Describe how 'add' sets the submodule's logical name, which is used in
the configuration entry names.
Clarify that 'init' only sets up the configuration entries for
submodules that have already been added elsewhere. Describe that
<path> arguments limit the submodules that are configured.
Signed-off-by: Dale Worley <worley@ariadne.com>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reimplement commit 4b7f53da on top of the new simplify-merges
infrastructure, tightening the condition to only consider root parents;
the original version incorrectly dropped parents that were TREESAME to
anything.
Original log message follows.
The merge simplification rule stated in 6546b59 (revision traversal:
show full history with merge simplification, 2008-07-31) still
treated merge commits too specially. Namely, in a history with this
shape:
---o---o---M
/
x---x---x
where three 'x' were on a history completely unrelated to the main
history 'o' and do not touch any of the paths we are following, we
still said that after simplifying all of the parents of M, 'x'
(which is the leftmost 'x' that rightmost 'x simplifies down to) and
'o' (which would be the last commit on the main history that touches
the paths we are following) are independent from each other, and
both need to be kept.
That is incorrect; when the side branch 'x' never touches the paths,
it should be removed to allow M to simplify down to the last commit
on the main history that touches the paths.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When simplifying an odd merge, such as one that used "-s ours", we may
find ourselves TREESAME to apparently redundant parents. Prevent
simplify_merges() from removing every TREESAME parent; if this would
happen reinstate the first TREESAME parent - the one that the default
log would have followed.
This avoids producing a totally disjoint history from the default log
when the default log is a better explanation of the end result, and aids
visualisation of odd merges.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
History simplification previously always treated merges as TREESAME
if they were TREESAME to any parent.
While this was consistent with the default behaviour, this could be
extremely unhelpful when searching detailed history, and could not be
overridden. For example, if a merge had ignored a change, as if by "-s
ours", then:
git log -m -p --full-history -Schange file
would successfully locate "change"'s addition but would not locate the
merge that resolved against it.
Futher, simplify_merges could drop the actual parent that a commit
was TREESAME to, leaving it as a normal commit marked TREESAME that
isn't actually TREESAME to its remaining parent.
Now redefine a commit's TREESAME flag to be true only if a commit is
TREESAME to _all_ of its parents. This doesn't affect either the default
simplify_history behaviour (because partially TREESAME merges are turned
into normal commits), or full-history with parent rewriting (because all
merges are output). But it does affect other modes. The clearest
difference is that --full-history will show more merges - sufficient to
ensure that -m -p --full-history log searches can really explain every
change to the file, including those changes' ultimate fate in merges.
Also modify simplify_merges to recalculate TREESAME after removing
a parent. This is achieved by storing per-parent TREESAME flags on the
initial scan, so the combined flag can be easily recomputed.
This fixes some t6111 failures, but creates a couple of new ones -
we are now showing some merges that don't need to be shown.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation of --boundary uses the term "uninteresting", which is
not used or defined anywhere else in the documentation. This is
unhelpful and confusing to anyone who hasn't seen the UNINTERESTING
flag in the source code.
Change to use "excluded", as per revisions.txt.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the example given, P is not TREESAME to E. This doesn't affect the
current result, but it will matter when we change behaviour.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we run a regular "git fetch" without arguments, we
update the tracking refs according to the configured
refspec. However, when we run "git fetch origin master" (or
"git pull origin master"), we do not look at the configured
refspecs at all, and just update FETCH_HEAD.
We miss an opportunity to update "refs/remotes/origin/master"
(or whatever the user has configured). Some users find this
confusing, because they would want to do further comparisons
against the old state of the remote master, like:
$ git pull origin master
$ git log HEAD...origin/master
In the currnet code, they are comparing against whatever
commit happened to be in origin/master from the last time
they did a complete "git fetch". This patch will update a
ref from the RHS of a configured refspec whenever we happen
to be fetching its LHS. That makes the case above work.
The downside is that any users who really care about whether
and when their tracking branches are updated may be
surprised.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation erroneously used the same wording for both fetch and
pull, stating that something will be merged even in git-fetch(1).
In addition, saying that "<ref> is equivalent to <ref>:" doesn't
really help anyone who still needs to read manpages. Clarify what is
actually going on.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People not familiar with AsciiDoc may not realize they are
supposed to update *.txt files and not *.html/*.1 files when
preparing patches to the project.
Signed-off-by: Dale Worley <worley@ariadne.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently and not so recently, we made sure that log/grep type operations
use textconv filters when a userfacing diff would do the same:
ef90ab6 (pickaxe: use textconv for -S counting, 2012-10-28)
b1c2f57 (diff_grep: use textconv buffers for add/deleted files, 2012-10-28)
0508fe5 (combine-diff: respect textconv attributes, 2011-05-23)
"git grep" currently does not use textconv filters at all, that is
neither for displaying the match and context nor for the actual grepping,
even when requested by --textconv.
Introduce an option "--textconv" which makes git grep use any configured
textconv filters for grepping and output purposes. It is off by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff_opt infrastructure sets flags based on defaults and command
line options. It is impossible to tell whether a flag has been set
as a default or on explicit request. Update the structure so that
this detection is possible:
* Add an extra "opt->touched_flags" that keeps track of all the
fields that have been touched by DIFF_OPT_SET and DIFF_OPT_CLR.
* You may continue setting the default values to the flags, like
commands in the "log" family do in cmd_log_init_defaults(), but
after you finished setting the defaults, you clear the
touched_flags field;
* And then you let the usual callchain call diff_opt_parse(),
allowing the opt->flags be set or unset, while keeping track of
which bits the user touched;
* There is an optional callback "opt->set_default" that is called
at the very beginning to let you inspect touched_flags and update
opt->flags appropriately, before the remainder of the diffcore
machinery is set up, taking the opt->flags value into account.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 1.8.2.3
t5004: avoid using tar for checking emptiness of archive
t5004: ignore pax global header file
mergetools/kdiff3: do not use --auto when diffing
transport-helper: trivial style cleanup
The SVN::Fetcher module is now able to filter for inclusion as well
as exclusion (as used by --ignore-path). Also added tests, documentation
changes and git completion script.
If you have an SVN repository with many top level directories and you
only want a git-svn clone of some of them then using --ignore-path is
difficult as it requires a very long regexp. In this case it's much
easier to filter for inclusion.
[ew: remove trailing whitespace]
Signed-off-by: Paul Walmsley <pjwhams@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Typing 'HEAD' is tedious, especially when we can use '@' instead.
The reason for choosing '@' is that it follows naturally from the
ref@op syntax (e.g. HEAD@{u}), except we have no ref, and no
operation, and when we don't have those, it makes sens to assume
'HEAD'.
So now we can use 'git show @~1', and all that goody goodness.
Until now '@' was a valid name, but it conflicts with this idea, so
let's make it invalid. Probably very few people, if any, used this name.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually "foo:bar" is interpreted as an ssh url. This patch allows to
clone from such paths by putting at least one slash before the colon
(i.e. /path/to/foo:bar or just ./foo:bar).
file://foo:bar should also work, but local optimizations are off in
that case, which may be unwanted. While at there, warn the users about
--local being ignored in this case.
Reported-by: William Giokas <1007380@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/remote-tighten-commandline-parsing:
remote: 'show' and 'prune' can take more than one remote
remote: check for superfluous arguments in 'git remote add'
remote: add a test for extra arguments, according to docs
-C takes a commit object, not a file.
Signed-off-by: Anders Granskogen Bjørnstad <andersgb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/remote-tighten-commandline-parsing:
remote: 'show' and 'prune' can take more than one remote
remote: check for superfluous arguments in 'git remote add'
remote: add a test for extra arguments, according to docs
When the client sends a 'shallow' line for an object that the server does
not have, the server currently dies with the error: "did not find object
for shallow <obj-id>". The client may have truncated the history at
the commit by fetching shallowly from a different server, or the commit
may have been garbage collected by the server. In either case, this
unknown commit is not relevant for calculating the pack that is to be
sent and can be safely ignored, and it is not used when recomputing where
the updated history of the client is cauterised.
The documentation in technical/pack-protocol.txt has been updated to
remove the restriction that "Clients MUST NOT mention an obj-id which it
does not know exists on the server". This requirement is not realistic
because clients cannot know whether an object has been garbage collected
by the server.
Signed-off-by: Michael Heemskerk <mheemskerk@atlassian.com>
Reviewed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As promised in 0fa2eb530f (add: warn when -u or -A is used without
pathspec, 2013-01-28), in Git 2.0, "git add -u/-A" that is run
without pathspec in a subdirectory updates all updated paths in the
entire working tree, not just the current directory and its
subdirectories.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update documentation for "log" and "shortlog".
* rr/shortlog-doc:
builtin/shortlog.c: make usage string consistent with log
builtin/log.c: make usage string consistent with doc
git-shortlog.txt: make SYNOPSIS match log, update OPTIONS
git-log.txt: rewrite note on why "--" may be required
git-log.txt: generalize <since>..<until>
git-log.txt: order OPTIONS properly; move <since>..<until>
revisions.txt: clarify the .. and ... syntax
git-shortlog.txt: remove (-h|--help) from OPTIONS
The wording for "revision" in the glossary wanted to say it refers
to "commit (noun) as a concept" but it was badly phrased.
This may need further updates to hint that in contexts where it is
clear, the word may refer to an object name, not necessarily a
commit. But the patch as-is is already an improvement.
* jn/glossary-revision:
glossary: a revision is just a commit
Introduce "--ignore-removal" as a synonym to "--no-all" for "git
add", and improve the 2.0 migration warning with it.
* jc/add-ignore-removal:
git add: rephrase -A/--no-all warning
git add: --ignore-removal is a better named --no-all
* jn/gitweb-install-doc:
gitweb/INSTALL: GITWEB_CONFIG_SYSTEM is for backward compatibility
gitweb/INSTALL: Simplify description of GITWEB_CONFIG_SYSTEM
Earlier we added support for --expire=all (or --expire=now) that
considers all crufts, regardless of their age, as eligible for
garbage collection by turning command argument parsers that use
approxidate() to use parse_expiry_date(), but "git prune" used a
built-in parse-options facility OPT_DATE() and did not benefit from
the new function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows remote-helpers to declare they can handle signed tags, and
issue a warning when using those that don't.
* jk/remote-helper-with-signed-tags:
transport-helper: add 'signed-tags' capability
transport-helper: pass --signed-tags=warn-strip to fast-export
fast-export: add --signed-tags=warn-strip mode
"git diff --diff-algorithm=algo" was understood by the command line
parser, but "git diff --diff-algorithm algo" was not.
* jk/diff-algo-finishing-touches:
diff: allow unstuck arguments with --diff-algorithm
git-merge(1): document diff-algorithm option to merge-recursive
The 'git remote show' and 'prune' subcommands are documented as taking
only a single remote name argument, but that is not the case; they
will simply iterate the action over all remotes given. Update the
documentation and tests to match.
With the last user of the -f flag gone, we also remove the code
supporting it.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pretty-printing body of the commit that is stored in non UTF-8
encoding did not work well. The early part of this series fixes
it. And then it adds %C(auto) specifier that turns the coloring on
when we are emitting to the terminal, and adds column-aligning
format directives.
* nd/pretty-formats:
pretty: support %>> that steal trailing spaces
pretty: support truncating in %>, %< and %><
pretty: support padding placeholders, %< %> and %><
pretty: add %C(auto) for auto-coloring
pretty: split color parsing into a separate function
pretty: two phase conversion for non utf-8 commits
utf8.c: add reencode_string_len() that can handle NULs in string
utf8.c: add utf8_strnwidth() with the ability to skip ansi sequences
utf8.c: move display_mode_esc_sequence_len() for use by other functions
pretty: share code between format_decoration and show_decorations
pretty-formats.txt: wrap long lines
pretty: get the correct encoding for --pretty:format=%e
pretty: save commit encoding from logmsg_reencode if the caller needs it
Fixes a handful of issues in the code to traverse working tree to
find untracked and/or ignored files, cleans up and optimizes the
codepath in general.
* kb/status-ignored-optim-2:
dir.c: git-status --ignored: don't scan the work tree twice
dir.c: git-status --ignored: don't scan the work tree three times
dir.c: git-status: avoid is_excluded checks for tracked files
dir.c: replace is_path_excluded with now equivalent is_excluded API
dir.c: unify is_excluded and is_path_excluded APIs
dir.c: move prep_exclude
dir.c: factor out parts of last_exclude_matching for later reuse
dir.c: git-clean -d -X: don't delete tracked directories
dir.c: make 'git-status --ignored' work within leading directories
dir.c: git-status --ignored: don't list empty directories as ignored
dir.c: git-ls-files --directories: don't hide empty directories
dir.c: git-status --ignored: don't list empty ignored directories
dir.c: git-status --ignored: don't list files in ignored directories
dir.c: git-status --ignored: don't drop ignored directories
Make "git add <pathspec>..." notice paths that have been removed
from the working tree, i.e. the same as "git add -A <pathspec>...".
Given that "git add <pathspec>" is to update the index with the
state of the named part of the working tree as a whole, it makes it
more intuitive, and also makes it possible to simplify the advice we
give while marking the paths the user finished resolving conflicts
with. We used to say "to record removal as a resolution, remove the
path from the working tree and say 'git rm'; for all other cases,
edit the path in the working tree and say 'git add'", but we can now
say "update the path in the working tree and say 'git add'" instead.
As promised, this merges the temporary update_files_in_cache() helper
function back to add_files_to_cache() function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the historical context of "git add --all ." that pays attention
to "all kinds of changes" (implying "without ignoring removals"),
the option to countermand it "--no-all" may have made sense, but
because we will be making "--all" the default when a pathspec is
given, it makes more sense to rename the option to a more explicit
"--ignore-removal". The "--all" option naturally becomes its
negation, "--no-ignore-removal".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ta/glossary:
glossary: improve definitions of refspec and pathspec
The name of the hash function is "SHA-1", not "SHA1"
glossary: improve description of SHA-1 related topics
glossary: remove outdated/misleading/irrelevant entries
Improve documentation to illustrate "push authenticated, fetch
anonymous" configuration for smart HTTP servers.
* jk/doc-http-backend:
doc/http-backend: match query-string in apache half-auth example
doc/http-backend: give some lighttpd config examples
doc/http-backend: clarify "half-auth" repo configuration
Preparatory steps to make "git add <pathspec>" take notice of
removed paths that match <pathspec> by default in Git 2.0.
* 'jc/add-2.0-delete-default' (early part):
git add: rephrase the "removal will cease to be ignored" warning
git add: rework the logic to warn "git add <pathspec>..." default change
git add: start preparing for "git add <pathspec>..." to default to "-A"
builtin/add.c: simplify boolean variables
Make the initial "sparse" selection of the paths more sticky across
"git checkout".
* nd/checkout-keep-sparse:
checkout: add --ignore-skip-worktree-bits in sparse checkout mode
This option is a remnant of an earlier log -L version, and not
currently implemented. Remove it until (if at all) it is implemented
again.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are broadly two problems with the current SYNOPSIS. First, it
completely omits the detail that paths can be specified. Second, it
attempts to list all the options: this is futile as, in addition to
the options unique to it, it accepts all the options that git-rev-list
accepts. In fixing these problems, make the SYNOPSIS consistent with
that in git-log.txt. Also add the corresponding sections to OPTIONS.
Save adding the options from rev-list-options.txt for a later patch,
as it requires some work to pick out the options that are relevant to
shortlog.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In its current form, the note talks about separating options from
"branch names" and "refnames" in the same sentence. This is entirely
inaccurate, as <revision range> need not be a set of branch names or
ref names. Rewrite it to use the word "revision range", to be
consistent with the SYNOPSIS.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'<since>..<until>' is misleading, as there are many other forms that
'git log' can accept as an argument. Replace it with <revision range>,
referring to the section "Specifying Ranges" in revisions.txt, and
rewrite the section appropriately.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section lists <since>..<until> as the first item, but this
is inconsistent with the ordering in SYNOPSIS. Move it down until it
appears just before [[--] <path>...].
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In <rev1>..<rev2> and <rev1>...<rev2>, if either <rev1> or <rev2> is
omitted, it defaults to 'HEAD'. Add this detail to the document.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The second paragraph of the added description for the -L option
"<start> and <end> can take one of these forms:", and the list of
forms that follow the headline, were indented one level too short,
due to the missing "+" to signal that the next paragraph continues
the previous one.
Also "You can specify this option more than once" is about the -L
option, not about its various forms of starting and ending points.
Move it to the end of the main text.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current definition of 'revision' sounds like it is saying that a
revision is a tree object. In reality it is just a commit.
This should be especially useful for people used to other revision
control systems trying to see how familiar concepts translate into git
terms.
Reported-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ta/glossary:
glossary: improve definitions of refspec and pathspec
The name of the hash function is "SHA-1", not "SHA1"
glossary: improve description of SHA-1 related topics
glossary: remove outdated/misleading/irrelevant entries
Improve documentation to illustrate "push authenticated, fetch
anonymous" configuration for smart HTTP servers.
* jk/doc-http-backend:
doc/http-backend: match query-string in apache half-auth example
doc/http-backend: give some lighttpd config examples
doc/http-backend: clarify "half-auth" repo configuration
The definition of a remote-tracking branch in the glossary have been
out-of-date for a while (by e.g. referring to "Pull:" from old-style
$GIT_DIR/remotes files).
Also, the preceding patches have formalized that a remote-tracking branch
must match a configured refspec in order to be usable as an upstream.
This patch rewrites the paragraph on remote-tracking branches accordingly.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The DWIM mode of checkout allows you to run "git checkout foo" when there
is no existing local ref or path called "foo", and there is exactly _one_
remote with a remote-tracking branch called "foo". Git will automatically
create a new local branch called "foo" using the remote-tracking "foo" as
its starting point and configured upstream.
For example, consider the following unconventional (but perfectly valid)
remote setup:
[remote "origin"]
fetch = refs/heads/*:refs/remotes/origin/*
[remote "frotz"]
fetch = refs/heads/*:refs/remotes/frotz/nitfol/*
Case 1: Assume both "origin" and "frotz" have remote-tracking branches called
"foo", at "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo"
respectively. In this case "git checkout foo" should fail, because there is
more than one remote with a "foo" branch.
Case 2: Assume only "frotz" have a remote-tracking branch called "foo". In
this case "git checkout foo" should succeed, and create a local branch "foo"
from "refs/remotes/frotz/nitfol/foo", using remote branch "foo" from "frotz"
as its upstream.
The current code hardcodes the assumption that all remote-tracking branches
must match the "refs/remotes/$remote/*" pattern (which is true for remotes
with "conventional" refspecs, but not true for the "frotz" remote above).
