Instead of the time the formatter was run, show the timestamp
recorded in the commit in the documentation.
* fc/doc-use-datestamp-in-commit:
doc: set actual revdate for manpages
The on-disk reverse index that allows mapping from the pack offset
to the object name for the object stored at the offset has been
enabled by default.
* tb/pack-revindex-on-disk:
t: invert `GIT_TEST_WRITE_REV_INDEX`
config: enable `pack.writeReverseIndex` by default
pack-revindex: introduce `pack.readReverseIndex`
pack-revindex: introduce GIT_TEST_REV_INDEX_DIE_ON_DISK
pack-revindex: make `load_pack_revindex` take a repository
t5325: mark as leak-free
pack-write.c: plug a leak in stage_tmp_packfiles()
Geometric repacking ("git repack --geometric=<n>") in a repository
that borrows from an alternate object database had various corner
case bugs, which have been corrected.
* ps/fix-geom-repack-with-alternates:
repack: disable writing bitmaps when doing a local repack
repack: honor `-l` when calculating pack geometry
t/helper: allow chmtime to print verbosely without modifying mtime
pack-objects: extend test coverage of `--stdin-packs` with alternates
pack-objects: fix error when same packfile is included and excluded
pack-objects: fix error when packing same pack twice
pack-objects: split out `--stdin-packs` tests into separate file
repack: fix generating multi-pack-index with only non-local packs
repack: fix trying to use preferred pack in alternates
midx: fix segfault with no packs and invalid preferred pack
The sendemail-validate validate hook learned to pass the total
number of input files and where in the sequence each invocation is
via environment variables.
* rj/send-email-validate-hook-count-messages:
send-email: export patch counters in validate environment
The code to parse capability list for v0 on-wire protocol fell into
an infinite loop when a capability appears multiple times, which
has been corrected.
* jk/protocol-cap-parse-fix:
v0 protocol: use size_t for capability length/offset
t5512: test "ls-remote --heads --symref" filtering with v0 and v2
t5512: allow any protocol version for filtered symref test
t5512: add v2 support for "ls-remote --symref" test
v0 protocol: fix sha1/sha256 confusion for capabilities^{}
t5512: stop referring to "v1" protocol
v0 protocol: fix infinite loop when parsing multi-valued capabilities
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
"git branch --format=..." and "git format-patch --format=..."
learns "--omit-empty" to hide refs that whose formatting result
becomes an empty string from the output.
* ow/ref-filter-omit-empty:
branch, for-each-ref, tag: add option to omit empty lines
"git archive" run from a subdirectory mishandled attributes and
paths outside the current directory.
* rs/archive-from-subdirectory-fixes:
archive: improve support for running in subdirectory
"git clone --local" stops copying from an original repository that
has symbolic links inside its $GIT_DIR; an error message when that
happens has been updated.
* gc/better-error-when-local-clone-fails-with-symlink:
clone: error specifically with --local and symlinked objects
Code clean-up to replace a hardcoded constant with a CPP macro.
* rs/get-tar-commit-id-use-defined-const:
get-tar-commit-id: use TYPEFLAG_GLOBAL_HEADER instead of magic value
The approxidate() API has been simplified by losing an extra
function that did the same thing as another one.
* rs/remove-approxidate-relative:
date: remove approxidate_relative()
The userdiff regexp patterns for various filetypes that are built
into the system have been updated to avoid triggering regexp errors
from UTF-8 aware regex engines.
* rs/userdiff-multibyte-regex:
userdiff: support regexec(3) with multi-byte support
The examples are an ordered list, however, they are complex enough that
a callout is inside example 1, and that confuses the parsers as the list
continuation (`+`) is unclear (are we continuing the previous list item,
or the previous callout?).
We could use an open block as the asciidoctor documentation suggests,
but that has a tiny formatting issue (a newline is missing).
To simplify things for everyone (the reader, the writer, and the parser)
let's use subsections.
After this change, the HTML documentation generated with asciidoc has
the right indentation.
Cc: Jeff King <peff@peff.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callouts are directly tied to the listing above, remove spaces to
make it clear they are one and the same.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber noticed that connection via the git:// protocol no
longer worked after a recent header clean-up. This was caused by
funny interaction of few gotchas. First, a necessary definition
#define DEFAULT_GIT_PORT 9418
was made invisible to a place where
const char *port = STR(DEFAULT_GIT_PORT);
was expecting to turn the integer into "9418" with a clever STR()
macro, and ended up stringifying it to
const char *port = "DEFAULT_GIT_PORT";
without giving any chance to compilers to notice such a mistake.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean-up of the code path that deals with merge strategy option
handling in "git rebase".
