Mark identifiers are used in fast-export and fast-import to provide a
label to refer to earlier content. Blobs are given labels because they
need to be referenced in the commits where they first appear with a
given filename, and commits are given labels because they can be the
parents of other commits. Tags were never given labels, probably
because they were viewed as unnecessary, but that presents two problems:
1. It leaves us without a way of referring to previous tags if we
want to create a tag of a tag (or higher nestings).
2. It leaves us with no way of recording that a tag has already been
imported when using --export-marks and --import-marks.
Fix these problems by allowing an optional mark label for tags.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If our input stream includes a tag which is later deleted, we were not
properly deleting it. We did have a step which would delete it, but we
left a tag in the tag list noting that it needed to be updated, and the
updating of annotated tags occurred AFTER ref deletion. So, when we
record that a tag needs to be deleted, also remove it from the list of
annotated tags to update.
While this has likely been something that has not happened in practice,
it will come up more in order to support nested tags. For nested tags,
we either need to give temporary names to the intermediate tags and then
delete them, or else we need to use the final name for the intermediate
tags. If we use the final name for the intermediate tags, then in order
to keep the sanity check that someone doesn't try to update the same tag
twice, we need to delete the ref after creating the intermediate tag.
So, either way nested tags imply the need to delete temporary inner tag
references.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-export allows specifying revision ranges, which can be used to
export a tag without exporting the commit it tags. fast-export handled
this rather poorly: it would emit a "from :0" directive. Since marks
start at 1 and increase, this means it refers to an unknown commit and
fast-import will choke on the input.
When we are unable to look up a mark for the object being tagged, use a
"from $HASH" directive instead to fix this problem.
Note that this is quite similar to the behavior fast-export exhibits
with commits and parents when --reference-excluded-parents is passed
along with an excluded commit range. For tags of excluded commits we do
not require the --reference-excluded-parents flag because we always have
to tag something. By contrast, when dealing with commits, pruning a
parent is always a viable option, so we need the flag to specify that
parent pruning is not wanted. (It is slightly weird that
--reference-excluded-parents isn't the default with a separate
--prune-excluded-parents flag, but backward compatibility concerns
resulted in the current defaults.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http transport lacked some optimization the native transports
learned to avoid unnecessary ref advertisement, which has been
corrected.
* jt/avoid-ls-refs-with-http:
transport: teach all vtables to allow fetch first
transport-helper: skip ls-refs if unnecessary
The list-objects-filter API (used to create a sparse/lazy clone)
learned to take a combined filter specification.
* md/list-objects-filter-combo:
list-objects-filter-options: make parser void
list-objects-filter-options: clean up use of ALLOC_GROW
list-objects-filter-options: allow mult. --filter
strbuf: give URL-encoding API a char predicate fn
list-objects-filter-options: make filter_spec a string_list
list-objects-filter-options: move error check up
list-objects-filter: implement composite filters
list-objects-filter-options: always supply *errbuf
list-objects-filter: put omits set in filter struct
list-objects-filter: encapsulate filter components
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
Optimize unnecessary full-tree diff away from "git log -L" machinery.
* sg/line-log-tree-diff-optim:
line-log: avoid unnecessary full tree diffs
line-log: extract pathspec parsing from line ranges into a helper function
Command line completion updates for "git -c var.name=val"
* sg/complete-configuration-variables:
completion: complete config variables and values for 'git clone --config='
completion: complete config variables names and values for 'git clone -c'
completion: complete values of configuration variables after 'git -c var='
completion: complete configuration sections and variable names for 'git -c'
completion: split _git_config()
completion: simplify inner 'case' pattern in __gitcomp()
completion: use 'sort -u' to deduplicate config variable names
completion: deduplicate configuration sections
completion: add tests for 'git config' completion
completion: complete more values of more 'color.*' configuration variables
completion: fix a typo in a comment
A new "pre-merge-commit" hook has been introduced.
* js/pre-merge-commit-hook:
merge: --no-verify to bypass pre-merge-commit hook
git-merge: honor pre-merge-commit hook
merge: do no-verify like commit
t7503: verify proper hook execution
Tell cURL library to use the same malloc() implementation, with the
xmalloc() wrapper, as the rest of the system, for consistency.
