As a verb, 'setup' is spelled 'set up'. “diff commands such as
diff-files” scans better without a comma. Clarify that shallow
and deep are special non-boolean values for format.thread rather
than boolean values with some other name.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
In commit 56752391 (Make "git gc" pack all refs by default,
2007-05-24), 'git gc' was changed to run pack-refs by default
Versions before v1.5.1.2 cannot clone repos with packed refs over
http, and versions before v1.4.4 cannot handled packed refs at
all, but more recent git should have no problems. Try to make
this more clear in the git-config manual.
The analagous passage in git-gc.txt was updated already with
commit fe2128a (Change git-gc documentation to reflect
gc.packrefs implementation., 2008-01-09).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
Use `code snippet` style instead of 'emphasis' for `git cmd ...`
according to the following rules:
* The SYNOPSIS sections are left untouched.
* If the intent is that the user type the command exactly as given, it
is `code`.
If the user is only loosely referred to a command and/or option, it
remains 'emphasised'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
* maint:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
Documentation: tiny git config manual tweaks
Documentation: git gc packs refs by default now
checkout -m: do not try to fall back to --merge from an unborn branch
git-difftool requires difftool.<tool>.cmd configuration even when
tools use the standard "$diffcmd $from $to" form. This teaches
git-difftool to run these tools in lieu of configuration by
allowing the command to be specified on the command line.
Reference: http://article.gmane.org/gmane.comp.version-control.git/133377
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a verb, 'setup' is spelled 'set up'. “diff commands such as
diff-files” scans better without a comma. Clarify that shallow
and deep are special non-boolean values for format.thread rather
than boolean values with some other name.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 56752391 (Make "git gc" pack all refs by default,
2007-05-24), 'git gc' was changed to run pack-refs by default
Versions before v1.5.1.2 cannot clone repos with packed refs over
http, and versions before v1.4.4 cannot handled packed refs at
all, but more recent git should have no problems. Try to make
this more clear in the git-config manual.
The analagous passage in git-gc.txt was updated already with
commit fe2128a (Change git-gc documentation to reflect
gc.packrefs implementation., 2008-01-09).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do this for both git-merge and git-pull, so as to hopefully alert
(over)users of git-pull to the issue.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
The git-merge manpage was written in terms of merging a "remote",
which is no longer the case: you merge local or remote-tracking
branches; pull is for actual remotes.
Adjust the manpage accordingly. We refer to the arguments as
"commits", and change instances of "remote" to "other" (where branches
are concerned) or "theirs" (where conflict sides are concerned).
Remove the single reference to "pulling".
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
* bg/maint-add-all-doc:
git-rm doc: Describe how to sync index & work tree
git-add/rm doc: Consistently back-quote
Documentation: 'git add -A' can remove files
Newcomers to git that want to remove from the index only the
files that have disappeared from the working tree will probably
look for a way to do that in the documentation for 'git rm'.
Therefore, describe how that can be done (even though it involves
other commands than 'git rm'). Based on a suggestion by Junio,
but re-arranged and rewritten to better fit into the style of
command reference.
While at it, change a single occurrence of "work tree" to "working
tree" for consistency.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach a new option, --autosquash, to the interactive rebase.
When the commit log message begins with "!fixup ...", and there
is a commit whose title begins with the same ..., automatically
modify the todo list of rebase -i so that the commit marked for
squashing come right after the commit to be modified, and change
the action of the moved commit from pick to squash.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Providing multiple targets to force a rebuild is unnecessary
complication.
Avoid using a name that could conflict with future special
targets in GNU make (a leading period followed by uppercase
letters).
The corresponding change to the git-gui Makefile is left for
another patch.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to how git-daemon checks whether a repository is OK to be
exported, smart-http should also check. This check can be satisfied
in two different ways: the environmental variable GIT_HTTP_EXPORT_ALL
may be set to export all repositories, or the individual repository
may have the file git-daemon-export-ok.
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
and while at it also explain why --merge option is disallowed in some
cases.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 9e8ecea (Add 'merge' mode to 'git reset', 2008-12-01) disallowed
"git reset --merge" when there was unmerged entries. But it wished if
unmerged entries were reset as if --hard (instead of --merge) has been
used. This makes sense because all "mergy" operations makes sure that
any path involved in the merge does not have local modifications before
starting, so resetting such a path away won't lose any information.
