The gitmodules API accessed from the C code learned to cache stuff
lazily.
* hv/submodule-config:
submodule: allow erroneous values for the fetchRecurseSubmodules option
submodule: use new config API for worktree configurations
submodule: extract functions for config set and lookup
submodule: implement a config API for lookup of .gitmodules values
"git config --list" output was hard to parse when values consist of
multiple lines. "--name-only" option is added to help this.
* sg/config-name-only:
get_urlmatch: avoid useless strbuf write
format_config: simplify buffer handling
format_config: don't init strbuf
config: restructure format_config() for better control flow
completion: list variable names reliably with 'git config --name-only'
config: add '--name-only' option to list only variable names
Remove a cache invalidation which would cause the shared index to be
rewritten on as-is commits.
When the cache-tree has changed, we need to update it. But we don't
necessarily need to update the shared index. So setting
active_cache_changed to SOMETHING_CHANGED is unnecessary. Instead, we
let update_main_cache_tree just update the CACHE_TREE_CHANGED bit.
In order to test this, make test-dump-split-index not segfault on
missing replace_bitmap/delete_bitmap. This new codepath is not called
now that the test passes, but is necessary to avoid a segfault when the
new test is run with the old builtin/commit.c code.
Signed-off-by: David Turner <dturner@twopensource.com>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-u and -i can only be given if -m, --reset, or --prefix is given.
Without parentheses, it looks like -u and -i can be used no matter
what, and the second pair of brackets is confusing.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message can be seen by running
`git config gc.reflogexpire foo` and then `git reflog expire`.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git am" that was recently reimplemented in C had a performance
regression in "git am --abort" that goes back to the version before
an attempted (and failed) patch application.
* pt/am-builtin-abort-fix:
am --skip/--abort: merge HEAD/ORIG_HEAD tree into index
"git clone $URL" in recent releases of Git contains a regression in
the code that invents a new repository name incorrectly based on
the $URL. This has been corrected.
* jk/guess-repo-name-regression-fix:
clone: use computed length in guess_dir_name
clone: add tests for output directory
The "lockfile" API has been rebuilt on top of a new "tempfile" API.
* mh/tempfile:
credential-cache--daemon: use tempfile module
credential-cache--daemon: delete socket from main()
gc: use tempfile module to handle gc.pid file
lock_repo_for_gc(): compute the path to "gc.pid" only once
diff: use tempfile module
setup_temporary_shallow(): use tempfile module
write_shared_index(): use tempfile module
register_tempfile(): new function to handle an existing temporary file
tempfile: add several functions for creating temporary files
prepare_tempfile_object(): new function, extracted from create_tempfile()
tempfile: a new module for handling temporary files
commit_lock_file(): use get_locked_file_path()
lockfile: add accessor get_lock_file_path()
lockfile: add accessors get_lock_file_fd() and get_lock_file_fp()
create_bundle(): duplicate file descriptor to avoid closing it twice
lockfile: move documentation to lockfile.h and lockfile.c
After "git am --opt1" stops, running "git am --opt2" pays attention
to "--opt2" only for the patch that caused the original invocation
to stop.
* pt/am-builtin-options:
am: let --signoff override --no-signoff
am: let command-line options override saved options
test_terminal: redirect child process' stdin to a pty
When linked worktree is used, simultaneous "notes merge" instances
for the same ref in refs/notes/* are prevented from stomping on
each other.
* dt/notes-multiple:
notes: handle multiple worktrees
worktrees: add find_shared_symref
All of the callsites covered by this change call write_file() or
write_file_gently() to create a one-liner file. Drop the caller
supplied LF and let these callees to append it as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All existing callers to this function use it to produce a text file
or an empty file, and a new callsite that mimick them must end their
payload with a LF. If they forget to do so, the resulting file will
end with an incomplete line.
Teach write_file_v() to complete the incomplete line, if exists, so
that the callers do not have to.
With this, the caller-side fix in builtin/am.c becomes unnecessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
That "someday" in the comment happened two years later in
b65982b (Optimize "diff-index --cached" using cache-tree - 2009-05-20)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git describe --contains' doesn't default to HEAD when no commit is
given, and it doesn't produce any output, not even an error:
~/src/git ((v2.5.0))$ ./git describe --contains
~/src/git ((v2.5.0))$ ./git describe --contains HEAD
v2.5.0^0
Unlike other 'git describe' options, the '--contains' code path is
implemented by calling 'name-rev' with a bunch of options plus all the
commit-ishes that were passed to 'git describe'. If no commit-ish was
present, then 'name-rev' got invoked with none, which then leads to the
behavior illustrated above.
Porcelain commands usually default to HEAD when no commit-ish is given,
and 'git describe' already does so in all other cases, so it should do
so with '--contains' as well.
Pass HEAD to 'name-rev' when no commit-ish is given on the command line
to make '--contains' behave consistently with other 'git describe'
options. While at it, use argv_array_pushv() instead of the loop to
pass commit-ishes to 'git name-rev'.
'git describe's short help already indicates that the commit-ish is
optional, but the synopsis in the man page doesn't, so update it
accordingly as well.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/git-path:
memoize common git-path "constant" files
get_repo_path: refactor path-allocation
find_hook: keep our own static buffer
refs.c: remove_empty_directories can take a strbuf
refs.c: avoid git_path assignment in lock_ref_sha1_basic
refs.c: avoid repeated git_path calls in rename_tmp_log
refs.c: simplify strbufs in reflog setup and writing
path.c: drop git_path_submodule
refs.c: remove extra git_path calls from read_loose_refs
remote.c: drop extraneous local variable from migrate_file
prefer mkpathdup to mkpath in assignments
prefer git_pathdup to git_path in some possibly-dangerous cases
add_to_alternates_file: don't add duplicate entries
t5700: modernize style
cache.h: complete set of git_path_submodule helpers
cache.h: clarify documentation for git_path, et al
All callers except three passed 1 for the "fatal" parameter to ask
this function to die upon error, but to a casual reader of the code,
it was not all obvious what that 1 meant. Instead, split the
function into two based on a common write_file_v() that takes the
flag, introduce write_file_gently() as a new way to attempt creating
a file without dying on error, and make three callers to call it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to terminate the payload given to write_file() with LF,
resulting in files that end with an incomplete line. Teach the
wrappers builtin/am uses to make sure it adds LF at the end as
necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many calls to write_file() that repeat the same pattern in
the implementation of the builtin version of "am". They all share
the same traits, i.e they
- produce a text file with a single string in it;
- have enough information to produce the entire contents of that
file;
- generate the pathname of the file by making a call to am_path(); and
- they ask write_file() to die() upon failure.
The slight differences among the call sites throw them into roughly
three categories:
- many write either "t" or "f" based on a boolean value to a file;
- some write the integer value in decimal text;
- some others write more general string, e.g. an object name in
hex, an empty string (i.e. the presense of the file itself serves
as a flag), etc.
Introduce three helpers, write_state_bool(), write_state_count() and
write_state_text(), to reduce direct calls to write_file().
This is a preparatory step for the next step to ensure that no
"state" file this command leaves in $GIT_DIR is with an incomplete
line at the end.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rev-list command does not have the internal
infrastructure to display notes. Running:
git rev-list --notes HEAD
will silently ignore the "--notes" option. Running:
git rev-list --notes --grep=. HEAD
will crash on an assert. Running:
git rev-list --format=%N HEAD
will place a literal "%N" in the output (it does not even
expand to an empty string).
Let's have rev-list tell the user that it cannot fill the
user's request, rather than silently producing wrong data.
Likewise, let's remove mention of the notes options from the
rev-list documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We defaulted to ignoring merge diffs because long long ago, in a
galaxy far away, we didn't have a great way to show the diffs. The
whole "--cc" option goes back to January '06 and commit d8f4790e6f
("diff-tree --cc: denser combined diff output for a merge commit").
And before that option - so for about 8 months - we had no good way
to show the diffs of merges in a good dense way. So the whole
"don't show diffs for merges by default" actually made a lot of
sense originally, because our merge diffs were not very useful.
And this was carried forward to this day. "git log --cc" still
ignores merge commits, and you need to say "git log -m --cc" to view
a sensible rendition of merge and non-merge commits, even with the
previous change to make "--cc" imply "-p".
Teach "git log" that "--cc" means the user wants to see interesting
changes in merge commits by turning "-m" on.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "--cc" option to "git log" is clearly a request to show some
sort of combined diff (be it --patch or --raw), but traditionally
we required the command line to explicitly ask for "git log -p --cc".
Teach the command line parser to treat a lone "--cc" as if the user
specified "-p --cc". Formats that do ask for other forms of diff
output, e.g. "log --raw --cc", are not overriden.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The revision walking API allows the callers to tweak its
configuration at the last minute, immediately after all the revision
and pathspec parameters are parsed from the command line but before
the default actions are decided based on them, by defining a "tweak"
callback function when calling setup_revisions(). Traditionally,
this facility was used by "git show" to turn on the patch output
"-p" by default when no diff output option (e.g. "--raw" or "-s" to
squelch the output altogether) is given on the command line, and
further give dense combined diffs "--cc" for merge commits when no
option to countermand it (e.g. "-m" to show pairwise patches).
Recently, "git log" started using the same facility, but we named
the callback function "default_follow_tweak()", as if the only kind
of tweaking we would want for "git log" will forever be limited to
turning "--follow" on by default when told by a configuration
variable. That was myopic.
Rename it to more generic name "log_setup_revisions_tweak()", and
match the one used by show "show_setup_revisions_tweak()".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We create a strbuf only to insert a single string, pass the
resulting buffer to a function (which does not modify the
string), and then free it. We can just pass the original
string instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When formatting a config value into a strbuf, we may end
up stringifying it into a fixed-size buffer using sprintf,
and then copying that buffer into the strbuf. We can
eliminate the middle-man (and drop some calls to sprintf!)
by writing directly to the strbuf.
The reason it was written this way in the first place is
that we need to know before writing the value whether to
insert a delimiter. Instead of delaying the write of the
value, we speculatively write the delimiter, and roll it
back in the single case that cares.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's unusual for a function which writes to a passed-in
strbuf to call strbuf_init; that will throw away anything
already there, leaking memory. In this case, there are
exactly two callers; one relies on this initialization and
the other passes in an already-initialized buffer.
There's no leak, as the initialized buffer doesn't have
anything in it. But let's bump the strbuf_init out to the
one caller who needs it, making format_config more
idiomatic.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 578625fa91 (config: add '--name-only' option to list only
variable names, 2015-08-10) modified format_config() such that it
returned from the middle of the function when showing only keys,
resulting in ugly code structure.
Reorganize the if statements and dealing with the key-value delimiter to
make the function easier to read.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though multiplication is commutative, the order of arguments
should be xcalloc(nmemb, size). ps_matched is an array of 1-byte
element whose size is the same as the number of pathspec elements.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_path() and mkpath() are handy helper functions but it is easy
to misuse, as the callers need to be careful to keep the number of
active results below 4. Their uses have been reduced.
* jk/git-path:
memoize common git-path "constant" files
get_repo_path: refactor path-allocation
find_hook: keep our own static buffer
refs.c: remove_empty_directories can take a strbuf
refs.c: avoid git_path assignment in lock_ref_sha1_basic
refs.c: avoid repeated git_path calls in rename_tmp_log
refs.c: simplify strbufs in reflog setup and writing
path.c: drop git_path_submodule
refs.c: remove extra git_path calls from read_loose_refs
remote.c: drop extraneous local variable from migrate_file
prefer mkpathdup to mkpath in assignments
prefer git_pathdup to git_path in some possibly-dangerous cases
add_to_alternates_file: don't add duplicate entries
t5700: modernize style
cache.h: complete set of git_path_submodule helpers
cache.h: clarify documentation for git_path, et al
"git clone $URL", when cloning from a site whose sole purpose is to
host a single repository (hence, no path after <scheme>://<site>/),
tried to use the site name as the new repository name, but did not
remove username or password when <site> part was of the form
<user>@<pass>:<host>. The code is taught to redact these.
* ps/guess-repo-name-at-root:
clone: abort if no dir name could be guessed
clone: do not use port number as dir name
clone: do not include authentication data in guessed dir
"git clone $URL" in recent releases of Git contains a regression in
the code that invents a new repository name incorrectly based on
the $URL. This has been corrected.
* jk/guess-repo-name-regression-fix:
clone: use computed length in guess_dir_name
clone: add tests for output directory
The "rev-parse --parseopt" mode parsed the option specification
and the argument hint in a strange way to allow '=' and other
special characters in the option name while forbidding them from
the argument hint. This made it impossible to define an option
like "--pair <key>=<value>" with "pair=key=value" specification,
which instead would have defined a "--pair=key <value>" option.
* ib/scripted-parse-opt-better-hint-string:
rev-parse --parseopt: allow [*=?!] in argument hints
The low-level "git send-pack" did not honor 'user.signingkey'
configuration variable when sending a signed-push.
* db/send-pack-user-signingkey:
builtin/send-pack.c: respect user.signingkey
An attempt to delete a ref by pushing into a repositorywhose HEAD
symbolic reference points at an unborn branch that cannot be
created due to ref D/F conflict (e.g. refs/heads/a/b exists, HEAD
points at refs/heads/a) failed.
* jx/do-not-crash-receive-pack-wo-head:
receive-pack: crash when checking with non-exist HEAD
Add a new flag --sign=true (or --sign=false), which means the same
thing as the original --signed (or --no-signed). Give it a third
value --sign=if-asked to tell push and send-pack to send a push
certificate if and only if the server advertised a push cert nonce.
