to find trash directory (usually with test repository in it).
Add also exporting GIT_TEST_LONG, so that external test can skip
time-intensive tests unless test is invoked with `--long' option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Acked-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A merge will fail gracefully if it needs to update files marked
"assume unchanged", but other similar commands will not. In
particular, checkout and rebase will silently overwrite changes to
such files.
This is a regression introduced in commit 1dcafcc0 (verify_uptodate():
add ce_uptodate(ce) test), which avoids lstat's during a merge, if the
index entry is up-to-date. If the CE_VALID flag is set, however, we
cannot trust CE_UPTODATE.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like most git commands, request-pull supports a -- delimiter to allow
callers to pass arguments that would otherwise be treated as an option
afterwards. The internal OPTIONS_KEEPDASHDASH variable is passed
empty to git-sh-setup to indicate that request-pull itself does not
care about the position of the -- delimiter. But if the user has
that variable in her environment, request-pull will see the “--” and
fail.
Empty it explicitly to guard against this. While at it, make the
corresponding fix to git-resurrect, too (all other scripts in git.git
already protect themselves).
Acked-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that request-pull handles failure to push cleanly, writes
pull requests that produce the correct effect when followed, and
uses a predictable format.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"rev-list A..H" computes the set of commits that are ancestors of H, but
excludes the ones that are ancestors of A. This is useful to see what
happened to the history leading to H since A, in the sense that "what does
H have that did not exist in A" (e.g. when you have a choice to update to
H from A).
x---x---A---B---C <-- topic
/ \
x---x---x---o---o---o---o---M---D---E---F---G <-- dev
/ \
x---o---o---o---o---o---o---o---o---o---o---o---N---H <-- master
The result in the above example would be the commits marked with caps
letters (except for A itself, of course), and the ones marked with 'o'.
When you want to find out what commits in H are contaminated with the bug
introduced by A and need fixing, however, you might want to view only the
subset of "A..B" that are actually descendants of A, i.e. excluding the
ones marked with 'o'. Introduce a new option --ancestry-path to compute
this set with "rev-list --ancestry-path A..B".
Note that in practice, you would build a fix immediately on top of A and
"git branch --contains A" will give the names of branches that you would
need to merge the fix into (i.e. topic, dev and master), so this may not
be worth paying the extra cost of postprocessing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file is removed from the index and then modified in the working
tree then stash will discard the working tree file with no way to
recover the changes.
This can might be done in one of a number of ways.
git rm file
vi file # edit a new version
git stash
or with git mv
git mv file newfile
vi file # make a new file with the old name
git stash
Signed-off-by: Charles Bailey <charles@hashpling.org>
Cleanup t5516-fetch-push.sh to use prevailing test script style
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing to a remote repo the sending side filters out aliased
updates (e.g., foo:baz bar:baz). However, it is not possible for the
sender to know if two refs are aliased on the receiving side via
symrefs. Here is one such scenario:
$ git init origin
$ (cd origin && touch file && git add file && git commit -a -m intial)
$ git clone --bare origin origin.git
$ rm -rf origin
$ git clone origin.git client
$ git clone --mirror client backup.git &&
$ (cd backup.git && git remote set-head origin --auto)
$ (cd client &&
git remote add --mirror backup ../backup.git &&
echo change1 > file && git commit -a -m change1 &&
git push origin &&
git push backup
)
The push to backup fails with:
Counting objects: 5, done.
Writing objects: 100% (3/3), 244 bytes, done.
Total 3 (delta 0), reused 0 (delta 0)
Unpacking objects: 100% (3/3), done.
error: Ref refs/remotes/origin/master is at ef3... but expected 262...
remote: error: failed to lock refs/remotes/origin/master
To ../backup.git
262cd57..ef307ff master -> master
262cd57..ef307ff origin/HEAD -> origin/HEAD
! [remote rejected] origin/master -> origin/master (failed to lock)
error: failed to push some refs to '../backup.git'
The reason is that refs/remotes/origin/HEAD is a symref to
refs/remotes/origin/master, but it is not possible for the sending side
to unambiguously know this.
This commit fixes the issue by having receive-pack ignore any update to
a symref whose target is being identically updated. If a symref and its
target are being updated inconsistently, then the update for both fails
with an error message ("refusing inconsistent update...") to help
diagnose the situation.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As long as no rev-list arguments are supplied on the command line,
git bundle create --stdin currently segfaults. With added rev-list
arguments, it does not segfault, but the revisions from stdin are
ignored.
Thanks to Joey Hess <joey@kitenet.net> for the report.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there are 6 tests which are not even written but are
'test_expect_failure message false'.
Do not abuse test_expect_failure as a to do marker, but mark them as
'#TODO' instead.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Nguyen Thai Ngoc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Verify that a downloaded pack-*.idx file is consistent and valid
as an index file before we rename it into its final destination.
This prevents a corrupt index file from later being treated as a
usable file, confusing readers.
Check that we do not have the pack index file before invoking
fetch_pack_index(); that way, we can do without the has_pack_index()
check in fetch_pack_index().
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To ensure we don't leave a corrupt pack file positioned as though
it were a valid pack file, run index-pack on the temporary pack
before we rename it to its final name. If index-pack crashes out
when it discovers file corruption (e.g. GitHub's error HTML at the
end of the file), simply delete the temporary files to cleanup.
By waiting until the pack has been validated before we move it
to its final name, we eliminate a race condition where another
concurrent reader might try to access the pack at the same time
that we are still trying to verify its not corrupt.
Switching from verify-pack to index-pack is a change in behavior,
but it should turn out better for users. The index-pack algorithm
tries to minimize disk seeks, as well as the number of times any
given object is inflated, by organizing its work along delta chains.
