The 'onto_name' state used in 'git rebase --merge' is currently read
once for each commit that need to be applied. It doesn't change
between each iteration, however, so it should be moved out of the
loop. This also makes the code more readable. Also remove the unused
variable 'end'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code reading the state saved in $merge_dir or $rebase_dir is
currently spread out in many places, making it harder to read and to
introduce additional state. Extract this code into one method that
reads the state. Only extract the code associated with the state that
is written when the rebase is initiated. Leave the state that changes
for each commmit, at least for now.
Currently, when resuming a merge-based rebase using --continue or
--skip, move_to_original_branch (via finish_rb_merge) will be called
without head_name and orig_head set. These variables are then lazily
read in move_to_original_branch if head_name is not set (together with
onto, which is unnecessarily read again). Change this by always
eagerly reading the state, for both am-based and merge-based rebase,
in the --continue and --skip cases. Note that this does not change the
behavior for am-based rebase, which read the state eagerly even before
this commit.
Reading the state eagerly means that part of the state will sometimes
be read unnecessarily. One example is when the rebase is continued,
but stops again at another merge conflict. Another example is when the
rebase is aborted. However, since both of these cases involve user
interaction, the delay is hopefully not noticeable. The
call_merge/continue_merge loop is not affected.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the old variable name 'dotest' for
"$GIT_DIR"/rebase-merge and no variable for "$GIT_DIR"/rebase-apply,
introduce two variables 'merge_dir' and 'apply_dir' for these paths.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
When you give a non-existent branch to git-rebase, it spits
out the usage. This can be confusing, since you may
understand the usage just fine, but simply have made a
mistake in the branch name.
Before:
$ git rebase origin bogus
Usage: git rebase ...
After:
$ git rebase origin bogus
fatal: no such branch: bogus
Usage: git rebase ...
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a ref/pathname conflict, checkout will
already do the right thing and checkout the ref. However,
for a non-existant ref, this has two advantages:
1. If a file with that pathname exists, rebase will
refresh the file from the index and then rebase the
current branch instead of producing an error.
2. If no such file exists, the error message using an
explicit "--" is better:
# before
$ git rebase -i origin bogus
error: pathspec 'bogus' did not match any file(s) known to git.
Could not checkout bogus
# after
$ git rebase -i origin bogus
fatal: invalid reference: bogus
Could not checkout bogus
The problems seem to be trigger-able only through "git
rebase -i", as regular git-rebase checks the validity of the
branch parameter as a ref very early on. However, it doesn't
hurt to be defensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If rebase.stat is set to true, a diffstat should be displayed. If it is
not set, it should default to false. However, if it is explicitly set to
false (or other value), a diffstat is still displayed, which is probably
not what most users would expect. Show diffstat only if it is set
to true.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a non-interactive rebase of a ref fails at commit X and is aborted by
the user, the ref will be updated twice. First to point at X (with the
reflog message "rebase finished: $head_name onto $onto"), and then back
to $orig_head. It should not be updated at all.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interactive rebase allows the '--verify' option to be passed, but it will
be ignored. Implement proper support for the option for both interactive
and non-interactive rebase by making it override any previous
'--no-verify'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If any strategy options are passed to -X, the strategy will always be
set to 'recursive'. According to the documentation, it should default to
'recursive' if it is not set, but it should be possible to set it to
other values.
This fixes a regression introduced in v1.7.3-rc0~67^2 (2010-07-29).
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although Git interally has the facility to differentiate between
porcelain and plubmbing commands and appropriately print errors,
several shell scripts invoke plubming commands triggering cryptic
plumbing errors to be displayed on a porcelain interface. This patch
replaces the "needs update" message in git-pull and git-rebase, when
`git update-index` is run, with a more friendly message.
Reported-by: Joshua Jensen <jjensen@workspacewhiz.com>
Reported-by: Thore Husfeldt <thore.husfeldt@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the case of "diff.noprefix" in git-config, git-format-patch should
still output diff with standard prefixes for git-am
Signed-off-by: Oded Shimon <ods15@ods15.dyndns.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to two missing hyphens, The "force" keyword on the command line
would be taken as an alias for the --force-rebase option.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase calls out to merge strategies, but did not support merge
strategy options so far. Add this, in the same style used in
git-merge.