The previous commit changed the behavior of --merge to accept resetting
unmerged entries if they are reset to a different state than HEAD, but it
did not reset the changes in the work tree, leaving the conflict markers
in the resulting file in the work tree.
Fix it by doing three things:
- Update the documentation to match the wish of original "reset --merge"
better, namely, "An unmerged entry is a sign that the path didn't have
any local modification and can be safely resetted to whatever the new
HEAD records";
- Update read_index_unmerged(), which reads the index file into the cache
while dropping any higher-stage entries down to stage #0, not to copy
the object name from the higher stage entry. The code used to take the
object name from the a stage entry ("base" if you happened to have
stage #1, or "ours" if both sides added, etc.), which essentially meant
that you are getting random results depending on what the merge did.
The _only_ reason we want to keep a previously unmerged entry in the
index at stage #0 is so that we don't forget the fact that we have
corresponding file in the work tree in order to be able to remove it
when the tree we are resetting to does not have the path. In order to
differentiate such an entry from ordinary cache entry, the cache entry
added by read_index_unmerged() is marked as CE_CONFLICTED.
- Update merged_entry() and deleted_entry() so that they pay attention to
cache entries marked as CE_CONFLICTED. They are previously unmerged
entries, and the files in the work tree that correspond to them are
resetted away by oneway_merge() to the version from the tree we are
resetting to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes "reset_index_file()" call "unpack_trees()" directly
instead of forking and execing "git read-tree". So the code is more
efficient.
And it's also easier to see which unpack_tree() options will be used,
as we don't need to follow "git read-tree"'s command line parsing
which is quite complex.
As Daniel Barkalow found, there is a difference between this new
version and the old one. The old version gives an error for
"git reset --merge" with unmerged entries, and the new version does
not when we reset the entries to some states that differ from HEAD.
Instead, it resets the index entry and succeeds, while leaving the
conflict markers in the corresponding file in the work tree (which
will be corrected by the next patch).
The code comes from the sequencer GSoC project:
git://repo.or.cz/git/sbeyer.git
(at commit 5a78908b70ceb5a4ea9fd4b82f07ceba1f019079)
Mentored-by: Daniel Barkalow <barkalow@iabervon.org>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users might prefer to have git-difftool use a different
tool when run from a Git GUI.
This teaches git-difftool to honor 'diff.guitool' when
the '--gui' option is specified. This allows users to
configure their preferred command-line diff tool in
'diff.tool' and a GUI diff tool in 'diff.guitool'.
Reference: http://article.gmane.org/gmane.comp.version-control.git/133386
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
branch: die explicitly why when calling "git branch [-a|-r] branchname".
fast-import: Document author/committer/tagger name is optional
SubmittingPatches: hints to know the status of a submitted patch.
The fast-import parser does not validate that the author, committer
or tagger name component contains both a name and an email address.
Therefore the name component has always been optional. Correct the
documentation to match the implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"What happened to my patch" is pretty much a FAQ on the Git mailing list,
it deserves a few paragraphs in SubmittingPatches...
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
395de250 (Expand ~ and ~user in core.excludesfile, commit.template)
introduced a C function git_config_pathname, doing ~/ and ~user/
expansion. This patch makes the feature available to scripts with 'git
config --get --path'.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Gitosis single-account Git/ssh hosting system runs git commands
through git-shell after confirming that the connecting user is
authorized to access the requested repository. This works well for
upload-pack and receive-pack, which take a repository argument through
git-shell. This doesn't work so well for `cvs server', which is passed
through literally, with no arguments. Allowing arguments risks
sneaking in `--export-all', so that restriction should be maintained.
Despite that, passing a repository root is necessary for per-user
access control by the hosting software, and passing a base path
improves usability without weakening security. Thus, git-cvsserver
needs to come up with these values at runtime by some other
means. Since git-shell preserves the environment for other purposes,
the environment can carry these arguments as well.
Thus, modify git-cvsserver to read $GIT_CVSSERVER_{BASE_PATH,ROOT} in
the absence of equivalent command line arguments.