* pw/rebase-cleanup-merge-strategy-option-handling:
rebase: remove a couple of redundant strategy tests
rebase -m: fix serialization of strategy options
rebase -m: cleanup --strategy-option handling
sequencer: use struct strvec to store merge strategy options
rebase: stop reading and writing unnecessary strategy state
"git branch -d origin/master" would say "no such branch", but it is
likely a missed "-r" if refs/remotes/origin/master exists. The
command has been taught to give such a hint in its error message.
* cm/branch-delete-error-message-update:
branch: improve error log on branch not found by checking remotes refs
"git mergetool" and "git difftool" learns a new configuration
guiDefault to optionally favor configured guitool over non-gui-tool
automatically when $DISPLAY is set.
* tk/mergetool-gui-default-config:
mergetool: new config guiDefault supports auto-toggling gui by DISPLAY
While parsing a .rev file, we check the header information to be sure it
makes sense. This happens before doing any additional validation such as
a checksum or value check. In order to differentiate between a bad
header and a non-existent file, we need to update the API for loading a
reverse index.
Make load_pack_revindex_from_disk() non-static and specify that a
positive value means "the file does not exist" while other errors during
parsing are negative values. Since an invalid header prevents setting up
the structures we would use for further validations, we can stop at that
point.
The place where we can distinguish between a missing file and a corrupt
file is inside load_revindex_from_disk(), which is used both by pack
rev-indexes and multi-pack-index rev-indexes. Some tests in t5326
demonstrate that it is critical to take some conditions to allow
positive error signals.
Add tests that check the three header values.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When checking a rev-index file, it may be helpful to identify exactly
which positions are incorrect. Compare the rev-index to a
freshly-computed in-memory rev-index and report the comparison failures.
This additional check (on top of the checksum validation) can help find
files that were corrupt by a single bit flip on-disk or perhaps were
written incorrectly due to a bug in Git.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous change added calls to verify_pack_revindex() in
builtin/fsck.c, but the implementation of the method was left empty. Add
the first and most-obvious check to this method: checksum verification.
While here, create a helper method in the test script that makes it easy
to adjust the .rev file and check that 'git fsck' reports the correct
error message.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'fsck' builtin checks many of Git's on-disk data structures, but
does not currently validate the pack rev-index files (a .rev file to
pair with a .pack and .idx file).
Before doing a more-involved check process, create the scaffolding
within builtin/fsck.c to have a new error type and add that error type
when the API method verify_pack_revindex() returns an error. That method
does nothing currently, but we will add checks to it in later changes.
For now, check that 'git fsck' succeeds without any errors in the normal
case. Future checks will be paired with tests that corrupt the .rev file
appropriately.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tb/pack-revindex-on-disk:
t: invert `GIT_TEST_WRITE_REV_INDEX`
config: enable `pack.writeReverseIndex` by default
pack-revindex: introduce `pack.readReverseIndex`
pack-revindex: introduce GIT_TEST_REV_INDEX_DIE_ON_DISK
pack-revindex: make `load_pack_revindex` take a repository
t5325: mark as leak-free
pack-write.c: plug a leak in stage_tmp_packfiles()
* maint-2.39: (34 commits)
Git 2.39.3
Git 2.38.5
Git 2.37.7
Git 2.36.6
Git 2.35.8
Makefile: force -O0 when compiling with SANITIZE=leak
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
range-diff: use ssize_t for parsed "len" in read_patches()
...
* maint-2.38: (32 commits)
Git 2.38.5
Git 2.37.7
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
...
* maint-2.37: (31 commits)
Git 2.37.7
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
...
* maint-2.36: (30 commits)
Git 2.36.6
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
...
* maint-2.35: (29 commits)
Git 2.35.8
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
...
* maint-2.34: (28 commits)
Git 2.34.8
Git 2.33.8
Git 2.32.7
Git 2.31.8
tests: avoid using `test_i18ncmp`
Git 2.30.9
gettext: avoid using gettext if the locale dir is not present
apply --reject: overwrite existing `.rej` symlink if it exists
http.c: clear the 'finished' member once we are done with it
clone.c: avoid "exceeds maximum object size" error with GCC v12.x
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
t5604: GETTEXT_POISON fix, conclusion
t5604: GETTEXT_POISON fix, part 1
t5619: GETTEXT_POISON fix
t0003: GETTEXT_POISON fix, conclusion
t0003: GETTEXT_POISON fix, part 1
t0033: GETTEXT_POISON fix
http: support CURLOPT_PROTOCOLS_STR
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
...