Sadly we have to do the full quoting/eval dance here, since
merge-recursive supports the --subtree=<path> option which potentially
contains whitespace.
This patch does not cover git rebase -i, which does not call any merge
strategy directly except in --preserve-merges, and even then only for
merges.
[jc: with a trivial fix-up for 'expr']
Signed-off-by: Mike Lundy <mike@fluffypenguin.org>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a non-interactive rebase, sometimes
"git rebase --continue" will fail if an unmodified file is
touched in the working directory:
You must edit all merge conflicts and then
mark them as resolved using git add
This is caused by "git diff-files" reporting a difference
between the index and the filesystem:
:100644 100644 d00491...... 000000...... M file
The fix is to run "git update-index --refresh" before
"git diff-files" as is done in git-rebase--interactive.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently do not disable diff.renames configuration while rebase
internally runs "format-patch" to feed "am -3".
The end user configuration for "diff" should not affect the result
produced by the higher level command that is related to "diff" only
because internally it is implemented in terms of it.
For that matter, I have a feeling that format-patch should not even look
at diff.renames, but we seem to have been doing this for a long time so
there is no easy way to fix this thinko.
In any case, here is a much straightforward fix for "rebase".
[jn: with test case from David]
Reported-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strip out options before checking for a missing upstream argument.
Before:
$ git rebase -m
shift: 426: can't shift that many
After:
$ git rebase -m
Usage: git rebase ...
While at it, fix the usage message to explain that the upstream
argument is mandatory.
Reported-by: Jon Dowland <jmtd@debian.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
For git-rebase.sh, --no-ff is a synonym for --force-rebase.
For git-rebase--interactive.sh, --no-ff cherry-picks all the commits in
the rebased branch, instead of fast-forwarding over any unchanged commits.
--no-ff offers an alternative way to deal with reverted merges. Instead of
"reverting the revert" you can use "rebase --no-ff" to recreate the branch
with entirely new commits (they're new because at the very least the
committer time is different). This obviates the need to revert the
reversion, as you can re-merge the new topic branch directly. Added an
addendum to revert-a-faulty-merge.txt describing the situation and how to
use --no-ff to handle it.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luckily, all the support already happens to be there.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to deal with two separate code paths: a normal rebase, which
actually goes through git-am; and rebase {-m|-s}.
The only small issue with both is that they need to remember the
original sha1 across a possible conflict resolution. rebase -m
already puts this information in $dotest/current, and we just
introduce a similar file for git-am.
Note that in git-am, the hook really only runs when coming from
git-rebase: the code path that sets the $dotest/original-commit file
is guarded by a test for $dotest/rebasing.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This regression was introduced by commit 0aa958d (rebase: replace
antiquated sed invocation, 2010-01-24), which changed the invocation of
"git rev-list | sed" to "git log".
It can be reproduced by something like this:
$ git rebase -s recursive origin/master
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the modern form of printing a commit subject instead of piping
the output of rev-list to sed.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-merge-base:
rebase -i: teach --onto A...B syntax
rebase: fix --onto A...B parsing and add tests
"rebase --onto A...B" replays history on the merge base between A and B
"checkout A...B" switches to the merge base between A and B
The previous patch didn't parse "rebase --onto A...B" correctly when A
isn't an empty string. It also tried to be careful to notice a case in
which there are more than one merge bases, but forgot to give --all option
to merge-base, making the test pointless.
Fix these problems and add a test script to verify. Improvements to the
script to parse A...B syntax was taken from review comments by Johannes
Schindelin.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a command line option to override rerere.autoupdate configuration
variable to make it more useful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has exported the GREP_OPTIONS environment variable, the output
from "grep" and "egrep" in scripted Porcelains may be different from what
they expect. For example, we may want to count number of matching lines,
by "grep" piped to "wc -l", and GREP_OPTIONS=-C3 will break such use.