Signed-off-by: Phil Miller <mille121@illinois.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refspecs without a source side have been reported as confusing by many.
As an alternative, this adds support for commands like:
git push origin --delete somebranch
git push origin --delete tag sometag
Specifically, --delete will prepend a colon to all colon-less refspecs
given on the command line, and will refuse to accept refspecs with
colons to prevent undue confusion.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Documentation: always respect core.worktree if set
This patch adds a DISCUSSION section that contains some tables to
show how the different "git reset" options work depending on the
states of the files in the working tree, the index, HEAD and the
target commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when the feature to use different HTTP authentication methods was
originally written, it needed an extra HTTP request for everything when
the feature was in effect, because we didn't reuse curl sessions.
However, b8ac923 (Add an option for using any HTTP authentication scheme,
not only basic, 2009-11-27) builds on top of an updated codebase that does
reuse curl sessions; there is no need to manually avoid the extra overhead
by making this configurable anymore.
Acked-by: Martin Storsjo <martin@martin.st>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The value of core.worktree in a ".git/config" is honored even when it
differs from the directory that has the ".git" directory as its
subdirectory. This is likely to be a misconfiguration, so warn users
about it. Also, drop the part of the documentation that incorrectly
claimed that we ignore such a misconfigured value.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow the argument convention of git-pack-objects, such that a
separate option (--preogress) is used to force progress reporting
instead of -v/--verbose.
-v/--verbose now does not force progress reporting. Make git-clone.txt
say so.
This should cover all the bases in 21188b1 (Implement git clone -v),
which implemented the option to force progress reporting.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention progress reporting behaviour in the descriptions for -q/
--quiet and -v/--verbose options, in the style of git-pack-objects.txt.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make transport code (viz. transport.c::fetch_refs_via_pack() and
transport-helper.c::standard_options()) that decides to show progress
check if stderr is a terminal, instead of stdout. After all, progress
reports (via the API in progress.[ch]) are sent to stderr.
Update the documentation for git-clone to say "standard error" as well.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/1.7.0-status:
status/commit: do not suggest "reset HEAD <path>" while merging
commit/status: "git add <path>" is not necessarily how to resolve
commit/status: check $GIT_DIR/MERGE_HEAD only once
t7508-status: test all modes with color
t7508-status: status --porcelain ignores relative paths setting
status: reduce duplicated setup code
status: disable color for porcelain format
status -s: obey color.status
builtin-commit: refactor short-status code into wt-status.c
t7508-status.sh: Add tests for status -s
status -s: respect the status.relativePaths option
docs: note that status configuration affects only long format
commit: support alternate status formats
status: add --porcelain output format
status: refactor format option parsing
status: refactor short-mode printing to its own function
status: typo fix in usage
git status: not "commit --dry-run" anymore
git stat -s: short status output
git stat: the beginning of "status that is not a dry-run of commit"
Conflicts:
t/t4034-diff-words.sh
wt-status.c
* maint:
Makefile: FreeBSD (both 7 and 8) needs OLD_ICONV
Start 1.6.6.X maintenance track
Add git-http-backend to command-list.
t4019 "grep" portability fix
t1200: work around a bug in some implementations of "find"
Conflicts:
RelNotes
* sr/vcs-helper:
tests: handle NO_PYTHON setting
builtin-push: don't access freed transport->url
Add Python support library for remote helpers
Basic build infrastructure for Python scripts
Allow helpers to report in "list" command that the ref is unchanged
Fix various memory leaks in transport-helper.c
Allow helper to map private ref names into normal names
Add support for "import" helper command
Allow specifying the remote helper in the url
Add a config option for remotes to specify a foreign vcs
Allow fetch to modify refs
Use a function to determine whether a remote is valid
Allow programs to not depend on remotes having urls
Fix memory leak in helper method for disconnect
Conflicts:
Documentation/git-remote-helpers.txt
Makefile
builtin-ls-remote.c
builtin-push.c
transport-helper.c
* maint:
rebase -i: abort cleanly if the editor fails to launch
technical-docs: document hash API
api-strbuf.txt: fix typos and document launch_editor()
* maint:
Git 1.6.5.7
worktree: don't segfault with an absolute pathspec without a work tree
ignore unknown color configuration
help.autocorrect: do not run a command if the command given is junk
Illustrate "filter" attribute with an example
The example was taken from aa4ed402c9
(Add 'filter' attribute and external filter driver definition).
