Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the last parameter of recv_sideband, by which the callers
told which channel bands #2 and #3 should be written to.
Sayeth Shawn Pearce:
The definition of the streams in the current sideband protocol
are rather well defined for the one protocol that uses it,
fetch-pack/receive-pack:
stream #1: pack data
stream #2: stderr messages, progress, meant for tty
stream #3: abort message, remote is dead, goodbye!
Since both callers of the function passed 2 for the parameter, we hereby
remove it and send bands #2 and #3 to stderr explicitly using fprintf.
This has the nice side-effect that these two streams pass through our
ANSI emulation layer on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Junio, disallow the flags PARSE_OPT_KEEP_UNKNOWN and
PARSE_OPT_STOP_AT_NON_OPTION to be turned on at the same time, as a
value of an unknown option could be mistakenly classified as a
non-option, stopping the parser early. E.g.:
git cmd --known --unknown value arg0 arg1
The parser should have stopped at "arg0", but it already stops at
"value".
This patch makes parse_options() die if the two flags are used in
combination.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For repositories laid out like the following:
[svn-remote "svn"]
url = http://foo.com/svn/repos/bar
fetch = myproject/trunk:refs/remotes/trunk
branches = bar/myproject/branches/*:refs/remotes/*
tags = bar/myproject/tags/*:refs/remotes/tags/*
The "bar" component above is considered the intermediate path
and was not handled correctly.
Signed-off-by: Michael Lai <myllai@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Replace the hand-rolled parsers that find and remove --remote and --exec
by a parseopt parser that also handles --output.
All three options only have a meaning if no remote server is used or on
the local side. They must be rejected by upload-archive and should not
be sent to the server by archive.
We can't use a single parser for both remote and local side because the
remote end possibly understands a different set of options than the
local side. A local parser would then wrongly accuse options valid on
the other side as being incorrect.
This patch implements a very forgiving parser that understands only the
three options mentioned above. All others are passed to the normal,
complete parser in archive.c (running either locally in archive, or
remotely in upload-archive). This normal parser definition contains
dummy entries for the three options, in order for them to appear in the
help screen.
The parseopt parser allows multiple occurrences of --remote and --exec
unlike the previous one; the one specified last wins. This looseness
is acceptable, I think.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow usagestr to be NULL and don't display any help screen in
this case. This is useful to implement incremental parsers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a parseopt flag, PARSE_OPT_NO_INTERNAL_HELP, that turns off internal
handling of -h, --help and --help-all. This allows the implementation
of custom help option handlers or incremental parsers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a parseopt flag, PARSE_OPT_KEEP_UNKNOWN, that can be used to keep
unknown options in argv, similar to the existing KEEP flags.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
builtin-revert.c: release index lock when cherry-picking an empty commit
document config --bool-or-int
t1300: use test_must_fail as appropriate
cleanup: add isascii()
Documentation: fix badly indented paragraphs in "--bisect-all" description
In addition, ''quote_ref_url'' inserts a slash between the base URL and
remote ref path only if needed. Previously, this insertion wasn't
contingent on the lack of a separating slash.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These weren't used outside and can be safely moved
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables were unused and can be removed safely:
builtin-clone.c::cmd_clone(): use_local_hardlinks, use_separate_remote
builtin-fetch-pack.c::find_common(): len
builtin-remote.c::mv(): symref
diff.c::show_stats():show_stats(): total
diffcore-break.c::should_break(): base_size
fast-import.c::validate_raw_date(): date, sign
fsck.c::fsck_tree(): o_sha1, sha1
xdiff-interface.c::parse_num(): read_some
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When launching "diff --no-index" with a parameter "/dev/null", the MSys
bash converts the "/dev/null" to a "nul", which usually makes sense. But
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users have tabs in their names, oddly enough. This
causes problems when loading the usercache from disk,
as split separates the fields on the wrong tabs. When
fast-import's parse_ident() tries to parse the committer
field, it is unhappy about the unbalanced <..> angle brackets.
It is easy enough to convert the tabs to single spaces.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define GIT_TEST_CLONE_2GB=t if you want the test not to be skipped.
The test works by constructing a repository larger than 2gb, and then
cloning it.
The repository is forced larger than 2gb by setting compression and
delta depth to zero, and then adding just enough unique objects of
a given size.