The verify-pack logic does not attempt to do this, thrashing the
delta base cache and the filesystem cache.
By recreating the index file locally, we also can automatically
upgrade from a v1 pack table of contents to v2. This makes the
CRC32 data available for use during later repacks, even if the
server didn't have them on hand.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add '--[no-]tags' options to 'git remote add' which add the
'remote.REMOTE.tagopt = --[no-]tags' to the configuration file.
This mimics the "--tags" and "--no-tags" options of "git fetch".
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I have an alias that takes two arguments and compares their patch IDs.
I would like to use to make sure I've tested exactly what I submit
(patch by patch), like
git patch-cmp origin/master.. file-being-sent
However, I cannot do that because git patch-id is fooled by the "-- "
trailer that git format-patch puts, or likely by the MIME boundary.
This patch adds hunk parsing logic to git patch-id in order to detect an
out of place "-" line and split the patch when it comes. In addition,
commit ids in the "From " lines are considered and printed in the output.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two more tests that sleep only to waste tick can be converted to use
test_tick and take expiry parameters relative to $test_tick. The basic
idea is to replace "sleep 1" with "test_tick" to cause the "time" to pass.
These tests are interested in expiring things with "now" as the timestamp,
soo use a timestamp relative to $test_tick to give them more stability and
reproducibility.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change into the server repository's directory using a subshell,
so we can return back to the top of the trash directory before
doing anything more in the test script.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t1010-mktree: Adjust expected result to code and documentation
combined diff: correctly handle truncated file
Document new "already-merged" rule for branch -d
The last two tests here were always supposed to fail in the sense
that, according to code and documentation, mktree should read non-recursive
ls-tree output, but not recursive one, and therefore explicitely refuses
to deal with slashes.
Adjust the test (must_fail) so that it succeeds when mktree dies on
slashes.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider an evil merge of two commits A and B, both of which have a
file 'foo', but the merge result does not have that file.
The combined-diff code learned in 4462731 (combine-diff: do not punt
on removed or added files., 2006-02-06) to concisely show only the
removal, since that is the evil part and the previous contents are
presumably uninteresting.
However, to diagnose an empty merge result, it overloaded the variable
that holds the file's length. This means that the check also triggers
for truncated files. Consequently, such files were not shown in the
diff at all despite the merge being clearly evil.
Fix this by adding a new variable that distinguishes whether the file
was deleted (which is the case 4462731 handled) or truncated. In the
truncated case, we show the full combined diff again, which is rather
spammy but at least does not hide the evilness.
Reported-by: David Martínez Martí <desarrollo@gestiweb.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of these tests are removing files, environment variables, and
configuration that might interfere outside the test. Putting these
clean-up commands in the test (in the same spirit as v1.7.1-rc0~59,
2010-03-20) means that errors during setup will be caught quickly and
non-error text will be suppressed without -v.
While at it, apply some other minor fixes:
- do not rely on the shell to export variables defined with the same
command as a function call
- avoid whitespace immediately after the > redirection operator, for
consistency with the style of other tests
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the --color-words engine a more general interface that
supports two new modes:
* --word-diff=plain, inspired by the 'wdiff' utility (most similar to
'wdiff -n <old> <new>'): uses delimiters [-removed-] and {+added+}
* --word-diff=porcelain, which generates an ad-hoc machine readable
format:
- each diff unit is prefixed by [-+ ] and terminated by newline as
in unified diff
- newlines in the input are output as a line consisting only of a
tilde '~'
Both of these formats still support color if it is enabled, using it
to highlight the differences. --color-words becomes a synonym for
--word-diff=color, which is the color-only format. Also adds some
compatibility/convenience options.
Thanks to Junio C Hamano and Miles Bader for good ideas.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If more than one annotated tag points at the same commit, use the
tag whose tagger field has a more recent date stamp. This resolves
non-deterministic cases where the maintainer has done:
$ git tag -a -m "2.1-rc1" v2.1-rc1 deadbeef
$ git tag -a -m "2.1" v2.1 deadbeef
If the tag is an older-style annotated tag with no tagger date, we
assume a date stamp at the UNIX epoch. This will cause us to prefer
an annotated tag that has a valid date.
We could also try to consider the tag object chain, favoring a tag
that "includes" another one:
$ git tag -a -m "2.1-rc0" v2.1-rc1 deadbeef
$ git tag -a -m "2.1" v2.1 v2.1-rc1
However traversing the tag's object chain looking for inclusion
is much more complicated. Its already very likely that even in
these cases the v2.1 tag will have a more recent tagger date than
v2.1-rc1, so with this change describe should still resolve this
by selecting the more recent v2.1.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git remote-testgit is written in Python. In a NO_PYTHON build, tests
using it would fail, so skip them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there are foreign $Id$ keywords in the repository, they are most
likely there for a reason. Let's keep them on checkout (which is also
what the documentation indicates). Foreign $Id$ keywords are now
recognized by there being multiple space separated fields in $Id:xxxxx$.
Signed-off-by: Henrik Grubbström <grubba@grubba.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to contract $Id:xxxxx$ strings could eat an arbitrary amount
of source text if the terminating $ was lost. It now refuses to
contract $Id:xxxxx$ strings spanning multiple lines.
Signed-off-by: Henrik Grubbström <grubba@grubba.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, add a missing && to the update --init test.
The goal is to make it clearer what happened when one of these
tests fails. The update --init test is currently (consistently)
failing on a few unusual machines.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new reader may not realize what properties the $submodurl
repository needs to have.