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hook runs after "git fetch" in the repository the objects are
fetched from as the user who fetched, and has security implications.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for marking capability as mandatory for hosting git version
to understand. This is useful for helpers which require various types
of assistance from main git binary.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command is like "squash", except that it discards the commit message
of the corresponding commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently back-quote commands, options and file names.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation fails to mention that 'git add -A/--all' can
remove files as well as add them, and it also does not say anything about
filepatterns (whether they are allowed, mandatory, or optional). It is
also not clear what the similarities and differences to the -u option are.
Update the intro paragraph (as suggested by Junio, with some minor edits)
to make it clear that 'git add' is able to delete and to also cover the -p
option.
Reword the description of -u to make it clearer (based on Björn
Steinbrink's suggestion).
Simplify the description of -A by saying "Like -u" and then describe the
differences (based on the suggestions by Björn Steinbrink and Junio).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* master: (334 commits)
bash: update 'git commit' completion
Git 1.6.5.5
Fix diff -B/--dirstat miscounting of newly added contents
reset: improve worktree safety valves
Documentation: Avoid use of xmlto --stringparam
archive: clarify description of path parameter
rerere: don't segfault on failure to open rr-cache
Prepare for 1.6.5.5
gitweb: Describe (possible) gitweb.js minification in gitweb/README
Documentation: xmlto 0.0.18 does not know --stringparam
Fix crasher on encountering SHA1-like non-note in notes tree
t9001: use older Getopt::Long boolean prefix '--no' rather than '--no-'
t4201: use ISO8859-1 rather than ISO-8859-1
Git 1.6.5.4
Unconditionally set man.base.url.for.relative.links
Documentation/Makefile: allow man.base.url.for.relative.link to be set from Make
Git 1.6.6-rc1
git-pull.sh: Fix call to git-merge for new command format
Prepare for 1.6.5.4
merge: do not add standard message when message is given with -m option
...
Conflicts:
Documentation/git-remote-helpers.txt
Makefile
builtin-ls-remote.c
builtin-push.c
transport-helper.c
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After specifying 'feature relative-marks' the paths specified with
'feature import-marks' and 'feature export-marks' are relative to an
internal directory in the current repository.
In git-fast-import this means that the paths are relative to the
'.git/info/fast-import' directory. However, other importers may use a
different location.
Add 'feature non-relative-marks' to disable this behavior, this way
it is possible to, for example, specify the import-marks location as
relative, and the export-marks location as non-relative.
Also add tests to verify this behavior.
Cc: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stringparam option is not available on older xmlto versions.
Instead, set man.base.url.for.relative.links via a .xsl file. Older
docbook versions will ignore this without causing grief to users of
older xmlto versions.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --import-marks= option may be specified multiple times on the
commandline and should result in all marks being read in. Only one
import-marks feature may be specified in the stream, which is
overriden by any --import-marks= commandline options.
If one wishes to specify import-marks files in addition to the one
specified in the stream, it is easy to repeat the stream option as a
--import-marks= commandline option.
Also verify this behavior with tests.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows the frontend to specify any of the supported options as
long as no non-option command has been given. This way the
user does not have to include any frontend-specific options, but
instead she can rely on the frontend to tell fast-import what it
needs.
Also factor out parsing of argv and have it execute when we reach the
first non-option command, or after all commands have been read and
no non-option command has been encountered.
Non-git options are ignored, unrecognised options result in an error.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows the fronted to require a specific feature to be supported
by the backend, or abort.
Also add support for four initial feature, date-format=, force=,
import-marks=, export-marks=.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention that path parameters are based on the current working directory.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
--
Documentation/git-archive.txt | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a command line option to override rerere.autoupdate configuration
variable to make it more useful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/maint-hint-failed-merge:
user-manual: Document that "git merge" doesn't like uncommited changes.
merge-recursive: point the user to commit when file would be overwritten.