The approach taken by this change to address this issue is to protect only
our own use of grep/egrep. Because we do not unset it at the beginning of
our scripts, hook scripts run from the scripted Porcelains are exposed to
the same insanity this environment variable causes when grep/egrep is used
to implement logic (e.g. "grep | wc -l"), and it is entirely up to the
hook scripts to protect themselves.
On the other hand, applypatch-msg hook may want to show offending words in
the proposed commit log message using grep to the end user, and the user
might want to set GREP_OPTIONS=--color to paint the match more visibly.
The approach to protect only our own use without unsetting the environment
variable globally will allow this use case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is in spirit similar to "checkout A...B". To re-queue a new set of
patches for a series that the original author prepared to apply on 'next'
on the same base as before, you would do something like this:
$ git checkout next^0
$ git am -s rerolled-series.mbox
$ git rebase --onto next...jh/notes next
The first two commands recreates commits to be rebased as the original
author intended (i.e. applies directly on top of 'next'), and the rebase
command replays that history on top of the same commit the series being
replaced was built on (which is typically much older than the tip of
'next').
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4cfbe06 introduced the use of "git diff" to show
dirty state in a format more familiar to users. However, it
should have used the plumbing "git diff-files" instead.
Not only is it good practice in general to use plumbing in
scripts, but in this case we really don't want the automatic
pager to kick in for an error message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous version expose the output of the plumbing update-index to the
user, which novice users have difficulty to understand.
We still need to run update-index to refresh the cache (if
diff.autorefreshindex is false, git diff won't do it).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --ignore-whitespace option and corresponding config bool to
ignore whitespace differences while applying patches, akin to the
'patch' program.
'git am', 'git rebase' and the bash git completion are made aware of
this option.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/quiet-porcelains:
stash: teach quiet option
am, rebase: teach quiet option
submodule, repack: migrate to git-sh-setup's say()
git-sh-setup: introduce say() for quiet options
am: suppress apply errors when using 3-way
t4150: test applying with a newline in subject
git-am and git-rebase are talkative scripts. Teach them to be quiet when
told, allowing them to speak only when they fail or experience errors.
The quiet option is maintained when git-am or git-rebase fails to apply
a patch. This means subsequent --resolved, --continue, --skip, --abort
invocations will be quiet if the original invocation was quiet.
Drop a handful of >&2 redirection; the rest of the program sends all the
info messages to stdout, not to stderr.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the options --committer-date-is-author-date and --ignore-date
to git-rebase. They were introduced in commit a79ec62d0 for git-am.
These options imply --force-rebase.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of --verbose is unchanged, but uses a different state
variable internally, so that the meaning of verbose output may be
expanded without affecting the diffstat. This is also reflected in
the documentation.
The configuration option rebase.stat works the same was as merg.stat,
but the default is currently false.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make sense to provide multiple upstream branches to either
git pull --rebase, or to git rebase, so disallow both.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normally, if the current branch is up to date, the rebase is aborted.
However, it may be desirable to allow rebasing even if the current
branch is up to date. When using the '--whitespace=fix' option -f is
implied.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-rebase a new option --root, which instructs it to rebase the
entire history leading up to <branch>. This option must be used with
--onto <newbase>, and causes commits that already exist in <newbase>
to be skipped. (Normal operation skips commits that already exist in
<upstream> instead.)
One possible use-case is with git-svn: suppose you start hacking
(perhaps offline) on a new project, but later notice you want to
commit this work to SVN. You will have to rebase the entire history,
including the root commit, on a (possibly empty) commit coming from
git-svn, to establish a history connection. This previously had to
be done by cherry-picking the root commit manually.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have unstaged changes in your working tree and try to
rebase, you will get the cryptic "foo: needs update"
message, but nothing else. If you have staged changes, you
get "your index is not up-to-date".