If not, warn the user that their push may not be as secure as they
thought.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old option parsing code in this plumbing command predates this
API, so option parsing was done more manually. Using the new API
brings send-pack more in line with push, and accepts new variants
like --no-* for negating options.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* hv/submodule-config:
submodule: allow erroneous values for the fetchRecurseSubmodules option
submodule: use new config API for worktree configurations
submodule: extract functions for config set and lookup
submodule: implement a config API for lookup of .gitmodules values
We should not die when reading the submodule config cache since the
user might not be able to get out of that situation when the
configuration is part of the history.
We should handle this condition later when the value is about to be
used.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We remove the extracted functions and directly parse into and read out
of the cache. This allows us to have one unified way of accessing
submodule configuration values specific to single submodules. Regardless
whether we need to access a configuration from history or from the
worktree.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running "git am --abort", and then running "git reset --hard",
files that were not modified would still be re-checked out.
This is because clean_index() in builtin/am.c mistakenly called the
read_tree() function, which overwrites all entries in the index,
including the stat info.
"git am --skip" did not seem to have this issue because am_skip() called
am_run(), which called refresh_cache() to update the stat info. However,
there's still a performance penalty as the lack of stat info meant that
refresh_cache() would have to scan all files for changes.
Fix this by using unpack_trees() instead to merge the tree into the
index, so that the stat info from the index is kept.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach notes about a new "notes.<name>.mergeStrategy" option for
configuring the notes merge strategy when merging into
refs/notes/<name>. This option allows for the selection of merge
strategy for particular notes refs, rather than all notes ref merges, as
user may not want cat_sort_uniq for all refs, but only some. Note that
the <name> is the local reference we are merging into, not the remote
ref we merged from. The assumption is that users will mostly want to
configure separate local ref merge strategies rather than strategies
depending on which remote ref they merge from.
notes.<name>.mergeStrategy overrides the general behavior as it is more
specific.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-notes about "notes.mergeStrategy" to select a general strategy
for all notes merges. This enables a user to always get expected merge
strategy such as "cat_sort_uniq" without having to pass the "-s" option
manually.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An off-by-one error made "git remote" to mishandle a remote with a
single letter nickname.
* mh/get-remote-group-fix:
get_remote_group(): use skip_prefix()
get_remote_group(): eliminate superfluous call to strcspn()
get_remote_group(): rename local variable "space" to "wordlen"
get_remote_group(): handle remotes with single-character names
"git pull --rebase" has been taught to pay attention to
rebase.autostash configuration.
* kd/pull-rebase-autostash:
pull: allow dirty tree when rebase.autostash enabled
The hook to report "garbage" files in $GIT_OBJECT_DIRECTORY/pack/
could be generic but is too specific to count-object's needs.
Move the part to produce human-readable messages to count-objects,
and refine the interface to callback with the "bits" with values
defined in the cache.h header file, so that other callers (e.g.
prune) can later use the same mechanism to enumerate different
kinds of garbage files and do something intelligent about them,
other than reporting in textual messages.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "new-worktree-mode" hack in "checkout" that was added in
nd/multiple-work-trees topic has been removed by updating the
implementation of new "worktree add".
* es/worktree-add-cleanup: (25 commits)
Documentation/git-worktree: fix duplicated 'from'
Documentation/config: mention "now" and "never" for 'expire' settings
Documentation/git-worktree: fix broken 'linkgit' invocation
checkout: drop intimate knowledge of newly created worktree
worktree: populate via "git reset --hard" rather than "git checkout"
worktree: avoid resolving HEAD unnecessarily
worktree: make setup of new HEAD distinct from worktree population
worktree: detect branch-name/detached and error conditions locally
worktree: add_worktree: construct worktree-population command locally
worktree: elucidate environment variables intended for child processes
worktree: make branch creation distinct from worktree population
worktree: add: suppress auto-vivication with --detach and no <branch>
worktree: make --detach mutually exclusive with -b/-B
worktree: introduce options container
worktree: simplify new branch (-b/-B) option checking
worktree: improve worktree setup message
branch: publish die_if_checked_out()
checkout: teach check_linked_checkout() about symbolic link HEAD
checkout: check_linked_checkout: simplify symref parsing
checkout: check_linked_checkout: improve "already checked out" aesthetic
...
Remove remaining cruft from "git checkout --to", which
transitioned to "git worktree add".
* es/worktree-add:
config: rename "gc.pruneWorktreesExpire" to "gc.worktreePruneExpire"
Documentation/git-worktree: wordsmith worktree-related manpages
Documentation/config: fix stale "git prune --worktree" reference
Documentation/git-worktree: fix incorrect reference to file "locked"
Documentation/git-worktree: consistently use term "linked working tree"
After resolving a conflicting patch, a user may wish to sign off the
patch to declare that the patch has been modified. As such, the user
will expect that running "git am --signoff --continue" will append the
signoff to the commit message.
However, the --signoff option is only taken into account during the
mail-parsing stage. If the --signoff option is set, then the signoff
will be appended to the commit message. Since the mail-parsing stage
comes before the patch application stage, the --signoff option, if
provided on the command-line when resuming, will have no effect at all.
We cannot move the append_signoff() call to the patch application stage
as the applypatch-msg hook and interactive mode, which run before patch
application, may expect the signoff to be there.
Fix this by taking note if the user explictly set the --signoff option
on the command-line, and append the signoff to the commit message when
resuming if so.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When resuming, git-am mistakenly ignores command-line options.
For instance, when a patch fails to apply with "git am patch",
subsequently running "git am --3way" would not cause git-am to fall
back on attempting a threeway merge. This occurs because by default
the --3way option is saved as "false", and the saved am options are
loaded after the command-line options are parsed, thus overwriting
the command-line options when resuming.
Fix this by moving the am_load() function call before parse_options(),
so that command-line options will override the saved am options.
The purpose of supporting this use case is to enable users to "wiggle"
that one conflicting patch. As such, it is expected that the
command-line options do not affect subsequent applied patches. Implement
this by calling am_load() once we apply the conflicting patch
successfully.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before creating NOTES_MERGE_REF, check NOTES_MERGE_REF using
find_shared_symref and die if we find one. This prevents simultaneous
merges to the same notes branch from different worktrees.
Signed-off-by: David Turner <dturner@twopensource.com>
Reviewed-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the most common uses of git_path() is to pass a
constant, like git_path("MERGE_MSG"). This has two
drawbacks:
1. The return value is a static buffer, and the lifetime
is dependent on other calls to git_path, etc.
2. There's no compile-time checking of the pathname. This
is OK for a one-off (after all, we have to spell it
correctly at least once), but many of these constant
strings appear throughout the code.
This patch introduces a series of functions to "memoize"
these strings, which are essentially globals for the
lifetime of the program. We compute the value once, take
ownership of the buffer, and return the cached value for
subsequent calls. cache.h provides a helper macro for
defining these functions as one-liners, and defines a few
common ones for global use.
Using a macro is a little bit gross, but it does nicely
document the purpose of the functions. If we need to touch
them all later (e.g., because we learned how to change the
git_dir variable at runtime, and need to invalidate all of
the stored values), it will be much easier to have the
complete list.
Note that the shared-global functions have separate, manual
declarations. We could do something clever with the macros
(e.g., expand it to a declaration in some places, and a
declaration _and_ a definition in path.c). But there aren't
that many, and it's probably better to stay away from
too-magical macros.
Likewise, if we abandon the C preprocessor in favor of
generating these with a script, we could get much fancier.
E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz".
But the small amount of saved typing is probably not worth
the resulting confusion to readers who want to grep for the
function's definition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_repo_path function calls mkpath() and then does some
non-trivial operations on it, like calling
is_git_directory() and read_gitfile(). These are actually
OK (they do not use more pathname static buffers
themselves), but it takes a fair bit of work to verify.
Let's use our own strbuf to store the path, and we can
simply reuse it for each iteration of the loop (we can even
avoid rewriting the beginning part, since we are trying a
series of suffixes).
To make the strbuf cleanup easier, we split out a thin
wrapper. As a bonus, this wrapper can factor out the
canonicalization that happens in all of the early-return
code paths.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's an anti-pattern to assign the result of git_path to a
variable, since other calls may reuse our buffer. In this
case, we feed the result to unlink_or_warn immediately
afterwards, so it's OK. However, it's nice to avoid
assignment entirely, which makes it more obvious that
there's no bug.
We can just pass the result directly to unlink_or_warn,
which is a known-simple function. As a bonus, the code flow
is a little more obvious, as we eliminate an extra
conditional (a reader does not have to wonder any more
"under which circumstances is 'path' set?").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with the previous commit to git_path, assigning the
result of mkpath is suspicious, since it is not clear
whether we will still depend on the value after it may have
been overwritten by subsequent calls. This patch converts
low-hanging fruit to use mkpathdup instead of mkpath (with
the downside that we must remember to free the result).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because git_path uses a static buffer that is shared with
calls to git_path, mkpath, etc, it can be dangerous to
assign the result to a variable or pass it to a non-trivial
function. The value may change unexpectedly due to other
calls.
None of the cases changed here has a known bug, but they're
worth converting away from git_path because:
1. It's easy to use git_pathdup in these cases.
2. They use constructs (like assignment) that make it
hard to tell whether they're safe or not.
The extra malloc overhead should be trivial, as an
allocation should be an order of magnitude cheaper than a
system call (which we are clearly about to make, since we
are constructing a filename). The real cost is that we must
remember to free the result.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5a688fe4 ("core.sharedrepository = 0mode" should set, not
loosen, 2009-03-25), we kept reminding ourselves:
NEEDSWORK: this should be renamed to finalize_temp_file() as
"moving" is only a part of what it does, when no patch between
master to pu changes the call sites of this function.
without doing anything about it. Let's do so.
The purpose of this function was not to move but to finalize. The
detail of the primarily implementation of finalizing was to link the
temporary file to its final name and then to unlink, which wasn't
even "moving". The alternative implementation did "move" by calling
rename(2), which is a fun tangent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to various components of the URI being stripped off it may
happen that we fail to guess a directory name. We currently error
out with a message that it is impossible to create the working
tree '' in such cases. Instead, error out early with a sensible
error message hinting that a directory name should be specified
manually on the command line.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the URI contains a port number and the URI's path component is
empty we fail to guess a sensible directory name. E.g. cloning a
repository 'ssh://example.com:2222/' we guess a directory name
'2222' where we would want the hostname only, e.g. 'example.com'.
We need to take care to not drop trailing port-like numbers in
certain cases. E.g. when cloning a repository 'foo/bar:2222.git'
we want to guess the directory name '2222' instead of 'bar'.
Thus, we have to first check the stripped URI for path separators
and only strip port numbers if there are path separators present.
This heuristic breaks when cloning a repository 'bar:2222.git',
though.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the URI contains authentication data and the URI's path
component is empty, we fail to guess a sensible directory name.
E.g. cloning a repository 'ssh://user:password@example.com/' we
guess a directory name 'password@example.com' where we would want
the hostname only, e.g. 'example.com'.
The naive way of just adding '@' as a path separator would break
cloning repositories like 'foo/bar@baz.git' (which would
currently become 'bar@baz' but would then become 'baz' only).
Instead fix this by first dropping the scheme and then greedily
scanning for an '@' sign until we find the first path separator.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7e837c6 (clone: simplify string handling in
guess_dir_name(), 2015-07-09) changed clone to use
strip_suffix instead of hand-rolled pointer manipulation.
However, strip_suffix will strip from the end of a
NUL-terminated string, and we may have already stripped some
characters (like directory separators, or "/.git"). This
leads to commands like:
git clone host:foo.git/
failing to strip the ".git".
We must instead convert our pointer arithmetic into a
computed length and feed that to strip_suffix_mem, which will
then reduce the length further for us.
It would be nicer if we could drop the pointer manipulation
entirely, and just continually strip using strip_suffix. But
that doesn't quite work for two reasons:
1. The early suffixes we're stripping are not constant; we
need to look for is_dir_sep, which could be one of
several characters.
2. Mid-way through the stripping we compute the pointer
"start", which shows us the beginning of the pathname.
Which really give us two lengths to work with: the
offset from the start of the string, and from the start
of the path. By using pointers for the early part, we
can just compute the length from "start" when we need
it.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git config' can only show values or name-value pairs, so if a shell
script needs the names of set config variables it has to run 'git config
--list' or '--get-regexp' and parse the output to separate config
variable names from their values. However, such a parsing can't cope
with multi-line values. Though 'git config' can produce null-terminated
output for newline-safe parsing, that's of no use in such a case, becase
shells can't cope with null characters.
Even our own bash completion script suffers from these issues.
Help the completion script, and shell scripts in general, by introducing
the '--name-only' option to modify the output of '--list' and
'--get-regexp' to list only the names of config variables, so they don't
have to perform error-prone post processing to separate variable names
from their values anymore.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the am.threeWay configuration variable to use the -3 or --3way
option of git am by default. When am.threeway is set and not desired
for a specific git am command, the --no-3way option can be used to
override it.
Signed-off-by: Remi Lespinet <remi.lespinet@ensimag.grenoble-inp.fr>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the beginning of the rewrite of git-am.sh to C, in order to not break
existing test scripts that depended on a functional git-am, a
redirection to git-am.sh was introduced that would activate if the
environment variable _GIT_USE_BUILTIN_AM was not defined.