One of the tests is checking that ‘submodule add -b foo’ creates
a ‘foo’ branch. Put this test in context by checking that
without -b, no ‘foo’ branch is created.
While at it, make sure each added submodule is a reasonable
repository, with clean index, no stray files, and so on.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The setup in t7400-submodule-basic does a number of different
things to support different tests. Splitting it up makes the
test a little easier to read and should provide an opportunity
to move each piece of setup closer to the tests that require it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using macros it is otherwise hard to know whether an
attribute set by the macro should override an already set
attribute. Consider the following .gitattributes file:
[attr]mybinary binary -ident
* ident
foo.bin mybinary
bar.bin mybinary ident
Without this patch both foo.bin and bar.bin will have
the ident attribute set, which is probably not what
the user expects. With this patch foo.bin will have an
unset ident attribute, while bar.bin will have it set.
Signed-off-by: Henrik Grubbström <grubba@grubba.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using macros it isn't inconceivable to have an attribute
being set by a macro, and then being reset explicitly.
Signed-off-by: Henrik Grubbström <grubba@grubba.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The simple test for an existing .git directory gives an incorrect result
if .git is a file that records "gitdir: overthere". So for submodules that
use a .git file, "git status" and the diff family - when the "--submodule"
option is given - did assume the submodule was not populated at all when
a .git file was used, thus generating wrong output or no output at all.
This is fixed by using read_gitfile_gently() to get the correct location
of the .git directory. While at it, is_submodule_modified() was cleaned up
to use the "dir" member of "struct child_process" instead of setting the
GIT_WORK_TREE and GIT_DIR environment variables.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, we blindly assumed that URLs passed to the remote-curl
helper did not end with a trailing slash.
Use the convenience function end_url_with_slash() from http.[ch] to
ensure that URLs have a trailing slash on invocation of the remote-curl
helper, and use the URL as one with a trailing slash throughout.
It is possible for users to pass a URL with a trailing slash to
remote-curl, by, say, setting it in remote.<name>.url in their git
config. The resulting requests have an empty path component (//) and may
break implementations of the http git protocol.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike notes that are often multi-line and disrupting to be placed in many
output formats, a decoration is designed to be a small token that can be
tacked after an existing line of the output where a commit object name sits.
Disabling log.decorate for something like "log --oneline" would defeat the
purpose of the configuration.
We _might_ want to change it further in the future to force scripts that
do not want to be broken by random end user configurations to explicitly
say "log --no-decorate", but that would be an incompatible change that
needs the usual multi-release-cycle deprecation process.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of breaking execution when no remote (as specified in the
variable dest) is specified when git-ls-remote is invoked, continue on
and let remote_get() handle it.
This way, we are able to use the default remotes (eg. "origin",
branch.<name>.remote), as git-fetch, git-push, and other users of
remote_get(), do.
If no suitable remote is found, exit with a message describing the
issue, instead of just the usage text, as we do previously.
Add several tests to check that git-ls-remote handles the
no-remote-specified situation.
Also add a test that "git ls-remote <pattern>" does not work; we are
unable to guess the remote in that situation, as are git-fetch and
git-push.
In that test, we are testing for messages coming from two separate
processes, but we should be OK, because the second message is triggered
by closing the fd which must happen after the first message is printed.
(analysis by Jeff King.)
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 51667147be, "git apply --whitespace=fix" was extended to
allow a blank context line to match beyond the end of the file,
but only if the context line was in the leading part of the
hunk (i.e. the hunk inserted additional contents at the end
of the file).
Drop the restriction that the context line must be in the
leading part of the hunk, thus allowing a file to be changed
from:
a
(blank line)
to:
b
a
(blank line)
Note that the blank line will be kept, because "--whitespace=fix"
only removes trailing blank lines that a hunk would add, never
trailing blank lines in the context.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change git-commit(1) to accept the --allow-empty-message option
to allow a commit with an empty message. This is analogous to the
existing --allow-empty option which allows a commit that records
no changes. As these are mainly for interoperating with foreign SCM
systems, and are not meant for normal use, ensure that "git commit -h"
does not talk about them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many places in test suite we have "sleep"s that do not have to be
there.
- I do not simply see the point of the one in t3500. It may be making
sure that the timestamp order of commits generated during the test is
stable, in which case test_tick is the right ingredient to use without
wasting tester's time.
- The one in t4011 is to make sure that the plumbing diff-index notices
the stat-dirtyness of a removed then identically recreated symlink.
Keeping the old symlink around to make sure that a newly created
symlink gets different ino would be sufficient for that purpose.
- The one in t7600 is to make sure that "git merge" does not get confused
by stat-dirty "file" in the working tree. Again, keeping the old file
around and creating an identical copy to ensure a different ino would
be sufficient for that purpose.
The "racy git" tests in t0010 are inherently about mtime between the index
itself and index entries. The "sleep" in that test must stay as they are.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/fmt-merge-msg:
fmt-merge-msg: hide summary option
fmt-merge-msg: remove custom string_list implementation
string-list: add unsorted_string_list_lookup()
fmt-merge-msg: use pretty.c routines
t6200: test fmt-merge-msg more
t6200: modernize with test_tick
fmt-merge-msg: be quiet if nothing to merge
Many scripts, most notably gitk, rely on output from the log family of
command not to be molested by random user configuration. This is
especially true when --pretty=raw is given.
