Contains the following post-0.99.7b fixes:
- rsh.c string termination fix by H. Peter Anvin
- further fetch fixes by Sergey Vlasov
- diff-tree documentation by Robert Watson.
- 'git diff --cached' synonymous to 'git diff --cached HEAD'.
- subprocess.py licensing status clarification.
Signed-off-by: Junio C Hamano <junkio@cox.net>
PSF license explicitly states the files in Python distribution is
compatible with GPL, and upstream clarified the licensing terms by
shortening its file header. This version is a verbatim copy from
release24-maint branch form Python CVS.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The change I made to rsh.c would leave the string unterminated under
certain conditions, which unfortunately always applied! This patch
fixes this. For some reason this never bit on i386 or ppc, but bit me
on x86-64.
Fix situation where the buffer was not properly null-terminated.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the source repository was packed, and git-local-fetch needed to
fetch a pack file, it spewed a misleading error message about not
being able to find the unpacked object. Fixed by adding the
warn_if_not_exists argument to copy_file(), which controls printing
of error messages in case the source file does not exist.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git-local-fetch -s" did not work with a packed repository, because
symlink() happily created a link to a non-existing object file,
therefore fetch_file() always returned success, and fetch_pack() was
not called. Fixed by calling stat() before symlink() to ensure the
file really exists.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After open() failure, copy_file() called close(ifd) with ifd == -1
(harmless, but causes Valgrind noise). The same thing was possible
for the destination file descriptor.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
setup_indices() did not check the return value of opendir(), and
did not have a corresponding closedir() call.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fetch code does not need object ref lists; by disabling them we
can save some time and memory.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document the best way to show the change introduced by a
commit, based on the suggestion by Linus on the list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When making changes to different files (i.e. dirty working tree) and
committing logically separate changes in groups, often it is necessary
to run 'git diff --cached HEAD' to make sure that the changes being
committed makes sense. Saying 'git diff --cached' by mistake gives
rather uninformative error message from git-diff-files complaining it
does not understand --cached flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The call to parse_object() in process() is not actually needed - if
the object type is unknown, parse_object() will be called by loop();
if the type is known, the object will be parsed by the appropriate
process_*() function.
After this change blobs which exist locally are no longer parsed,
which gives about 2x CPU usage improvement; the downside is that there
will be no warnings for existing corrupted blobs, but detecting such
corruption is the job of git-fsck-objects, not the fetch programs.
Newly fetched objects are still checked for corruption in http-fetch.c
and ssh-fetch.c (local-fetch.c does not seem to do it, but the removed
parse_object() call would not be reached for new objects anyway).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove holes left after deleting flags, and use shifts to emphasize
that flags are single bits.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the SEEN flag was not set, the TO_SCAN flag cannot be set,
therefore testing it is pointless.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It does not matter if we call prefetch() or set the TO_SCAN flag before
or after adding the object to process_queue. However, doing it before
object_list_insert() allows us to kill 3 lines of duplicated code.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The TO_FETCH flag also became redundant after adding the SEEN flag -
it was set and checked in process() to prevent adding the same object
to process_queue multiple times, but now SEEN guards against this.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After adding the SEEN flag, the SCANNED flag became obviously
redundant - each object can get into process_queue through process()
only once, and therefore multiple calls to process_object() for the
same object are not possible.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The process() function is very often called multiple times for the
same object (because lots of trees refer to the same blobs), but did
not have a fast check for this, therefore a lot of useless calls to
has_sha1_file() and parse_object() were made before discovering that
nothing needs to be done.
This patch adds the SEEN flag which is used in process() to make it
look at each object only once. When testing git-local-fetch on the
repository of GIT, this gives a 14x improvement in CPU usage (mainly
because the redundant calls to parse_object() are now avoided -
parse_object() always unpacks and parses the object data, even if it
was already parsed before).
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In all places where process() is called except the one in pull() (which
is executed only once) the pointer to the object is already available,
so pass it as the argument to process() instead of sha1 and avoid an
unneeded call to lookup_object_type().
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we check the optional objects/info/alternates file at the remote
repository, we forgot to really squelch error message from rsync.
Not having that file is not a crime.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 89d844d084 commit)
Randal L. Schwartz noticed that 'make install' does not rebuild what
is installed. Make the 'install' rule depend on 'man'.