When running "git checkout foo", the current code looks for exactly one ref
matching "refs/remotes/*/foo", hence in the above example, it fails to find
"refs/remotes/frotz/nitfol/foo", which causes it to fail both case #1 and #2.
The better way to handle the above example is to actually study the fetch
refspecs to deduce the candidate remote-tracking branches for "foo"; i.e.
assume "foo" is a remote branch being fetched, and then map "refs/heads/foo"
through the refspecs in order to get the corresponding remote-tracking
branches "refs/remotes/origin/foo" and "refs/remotes/frotz/nitfol/foo".
Finally we check which of these happens to exist in the local repo, and
if there is exactly one, we have an unambiguous match for "git checkout foo",
and may proceed.
This fixes most of the failing tests introduced in the previous patch.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be consistent with the documentation of all the other commands,
remove (-h|--help) from the OPTIONS section.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "--human-readable" aka "-H" option to "git count-objects" to
show various large numbers in Ki/Mi/GiB scaled as necessary.
* ap/strbuf-humanize:
count-objects: add -H option to humanize sizes
strbuf: create strbuf_humanise_bytes() to show byte sizes
This is pretty useful in `%<(100)%s%Cred%>(20)% an' where %s does not
use up all 100 columns and %an needs more than 20 columns. By
replacing %>(20) with %>>(20), %an can steal spaces from %s.
%>> understands escape sequences, so %Cred does not stop it from
stealing spaces in %<(100).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
%>(N,trunc) truncates the right part after N columns and replace the
last two letters with "..". ltrunc does the same on the left. mtrunc
cuts the middle out.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Either %<, %> or %>< standing before a placeholder specifies how many
columns (at least as the placeholder can exceed it) it takes. Each
differs on how spaces are padded:
%< pads on the right (aka left alignment)
%> pads on the left (aka right alignment)
%>< pads both ways equally (aka centered)
The (<N>) follows them, e.g. `%<(100)', to specify the number of
columns the next placeholder takes.
However, if '|' stands before (<N>), e.g. `%>|(100)', then the number
of columns is calculated so that it reaches the Nth column on screen.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not simply convenient over %C(auto,xxx). Some placeholders
(actually only one, %d) do multi coloring and we can't emit a multiple
colors with %C(auto,xxx).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows format-patch --cover-letter to be configurable; the most
notable is the "auto" mode to create cover-letter only for multi
patch series.
* fc/send-email-annotate:
rebase-am: explicitly disable cover-letter
format-patch: trivial cleanups
format-patch: add format.coverLetter configuration variable
log: update to OPT_BOOL
format-patch: refactor branch name calculation
format-patch: improve head calculation for cover-letter
send-email: make annotate configurable
Document where the configuration is read by the git-daemon when its --user
option is used.
* jk/daemon-user-doc:
doc: clarify that "git daemon --user=<user>" option does not export HOME=~user
Document that the "no-" prefix can also be used for non-boolean
options.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the new values that can be used for expiry values where their
use makes sense:
* git reflog expire --expire=[all|never]
* git reflog expire --expire-unreachable=[all|never]
* git gc --prune=all
Other combinations aren't useful and therefore no documentation is
added (even though they are allowed):
* git gc --prune=never
is redundant with "git gc --no-prune"
* git prune --expire=all
is equivalent to providing no --expire option
* git prune --expire=never
is a NOP
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has never worked, since it's inception the code simply skips all
the refs, essentially telling fast-export to do nothing.
Let's at least tell the user what's going on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refspec capability is not only used by 'import', also by
'export', and it's recommended in both.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The *:* refspec doesn't work, and never has, clarify the code and
documentation to reflect that. This in effect reverts commit 9e7673e
(gitremote-helpers(1): clarify refspec behaviour).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Highlight that CONFIG_SYSTEM and /etc/gitweb.conf are meant to be
the fallback configuration file in BUGS section of gitweb.conf
documentation. This will hopefully help people who expect them to
be a common default, which unfortunately came later in the history.
"git diff --diff-algorithm algo" is also understood as "git diff
--diff-algorithm=algo".
* jk/diff-algo-finishing-touches:
diff: allow unstuck arguments with --diff-algorithm
git-merge(1): document diff-algorithm option to merge-recursive
'git-status --ignored' still scans the work tree twice to collect
untracked and ignored files, respectively.
fill_directory / read_directory already supports collecting untracked and
ignored files in a single directory scan. However, the DIR_COLLECT_IGNORED
flag to enable this has some git-add specific side-effects (e.g. it
doesn't recurse into ignored directories, so listing ignored files with
--untracked=all doesn't work).
The DIR_SHOW_IGNORED flag doesn't list untracked files and returns ignored
files in dir_struct.entries[] (instead of dir_struct.ignored[] as
DIR_COLLECT_IGNORED). DIR_SHOW_IGNORED is used all throughout git.
We don't want to break the existing API, so lets introduce a new flag
DIR_SHOW_IGNORED_TOO that lists untracked as well as ignored files similar
to DIR_COLLECT_FILES, but will recurse into sub-directories based on the
other flags as DIR_SHOW_IGNORED does.
In dir.c::read_directory_recursive, add ignored files to either
dir_struct.entries[] or dir_struct.ignored[] based on the flags. Also move
the DIR_COLLECT_IGNORED case here so that filling result lists is in a
common place.
In wt-status.c::wt_status_collect_untracked, use the new flag and read
results from dir_struct.ignored[]. Remove the extra fill_directory call.
builtin/check-ignore.c doesn't call fill_directory, setting the git-add
specific DIR_COLLECT_IGNORED flag has no effect here. Remove for clarity.
Update API documentation to reflect the changes.
Performance: with this patch, 'git-status --ignored' is typically as fast
as 'git-status'.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The exact definition of "refspec" can be found in git-fetch and
git-push manpages. So don't duplicate this here in the glossary.
Actually the definition of "pathspec" should be moved to a separate
file akin to the way it's done with "refspec". But this will only be
wortwhile when there's more to say about it. So for the time being
just improve the first sentence a little bit; fix the indentation of
the first paragraph after the bullet list and remove the one-item
list of magic signatures with its - for the user - unnecessary
introduction of "magic word 'top'".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function.
When used as a programming symbol, we keep "SHA1".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name of the hash function is "SHA-1", not "SHA1".
Also to people who look up "object name" in the glossary,
the details of which hash function is applied on what to
compute "object name" is not important but the fact that the
name is meant to be an unique identifier for the contents
stored in the object is.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise when using 'git branch -vv' it's hard to see them among so
much output.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a remote helper using the 'export' protocol to specify that
it supports signed tags, changing the handing from 'warn-strip' to
'verbatim'.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This issues a warning while stripping signatures from signed tags, which
allows us to use it as default behaviour for remote helpers which cannot
specify how to handle signed tags.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout -- <paths>" is usually used to restore all modified
files in <paths>. In sparse checkout mode, this command is overloaded
with another meaning: to add back all files in <paths> that are
excluded by sparse patterns.
As the former makes more sense for day-to-day use. Switch it to the
default and the latter enabled with --ignore-skip-worktree-bits.
While at there, add info/sparse-checkout to gitrepository-layout.txt
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When setting up a "half-auth" repository in which reads can
be done anonymously but writes require authentication, it is
best if the server can require authentication for both the
ref advertisement and the actual receive-pack POSTs. This
alleviates the need for the admin to set http.receivepack in
the repositories, and means that the client is challenged
for credentials immediately, instead of partway through the
push process (and git clients older than v1.7.11.7 had
trouble handling these challenges).
Since detecting a push during the ref advertisement requires
matching the query string, and this is non-trivial to do in
Apache, we have traditionally punted and instructed users to
just protect "/git-receive-pack$". This patch provides the
mod_rewrite recipe to actually match the ref advertisement,
which is preferred.
While we're at it, let's add the recipe to our test scripts
so that we can be sure that it works, and doesn't get broken
(either by our changes or by changes in Apache).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fact that we don't set $HOME may confuse admins who expect
~<user>/.gitconfig to be used, because that is not what we try to
read. And worse, since 96b9e0e3, a git-daemon started by root is
likely to fail to run at all, as the user we switch to generally
cannot read ~root.
Signed-off-by: Jeff King <peff@peff.net>
Helped-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
eb32d236 introduced the OBJ_OFS_DELTA object that uses a relative offset to
identify the base object instead of the 20-byte SHA1 reference. The pack file
documentation only mentions the SHA1 based reference in its description of the
deltified object entry.
Update the pack format documentation to clarify that the deltified object
representation refers to its base using either a relative negative offset or
the absolute SHA1 identifier.
Signed-off-by: Stefan Saasen <ssaasen@atlassian.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a boolean http.sslTry option which allows to enable AUTH SSL/TLS and
encrypted data transfers when connecting via regular FTP protocol.
Default is false since it might trigger certificate verification errors on
misconfigured servers.
Signed-off-by: Modestas Vainius <modestas@vainius.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Typo fix: replacing it's -> its
t: make PIPE a standard test prerequisite
archive: clarify explanation of --worktree-attributes
t/README: --immediate skips cleanup commands for failed tests
"git help" learned "-g" option to show the list of guides just like
list of commands are given with "-a".
* po/help-guides:
doc: include --guide option description for "git help"
help: mention -a and -g option, and 'git help <concept>' usage.
builtin/help.c: add list_common_guides_help() function
builtin/help.c: add --guide option
builtin/help.c: split "-a" processing into two
Make it a bit clearer that --worktree-attributes is about files in the
working tree (checked out files, possibly changed) and not the current
working directory ($PWD). Link to the ATTRIBUTES section, which has
more details.
Reported-by: Amit Bakshi <ambakshi@gmail.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
check-attr and check-ignore have the potential to deadlock callers
which do not read back the output in real-time. For example, if a
caller writes N paths out and then reads N lines back in, it risks
becoming blocked on write() to check-*, and check-* is blocked on
write back to the caller. Somebody has to buffer; the pipe buffers
provide some leeway, but they are limited.
Thanks to Peff for pointing this out:
http://article.gmane.org/gmane.comp.version-control.git/220534
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If `-n` or `--non-matching` are specified, non-matching pathnames will
also be output, in which case all fields in each output record except
for <pathname> will be empty. This can be useful when running
check-ignore as a background process, so that files can be
incrementally streamed to STDIN, and for each of these files, STDOUT
will indicate whether that file matched a pattern or not. (Without
this option, it would be impossible to tell whether the absence of
output for a given file meant that it didn't match any pattern, or
that the result simply hadn't been flushed to STDOUT yet.)
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The examples in the documentation are all for Apache. Let's
at least cover the basics: an anonymous server, an
authenticated server, and a "half auth" server with
anonymous read and authenticated write.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the http-backend is set up to allow anonymous read but
authenticated write, the http-backend manual suggests
catching only the "/git-receive-pack" POST of the packfile,
not the initial "info/refs?service=git-receive-pack" GET in
which we advertise refs.
This does work and is secure, as we do not allow any write
during the info/refs request, and the information in the ref
advertisement is the same that you would get from a fetch.
However, the configuration required by the server is
slightly more complex. The default `http.receivepack`
setting is to allow pushes if the webserver tells us that
the user authenticated, and otherwise to return a 403
("Forbidden"). That works fine if authentication is turned
on completely; the initial request requires authentication,
and http-backend realizes it is OK to do a push.
But for this "half-auth" state, no authentication has
occurred during the initial ref advertisement. The
http-backend CGI therefore does not think that pushing
should be enabled, and responds with a 403. The client
cannot continue, even though the server would have allowed
it to run if it had provided credentials.
It would be much better if the server responded with a 401,
asking for credentials during the initial contact. But
git-http-backend does not know about the server's auth
configuration (so a 401 would be confusing in the case of a
true anonymous server). Unfortunately, configuring Apache to
recognize the query string and apply the auth appropriately
to receive-pack (but not upload-pack) initial requests is
non-trivial.
The site admin can work around this by just turning on
http.receivepack explicitly in its repositories. Let's
document this workaround.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new humanize() function to print loose objects size, pack size,
and garbage size in verbose mode, or loose objects size in regular mode.
This patch doesn't change the way anything is displayed when the option
is not used.
Also update the documentation.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Humanization of downloaded size is done in the same function as text
formatting in 'process.c'. The code cannot be reused easily elsewhere.
Separate text formatting from size simplification and make the
function public in strbuf so that it can easily be used by other
callers.
We now can use strbuf_humanise_bytes() for both downloaded size and
download speed calculation. One of the drawbacks is that speed will
now look like this when download is stalled: "0 bytes/s" instead of
"0 KiB/s".
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strip @anchor elements in the texinfo output of the documentation,
as a single document created by concatenating our entire manual set
will produce many duplicates that makes newer texinfo unhappy.
* mg/texinfo-5:
Documentation: Strip texinfo anchors to avoid duplicates
Support "pull from one place, push to another place" workflow
better by introducing remote.pushdefault (overrides the "origin"
thing) and branch.*.pushremote (overrides the branch.*.remote).
* rr/triangle:
remote.c: introduce branch.<name>.pushremote
remote.c: introduce remote.pushdefault
remote.c: introduce a way to have different remotes for fetch/push
t5516 (fetch-push): drop implicit arguments from helper functions
t5516 (fetch-push): update test description
remote.c: simplify a bit of code using git_config_string()
Also, add a new option: 'auto', so if there's more than one patch, the
cover letter is generated, otherwise it's not.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people always do --annotate, lets not force them to always type
that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation says that "If no 'refspec' capability is advertised,
there is an implied `refspec *:*`" but this is only the case for the
"import" command.
Since there is a comment in transport-helper.c indicating that this
default is for historical reasons, change the documentation to clarify
that a refspec should always be specified.
Signed-off-by: John Keeping <john@keeping.me.uk>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-export can fail because of some pruned-reference when importing a
mark file.
The problem happens in the following scenario:
$ git fast-export --export-marks=MARKS master
(rewrite master)
$ git prune
$ git fast-export --import-marks=MARKS master
This might fail if some references have been removed by prune
because some marks will refer to no longer existing commits.
git-fast-export will not need these objects anyway as they were no
longer reachable.
We still need to update last_numid so we don't change the mapping
between marks and objects for remote-helpers.
Unfortunately, the mark file should not be rewritten without lost marks
if no new objects has been exported, as we could lose track of the last
last_numid.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "merge/pull" to optionally verify and reject commits that are
not signed properly.
* sg/gpg-sig:
pretty printing: extend %G? to include 'N' and 'U'
merge/pull Check for untrusted good GPG signatures
merge/pull: verify GPG signatures of commits being merged
commit.c/GPG signature verification: Also look at the first GPG status line
Move commit GPG signature verification to commit.c
Commit 07924d4 (diff: Introduce --diff-algorithm command line option
2013-01-16) added diff-algorithm as a parameter to the recursive merge
strategy but did not document it. Do so.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we introduced the concept of "detached HEAD", we made sure that
commands that operate on the history of the current branch "just
work" in that state. They update the HEAD to point at the new
history without affecting any branch when the HEAD is detached, just
like they update the tip of the "current branch" to point at the new
history when HEAD points at a specific branch.
As this is done as the natural extension for these commands, we did
not, we still do not, and we do not want to repeat "A detached HEAD
is updated without affecting any branch" when describing what each
and every one of these commands that operates "on the current branch"
does.
Add a blanket description to the glossary to cover them instead.
The general principle is that operations to update the branch work
on and affect the HEAD, while operations to update the information
about a branch do not.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The explanation for 'git commit --amend' talks about preparing a tree
object, which shouldn't be how user-facing documentation talks about
commit.
Reword it to say it works as usual, but replaces the current commit.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This keeps texinfo 5.x happy. See https://bugs.gentoo.org/464210.
Signed-off-by: Martin von Gagern <Martin.vGagern@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no good way to ask "I have a random string that came from
outside world. I want to turn it into a 40-hex object name while
making sure such an object exists". A new peeling suffix ^{object}
can be used for that purpose, together with "rev-parse --verify".
* jc/sha1-name-object-peeler:
peel_onion(): teach $foo^{object} peeler
peel_onion: disambiguate to favor tree-ish when we know we want a tree-ish
Verification of signed tags were not done correctly when not in C
or en/US locale.
* mg/gpg-interface-using-status:
pretty: make %GK output the signing key for signed commits
pretty: parse the gpg status lines rather than the output
gpg_interface: allow to request status return
log-tree: rely upon the check in the gpg_interface
gpg-interface: check good signature in a reliable way
'git commit -m "$msg"' used to add an extra newline even when
$msg already ended with one.
* bc/commit-complete-lines-given-via-m-option:
Documentation/git-commit.txt: rework the --cleanup section
git-commit: only append a newline to -m mesg if necessary
t7502: demonstrate breakage with a commit message with trailing newlines
t/t7502: compare entire commit message with what was expected
* maint-1.8.1:
Start preparing for 1.8.1.6
git-tag(1): we tag HEAD by default
Fix revision walk for commits with the same dates
t2003: work around path mangling issue on Windows
pack-refs: add fully-peeled trait
pack-refs: write peeled entry for non-tags
use parse_object_or_die instead of die("bad object")
avoid segfaults on parse_object failure
entry: fix filter lookup
t2003: modernize style
name-hash.c: fix endless loop with core.ignorecase=true
The <commit>|<object> argument is actually not explained anywhere
(except implicitly in the description of an unannotated tag). Write a
little explanation, in particular to cover the default.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that the ability to display an individual guide was always
possible. Include this in the update.
Also tell readers how git(1) can be accessed, especially for Git for
Windows users who do not have the 'man' command. Likewise include a
commentary on how to access this page (Catch 22).
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new configuration variable overrides `remote.pushdefault` and
`branch.<name>.remote` for pushes. When you pull from one
place (e.g. your upstream) and push to another place (e.g. your own
publishing repository), you would want to set `remote.pushdefault` to
specify the remote to push to for all branches, and use this option to
override it for a specific branch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new configuration variable defines the default remote to push to,
and overrides `branch.<name>.remote` for all branches. It is useful
in the typical triangular-workflow setup, where the remote you're
fetching from is different from the remote you're pushing to.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old version could be read to mean that the argument has to refer
to a valid object, but that is incorrect:
* the object is not necessarily read (e.g., to check for corruption)
* if the argument is a 40-digit string of hex digits, then it is
accepted whether or not is is the name of an existing object.
So reword the explanation to be less ambiguous.