Just like we disable notes output unless the command line explicitly
asks for --show-notes, disable the decoration code unless --decorate is
given explicitly from the command line and --pretty or --oneline is
given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/merge-diff3-label:
merge-recursive: add a label for ancestor
cherry-pick, revert: add a label for ancestor
revert: clarify label on conflict hunks
compat: add mempcpy()
checkout -m --conflict=diff3: add a label for ancestor
merge_trees(): add ancestor label parameter for diff3-style output
merge_file(): add comment explaining behavior wrt conflict style
checkout --conflict=diff3: add a label for ancestor
ll_merge(): add ancestor label parameter for diff3-style output
merge-file --diff3: add a label for ancestor
xdl_merge(): move file1 and file2 labels to xmparam structure
xdl_merge(): add optional ancestor label to diff3-style output
tests: document cherry-pick behavior in face of conflicts
tests: document format of conflicts from checkout -m
Conflicts:
builtin/revert.c
* bc/acl-test:
t/t1304: make a second colon optional in the mask ACL check
t/t1304: set the ACL effective rights mask
t/t1304: use 'test -r' to test readability rather than looking at mode bits
t/t1304: set the Default ACL base entries
t/t1304: avoid -d option to setfacl
This was already the case before commit 9e4b7ab6 (git status: not
"commit --dry-run" anymore, 2009-08-15) with the difference that it died
at failure.
It got lost during the new implementation of "git status", which was
meant to only change behaviour when invoked with arguments.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running a textconv filter can take a long time. It's
particularly bad for a large file which needs to be spooled
to disk, but even for small files, the fork+exec overhead
can add up for something like "git log -p".
This patch uses the notes-cache mechanism to keep a fast
cache of textconv output. Caches are stored in
refs/notes/textconv/$x, where $x is the userdiff driver
defined in gitattributes.
Caching is enabled only if diff.$x.cachetextconv is true.
In my test repo, on a commit with 45 jpg and avi files
changed and a textconv to show their exif tags:
[before]
$ time git show >/dev/null
real 0m13.724s
user 0m12.057s
sys 0m1.624s
[after, first run]
$ git config diff.mfo.cachetextconv true
$ time git show >/dev/null
real 0m14.252s
user 0m12.197s
sys 0m1.800s
[after, subsequent runs]
$ time git show >/dev/null
real 0m0.352s
user 0m0.148s
sys 0m0.200s
So for a slight (3.8%) cost on the first run, we achieve an
almost 40x speed up on subsequent runs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't output an error on `git format-patch --ignore-if-in-upstream HEAD`.
This matches the behavior of `git format-patch HEAD`.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The notes code intends to write reflog entries, but currently they are
not written because log_ref_write() checks for the refname path
explicitly.
Add refs/notes to the list of allowed paths so that notes references are
treated just like branch heads, i.e. according to core.logAllRefUpdates
and core.bare.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test whether the notes code writes reflog entries. It intends to
(setting up the reflog messages) but currently does not.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/cherry-pick-ff:
revert: fix tiny memory leak in cherry-pick --ff
rebase -i: use new --ff cherry-pick option
Documentation: describe new cherry-pick --ff option
cherry-pick: add tests for new --ff option
revert: add --ff option to allow fast forward when cherry-picking
builtin/merge: make checkout_fast_forward() non static
parse-options: add parse_options_concat() to concat options
The post-rewrite support, in the form of the call to
'record_in_rewritten', was hidden in the arm where we have to record a
new commit for the user. This meant that it was never invoked in the
case where the user has already amended the commit by herself.
[The test is designed to exercise both arms of the 'if' in question.]
Furthermore, recording the stopped-sha (the SHA1 of the commit before
the editing) suffered from a cut&paste error from die_with_patch and
used the wrong variable, hence it never recorded anything.
Noticed by Junio.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t9350: fix careless use of "cd"
difftool: Fix '--gui' when diff.guitool is unconfigured
fast-export: don't segfault when marks file cannot be opened
Upon failure of any of these tests (or when a test that is marked as
expecting a failure is fixed), we will end up running later tests in
random places.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces the remove_or_warn function which is a
generalised version of the {unlink,rmdir}_or_warn functions. It takes
an additional parameter indicating the mode of the file to be removed.
The patch also modifies certain functions to use remove_or_warn
where appropriate, and adds a test case for a bug fixed by the use
of remove_or_warn.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The values passed this way will override whatever is defined
in the config files.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diff.guitool is unconfigured and "--gui" is specified
git-difftool dies with the following error message:
config diff.guitool: command returned error: 1
Catch the error so that the "--gui" flag is a no-op when
diff.guitool is unconfigured.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some more tests so we don't break behavior upon modernizing
fmt-merge-msg.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test defines its own version of test_tick. Get rid of it.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When FETCH_HEAD contains only 'not-for-merge' entries fmt-merge-msg
still outputs "Merge" (and if the branch isn't master " into <branch>").
In this case fmt-merge-msg is outputting junk and should really just
be quiet. Fix it.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
* jl/submodule-diff-dirtiness:
git status: ignoring untracked files must apply to submodules too
git status: Fix false positive "new commits" output for dirty submodules
Refactor dirty submodule detection in diff-lib.c
git status: Show detailed dirty status of submodules in long format
git diff --submodule: Show detailed dirty status of submodules
* pb/log-first-parent-p-m:
show --first-parent/-m: do not default to --cc
show -c: show patch text
revision: introduce setup_revision_opt
t4013: add tests for log -p -m --first-parent
git log -p -m: document -m and honor --first-parent
* jk/maint-add-ignored-dir:
tests for "git add ignored-dir/file" without -f
dir: fix COLLECT_IGNORED on excluded prefixes
t0050: mark non-working test as such
* bg/apply-fix-blank-at-eof:
t3417: Add test cases for "rebase --whitespace=fix"
t4124: Add additional tests of --whitespace=fix
apply: Allow blank context lines to match beyond EOF
apply: Remove the quick rejection test
apply: Don't unnecessarily update line lengths in the preimage
For git-rebase.sh, --no-ff is a synonym for --force-rebase.