Let's improve this situation in two ways:
- for unstaged changes, let's also tell them we are
canceling the rebase, and why (in addition to the "needs
update" lines)
- for the staged changes case, let's use language that is a
little more clear to the user: their index contains
uncommitted changes
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is sometimes desirable to disable the safety net of pre-rebase hook
when the user knows what he is doing (for example, when the original
changes on the branch have not been shown to the public yet).
This teaches --no-verify option to git-rebase, which is similar to the way
pre-commit hook is bypassed by git-commit.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The original git-rebase honored pre-rebase hook so that public branches
can be protected from getting rebased, but rebase --interactive ignored
the hook entirely. This fixes it.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
As a result of implementation details, 'git rebase' could
previously only preserve merges in interactive mode. That
limitation was hard for users to understand and awkward to
explain.
This patch works around it by running the interactive rebase
helper git-rebase--interactive with GIT_EDITOR set to ':'
when the user passes "-p" but not "-i" to the rebase command.
The effect is that the interactive rebase helper is used but
the user never sees an editor.
The test-case included in this patch was originally written
by Stephen Habermann <stephen@exigencecorp.com>, but has
been extensively modified since its creation.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
"git rebase" without arguments on initial startup showed:
fatal: Needed a single revision
invalid upstream
This patch makes it show the ordinary usage string.
If .git/rebase-merge or .git/rebase-apply/rebasing exists, git-rebase
will die with a message saying that a rebase is in progress and the user
should try --skip/--abort/--continue.
If .git/rebase-apply/applying exists, git-rebase will die with a message
saying that git-am is in progress, regardless how many arguments are
given.
If no arguments are given and .git/rebase-apply/ exists, but neither a
rebasing nor applying file is in that directory, git-rebase dies with a
message saying that rebase-apply exists and no arguments were given.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-am, it sounds awkward to have the patches in ".git/rebase/",
but for technical reasons, we have to keep the same directory name
for git-am and git-rebase. ".git/rebase-apply" seems to be a good
compromise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the files generated and used during a rebase are never to be
tracked, they should live in $GIT_DIR. While at it, avoid the rather
meaningless term "dotest" to "rebase", and unhide ".dotest-merge".
This was wished for on the mailing list, but so far unimplemented.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When detaching the HEAD to the base commit, the "git checkout" command
could fail if, for example, upstream contains a file that would overrwrite
a local, untracked file. Unconditionally discarding the standard error
stream was done to squelch the progress and notices back when checkout
did not have -q option, but there is no reason to keep doing it anymore.
Noticed by Robert Shearman.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"merge" and "reset" leave the original point in history in ORIG_HEAD,
which makes it easy to go back to where you were before you inflict a
major damage to your history and realize that you do not like the result
at all. These days with reflog, we technically do not need to use
ORIG_HEAD, but it is a handy way nevertheless.
This teaches "am" and "rebase" (all forms --- the vanilla one that uses
"am" as its backend, "-m" variant that cherry-picks, and "--interactive")
to do the same.
The original idea and a partial implementation to do this only for "rebase
-m" was by Brian Gernhardt; this extends on his idea.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --continue" and friends gave nonsense errors when there is no
rebase in progress.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing or stashing, chances are that you do not care about
dirty submodules, since they are not updated by those actions anyway.
So ignore the submodules' states.
Note: the submodule states -- as committed in the superproject --
will still be stashed and rebased, it is _just_ the state of the
submodule in the working tree which is ignored.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bd/tests:
Rename the test trash directory to contain spaces.
Fix tests breaking when checkout path contains shell metacharacters
Don't use the 'export NAME=value' in the test scripts.
lib-git-svn.sh: Fix quoting issues with paths containing shell metacharacters
test-lib.sh: Fix some missing path quoting
Use test_set_editor in t9001-send-email.sh
test-lib.sh: Add a test_set_editor function to safely set $VISUAL
git-send-email.perl: Handle shell metacharacters in $EDITOR properly
config.c: Escape backslashes in section names properly
git-rebase.sh: Fix --merge --abort failures when path contains whitespace
Conflicts:
t/t9115-git-svn-dcommit-funky-renames.sh
On some shells (notably /bin/sh on FreeBSD 6.1), the
construct
foo && ! bar | baz
is true if
foo && baz
whereas for most other shells (such as bash) is true if
foo && ! baz
We can work around this by specifying
foo && ! (bar | baz)
which works everywhere.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also update t/t3407-rebase-abort.sh to expose the bug.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "git rebase [--onto O] A B" to omit an unnecessary checkout
of branch B before it goes on.