Also fix the examples involving --verify: to be sure that the argument
refers to a commit (rather than some other kind of object), the
argument has to be suffixed with "^{commit}". This trick is not
possible in the example involving --default, so don't imply that it is
exactly the same as the previous example.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
* da/downcase-u-in-usage:
contrib/mw-to-git/t/install-wiki.sh: use a lowercase "usage:" string
contrib/examples/git-remote.perl: use a lowercase "usage:" string
tests: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
Documentation/user-manual.txt: use a lowercase "usage:" string
templates/hooks--update.sample: use a lowercase "usage:" string
contrib/hooks/setgitperms.perl: use a lowercase "usage:" string
contrib/examples: use a lowercase "usage:" string
contrib/fast-import/import-zips.py: use spaces instead of tabs
contrib/fast-import/import-zips.py: fix broken error message
contrib/fast-import: use a lowercase "usage:" string
contrib/credential: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsexportcommit: use a lowercase "usage:" string
git-archimport: use a lowercase "usage:" string
git-merge-one-file: use a lowercase "usage:" string
git-relink: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
git-sh-setup: use a lowercase "usage:" string
Expand %G? in pretty format strings to 'N' in case of no GPG signature
and 'U' in case of a good but untrusted GPG signature in addition to
the previous 'G'ood and 'B'ad. This eases writing anyting parsing
git-log output.
Signed-off-by: Sebastian Götte <jaseg@physik-pool.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --verify-signatures is specified, abort the merge in case a good
GPG signature from an untrusted key is encountered.
Signed-off-by: Sebastian Götte <jaseg@physik-pool.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --verify-signatures is specified on the command-line of git-merge
or git-pull, check whether the commits being merged have good gpg
signatures and abort the merge in case they do not. This allows e.g.
auto-deployment from untrusted repo hosts.
Signed-off-by: Sebastian Götte <jaseg@physik-pool.tu-berlin.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A string that names an object can be suffixed with ^{type} peeler to
say "I have this object name; peel it until you get this type. If
you cannot do so, it is an error". v1.8.2^{commit} asks for a commit
that is pointed at an annotated tag v1.8.2; v1.8.2^{tree} unwraps it
further to the top-level tree object. A special suffix ^{} (i.e. no
type specified) means "I do not care what it unwraps to; just peel
annotated tag until you get something that is not a tag".
When you have a random user-supplied string, you can turn it to a
bare 40-hex object name, and cause it to error out if such an object
does not exist, with:
git rev-parse --verify "$userstring^{}"
for most objects, but this does not yield the tag object name when
$userstring refers to an annotated tag.
Introduce a new suffix, ^{object}, that only makes sure the given
name refers to an existing object. Then
git rev-parse --verify "$userstring^{object}"
becomes a way to make sure $userstring refers to an existing object.
This is necessary because the plumbing "rev-parse --verify" is only
about "make sure the argument is something we can feed to get_sha1()
and turn it into a raw 20-byte object name SHA-1" and is not about
"make sure that 20-byte object name SHA-1 refers to an object that
exists in our object store". When the given $userstring is already
a 40-hex, by definition "rev-parse --verify $userstring" can turn it
into a raw 20-byte object name. With "$userstring^{object}", we can
make sure that the 40-hex string names an object that exists in our
object store before "--verify" kicks in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the 1.7.9 feature to merge a signed tag and keep that in
the mergetag header in the resulting commit better.
* yd/doc-merge-annotated-tag:
Documentation: merging a tag is a special case
"git difftool --dir-diff" made symlinks to working tree files when
preparing a temporary directory structure, so that accidental edits
of these files in the difftool are reflected back to the working
tree, but the logic to decide when to do so was not quite right.
* jk/difftool-dir-diff-edit-fix:
difftool --dir-diff: symlink all files matching the working tree
difftool: avoid double slashes in symlink targets
git-difftool(1): fix formatting of --symlink description
This new syntax finds a funcname matching /pattern/, and then takes from there
up to (but not including) the next funcname. So you can say
git log -L:main:main.c
and it will dig up the main() function and show its line-log, provided
there are no other funcnames matching 'main'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to use the same style of -L n,m argument for 'git log -L' as
for git-blame. Refactor the argument parsing of the range arguments
from builtin/blame.c to the (new) file that will hold the 'git log -L'
logic.
To accommodate different data structures in blame and log -L, the file
contents are abstracted away; parse_range_arg takes a callback that it
uses to get the contents of a line of the (notional) file.
The new test is for a case that made me pause during debugging: the
'blame -L with invalid end' test was the only one that noticed an
outright failure to parse the end *at all*. So make a more explicit
test for that.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"insn" appears to be an in-code abbreviation and should not appear
in manual/help pages.
Signed-off-by: Matthias Krüger <matthias.krueger@famsik.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
More fixes for 1.8.2.1
merge-tree: fix typo in merge-tree.c::unresolved
git-commit doc: describe use of multiple `-m` options
git-pull doc: fix grammo ("conflicts" is plural)
The text is copied from Documentation/git-tag.txt.
Signed-off-by: Christian Helmuth <christian.helmuth@genode-labs.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the order mergetools feeds the files to the p4merge backend
to match the p4 convention.
* kb/p4merge:
merge-one-file: force content conflict for "both sides added" case
git-merge-one-file: send "ERROR:" messages to stderr
git-merge-one-file: style cleanup
merge-one-file: remove stale comment
mergetools/p4merge: create a base if none available
mergetools/p4merge: swap LOCAL and REMOTE
In particular, it can get called with four arguments if you happen to
be referring to a repo using the ssh:// scheme with a non-default port
number.
Signed-off-by: Dan Bornstein <danfuzz@milk.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit ba3c69a9 (commit: teach --gpg-sign option, 2011-10-05) added the
-S option but documented it in the command usage without indicating that
the value is optional and forgot to mention it in the manpage. Later
commit 098bbdc3 (Add -S, --gpg-sign option to manpage of "git commit",
2012-10-21) documented the option in the porcelain manpage.
Use wording from the porcelain manpage to document the option in the
plumbing manpage. Also update the commit-tree usage summary to indicate
that the -S value is optional to be consistent with the manpage and with
the implementation.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no Porcelain way to say "I no longer am interested in
this submodule", once you express your interest in a submodule with
"submodule init". "submodule deinit" is the way to do so.
* jl/submodule-deinit:
submodule: add 'deinit' command
* maint-1.8.1:
bundle: Add colons to list headings in "verify"
bundle: Fix "verify" output if history is complete
Documentation: filter-branch env-filter example
git-filter-branch.txt: clarify ident variables usage
git-compat-util.h: Provide missing netdb.h definitions
describe: Document --match pattern format
Documentation/githooks: Explain pre-rebase parameters
update-index: list supported idx versions and their features
diff-options: unconfuse description of --color
read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr()
index-format.txt: mention of v4 is missing in some places
Add an example use of "--env-filter" in "filter-branch"
documentation.
* tk/doc-filter-branch:
Documentation: filter-branch env-filter example
git-filter-branch.txt: clarify ident variables usage
The "--match=<pattern>" argument "git describe" takes uses glob
pattern but it wasn't obvious from the documentation.
* gp/describe-match-uses-glob-pattern:
describe: Document --match pattern format
The v4 index format was not documented.
* nd/doc-index-format:
update-index: list supported idx versions and their features
read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr()
index-format.txt: mention of v4 is missing in some places
The "--color=<when>" argument to the commands in the diff family
was described poorly.
* jc/color-diff-doc:
diff-options: unconfuse description of --color
When asking Git to merge a tag (such as a signed tag or annotated tag),
it will always create a merge commit even if fast-forward was possible.
It's like having --no-ff present on the command line.
It's a difference from the default behavior described in git-merge.txt.
It should be documented as an exception of "FAST-FORWARD MERGE" section
and "--ff" option description.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before talking about notations such as optional [--option] enclosed
in brackets, state that the documents are in AsciiDoc and processed
into other formats.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hooks the credential system to send-email.
* mn/send-email-works-with-credential:
git-send-email: use git credential to obtain password
Git.pm: add interface for git credential command
Git.pm: allow pipes to be closed prior to calling command_close_bidi_pipe
Git.pm: refactor command_close_bidi_pipe to use _cmd_close
Git.pm: fix example in command_close_bidi_pipe documentation
Git.pm: allow command_close_bidi_pipe to be called as method
Call "gpg" using the right API when validating the signature on
tags.
* mg/gpg-interface-using-status:
pretty: make %GK output the signing key for signed commits
pretty: parse the gpg status lines rather than the output
gpg_interface: allow to request status return
log-tree: rely upon the check in the gpg_interface
gpg-interface: check good signature in a reliable way
'git commit -m "$str"' when $str was already terminated with a LF
now avoids adding an extra LF to the message.
* bc/commit-complete-lines-given-via-m-option:
Documentation/git-commit.txt: rework the --cleanup section
git-commit: only append a newline to -m mesg if necessary
t7502: demonstrate breakage with a commit message with trailing newlines
t/t7502: compare entire commit message with what was expected
"git count-objects -v" did not count leftover temporary packfiles
and other kinds of garbage.
* nd/count-garbage:
count-objects: report how much disk space taken by garbage files
count-objects: report garbage files in pack directory too
sha1_file: reorder code in prepare_packed_git_one()
git-count-objects.txt: describe each line in -v output
Allows requests to fetch objects at any tip of refs (including
hidden ones). It seems that there may be use cases even outside
Gerrit (e.g. $gmane/215701).
* jc/fetch-raw-sha1:
fetch: fetch objects by their exact SHA-1 object names
upload-pack: optionally allow fetching from the tips of hidden refs
fetch: use struct ref to represent refs to be fetched
parse_fetch_refspec(): clarify the codeflow a bit
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
When the interactive access to git-shell is not enabled, we issue a
message meant to help the system admininstrator to enable it. Add
an explicit way to help the end users who connect to the service by
issuing custom messages to refuse such an access.
* jn/shell-disable-interactive:
shell: new no-interactive-login command to print a custom message
shell doc: emphasize purpose and security model
Clarify in the documentation "what" gets pushed to "where" when the
command line to "git push" does not say these explicitly.
* jc/maint-push-refspec-default-doc:
Documentation/git-push: clarify the description of defaults
The syntax of the pattern given to the "--match=<pattern>" argument
to "git describe" was not documented to be a glob.
* gp/describe-match-uses-glob-pattern:
describe: Document --match pattern format
* da/downcase-u-in-usage:
contrib/mw-to-git/t/install-wiki.sh: use a lowercase "usage:" string
contrib/examples/git-remote.perl: use a lowercase "usage:" string
tests: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
Documentation/user-manual.txt: use a lowercase "usage:" string
templates/hooks--update.sample: use a lowercase "usage:" string
contrib/hooks/setgitperms.perl: use a lowercase "usage:" string
contrib/examples: use a lowercase "usage:" string
contrib/fast-import/import-zips.py: use spaces instead of tabs
contrib/fast-import/import-zips.py: fix broken error message
contrib/fast-import: use a lowercase "usage:" string
contrib/credential: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsexportcommit: use a lowercase "usage:" string
git-archimport: use a lowercase "usage:" string
git-merge-one-file: use a lowercase "usage:" string
git-relink: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
git-sh-setup: use a lowercase "usage:" string
Update the index format documentation to mention the v4 format.
* nd/doc-index-format:
update-index: list supported idx versions and their features
read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr()
index-format.txt: mention of v4 is missing in some places
* maint:
rev-parse: clarify documentation of $name@{upstream} syntax
sha1_name: pass object name length to diagnose_invalid_sha1_path()
Makefile: keep LIB_H entries together and sorted
"git rev-parse" interprets string in string@{upstream} as a name of
a branch not a ref. For example, refs/heads/master@{upstream} looks
for an upstream branch that is merged by git-pull to ref
refs/heads/refs/heads/master not to refs/heads/master.
However the documentation could mislead a user to believe that the
string is interpreted as ref.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce advice.statusUoption to suggest considering use of -u to
strike different trade-off when it took more than 2 seconds to
enumerate untracked/ignored files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some repostories users experience that "git status" command takes
long time. The command spends some time searching the file system
for untracked files.
Explain the trade-off struck by the default choice of `normal` to
help users make an appropriate choice better, before talking about
the configuration variable.
Inspired by Torsten Bögershausen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users like to edit files in their diff tool when using "git
difftool --dir-diff --symlink" to compare against the working tree but
difftool currently only created symlinks when a file contains unstaged
changes.
Change this behaviour so that symlinks are created whenever the
right-hand side of the comparison has the same SHA1 as the file in the
working tree.
Note that textconv filters are handled in the same way as by git-diff
and if a clean filter is not the inverse of its smudge filter we already
get a null SHA1 from "diff --raw" and will symlink the file without
going through the new hash-object based check.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, with no base, Git gave P4Merge $LOCAL as a dummy base:
p4merge "$LOCAL" "$LOCAL" "$REMOTE" "$MERGED"
Commit 0a0ec7bd changed this to:
p4merge "empty file" "$LOCAL" "$REMOTE" "$MERGED"
to avoid the problem of being unable to save in some circumstances with
similar inputs.
Unfortunately this approach produces much worse results on differing
inputs. P4Merge really regards the blank file as the base, and once you
have just a couple of differences between the two branches you end up
with one a massive full-file conflict. The 3-way diff is not readable,
and you have to invoke "difftool MERGE_HEAD HEAD" manually to get a
useful view.
The original approach appears to have invoked special 2-way merge
behaviour in P4Merge that occurs only if the base filename is "" or
equal to the left input. You get a good visual comparison, and it does
not auto-resolve differences. (Normally if one branch matched the base,
it would autoresolve to the other branch).
But there appears to be no way of getting this 2-way behaviour and being
able to reliably save. Having base==left appears to be triggering other
assumptions. There are tricks the user can use to force the save icon
on, but it's not intuitive.
So we now follow a suggestion given in the original patch's discussion:
generate a virtual base, consisting of the lines common to the two
branches. This is the same as the technique used in resolve and octopus
merges, so we relocate that code to a shared function.
Note that if there are no differences at the same location, this
technique can lead to automatic resolution without conflict, combining
everything from the 2 files. As with the other merges using this
technique, we assume the user will inspect the result before saving.
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Reviewed-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If I disable git-shell's interactive mode by removing the
~/git-shell-commands directory, attempts to ssh in to the service
produce a message intended for the administrator:
$ ssh git@myserver
fatal: Interactive git shell is not enabled.
hint: ~/git-shell-commands should exist and have read and execute access.
$
That is helpful for the new admin who is wondering "What? Why isn't
the git-shell I just set up working?", but once the site setup is
complete, it would be better to give the user a friendly hint that she
is on the right track, like GitHub does.
Hi <username>! You've successfully authenticated, but
GitHub does not provide shell access.
An appropriate greeting might even include more complex dynamic
information, like gitolite's list of repositories the user has access
to. Add support for a ~/git-shell-commands/no-interactive-login
command that generates an arbitrary greeting. When the user tries to
log in:
* If the file ~/git-shell-commands/no-interactive-login exists,
run no-interactive-login to let the server say what it likes,
then hang up.
* Otherwise, if ~/git-shell-commands/ is present, start an
interactive read-eval-print loop.
* Otherwise, print the usual configuration hint and hang up.
Reported-by: Ethan Reesor <firelizzard@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original git-shell(1) manpage emphasized that the shell supports
only git transport commands. As the shell gained features, that
emphasis and focus in the manual has been lost. Bring it back by
splitting the manpage into a few short sections and fleshing out each:
- SYNOPSIS, describing how the shell gets used in practice
- DESCRIPTION, which gives an overview of the purpose and guarantees
provided by this restricted shell
- COMMANDS, listing supported commands and restrictions on the
arguments they accept
- INTERACTIVE USE, describing the interactive mode
Also add a "see also" section with related reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git add subdir/" is run without "-u" or "-A" option, e.g.
$ edit subdir/x
$ create subdir/y
$ rm subdir/z
$ git add subdir/
the command does not notice removal of paths (e.g. subdir/z) from
the working tree. This sometimes confuses new people, as arguably
"git add" is told to record the current state of "subdir/" as a
whole, not the current state of the paths that exist in the working
tree that matches that pathspec (the latter by definition excludes
the state of "subdir/z" because it does not exist in the working
tree).
Plan to eventually make "git add" pretend as if "-A" is given when
there is a pathspec on the command line. When resolving a conflict
to remove a path, the current code tells you to "git rm $path", but
with such a change, you will be able to say "git add $path" (of
course you can do "git add -A $path" today). That means that we can
simplify the advice messages given by "git status". That all will
be in Git 2.0 or later, if we are going to do so.
For that transition to work, people need to learn either to say "git
add --no-all subdir/" when they want to ignore the removed paths
like "subdir/z", or to say "git add -A subdir/" when they want to
take the state of the directory as a whole.
"git add" without any argument will continue to be a no-op.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split the backward-compatibility notes into two sections, the ones
that affect this release, and the other to describe changes meant
for Git 2.0. The latter gives a context to understand why the
changes for this release is necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We describe what gets pushed by default when the command line does
not give any <refspec> under the bullet point of <refspec>.
It is a bit unfriendly to expect users to read on <refspec> when
they are not giving any in the first place. "What gets pushed" is
determined by taking many factors (<refspec> argument being only one
of them) into account, and is a property of the entire command, not
an individual argument. Also we do not describe "Where the push
goes" when the command line does not say.
Give the description on "what gets pushed to where" upfront before
explaining individual arguments and options.
Also update the description of <refspec> to say what it is, what it
is used for, before explaining what shape it takes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation of '-A' and '-u' is very confusing for someone who
doesn't already know what they do. Describe them with fewer words and
clearer parallelism to each other and to the behavior of plain 'add'.
Also mention the default <pathspec> for '-A' as well as '-u', because
it applies to both.
Signed-off-by: Greg Price <price@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option "--follow-tags" tells "git push" to push annotated
tags that are missing from the other side and that can be reached by
the history that is otherwise pushed out.
For example, if you are using the "simple", "current", or "upstream"
push, you would ordinarily push the history leading to the commit at
your current HEAD and nothing else. With this option, you would
also push all annotated tags that can be reached from that commit to
the other side.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git submodule init" the user is able to tell git he cares about one
or more submodules and wants to have it populated on the next call to "git
submodule update". But currently there is no easy way he could tell git he
does not care about a submodule anymore and wants to get rid of his local
work tree (except he knows a lot about submodule internals and removes the
"submodule.$name.url" setting from .git/config together with the work tree
himself).
Help those users by providing a 'deinit' command. This removes the
whole submodule.<name> section from .git/config (either for the given
submodule(s) or for all those which have been initialized if '.' is used)
together with their work tree. Fail if the current work tree contains
modifications (unless forced), but don't complain when either the work
tree is already removed or no settings are found in .git/config.