For git-rebase--interactive.sh, --no-ff cherry-picks all the commits in
the rebased branch, instead of fast-forwarding over any unchanged commits.
--no-ff offers an alternative way to deal with reverted merges. Instead of
"reverting the revert" you can use "rebase --no-ff" to recreate the branch
with entirely new commits (they're new because at the very least the
committer time is different). This obviates the need to revert the
reversion, as you can re-merge the new topic branch directly. Added an
addendum to revert-a-faulty-merge.txt describing the situation and how to
use --no-ff to handle it.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to -b, --orphan creates a new branch, but it starts without any
commit. After running "git checkout --orphan newbranch", you are on a
new branch "newbranch", and the first commit you create from this state
will start a new history without any ancestry.
"git checkout --orphan" keeps the index and the working tree files
intact in order to make it convenient for creating a new history whose
trees resemble the ones from the original branch.
When creating a branch whose trees have no resemblance to the ones from
the original branch, it may be easier to start work on the new branch by
untracking and removing all working tree files that came from the
original branch, by running a 'git rm -rf .' immediately after running
"checkout --orphan".
Signed-off-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
55246aa (Dont use "<unknown>" for placeholders and suppress printing
of empty user formats) introduced a check to prevent empty
user-formats from being printed. This test didn't take empty commit
messages into account, and prevented the line-termination from being
output. This lead to multiple commits on a single line.
Correct it by guarding the check with a check for user-format. A
similar correction for the --graph code-path has been included.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When writing conflict hunks in ‘diff3 -m’ format, also add a label to
the common ancestor. Especially in a cherry-pick, it is not immediately
obvious without such a label what the common ancestor represents.
git rerere does not have trouble parsing the new output and its preimage
ids are unchanged since it includes its own code for recreating conflict
hunks. No other code in git parses conflict hunks.
Requested-by: Stefan Monnier <monnier@iro.umontreal.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reverting a commit, the commit being merged is not the commit
to revert itself but its parent. Add “parent of” to the conflict
hunk label to make this more clear.
The conflict hunk labels are all pieces of a single string written in
the new get_message() function. Avoid some complication by using
mempcpy to advance a pointer as the result is written.
Also free the corresponding temporary buffer (it was leaked before).
This is not important because it is a small one-time allocation. It
would become a memory leak if unnoticed when libifying revert.
This patch uses calls to strlen() instead of integer constants in some
places. GCC will compute the length at compile time; I am not sure
about other compilers, but this is not performance-critical anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git checkout --merge --conflict=diff3 can be used to present conflict
hunks including text from the common ancestor. The added information
is helpful for resolving a merge by hand, and merge tools tend to
understand it because it is very similar to what ‘diff3 -m’ produces.
Unlike current git, diff3 -m includes a label for the merge base on
the ||||||| line, and unfortunately, some tools cannot parse the
conflict hunks without it. Humans can benefit from a cue when
learning to interpreting the format, too. Mark the start of the text
from the old branch with a label based on the branch’s name.
git rerere does not have trouble parsing this output and its preimage
ids are unchanged since it includes its own code for recreating
conflict hunks. No other code in git tries to parse conflict hunks.
Requested-by: Stefan Monnier <monnier@iro.umontreal.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git checkout --conflict=diff3 can be used to present conflicts hunks
including text from the common ancestor:
<<<<<<< ours
ourside
|||||||
original
=======
theirside
>>>>>>> theirs
The added information is helpful for resolving a merge by hand, and
merge tools can usually understand it without trouble because it looks
like output from ‘diff3 -m’.
diff3 includes a label for the merge base on the ||||||| line, and it
seems some tools (for example, Emacs 22’s smerge-mode) cannot parse
conflict hunks without such a label. Humans could use help in
interpreting the output, too. So change the marker for the start of the
text from the common ancestor to include the label “base”.
git rerere’s conflict identifiers are not affected: to parse conflict
hunks, rerere looks for whitespace after the ||||||| marker rather
than a newline, and to compute preimage ids, rerere has its own code
for creating conflict hunks. No other code in git tries to parse
conflict hunks.
Requested-by: Stefan Monnier <monnier@iro.umontreal.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git merge-file --diff3 can be used to present conflicts hunks
including text from the common ancestor.
The added information is helpful for resolving a merge by hand, and
merge tools can usually grok it because it looks like output from
diff3 -m. However, ‘diff3’ includes a label for the merge base on the
||||||| line and some tools cannot parse conflict hunks without such a
label. Write the base-name as passed in a -L option (or the name of
the ancestor file by default) on that line.
git rerere will not have trouble parsing this output, since instead of
looking for a newline, it looks for whitespace after the |||||||
marker. Since rerere includes its own code for recreating conflict
hunks, conflict identifiers are unaffected. No other code in git tries
to parse conflict hunks.