Now that all of git-am.sh's functionality has been re-implemented in
builtin/am.c, remove this redirection, and retire git-am.sh into
contrib/examples/.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit_tree() is called, if the user does not have an explicit
committer ident configured, it will attempt to construct a default
committer ident based on the user's and system's info (e.g. gecos field,
hostname etc.) However, if a default committer ident is unable to be
constructed, commit_tree() will die(), but at this point of git-am's
execution, there will already be changes made to the index and work
tree.
This can be confusing to new users, and as such since d64e6b0 (Keep
Porcelainish from failing by broken ident after making changes.,
2006-02-18) git-am.sh will check to see if the committer ident has been
configured, or a default one can be constructed, before even starting to
apply patches.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -b/--binary option was initially implemented in 087b674 (git-am:
--binary; document --resume and --binary., 2005-11-16). The option will
pass the --binary flag to git-apply to allow it to apply binary patches.
However, in 2b6eef9 (Make apply --binary a no-op., 2006-09-06), --binary
was been made a no-op in git-apply. Following that, since cb3a160
(git-am: ignore --binary option, 2008-08-09), the --binary option in
git-am is ignored as well.
In 6c15a1c (am: officially deprecate -b/--binary option, 2012-03-13),
the --binary option was tweaked to its present behavior: when set, the
message:
The -b/--binary option has been a no-op for long time, and it
will be removed. Please do not use it anymore.
will be printed.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh supported the --interactive mode. After parsing the patch mail
and extracting the patch, commit message and authorship info, an
interactive session will begin that allows the user to choose between:
* applying the patch
* applying the patch and all subsequent patches (by disabling
interactive mode in subsequent patches)
* skipping the patch
* editing the commit message
Since f89ad67 (Add [v]iew patch in git-am interactive., 2005-10-25),
git-am.sh --interactive also supported viewing the patch to be applied.
When --resolved-ing in --interactive mode, we need to take care to
update the patch with the contents of the index, such that the correct
patch will be displayed when the patch is viewed in interactive mode.
Re-implement the above in builtin/am.c
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 0cfd112 (am: preliminary support for hg patches, 2011-08-29),
git-am.sh could convert mercurial patches to an RFC2822 mail patch
suitable for parsing with git-mailinfo, and queue them in the state
directory for application.
Since 15ced75 (git-am foreign patch support: autodetect some patch
formats, 2009-05-27), git-am.sh was able to auto-detect mercurial
patches by checking if the file begins with the line:
# HG changeset patch
Re-implement the above in builtin/am.c.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c574e68 (git-am foreign patch support: StGIT support, 2009-05-27),
git-am.sh is able to read a single StGit series file and, for each StGit
patch listed in the file, convert the StGit patch into a RFC2822 mail
patch suitable for parsing with git-mailinfo, and queue them in the
state directory for applying.
Since 15ced75 (git-am foreign patch support: autodetect some patch
formats, 2009-05-27), git-am.sh is able to auto-detect StGit series
files by checking to see if the file starts with the string:
# This series applies on GIT commit
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c574e68 (git-am foreign patch support: StGIT support, 2009-05-27),
git-am.sh supported converting StGit patches into RFC2822 mail patches
that can be parsed with git-mailinfo.
Implement this by introducing two functions in builtin/am.c:
stgit_patch_to_mail() and split_mail_conv().
stgit_patch_to_mail() is a callback function for split_mail_conv(), and
contains the logic for converting an StGit patch into an RFC2822 mail
patch.
split_mail_conv() implements the logic to go through each file in the
`paths` list, reading from stdin where specified, and calls the callback
function to write the converted patch to the corresponding output file
in the state directory. This interface should be generic enough to
support other foreign patch formats in the future.
Since 15ced75 (git-am foreign patch support: autodetect some patch
formats, 2009-05-27), git-am.sh is able to auto-detect StGit patches.
Re-implement this in builtin/am.c.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am.sh will call git-rerere at the following events:
* "git rerere" when a three-way merge fails to record the conflicted
automerge results. Since 8389b52 (git-rerere: reuse recorded resolve.,
2006-01-28)
* Since cb6020b (Teach --[no-]rerere-autoupdate option to merge,
revert and friends, 2009-12-04), git-am.sh supports the
--[no-]rerere-autoupdate option as well, and would pass it to
git-rerere.
* "git rerere" when --resolved, to record the hand resolution. Since
f131dd4 (rerere: record (or avoid misrecording) resolved, skipped or
aborted rebase/am, 2006-12-08)
* "git rerere clear" when --skip-ing. Since f131dd4 (rerere: record (or
avoid misrecording) resolved, skipped or aborted rebase/am,
2006-12-08)
* "git rerere clear" when --abort-ing. Since 3e5057a (git am --abort,
2008-07-16)
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh will invoke the post-applypatch hook after the patch is
applied and a commit is made. The exit code of the hook is ignored.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sg will invoke the pre-applypatch hook after applying the patch
to the index, but before a commit is made. Should the hook exit with a
non-zero status, git am will exit.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh will invoke the applypatch-msg hooks just after extracting the
patch message. If the applypatch-msg hook exits with a non-zero status,
git-am.sh abort before even applying the patch to the index.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since eb2151b (rebase: support automatic notes copying, 2010-03-12),
git-am.sh supported automatic notes copying in --rebasing mode by
invoking "git notes copy" once it has finished applying all the patches.
Re-implement this feature in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 96e1948 (rebase: invoke post-rewrite hook, 2010-03-12), git-am.sh
will invoke the post-rewrite hook after it successfully finishes
applying all the queued patches.
To do this, when parsing a mail to extract its patch and metadata, in
--rebasing mode git-am.sh will also store the original commit ID in the
$state_dir/original-commit file. Once it applies and commits the patch,
the original commit ID, and the new commit ID, will be appended to the
$state_dir/rewritten file.
Once all of the queued mail have been processed, git-am.sh will then
invoke the post-rewrite hook with the contents of the
$state_dir/rewritten file.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3b4e395 (am: add the --gpg-sign option, 2014-02-01), git-am.sh
supported the --gpg-sign option, and would pass it to git-commit-tree,
thus GPG-signing the commit object.
Re-implement this option in builtin/am.c.
git-commit-tree would also sign the commit by default if the
commit.gpgsign setting is true. Since we do not run commit-tree, we
re-implement this behavior by handling the commit.gpgsign setting
ourselves.
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3f01ad6 (am: Add --committer-date-is-author-date option,
2009-01-22), git-am.sh implemented the --committer-date-is-author-date
option, which tells git-am to use the timestamp recorded in the email
message as both author and committer date.
Re-implement this option in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since a79ec62 (git-am: Add --ignore-date option, 2009-01-24), git-am.sh
supported the --ignore-date option, and would use the current timestamp
instead of the one provided in the patch if the option was set.
Re-implement this option in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am.sh recognizes some of git-apply's options, and would pass them to
git-apply:
* --whitespace, since 8c31cb8 (git-am: --whitespace=x option.,
2006-02-28)
* -C, since 67dad68 (add -C[NUM] to git-am, 2007-02-08)
* -p, since 2092a1f (Teach git-am to pass -p option down to git-apply,
2007-02-11)
* --directory, since b47dfe9 (git-am: add --directory=<dir> option,
2009-01-11)
* --reject, since b80da42 (git-am: implement --reject option passed to
git-apply, 2009-01-23)
* --ignore-space-change, --ignore-whitespace, since 86c91f9 (git apply:
option to ignore whitespace differences, 2009-08-04)
* --exclude, since 77e9e49 (am: pass exclude down to apply, 2011-08-03)
* --include, since 58725ef (am: support --include option, 2012-03-28)
* --reject, since b80da42 (git-am: implement --reject option passed to
git-apply, 2009-01-23)
Re-implement support for these options in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 017678b (am/mailinfo: Disable scissors processing by default,
2009-08-26), git-am supported the --[no-]scissors option, passing it to
git-mailinfo.
Re-implement support for this option in builtin/am.c.
Since the default setting of --scissors in git-mailinfo can be
configured with mailinfo.scissors (and perhaps through other settings in
the future), to be safe we make an explicit distinction between
SCISSORS_UNSET, SCISSORS_TRUE and SCISSORS_FALSE.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ad2c928 (git-am: Add command line parameter `--keep-cr` passing it
to git-mailsplit, 2010-02-27), git-am.sh supported the --keep-cr option
and would pass it to git-mailsplit.
Since e80d4cb (git-am: Add am.keepcr and --no-keep-cr to override it,
2010-02-27), git-am.sh supported the am.keepcr config setting, which
controls whether --keep-cr is on by default.
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since a078f73 (git-am: add --message-id/--no-message-id, 2014-11-25),
git-am.sh supported the --[no-]message-id options, and the
"am.messageid" setting which specifies the default option.
--[no-]message-id tells git-am whether or not the -m option should be
passed to git-mailinfo.
Re-implement this option in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh supported the -k/--keep option to pass the -k option to
git-mailsplit.
Since f7e5ea1 (am: learn passing -b to mailinfo, 2012-01-16), git-am.sh
supported the --keep-non-patch option to pass the -b option to
git-mailsplit.
Re-implement these two options in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh supported the -u,--utf8 option. If set, the -u option will be
passed to git-mailinfo to re-code the commit log message and authorship
in the charset specified by i18n.commitencoding. If unset, the -n option
will be passed to git-mailinfo, which disables the re-encoding.
Since d84029b (--utf8 is now default for 'git-am', 2007-01-08), --utf8
is specified by default in git-am.sh.
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Should git-am terminate unexpectedly between the point where the state
directory is created, but the "next" and "last" files are not written
yet, a stray state directory will be left behind.
As such, since b141f3c (am: handle stray $dotest directory, 2013-06-15),
git-am.sh explicitly recognizes such a stray directory, and allows the
user to remove it with am --abort.
Re-implement this feature in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5e835ca (rebase: do not munge commit log message, 2008-04-16),
git am --rebasing no longer gets the commit log message from the patch,
but reads it directly from the commit identified by the "From " header
line.
Since 43c2325 (am: use get_author_ident_from_commit instead of mailinfo
when rebasing, 2010-06-16), git am --rebasing also gets the author name,
email and date directly from the commit.
Since 0fbb95d (am: don't call mailinfo if $rebasing, 2012-06-26), git am
--rebasing does not use git-mailinfo to get the patch body, but rather
generates it directly from the commit itself.
The above 3 commits introduced a separate parse_mail() code path in
git-am.sh's --rebasing mode that bypasses git-mailinfo. Re-implement
this code path in builtin/am.c as parse_mail_rebase().
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3041c32 (am: --rebasing, 2008-03-04), git-am.sh supported the
--rebasing option, which is used internally by git-rebase to tell git-am
that it is being used for its purpose. It would create the empty file
$state_dir/rebasing to help "completion" scripts tell if the ongoing
operation is am or rebase.
As of 0fbb95d (am: don't call mailinfo if $rebasing, 2012-06-26),
--rebasing also implies --3way as well.
Since a1549e1 (am: return control to caller, for housekeeping,
2013-05-12), git-am.sh would only clean up the state directory when it
is not --rebasing, instead deferring cleanup to git-rebase.sh.
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07),
git-am.sh supported the --3way option, and if set, would attempt to do a
3-way merge if the initial patch application fails.
Since 5d86861 (am -3: list the paths that needed 3-way fallback,
2012-03-28), in a 3-way merge git-am.sh would list the paths that needed
3-way fallback, so that the user can review them more carefully to spot
mismerges.
Re-implement the above in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
supported the --signoff option which will append a signoff at the end of
the commit messsage. Re-implement this feature in parse_mail() by
calling append_signoff() if the option is set.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since ced9456 (Give the user a hint for how to continue in the case that
git-am fails because it requires user intervention, 2006-05-02), git-am
prints additional information on how the user can re-invoke git-am to
resume patch application after resolving the failure. Re-implement this
through the die_user_resolve() function.
Since cc12005 (Make git rebase interactive help match documentation.,
2006-05-13), git-am supports the --resolvemsg option which is used by
git-rebase to override the message printed out when git-am fails.
Re-implement this option.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 0e987a1 (am, rebase: teach quiet option, 2009-06-16), git-am
supported the --quiet option, and when told to be quiet, would only
speak on failure. Re-implement this by introducing the say() function,
which works like fprintf_ln(), but would only write to the stream when
state->quiet is false.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
would error out if the user gave it mbox(s) on the command-line, but
there was a session in progress.
Since c95b138 (Fix git-am safety checks, 2006-09-15), git-am would
detect if the user attempted to feed it a mbox via stdin, by checking if
stdin is not a tty and there is no resume command given.
Re-implement the above two safety checks.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 3e5057a (git am --abort, 2008-07-16), git-am supported the --abort
option that will rewind HEAD back to the original commit. Re-implement
this through am_abort().
Since 7b3b7e3 (am --abort: keep unrelated commits since the last failure
and warn, 2010-12-21), to prevent commits made since the last failure
from being lost, git-am will not rewind HEAD back to the original
commit if HEAD moved since the last failure. Re-implement this through
safe_to_abort().
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
supported resuming from a failed patch application by skipping the
current patch. Re-implement this feature by introducing am_skip().
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 271440e (git-am: make it easier after fixing up an unapplicable
patch., 2005-10-25), when "git am" is run again after being paused, the
current mail message will not be re-parsed, but instead the contents of
the state directory's patch, msg and author-script files will be used
as-is instead.