Add tests and link the man pages of "git submodule deinit" and "git rm"
to assist the user in deciding whether removing or unregistering the
submodule is the right thing to do for him. Also add the deinit subcommand
to the completion list.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* wk/user-manual:
user-manual: Flesh out uncommitted changes and submodule updates
user-manual: Use request-pull to generate "please pull" text
user-manual: Reorganize the reroll sections, adding 'git rebase -i'
An earlier workaround designed to help people who list logical
directories that will not match what getcwd(3) returns in the
GIT_CEILING_DIRECTORIES had an adverse effect when it is slow to
stat and readlink a directory component of an element listed on it.
* mh/maint-ceil-absolute:
Provide a mechanism to turn off symlink resolution in ceiling paths
If smtp_user is provided but smtp_pass is not, instead of
prompting for password, make git-send-email use git
credential command instead.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 9db31bdf (submodule: Add --force option for git submodule
update, 2011-04-01) we added the option to the implementation's usage
synopsis but forgot to add it to the synopsis in the command
documentation. Add the option to the synopsis in the same location it
is reported in usage and re-wrap the options to avoid long lines.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
filter-branch --env-filter example that shows how to change the email
address in all commits before publishing a project.
Signed-off-by: Tadeusz Andrzej Kadłubowski <yess@hell.org.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a rare edge case of git-filter-branch: a filter that unsets
identity variables from the environment. Link to git-commit-tree
clarifies how Git would fall back in this situation.
Signed-off-by: Tadeusz Andrzej Kadłubowski <yess@hell.org.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I tried to always use backticks for:
* Paths and filenames (e.g. `.git/config`)
* Compound refs (e.g. `origin/HEAD`)
* Git commands (e.g. `git log`)
* Command arguments (e.g. `--pretty`)
* URLs (e.g. `git://`), as a subset of command arguments
* Special characters (e.g. `+` in diffs).
* Config options (e.g. `branch.<name>.remote`)
Branch and tag names are sometimes set off with double quotes,
sometimes set off with backticks, and sometimes left bare. I tried to
judge when the intention was introducing new terms or conventions
(double quotes), to reference a recently used command argument
(backticks), or to reference the abstract branch/commit (left bare).
Obviously these are not particularly crisp definitions, so my
decisions are fairly arbitrary ;). When a reference had already been
introduced, I changed further double-quoted instances to backticked
instances.
When new backticks increased the length of a line beyond others in
that block, I re-wrapped blocks to 72 columns.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further updates to the user manual.
* wk/user-manual:
user-manual: Flesh out uncommitted changes and submodule updates
user-manual: Use request-pull to generate "please pull" text
user-manual: Reorganize the reroll sections, adding 'git rebase -i'
"Advice" is a mass noun, not a count noun; it's not ordinarily
pluralized.
Signed-off-by: Greg Price <price@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not clear in git-describe(1) what kind of "pattern" should be
passed to --match. Fix that.
Signed-off-by: Greg Price <price@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A couple of references still survive to .git/refs as a tree
of all refs. Fix one in docs, one in a -h message, one in
a -h message quoted in docs.
Signed-off-by: Greg Price <price@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the usage string in the example script consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Descriptions borrowed from templates/hooks--pre-rebase.sample.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It said "by default it is off" while it also said "the default is
always", which confused everybody who read it only once. It wanted
to say (1) if you do not say --color, it is not enabled, and (2) if
you say --color but do not say when to enable it, it will always be
enabled".
Rephrase to clarify by using "default" only once.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 1b77d83cab 'setup_git_directory_gently_1(): resolve symlinks
in ceiling paths' changed the setup code to resolve symlinks in the
entries in GIT_CEILING_DIRECTORIES. Because those entries are
compared textually to the symlink-resolved current directory, an
entry in GIT_CEILING_DIRECTORIES that contained a symlink would have
no effect. It was known that this could cause performance problems
if the symlink resolution *itself* touched slow filesystems, but it
was thought that such use cases would be unlikely. The intention of
the earlier change was to deal with a case when the user has this:
GIT_CEILING_DIRECTORIES=/home/gitster
but in reality, /home/gitster is a symbolic link to somewhere else,
e.g. /net/machine/home4/gitster. A textual comparison between the
specified value /home/gitster and the location getcwd(3) returns
would not help us, but readlink("/home/gitster") would still be
fast.
After this change was released, Anders Kaseorg <andersk@mit.edu>
reported:
> [...] my computer has been acting so slow when I’m not connected to
> the network. I put various network filesystem paths in
> $GIT_CEILING_DIRECTORIES, such as
> /afs/athena.mit.edu/user/a/n/andersk (to avoid hitting its parents
> /afs/athena.mit.edu, /afs/athena.mit.edu/user/a, and
> /afs/athena.mit.edu/user/a/n which all live in different AFS
> volumes). Now when I’m not connected to the network, every
> invocation of Git, including the __git_ps1 in my shell prompt, waits
> for AFS to timeout.
To allow users to work around this problem, give them a mechanism to
turn off symlink resolution in GIT_CEILING_DIRECTORIES entries. All
the entries that follow an empty entry will not be checked for symbolic
links and used literally in comparison. E.g. with these:
GIT_CEILING_DIRECTORIES=:/foo/bar:/xyzzy or
GIT_CEILING_DIRECTORIES=/foo/bar::/xyzzy
we will not readlink("/xyzzy") because it comes after an empty entry.
With the former (but not with the latter), "/foo/bar" comes after an
empty entry, and we will not readlink it, either.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you try and update a submodule with a dirty working directory, you
get an error message like:
$ git submodule update
error: Your local changes to the following files would be overwritten by checkout:
...
Please, commit your changes or stash them before you can switch branches.
Aborting
...
Mention this in the submodule notes. The previous phrase was short
enough that I originally thought it might have been referring to the
reflog note (obviously, uncommitted changes will not show up in the
reflog either ;).
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Less work and more error checking (e.g. does a merge base exist?).
Add an explicit push before request-pull to satisfy request-pull,
which checks to make sure the references are publically available.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think this interface is often more convenient than extended cherry
picking or using 'git format-patch'. In fact, I removed the
cherry-pick section entirely. The entry-level suggestions for
rerolling are now:
1. git commit --amend
2. git format-patch origin
git reset --hard origin
...edit and reorder patches...
git am *.patch
3. git rebase -i origin
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We stopped mentioning `tracking` is a deprecated but supported
synonym for `upstream` in pull.default even though we have no
intention of removing the support for it.
* jc/mention-tracking-for-pull-default:
doc: mention tracking for pull.default
Also migration path for the default behaviour of "git add -u/-A" run
in a subdirectory is worth mentioning.
Both pointed out by Matthieu Moy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
user-manual: use -o latest.tar.gz to create a gzipped tarball
user-manual: use 'git config --global user.*' for setup
user-manual: mention 'git remote add' for remote branch config
user-manual: give 'git push -f' as an alternative to +master
user-manual: use 'remote add' to setup push URLs
This functionality was introduced by 0e804e09 (archive: provide
builtin .tar.gz filter, 2011-07-21) for v1.7.7.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A simple command line call is easier than spawning an editor,
especially for folks new to ideas like the "command line" and "text
editors". This is also the approach suggested by 'git commit' if you
try and commit without having configured user.name or user.email.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I hardly ever setup remote.<name>.url using 'git config'. While it
may be instructive to do so, we should also point out 'git remote
add'.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mirrors existing language in the description of 'git fetch'.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to use here documents to setup this configuration.
It is easier, less confusing, and more robust to use `git remote add`
directly.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow the server side to redact the refs/ namespace it shows to the
client.
Will merge to 'master'.
* jc/hidden-refs:
upload/receive-pack: allow hiding ref hierarchies
upload-pack: simplify request validation
upload-pack: share more code
Add diff.algorithm configuration so that the user does not type
"diff --histogram".
* mp/diff-algo-config:
diff: Introduce --diff-algorithm command line option
config: Introduce diff.algorithm variable
git-completion.bash: Autocomplete --minimal and --histogram for git-diff
The old Git version where it appeared is now useful only to historians,
not to normal users. Also, the text was mentioning only the per-repo
config file, but this is a good place to teach that customization can
also be made per-user.
While at it, remove a now-defunct e-mail from an example.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also issue warnings on loose garbages instead of errors as a result of
using report_garbage() function in count_objects()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prepare_packed_git_one() is modified to allow count-objects to hook a
report function to so we don't need to duplicate the pack searching
logic in count-objects.c. When report_pack_garbage is NULL, the
overhead is insignificant.
The garbage is reported with warning() instead of error() in packed
garbage case because it's not an error to have garbage. Loose garbage
is still reported as errors and will be converted to warnings later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge at 5bf72ed2 missed another instance of <filepattern> that
we were converting to <pathspec>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
acd2a45 (Refuse updating the current branch in a non-bare repository
via push, 2009-02-11) changed the default to refuse such a push, but
it forgot to update the docs.
7d182f5 (Documentation: receive.denyCurrentBranch defaults to
'refuse', 2010-03-17) updated Documentation/config.txt, but forgot to
update the user manual.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to employ signed keys in an automated way it is absolutely
necessary to check which keys the signatures come from.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pathspec is the most widely used term, and is the one defined in
gitglossary.txt. <filepattern> was used only in the synopsys for git-add
and git-commit, and in git-add.txt. Get rid of it.
This patch is obtained with by running:
perl -pi -e 's/filepattern/pathspec/' `git grep -l filepattern`
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"reset" can be easily misunderstood as resetting a bisect session to its
start without finishing it. Clarify that it actually quits the bisect
session.
Reported-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should have happened back in 2007, when `git gc` learned about
auto (e9831e8, git-gc --auto: add documentation, 2007-09-17).
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use an em-dash, not a hyphen, to join these clauses.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP is an acronym which has not (yet) made the transition to word
status (unlike "laser", probably because lasers are inherently cooler
than HTTP ;).
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The clause "so `git log ...` will return no commits..." is
independent, not a description of "both", so a semicolon is more
appropriate.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current description requires a bit of guessing (what clause
corresponds to what printed line?) and lacks information, such as
the unit of size and size-pack.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Build on top of the clean-up done by jk/mergetool and automatically
generate the list of mergetool and difftool backends the build
supports to be included in the documentation.
* da/mergetool-docs:
doc: generate a list of valid merge tools
mergetool--lib: list user configured tools in '--tool-help'
mergetool--lib: add functions for finding available tools
mergetool--lib: improve the help text in guess_merge_tool()
mergetool--lib: simplify command expressions
"git help remote-helpers" did not work; 'remote-helpers' is not
a subcommand name but a concept, so its documentation should have
been in gitremote-helpers, not git-remote-helpers.
* jk/remote-helpers-doc:
Rename {git- => git}remote-helpers.txt
Fix various error messages and conditions in "git branch", e.g. we
advertised "branch -d/-D" to remove one or more branches but actually
implemented removal of zero or more branches---request to remove no
branches was not rejected.
* nd/branch-error-cases:
branch: let branch filters imply --list
docs: clarify git-branch --list behavior
branch: mark more strings for translation
branch: give a more helpful message on redundant arguments
branch: reject -D/-d without branch name
With uploadpack.allowtipsha1inwant configuration option set, future
versions of "git fetch" that allow an exact object name (likely to
have been obtained out of band) on the LHS of the fetch refspec can
make a request with a "want" line that names an object that may not
have been advertised due to transfer.hiderefs configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A repository may have refs that are only used for its internal
bookkeeping purposes that should not be exposed to the others that
come over the network.
Teach upload-pack to omit some refs from its initial advertisement
by paying attention to the uploadpack.hiderefs multi-valued
configuration variable. Do the same to receive-pack via the
receive.hiderefs variable. As a convenient short-hand, allow using
transfer.hiderefs to set the value to both of these variables.
Any ref that is under the hierarchies listed on the value of these
variable is excluded from responses to requests made by "ls-remote",
"fetch", etc. (for upload-pack) and "push" (for receive-pack).
Because these hidden refs do not count as OUR_REF, an attempt to
fetch objects at the tip of them will be rejected, and because these
refs do not get advertised, "git push :" will not see local branches
that have the same name as them as "matching" ones to be sent.
An attempt to update/delete these hidden refs with an explicit
refspec, e.g. "git push origin :refs/hidden/22", is rejected. This
is not a new restriction. To the pusher, it would appear that there
is no such ref, so its push request will conclude with "Now that I
sent you all the data, it is time for you to update the refs. I saw
that the ref did not exist when I started pushing, and I want the
result to point at this commit". The receiving end will apply the
compare-and-swap rule to this request and rejects the push with
"Well, your update request conflicts with somebody else; I see there
is such a ref.", which is the right thing to do. Otherwise a push to
a hidden ref will always be "the last one wins", which is not a good
default.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update documentation to change "GIT" which was a poor-man's small
caps to "Git". The latter was the intended spelling.
Also change "git" spelled in all-lowercase to "Git" when it refers
to the system as the whole or the concept it embodies, as opposed to
the command the end users would type.
* ta/doc-no-small-caps:
Documentation: StGit is the right spelling, not StGIT
Documentation: describe the "repository" in repository-layout
Documentation: add a description for 'gitfile' to glossary
Documentation: do not use undefined terms git-dir and git-file
Documentation: the name of the system is 'Git', not 'git'
Documentation: avoid poor-man's small caps GIT
Forbid "git add -u" and "git add -A" without pathspec run from a
subdirectory, to train people to type "." (or ":/") to make the
choice of default does not matter.
* mm/add-u-A-sans-pathspec:
add: warn when -u or -A is used without pathspec
Improve error and advice messages given locally when "git push"
refuses when it cannot compute fast-forwardness by separating these
cases from the normal "not a fast-forward; merge first and push
again" case.
* jc/push-reject-reasons:
push: finishing touches to explain REJECT_ALREADY_EXISTS better
push: introduce REJECT_FETCH_FIRST and REJECT_NEEDS_FORCE
push: further simplify the logic to assign rejection reason
push: further clean up fields of "struct ref"
Allow a configuration variable core.commentchar to customize the
character used to comment out the hint lines in the edited text from
the default '#'.
* jc/custom-comment-char:
Allow custom "comment char"
Use the show_tool_names() function to build lists of all
the built-in tools supported by difftool and mergetool.
This frees us from needing to update the documentation
whenever a new tool is added.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking up a topic via "git help <topic>", git-help prepends "git-"
to topics that are the names of commands (either builtin or found on the
path) and "git" (no hyphen) to any other topic name.
"git-remote-helpers" is not the name of a command, so "git help
remote-helpers" looks for "gitremote-helpers" and does not find it.
Fix this by renaming "git-remote-helpers.txt" to
"gitremote-helpers.txt".
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They refer themselves as such at https://gna.org/projects/stgit/
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the introductory part and concisely explain how gitfile is
handled, what it is used for and for what effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will add gitfile to the glossary in a separate commit.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the earlier days, we used to spell the name of the system as GIT,
to simulate as if it were typeset with capital G and IT in small
caps. Later we stopped doing so at around 1.6.5 days.
Let's stop doing so throughout the documentation. The name to refer
to the whole system (and the concept it embodies) is "Git"; the
command end-users type is "git". And document this in the coding
guideline.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Warn people that other tools are more recommendable over
cvsimport+cvsps2 combo when doing a one-shot import, and cvsimport
will not work with cvsps3.
* jk/cvsimport-does-not-work-with-cvsps3:
git-cvsimport.txt: cvsps-2 is deprecated
"git fetch --depth" was broken in at least three ways. The
resulting history was deeper than specified by one commit, it was
unclear how to wipe the shallowness of the repository with the
command, and documentation was misleading.
* nd/fetch-depth-is-broken:
fetch: elaborate --depth action
upload-pack: fix off-by-one depth calculation in shallow clone
fetch: add --unshallow for turning shallow repo into complete one
We keep a list of the various files that end up as man1,
man5, etc. Let's break these single-line lists into sorted
multi-line lists, which makes diffs that touch them much
easier to read.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When looking at a configuration file edited long time ago, a user
may find 'pull.default = tracking' and wonder what it means, but
earlier we stopped mentioning this value, even though the code still
support it and more importantly, we have no intention to force old
timers to update their configuration files.
Instead of not mentioning it, add it to the description in a way
that makes it clear that users have no reason to add new uses of it
preferring over 'upstream', by not listing it as a separate item on
the same footing as other values but as a deprecated synonym of the
'upstream' in its description.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, a branch filter like `--contains`, `--merged`, or
`--no-merged` is ignored when we are not in listing mode.
For example:
git branch --contains=foo bar
will create the branch "bar" from the current HEAD, ignoring
the `--contains` argument entirely. This is not very
helpful. There are two reasonable behaviors for git here:
1. Flag an error; the arguments do not make sense.
2. Implicitly go into `--list` mode
This patch chooses the latter, as it is more convenient, and
there should not be any ambiguity with attempting to create
a branch; using `--contains` and not wanting to list is
nonsensical.
That leaves the case where an explicit modification option
like `-d` is given. We already catch the case where
`--list` is given alongside `-d` and flag an error. With
this patch, we will also catch the use of `--contains` and
other filter options alongside `-d`.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was not clear from the "description" section of git-branch(1)
that using a <pattern> meant that you _had_ to use the --list
option. Let's clarify that, and while we're at it, reword some
clunky and ambiguous sentences.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are kept short by simply deferring to PEP-8. Most of the Python
code in Git is already very close to this style (some things in contrib/
are not).
Rationale for version suggestions:
- Amongst the noise in [1], there isn't any disagreement about using
2.6 as a base (see also [2]), although Brandon Casey recently added
support for 2.4 and 2.5 to git-p4 [3].
- Restricting ourselves to 2.6+ makes aiming for Python 3 compatibility
significantly easier [4].
- Advocating Python 3 support in all scripts is currently unrealistic
because:
- 'p4 -G' provides output in a format that is very hard to use with
Python 3 (and its documentation claims Python 3 is unsupported).
- Mercurial does not support Python 3.
- Bazaar does not support Python 3.
- But we should try to make new scripts compatible with Python 3
because all new Python development is happening on version 3 and the
Python community will eventually stop supporting Python 2 [5].
- Python 3.1 is required to support the 'surrogateescape' error handler
for encoding/decodng filenames to/from Unicode strings and Python 3.0
is not longer supported.
[1] http://thread.gmane.org/gmane.comp.version-control.git/210329
[2] http://article.gmane.org/gmane.comp.version-control.git/210429
[3] http://thread.gmane.org/gmane.comp.version-control.git/214579
[4] http://docs.python.org/3.3/howto/pyporting.html#try-to-support-python-2-6-and-newer-only
[5] http://www.python.org/dev/peps/pep-0404/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some reimplementations of Git does not write all the stat info back
to the index due to their implementation limitations (e.g. jgit
running on Java). A configuration option can tell Git to ignore
changes to most of the stat fields and only pay attention to mtime
and size, which these implementations can reliably update. This
avoids excessive revalidation of contents.