Requested-by: Stefan Monnier <monnier@iro.umontreal.ca>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to change the format of the conflict hunks that
cherry-pick and revert write. Add tests checking the current behavior
first.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to change the format of the conflict hunks that ‘checkout
--merge’ writes. Add tests checking the current behavior first.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-add-ignored-dir:
tests for "git add ignored-dir/file" without -f
dir: fix COLLECT_IGNORED on excluded prefixes
t0050: mark non-working test as such
* cc/reset-keep:
Documentation: improve description of "git reset --keep"
reset: disallow using --keep when there are unmerged entries
reset: disallow "reset --keep" outside a work tree
Documentation: reset: describe new "--keep" option
reset: add test cases for "--keep" option
reset: add option "--keep" to "git reset"
* bg/apply-fix-blank-at-eof:
t3417: Add test cases for "rebase --whitespace=fix"
t4124: Add additional tests of --whitespace=fix
apply: Allow blank context lines to match beyond EOF
apply: Remove the quick rejection test
apply: Don't unnecessarily update line lengths in the preimage
* bw/union-merge-refactor:
merge-file: add option to select union merge favor
merge-file: add option to specify the marker size
refactor merge flags into xmparam_t
make union merge an xdl merge favor
Several tests did not use test_expect_success for their setup
commands. Putting these start commands into the testing framework
means both that errors during setup will be caught quickly and that
non-error text will be suppressed without -v.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test is supposed to check that git-remote correctly refuses to delete
all URLS for the specified remote which match the '.*' regular expression.
Since the '*' was not protected, it was interpreted by the shell as a file
glob and expanded before being passed to git-remote. The call to
git-remote still exited non-zero in this case, and the overall test still
passed, but it exited non-zero because git-remote was passed the incorrect
number of arguments, not for the reason it was supposed to fail.
Correct the test by escaping the '*'.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Solaris only uses one colon in the listing of the ACL mask, Linux uses two,
so substitute egrep for grep and make the second colon optional.
The -q option for Solaris 7's /usr/xpg4/bin/egrep does not appear to be
implemented, so redirect output to /dev/null.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some implementations of setfacl do not recalculate the effective rights
mask when the ACL is modified. So, set the effective rights mask
explicitly to ensure that the ACL's that are set on the directories will
have effect.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test was using the group read permission bit as an indicator of the
default ACL mask. This behavior is valid on Linux but not on other
platforms like Solaris. So, rather than looking at mode bits, just test
readability for the user. This, along with the checks for the existence
of the ACL's that were set on the parent directories, should be enough.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the Linux setfacl man page, in order for an ACL to be valid,
the following rules must be satisfied:
* Whenever an ACL contains any Default ACL entries, the three Default
ACL base entries (default owner, default group, and default others)
must also exist.
* Whenever a Default ACL contains named user entries or named group
objects, it must also contain a default effective rights mask.
Some implementations of setfacl (Linux) do this automatically when
necessary, some (Solaris) do not. Solaris's setfacl croaks when trying to
create a default user ACL if the above rules are not satisfied. So, create
them before modifying the default user ACL's.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms (Solaris) have a setfacl whose -d switch works differently
than the one on Linux. On Linux, it causes all operations to be applied
to the Default ACL. There is a notation for operating on the Default ACL:
[d[efault]:] [u[ser]:]uid [:perms]
so use it instead of the -d switch.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Brandon Casey noticed that t5505 had accidentally broken its && chain,
hiding inconsistency between the code that writes the warning to the
standard output and the test that expects to see the warning on the
standard error, which was introduced by f8948e2 (remote prune: warn
dangling symrefs, 2009-02-08).
It turns out that the issue is deeper than that. After f8948e2, a symref
that is dangling is marked with a NULL sha1, and the idea of using NULL
sha1 to mean a deleted ref was scrapped, but somehow a follow-up eafb452
(do_one_ref(): null_sha1 check is not about broken ref, 2009-07-22)
incorrectly reorganized do_one_ref(), still thinking NULL sha1 is never
used in the code.
Fix this by:
- adopt Brandon's fix to t5505 test;
- introduce REF_BROKEN flag to mark a ref that fails to resolve (dangling
symref);
- move the check for broken ref back inside the "if we are skipping
dangling refs" code block.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sd/format-patch-to:
send-email: add --no-cc, --no-to, and --no-bcc
format-patch: add --no-cc, --no-to, and --no-add-headers
format-patch: use a string_list for headers
Add 'git format-patch --to=' option and 'format.to' configuration variable.
* tc/http-cleanup:
remote-curl: init walker only when needed
remote-curl: use http_fetch_ref() instead of walker wrapper
http: init and cleanup separately from http-walker
http-walker: cleanup more thoroughly
http-push: remove "|| 1" to enable verbose check
t554[01]-http-push: refactor, add non-ff tests
t5541-http-push: check that ref is unchanged for non-ff test
* ld/push-porcelain:
t5516: Use test_cmp when appropriate
git-push: add tests for git push --porcelain
git-push: make git push --porcelain print "Done"
git-push: send "To <remoteurl>" messages to the standard output in --porcelain mode
git-push: fix an advice message so it goes to stderr
Conflicts:
transport.c
* jh/notes: (33 commits)
Documentation: fix a few typos in git-notes.txt
notes: fix malformed tree entry
builtin-notes: Minor (mostly parse_options-related) fixes
builtin-notes: Add "copy" subcommand for copying notes between objects
builtin-notes: Misc. refactoring of argc and exit value handling
builtin-notes: Add -c/-C options for reusing notes
builtin-notes: Refactor handling of -F option to allow combining -m and -F
builtin-notes: Deprecate the -m/-F options for "git notes edit"
builtin-notes: Add "append" subcommand for appending to note objects
builtin-notes: Add "add" subcommand for adding notes to objects
builtin-notes: Add --message/--file aliases for -m/-F options
builtin-notes: Add "list" subcommand for listing note objects
Documentation: Generalize git-notes docs to 'objects' instead of 'commits'
builtin-notes: Add "prune" subcommand for removing notes for missing objects
Notes API: prune_notes(): Prune notes that belong to non-existing objects
t3305: Verify that removing notes triggers automatic fanout consolidation
builtin-notes: Add "remove" subcommand for removing existing notes
Teach builtin-notes to remove empty notes
Teach notes code to properly preserve non-notes in the notes tree
t3305: Verify that adding many notes with git-notes triggers increased fanout
...