"git-rebase" originally was about rebasing the current branch to somewhere
else, and when the extra parameter to name which branch to rebase was
added, it defined the semantics to the safest but stupid "first switch to
the named branch and then operate exactly the same way as if we were
already on that branch".
But the first thing the real part of "rebase" does is to reset the work
tree and the index to the "onto" commit. Which means the "rebase that
branch" form switched the work tree to the tip of the branch only to
immediately switch again to another commit. This was wasteful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing changes that contain issues that the pre-commit hook flags
as problematic, the rebase cannot be continued. However, rebase is about
transplanting commits that are already made with as little distortion as
possible, and pre-commit check should not interfere.
Earlier, c5b09fe (Avoid update hook during git-rebase --interactive,
2007-12-19) fixed "rebase -i", but "rebase -m" shared the same issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, --abort would end by git resetting to ORIG_HEAD, but some
commands, such as git reset --hard (which happened in git rebase --skip,
but could just as well be typed by the user), would have already modified
ORIG_HEAD.
Just use the orig-head we store in $dotest instead.
[jc: cherry-picked from 48411d and 4947cf9 on 'master']
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Being in the project's top directory when starting or continuing a rebase
is not necessary since 533b703 (Allow whole-tree operations to be started
from a subdirectory, 2007-01-12).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option --rebasing is used internally for rebase to tell am that
it is being used for its purpose. This would leave .dotest/rebasing to
help "completion" scripts tell if the ongoing operation is am or rebase.
Also the option at the same time stands for --binary, -3 and -k which
are always given when rebase drives am as its backend.
Using the information "am" leaves, git-completion.bash tells ongoing
rebase and am apart.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, --abort would end by git resetting to ORIG_HEAD, but some
commands, such as git reset --hard (which happened in git rebase --skip,
but could just as well be typed by the user), would have already modified
ORIG_HEAD.
Just use the orig-head we store in $dotest instead.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have a file called HEAD in your work tree, many commands that
our scripts feed "HEAD" to would complain about the rev vs path
ambiguity. A solution is to form command line more carefully by
appending -- to them, which makes it clear that we mean HEAD rev not
HEAD file.
This patch would apply to maint.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
The --skip case was handled properly when rebasing without --merge,
but the --continue case was not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have a merge conflict and want to bypass the commit causing it,
you don't want to care about the dirty state of the working tree.
Also, don't git reset --hard HEAD in the rebase-skip test, so that the
lack of support for this is detected.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive version of rebase does all the operations on a detached
HEAD, so that after a successful rebase, <branch>@{1} is the pre-rebase
state. The reflogs of "HEAD" still show all the actions in detail.
This teaches the non-interactive version to do the same.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--text follows this line--
These commands currently lack OPTIONS_SPEC; allow people to
easily list with "git grep 'OPTIONS_SPEC=$'" what they can help
improving.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase used to fail when run from a path containing a space.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-rebase used to fail when run from a path containing a space.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-svn: don't attempt to spawn pager if we don't want one
Supplant the "while case ... break ;; esac" idiom
User Manual: add a chapter for submodules
user-manual: don't assume refs are stored under .git/refs
Detect exec bit in more cases.
Conjugate "search" correctly in the git-prune-packed man page.
Move the paragraph specifying where the .idx and .pack files should be
Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
A lot of shell scripts contained stuff starting with
while case "$#" in 0) break ;; esac
and similar. I consider breaking out of the condition instead of the
body od the loop ugly, and the implied "true" value of the
non-matching case is not really obvious to humans at first glance. It
happens not to be obvious to some BSD shells, either, but that's
because they are not POSIX-compliant. In most cases, this has been
replaced by a straight condition using "test". "case" has the
advantage of being faster than "test" on vintage shells where "test"
is not a builtin. Since none of them is likely to run the git
scripts, anyway, the added readability should be worth the change.