* rr/minimal-stat:
Enable minimal stat checking
An element on GIT_CEILING_DIRECTORIES list that does not name the
real path to a directory (i.e. a symbolic link) could have caused
the GIT_DIR discovery logic to escape the ceiling.
* mh/ceiling:
string_list_longest_prefix(): remove function
setup_git_directory_gently_1(): resolve symlinks in ceiling paths
longest_ancestor_length(): require prefix list entries to be normalized
longest_ancestor_length(): take a string_list argument for prefixes
longest_ancestor_length(): use string_list_split()
Introduce new function real_path_if_valid()
real_path_internal(): add comment explaining use of cwd
Introduce new static function real_path_internal()
Most Git commands that can be used with or without pathspec operate
tree-wide by default, the pathspec being used to restrict their
scope. A few exceptions are: 'git grep', 'git clean', 'git add -u'
and 'git add -A'. When run in a subdirectory without pathspec, they
operate only on paths in the current directory.
The inconsistency of 'git add -u' and 'git add -A' is particularly
problematic since other 'git add' subcommands (namely 'git add -p'
and 'git add -e') are tree-wide by default. It also means that "git
add -u && git commit" will record a state that is different from
what is recorded with "git commit -a".
Flipping the default now is unacceptable, so let's start training
users to type 'git add -u|-A :/' or 'git add -u|-A .' explicitly, to
prepare for the next steps:
* forbid 'git add -u|-A' without pathspec (like 'git add' without
option)
* much later, maybe, re-allow 'git add -u|-A' without pathspec, that
will add all tracked and modified files, or all files, tree-wide.
A nice side effect of this patch is that it makes the :/ magic
pathspec easier to discover for users.
When the command is called from the root of the tree, there is no
ambiguity and no need to change the behavior, hence no need to warn.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe tools for automation that were invented since this
document was originally written.
* jc/doc-maintainer:
howto/maintain: document "### match next" convention in jch/pu branch
howto/maintain: mark titles for asciidoc
Documentation: update "howto maintain git"
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-cvsimport relies on version 2 of cvsps and does not work with the
new version 3. Since cvsps 3.x does not currently work as well as
version 2 for incremental import, document this fact.
Specifically, there is no way to make new git-cvsimport that supports
cvsps 3.x and have a seamless transition for existing users since cvsps
3.x needs a time from which to continue importing and git-cvsimport does
not save the time of the last import or import into a specific namespace
so there is no safe way to calculate the time of the last import.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an extra hook so that "git push" that is run without making
sure what is being pushed is sane can be checked and rejected (as
opposed to the user deciding not pushing).
* as/pre-push-hook:
Add sample pre-push hook script
push: Add support for pre-push hooks
hooks: Add function to check if a hook exists
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
Various git-cvsserver updates.
* mo/cvs-server-updates:
t9402: Use TABs for indentation
t9402: Rename check.cvsCount and check.list
t9402: Simplify git ls-tree
t9402: Add missing &&; Code style
t9402: No space after IO-redirection
t9402: Dont use test_must_fail cvs
t9402: improve check_end_tree() and check_end_full_tree()
t9402: sed -i is not portable
cvsserver Documentation: new cvs ... -r support
cvsserver: add t9402 to test branch and tag refs
cvsserver: support -r and sticky tags for most operations
cvsserver: Add version awareness to argsfromdir
cvsserver: generalize getmeta() to recognize commit refs
cvsserver: implement req_Sticky and related utilities
cvsserver: add misc commit lookup, file meta data, and file listing functions
cvsserver: define a tag name character escape mechanism
cvsserver: cleanup extra slashes in filename arguments
cvsserver: factor out git-log parsing logic
Various 'reset' optimizations and clean-ups, followed by a change
to allow "git reset" to work even on an unborn branch.
* mz/reset-misc:
reset: update documentation to require only tree-ish with paths
reset [--mixed]: use diff-based reset whether or not pathspec was given
reset: allow reset on unborn branch
reset $sha1 $pathspec: require $sha1 only to be treeish
reset.c: inline update_index_refresh()
reset.c: finish entire cmd_reset() whether or not pathspec is given
reset [--mixed]: only write index file once
reset.c: move lock, write and commit out of update_index_refresh()
reset.c: move update_index_refresh() call out of read_from_tree()
reset.c: replace switch by if-else
reset: avoid redundant error message
reset --keep: only write index file once
reset.c: share call to die_if_unmerged_cache()
reset.c: extract function for updating {ORIG_,}HEAD
reset.c: remove unnecessary variable 'i'
reset.c: extract function for parsing arguments
reset: don't allow "git reset -- $pathspec" in bare repo
reset.c: pass pathspec around instead of (prefix, argv) pair
reset $pathspec: exit with code 0 if successful
reset $pathspec: no need to discard index
Specifically the fields uid, gid, ctime, ino and dev are set to zero
by JGit. Other implementations, eg. Git in cygwin are allegedly also
somewhat incompatible with Git For Windows and on *nix platforms
the resolution of the timestamps may differ.
Any stat checking by git will then need to check content, which may
be very slow, particularly on Windows. Since mtime and size
is typically enough we should allow the user to tell git to avoid
checking these fields if they are set to zero in the index.
This change introduces a core.checkstat config option where the
the user can select to check all fields (default), or just size
and the whole second part of mtime (minimal).
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 7dff9b3 (Support 'raw' date format) added a raw date format.
Update the git-for-each-ref documentation to include this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration variable to set default clean-up mode other
than "strip".
* rt/commit-cleanup-config:
commit: make default of "cleanup" option configurable
Teach commands in the "log" family to optionally pay attention to
the mailmap.
* ap/log-mailmap:
log --use-mailmap: optimize for cases without --author/--committer search
log: add log.mailmap configuration option
log: grep author/committer using mailmap
test: add test for --use-mailmap option
log: add --use-mailmap option
pretty: use mailmap to display username and email
mailmap: add mailmap structure to rev_info and pp
mailmap: simplify map_user() interface
mailmap: remove email copy and length limitation
Use split_ident_line to parse author and committer
string-list: allow case-insensitive string list
* git://bogomips.org/git-svn:
git-svn: teach find-rev to find near matches
git svn: do not overescape URLs (fallback case)
Git::SVN::Editor::T: pass $deletions to ->A and ->D
In the precedence order, the environment variable $EMAIL comes
between the built-in default (i.e. taking value by asking the
system's gethostname() etc.) and the user.email configuration
variable; the documentation implied that it is stronger than the
configuration like $GIT_COMMITTER_EMAIL is, which is wrong.
* pe/doc-email-env-is-trumped-by-config:
git-commit-tree(1): correct description of defaults
Add support for a pre-push hook which can be used to determine if the
set of refs to be pushed is suitable for the target repository. The
hook is run with two arguments specifying the name and location of the
destination repository.
Information about what is to be pushed is provided by sending lines of
the following form to the hook's standard input:
<local ref> SP <local sha1> SP <remote ref> SP <remote sha1> LF
If the hook exits with a non-zero status, the push will be aborted.
This will allow the script to determine if the push is acceptable based
on the target repository and branch(es), the commits which are to be
pushed, and even the source branches in some cases.
Signed-off-by: Aaron Schrab <aaron@schrab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a single SVN repository is split into multiple Git repositories
many SVN revisions will exist in only one of the Git repositories
created. For some projects the only way to build a working artifact is
to check out corresponding versions of various repositories, with no
indication of what those are in the Git world - in the SVN world the
revision numbers are sufficient.
By adding "--before" to "git-svn find-rev" we can say "tell me what this
repository looked like when that other repository looked like this":
git svn find-rev --before \
r$(git --git-dir=/over/there.git svn find-rev HEAD)
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When resetting with paths, we no longer require a commit argument, but
only a tree-ish. Update the documentation and synopsis accordingly.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users do want to write a line that begin with a pound sign, #,
in their commit log message. Many tracking system recognise
a token of #<bugid> form, for example.
The support we offer these use cases is not very friendly to the end
users. They have a choice between
- Don't do it. Avoid such a line by rewrapping or indenting; and
- Use --cleanup=whitespace but remove all the hint lines we add.
Give them a way to set a custom comment char, e.g.
$ git -c core.commentchar="%" commit
so that they do not have to do either of the two workarounds.
[jc: although I started the topic, all the tests and documentation
updates, many of the call sites of the new strbuf_add_commented_*()
functions, and the change to git-submodule.sh scripted Porcelain are
from Ralf.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since command line options have higher priority than config file
variables and taking previous commit into account, we need a way
how to specify myers algorithm on command line. However,
inventing `--myers` is not the right answer. We need far more
general option, and that is `--diff-algorithm`.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users or projects prefer different algorithms over others, e.g.
patience over myers or similar. However, specifying appropriate
argument every time diff is to be used is impractical. Moreover,
creating an alias doesn't play nicely with other tools based on diff
(git-show for instance). Hence, a configuration variable which is able
to set specific algorithm is needed. For now, these four values are
accepted: 'myers' (which has the same effect as not setting the config
variable at all), 'minimal', 'patience' and 'histogram'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It finds its upstream and applies the commit properly, but
the sync step will fail unless it is told which branch to
work on.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is legal to sync a branch with a different name than
refs/remotes/p4/master, and to do so even when master does
not exist.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a clone or sync, --branch says where the newly imported
branch should go, or which existing branch to sync up. It
takes an argument, which is currently either something that
starts with "refs/", or if not, "refs/heads/p4" is prepended.
Putting it in heads seems like a bad default; these should
go in remotes/p4/ in most situations. Make that the new default,
and be more liberal in the form of the branch name.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that the example on how to use git-p4.branchList
works if typed directly. In particular, it does not make sense
to set a config variable until the git repository has been
initialized.
Reported-by: Olivier Delalleau <shish@keba.be>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the --branch argument to "git p4 clone", one
might specify a destination for p4 changes different from
the default refs/remotes/p4/master. Both cases should
create a master branch and checkout files.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal logic had to deal with two representations of a death
of a child process by a signal.
* jk/unify-exit-code-by-receiving-signal:
run-command: encode signal death as a positive integer
Teach "format-patch" to prefix v4- to its output files for the
fourth iteration of a patch series, to make it easier for the
submitter to keep separate copies for iterations.
* jc/format-patch-reroll:
format-patch: give --reroll-count a short synonym -v
format-patch: document and test --reroll-count
format-patch: add --reroll-count=$N option
get_patch_filename(): split into two functions
get_patch_filename(): drop "just-numbers" hack
get_patch_filename(): simplify function signature
builtin/log.c: stop using global patch_suffix
builtin/log.c: drop redundant "numbered_files" parameter from make_cover_letter()
builtin/log.c: drop unused "numbered" parameter from make_cover_letter()
* jc/submittingpatches:
SubmittingPatches: give list and maintainer addresses
SubmittingPatches: remove overlong checklist
SubmittingPatches: mention subsystems with dedicated repositories
SubmittingPatches: who am I and who cares?
When attempting to read the XDG-style $HOME/.config/git/config and
finding that $HOME/.config/git is a file, we gave a wrong error
message, instead of treating the case as "a custom config file does
not exist there" and moving on.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
--depth is explained as deepen, but the way it's applied, it can
shorten the history as well. Keen users may have noticed the
implication by the phrase "the specified number of commits from the
tip of each remote branch". Put "shorten" in the description to make
it clearer.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can do --depth=2147483647 (*) for restoring complete repo
now. But it's hard to remember. Any other numbers larger than the
longest commit chain in the repository would also do, but some
guessing may be involved. Make easy-to-remember --unshallow an alias
for --depth=2147483647.
Make upload-pack recognize this special number as infinite depth. The
effect is essentially the same as before, except that upload-pack is
more efficient because it does not have to traverse to the bottom
anymore.
The chance of a user actually wanting exactly 2147483647 commits
depth, not infinite, on a repository with a history that long, is
probably too small to consider. The client can learn to add or
subtract one commit to avoid the special treatment when that actually
happens.
(*) This is the largest positive number a 32-bit signed integer can
contain. JGit and older C Git store depth as "int" so both are OK
with this number. Dulwich does not support shallow clone.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor and generally clean up the directory traversal API
implementation.
* as/dir-c-cleanup:
dir.c: rename free_excludes() to clear_exclude_list()
dir.c: refactor is_path_excluded()
dir.c: refactor is_excluded()
dir.c: refactor is_excluded_from_list()
dir.c: rename excluded() to is_excluded()
dir.c: rename excluded_from_list() to is_excluded_from_list()
dir.c: rename path_excluded() to is_path_excluded()
dir.c: rename cryptic 'which' variable to more consistent name
Improve documentation and comments regarding directory traversal API
api-directory-listing.txt: update to match code
Allows pathname patterns in .gitignore and .gitattributes files
with double-asterisks "foo/**/bar" to match any number of directory
hierarchies.
* nd/wildmatch:
wildmatch: replace variable 'special' with better named ones
compat/fnmatch: respect NO_FNMATCH* even on glibc
wildmatch: fix "**" special case
t3070: Disable some failing fnmatch tests
test-wildmatch: avoid Windows path mangling
Support "**" wildcard in .gitignore and .gitattributes
wildmatch: make /**/ match zero or more directories
wildmatch: adjust "**" behavior
wildmatch: fix case-insensitive matching
wildmatch: remove static variable force_lower_case
wildmatch: make wildmatch's return value compatible with fnmatch
t3070: disable unreliable fnmatch tests
Integrate wildmatch to git
wildmatch: follow Git's coding convention
wildmatch: remove unnecessary functions
Import wildmatch from rsync
ctype: support iscntrl, ispunct, isxdigit and isprint
ctype: make sane_ctype[] const array
Conflicts:
Makefile
Teach "log.mailmap" configuration variable to turn "--use-mailmap"
option on to "git log", "git show" and "git whatchanged".
The "--no-use-mailmap" option from the command line can countermand
the setting.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --use-mailmap option to log commands. It allows to display
names from mailmap file when displaying logs, whatever the format
used.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default of the "cleanup" option in "git commit"
is not configurable. Users who don't want to use the
default have to pass this option on every commit since
there's no way to configure it. This commit introduces
a new config option "commit.cleanup" which can be used
to change the default of the "cleanup" option in
"git commit".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old phrasing indicated that the EMAIL environment variable takes
precedence over the user.email configuration setting, but it is the
other way around.
Signed-off-by: Peter Eisentraut <peter@eisentraut.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The options in git-fast-import(1) are not currently arranged in a
logical order, which has caused the '--done' options to be documented
twice (commit 3266de10).
Rearrange them into logical groups under subheadings.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The descriptions of '--relative-marks' and '--no-relative-marks' make
more sense when read together instead of as two independent options.
Combine them into a single description block.
Signed-off-by: John Keeping <john@keeping.me.uk>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 00d3947 (Teach --wrap to only indent without wrapping) added
special behaviour for a width of zero in the '-w' argument to
'git-shortlog' but this was not documented. Fix this.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach various forms of "format-patch" command line to identify what
branch the patches are taken from, so that the branch description
is picked up in more cases.
* nd/maint-branch-desc-doc:
format-patch: pick up branch description when no ref is specified
format-patch: pick up correct branch name from symbolic ref
t4014: a few more tests on cover letter using branch description
branch: delete branch description if it's empty
config.txt: a few lines about branch.<name>.description
Streamline the document and update with a few e-mail addresses the
patches should be sent to.
* jc/submittingpatches:
SubmittingPatches: give list and maintainer addresses
SubmittingPatches: remove overlong checklist
SubmittingPatches: mention subsystems with dedicated repositories
SubmittingPatches: who am I and who cares?
The '--done' option to git-fast-import is documented twice in its manual
page. Combine the best bits of each description, keeping the location
of the instance that was added first.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deal with a situation where .config/git is a file and we notice
.config/git/config is not readable due to ENOTDIR, not ENOENT.
* jn/warn-on-inaccessible-loosen:
config: exit on error accessing any config file
doc: advertise GIT_CONFIG_NOSYSTEM
config: treat user and xdg config permission problems as errors
config, gitignore: failure to access with ENOTDIR is ok
By the end of a directory traversal, a dir_struct instance will
typically contains pointers to various data structures on the heap.
clear_directory() provides a convenient way to reclaim that memory.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously each exclude_list could potentially contain patterns
from multiple sources. For example dir->exclude_list[EXC_FILE]
would typically contain patterns from .git/info/exclude and
core.excludesfile, and dir->exclude_list[EXC_DIRS] could contain
patterns from multiple per-directory .gitignore files during
directory traversal (i.e. when dir->exclude_stack was more than
one item deep).
We split these composite exclude_lists up into three groups of
exclude_lists (EXC_CMDL / EXC_DIRS / EXC_FILE as before), so that each
exclude_list now contains patterns from a single source. This will
allow us to cleanly track the origin of each pattern simply by adding
a src field to struct exclude_list, rather than to struct exclude,
which would make memory management of the source string tricky in the
EXC_DIRS case where its contents are dynamically generated.
Similarly, by moving the filebuf member from struct exclude_stack to
struct exclude_list, it allows us to track and subsequently free
memory buffers allocated during the parsing of all exclude files,
rather than only tracking buffers allocated for files in the EXC_DIRS
group.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for the ALLOC_GROW API implicitly encouraged
developers to use "ary" as the variable name for the array which is
dynamically grown. However "ary" is an unusual abbreviation hardly
used anywhere else in the source tree, and it is also better to name
variables based on their contents not on their type.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building manual pages, the source text is transformed to XML with
AsciiDoc before the man pages are generated from the XML with xmlto.
Fix the dependencies in the Makefile so that the XML files are rebuilt
when asciidoc.conf changes and not just the manual pages from
unchanged XML, and move the dependencies from a recipeless rule to the
rules with commands that use asciidoc.conf to make the dependencies
easier to understand and maintain.
Reported-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a sub-command dies due to a signal, we encode the
signal number into the numeric exit status as "signal -
128". This is easy to identify (versus a regular positive
error code), and when cast to an unsigned integer (e.g., by
feeding it to exit), matches what a POSIX shell would return
when reporting a signal death in $? or through its own exit
code.
So we have a negative value inside the code, but once it
passes across an exit() barrier, it looks positive (and any
code we receive from a sub-shell will have the positive
form). E.g., death by SIGPIPE (signal 13) will look like
-115 to us in inside git, but will end up as 141 when we
call exit() with it. And a program killed by SIGPIPE but run
via the shell will come to us with an exit code of 141.