Re-implement this in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 0c15cc9 (git-am: --resolved., 2005-11-16), git-am supported
resuming from a failed patch application. The user will manually apply
the patch, and the run git am --resolved which will then commit the
resulting index. Re-implement this feature by introducing am_resolve().
Since it makes no sense for the user to run am --resolved when there is
no session in progress, we error out in this case.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d1c5f2a (Add git-am, applymbox replacement., 2005-10-07), git-am
will refuse to apply patches if the index is dirty. Re-implement this
behavior in builtin/am.c.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement do_commit(), which commits the index which contains the
results of applying the patch, along with the extracted commit message
and authorship information.
Since 29b6754 (am: remove rebase-apply directory before gc, 2010-02-22),
git gc --auto is also invoked to pack the loose objects that are created
from making the commits.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement applying the patch to the index using git-apply.
If a file is unchanged but stat-dirty, git-apply may erroneously fail to
apply patches, thinking that they conflict with a dirty working tree.
As such, since 2a6f08a (am: refresh the index at start and --resolved,
2011-08-15), git-am will refresh the index before applying patches.
Re-implement this behavior.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of applying the patch and committing the results,
implement extracting the patch data, commit message and authorship from
an e-mail message using git-mailinfo.
git-mailinfo is run as a separate process, but ideally in the future,
we should be be able to access its functionality directly without
spawning a new process.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 15ced75 (git-am foreign patch support: autodetect some patch
formats, 2009-05-27), git-am.sh is able to autodetect mbox, stgit and
mercurial patches through heuristics.
Re-implement support for autodetecting mbox/maildir files in
builtin/am.c.
RFC 2822 requires that lines are terminated by "\r\n". To support this,
implement strbuf_getline_crlf(), which will remove both '\n' and "\r\n"
from the end of the line.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am.sh supports mbox, stgit and mercurial patches. Re-implement
support for splitting out mbox/maildirs using git-mailsplit, while also
implementing the framework required to support other patch formats in
the future.
Re-implement support for the --patch-format option (since a5a6755
(git-am foreign patch support: introduce patch_format, 2009-05-27)) to
allow the user to choose between the different patch formats.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am applies a series of patches. If the process terminates
abnormally, we want to be able to resume applying the series of patches.
This requires the session state to be saved in a persistent location.
Implement the mechanism of a "patch queue", represented by 2 integers --
the index of the current patch we are applying and the index of the last
patch, as well as its lifecycle through the following functions:
* am_setup(), which will set up the state directory
$GIT_DIR/rebase-apply. As such, even if the process exits abnormally,
the last-known state will still persist.
* am_load(), which is called if there is an am session in
progress, to load the last known state from the state directory so we
can resume applying patches.
* am_run(), which will do the actual patch application. After applying a
patch, it calls am_next() to increment the current patch index. The
logic for applying and committing a patch is not implemented yet.
* am_destroy(), which is finally called when we successfully applied all
the patches in the queue, to clean up by removing the state directory
and its contents.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of rewriting git-am.sh into a C builtin, implement a
skeletal builtin/am.c that redirects to $GIT_EXEC_PATH/git-am if the
environment variable _GIT_USE_BUILTIN_AM is not defined. Since in the
Makefile git-am.sh takes precedence over builtin/am.c,
$GIT_EXEC_PATH/git-am will contain the shell script git-am.sh, and thus
this allows us to fall back on the functional git-am.sh when running the
test suite for tests that depend on a working git-am implementation.
Since git-am.sh cannot handle any environment modifications by
setup_git_directory(), "am" is declared with no setup flags in git.c. On
the other hand, to re-implement git-am.sh in builtin/am.c, we need to
run all the git dir and work tree setup logic that git.c typically does
for us. As such, we work around this temporarily by copying the logic in
git.c's run_builtin(), which is roughly:
prefix = setup_git_directory();
trace_repo_setup(prefix);
setup_work_tree();
This redirection should be removed when all the features of git-am.sh
have been re-implemented in builtin/am.c.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An attempt to delete a ref by pushing into a repositorywhose HEAD
symbolic reference points at an unborn branch that cannot be
created due to ref D/F conflict (e.g. refs/heads/a/b exists, HEAD
points at refs/heads/a) failed.
* jx/do-not-crash-receive-pack-wo-head:
receive-pack: crash when checking with non-exist HEAD
The low-level "git send-pack" did not honor 'user.signingkey'
configuration variable when sending a signed-push.
* db/send-pack-user-signingkey:
builtin/send-pack.c: respect user.signingkey
In preparation for allowing different "backends" to store the refs
in a way different from the traditional "one ref per file in $GIT_DIR
or in a $GIT_DIR/packed-refs file" filesystem storage, reduce
direct filesystem access to ref-like things like CHERRY_PICK_HEAD
from scripts and programs.
* dt/refs-backend-preamble:
git-stash: use update-ref --create-reflog instead of creating files
update-ref and tag: add --create-reflog arg
refs: add REF_FORCE_CREATE_REFLOG flag
git-reflog: add exists command
refs: new public ref function: safe_create_reflog
refs: break out check for reflog autocreation
refs.c: add err arguments to reflog functions
Teach "git log" and friends a new "--date=format:..." option to
format timestamps using system's strftime(3).
* jk/date-mode-format:
strbuf: make strbuf_addftime more robust
introduce "format" date-mode
convert "enum date_mode" into a struct
show-branch: use DATE_RELATIVE instead of magic number
The "rev-parse --parseopt" mode parsed the option specification
and the argument hint in a strange way to allow '=' and other
special characters in the option name while forbidding them from
the argument hint. This made it impossible to define an option
like "--pair <key>=<value>" with "pair=key=value" specification,
which instead would have defined a "--pair=key <value>" option.
* ib/scripted-parse-opt-better-hint-string:
rev-parse --parseopt: allow [*=?!] in argument hints
Add a new configuration variable to enable "--follow" automatically
when "git log" is run with one pathspec argument.
* dt/log-follow-config:
log: add "log.follow" configuration variable
"cat-file" learned "--batch-all-objects" option to enumerate all
available objects in the repository more quickly than "rev-list
--all --objects" (the output includes unreachable objects, though).
* jk/cat-file-batch-all:
cat-file: sort and de-dup output of --batch-all-objects
cat-file: add --batch-all-objects option
cat-file: split batch_one_object into two stages
cat-file: stop returning value from batch_one_object
cat-file: add --buffer option
cat-file: move batch_options definition to top of file
cat-file: minor style fix in options list
Allow ignoring fsck errors on specific set of known-to-be-bad
objects, and also tweaking warning level of various kinds of non
critical breakages reported.
* js/fsck-opt:
fsck: support ignoring objects in `git fsck` via fsck.skiplist
fsck: git receive-pack: support excluding objects from fsck'ing
fsck: introduce `git fsck --connectivity-only`
fsck: support demoting errors to warnings
fsck: document the new receive.fsck.<msg-id> options
fsck: allow upgrading fsck warnings to errors
fsck: optionally ignore specific fsck issues completely
fsck: disallow demoting grave fsck errors to warnings
fsck: add a simple test for receive.fsck.<msg-id>
fsck: make fsck_tag() warn-friendly
fsck: handle multiple authors in commits specially
fsck: make fsck_commit() warn-friendly
fsck: make fsck_ident() warn-friendly
fsck: report the ID of the error/warning
fsck (receive-pack): allow demoting errors to warnings
fsck: offer a function to demote fsck errors to warnings
fsck: provide a function to parse fsck message IDs
fsck: introduce identifiers for fsck messages
fsck: introduce fsck options
Clean up refs API and make "git clone" less intimate with the
implementation detail.
* mh/init-delete-refs-api:
delete_ref(): use the usual convention for old_sha1
cmd_update_ref(): make logic more straightforward
update_ref(): don't read old reference value before delete
check_branch_commit(): make first parameter const
refs.h: add some parameter names to function declarations
refs: move the remaining ref module declarations to refs.h
initial_ref_transaction_commit(): check for ref D/F conflicts
initial_ref_transaction_commit(): check for duplicate refs
refs: remove some functions from the module's public interface
initial_ref_transaction_commit(): function for initial ref creation
repack_without_refs(): make function private
prune_refs(): use delete_refs()
prune_remote(): use delete_refs()
delete_refs(): bail early if the packed-refs file cannot be rewritten
delete_refs(): make error message more generic
delete_refs(): new function for the refs API
delete_ref(): handle special case more explicitly
remove_branches(): remove temporary
delete_ref(): move declaration to refs.h
Reimplement 'git pull' in C.
* pt/pull-builtin:
pull: remove redirection to git-pull.sh
pull --rebase: error on no merge candidate cases
pull --rebase: exit early when the working directory is dirty
pull: configure --rebase via branch.<name>.rebase or pull.rebase
pull: teach git pull about --rebase
pull: set reflog message
pull: implement pulling into an unborn branch
pull: fast-forward working tree if head is updated
pull: check if in unresolved merge state
pull: support pull.ff config
pull: error on no merge candidates
pull: pass git-fetch's options to git-fetch
pull: pass git-merge's options to git-merge
pull: pass verbosity, --progress flags to fetch and merge
pull: implement fetch + merge
pull: implement skeletal builtin pull
argv-array: implement argv_array_pushv()
parse-options-cb: implement parse_opt_passthru_argv()
parse-options-cb: implement parse_opt_passthru()
Replace "is this subdirectory a separate repository that should not
be touched?" check "git clean" does by checking if it has .git/HEAD
using the submodule-related code with a more optimized check.
* ee/clean-remove-dirs:
read_gitfile_gently: fix use-after-free
clean: improve performance when removing lots of directories
p7300: add performance tests for clean
t7300: add tests to document behavior of clean and nested git
setup: sanity check file size in read_gitfile_gently
setup: add gentle version of read_gitfile
Move machinery to parse human-readable scaled numbers like 1k, 4M,
and 2G as an option parameter's value from pack-objects to
parse-options API, to make it available to other codepaths.
* cb/parse-magnitude:
parse-options: move unsigned long option parsing out of pack-objects.c
test-parse-options: update to handle negative ints
"git verify-tag" and "git verify-commit" have been taught to share
more code, and then learned to optionally show the verification
message from the underlying GPG implementation.
* bc/gpg-verify-raw:
verify-tag: add option to print raw gpg status information
verify-commit: add option to print raw gpg status information
gpg: centralize printing signature buffers
gpg: centralize signature check
verify-commit: add test for exit status on untrusted signature
verify-tag: share code with verify-commit
verify-tag: add tests
GSoC project to rebuild ref listing by branch and tag based on the
for-each-ref machinery. This is its first part.
* kn/for-each-ref:
ref-filter: make 'ref_array_item' use a FLEX_ARRAY for refname
for-each-ref: introduce filter_refs()
ref-filter: move code from 'for-each-ref'
ref-filter: add 'ref-filter.h'
for-each-ref: rename variables called sort to sorting
for-each-ref: rename some functions and make them public
for-each-ref: introduce 'ref_array_clear()'
for-each-ref: introduce new structures for better organisation
for-each-ref: rename 'refinfo' to 'ref_array_item'
for-each-ref: clean up code
for-each-ref: extract helper functions out of grab_single_ref()
Add an environment variable to tell Git to look into refs hierarchy
other than refs/replace/ for the object replacement data.
* mh/replace-refs:
Allow to control where the replace refs are looked for
"git for-each-ref" reported "missing object" for 0{40} when it
encounters a broken ref. The lack of object whose name is 0{40} is
not the problem; the ref being broken is.
* mh/reporting-broken-refs-from-for-each-ref:
read_loose_refs(): treat NULL_SHA1 loose references as broken
read_loose_refs(): simplify function logic
for-each-ref: report broken references correctly
t6301: new tests of for-each-ref error handling
Add the '--contains' option provided by 'ref-filter'. The '--contains'
option lists only refs which contain the mentioned commit (HEAD if no
commit is explicitly given).
Add documentation and tests for the same.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'tag -l' and 'branch -l' have two different ways of finding
out if a certain ref contains a commit. Implement both these
methods in ref-filter and give the caller of ref-filter API
the option to pick which implementation to be used.
'branch -l' uses 'is_descendant_of()' from commit.c which is
left as the default implementation to be used.
'tag -l' uses a more specific algorithm since ffc4b80. This
implementation is used whenever the 'with_commit_tag_algo' bit
is set in 'struct ref_filter'.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a macro for using the '--contains' option in parse-options.h
also include an optional '--with' option macro which performs the
same action as '--contains'.
Make tag.c and branch.c use this new macro.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename parse_opt_with_commit() to parse_opt_commits() to show
that it can be used to obtain a list of commits and is not
constricted to usage of '--contains' option.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the '--merged' and '--no-merged' options provided by 'ref-filter'.
The '--merged' option lets the user to only list refs merged into the
named commit. The '--no-merged' option lets the user to only list refs
not merged into the named commit.
Add documentation and tests for the same.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'branch -l' we have '--merged' option which only lists refs (branches)
merged into the named commit and '--no-merged' option which only lists
refs (branches) not merged into the named commit. Implement these two
options in ref-filter.{c,h} so that other commands can benefit from this.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'parse_opt_merge_filter()' to parse '--merged' and '--no-merged'
options and write macros for the same.
This is copied from 'builtin/branch.c' which will eventually be removed
when we port 'branch.c' to use ref-filter APIs.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the '--points-at' option provided by 'ref-filter'. The
option lets the user to list only refs which points at the
given object.