A few loops have had their termination condition expressed
differently.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The extra shift here causes failure to parse any commandline including
the -C option.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass --whitespace=<option> to git-apply. Since git-apply and git-am
expect this, I'm always surprised when I try to give it to git-rebase
and it doesn't work.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a topic branch is rebased, some of whose commits are already
cherry-picked upstream:
o--X--A--B--Y <- master
\
A--B--Z <- topic
then 'git rebase -m master' would report:
Already applied: 0001 Y
Already applied: 0002 Y
With this fix it reports the expected:
Already applied: 0001 A
Already applied: 0002 B
As an added bonus, this change also avoids 'echo' of a commit message,
which might contain escapements.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, "git rerere" was enabled by creating the directory
.git/rr-cache. That is definitely not in line with most other
features, which are enabled by a config variable.
So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.
If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.
[jc: with minimum tweaks]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consider this history:
o--o-...-B <- origin
\ \
x--x--M--x--x <- master
In this situation, rebase considers master fully up-to-date and would
not do anything. However, if there were additional commits on origin,
the rebase would run and move the commits x on top of origin.
Here we change rebase to short-circuit out only if the history since origin
is strictly linear. Consequently, the above as well as a history like this
would be linearized:
o--o <- origin
\
x--x
\ \
x--M--x--x <- master
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't you just hate the fact sometimes, that git-rebase just applies
the patches, without any possibility to edit them, or rearrange them?
With "--interactive", git-rebase now lets you edit the list of patches,
so that you can reorder, edit and delete patches.
Such a list will typically look like this:
pick deadbee The oneline of this commit
pick fa1afe1 The oneline of the next commit
...
By replacing the command "pick" with the command "edit", you can amend
that patch and/or its commit message, and by replacing it with "squash"
you can tell rebase to fold that patch into the patch before that.
It is derived from the script sent to the list in
<Pine.LNX.4.63.0702252156190.22628@wbgn013.biozentrum.uni-wuerzburg.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command is part of the main porcelain making git-add more
appropriate.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The rebase and merge commands used diff-tree to display the summary stats of
what files had changed from the operation. diff-tree does not read the
diff ui configuration options, so the diff.color setting was not used.
Have rebase and merge call diff rather than diff-tree, which does read the
diff ui options.
Signed-off-by: James Bowes <jbowes@dangerouslyinc.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This simplifies the shell code, reduces its memory footprint, and
speeds things up. The performance improvements should be noticable
when git-rebase works on big commits.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When you want to amend the commit message of 3 commits before
the tip of the current branch, say 'master',
A--B--C--D--E(master)
it is sometimes handy to make your head detached at that commit
with:
$ git checkout HEAD~3 ;# check out B
$ git commit --amend ;# without modifying contents...
to create:
.B'(HEAD)
/
A--B--C--D--E(master)
and then rebase 'master' branch onto HEAD with this:
$ git rebase HEAD master
to result in:
.B'-C'-D'-E(master=HEAD)
/
A--B--C--D--E
However, the current code interprets HEAD after it switches to
the branch 'master', which means the rebase will not do
anything. You have to say something unwieldly like this
instead:
$ git rebase $(git rev-parse HEAD) master
This fixes it by expanding the $onto commit name before
switching to the target branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add -C[NUM] to git-am and git-rebase so that patches can be applied even
if context has changed a bit.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the index wasn't clean, git-rebase would simply show the output from
git-diff-index with no further comment to the user.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates five commands (merge, pull, rebase, revert and cherry-pick)
so that they can be started from a subdirectory.
This may not actually be what we want to do. These commands are
inherently whole-tree operations, and an inexperienced user may
mistakenly expect a "git pull" from a subdirectory would merge
only the subdirectory the command started from.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user tries to run a porcelainish command which requires
a working directory in a bare repository they may get unexpected
results which are difficult to predict and may differ from command
to command.