Unfortunately, this means that when the "use_shell" option
is set, we need to be on the lookout for _both_ forms. We
might or might not have actually invoked the shell (because
we optimize out some useless shell calls). If we didn't invoke
the shell, we will will see the sub-process's signal death
directly, and run-command converts it into a negative value.
But if we did invoke the shell, we will see the shell's
128+signal exit status. To be thorough, we would need to
check both, or cast the value to an unsigned char (after
checking that it is not -1, which is a magic error value).
Fortunately, most callsites do not care at all whether the
exit was from a code or from a signal; they merely check for
a non-zero status, and sometimes propagate the error via
exit(). But for the callers that do care, we can make life
slightly easier by just using the consistent positive form.
This actually fixes two minor bugs:
1. In launch_editor, we check whether the editor died from
SIGINT or SIGQUIT. But we checked only the negative
form, meaning that we would fail to notice a signal
death exit code which was propagated through the shell.
2. In handle_alias, we assume that a negative return value
from run_command means that errno tells us something
interesting (like a fork failure, or ENOENT).
Otherwise, we simply propagate the exit code. Negative
signal death codes confuse us, and we print a useless
"unable to run alias 'foo': Success" message. By
encoding signal deaths using the positive form, the
existing code just propagates it as it would a normal
non-zero exit code.
The downside is that callers of run_command can no longer
differentiate between a signal received directly by the
sub-process, and one propagated. However, no caller
currently cares, and since we already optimize out some
calls to the shell under the hood, that distinction is not
something that should be relied upon by callers.
Fix the same logic in t/test-terminal.perl for consistency [jc:
raised by Jonathan in the discussion].
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of 'integrate with the tip of the remote branch, not
the commit recorded in the superproject gitlink' support.
* wk/submodule-update-remote:
submodule add: If --branch is given, record it in .gitmodules
submodule update: add --remote for submodule's upstream changes
submodule: add get_submodule_config helper funtion
Allow scripts to feed literal paths to commands that take
pathspecs, by disabling wildcard globbing.
* jk/pathspec-literal:
add global --literal-pathspecs option
Conflicts:
dir.c
Introduce "log --format=%C(auto,blue)Foo%C(auto,reset)" that does
not color its output when writing to a non-terminal.
* jc/format-color-auto:
log --format: teach %C(auto,black) to respect color config
t6006: clean up whitespace
Allow us to read, and default to read, mailmap files from the tip
of the history in bare repositories. This will help running tools
like shortlog in server settings.
* jk/mailmap-from-blob:
mailmap: default mailmap.blob in bare repositories
mailmap: fix some documentation loose-ends for mailmap.blob
mailmap: clean up read_mailmap error handling
mailmap: support reading mailmap from blobs
mailmap: refactor mailmap parsing for non-file sources
Require "-f" for push to update a tag, even if it is a fast-forward.
* cr/push-force-tag-update:
push: allow already-exists advice to be disabled
push: rename config variable for more general use
push: cleanup push rules comment
push: clarify rejection of update to non-commit-ish
push: require force for annotated tags
push: require force for refs under refs/tags/
push: flag updates that require force
push: keep track of "update" state separately
push: add advice for rejected tag reference
push: return reject reasons as a bitset
Various updates to fast-export used in the context of the remote
helper interface.
* fc/fast-export-fixes:
fast-export: make sure updated refs get updated
fast-export: don't handle uninteresting refs
fast-export: fix comparison in tests
fast-export: trivial cleanup
remote-testgit: implement the "done" feature manually
remote-testgit: report success after an import
remote-testgit: exercise more features
remote-testgit: cleanup tests
remote-testgit: remove irrelevant test
remote-testgit: remove non-local functionality
Add new simplified git-remote-testgit
Rename git-remote-testgit to git-remote-testpy
remote-helpers: fix failure message
remote-testgit: fix direction of marks
fast-export: avoid importing blob marks
Accept "-v" as a synonym to "--reroll-count", so that users can say
"git format-patch -v4 master", instead of having to fully spell it
out as "git format-patch --reroll-count=4 master".
As I do not think of a reason why users would want to tell the
command to be "verbose", I think this should be OK.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The flow described in the document is still correct, but over time I
have automated various parts of the workflow with tools and their
use was not explained at all.
Update it and outline the use of two key scripts from the 'todo'
branch, "Reintegrate" and "cook".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various fixes that have been cooking in 'next' have been merged. All
of them should go to 'maint' for 1.8.1.1 later.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --graph code fell into infinite loop when asked to do what the
code did not expect.
* mk/maint-graph-infinity-loop:
graph.c: infinite loop in git whatchanged --graph -m
An element on GIT_CEILING_DIRECTORIES list that does not name the
real path to a directory (i.e. a symbolic link) could have caused
the GIT_DIR discovery logic to escape the ceiling.
* mh/ceiling:
string_list_longest_prefix(): remove function
setup_git_directory_gently_1(): resolve symlinks in ceiling paths
longest_ancestor_length(): require prefix list entries to be normalized
longest_ancestor_length(): take a string_list argument for prefixes
longest_ancestor_length(): use string_list_split()
Introduce new function real_path_if_valid()
real_path_internal(): add comment explaining use of cwd
Introduce new static function real_path_internal()
We told readers to "send it to the list" (or the maintainer) without
telling what addresses are to be used. Correct this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The section is no longer a concise checklist. It also talks about
things that are not covered in the "Long version" text, which means
people need to read both, covering more or less the same thing in
different phrasing.
Fold the details into the main text and remove the section.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not necessarily every bundle file can be cloned from. Only the ones
that do not need prerequisites can.
When 1d52b02 (Documentation: minor grammatical fixes and rewording
in git-bundle.txt, 2009-03-22) reworded this paragraph, it lost a
critical hint to tell readers why this particular bundle can be
cloned from. Resurrect it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were only mentioned in periodical "A note from the maintainer"
posting and not in the documentation suite. SubmittingPatches has a
section to help contributors decide on what commit to base their
changes, which is the most suitable place for this information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The introductory text in the "long version" talks about the origin
of this document with "I started ...", but it is unclear who that I
is, and more importantly, it is not interesting how it was started.
Just state the purpose of the document to help readers decide if it
is releavant to them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the bundle created in the example does not record HEAD, "git
clone" will not check out the files to the working tree:
$ git clone pr.bundle q/
Cloning into 'q'...
Receiving objects: 100% (619/619), 13.52 MiB | 18.74 MiB/s, done.
Resolving deltas: 100% (413/413), done.
warning: remote HEAD refers to nonexistent ref, unable to checkout.
Avoid alarming the readers by adding "-b master" to the example. A
better fix may be to arrange the bundle created in the earlier step
to record HEAD, so that it can be cloned without this workaround.
Signed-off-by: Brilliantov Kirill Vladimirovich <brilliantov@inbox.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
traversal API has a few potentially confusing properties. These
comments clarify a few key aspects and will hopefully make it easier
to understand for other newcomers in the future.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
7c4c97c0ac turned the flags in struct dir_struct into a single bitfield
variable, but forgot to update this document.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parsecvs code has been neglected for a long time, and the only
public version does not even build correctly. I have been handed
control of the project and intend to fix this, but until I do it
cannot be recommended.
Also, the project URL given for Subversion needed to be updated
to follow their site move.
Signed-off-by: Eric S. Raymond <esr@thyrsus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We earlier removed a link to list of contributors that pointed to a
defunct page; let's use a working one from Ohloh.net to replace it
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sl/maint-git-svn-docs:
git-svn: Note about tags.
git-svn: Expand documentation for --follow-parent
git-svn: Recommend use of structure options.
git-svn: Document branches with at-sign(@).
Document that 'git svn' will import SVN tags as branches.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe what the option --follow-parent does, and what happens if it is
set or unset.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that when using git svn, one should usually either use the
directory structure options to import branches as branches, or only
import one subdirectory. The default behaviour of cloning all branches
and tags as subdirectories in the working copy is usually not what the
user wants.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn sometimes creates branches with an at-sign in the name
(branchname@revision). These branches confuse many users and it is a FAQ
why they are created. Document when git svn creates them.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the distant past, the order things were documented was
'Invocation', 'Commands', 'Capabilities', ...
Then it was decided that before giving a list of Commands, there
should be an overall description of the 'Input format', which was
a wise decision. However, this description was put as the very
first thing, with the rationale that any implementor would want
to know that first.
However, it seems an implementor would actually first need to
know how the remote helper will be invoked, so moving
'Invocation' to the front again seems logical. Moreover, we now
don't switch from discussing the input format to the invocation
style and then back to input related stuff.
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
19299a8 (Documentation: Move diff.<driver>.* from config.txt to
diff-config.txt, 2011-04-07) moved the diff configuration options to
diff-config.txt, but forgot about diff.wordRegex, which was left
behind in config.txt. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file is rather outdated and IMHO shouldn't be there in the first place.
(If there are translations of the Git documentation they are better be kept
separate from the original documentation.)
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ta/doc-cleanup:
Documentation: build html for all files in technical and howto
Documentation/howto: convert plain text files to asciidoc
Documentation/technical: convert plain text files to asciidoc
Change headline of technical/send-pack-pipeline.txt to not confuse its content with content from git-send-pack.txt
Shorten two over-long lines in git-bisect-lk2009.txt by abbreviating some sha1
Split over-long synopsis in git-fetch-pack.txt into several lines
Howto documents in howto-index.txt were listed in a rather
random order. So better sort them.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff <blob> <blob>" was not documented and was only hinted as
an extension to "git diff <commit> <commit> -- <pathspec>", but
comparison between two blobs are more special than that. It does
not take any pathspec to begin with.
* jc/doc-diff-blobs:
Documentation: Describe "git diff <blob> <blob>" separately
Document the magic "git checkout <no-such-branch>" hack to create
local branch out of a remote tracking branch that hasn't been
documented so far.
* cr/doc-checkout-branch:
Documentation/git-checkout.txt: document 70c9ac2 behavior
Documentation/git-checkout.txt: clarify usage
Avoids invalid sample e-mail addresses from becoming mailto links
in the formatted output.
* jk/avoid-mailto-invalid-in-doc:
Documentation: don't link to example mail addresses
It might be a better idea to move the text the bottom one adds to
the extended description from the quick checklist part.
* as/doc-for-devs:
Documentation: move support for old compilers to CodingGuidelines
SubmittingPatches: add convention of prefixing commit messages
"git fetch --tags" was explained as if it were "git fetch
--no-no-tags", which is not the case, causing confusion.
* jc/fetch-tags-doc:
fetch --tags: clarify documentation
* sl/git-svn-docs:
git-svn: Note about tags.
git-svn: Expand documentation for --follow-parent
git-svn: Recommend use of structure options.
git-svn: Document branches with at-sign(@).
The contents of this document does not describe any particular API, but
is more about the way to add a new command, which belongs to the "How To"
section of the documentation suite.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git takes pathspec arguments in many places to limit the
scope of an operation. These pathspecs are treated not as
literal paths, but as glob patterns that can be fed to
fnmatch. When a user is giving a specific pattern, this is a
nice feature.
However, when programatically providing pathspecs, it can be
a nuisance. For example, to find the latest revision which
modified "$foo", one can use "git rev-list -- $foo". But if
"$foo" contains glob characters (e.g., "f*"), it will
erroneously match more entries than desired. The caller
needs to quote the characters in $foo, and even then, the
results may not be exactly the same as with a literal
pathspec. For instance, the depth checks in
match_pathspec_depth do not kick in if we match via fnmatch.
This patch introduces a global command-line option (i.e.,
one for "git" itself, not for specific commands) to turn
this behavior off. It also has a matching environment
variable, which can make it easier if you are a script or
porcelain interface that is going to issue many such
commands.
This option cannot turn off globbing for particular
pathspecs. That could eventually be done with a ":(noglob)"
magic pathspec prefix. However, that level of granularity is
more cumbersome to use for many cases, and doing ":(noglob)"
right would mean converting the whole codebase to use
"struct pathspec", as the usual "const char **pathspec"
cannot represent extra per-item flags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows you to easily record a submodule.<name>.branch option in
.gitmodules when you add a new submodule. With this patch,
$ git submodule add -b <branch> <repository> [<path>]
$ git config -f .gitmodules submodule.<path>.branch <branch>
reduces to
$ git submodule add -b <branch> <repository> [<path>]
This means that future calls to
$ git submodule update --remote ...
will get updates from the same branch that you used to initialize the
submodule, which is usually what you want.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current `update` command incorporates the superproject's gitlinked
SHA-1 ($sha1) into the submodule HEAD ($subsha1). Depending on the
options you use, it may checkout $sha1, rebase the $subsha1 onto
$sha1, or merge $sha1 into $subsha1. This helps you keep up with
changes in the upstream superproject.
However, it's also useful to stay up to date with changes in the
upstream subproject. Previous workflows for incorporating such
changes include the ungainly:
$ git submodule foreach 'git checkout $(git config --file $toplevel/.gitmodules submodule.$name.branch) && git pull'
With this patch, all of the useful functionality for incorporating
superproject changes can be reused to incorporate upstream subproject
updates. When you specify --remote, the target $sha1 is replaced with
a $sha1 of the submodule's origin/master tracking branch. If you want
to merge a different tracking branch, you can configure the
`submodule.<name>.branch` option in `.gitmodules`. You can override
the `.gitmodules` configuration setting for a particular superproject
by configuring the option in that superproject's default configuration
(using the usual configuration hierarchy, e.g. `.git/config`,
`~/.gitconfig`, etc.).
Previous use of submodule.<name>.branch
=======================================
Because we're adding a new configuration option, it's a good idea to
check if anyone else is already using the option. The foreach-pull
example above was described by Ævar in
commit f030c96d86
Author: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Date: Fri May 21 16:10:10 2010 +0000
git-submodule foreach: Add $toplevel variable
Gerrit uses the same interpretation for the setting, but because
Gerrit has direct access to the subproject repositories, it updates
the superproject repositories automatically when a subproject changes.
Gerrit also accepts the special value '.', which it expands into the
superproject's branch name.
Although the --remote functionality is using `submodule.<name>.branch`
slightly differently, the effect is the same. The foreach-pull
example uses the option to record the name of the local branch to
checkout before pulls. The tracking branch to be pulled is recorded
in `.git/modules/<name>/config`, which was initialized by the module
clone during `submodule add` or `submodule init`. Because the branch
name stored in `submodule.<name>.branch` was likely the same as the
branch name used during the initial `submodule add`, the same branch
will be pulled in each workflow.
Implementation details
======================
In order to ensure a current tracking branch state, `update --remote`
fetches the submodule's remote repository before calculating the
SHA-1. However, I didn't change the logic guarding the existing fetch:
if test -z "$nofetch"
then
# Run fetch only if $sha1 isn't present or it
# is not reachable from a ref.
(clear_local_git_env; cd "$path" &&
( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) &&
test -z "$rev") || git-fetch)) ||
die "$(eval_gettext "Unable to fetch in submodule path '\$path'")"
fi
There will not be a double-fetch, because the new $sha1 determined
after the `--remote` triggered fetch should always exist in the
repository. If it doesn't, it's because some racy process removed it
from the submodule's repository and we *should* be re-fetching.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As it was not a common operation, it was described as if it is a
side note for the more common two-commit variant, but this mode
behaves very differently, e.g. it does not make any sense to ask
recursive behaviour, or give the command a pathspec.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the behavior implemented in 70c9ac2 (DWIM "git checkout
frotz" to "git checkout -b frotz origin/frotz").
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The forms of checkout that do not take a path are lumped together in
the DESCRIPTION section, but the description for this group is
dominated by explanation of the -b|-B form.
Split these apart for more clarity.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, %C(color attr) always emitted the ANSI color
sequence; it was up to the scripts that wanted to conditionally
color their output to omit %C(...) specifier when they do not want
colors.
Optionally allow "auto," to be prefixed to the color, so that the
output is colored iff we would color regular "log" output
(e.g., taking into account color.* and --color command line
options).
Tests and pretty_context bits by Jeff King <peff@peff.net>.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Try to be nice to older C compilers" text is clearly a guideline
to be borne in mind whilst coding rather than when submitting patches.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conscientious newcomers to git development will read SubmittingPatches
and CodingGuidelines, but could easily miss the convention of
prefixing commit messages with a single word identifying the file
or area the commit touches.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Email addresses in documentation are converted into mailto: hyperlinks
in the HTML output and footnotes in man pages. This isn't desirable for
cases where the address is used as an example and is not valid.
Particularly annoying is the example "jane@laptop.(none)" which appears
in git-shortlog(1) as "jane@laptop[1].(none)", with note 1 saying:
1. jane@laptop
mailto:jane@laptop
Fix this by escaping these email addresses with a leading backslash, to
prevent Asciidoc expanding them as inline macros.
In the case of mailmap.txt, render the address monospaced so that it
matches the block examples surrounding that paragraph.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start list with 1 instead of 0; ASCIIDOC will renumber it anyway.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explain that --tags is just like another explicit refspec on the
command line and as such overrides the default refspecs configured
via the remote.$name.fetch variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike other environment variables (e.g. GIT_WORK_TREE, GIT_NAMESPACE),
the Documentation/git.txt file did not mention that the GIT_DIR
environment variable can also be set using the --git-dir command line
option.
Signed-off-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The motivation for mailmap.blob is to let users of bare
repositories use the mailmap feature, as they would not have
a checkout containing the .mailmap file. We can make it even
easier for them by just looking in HEAD:.mailmap by default.
We can't know for sure that this is where they would keep a
mailmap, of course, but it is the best guess (and it matches
the non-bare behavior, which reads from HEAD:.mailmap in the
working tree). If it's missing, git will silently ignore the
setting.
We do not do the same magic in the non-bare case, because:
1. In the common case, HEAD:.mailmap will be the same as
the .mailmap in the working tree, which is a no-op.
2. In the uncommon case, the user has modified .mailmap
but not yet committed it, and would expect the working
tree version to take precedence.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Anywhere we mention mailmap.file, it is probably worth
mentioning mailmap.blob, as well.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A cache-tree entry with a negative entry count is considered invalid
by the current Git; it records that we do not know the object name
of a tree that would result by writing the directory covered by the
cache-tree as a tree object.
Clarify that any entry with a negative entry count is invalid, but
the implementations must write -1 there. This way, we can later
decide to allow writers to use negative values other than -1 to
encode optional information on such invalidated entries without
harming interoperability; we do not know what will be encoded and
how, so we keep these other negative values as reserved for now.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We earlier removed a link to list of contributors that pointed to a
defunct page; let's use a working one from Ohloh.net to replace it
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a bare repository, there isn't a simple way to respect an
in-tree mailmap without extracting it to a temporary file.