Add documentation and tests for the same.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'tag -l' we have '--points-at' option which lets users
list only tags of a given object. Implement this option in
'ref-filter.{c,h}' so that other commands can benefit from this.
This is duplicated from tag.c, we will eventually remove that
when we port tag.c to use ref-filter APIs.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename 'parse_opt_points_at()' to 'parse_opt_object_name()' and
move it from 'tag.c' to 'parse-options'. This now acts as a common
parse_opt function which accepts an objectname and stores it into
a sha1_array.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce filter_refs() which will act as an API for filtering
a set of refs. Based on the type of refs the user has requested,
we iterate through those refs and apply filters as per the
given ref_filter structure and finally store the filtered refs
in the ref_array structure.
Currently this will wrap around ref_filter_handler(). Hence,
ref_filter_handler is made file scope static.
As users of this API will no longer send a ref_filter_cbdata
structure directly, we make the elements of ref_filter_cbdata
pointers. We can now use the information given by the users
to obtain our own ref_filter_cbdata structure. Changes are made to
support the change in ref_filter_cbdata structure.
Make 'for-each-ref' use this API.
Helped-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move most of the code from 'for-each-ref' to 'ref-filter' to make
it publicly available to other commands, this is to unify the code
of 'tag -l', 'branch -l' and 'for-each-ref' so that they can share
their implementations with each other.
Add 'ref-filter' to the Makefile, this completes the movement of code
from 'for-each-ref' to 'ref-filter'.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to call it if value is the empty string. This also
eliminates code duplication.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for splitting a whitespace-separated list of values in
"remotes.<name>" had an off-by-one error that caused it to skip over
remotes whose names consist of a single character.
Also remove unnecessary braces.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A minor bugfix when pack bitmap is used with "rev-list --count".
* jk/rev-list-no-bitmap-while-pruning:
rev-list: disable --use-bitmap-index when pruning commits
Disable "have we lost a race with competing repack?" check while
receiving a huge object transfer that runs index-pack.
* jk/index-pack-reduce-recheck:
index-pack: avoid excessive re-reading of pack directory
This gives a thin abstraction between the conflict ID that is a hash
value obtained by inspecting the conflicts and the name of the
directory under $GIT_DIR/rr-cache/, in which the previous resolution
is recorded to be replayed. The plan is to make sure that the
presence of the directory does not imply the presense of a previous
resolution and vice-versa, and later allow us to have more than one
pair of <preimage, postimage> for a given conflict ID.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most places we call conflict IDs "name" and some others we call them
"hex"; update all of them to "id".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If HEAD of a repository points to a conflict reference, such as:
* There exist a reference named 'refs/heads/jx/feature1', but HEAD
points to 'refs/heads/jx', or
* There exist a reference named 'refs/heads/feature', but HEAD points
to 'refs/heads/feature/bad'.
When we push to delete a reference for this repo, such as:
git push /path/to/bad-head-repo.git :some/good/reference
The git-receive-pack process will crash.
This is because if HEAD points to a conflict reference, the function
`resolve_refdup("HEAD", ...)` does not return a valid reference name,
but a null buffer. Later matching the delete reference against the null
buffer will cause git-receive-pack crash.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase learned to stash changes when it encounters a dirty work tree,
but git pull --rebase does not.
Only verify if the working tree is dirty when rebase.autostash is not
enabled.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-send-pack is exec'ed, as is done by git-remote-http, it
does not read the config, and configured value of user.signingkey is
ignored. Thus it was impossible to specify a signing key over HTTP,
other than the default key in the keyring having a User ID matching
the "Name <email>" format.
This patch at least partially fixes the problem by reading in the GPG
config from within send-pack. It does not address the related problem
of plumbing a value for this configuration option using
`git -c user.signingkey push ...`.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the creation of a ref (e.g. stash) with a reflog already in
place. For most refs (e.g. those under refs/heads), this happens
automatically, but for others, we need this option.
Currently, git does this by pre-creating the reflog, but alternate ref
backends might store reflogs somewhere other than .git/logs. Code
that now directly manipulates .git/logs should instead use git
plumbing commands.
I also added --create-reflog to git tag, just for completeness.
In a moment, we will use this argument to make git stash work with
alternate ref backends.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is necessary because alternate ref backends might store reflogs
somewhere other than .git/logs. Code that now directly manipulates
.git/logs should instead go through git-reflog.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The safe_create_reflog function creates a reflog, if it does not
already exist.
The log_ref_setup function becomes private and gains a force_create
parameter to force the creation of a reflog even if log_all_ref_updates
is false or the refname is not one of the special refnames.
The new parameter also reduces the need to store, modify, and restore
the log_all_ref_updates global before reflog creation.
In a moment, we will use this to add reflog creation commands to
git-reflog.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an err argument to log_ref_setup that can explain the reason
for a failure. This then eliminates the need to manage errno through
this function since we can just add strerror(errno) to the err string
when meaningful. No callers relied on errno from this function for
anything else than the error message.
Also add err arguments to private functions write_ref_to_lockfile,
log_ref_write_1, commit_ref_update. This again eliminates the need to
manage errno in these functions.
Some error messages are slightly reordered.
Update of a patch by Ronnie Sahlberg.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git-worktree no longer relies upon git-checkout for new branch
creation, new worktree HEAD set up, or initial worktree population,
git-checkout no longer needs intimate knowledge that it may be operating
in a newly created worktree. Therefore, drop 'new_worktree_mode' and the
private GIT_CHECKOUT_NEW_WORKTREE environment variable by which
git-worktree communicated to git-checkout that it was being invoked to
manipulate a new worktree.
This reverts the remaining changes to checkout.c by 529fef2 (checkout:
support checking out into a new working directory, 2014-11-30).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git-worktree handles all functionality (--force, --detach,
-b/-B) previously delegated to git-checkout, actual population of the
new worktree can be accomplished more directly and lightweight with
"git reset --hard" in place of "git checkout".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git-worktree sets HEAD explicitly to its final value via either
git-symbolic-ref or git-update-ref, rather than relying upon
git-checkout to do so, the "hack" for pacifying is_git_directory() with
a temporary HEAD, though still necessary, can be simplified.
Since the real HEAD is now populated with its proper final value, the
value of the temporary HEAD truly no longer matters, and any value which
looks like an object ID is good enough to satisfy is_git_directory().
Therefore, just set the temporary HEAD to a literal value rather than
going through the effort of resolving the current branch's HEAD.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates setting of HEAD in the new worktree and
initial worktree population into a single git-checkout invocation which
requires git-checkout to have special knowledge that it is operating on
a newly created worktree. The eventual goal is to rid git-checkout of
that overly-intimate knowledge.
Once these operations are separate, git-worktree will no longer be able
to delegate to git-branch the setting of the new worktree's HEAD to the
desired branch (or commit, if detached). Therefore, make git-worktree
itself responsible for setting up HEAD as either a symbolic reference,
if associated with a branch, or detached, if not.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates setting of HEAD in the new worktree
with initial worktree population via a single git-checkout invocation,
which requires git-checkout to have special knowledge that it is
operating in a newly created worktree. The eventual goal is to separate
these operations and rid git-checkout of that overly-intimate knowledge.
Once these operations are separate, git-worktree will no longer be able
to rely upon git-branch to determine the state of the worktree (branch
name or detached), or to check for error conditions, such as the
requested branch already checked out elsewhere, or an invalid reference.
Therefore, imbue git-worktree with the intelligence to determine a
branch name or detached state locally, and to perform error checking on
its own.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The caller of add_worktree() provides it with a command to invoke to
populate the new worktree. This was a useful abstraction during the
conversion of "git checkout --to" functionality to "git worktree add"
since git-checkout and git-worktree constructed the population command
differently. However, now that "git checkout --to" has been retired, and
add_worktree() has access to the options given to "worktree add", this
extra indirection is no longer useful and makes the code a bit
convoluted.
Moreover, the eventual goal is for git-worktree to make setting of HEAD
and worktree population distinct operations, whereas they are currently
conflated into a single git-checkout invocation. As such, add_worktree()
will eventually invoke other commands in addition to the worktree
population command, so it will be doing command construction itself
anyhow.
Therefore, relocate construction of the worktree population command from
add() to add_worktree().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take advantage of 'struct child_process.env' to make it obvious that
environment variables set by add_worktree() are intended specifically
for sub-commands it invokes to operate in the new worktree.
We assign a local 'struct argv_array' to child_process.env, rather than
utilizing the child_process.env_array 'struct argv_array', because
future patches will make add_worktree() invoke additional sub-commands,
and it's simpler to populate the environment array just once, whereas
child_process.env_array gets cleared after each invocation, thus would
require re-population for each sub-command.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates branch creation, setting of HEAD in the
new worktree, and worktree population into a single sub-invocation of
git-checkout, which requires git-checkout to be specially aware that it
is operating in a newly-created worktree. The goal is to free
git-checkout of that special knowledge, and to do so, git-worktree will
eventually perform those operations separately. Thus, as a first step,
rather than piggybacking on git-checkout's -b/-B ability to create a new
branch at checkout time, make git-worktree responsible for branch
creation itself.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix oversight where branch auto-vivication incorrectly kicks in when
--detach is specified and <branch> omitted. Instead, treat:
git worktree add --detach <path>
as shorthand for:
git worktree add --detach <path> HEAD
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Be consistent with git-checkout which disallows this (not particularly
meaningful) combination.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
add_worktree() will eventually need to deal with some options itself, so
introduce a structure into which options can be conveniently bundled,
and pass it along to add_worktree().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'new_branch' be the name of the new branch for both forced and
non-forced cases; and add boolean 'force_new_branch' to indicate forced
branch creation. This will simplify logic later on when git-worktree
handles branch creation locally rather than delegating it to
git-checkout as part of the worktree population phase.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-worktree creates a new worktree, it reports:
Enter "<path>" (identifier <tag>)
which misleadingly implies that it is setting <path> as the working
directory (as if "cd <path>" had been invoked), whereas it's actually
preparing the new worktree by creating its administrative files, setting
HEAD, and populating it. Make this more clear by instead saying:
Preparing "<path>" (identifier <tag>)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-worktree currently conflates new branch creation, setting of HEAD in
the new wortkree, and worktree population into a single sub-invocation
of git-checkout. However, these operations will eventually be separated,
and git-worktree itself will need to be able to detect if the branch is
already checked out elsewhere, rather than relying upon git-branch to
make this determination, so publish die_if_checked_out().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_linked_checkout() only understands symref-style HEAD (i.e. "ref:
refs/heads/master"), however, HEAD may also be a an actual symbolic link
(on platforms which support it). To accurately detect if a branch is
checked out elsewhere, it needs to handle symbolic link HEAD, as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_linked_checkout() only understands symref-style HEAD (i.e. "ref:
refs/heads/master"), however, HEAD may also be a an actual symbolic link
(on platforms which support it), thus it will need to check that style
HEAD, as well (via readlink()). As a preparatory step, simplify parsing
of symref-style HEAD so the actual branch check can be re-used easily
for symbolic links (in an upcoming patch).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When check_linked_checkout() discovers that the branch is already
checked out elsewhere, it emits the diagnostic:
'blorp' is already checked out at '/some/path/.git'
which is misleading since "checked out at" implies the working tree, but
".git" is the location of the repository administrative files. Fix by
dropping ".git" from the message.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to publish die_if_checked_out() so that callers other than
git-checkout can take advantage of it, however, those callers won't have
access to git-checkout's "struct branch_info". Therefore, change it to
accept the full name of the branch as a simple string instead.
While here, also give the argument a more meaningful name ("branch"
instead of "new").
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to keep the strbuf active long after its last use.
By releasing it as early as possible, resource management is simplified
and there is less worry about future changes resulting in a leak.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
die_if_checked_out() is intended to check if the branch about to be
checked out is already checked out either in the main worktree or in a
linked worktree. However, if .git/worktrees directory does not exist,
then it never bothers checking the main worktree, even though the
specified branch might indeed be checked out there, which is fragile
behavior.
This hasn't been a problem in practice since the current implementation
of "git worktree add" (and, earlier, "git checkout --to") always creates
.git/worktrees before die_if_checked_out() is called by the child "git
checkout" invocation which populates the new worktree.
However, git-worktree will eventually want to call die_if_checked_out()
itself rather than only doing so indirectly as a side-effect of invoking
git-checkout, and reliance upon order of operations (creating
.git/worktrees before checking if a branch is already checked out) is
fragile. As a general function, callers should not be expected to abide
by this undocumented and unwarranted restriction. Therefore, make
die_if_checked_out() more robust by checking the main worktree whether
.git/worktrees exists or not.
While here, also move a comment explaining why die_if_checked_out()'s
helper parses HEAD manually. Such information resides more naturally
with the helper itself rather than at its first point of call.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_linked_checkouts() doesn't just "check" linked checkouts for
"something"; specifically, it aborts the operation if the branch about
to be checked out is already checked out elsewhere. Therefore, rename it
to die_if_checked_out() to give a better indication of its function.
The more meaningful name will be particularly important when this
function is later published for use by other callers.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --ignore-other-worktree is specified, we unconditionally skip the
check to see if the requested branch is already checked out in a linked
worktree. Since we know that we will be skipping that check, there is no
need to resolve HEAD in order to detect other conditions under which we
may skip the check.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of df0b6cf (worktree: new place for "git prune --worktrees",
2015-06-29), linked worktree pruning functionality moved from
"git prune --worktrees" to "git worktree prune". Rename the
associated configuration variable accordingly.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" used to ignore missing or invalid objects recorded in reflog.