* mm/config-pathname-tilde-expand:
Documentation: avoid xmlto input error
expand_user_path: expand ~ to $HOME, not to the actual homedir.
Expand ~ and ~user in core.excludesfile, commit.template
This is like --author: allow a user to specify a given date without
using the GIT_AUTHOR_DATE environment variable.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Newer DocBook stylesheets want man.base.url.for.relative.links
parameter set when formatting manpages with external references
to turn them into full URLs, and leave a helpful "you should
set this parameter" message in the output. Earlier we added
the MAN_BASE_URL make variable to specify the value for it.
When MAN_BASE_URL is not given, it ought to be safe to set the
parameter to empty; it would result in an empty leading path for
older stylesheets that ignore the parameter, and newer ones
would produce the same "relative URL" without the message.
Unfortunately, older xmlto (at least version 0.0.18 released in
early 2004 that comes with RHEL/CentOS 5) does not understand
the --stringparam command line option, so we cannot add the
parameter definition unconditionally to the command line. Work
it around by passing the parameter only when set.
If you do not have a suitable URL prefix, you can pass a quoted empty
string to it, like so:
$ make MAN_BASE_URL='""'
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git reset' is missing --quiet, and 'git gc' is not using OPT__QUIET.
Let's fix that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even setting it to empty is better than leaving it unset as it
prevents the warning cruft from appearing in the output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare for 1.6.5.4
merge: do not add standard message when message is given with -m option
Do not misidentify "git merge foo HEAD" as an old-style invocation
Conflicts:
RelNotes
* maint:
help: Do not unnecessarily look for a repository
Documentation: Fix a few i.e./e.g. mix-ups
Documentation: Document --branch option in git clone synopsis
A git bundle can be transported by several means (such as e-mail), not
only by snekaernet, so use e.g. instead of i.e.
The mix-up in git-bundle.txt is obvious.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the --branch option as [-b <name>] in git clones synopsis.
Signed-off-by: David Soria Parra <dsp@php.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes people want their conflicting merges autoresolved by
favouring upstream changes. The standard answer they are given is
to run "git diff --name-only | xargs git checkout MERGE_HEAD --" in
such a case. This is to accept automerge results for the paths that
are fully resolved automatically, while taking their version of the
file in full for paths that have conflicts.
This is problematic on two counts.
One is that this is not exactly what these people want. It discards
all changes they did on their branch for any paths that conflicted.
They usually want to salvage as much automerge result as possible in
a conflicted file, and want to take the upstream change only in the
conflicted part.
This patch teaches two new modes of operation to the lowest-lever
merge machinery, xdl_merge(). Instead of leaving the conflicted
lines from both sides enclosed in <<<, ===, and >>> markers, the
conflicts are resolved favouring our side or their side of changes.
A larger problem is that this tends to encourage a bad workflow by
allowing people to record such a mixed up half-merged result as a
full commit without auditing. This commit does not tackle this
issue at all. In git, we usually give long enough rope to users
with strange wishes as long as the risky features are not enabled by
default, and this is such a risky feature.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by the coloring of quilt.
Introduce a separate color and paint the hunk comment part, i.e. the name
of the function, in a separate color "diff.func" (defaults to plain).
Whitespace between hunk header and hunk comment is printed in plain color.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the option to specify the envelope sender as "auto" which
would pick the 'from' address. This is good because now we can specify
the address only in one place in $HOME/.gitconfig and change it easily.
[jc: added tests]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the configuration option http.authAny (overridable with
the environment variable GIT_HTTP_AUTH_ANY), for instructing curl
to allow any HTTP authentication scheme, not only basic (which
sends the password in plaintext).
When this is enabled, curl has to do double requests most of the time,
in order to discover which HTTP authentication method to use, which
lowers the performance slightly. Therefore this isn't enabled by default.
One example of another authentication scheme to use is digest, which
doesn't send the password in plaintext, but uses a challenge-response
mechanism instead. Using digest authentication in practice requires
at least curl 7.18.1, due to bugs in the digest handling in earlier
versions of curl.
Signed-off-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow curl sessions to be kept alive (ie. not ended with
curl_easy_cleanup()) even after the request is completed, the number of
which is determined by the configuration setting http.minSessions.