This patch provides a config variable, similar to
mailmap.file, which reads the mailmap from a blob in the
repository.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 1.8.0.2
Documentation/git-stash.txt: add a missing verb
git(1): remove a defunct link to "list of authors"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The linked page has not been showing the promised "more complete
list" for more than 6 months by now, and nobody has resurrected
the list there nor elsewhere since then.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line that happens to begin with indent followed by "3. " was
interpreted as if it was an enumerated list; just wrap the lines
differently to work it around for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was misleading in that it gave the impression that
'for-push' could be used as a ref attribute in the output of the
'list' command. That is wrong.
Also, explicitly point out the connection between the commands
'list' and 'options' on the one hand, and the sections
'REF LIST ATTRIBUTES' and 'OPTIONS' on the other hand.
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, document 'list for-push' separately from 'list', as
the former needs only be supported for the push/export
capabilities, and the latter only for fetch/import. Indeed, a
hypothetically 'push-only' helper would only need to support the
former, not the latter.
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also remove some duplication in the descriptions
(e.g. refspec was explained twice with similar level of detail).
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Specifically, document the 'export' and '(im|ex)port-marks'
capabilities as well as the export command, which were
undocumented (but in active use).
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the distant past, the order things were documented was
'Invocation', 'Commands', 'Capabilities', ...
Then it was decided that before giving a list of Commands, there
should be an overall description of the 'Input format', which was
a wise decision. However, this description was put as the very
first thing, with the rationale that any implementor would want
to know that first.
However, it seems an implementor would actually first need to
know how the remote helper will be invoked, so moving
'Invocation' to the front again seems logical. Moreover, we now
don't switch from discussing the input format to the invocation
style and then back to input related stuff.
Signed-off-by: Max Horn <max@quendi.de>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that 'git svn' will import SVN tags as branches.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe what the option --follow-parent does, and what happens if it is
set or unset.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that when using git svn, one should usually either use the
directory structure options to import branches as branches, or only
import one subdirectory. The default behaviour of cloning all branches
and tags as subdirectories in the working copy is usually not what the
user wants.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn sometimes creates branches with an at-sign in the name
(branchname@revision). These branches confuse many users and it is a FAQ
why they are created. Document when git svn creates them.
Signed-off-by: Sebastian Leske <sebastian.leske@sleske.name>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'advice.pushAlreadyExists' option to disable the advice shown when
an update is rejected for a reference that is not allowed to update at
all (verses those that are allowed to fast-forward.)
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'pushNonFastForward' advice config can be used to squelch several
instances of push-related advice. Rename it to 'pushUpdateRejected' to
cover other reject scenarios that are unrelated to fast-forwarding.
Retain the old name for compatibility.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not allow fast-forwarding of references that point to a tag object.
Updating from a tag is potentially destructive since it would likely
leave the tag dangling. Disallowing updates to a tag also makes sense
semantically and is consistent with the behavior of lightweight tags.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References are allowed to update from one commit-ish to another if the
former is an ancestor of the latter. This behavior is oriented to
branches which are expected to move with commits. Tag references are
expected to be static in a repository, though, thus an update to
something under refs/tags/ should be rejected unless the update is
forced.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Exercising the python remote helper framework is for another tool and
another test. This is about testing the remote-helper interface.
It's way simpler, it exercises the same features of remote helpers, it's
easy to read and understand, and it doesn't depend on python.
For now let's just copy the old remote-helpers test script, although
some of those tests don't make sense. In addition, this script would be
able to test other features not currently being tested.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation mentioned only newlines and double quotes as
characters needing escaping, but the backslash also needs it. Also, the
documentation was not clearly saying that double quotes around the file
name were required (double quotes in the examples could be interpreted as
part of the sentence, not part of the actual string).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The context of the example to push into refs/remotes/satellite/
hierarchy of the other repository needs to be spelled out explicitly
for the value of this example to be fully appreciated. Make it so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current version contains the sentence:
Further suppose that the other person already pushed changes leading to
A back to the original repository you two obtained the original commit
X.
which doesn't parse for me; I've changed it to
Further suppose that the other person already pushed changes leading to
A back to the original repository from which you two obtained the
original commit X.
Signed-off-by: Mark Szepieniec <mszepien@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This document contains no new policies or proposals; it attempts to
document established practices and interface requirements.
Signed-off-by: Eric S. Raymond <esr@thyrsus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow "git diff --submodule=log" to set to be the default via
configuration.
* rr/submodule-diff-config:
submodule: display summary header in bold
diff: rename "set" variable
diff: introduce diff.submodule configuration variable
Documentation: move diff.wordRegex from config.txt to diff-config.txt
* ta/doc-cleanup:
Documentation: build html for all files in technical and howto
Documentation/howto: convert plain text files to asciidoc
Documentation/technical: convert plain text files to asciidoc
Change headline of technical/send-pack-pipeline.txt to not confuse its content with content from git-send-pack.txt
Shorten two over-long lines in git-bisect-lk2009.txt by abbreviating some sha1
Split over-long synopsis in git-fetch-pack.txt into several lines
Introduce a diff.submodule configuration variable corresponding to the
'--submodule' command-line option of 'git diff'.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
19299a8 (Documentation: Move diff.<driver>.* from config.txt to
diff-config.txt, 2011-04-07) moved the diff configuration options to
diff-config.txt, but forgot about diff.wordRegex, which was left
behind in config.txt. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare the release notes for the upcoming release, and describe
changes up to the 5th batch we just merged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emit the notes attached to the commit in "format-patch --notes"
output after three-dashes.
* jc/prettier-pretty-note:
format-patch: add a blank line between notes and diffstat
Doc User-Manual: Patch cover letter, three dashes, and --notes
Doc format-patch: clarify --notes use case
Doc notes: Include the format-patch --notes option
Doc SubmittingPatches: Mention --notes option after "cover letter"
Documentation: decribe format-patch --notes
format-patch --notes: show notes after three-dashes
format-patch: append --signature after notes
pretty_print_commit(): do not append notes message
pretty: prepare notes message at a centralized place
format_note(): simplify API
pretty: remove reencode_commit_message()
Improve the asymptotic performance of the cat_sort_uniq notes merge
strategy.
* mh/notes-string-list:
string_list_add_refs_from_colon_sep(): use string_list_split()
notes: fix handling of colon-separated values
combine_notes_cat_sort_uniq(): sort and dedup lines all at once
Initialize sort_uniq_list using named constant
string_list: add a function string_list_remove_empty_items()
Allows "cvsimport" to read per-author timezone from the author info
file.
* cr/cvsimport-local-zone:
cvsimport: work around perl tzset issue
git-cvsimport: allow author-specific timezones
Add "symbolic-ref -d SYM" to delete a symbolic ref SYM.
It is already possible to remove a symbolic ref with "update-ref -d
--no-deref", but it may be a good addition for completeness.
* jh/symbolic-ref-d:
git symbolic-ref --delete $symref
293ab15e ("submodule: teach rm to remove submodules unless they
contain a git directory", 2012-09-26) inserted the "Submodules"
section between a sentence describing a command and the command. Move
the "Submodules" section further down.
Noticed-by: Horst H. von Brand
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email --compose" can let the user create a non-ascii
cover letter message, but there was not a way to mark it with
appropriate content type before sending it out.
Further updates fix subject quoting.
* km/send-email-compose-encoding:
git-send-email: add rfc2047 quoting for "=?"
git-send-email: introduce quote_subject()
git-send-email: skip RFC2047 quoting for ASCII subjects
git-send-email: use compose-encoding for Subject
git-send-email: introduce compose-encoding
Start laying the foundation to build the "wildmatch" after we can
agree on its desired semantics.
* nd/attr-match-optim-more:
attr: more matching optimizations from .gitignore
gitignore: make pattern parsing code a separate function
exclude: split pathname matching code into a separate function
exclude: fix a bug in prefix compare optimization
exclude: split basename matching code into a separate function
exclude: stricten a length check in EXC_FLAG_ENDSWITH case
We long ago hyphenated "remote-tracking branch"; this
catches some new instances added since then.
* mm/maint-doc-remote-tracking:
Documentation: remote tracking branch -> remote-tracking branch
Document strbuf_split_buf(), strbuf_split_str(), strbuf_split_max(),
strbuf_split(), and strbuf_list_free() in the header file and in
api-strbuf.txt. (These functions were previously completely
undocumented.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
In e858af6 (commit: document a couple of options) the description of the
--no-post-rewrite option was put inside the paragraph for the --amend
option. Move it down after the paragraph.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jeff King <peff@peff.net>
git commit -S, --gpg-sign was mentioned in the program's help message,
but not in the manpage.
This adds an equivalent entry for the option in the manpage.
Signed-off-by: Tom Jones <tom@oxix.org>
Signed-off-by: Jeff King <peff@peff.net>
Allow an earlier "--short" option on the command line to be
countermanded with the "--long" option for "git status" and "git
commit".
* nd/status-long:
status: add --long output format option
"git log -F -E --grep='<ere>'" failed to use the given <ere>
pattern as extended regular expression, and instead looked for the
string literally. The early part of this series is a fix for it;
the latter part teaches log to respect the grep.* configuration.
* jc/grep-pcre-loose-ends:
log: honor grep.* configuration
log --grep: accept --basic-regexp and --perl-regexp
log --grep: use the same helper to set -E/-F options as "git grep"
revisions: initialize revs->grep_filter using grep_init()
grep: move pattern-type bits support to top-level grep.[ch]
grep: move the configuration parsing logic to grep.[ch]
builtin/grep.c: make configuration callback more reusable
If you remove a submodule, in order to keep the repository so that
"git checkout" to an older commit in the superproject history can
resurrect the submodule, the real repository will stay in $GIT_DIR
of the superproject. A later "git submodule add $path" to add a
different submodule at the same path will fail. Diagnose this case
a bit better, and if the user really wants to add an unrelated
submodule at the same path, give the "--name" option to give it a
place in $GIT_DIR of the superproject that does not conflict with
the original submodule.
* jl/submodule-add-by-name:
submodule add: Fail when .git/modules/<name> already exists unless forced
Teach "git submodule add" the --name option
"git rm submodule" cannot blindly remove a submodule directory as
its working tree may have local changes, and worse yet, it may even
have its repository embedded in it. Teach it some special cases
where it is safe to remove a submodule, specifically, when there is
no local changes in the submodule working tree, and its repository
is not embedded in its working tree but is elsewhere and uses the
gitfile mechanism to point at it.
* jl/submodule-rm:
submodule: teach rm to remove submodules unless they contain a git directory
This function was added in f103f95b11 in
the erroneous expectation that it would be used in the
reimplementation of longest_ancestor_length(). But it turned out to
be easier to use a function specialized for comparing path prefixes
(i.e., one that knows about slashes and root paths) than to prepare
the paths in such a way that a generic string prefix comparison
function can be used. So delete string_list_longest_prefix() and its
documentation and test cases.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
You can override an option set in the LESS variable by simply prefixing
the command line option with `-+`. This is more robust than the previous
example if the default LESS options are to ever change.
Signed-off-by: Patrick Palka <patrick@parcs.ath.cx>
Signed-off-by: Jeff King <peff@peff.net>
The git-reset's "<mode>" is an optional argument, however it was
documented as required.
The "<mode>" is documented as one of: --soft, --mixed, --hard, --merge
or --keep, so "<mode>" should be used instead of "--<mode>".
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Jeff King <peff@peff.net>
Show that git format-patch can have a cover letter, include patch
commentary below the three dashes, and notes can also be
included.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff King <peff@peff.net>
The --log-window-size parameter to git-svn fetch is undocumented.
Minimally describe what it does and why the user might change it.
Signed-off-by: Gunnlaugur Þór Briem <gunnlaugur@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Remove double negative, and include the repeat usage across
versions of a patch series.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff King <peff@peff.net>
This change was already done by 0e615b252f (Matthieu Moy, Tue Nov 2
2010, Replace "remote tracking" with "remote-tracking"), but new
instances of remote tracking (without dash) were introduced in the
meantime.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jeff King <peff@peff.net>
A GSoC project.
* fa/remote-svn:
Add a test script for remote-svn
remote-svn: add marks-file regeneration
Add a svnrdump-simulator replaying a dump file for testing
remote-svn: add incremental import
remote-svn: Activate import/export-marks for fast-import
Create a note for every imported commit containing svn metadata
vcs-svn: add fast_export_note to create notes
Allow reading svn dumps from files via file:// urls
remote-svn, vcs-svn: Enable fetching to private refs
When debug==1, start fast-import with "--stats" instead of "--quiet"
Add documentation for the 'bidi-import' capability of remote-helpers
Connect fast-import to the remote-helper via pipe, adding 'bidi-import' capability
Add argv_array_detach and argv_array_free_detached
Add svndump_init_fd to allow reading dumps from arbitrary FDs
Add git-remote-testsvn to Makefile
Implement a remote helper for svn in C
Teaches a new configuration variable to "git diff" Porcelain and
its friends.
* jm/diff-context-config:
t4055: avoid use of sed 'a' command
diff: diff.context configuration gives default to -U
git format-patch gained a --notes option. Tell the notes user.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff King <peff@peff.net>
The git format-patch --notes option can now insert the commit notes
after the three dashes. Mention this after the regular cover letter
guidance for submitting patches.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff King <peff@peff.net>
These files were recently revised to be valid asciidoc, so
there is no reason not to build html versions.
Signed-off-by: Thomas Ackermann <th.acker66@arcor.de>
Signed-off-by: Jeff King <peff@peff.net>
Use "-b <branch>" instead of "-b branch". This brings the usage
strings in line with other options, e.g. "--reference <repository>".
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Jeff King <peff@peff.net>
Teach symbolic-ref to delete symrefs by adding the -d/--delete option to
git-symbolic-ref. Both proper and dangling symrefs are deleted by this
option, but other refs - or anything else that is not a symref - is not.
The symref deletion is performed by first verifying that we are given a
proper symref, and then invoking delete_ref() on it with the REF_NODEREF
flag.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though I coded this, I am not sure what use scenarios would benefit
from this option, so the description is unnecessarily negative at this
moment. People who do want to use this feature need to come up with a
more plausible use case and replace it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can currently set the output format to --short or
--porcelain. There is no --long, because we default to it
already. However, you may want to override an alias that
uses "--short" to get back to the default.
This requires a little bit of refactoring, because currently
we use STATUS_FORMAT_LONG internally to mean the same as
"the user did not specify anything". By expanding the enum
to include STATUS_FORMAT_NONE, we can distinguish between
the implicit and explicit cases. This effects these
conditions:
1. The user has asked for NUL termination. With NONE, we
currently default to turning on the porcelain mode.
With an explicit --long, we would in theory use NUL
termination with the long mode, but it does not support
it. So we can just complain and die.
2. When an output format is given to "git commit", we
default to "--dry-run". This behavior would now kick in
when "--long" is given, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were not originally meant for asciidoc, but they are already
so close. Mark them up in asciidoc.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* po/maint-docs:
Doc branch: show -vv option and alternative
Doc clean: add See Also link
Doc add: link gitignore
Doc: separate gitignore pattern sources
Doc: shallow clone deepens _to_ new depth
* jc/ll-merge-binary-ours:
ll-merge: warn about inability to merge binary files only when we can't
attr: "binary" attribute should choose built-in "binary" merge driver
merge: teach -Xours/-Xtheirs to binary ll-merge driver
CVS patchsets are imported with timestamps having an offset of +0000
(UTC). The cvs-authors file is already used to translate the CVS
username to full name and email in the corresponding commit. Extend
this file to support an optional timezone for calculating a user-
specific timestamp offset.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were not originally meant for asciidoc, but they are already
so close. Mark them up in asciidoc.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were used to keep track of the last commit a release notes
entry was written for, and should have been removed when cutting
the final release.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.gitattributes and .gitignore share the same pattern syntax but has
separate matching implementation. Over the years, ignore's
implementation accumulates more optimizations while attr's stays the
same.
This patch reuses the core matching functions that are also used by
excluded_from_list. excluded_from_list and path_matches can't be
merged due to differences in exclude and attr, for example:
* "!pattern" syntax is forbidden in .gitattributes. As an attribute
can be unset (i.e. set to a special value "false") or made back to
unspecified (i.e. not even set to "false"), "!pattern attr" is unclear
which one it means.
* we support attaching attributes to directories, but git-core
internally does not currently make use of attributes on
directories.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On a multiuser system where mortals do not have write access to /etc,
the GIT_CONFIG_NOSYSTEM variable is the best tool we have to keep
getting work done when a syntax error or other problem renders
/etc/gitconfig buggy, until the sysadmin sorts the problem out.
Noticed while experimenting with teaching git to error out when
/etc/gitconfig is unreadable.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the documentation part of
1a9d7e9 (attr.c: read .gitattributes from index as well. - 2007-08-14)
06f33c1 (Read attributes from the index that is being checked out - 2009-03-13)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The introduction email (--compose option) have encoding hardcoded to
UTF-8, but invoked editor may not use UTF-8 encoding.
The encoding used by patches can be changed by the "8bit-encoding"
option, but this option does not have effect on introduction email
and equivalent for introduction email is missing.
Added compose-encoding command line option and sendemail.composeencoding
configuration option specify encoding of introduction email.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we added the "--perl-regexp" option (or "-P") to "git grep", we
should have done the same for the commands in the "git log" family,
but somehow we forgot to do so. This corrects it, but we will
reserve the short-and-sweet "-P" option for something else for now.
Also introduce the "--basic-regexp" option for completeness, so that
the "last one wins" principle can be used to defeat an earlier -E
option, e.g. "git log -E --basic-regexp --grep='<bre>'". Note that
it cannot have the short "-G" option as the option is to grep in the
patch text in the context of "log" family.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not even worth mentioning their removal; just discourage
people from using them.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A repository created with "git clone --single" had its fetch
refspecs set up just like a clone without "--single", leading the
subsequent "git fetch" to slurp all the other branches, defeating
the whole point of specifying "only this branch".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
It was unclear in the documentation for "git blame" that it is
unnecessary for users to use the "--follow" option.
* jc/blame-follows-renames:
git blame: document that it always follows origin across whole-file renames
We support backslash escape, but we hide the details behind the phrase
"a shell glob suitable for consumption by fnmatch(3)". So it may not
be obvious how one can get literal # or ! at the beginning of pattern.
Add a few lines on how to work around the magic characters.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow detaching of ownership of the argv_array's contents and add a
function to free those detached argv_arrays later.
This makes it possible to use argv_array efficiently with the exiting
struct child_process which only contains a member char **argv.
Add to documentation.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Describe the behaviour, but do warn people against taking it too
literally and expect an abbreviation valid today will stay valid
forever.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the commands from the "log" family the "--grep-reflog" option
to limit output by string that appears in the reflog entry when the
"--walk-reflogs" option is in effect.