I noticed also 'touch' of the source files were used to express include
dependencies, which is a no-no. Rewrite it to do dependencies properly,
and add missing include dependencies while we are at it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unlike write_sha1_file() that tries to create the object file in a
temporary location and then move it to the final location, fetch_object
could have been interrupted in the middle, leaving a corrupt file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The author of the file we stole from Python 2.4 distribution, Peter
Astrand <astrand@lysator.liu.se>, OK'ed to add this at the end of the
licensing terms section of the file:
Use of this file within git is permitted under GPLv2.
Signed-off-by: Junio C Hamano <junkio@cox.net>
get_sha1() would not do sha1 completion of short SHA1's when they were
part of a more complex expression. So doing
git-rev-parse 727132834e6be48a93c1bd6458a29d474ce7d5d5^
would work, and return 87c6aeb4ef. But using
the shorthand version
git-rev-list 72713^
wouldn't work.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We may end up trying to print a commit we do not actually have but we
know about its existence only because another commit we do have refers
to it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from b204feab9371040982d2c60611925e7693106c84 commit)
The base target directory for the templates copying was initialized
to git_dir, but git_dir[len] is not zero but / at the time we do the
initialization. This is not what we want for our target directory string
since we pass it to mkdir(), so make it zero-terminated manually.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We sometimes do not install git-send-email nor git-http-pull; do not
unconditionally create symlinks to them.
Signed-off-by: Patrick Mauritz <oxygene@studentenbude.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The target to check out does not need to be a branch. The _result_ of the
checkout needs to be a branch. Don't confuse the two, and then insult the
user.
Insulting is ok, but I personally get really pissed off is a tool is both
confused and insulting. At least be _correct_ and insulting.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some C libraries lack strcasestr(); add a stupid replacement
to help folks with such.
[jc: original Linus posting, updated with his "also need <ctype.h>",
updated further with a fix from Joachim B Haga <cjhaga@fys.uio.no>"]
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes git-update-index error reporting much less confusing. The
user will know what went wrong with better precision, and will be given
a hopefully less confusing advice.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes everybodys favourite complaint about "git add", namely that it
doesn't take directories.
We use "git-ls-files --others" to generate an arbitrary list of filenames,
and thus also automatically honor ignore-files while we're at it.
Side note: there's a lot of room for improvement here. In particular, if
we have a long list of filenames (importing a big archive), this will just
do a big stupid for-loop and add them one at a time. Maybe it should use
generate-list | xargs -0 git-update-idex --add --
instead.
Also, I think we should have a default ignore list if we don't find a
.git/info/exclude file. Ignoring "*.o" and ".*" by default would probably
be the right thing to do.
But I think this is a good first step.
Use the "-n" flag to just show the list of files to be added without
adding them.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Especially when you're deep inside the git repository, it's not all that
trivial for scripts to figure out where GIT_DIR is if it isn't set.
So add a flag to git-rev-parse to show where it is, since it will have
figured it out anyway.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows the remote repository to refer to additional repositories
in a file objects/info/http-alternates or
objects/info/alternates. Each line may be:
a relative path, starting with ../, to get from the objects directory
of the starting repository to the objects directory of the added
repository.
an absolute path of the objects directory of the added repository (on
the same server).
(only in http-alternates) a full URL of the objects directory of the
added repository.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The recent safety check to trust only the commits we have made
things impossibly slow and turn out to waste a lot of memory.
This commit fixes it with the following improvements:
- mark already scanned objects and avoid rescanning the same
object again;
- free the tree entries when we have scanned the tree entries;
this is the same as b0d8923ec0
which reduced memory usage by rev-list;
- plug memory leak from the object_list dequeuing code;
- use the process_queue not just for fetching but for scanning,
to make things tail recursive to avoid deep recursion; the
deep recursion was especially prominent when we cloned a big
pack.
- avoid has_sha1_file() call when we already know we do not have
that object.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using "git repack -a -d" can destroy your git archive if you use it
twice in succession, because the new pack can be called the same as
the old pack. Found by Linus.
Signed-off-by: Junio C Hamano <junkio@cox.net>
As a convenience measure, 'bisect bad' or 'bisect good' automatically
does 'bisect next' when it knows it can, but the result of that test
to see if it can was leaking through as the exit code from the whole
thing, which was bad. Noticed by Anton Blanchard.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This tries .../objects/info/http-alternates and then
.../objects/info/alternates, looking for a file which specifies where
else to download objects and packs from.
It currently only supports absolute paths, and doesn't support full URLs.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