Add a count for curl sessions, and update it, across slots, when
starting and ending curl sessions.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, 'status' and 'status -s' in a subdir would produce different
names. This change is all the more important because status.relativePaths
is on by default.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fourth test of show-branch in t1200 test was failing but only
sometimes. It only failed when two commits created in an earlier
test had different timestamps. When they were created within the
same second, the actual output matched the expected output.
Fix this by using test_tick to force reliable timestamps and update
the expected output so it does not to depend on the commits made in
the same sacond.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit ad3f9a7 (Add '--bisect' revision machinery argument) the
'--bisect' option was added to easily pass bisection refs to commands
using the revision machinery.
This patch updates the documentation of the related options to describe
the new behavior.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bg/apply-doc:
Fix over-simplified documentation for 'git log -z'
apply: Use the term "working tree" consistently
apply: Format all options using back-quotes
apply: apply works outside a repository
Clarify and correct -z
* mm/maint-hint-failed-merge:
user-manual: Document that "git merge" doesn't like uncommited changes.
merge-recursive: point the user to commit when file would be overwritten.
* jc/log-stdin:
Add trivial tests for --stdin option to log family
Make --stdin option to "log" family read also pathspecs
setup_revisions(): do not call get_pathspec() too early
Teach --stdin option to "log" family
read_revision_from_stdin(): use strbuf
Conflicts:
revision.c
* cc/replace:
Documentation: talk a little bit about GIT_NO_REPLACE_OBJECTS
Documentation: fix typos and spelling in replace documentation
replace: use a GIT_NO_REPLACE_OBJECTS env variable
* maint:
pack-objects: split implications of --all-progress from progress activation
instaweb: restart server if already running
prune-packed: only show progress when stderr is a tty
Conflicts:
builtin-pack-objects.c
Currently the --all-progress flag is used to use force progress display
during the writing object phase even if output goes to stdout which is
primarily the case during a push operation. This has the unfortunate
side effect of forcing progress display even if stderr is not a
terminal.
Let's introduce the --all-progress-implied argument which has the same
intent except for actually forcing the activation of any progress
display. With this, progress display will be automatically inhibited
whenever stderr is not a terminal, or full progress display will be
included otherwise. This should let people use 'git push' within a cron
job without filling their logs with useless percentage displays.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ignore display mode escape sequences (colour codes) for the purpose of
text wrapping because they don't have a visible width.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 64485b4a, the documentation for 'git log -z' was
simplified too much. The -z option actually changes the behavior
of 'git log' in two ways: commits will be ended with a NUL
instead of a LF (correctly documented) and the --raw and
--numstat will have NUL as field terminators (omitted in
the documentation for 'git log').
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bg/fetch-multi:
Re-implement 'git remote update' using 'git fetch'
builtin-fetch: add --dry-run option
builtin-fetch: add --prune option
teach warn_dangling_symref to take a FILE argument
remote: refactor some logic into get_stale_heads()
Add missing test for 'git remote update --prune'
Add the configuration option skipFetchAll
Teach the --multiple option to 'git fetch'
Teach the --all option to 'git fetch'
Add documentation for core.ignorecase, and mention git-init
in core.filemode and core.symlinks.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A regenerated git-cvsserver database is at risk of having different
CVS revision numbers from an incrementally updated database. Mention
this in the the documentation, and remove an erroneous statement
to the contrary.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/config-pathname-tilde-expand:
Documentation: avoid xmlto input error
expand_user_path: expand ~ to $HOME, not to the actual homedir.
Expand ~ and ~user in core.excludesfile, commit.template
In the Table of Contents, there is a notable inconsistency:
first there is "GIT Glossary", followed by "Git Quick Reference"
on the very next line.
Running "grep -c" on user-manual.txt, I find 780 occurrrences of
"git", 37 occurrences of "Git", and 9 occurrences of "GIT".
In general, "git" is the preferred spelling, except at the
beginning of a sentence.
Therefore, change "GIT Glossary" to "Git Glossary" for consistency
with the rest of the document.
Looking at the other eight occurrences of "GIT" I found one other
occurrence that should be changed:
* The mention of "StGIT". Looking at the web pages for "Stacked Git"
at http://www.procode.org/stgit, I only saw the spelling "StGit",
except in http://wiki.procode.org/cgi-bin/wiki.cgi/StGIT_Tutorial,
but that page was last updated in 2006.