Instead we should detect that the current repository is a bare
repository and refuse to run the command there, as there is no
working directory associated with it.
[jc: updated Shawn's original somewhat -- bugs are mine.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If a three-way merge in git-rebase generates a conflict then we
should take advantage of git-merge-recursive's ability to include
the branch name of each side of the conflict hunk by setting the
GITHEAD_* environment variables.
In the case of rebase there aren't really two clear branches; we
have the branch we are rebasing onto, and we have the branch we are
currently rebasing. Since most conflicts will be arising between
the user's current branch and the branch they are rebasing onto
we assume the stuff that isn't in the current commit is the "onto"
branch and the stuff in the current commit is the "current" branch.
This assumption may however come up wrong if the user resolves one
conflict in such a way that it conflicts again on a future commit
also being rebased. In this case the user's prior resolution will
appear to be in the "onto" part of the hunk.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio rightly pointed out that the --reflog-action parameter
was starting to get out of control, as most porcelain code
needed to hand it to other porcelain and plumbing alike to
ensure the reflog contained the top-level user action and
not the lower-level actions it invoked.
At Junio's suggestion we are introducing the new set_reflog_action
function to all shell scripts, allowing them to declare early on
what their default reflog name should be, but this setting only
takes effect if the caller has not already set the GIT_REFLOG_ACTION
environment variable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
An earlier commit made "reset --hard" chattier but leaking its
message from "git rebase" (which calls it when first rewinding
the current branch to prepare replaying our own changes) without
explanation was confusing, so add an extra message to mention
it. Inside restorestate in merge (which is rarely exercised
codepath, where more than one strategies are attempted),
resetting to the original state uses "reset --hard" -- this can
be squelched entirely.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Data in rr-cache isn't valid after a patch application is
skipped or and aborted, so our next commit could be misrecorded
as a resolution of that skipped/failed commit, which is wrong.
git-am --skip, git-rebase --skip/--abort will automatically
invoke git-rerere clear to avoid this.
Also, since git-am --resolved indicates a resolution was
succesful, remember to run git-rerere to record the resolution
(and not surprise the user when the next commit is made).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reduces the number of conflicts when rebasing after a series of
patches to the same piece of code is committed upstream.
Signed-off-by: Robert Shearman <rob@codeweavers.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This renames merge-recursive written in Python to merge-recursive-old,
and makes merge-recur as a synonym to merge-recursive. We do not remove
merge-recur yet, but we will remove merge-recur and merge-recursive-old
in a few releases down the road.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Previously, a rebasing operation with on a branch that is just tracking
an upstream branch would output a confusing "Nothing to do" due to no
patches being given to git-am.
The test brings the behaviour back into line with that of just before
e646c9c8c0.
Signed-off-by: Robert Shearman <rob@codeweavers.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/read-tree: (107 commits)
read-tree: move merge functions to the library
read-trees: refactor the unpack_trees() part
tar-tree: illustrate an obscure feature better
git.c: allow alias expansion without a git directory
setup_git_directory_gently: do not barf when GIT_DIR is given.
Build on Debian GNU/kFreeBSD
Call setup_git_directory() much earlier
Call setup_git_directory() early
Display an error from update-ref if target ref name is invalid.
Fix http-fetch
t4103: fix binary patch application test.
git-apply -R: binary patches are irreversible for now.
Teach git-apply about '-R'
Makefile: ssh-pull.o depends on ssh-fetch.c
log and diff family: honor config even from subdirectories
git-reset: detect update-ref error and report it.
lost-found: use fsck-objects --full
Teach git-http-fetch the --stdin switch
Teach git-local-fetch the --stdin switch
Make pull() support fetching multiple targets at once
...
During git-merge-recur development, you could set an environment
variable GIT_USE_RECUR_FOR_RECURSIVE to use WIP recur in place
of the recursive strategy.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is just an update for people being interested. Alex and me were
busy with that project for a few days now. While it has progressed nicely,
there are quite a couple TODOs in merge-recursive.c, just search for "TODO".