* mh/fsck-reflog-entries:
fsck: report errors if reflog entries point at invalid objects
fsck_handle_reflog_sha1(): new function
"git format-patch --ignore-if-upstream A..B" did not like to be fed
tags as boundary commits.
* jc/do-not-feed-tags-to-clear-commit-marks:
format-patch: do not feed tags to clear_commit_marks()
A line in the input to "rev-parse --parseopt" describes an option by
listing a short and/or long name, optional flags [*=?!], argument hint,
and then whitespace and help string.
We did not allow any of the [*=?!] characters in the argument hints.
The following input
pair=key=value equals sign in the hint
used to generate a help line like this:
--pair=key <value> equals sign in the hint
and used to expect "pair=key" as the argument name.
That is not very helpful as we generally do not want any of the [*=?!]
characters in the argument names. But we do want to use at least the
equals sign in the argument hints.
Update the parser to make long argument names stop at the first [*=?!]
character.
Add test case with equals sign in the argument hint and update the test
to perform all the operations in test_expect_success matching the
t/README requirements and allowing commands like
./t1502-rev-parse-parseopt.sh --run=1-2
to stop at the test case 2 without any further modification of the test
state area.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update to the "linked checkout" in 2.5.0-rc1.
Instead of "checkout --to" that does not do what "checkout"
normally does, move the functionality to "git worktree add".
* es/worktree-add: (24 commits)
Revert "checkout: retire --ignore-other-worktrees in favor of --force"
checkout: retire --ignore-other-worktrees in favor of --force
worktree: add: auto-vivify new branch when <branch> is omitted
worktree: add: make -b/-B default to HEAD when <branch> is omitted
worktree: extract basename computation to new function
checkout: require worktree unconditionally
checkout: retire --to option
tests: worktree: retrofit "checkout --to" tests for "worktree add"
worktree: add -b/-B options
worktree: add --detach option
worktree: add --force option
worktree: introduce "add" command
checkout: drop 'checkout_opts' dependency from prepare_linked_checkout
checkout: make --to unconditionally verbose
checkout: prepare_linked_checkout: drop now-unused 'new' argument
checkout: relocate --to's "no branch specified" check
checkout: fix bug with --to and relative HEAD
Documentation/git-worktree: add EXAMPLES section
Documentation/git-worktree: add high-level 'lock' overview
Documentation/git-worktree: split technical info from general description
...
"git checkout [<tree-ish>] <paths>" spent unnecessary cycles
checking if the current branch was checked out elsewhere, when we
know we are not switching the branches ourselves.
* nd/multiple-work-trees:
worktree: new place for "git prune --worktrees"
checkout: don't check worktrees when not necessary
This reverts commit 0d1a151783.
When trying to switch to a different branch, that happens to be
checked out in another working tree, the user shouldn't have to
give up the other safety measures (like protecting the local changes
that overlap the difference between the branches) while defeating
the "no two checkouts of the same branch" safety.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A minor bugfix when pack bitmap is used with "rev-list --count".
* jk/rev-list-no-bitmap-while-pruning:
rev-list: disable --use-bitmap-index when pruning commits
People who work on projects with mostly linear history with frequent
whole file renames may want to always use "git log --follow" when
inspecting the life of the content that live in a single path.
Teach the command to behave as if "--follow" was given from the
command line when log.follow configuration variable is set *and*
there is one (and only one) path on the command line.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a safeguard, checking out a branch already checked out by a different
worktree is disallowed. This behavior can be overridden with
--ignore-other-worktrees, however, this option is neither obvious nor
particularly discoverable. As a common safeguard override, --force is
more likely to come to mind. Therefore, overload it to also suppress the
check for a branch already checked out elsewhere.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a convenience, when <branch> is omitted from "git worktree <path>
<branch>" and neither -b nor -B is used, automatically create a new
branch named after <path>, as if "-b $(basename <path>)" was specified.
Thus, "git worktree add ../hotfix" creates a new branch named "hotfix"
and associates it with new worktree "../hotfix".
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a convenience, like "git branch" and "git checkout -b", make
"git worktree add -b <newbranch> <path> <branch>" default to HEAD when
<branch> is omitted.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A subsequent patch will also need to compute the basename of the new
worktree, so factor out this logic into a new function.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to allow linked worktree creation via "git checkout --to" from
a bare repository, 3473ad0 (checkout: don't require a work tree when
checking out into a new one, 2014-11-30) dropped git-checkout's
unconditional NEED_WORK_TREE requirement and instead performed worktree
setup conditionally based upon presence or absence of the --to option.
Now that --to has been retired and git-checkout is no longer responsible
for linked worktree creation, the NEED_WORK_TREE requirement can be
re-instated.
This effectively reverts 3473ad0, except for the tests it added which
now check bare repository behavior of "git worktree add" instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that "git worktree add" has achieved user-facing feature-parity with
"git checkout --to", retire the latter.
Move the actual linked worktree creation functionality,
prepare_linked_checkout() and its helpers, verbatim from checkout.c to
worktree.c.
This effectively reverts changes to checkout.c by 529fef2 (checkout:
support checking out into a new working directory, 2014-11-30) with the
exception of merge_working_tree() and switch_branches() which still
require specialized knowledge that a the checkout is occurring in a
newly-created linked worktree (signaled to them by the private
GIT_CHECKOUT_NEW_WORKTREE environment variable).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of git-worktree's roles is to populate the new worktree, much like
git-checkout, and thus, for convenience, ought to support several of the
same shortcuts. Toward this goal, add -b/-B options to create a new
branch and check it out in the new worktree.
(For brevity, only -b is mentioned in the synopsis; -B is omitted.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of git-worktree's roles is to populate the new worktree, much like
git-checkout, and thus, for convenience, ought to support several of the
same shortcuts. Toward this goal, add a --detach option to detach HEAD
in the new worktree.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, "git worktree add" refuses to create a new worktree when
the requested branch is already checked out elsewhere. Add a --force
option to override this safeguard.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to relocate "git checkout --to" functionality to "git
worktree add". As a first step, introduce a bare-bones git-worktree
"add" command along with documentation. At this stage, "git worktree
add" merely invokes "git checkout --to" behind the scenes, but an
upcoming patch will move the actual functionality
(checkout.c:prepare_linked_checkout() and its helpers) to worktree.c.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to relocate "git checkout --to" functionality to "git
worktree add", however, worktree.c won't have access to the 'struct
checkout_opts' passed to prepare_linked_worktree(), which it consults
for the pathname of the new worktree and the argv[] of the command it
should run to populate the new worktree. Facilitate relocation of
prepare_linked_worktree() by instead having it accept the pathname and
argv[] directly, thus eliminating the final references to 'struct
checkout_opts'.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_linked_checkout() respects git-checkout's --quiet flag, however,
the plan is to relocate "git checkout --to" functionality to "git
worktree add", and git-worktree does not (yet) have a --quiet flag.
Consequently, make prepare_linked_checkout() unconditionally verbose to
ease eventual code movement to worktree.c.
(A --quiet flag can be added to git-worktree later if there is demand
for it.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only references to 'new' were folded out by the last two patches.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plan is to relocate "git checkout --to" functionality to "git
worktree add", however, this check expects a 'struct branch_info' which
git-worktree won't have at hand. It will, however, have access to its
own command-line from which it can pick up the branch name. Therefore,
as a preparatory step, rather than having prepare_linked_checkout()
perform this check, make it the caller's responsibility.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given "git checkout --to <path> HEAD~1", the new worktree's HEAD should
begin life at the current branch's HEAD~1, however, it actually ends up
at HEAD~2. This happens because:
1. git-checkout resolves HEAD~1
2. to satisfy is_git_directory(), prepare_linked_worktree() creates
a HEAD for the new worktree with the value of the resolved HEAD~1
3. git-checkout re-invokes itself with the same arguments within the
new worktree to populate the worktree
4. the sub git-checkout resolves HEAD~1 relative to its own HEAD,
which is the resolved HEAD~1 from the original invocation,
resulting unexpectedly and incorrectly in HEAD~2 (relative to the
original)
Fix this by unconditionally assigning the current worktree's HEAD as the
value of the new worktree's HEAD.
As a side-effect, this change also eliminates a dependence within
prepare_linked_checkout() upon 'struct branch_info'. The plan is to
eventually relocate "git checkout --to" functionality to "git worktree
add", and worktree.c won't have knowledge of 'struct branch_info', so
removal of this dependency is a step toward that goal.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When c6458e60 (index-pack: kill union delta_base to save memory,
2015-04-18) attempted to reduce the memory footprint of index-pack,
one of the key thing it did was to keep track of ref-deltas and
ofs-deltas separately.
In fix_unresolved_deltas(), however it forgot that it now wants to
look only at ref deltas in one place. The code allocated an array
for nr_unresolved, which is sum of number of ref- and ofs-deltas
minus nr_resolved, which may be larger or smaller than the number
ref-deltas. Depending on nr_resolved, this was either under or over
allocating.
Also, the old code before this change had to use 'i' and 'n' because
some of the things we see in the (old) deltas[] array we scanned
with 'i' would not make it into the sorted_by_pos[] array in the old
world order, but now because you have only ref delta in a separate
ref_deltas[] array, they increment lock&step. We no longer need
separate variables. And most importantly, we shouldn't pass the
nr_unresolved parameter, as this number does not play a role in the
working of this helper function.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reachability bitmaps do not have enough information to
tell us which commits might have changed path "foo", so the
current code produces wrong answers for:
git rev-list --use-bitmap-index --count HEAD -- foo
(it silently ignores the "foo" limiter). Instead, we should
fall back to doing a normal traversal (it is OK to fall
back rather than complain, because --use-bitmap-index is a
pure optimization, and might not kick in for other reasons,
such as there being no bitmaps in the repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--count should be mentioned in the usage guide, this updates code and
documentation.
Signed-off-by: Lawrence Siebert <lawrencesiebert@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This feeds the format directly to strftime. Besides being a
little more flexible, the main advantage is that your system
strftime may know more about your locale's preferred format
(e.g., how to spell the days of the week).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is more readable, and won't break if we ever change the
order of the date_mode enum.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 23af91d (prune: strategies for linked checkouts - 2014-11-30)
adds "--worktrees" to "git prune" without realizing that "git prune" is
for object database only. This patch moves the same functionality to a
new command "git worktree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
The sorting we could probably live without, but printing
duplicates is just a hassle for the user, who must then
de-dup themselves (or risk a wrong answer if they are doing
something like counting objects with a particular property).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If this extension is used in a repository, then no
operations should run which may drop objects from the object
storage. This can be useful if you are sharing that storage
with other repositories whose refs you cannot see.
For instance, if you do:
$ git clone -s parent child
$ git -C parent config extensions.preciousObjects true
$ git -C parent config core.repositoryformatversion 1
you now have additional safety when running git in the
parent repository. Prunes and repacks will bail with an
error, and `git gc` will skip those operations (it will
continue to pack refs and do other non-object operations).
Older versions of git, when run in the repository, will
fail on every operation.
Note that we do not set the preciousObjects extension by
default when doing a "clone -s", as doing so breaks
backwards compatibility. It is a decision the user should
make explicitly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disable "have we lost a race with competing repack?" check while
receiving a huge object transfer that runs index-pack.
* jk/index-pack-reduce-recheck:
index-pack: avoid excessive re-reading of pack directory
"git for-each-ref" reported "missing object" for 0{40} when it
encounters a broken ref. The lack of object whose name is 0{40} is
not the problem; the ref being broken is.
* mh/reporting-broken-refs-from-for-each-ref:
read_loose_refs(): treat NULL_SHA1 loose references as broken
read_loose_refs(): simplify function logic
for-each-ref: report broken references correctly
t6301: new tests of for-each-ref error handling
"git fsck" used to ignore missing or invalid objects recorded in reflog.
* mh/fsck-reflog-entries:
fsck: report errors if reflog entries point at invalid objects
fsck_handle_reflog_sha1(): new function
"git format-patch --ignore-if-upstream A..B" did not like to be fed
tags as boundary commits.
* jc/do-not-feed-tags-to-clear-commit-marks:
format-patch: do not feed tags to clear_commit_marks()
"git apply" cannot diagnose a patch corruption when the breakage is
to mark the length of the hunk shorter than it really is on the
hunk header line "@@ -l,k +m,n @@"; one special case it could is
when the hunk becomes no-op (e.g. k == n == 2 for two-line context
patch output), and it learned how to do so.
* jc/apply-reject-noop-hunk:
apply: reject a hunk that does not do anything
Identical to support in `git receive-pack for the config option
`receive.fsck.skiplist`, we now support ignoring given objects in
`git fsck` via `fsck.skiplist` altogether.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional new config option `receive.fsck.skipList` specifies the path
to a file listing the names, i.e. SHA-1s, one per line, of objects that
are to be ignored by `git receive-pack` when `receive.fsckObjects = true`.
This is extremely handy in case of legacy repositories where it would
cause more pain to change incorrect objects than to live with them
(e.g. a duplicate 'author' line in an early commit object).
The intended use case is for server administrators to inspect objects
that are reported by `git push` as being too problematic to enter the
repository, and to add the objects' SHA-1 to a (preferably sorted) file
when the objects are legitimate, i.e. when it is determined that those
problematic objects should be allowed to enter the server.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option avoids unpacking each and all blob objects, and just
verifies the connectivity. In particular with large repositories, this
speeds up the operation, at the expense of missing corrupt blobs,
ignoring unreachable objects and other fsck issues, if any.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have support in `git receive-pack` to deal with some legacy
repositories which have non-fatal issues.