Conflicts:
Makefile
git rebase allows you to specify a non-branch commit-ish as the "branch"
argument, which leaves HEAD detached when it's finished. This is
occasionally useful, and this patch brings the same functionality to git
rebase --interactive.
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test is to prepare an empty file "camelcase" in the index, remove
and replace it with another file "CamelCase" with "1" as its contents
in the working tree, and add it to the index, in a repository configured
to be case insensitive.
However, the test actually checked ls-files knows about a pathname that
matches "camelcase" case insensitively. It didn't check if the added
contents actually was the updated one.
Mark the test as non-working.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.7.0 submodules are considered dirty when they contain untracked
files. But when git status is called with the "-uno" option, the user
asked to ignore untracked files, so they must be ignored in submodules
too. To achieve this, the new flag DIFF_OPT_IGNORE_UNTRACKED_IN_SUBMODULES
is introduced.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
don't use default revision if a rev was specified
for_each_recent_reflog_ent(): use strbuf, fix offset handling
t/Makefile: remove test artifacts upon "make clean"
blame: fix indent of line numbers
If a revision is specified, it happens not to have any commits, don't
use the default revision. By doing so, surprising and undesired
behavior can happen, such as showing the reflog for HEAD when a branch
was specified.
[jc: squashed a test from René]
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct the calculation of the number of digits for line counts of the
form 10^n-1 (9, 99, ...) in lineno_width(). This makes blame stop
printing an extra space before the line numbers of files with that many
total lines.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rewrite-root option seems to be a bit problematic with merge
detecting, so it's better to have a merge detecting test with it
turned on.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Testing if the output "new commits" should appear in the long format of
"git status" is done by comparing the hashes of the diffpair. This always
resulted in printing "new commits" for submodules that contained untracked
or modified content, even if they did not contain new commits. The reason
was that match_stat_with_submodule() did set the "changed" flag for dirty
submodules, resulting in two->sha1 being set to the null_sha1 at the call
sites, which indicates that new commits are present. This is changed so
that when no new commits are present, the same object names are in the
sha1 field for both sides of the filepair, and the working tree side will
have the "dirty_submodule" flag set when appropriate. For a submodule to
be seen as modified even when it just has a dirty work tree, some
conditions had to be extended to also check for the "dirty_submodule"
flag.
Unfortunately the test case that should have found this bug had been
changed incorrectly too. It is fixed and extended to test for other
combinations too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running 'git notes copy -h' is not very helfpul right now. It lists
the options for all the git notes subcommands and is rather confusing.
Fix this by splitting cmd_notes() into separate functions for each
subcommand (besides append and edit since they're very similar) and
only providing a usage message for the subcommand.
This has an added benefit of reducing the code complexity while making
it safer and easier to read. The downside is we get some code bloat
from similar setup and teardown needed for notes and options parsing.
We also get a bit stricter in options parsing by only allowing
the ref option to come before the subcommand.
Acked-by: Johan Herland <johan@herland.net>
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teaches 'git commit --amend' to copy notes. The catch is that this
must also be guarded by --no-post-rewrite, which we use to prevent
--amend from copying notes during a rebase -i 'edit'/'reword'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luckily, all the support already happens to be there.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement helper functions to load the rewriting config, and to
actually copy the notes. Also document the config.
Secondly, also implement an undocumented --for-rewrite=<cmd> option to
'git notes copy' which is used like --stdin, but also puts the
configuration for <cmd> into effect. It will be needed to support the
copying in git-rebase.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This implements a mass-copy command that takes a sequence of lines in
the format
<from-sha1> SP <to-sha1> [ SP <rest> ] LF
on stdin, and copies each <from-sha1>'s notes to the <to-sha1>. The
<rest> is ignored. The intent, of course, is that this can read the
same input that the 'post-rewrite' hook gets.
The copy_note() function is exposed for everyone's and in particular
the next commit's use.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aside from the same issue that rebase also has (remembering the
original commit across a conflict resolution), rebase -i brings an
extra twist: We need to defer writing the rewritten list in the case
of {squash,fixup} because their rewritten result should be the last
commit in the squashed group.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to deal with two separate code paths: a normal rebase, which
actually goes through git-am; and rebase {-m|-s}.
The only small issue with both is that they need to remember the
original sha1 across a possible conflict resolution. rebase -m
already puts this information in $dotest/current, and we just
introduce a similar file for git-am.
Note that in git-am, the hook really only runs when coming from
git-rebase: the code path that sets the $dotest/original-commit file
is guarded by a test for $dotest/rebasing.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rough structure of run_rewrite_hook() comes from
run_receive_hook() in receive-pack.
We introduce a --no-post-rewrite option and use it to avoid the hook
when called from git-rebase -i 'edit'. The next patch will add full
support in git-rebase, and we only want to invoke the hook once.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, you can set notes.displayRef to a glob that points at
your favourite notes refs, e.g.,
[notes]
displayRef = refs/notes/*
Then git-log and friends will show notes from all trees.
Thanks to Junio C Hamano for lots of feedback, which greatly
influenced the design of the entire series and this commit in
particular.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently using test_cmp would make debugging test scripts far easier,
as output from them run under "-v" option becomes readable.
Besides, some platforms' "diff" implementations lack "-q" option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently using test_cmp would make debugging test scripts far easier,
as output from them run under "-v" option becomes readable.