For impatient people: yes, it passes all the tests, and yes, according
to the evil test Alex did, it is faster than the Python script.
But no, it is not yet finished. Biggest points are:
- there are still three external calls
- in the end, it should not be necessary to write the index more than once
(just before exiting)
- a lot of things can be refactored to make the code easier and shorter
BTW we cannot just plug in git-merge-tree yet, because git-merge-tree
does not handle renames at all.
This patch is meant for testing, and as such,
- it compile the program to git-merge-recur
- it adjusts the scripts and tests to use git-merge-recur instead of
git-merge-recursive
- it provides "TEST", a script to execute the tests regarding -recursive
- it inlines the changes to read-cache.c (read_cache_from(), discard_cache()
and refresh_cache_entry())
Brought to you by Alex Riesen and Dscho
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some GIT's shell script are using bare 'perl' for perl invocation.
Use @@PERL@@ symbol and replace it with PERL_PATH_SQ everywhere.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
commit does not always succeed, so we'll have to check for
it in the absence of set -e. This fixes a regression
introduced in 9e4bc7dd1b
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There was a time when rebase --skip didn't work when used with
--merge, but that is no more so we don't need that message
anymore.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some implementations of "expr" (e.g. FreeBSD's) fail, if an
argument starts with a dash.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that we control the merge base selection, we won't be forced
into rolling things in that we wanted to skip beforehand.
Also, add a test to ensure this all works as intended.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We no longer have to recommit each patch to remove the parent
information we're rebasing since we're using the low-level merge
strategies directly instead of git-merge.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Enhance t3401-rebase-partial to test with --merge as well as
the standard am -3 strategy.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of using 4-digit numbers to name commits being rebased,
just use "cmt.$msgnum" string, with $msgnum as a decimal number
without leading zero padding. This makes it possible to rebase
more than 9999 commits, but of more practical importance is that
the earlier code used "printf" to format already formatted
$msgnum and barfed when it counted up to 0008. In other words,
the old code was incapable of rebasing more than 7 commits, and
this fixes that problem.
Signed-off-by: Junio C Hamano <junkio@cox.net>
recursive merge relies on Python, and we can't perform
rename-aware merges without the recursive merge. So bail out
before trying it.
The test won't work w/o recursive merge, either, so skip that,
too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This solves the problem of rebasing local commits against an
upstream that has renamed files.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git rebase [--onto <newbase>] <upstream> [<branch>]
git rebase --continue
git rebase --abort
Add "--continue" to restart the rebase process after
manually resolving conflicts. The user is warned if
there are still differences between the index and the
working files.
Add "--abort" to restore the original branch, and
remove the .dotest working files.
Some minor additions to the git-rebase documentation.
[jc: fix that applies to the maintenance track has been dealt
with separately.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some words, e.g., `match', are special to expr(1), and cause strange
parsing effects. Track down all uses of expr and mangle the arguments
so that this isn't a problem.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I found a paper thin man page for git-rebase, but was quite happy to
see something much more useful in the usage statement of the script
when I went there to find out how this thing worked. Here it is
cleaned up slightly and expanded a bit into the actual documentation.
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows you to rewrite history a bit more flexibly, by
separating the other branch name and new branch point. By
default, the new branch point is the same as the tip of the
other branch as before, but you can specify where you graft the
rebased branch onto.
When you have this ancestry graph:
A---B---C topic
/
D---E---F---G master
$ git rebase --onto master~1 master topic
would rewrite the history to look like this:
A'\''--B'\''--C'\'' topic
/
D---E---F---G master
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets a hook to interfere a rebase and help prevent certain
branches from being rebased by mistake. A sample hook to show
how to prevent a topic branch that has already been merged into
publish branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix bugs in git-rebase wrt rebasing another branch than
the current HEAD, rebasing with a dirty working dir,
and rebasing a proper decendant of the target branch.
[jc: with a bit of hand-merging]
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When switching to another branch and rebasing it in a one-go, it
failed to update the variable that holds the branch head, and
did not detect fast-forward situation correctly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