Let's make `git fsck` itself useful with such repositories, too, by
allowing users to ignore known issues, or at least demote those issues
to mere warnings.
Example: `git -c fsck.missingEmail=ignore fsck` would hide
problems with missing emails in author, committer and tagger lines.
In the same spirit that `git receive-pack`'s usage of the fsck machinery
differs from `git fsck`'s – some of the non-fatal warnings in `git fsck`
are fatal with `git receive-pack` when receive.fsckObjects = true, for
example – we strictly separate the fsck.<msg-id> from the
receive.fsck.<msg-id> settings.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, missing emails in commit and tag objects can be demoted to
mere warnings with
git config receive.fsck.missingemail=warn
The value is actually a comma-separated list.
In case that the same key is listed in multiple receive.fsck.<msg-id>
lines in the config, the latter configuration wins (this can happen for
example when both $HOME/.gitconfig and .git/config contain message type
settings).
As git receive-pack does not actually perform the checks, it hands off
the setting to index-pack or unpack-objects in the form of an optional
argument to the --strict option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit d95d728aba.
It turns out that many other commands that need to interact with the
result of running diff-files and diff-index, e.g. "git apply", "git
rm", etc., need to be adjusted to the new world order it brings in.
For example, it would break this sequence to correct a whitespace
breakage in the parts you changed:
git add -N file
git diff --cached file | git apply --cached --whitespace=fix
git checkout file
In the old world order, "diff" showed a patch to modify an existing
empty file by adding its full contents, and "apply" updated the
index by modifying the existing empty blob (which is what an
Intent-to-Add entry records in the index) with that patch.
In the new world order, "diff" shows a patch to create a new file
with its full contents, but because "apply" thinks that the i-t-a
entry already exists in the index, it refused to accept a creation.
Adjusting "apply" to this new world order is easy, but we need to
assess the extent of the damage to the rest of the system the new
world order brought in before going forward and adjust them all,
after which we can resurrect the commit being reverted here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unsigned long option parsing (including 'k'/'m'/'g' suffix
parsing) is more widely applicable. Add support for OPT_MAGNITUDE
to parse-options.h and change pack-objects.c use this support.
The error behavior on parse errors follows that of OPT_INTEGER. The
name of the option that failed to parse is reported with a brief
message describing the expect format for the option argument and
then the full usage message for the command invoked.
This differs from the previous behavior for OPT_ULONG used in
pack-objects for --max-pack-size and --window-memory which used to
display the value supplied in the error message and did not display
the full usage message.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can sometimes be useful to examine all objects in the
repository. Normally this is done with "git rev-list --all
--objects", but:
1. That shows only reachable objects. You may want to look
at all available objects.
2. It's slow. We actually open each object to walk the
graph. If your operation is OK with seeing unreachable
objects, it's an order of magnitude faster to just
enumerate the loose directories and pack indices.
You can do this yourself using "ls" and "git show-index",
but it's non-obvious. This patch adds an option to
"cat-file --batch-check" to operate on all available
objects (rather than reading names from stdin).
This is based on a proposal by Charles Bailey to provide a
separate "git list-all-objects" command. That is more
orthogonal, as it splits enumerating the objects from
getting information about them. However, in practice you
will either:
a. Feed the list of objects directly into cat-file anyway,
so you can find out information about them. Keeping it
in a single process is more efficient.
b. Ask the listing process to start telling you more
information about the objects, in which case you will
reinvent cat-file's batch-check formatter.
Adding a cat-file option is simple and efficient. And if you
really do want just the object names, you can always do:
git cat-file --batch-check='%(objectname)' --batch-all-objects
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are really two things going on in this function:
1. We convert the name we got on stdin to a sha1.
2. We look up and print information on the sha1.
Let's split out the second half so that we can call it
separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If batch_one_object returns an error code, we stop reading
input. However, it will only do so if we feed it NULL,
which cannot happen; we give it the "buf" member of a
strbuf, which is always non-NULL.
We did originally stop on other errors (like a missing
object), but this was changed in 3c076db (cat-file --batch /
--batch-check: do not exit if hashes are missing,
2008-06-09). These days we keep going for any per-object
error (and print "missing" when necessary).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use a direct write() to output the results of --batch and
--batch-check. This is good for processes feeding the input
and reading the output interactively, but it introduces
measurable overhead if you do not want this feature. For
example, on linux.git:
$ git rev-list --objects --all | cut -d' ' -f1 >objects
$ time git cat-file --batch-check='%(objectsize)' \
<objects >/dev/null
real 0m5.440s
user 0m5.060s
sys 0m0.384s
This patch adds an option to use regular stdio buffering:
$ time git cat-file --batch-check='%(objectsize)' \
--buffer <objects >/dev/null
real 0m4.975s
user 0m4.888s
sys 0m0.092s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not put extra whitespace before the first macro
argument.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-tag by default displays human-readable output on standard error.
However, it can also be useful to get access to the raw gpg status
information, which is machine-readable, allowing automated
implementation of signing policy. Add a --raw option to make verify-tag
produce the gpg status information on standard error instead of the
human-readable format.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-commit by default displays human-readable output on standard
error. However, it can also be useful to get access to the raw gpg
status information, which is machine-readable, allowing automated
implementation of signing policy. Add a --raw option to make
verify-commit produce the gpg status information on standard error
instead of the human-readable format.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to handle printing of signature data from a struct
signature_check is very similar between verify-commit and verify-tag.
Place this in a single function. verify-tag retains its special case
behavior of printing the tag even when no valid signature is found.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-commit and verify-tag both share a central codepath for verifying
commits: check_signature. However, verify-tag exited successfully for
untrusted signature, while verify-commit exited unsuccessfully.
Centralize this signature check and make verify-commit adopt the older
verify-tag behavior. This behavior is more logical anyway, as the
signature is in fact valid, whether or not there's a path of trust to
the author.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify-tag was executing an entirely different codepath than
verify-commit, except for the underlying verify_signed_buffer. Move
much of the code from check_commit_signature to a generic
check_signature function and adjust both codepaths to call it.
Update verify-tag to explicitly output the signature text, as we now
call verify_signed_buffer with strbufs to catch the output, which
prevents it from being printed automatically.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ref_transaction_update() family of functions use the following
convention for their old_sha1 parameters:
* old_sha1 == NULL: Don't check the old value at all.
* is_null_sha1(old_sha1): Ensure that the reference didn't exist
before the transaction.
* otherwise: Ensure that the reference had the specified value before
the transaction.
delete_ref() had a different convention, namely treating
is_null_sha1(old_sha1) as "don't care". Change it to adhere to the
standard convention to reduce the scope for confusion.
Please note that it is now a bug to pass old_sha1=NULL_SHA1 to
delete_ref() (because it doesn't make sense to delete a reference that
you already know doesn't exist). This is consistent with the behavior
of ref_transaction_delete().
Most of the callers of delete_ref() never pass old_sha1=NULL_SHA1 to
delete_ref(), and are therefore unaffected by this change. The
two exceptions are:
* The call in cmd_update_ref(), which passed NULL_SHA1 if the old
value passed in on the command line was 0{40} or the empty string.
Change that caller to pass NULL in those cases.
Arguably, it should be an error to call "update-ref -d" with the old
value set to "does not exist", just as it is for the `--stdin`
command "delete". But since this usage was accepted until now,
continue to accept it.
* The call in delete_branches(), which could pass NULL_SHA1 if
deleting a broken or symbolic ref. Change it to pass NULL in these
cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restructure the code to avoid clearing oldsha1 when oldval is unset.
It's value is not needed in that case, so this change makes it more
obvious that its initialization is consistent with its later use.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that this function does not overwrite its first
argument.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some functions from the refs module were still declared in cache.h.
Move them to refs.h.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" uses shortcuts when creating the initial set of
references:
* It writes them directly to packed-refs.
* It doesn't lock the individual references (though it does lock the
packed-refs file).
* It doesn't check for refname conflicts between two new references or
between one new reference and any hypothetical old ones.
* It doesn't create reflog entries for the reference creations.
This functionality was implemented in builtin/clone.c. But really that
file shouldn't have such intimate knowledge of how references are
stored. So provide a new function in the refs API,
initial_ref_transaction_commit(), which can be used for initial
reference creation. The new function is based on the ref_transaction
interface.
This means that we can make some other functions private to the refs
module. That will be done in a followup commit.
It would seem to make sense to add a test here that there are no
existing references, because that is how the function *should* be
used. But in fact, the "testgit" remote helper appears to call it
*after* having set up refs/remotes/<name>/HEAD and
refs/remotes/<name>/master, so we can't be so strict. For now, the
function trusts its caller to only call it when it makes sense. Future
commits will add some more limited sanity checks.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old version just looped over the references to delete, calling
delete_ref() on each one. But that has quadratic behavior, because
each call to delete_ref() might have to rewrite the packed-refs file.
This can be very expensive in a repository with a large number of
references. In some (admittedly extreme) repositories, we've seen
cases where the ref-pruning part of fetch takes multiple tens of
minutes.
Instead call delete_refs(), which (aside from being less code) has the
optimization that it only rewrites the packed-refs file a single time.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This slightly changes how errors are reported. The old and new code
both report errors that come from repack_without_refs() the same way.
But if an error occurs within delete_ref(), the old version only
emitted an error within delete_ref() without further comment. The new
version (in delete_refs()) still emits that error, but then follows it
up with
error(_("could not remove reference %s"), refname)
The "could not remove reference" error originally came from a similar
message in remove_branches() (from builtin/remote.c).
This is an improvement, because the error from delete_ref() (which
usually comes from ref_transaction_commit()) can be pretty low-level,
like
Cannot lock ref '%s': unable to resolve reference %s: %s
where the last "%s" is the original strerror.
In any case, I don't think we need to sweat the details too much,
because these errors should only ever be seen in the case of a broken
repository or a race between two processes; i.e., only in pretty rare
and anomalous situations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the function remove_branches() from builtin/remote.c to refs.c,
rename it to delete_refs(), and make it public.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of specifying whether a message by the fsck machinery constitutes
an error or a warning, let's specify an identifier relating to the
concrete problem that was encountered. This is necessary for upcoming
support to be able to demote certain errors to warnings.
In the process, simplify the requirements on the calling code: instead of
having to handle full-blown varargs in every callback, we now send a
string buffer ready to be used by the callback.
We could use a simple enum for the message IDs here, but we want to
guarantee that the enum values are associated with the appropriate
message types (i.e. error or warning?). Besides, we want to introduce a
parser in the next commit that maps the string representation to the
enum value, hence we use the slightly ugly preprocessor construct that
is extensible for use with said parser.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like the diff machinery, we are about to introduce more settings,
therefore it makes sense to carry them around as a (pointer to a) struct
containing all of them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the beginning of the rewrite of git-pull.sh to C, we introduced a
redirection to git-pull.sh if the environment variable
_GIT_USE_BUILTIN_PULL was not defined in order to not break test scripts
that relied on a functional git-pull.
Now that all of git-pull's functionality has been re-implemented in
builtin/pull.c, remove this redirection, and retire the old git-pull.sh
into contrib/examples/.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the error messages printed by die_no_merge_candidates() to take
into account that we may be "rebasing against" rather than "merging
with".
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Re-implement the behavior introduced by f9189cf (pull --rebase: exit
early when the working directory is dirty, 2008-05-21).
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cd67e4d (Teach 'git pull' about --rebase, 2007-11-28),
fetch+rebase could be set by default by defining the config variable
branch.<name>.rebase. This setting can be overriden on the command line
by --rebase and --no-rebase.
Since 6b37dff (pull: introduce a pull.rebase option to enable --rebase,
2011-11-06), git-pull --rebase can also be configured via the
pull.rebase configuration option.
Re-implement support for these two configuration settings by introducing
config_get_rebase() which is called before parse_options() to set the
default value of opt_rebase.
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since cd67e4d (Teach 'git pull' about --rebase, 2007-11-28), if the
--rebase option is set, git-rebase is run instead of git-merge.
Re-implement this by introducing run_rebase(), which is called instead
of run_merge() if opt_rebase is a true value.
Since c85c792 (pull --rebase: be cleverer with rebased upstream
branches, 2008-01-26), git-pull handles the case where the upstream
branch was rebased since it was last fetched. The fork point (old remote
ref) of the branch from the upstream branch is calculated before fetch,
and then rebased from onto the new remote head (merge_head) after fetch.
Re-implement this by introducing get_merge_branch_2() and
get_merge_branch_1() to find the upstream branch for the
specified/current branch, and get_rebase_fork_point() which will find
the fork point between the upstream branch and current branch.
However, the above change created a problem where git-rebase cannot
detect commits that are already upstream, and thus may result in
unnecessary conflicts. cf65426 (pull --rebase: Avoid spurious conflicts
and reapplying unnecessary patches, 2010-08-12) fixes this by ignoring
the above old remote ref if it is contained within the merge base of the
merge head and the current branch.
This is re-implemented in run_rebase() where fork_point is not used if
it is the merge base returned by get_octopus_merge_base().
Helped-by: Stefan Beller <sbeller@google.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f947413 (Use GIT_REFLOG_ACTION environment variable instead.,
2006-12-28) established git-pull's method for setting the reflog
message, which is to set the environment variable GIT_REFLOG_ACTION to
the evaluation of "pull${1+ $*}" if it has not already been set.