* cb/curl-use-xmalloc:
http: use xmalloc with cURL
xmalloc() used to have a mechanism to ditch memory and address
space resources as the last resort upon seeing an allocation
failure from the underlying malloc(), which made the code complex
and thread-unsafe with dubious benefit, as major memory resource
users already do limit their uses with various other mechanisms.
It has been simplified away.
* jk/drop-release-pack-memory:
packfile: drop release_pack_memory()
"git rebase --rebase-merges" learned to drive different merge
strategies and pass strategy specific options to them.
* js/rebase-r-strategy:
t3427: accelerate this test by using fast-export and fast-import
rebase -r: do not (re-)generate root commits with `--root` *and* `--onto`
t3418: test `rebase -r` with merge strategies
t/lib-rebase: prepare for testing `git rebase --rebase-merges`
rebase -r: support merge strategies other than `recursive`
t3427: fix another incorrect assumption
t3427: accommodate for the `rebase --merge` backend having been replaced
t3427: fix erroneous assumption
t3427: condense the unnecessarily repetitive test cases into three
t3427: move the `filter-branch` invocation into the `setup` case
t3427: simplify the `setup` test case significantly
t3427: add a clarifying comment
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
When running make from a clean environment, all of the *.po files should
be converted into *.msg files. After that, when make is run without any
changes, make should not do anything.
After beffae768a (gitk: Add Chinese (zh_CN) translation, 2017-03-11),
zh_CN.po was introduced. When make was run, a zh_cn.msg file was
generated (notice the lowercase). However, since make is case-sensitive,
it expects zh_CN.po to generate a zh_CN.msg file so make will keep
reattempting to generate a zh_CN.msg so successive make invocations
result in
Generating catalog po/zh_cn.msg
msgfmt --statistics --tcl po/zh_cn.po -l zh_cn -d po/
317 translated messages.
happening continuously.
Rename zh_CN.po to zh_cn.po so that when make generates the zh_cn.msg
file, it will realize that it was successfully generated and only run
once.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://ozlabs.org/~paulus/gitk:
gitk: Do not mistake unchanged lines for submodule changes
gitk: Use right colour for remote refs in the "Tags and heads" dialog
gitk: Add Chinese (zh_CN) translation
gitk: Make web links clickable
Selecting whether to "Amend Last Commit" or not does not have a hotkey.
With this patch, the user may toggle between the two options with
CTRL/CMD+e.
Signed-off-by: Birger Skogeng Pedersen <birger.sp@gmail.com>
Rebased-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Unchanged lines are prefixed with a white-space, thus unchanged lines
starting with either " <" or " >" are mistaken for submodule changes.
Check if a line starts with either " <" or " >" only if we are listing
the changes of a submodule.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Makes it easier to see which refs are local and which refs are remote.
Adds consistency with the remote background colour in the graph display.
Signed-off-by: Paul Wise <pabs3@bonedaddy.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Change the amend setting from two radio buttons ("New commit" and "Amend
commit") to a single checkbutton. The two radio buttons can never be
selected together because they are exactly the opposite of each other,
so it makes sense to change it to a single checkbutton.
* bw/amend-checkbutton:
git-gui: convert new/amend commit radiobutton to checkbutton
While the commit message widget has a configurable fixed width, it
nevertheless allowed to write commit messages which exceeded this limit.
Though there is no visual clue, that there is scrolling going on. Now
there is a horizontal scrollbar.
There seems to be a bug in at least Tcl/Tk up to version 8.6.8, which
does not update the horizontal scrollbar if one removes the whole
content at once.
Suggested-by: Birger Skogeng Pedersen <birger.sp@gmail.com>
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Its a bi-state anyway and also saves one line in the menu.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
git-gui learned to revert selected lines and hunks, just like it can
stage selected lines and hunks. To provide a safety net for accidental
revert, the most recent revert can be undone.
* py/revert-hunks-lines:
git-gui: allow undoing last revert
git-gui: return early when patch fails to apply
git-gui: allow reverting selected hunk
git-gui: allow reverting selected lines
git-gui learned to switch focus between widgets "unstaged commits",
"staged commits", "diff", and "commit message" using the keyboard
shortcuts Alt+1, Alt+2, Alt+3, and Alt+4 respectively.