The other seven occurrences should not be changed:
* Three occurrences were in the output of 'git show-branch' run
on the git.git repository.
* One occurrence was in the output of 'git cat-file'.
* One occurrence was as part of the file name "GIT-VERSION-GEN".
* Two occurrences were in comments in scripts quoted in a description
of Tony Luck's workflow.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explain the user why uncommited changes can be problematic with merge,
and point to "commit" and "stash" for the solution. While talking about
commited Vs uncommited changes, we also make it clear that the result of
a merge is normally commited.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-before-pull is well accepted in the DVCS community, but is
confusing some new users. This should get them back in the right way when
the problem occurs.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for 'git apply' uses both the terms
"work tree" and "working tree". Since the glossary uses
the term "working tree", change all occurrences of
"work tree" to "working tree".
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for 'git apply' talks about applying a
patch/diff to the index and to the working tree, which seems
to imply that it will not work outside a git repository.
Actually 'git patch' works outside a repository (which can
be useful especially for applying binary or rename patches that
the standard "patch" utility cannot handle), so the documentation
should mention it.
Thanks to Junio for suggesting better wording.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description for -z is too vague and general for the
apply, diff*, and log commands.
Change the description of -z for 'git log' to note that
commits will be separated by NULs.
Change the description of -z for 'git diff*' and 'git apply'
to note that it applies to the --numstat option, and for
'git diff*' also for --raw option.
Also correct the description of the "munging" of pathanmes that
takes place in the absence of -z for the 'git diff*' and
'git apply' commands, namely that apart from the characters mentioned,
double quotes will also be escaped and that the pathname will be
enclosed in double quotes if any characters are escaped.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not write literal "~/" or "~user" but use "{tilde}/" and "{tilde}user";
otherwise the text between them gets enclosed in
"<subscript>...</subscript>".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jh/notes' (early part):
Add selftests verifying concatenation of multiple notes for the same commit
Refactor notes code to concatenate multiple notes annotating the same object
Add selftests verifying that we can parse notes trees with various fanouts
Teach the notes lookup code to parse notes trees with various fanout schemes
Teach notes code to free its internal data structures on request
Add '%N'-format for pretty-printing commit notes
Add flags to get_commit_notes() to control the format of the note string
t3302-notes-index-expensive: Speed up create_repo()
fast-import: Add support for importing commit notes
Teach "-m <msg>" and "-F <file>" to "git notes edit"
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
.gitignore
Documentation/pretty-formats.txt
pretty.c
* sp/smart-http: (37 commits)
http-backend: Let gcc check the format of more printf-type functions.
http-backend: Fix access beyond end of string.
http-backend: Fix bad treatment of uintmax_t in Content-Length
t5551-http-fetch: Work around broken Accept header in libcurl
t5551-http-fetch: Work around some libcurl versions
http-backend: Protect GIT_PROJECT_ROOT from /../ requests
Git-aware CGI to provide dumb HTTP transport
http-backend: Test configuration options
http-backend: Use http.getanyfile to disable dumb HTTP serving
test smart http fetch and push
http tests: use /dumb/ URL prefix
set httpd port before sourcing lib-httpd
t5540-http-push: remove redundant fetches
Smart HTTP fetch: gzip requests
Smart fetch over HTTP: client side
Smart push over HTTP: client side
Discover refs via smart HTTP server when available
http-backend: more explict LocationMatch
http-backend: add example for gitweb on same URL
http-backend: use mod_alias instead of mod_rewrite
...