Re-implement this behavior.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b4dc085 (pull: merge into unborn by fast-forwarding from empty
tree, 2013-06-20) established git-pull's current behavior of pulling
into an unborn branch by fast-forwarding the work tree from an empty
tree to the merge head, then setting HEAD to the merge head.
Re-implement this behavior by introducing pull_into_void() which will be
called instead of run_merge() if HEAD is invalid.
Helped-by: Stephen Robin <stephen.robin@gmail.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b10ac50 (Fix pulling into the same branch., 2005-08-25), git-pull,
upon detecting that git-fetch updated the current head, will
fast-forward the working tree to the updated head commit.
Re-implement this behavior.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since d38a30d (Be more user-friendly when refusing to do something
because of conflict., 2010-01-12), git-pull will error out with
user-friendly advices if the user is in the middle of a merge or has
unmerged files.
Re-implement this behavior. While the "has unmerged files" case can be
handled by die_resolve_conflict(), we introduce a new function
die_conclude_merge() for printing a different error message for when
there are no unmerged files but the merge has not been finished.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b814da8 (pull: add pull.ff configuration, 2014-01-15), git-pull.sh
would lookup the configuration value of "pull.ff", and set the flag
"--ff" if its value is "true", "--no-ff" if its value is "false" and
"--ff-only" if its value is "only".
Re-implement this behavior.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a8c9bef (pull: improve advice for unconfigured error case,
2009-10-05) fully established the current advices given by git-pull for
the different cases where git-fetch will not have anything marked for
merge:
1. We fetched from a specific remote, and a refspec was given, but it
ended up not fetching anything. This is usually because the user
provided a wildcard refspec which had no matches on the remote end.
2. We fetched from a non-default remote, but didn't specify a branch to
merge. We can't use the configured one because it applies to the
default remote, and thus the user must specify the branches to merge.
3. We fetched from the branch's or repo's default remote, but:
a. We are not on a branch, so there will never be a configured branch
to merge with.
b. We are on a branch, but there is no configured branch to merge
with.
4. We fetched from the branch's or repo's default remote, but the
configured branch to merge didn't get fetched (either it doesn't
exist, or wasn't part of the configured fetch refspec)
Re-implement the above behavior by implementing get_merge_heads() to
parse the heads in FETCH_HEAD for merging, and implementing
die_no_merge_candidates(), which will be called when FETCH_HEAD has no
heads for merging.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since eb2a8d9 (pull: handle git-fetch's options as well, 2015-06-02),
git-pull knows about and handles git-fetch's options, passing them to
git-fetch. Re-implement this behavior.
Since 29609e6 (pull: do nothing on --dry-run, 2010-05-25) git-pull
supported the --dry-run option, exiting after git-fetch if --dry-run is
set. Re-implement this behavior.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/janitorial:
dir: remove unused variable sb
clean: remove unused variable buf
use file_exists() to check if a file exists in the worktree
"git clean pathspec..." tried to lstat(2) and complain even for
paths outside the given pathspec.
* dt/clean-pathspec-filter-then-lstat:
clean: only lstat files in pathspec
An earlier optimization broke index-pack for a large object
transfer; this fixes it before the breakage hits any released
version.
* nd/slim-index-pack-memory-usage:
index-pack: fix truncation of off_t in comparison
"git clean" uses resolve_gitlink_ref() to check for the presence of
nested git repositories, but it has the drawback of creating a
ref_cache entry for every directory that should potentially be
cleaned. The linear search through the ref_cache list causes a massive
performance hit for large number of directories.
Modify clean.c:remove_dirs to use setup.c:is_git_directory and
setup.c:read_gitfile_gently instead.
Both these functions will open files and parse contents when they find
something that looks like a git repository. This is ok from a
performance standpoint since finding repository candidates should be
comparatively rare.
Using is_git_directory and read_gitfile_gently should give a more
standardized check for what is and what isn't a git repository but
also gives three behavioral changes.
The first change is that we will now detect and avoid cleaning empty
nested git repositories (only init run). This is desirable.
Second, we will no longer die when cleaning a file named ".git" with
garbage content (it will be cleaned instead). This is also desirable.
The last change is that we will detect and avoid cleaning empty bare
repositories that have been placed in a directory named ".git". This
is not desirable but should have no real user impact since we already
fail to clean non-empty bare repositories in the same scenario. This
is thus deemed acceptable.
On top of this we add some extra precautions. If read_gitfile_gently
fails to open the git file, read the git file or verify the path in
the git file we assume that the path with the git file is a valid
repository and avoid cleaning.
Update t7300 to reflect these changes in behavior.
The time to clean an untracked directory containing 100000 sub
directories went from 61s to 1.7s after this change.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specify git-merge's options in the option list, and pass any specified
options to git-merge.
These options are:
* -n, --stat, --summary: since d8abe14 (merge, pull: introduce
'--(no-)stat' option, 2008-04-06)
* --log: since efb779f (merge, pull: add '--(no-)log' command line
option, 2008-04-06)
* --squash: since 7d0c688 (git-merge --squash, 2006-06-23)
* --commit: since 5072a32 (Teach git-pull about --[no-]ff, --no-squash
and --commit, 2007-10-29)
* --edit: since 8580830 ("git pull" doesn't know "--edit", 2012-02-11)
* --ff, --ff-only: since 5072a32 (Teach git-pull about --[no-]ff,
--no-squash and --commit, 2007-10-29)
* --verify-signatures: since efed002 (merge/pull: verify GPG signatures
of commits being merged, 2013-03-31)
* -s, --strategy: since 60fb5b2 (Use git-merge in git-pull (second
try)., 2005-09-25)
* -X, --strategy-option: since ee2c795 (Teach git-pull to pass
-X<option> to git-merge, 2009-11-25)
* -S, --gpg-sign: since ea230d8 (pull: add the --gpg-sign option.,
2014-02-10)
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7f87aff (Teach/Fix pull/fetch -q/-v options, 2008-11-15) taught git-pull
to accept the verbosity -v and -q options and pass them to git-fetch and
git-merge.
Re-implement support for the verbosity flags by adding it to the options
list and introducing argv_push_verbosity() to push the flags into the
argv array used to execute git-fetch and git-merge.
9839018 (fetch and pull: learn --progress, 2010-02-24) and bebd2fd
(pull: propagate --progress to merge, 2011-02-20) taught git-pull to
accept the --progress option and pass it to git-fetch and git-merge.
Use OPT_PASSTHRU() implemented earlier to pass the "--[no-]progress"
command line options to git-fetch and git-merge.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the fetch + merge functionality of git-pull, by first running
git-fetch with the repo and refspecs provided on the command line, then
running git-merge on FETCH_HEAD to merge the fetched refs into the
current branch.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the purpose of rewriting git-pull.sh into a C builtin, implement a
skeletal builtin/pull.c that redirects to $GIT_EXEC_PATH/git-pull.sh if
the environment variable _GIT_USE_BUILTIN_PULL is not defined. This
allows us to fall back on the functional git-pull.sh when running the
test suite for tests that depend on a working git-pull implementation.
This redirection should be removed when all the features of git-pull.sh
have been re-implemented in builtin/pull.c.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is step one of creating a common library for 'for-each-ref',
'branch -l' and 'tag -l'. This creates a header file with the
functions and data structures that ref-filter will provide.
We move the data structures created in for-each-ref to this header
file.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename all the variables called sort to sorting to match the
function/structure name changes made in the previous patch.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename some of the functions and make them publicly available.
This is a preparatory step for moving code from 'for-each-ref'
to 'ref-filter' to make meaningful, targeted services available to
other commands via public APIs.
Functions renamed are:
parse_atom() -> parse_ref_filter_atom()
verify_format() -> verify_ref_format()
get_value() -> get_ref_atom_value()
grab_single_ref() -> ref_filter_handler()
sort_refs() -> ref_array_sort()
show_ref() -> show_ref_array_item()
default_sort() -> ref_default_sorting()
opt_parse_sort() -> parse_opt_ref_sorting()
cmp_ref_sort() -> cmp_ref_sorting()
Rename 'struct ref_sort' to 'struct ref_sorting' in this context.
Based-on-patch-by: Jeff King <peff@peff.net>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce and implement 'ref_array_clear()' which will free
all allocated memory for 'ref_array'.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce 'ref_filter_cbdata' which will hold 'ref_filter'
(conditions to filter the refs on) and 'ref_array' (the array
of ref_array_items). Modify the code to use these new structures.
This is a preparatory patch to eventually move code from 'for-each-ref'
to 'ref-filter' and make it publicly available.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename 'refinfo' to 'ref_array_item' as a preparatory step for
introduction of new structures in the forthcoming patch.
Re-order the fields in 'ref_array_item' so that refname can be
eventually converted to a FLEX_ARRAY.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 'grab_single_ref()' remove the extra count variable 'cnt' and
use the variable 'grab_cnt' of structure 'grab_ref_cbdata' directly
instead.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract two helper functions out of grab_single_ref(). Firstly,
new_refinfo() which is used to allocate memory for a new refinfo
structure and copy the objectname, refname and flag to it.
Secondly, match_name_as_path() which when given an array of patterns
and the refname checks if the refname matches any of the patterns
given while the pattern is a pathname, also supports wildcard
characters.
This is a preperatory patch for restructuring 'for-each-ref' and
eventually moving most of it to 'ref-filter' to provide the
functionality to similar commands via public API's.
Helped-by: Junio C Hamano <gitster@pobox.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to have grafts or replace refs for specific use-cases while
keeping the default "view" of the repository pristine (or with a different
set of grafts/replace refs).
It is possible to use a different graft file with GIT_GRAFT_FILE, but while
replace refs are more powerful, they don't have an equivalent override.
Add a GIT_REPLACE_REF_BASE environment variable to control where git is
going to look for replace refs.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --patch or pathspecs are passed to git checkout, the working tree
will not be switching branch, so there's no need to check if the branch
that we are running checkout on is already checked out.
Original-patch-by: Spencer Baugh <sbaugh@catern.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 45e8a74 (has_sha1_file: re-check pack directory before
giving up, 2013-08-30), we spend extra effort for
has_sha1_file to give the right answer when somebody else is
repacking. Usually this effort does not matter, because
after finding that the object does not exist, the next step
is usually to die().
However, some code paths make a large number of
has_sha1_file checks which are _not_ expected to return 1.
The collision test in index-pack.c is such a case. On a
local system, this can cause a performance slowdown of
around 5%. But on a system with high-latency system calls
(like NFS), it can be much worse.
This patch introduces a "quick" flag to has_sha1_file which
callers can use when they would prefer high performance at
the cost of false negatives during repacks. There may be
other code paths that can use this, but the index-pack one
is the most obviously critical, so we'll start with
switching that one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, if a reflog entry's old or new SHA-1 was not resolvable to
an object, that SHA-1 was silently ignored. Instead, report such cases
as errors.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New function, extracted from fsck_handle_reflog_ent(). The extra
is_null_sha1() test for the new reference is currently unnecessary, as
reflogs are deleted when the reference itself is deleted. But it
doesn't hurt, either.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for_each_ref() callback functions were taught to name the objects
not with "unsigned char sha1[20]" but with "struct object_id".
* bc/object-id: (56 commits)
struct ref_lock: convert old_sha1 member to object_id
warn_if_dangling_symref(): convert local variable "junk" to object_id
each_ref_fn_adapter(): remove adapter
rev_list_insert_ref(): remove unneeded arguments
rev_list_insert_ref_oid(): new function, taking an object_oid
mark_complete(): remove unneeded arguments
mark_complete_oid(): new function, taking an object_oid
clear_marks(): rewrite to take an object_id argument
mark_complete(): rewrite to take an object_id argument
send_ref(): convert local variable "peeled" to object_id
upload-pack: rewrite functions to take object_id arguments
find_symref(): convert local variable "unused" to object_id
find_symref(): rewrite to take an object_id argument
write_one_ref(): rewrite to take an object_id argument
write_refs_to_temp_dir(): convert local variable sha1 to object_id
submodule: rewrite to take an object_id argument
shallow: rewrite functions to take object_id arguments
handle_one_ref(): rewrite to take an object_id argument
add_info_ref(): rewrite to take an object_id argument
handle_one_reflog(): rewrite to take an object_id argument
...
Introduce <branch>@{push} short-hand to denote the remote-tracking
branch that tracks the branch at the remote the <branch> would be
pushed to.
* jk/at-push-sha1:
for-each-ref: accept "%(push)" format
for-each-ref: use skip_prefix instead of starts_with
sha1_name: implement @{push} shorthand
sha1_name: refactor interpret_upstream_mark
sha1_name: refactor upstream_mark
remote.c: add branch_get_push
remote.c: return upstream name from stat_tracking_info
remote.c: untangle error logic in branch_get_upstream
remote.c: report specific errors from branch_get_upstream
remote.c: introduce branch_get_upstream helper
remote.c: hoist read_config into remote_get_1
remote.c: provide per-branch pushremote name
remote.c: hoist branch.*.remote lookup out of remote_get_1
remote.c: drop "remote" pointer from "struct branch"
remote.c: refactor setup of branch->merge list
remote.c: drop default_remote_name variable
Error messages from "git branch" called remote-tracking branches as
"remote branches".
* dl/branch-error-message:
branch: do not call a "remote-tracking branch" a "remote branch"