* bp/widget-focus-hotkeys:
git-gui: add hotkeys to set widget focus
The user cannot change focus between the list of files, the diff view and
the commit message widgets without using the mouse (clicking either of
the four widgets).
With this patch, the user may set ui focus to the previously selected path
in either the "Unstaged Changes" or "Staged Changes" widgets, using
ALT+1 or ALT+2.
The user may also set the ui focus to the diff view widget with
ALT+3, or to the commit message widget with ALT+4.
This enables the user to select/unselect files, view the diff and create a
commit in git-gui using keyboard-only.
Signed-off-by: Birger Skogeng Pedersen <birger.sp@gmail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
The "git am" based backend of "git rebase" ignored the result of
updating ".gitattributes" done in one step when replaying
subsequent steps.
* bc/reread-attributes-during-rebase:
am: reload .gitattributes after patching it
path: add a function to check for path suffix
"for-each-ref" and friends that shows refs did not protect themselves
against ancient tags that did not record tagger names when asked to
show "%(taggername)", which have been corrected.
* mp/for-each-ref-missing-name-or-email:
ref-filter: initialize empty name or email fields
On-demand object fetching in lazy clone incorrectly tried to fetch
commits from submodule projects, while still working in the
superproject, which has been corrected.
* jt/diff-lazy-fetch-submodule-fix:
diff: skip GITLINK when lazy fetching missing objs
"git fetch" learned "--set-upstream" option to help those who first
clone from their private fork they intend to push to, add the true
upstream via "git remote add" and then "git fetch" from it.
* cb/fetch-set-upstream:
pull, fetch: add --set-upstream option
"git archive" recorded incorrect length in extended pax header in
some corner cases, which has been corrected.
* rs/pax-extended-header-length-fix:
archive-tar: turn length miscalculation warning into BUG
archive-tar: use size_t in strbuf_append_ext_header()
archive-tar: fix pax extended header length calculation
archive-tar: report wrong pax extended header length
We promoted the "indent heuristics" that decides where to split
diff hunks from experimental to the default a few years ago, but
some stale documentation still marked it as experimental, which has
been corrected.
* sg/diff-indent-heuristic-non-experimental:
diff: 'diff.indentHeuristic' is no longer experimental
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
The command line parser learned "--end-of-options" notation; the
standard convention for scripters to have hardcoded set of options
first on the command line, and force the command to treat end-user
input as non-options, has been to use "--" as the delimiter, but
that would not work for commands that use "--" as a delimiter
between revs and pathspec.
* jk/eoo:
gitcli: document --end-of-options
parse-options: allow --end-of-options as a synonym for "--"
revision: allow --end-of-options to end option parsing
Further clean-up of the initialization code.
* jk/repo-init-cleanup:
config: stop checking whether the_repository is NULL
common-main: delay trace2 initialization
t1309: use short branch name in includeIf.onbranch test
fast-export and fast-import can easily handle the simple rewrite that
was being done by filter-branch, and should be faster on systems with a
slow fork. Measuring the overall time taken for all of t3427 (not just
the difference between filter-branch and fast-export/fast-import) shows
a speedup of about 5% on Linux and 11% on Mac.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying multiple patches with git am, or when rebasing using the
am backend, it's possible that one of our patches has updated a
gitattributes file. Currently, we cache this information, so if a
file in a subsequent patch has attributes applied, the file will be
written out with the attributes in place as of the time we started the
rebase or am operation, not with the attributes applied by the previous
patch. This problem does not occur when using the -m or -i flags to
rebase.
To ensure we write the correct data into the working tree, expire the
cache after each patch that touches a path ending in ".gitattributes".
Since we load these attributes in multiple separate files, we must
expire them accordingly.
Verify that both the am and rebase code paths work correctly, including
the conflict marker size with am -3.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes gitk look for http or https URLs in the commit description
and make the URLs clickable. Clicking on them will invoke an external
web browser with the URL.
The web browser command is by default "xdg-open" on Linux, "open" on
MacOS, and "cmd /c start" on Windows. The command can be changed in
the preferences window, and it can include parameters as well as the
command name. If it is set to the empty string then URLs will no
longer be made clickable.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