* nd/grep-reflog:
revision: make --grep search in notes too if shown
log --grep-reflog: reject the option without -g
revision: add --grep-reflog to filter commits by reflog messages
grep: prepare for new header field filter
"git submodule frotz" was not diagnosed as "frotz" being an unknown
subcommand to "git submodule"; the user instead got a complaint that
"git submodule status" was run with an unknown path "frotz".
* rr/maint-submodule-unknown-cmd:
submodule: if $command was not matched, don't parse other args
It already is listed in the "git config" documentation, but people
interested in pushing would first look at "git push" documentation.
Noticed-by: David Glasser
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Fixed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the "blame" documentation to tell the users that there is
no need to ask for "--follow".
* jc/blame-follows-renames:
git blame: document that it always follows origin across whole-file renames
Running "git fetch" in a repository made with "git clone --single"
slurps all the branches, defeating the point of "--single".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
Introduce a configuration variable diff.context that tells
Porcelain commands to use a non-default number of context
lines instead of 3 (the default). With this variable, users
do not have to keep repeating "git log -U8" from the command
line; instead, it becomes sufficient to say "git config
diff.context 8" just once.
Signed-off-by: Jeff Muizelaar <jmuizelaar@mozilla.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-log-grep-all-match-1:
grep.c: make two symbols really file-scope static this time
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
Teach an option to edit the insn sheet to "git rebase -i".
* aw/rebase-i-edit-todo:
rebase -i: suggest using --edit-todo to fix an unknown instruction
rebase -i: Add tests for "--edit-todo"
rebase -i: Teach "--edit-todo" action
rebase -i: Refactor help messages for todo file
rebase usage: subcommands can not be combined with -i
"git submodule add" initializes the name of a submodule to its path. This
was ok as long as the .git directory lived inside the submodule's work
tree, but since 1.7.8 it is stored in the .git/modules/<name> directory of
the superproject, making the submodule name survive the removal of the
submodule's work tree. This leads to problems when the user tries to add a
different submodule at the same path - and thus the same name - later, as
that will happily try to restore the submodule from the old repository
instead of the one the user specified and will lead to a checkout of the
wrong repository.
Add the new "--name" option to let the user provide a name for the
submodule. This enables the user to solve this conflict without having to
remove .git/modules/<name> by hand (which is no viable solution as it
makes it impossible to checkout a commit that records the old submodule
and populate it, as that will still check out the new submodule for the
same reason).
To achieve that the submodule's name is added to the parameter list of
the module_clone() helper function. This makes it possible to remove the
call of module_name() there because both callers of module_clone() already
know the name and can provide it as argument number two.
Reported-by: Jonathan Johnson <me@jondavidjohn.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Notes are shown after commit body. From user perspective it looks
pretty much like commit body and they may assume --grep would search
in that part too.
Make it so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to --author/--committer which filters commits by author and
committer header fields. --grep-reflog adds a fake "reflog" header to
commit and a grep filter to search on that line.
All rules to --author/--committer apply except no timestamp stripping.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently using "git rm" on a submodule - populated or not - fails with
this error:
fatal: git rm: '<submodule path>': Is a directory
This made sense in the past as there was no way to remove a submodule
without possibly removing unpushed parts of the submodule's history
contained in its .git directory too, so erroring out here protected the
user from possible loss of data.
But submodules cloned with a recent git version do not contain the .git
directory anymore, they use a gitfile to point to their git directory
which is safely stored inside the superproject's .git directory. The work
tree of these submodules can safely be removed without losing history, so
let's teach git to do so.
Using rm on an unpopulated submodule now removes the empty directory from
the work tree and the gitlink from the index. If the submodule's directory
is missing from the work tree, it will still be removed from the index.
Using rm on a populated submodule using a gitfile will apply the usual
checks for work tree modification adapted to submodules (unless forced).
For a submodule that means that the HEAD is the same as recorded in the
index, no tracked files are modified and no untracked files that aren't
ignored are present in the submodules work tree (ignored files are deemed
expendable and won't stop a submodule's work tree from being removed).
That logic has to be applied in all nested submodules too.
Using rm on a submodule which has its .git directory inside the work trees
top level directory will just error out like it did before to protect the
repository, even when forced. In the future git could either provide a
message informing the user to convert the submodule to use a gitfile or
even attempt to do the conversion itself, but that is not part of this
change.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule" command DWIMs the command line and assumes a
unspecified action word for 'status' action. This is a UI mistake
that leads to a confusing behaviour. A mistyped command name is
instead treated as a request for 'status' of the submodule with that
name, e.g.
$ git submodule show
error: pathspec 'show' did not match any file(s) known to git.
Did you forget to 'git add'?
Stop DWIMming an unknown or mistyped subcommand name as pathspec
given to unspelled "status" subcommand. "git submodule" without any
argument is still interpreted as "git submodule status", but its
value is questionable.
Adjust t7400 to match, and stop advertising the default subcommand
being 'status' which does not help much in practice, other than
promoting laziness and confusion.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "whatchanged --graph -m" on a simple two-head merges
can fall into infinite loop.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various documentation fixups.
* po/maint-docs:
Doc branch: show -vv option and alternative
Doc clean: add See Also link
Doc add: link gitignore
Doc: separate gitignore pattern sources
Doc: shallow clone deepens _to_ new depth
"git fetch --all", when passed "--no-tags", did not honor the
"--no-tags" option while fetching from individual remotes (the same
issue existed with "--tags", but combination "--all --tags" makes
much less sense than "--all --no-tags").
* dj/fetch-all-tags:
fetch --all: pass --tags/--no-tags through to each remote
submodule: use argv_array instead of hand-building arrays
fetch: use argv_array instead of hand-building arrays
argv-array: fix bogus cast when freeing array
argv-array: add pop function
Make it clear to people who (rightly or wrongly) think that the
"--follow" option should follow origin across while-file renames
that we already do so. That would explain the output that they see
when they do give the "--follow" option to the command.
We may or may not want to do a "--no-follow" patch as a follow-up,
but that is a separate topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touch to update documentation of string-list to make sure
the earlier rewrite of ref-list match logic that depends on its sort
order will not get broken.
* mh/fetch-filter-refs:
string_list API: document what "sorted" means
After running "git clone --single", the resulting repository has the
usual default "+refs/heads/*:refs/remotes/origin/*" wildcard fetch
refspec installed, which means that a subsequent "git fetch" will
end up grabbing all the other branches.
Update the fetch refspec to cover only the singly cloned ref instead
to correct this.
That means:
If "--single" is used without "--branch" or "--mirror", the
fetch refspec covers the branch on which remote's HEAD points to.
If "--single" is used with "--branch", it'll cover only the branch
specified in the "--branch" option.
If "--single" is combined with "--mirror", then it'll cover all
refs of the cloned repository.
If "--single" is used with "--branch" that specifies a tag, then
it'll cover only the ref for this tag.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The pretty formats for GPG signatures were introduced but never
documented. Use the documentation from the commit that introduced them.
Do the same for the --show-signature option added to git log and
friends.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Indicate that the -v option can be given twice in the short options.
Without it users pass over the option. Also indicate the alternate
'git remote show' method.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git clean' is controlled by gitignore. Provide See Also link for it.
Use of core.excludesfile is implied.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a gitignore link rather than the gitrepository-
layout link.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use separate bulleted paragraphs for the three different gitignore
pattern sources.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify that 'depth=' specifies the new depth from the remote's
branch tip. It does not add the depth to the existing shallow clone.
(details from pack-protocol.txt).
Clarify that tags are not fetched. (details from shallow.txt)
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a long-standing bug in "git log --grep" when multiple "--grep"
are used together with "--all-match" and "--author" or "--committer".
* jc/maint-log-grep-all-match:
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
Turn many file-scope private symbols to static to reduce the
global namespace contamination.
* jc/make-static:
sequencer.c: mark a private file-scope symbol as static
ident.c: mark private file-scope symbols as static
trace.c: mark a private file-scope symbol as static
wt-status.c: mark a private file-scope symbol as static
read-cache.c: mark a private file-scope symbol as static
strbuf.c: mark a private file-scope symbol as static
sha1-array.c: mark a private file-scope symbol as static
symlinks.c: mark private file-scope symbols as static
notes.c: mark a private file-scope symbol as static
rerere.c: mark private file-scope symbols as static
graph.c: mark private file-scope symbols as static
diff.c: mark a private file-scope symbol as static
commit.c: mark a file-scope private symbol as static
builtin/notes.c: mark file-scope private symbols as static
Add '--conflict' option to git-p4 subcommand to specify what action
to take when conflicts are found during 'p4 submit'.
* pw/p4-submit-conflicts:
git-p4: add submit --conflict option and config varaiable
git p4: add submit --prepare-p4-only option
git p4: add submit --dry-run option
git p4: accept -v for --verbose
git p4: revert deleted files after submit cancel
git p4: rearrange submit template construction
git p4: test clean-up after failed submit, fix added files
git p4: standardize submit cancel due to unchanged template
git p4: move conflict prompt into run, add [q]uit input
git p4: remove submit failure options [a]pply and [w]rite
git p4: gracefully fail if some commits could not be applied
git p4 test: remove bash-ism of combined export/assignment
Avoid confusion in compound sentence about the start of the commit set
and the depth measure. Use two sentences.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The note that explains that changes introduced by removed commits are
preserved should be placed directly after the paragraph that describes
such commits removal. Otherwise the reference to "the commits" appears
out of context.
Also the big example that follows "Consider this history" is about
rewriting part of the history DAG. Move the paragraph that
describes the operation close to it.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent work on using string_list to represent the list of refs
that matched with the refs on the other side during fetch heavily
depends on the sort order by string_list's implementation, and
changing string_list will break it. Document that it uses strcmp()
order, at least for now.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows users to edit the todo file while they're stopped in the
middle of an interactive rebase. When this action is executed, all
comments from the original todo file are stripped, and new help messages
are appended to the end.
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t/perf: add "trash directory" to .gitignore
Add missing -z to git check-attr usage text for consistency with man page
git-jump: ignore (custom) prefix in diff mode
Documentation: indent-with-non-tab uses "equivalent tabs" not 8
completion: add --no-edit to git-commit
Update parts of document that talked about "first line of commit
log" to say "title of commit" with definition of what that "title"
is.
* jw/doc-commit-title:
Documentation: describe subject more precisely
* mh/string-list:
api-string-list.txt: initialize the string_list the easy way
string_list: add a function string_list_longest_prefix()
string_list: add a new function, string_list_remove_duplicates()
string_list: add a new function, filter_string_list()
string_list: add two new functions for splitting strings
string_list: add function string_list_append_nodup()
Update the documentation of the core.whitespace option
"indent-with-non-tab" to correctly reflect that it catches the use of
spaces instead of the equivalent tabs, rather than a fixed number.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add Ada xfuncname and wordRegex patterns to the list of builtin
patterns.
Signed-off-by: Adrian Johnson <ajohnson@redneon.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows specifying what to do when a conflict
happens when applying a commit to p4, automating the
interactive prompt.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option can be used to prepare the client workspace for
submission, only. It does not invoke the final "p4 submit".
A message describes how to proceed, either submitting the
changes or reverting.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option, "git p4 submit --dry-run" can be used to verify
what commits and labels would be moved into p4.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The short form "-v" is common in many git commands as an
alias for "--verbose".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git merge -Xtheirs" did not help content-level merge of binary
files; it should just take their version. Also "*.jpg binary" in
the attributes did not imply they should use the binary ll-merge
driver.
* jc/ll-merge-binary-ours:
ll-merge: warn about inability to merge binary files only when we can't
attr: "binary" attribute should choose built-in "binary" merge driver
merge: teach -Xours/-Xtheirs to binary ll-merge driver
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
* jc/maint-checkout-fileglob-doc:
gitcli: contrast wildcard given to shell and to git
gitcli: formatting fix
Document file-glob for "git checkout -- '*.c'"
Generally speaking, using more options will further narrow the
selection, but there are a few exceptions. Document them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discussion of email subject throughout the documentation is
misleading; it indicates that the first line will always become
the subject. In fact, the subject is generally all lines up until
the first full blank line.
This patch refines that, and makes more use of the concept of a
commit title, with the title being all text up to the first blank line.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updated with help from Peff.
* jc/maint-checkout-fileglob-doc:
gitcli: contrast wildcard given to shell and to git
gitcli: formatting fix
Document file-glob for "git checkout -- '*.c'"
Describe the following in the draft release notes:
. jc/apply-binary-p0
. jc/dotdot-is-parent-directory
. jc/maint-doc-checkout-b-always-takes-branch-name
. jk/maint-http-half-auth-push
. kk/maint-for-each-ref-multi-sort
Yet to be merged before 1.7.12.1 are:
. jk/config-warn-on-inaccessible-paths
. jk/maint-quiet-is-synonym-to-s-in-log
. mz/cherry-pick-cmdline-order
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
The synopsis said "checkout [-B branch]" to make it clear the
branch name is a parameter to the option, but the heading for the
option description was "-B::", not "-B branch::", making the
documentation misleading.
* jc/maint-doc-checkout-b-always-takes-branch-name:
doc: "git checkout -b/-B/--orphan" always takes a branch name
In the demo code blurb, show how to initialize the string_list using
STRING_LIST_INIT_NODUP rather than memset().
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that finds the longest string from a string_list that
is a prefix of a given string.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that deletes duplicate entries from a sorted
string_list.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function allows entries that don't match a specified criterion to
be discarded from a string_list while preserving the order of the
remaining entries.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two new functions, string_list_split() and
string_list_split_in_place(). These split a string into a string_list
on a separator character. The first makes copies of the substrings
(leaving the input string untouched) and the second splits the
original string in place, overwriting the separator characters with
NULs and referring to the original string's memory.
These functions are similar to the strbuf_split_*() functions except
that they work with the more powerful string_list interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function that appends a string to a string_list without
copying it. This can be used to pass ownership of an already-copied
string to a string_list that has strdup_strings set.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use argv-array API in "git fetch" implementation.
* jk/argv-array:
submodule: use argv_array instead of hand-building arrays
fetch: use argv_array instead of hand-building arrays
argv-array: fix bogus cast when freeing array
argv-array: add pop function
Optimise the "merge-base" computation a bit, and also update its
users that do not need the full merge-base information to call a
cheaper subset.
* jc/merge-bases:
reduce_heads(): reimplement on top of remove_redundant()
merge-base: "--is-ancestor A B"
get_merge_bases_many(): walk from many tips in parallel
in_merge_bases(): use paint_down_to_common()
merge_bases_many(): split out the logic to paint history
in_merge_bases(): omit unnecessary redundant common ancestor reduction
http-push: use in_merge_bases() for fast-forward check
receive-pack: use in_merge_bases() for fast-forward check
in_merge_bases(): support only one "other" commit
We will wait for a handful of other fixes that have graduated to the
'master' for 1.8.0 to be tested in the wild and then tag 1.7.12.1:
. mz/cherry-pick-cmdline-order
. jk/maint-quiet-is-synonym-to-s-in-log
. jk/maint-http-half-auth-push
. jc/apply-binary-p0
. jk/config-warn-on-inaccessible-paths
. kk/maint-for-each-ref-multi-sort
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/check-docs-update:
check-docs: get documented command list from Makefile
check-docs: drop git-help special-case
check-docs: list git-gui as a command
check-docs: factor out command-list
command-list: mention git-credential-* helpers
command-list: add git-sh-i18n
check-docs: update non-command documentation list
check-docs: mention gitweb specially
"git branch --set-upstream origin/master" is a common mistake to
create a local branch 'origin/master' and set it to integrate with
the current branch. With a plan to deprecate this option, introduce
"git branch (-u|--set-upstream-to) origin/master" that sets the
current branch to integrate with 'origin/master' remote tracking
branch.
* cn/branch-set-upstream-to:
branch: deprecate --set-upstream and show help if we detect possible mistaken use
branch: add --unset-upstream option
branch: introduce --set-upstream-to
"git cherry-pick A C B" used to replay changes in A and then B and
then C if these three commits had committer timestamps in that
order, which is not what the user who said "A C B" naturally expects.
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
* maint-1.7.11:
Almost 1.7.11.6
gitweb: URL-decode $my_url/$my_uri when stripping PATH_INFO
rebase -i: use full onto sha1 in reflog
sh-setup: protect from exported IFS
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
setup: clarify error messages for file/revisions ambiguity
send-email: improve RFC2047 quote parsing
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
People who are not used to working with shell may intellectually
understand how the command line argument is massaged by the shell
but still have a hard time visualizing the difference between
letting the shell expand fileglobs and having Git see the fileglob
to use as a pathspec.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The paragraph to encourage use of "--" in scripts belongs to the
bullet point that describes the behaviour for a command line without
the explicit "--" disambiguation; it is not a supporting explanation
for the entire bulletted list, and it is wrong to make it a separate
paragraph outside the list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The built-in "binary" attribute macro expands to "-diff -text", so
that textual diff is not produced, and the contents will not go
through any CR/LF conversion ever. During a merge, it should also
choose the "binary" low-level merge driver, but it didn't.
Make it expand to "-diff -merge -text".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The (discouraged) -Xours/-Xtheirs modes of merge are supposed to
give a quick and dirty way to come up with a random mixture of
cleanly merged parts and punted conflict resolution to take contents
from one side in conflicting parts. These options however were only
passed down to the low level merge driver for text.
Teach the built-in binary merge driver to notice them as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "git branch -v" contains "(no branch)" that could be
localized, but the code to align it along with the names of branches
were counting in bytes, not in display columns.
* nd/branch-v-alignment:
branch -v: align even when branch names are in UTF-8
The synopsis said "checkout [-B branch]" to make it clear the branch
name is a parameter to the option, but the heading for the option
description was "-B::", not "-B branch::", making the documentation
misleading. There may be room in documentation pages of other
commands for similar improvements.
* jc/maint-doc-checkout-b-always-takes-branch-name:
doc: "git checkout -b/-B/--orphan" always takes a branch name
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
While looking for a way to expand the URL of a remote
that uses a 'url.<name>.insteadOf' config option I stumbled
over the undocumented '--get-url' option of 'git ls-remote'.
This adds some minimum documentation for that option.
And while at it, also add that option to the '-h' output.
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-list-options.txt is included in git-rev-list.txt. This makes sure
rev-list man page also shows that, and at one place, together with
equivalent options -n and --max-count.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All remote subcommands are spelled out words except 'rm'. 'rm', being a
popular UNIX command name, may mislead users that there are also 'ls' or
'mv'. Use 'remove' to fit with the rest of subcommands.
'rm' is still supported and used in the test suite. It's just not
widely advertised.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