The objects consist of a running decimal number in ASCII, padded by
spaces. Should that break in the future, e.g. when pack v4 becomes
default, there is a commented-out call to test-genrandom which can be
substituted, but that uses more cycles than the current method.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch, pull, and push didn't know their options. They do now. merge's
options are factored into a variable so they can be shared between
_git_merge and _git_pull
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to complete --strategy was duplicated between _git_rebase and
_git_merge, and is about to gain a third caller (_git_pull). This patch
factors it into its own function.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sverre Rabbelier noticed a completion issue with push:
$ git push ori<tab>
git push origin
$ git push -f ori<tab>
git push -f origin/
Markus Heidelberg pointed out that the issue extends to fetch and pull.
The reason is that the current code naively assumes that if
COMP_CWORD=2, it should complete a remote name, otherwise it should
complete a refspec. This assumption fails if there are any --options.
This patch fixes that issue by instead scanning COMP_CWORDS to see if
the remote has been completed yet (we now assume the first non-dashed
argument is the remote). The new logic is factored into a function,
shared by fetch, pull, and push.
The new function also properly handles '.' as the remote.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When overriding the identifier "stat" so that "struct stat" will be
substituted with "struct _stati64" everywhere, I tried to fix the calls
to the _function_ stat(), too, but I forgot to change the earlier
attempt "stat64" to "_stati64" there.
So, the stat() calls were overridden by calls to _stati64() instead.
Unfortunately, there is a function _stati64() so that I missed that
calls to stat() were not actually overridden by calls to mingw_lstat(),
but t4200-rerere.sh showed the error.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick of an empty commit is done, release the lock
held on the index.
The fix is the same as was applied to similar code in 4271666046.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation is just a pointer to the --bool and --int
options, but it makes sense to at least mention that it
exists.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the tests checked the exit code manually, even going
so far as to run git outside of the test_expect harness.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a standard definition of isascii() and use it to replace an open
coded high-bit test in pretty.c. While we're there, write the ESC
char as the more commonly used '\033' instead of as 0x1b to enhance
its grepability.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/pretty-format:
bash completion: add --format= and --oneline options for "git log"
Add tests for git log --pretty, --format and --oneline.
Add --oneline that is a synonym to "--pretty=oneline --abbrev-commit"
Give short-hands to --pretty=tformat:%formatstring
Add --format that is a synonym to --pretty
* js/send-email:
send-email: add --confirm option and configuration setting
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
* tp/completion:
Fixup: Add bare repository indicator for __git_ps1
Add bare repository indicator for __git_ps1
completion: More fixes to prevent unbound variable errors
completion: Better __git_ps1 support when not in working directory
completion: Use consistent if [...] convention, not "test"
completion: For consistency, change "git rev-parse" to __gitdir calls
* js/branch-symref:
add basic branch display tests
branch: clean up repeated strlen
Avoid segfault with 'git branch' when the HEAD is detached
builtin-branch: improve output when displaying remote branches
Conflicts:
builtin-branch.c
* js/valgrind:
valgrind: do not require valgrind 3.4.0 or newer
test-lib: avoid assuming that templates/ are in the GIT_EXEC_PATH
Tests: let --valgrind imply --verbose and --tee
Add a script to coalesce the valgrind outputs
t/Makefile: provide a 'valgrind' target
test-lib.sh: optionally output to test-results/$TEST.out, too
Valgrind support: check for more than just programming errors
valgrind: ignore ldso and more libz errors
Add valgrind support in test scripts
The type 'off_t' should be used everywhere so that the bit-depth of that
type can be adjusted in the standard C library, and you just need to
recompile your program to benefit from the extended precision.
Only that it was not done that way in the MS runtime library.
This patch reroutes off_t to off64_t and provides the other necessary
changes so that finally, clones larger than 2 gigabyte work on Windows
(provided you are on a file system that allows files larger than 2gb).
Initial patch by Sickboy <sb@dev-heaven.net>.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Including passing parameters to the programs, and running more
complicated checks without requiring a seperate shell script.
Signed-off-by: John Tapsell <johnflux@gmail.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Certain remote commands, when asked to do something in a
particular directory that was not actually a git repository,
would say "unable to chdir or not a git archive". The
"chdir" bit is an unnecessary detail, and the term "git
archive" is much less common these days than "git repository".
So let's switch them all to:
fatal: '%s' does not appear to be a git repository
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