Besides, some platforms' "diff" implementations lack "-q" option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sd/init-template:
wrap-for-bin: do not export an empty GIT_TEMPLATE_DIR
t/t0001-init.sh: add test for 'init with init.templatedir set'
init: having keywords without value is not a global error.
Add a "TEMPLATE DIRECTORY" section to git-init[1].
Add `init.templatedir` configuration variable.
* sh/am-keep-cr:
git-am: Add tests for `--keep-cr`, `--no-keep-cr` and `am.keepcr`
git-am: Add am.keepcr and --no-keep-cr to override it
git-am: Add command line parameter `--keep-cr` passing it to git-mailsplit
documentation: 'git-mailsplit --keep-cr' is not hidden anymore
Given that "git show" always shows some diff and does not walk the history
by default, it is natural to expect "git show --first-parent" to show the
difference between the given commit and its first parent. It also would
be natural, given that "--cc" is the default, "git show -m" to show
pairwise difference from each of the parents.
We however always defaulted to --cc and there was no way to turn it off.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, "show" defaulted to "show --cc" (dense combined patch), but
asking for combined patch with "show -c" didn't turn the patch output
format on; the placement of this logic in setup_revisions() dates back to
cd2bdc5 (Common option parsing for "git log --diff" and friends,
2006-04-14).
This unfortunately cannot be done as a trivial change of "if dense
combined is asked, default to patch format" done in setup_revisions() to
"if any combined is asked, default to patch format", as "diff-tree -c"
needs to default to raw, while "diff-tree --cc" needs to default to patch,
and they share the codepath. These command specific defaults are now
handled in the new "tweak" callback that can be customized by individual
command implementations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no way to override the sendemail.to, sendemail.cc, and
sendemail.bcc config settings. Add options allowing the user to tell
git to ignore the config settings and take whatever is on the command
line.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These new options allow users to override their config settings for
format.cc, format.to and format.headers respectively. These options
only make git ignore the config settings and any previous command line
options, so you'll still have to add more command line options to add
extra headers. For example,
$ cat .git/config
[format]
to = Someone <someone@out.there>
$ git format-patch -1 --no-to --to="Someone Else <else@out.there>"
would format a patch addressed to "Someone Else" and not "Someone".
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.7.0 there are three reasons a submodule is considered modified
against the work tree: It contains new commits, modified content or
untracked content. Lets show all reasons in the long format of git status,
so the user can better asses the nature of the modification. This change
does not affect the short and porcelain formats.
Two new members are added to "struct wt_status_change_data" to store the
information gathered by run_diff_files(). wt-status.c uses the new flag
DIFF_OPT_DIRTY_SUBMODULES to tell diff-lib.c it wants to get detailed
dirty information about submodules.
A hint line for submodules is printed in the dirty header when dirty
submodules are present.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fetch-param:
fetch --all/--multiple: keep all the fetched branch information
builtin-fetch --all/--multi: propagate options correctly
t5521: fix and modernize
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
* sp/maint-push-sideband:
receive-pack: Send internal errors over side-band #2
t5401: Use a bare repository for the remote peer
receive-pack: Send hook output over side band #2
receive-pack: Wrap status reports inside side-band-64k
receive-pack: Refactor how capabilities are shown to the client
send-pack: demultiplex a sideband stream with status data
run-command: support custom fd-set in async
run-command: Allow stderr to be a caller supplied pipe
* jc/fetch-param:
fetch --all/--multiple: keep all the fetched branch information
builtin-fetch --all/--multi: propagate options correctly
t5521: fix and modernize
* nd/root-git:
Add test for using Git at root of file system
Support working directory located at root
Move offset_1st_component() to path.c
init-db, rev-parse --git-dir: do not append redundant slash
make_absolute_path(): Do not append redundant slash
Conflicts:
setup.c
sha1_file.c
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
In configuration files (and "git config --color" command line), we
supported one and only one attribute after foreground and background
color. Accept combinations of attributes, e.g.
[diff.color]
old = red reverse bold
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I used to set GREP_OPTIONS to exclude *.orig and *.rej files. But with this
the test t4252-am-options.sh fails because it calls grep with a .rej file:
grep "@@ -1,3 +1,3 @@" file-2.rej
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command "git rebase --whitespace=fix HEAD~<N>" is supposed to
only clean up trailing whitespace, and the expectation is that it
cannot fail.
Unfortunately, if one commit adds a blank line at the end of a file
and a subsequent commit adds more non-blank lines after the blank
line, "git apply" (used indirectly by "git rebase") will fail to apply
the patch of the second commit.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the next commit, we will make it possible for blank context
lines to match beyond the end of the file. That means that a hunk
with a preimage that has more lines than present in the file may
be possible to successfully apply. Therefore, we must remove
the quick rejection test in find_pos().
find_pos() will already work correctly without the quick
rejection test, but that might not be obvious. Therefore,
comment the test for handling out-of-range line numbers in
find_pos() and cast the "line" variable to the same (unsigned)
type as img->nr.
What are performance implications of removing the quick
rejection test?
It can only help "git apply" to reject a patch faster. For example,
if I have a file with one million lines and a patch that removes
slightly more than 50 percent of the lines and try to apply that
patch twice, the second attempt will fail slightly faster
with the test than without (based on actual measurements).
However, there is the pathological case of a patch with many
more context lines than the default three, and applying that patch
using "git apply -C1". Without the rejection test, the running
time will be roughly proportional to the number of context lines
times the size of the file. That could be handled by writing
a more complicated rejection test (it would have to count the
number of blanks at the end of the preimage), but I don't find
that worth doing until there is a real-world use case that
would benfit from it.
It would be possible to keep the quick rejection test if
--whitespace=fix is not given, but I don't like that from
a testing point of view.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