Conflicts:
.gitignore
remote-curl.c
* jn/editor-pager:
Provide a build time default-pager setting
Provide a build time default-editor setting
am -i, git-svn: use "git var GIT_PAGER"
add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR"
Teach git var about GIT_PAGER
Teach git var about GIT_EDITOR
Suppress warnings from "git var -l"
Do not use VISUAL editor on dumb terminals
Handle more shell metacharacters in editor names
* bg/format-patch-doc-update:
format-patch: Add "--no-stat" as a synonym for "-p"
format-patch documentation: Fix formatting
format-patch documentation: Remove diff options that are not useful
format-patch: Always generate a patch
* jn/help-everywhere: (23 commits)
diff --no-index: make the usage string less scary
merge-{recursive,subtree}: use usagef() to print usage
Introduce usagef() that takes a printf-style format
Let 'git <command> -h' show usage without a git dir
Show usage string for 'git http-push -h'
Let 'git http-fetch -h' show usage outside any git repository
Show usage string for 'git stripspace -h'
Show usage string for 'git unpack-file -h'
Show usage string for 'git show-index -h'
Show usage string for 'git rev-parse -h'
Show usage string for 'git merge-one-file -h'
Show usage string for 'git mailsplit -h'
Show usage string for 'git imap-send -h'
Show usage string for 'git get-tar-commit-id -h'
Show usage string for 'git fast-import -h'
Show usage string for 'git check-ref-format -h'
http-fetch: add missing initialization of argv0_path
Show usage string for 'git show-ref -h'
Show usage string for 'git merge-ours -h'
Show usage string for 'git commit-tree -h'
...
Conflicts:
imap-send.c
The current man page does a reasonable job at describing branch management
during the development process, but it does not contain any guidance as to
how the branches are affected by releases.
Add a basic introduction to the branch management undertaken during a
git.git release, so that a reader may gain some insight into how the
integration, maintenance, and topic branches are affected during the
release transition, and is thus able to better design the process for their
own project.
Other release activities such as reviews, testing, and creating
distributions are currently out of scope.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the usage string for a subcommand must be printed,
only print the information relevant to that command.
This commit also removes the complete options list from
the first line of the subcommand usage string. Instead,
individual options are documented in the detailed
description following the general usage line.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fix a missing "s" at the end of an occurence of
"--no-replace-objects" and, while at it, it also improves spelling
and rendering.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the command line arguments, after giving zero or more revs, you can
feed a line "--" and then feed pathspecs one at a time.
With this
(
echo ^maint
echo --
echo Documentation
) | git log --stat --oneline --stdin master -- t
lists commits that touch Documentation/ or t/ between maint and master.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the logic to read revs from standard input that rev-list knows about
from it to revision machinery, so that all the users of setup_revisions()
can feed the list of revs from the standard input when "--stdin" is used
on the command line.
Allow some users of the revision machinery that want different semantics
from the "--stdin" option to disable it by setting an option in the
rev_info structure.
This also cleans up the kludge made to bundle.c via cut and paste.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
graph_release() was removed in 064bfbd. Cut it from the API
documentation and a comment.
Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 395de250d (Expand ~ and ~user in core.excludesfile, commit.template),
we introduced the mechanism. But expanding ~ using getpw is not what
people overriding $HOME would usually expect. In particular, git looks
for the user's .gitconfig using $HOME, so it's better to be consistent.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/tutorial-test:
t1200: prepare for merging with Fast-forward bikeshedding
t1200: further modernize test script style
t1200: Make documentation and test agree
t1200: cleanup and modernize test style
These config variables are parsed to substitute ~ and ~user with getpw
entries.
user_path() refactored into new function expand_user_path(), to allow
dynamically allocating the return buffer.
Original patch by Karl Chen, modified by Matthieu Moy, and further
amended by Junio C Hamano.
Signed-off-by: Karl Chen <quarl@quarl.org>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helpers may use a line like "? name unchanged" to specify that there
is nothing new at that name, without any git-specific code to
determine the correct response.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a helper to say that, when it handles "import
refs/heads/topic", the script it outputs will actually write to
refs/svn/origin/branches/topic; therefore, transport-helper should
read it from the latter location after git-fast-import completes.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command, supported if the "import" capability is advertized,
allows a helper to support fetching by outputting a git-fast-import
stream.
If both "fetch" and "import" are advertized, git itself will use
"fetch" (although other users may use "import" in this case).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If this is set, the url is not required, and the transport always uses
a helper named "git-remote-<value>".
It is a separate configuration option in order to allow a sensible
configuration for foreign systems which either have no meaningful urls
for repositories or which require urls that do not specify the system
used by the repository at that location. However, this only affects
how the name of the helper is determined, not anything about the
interaction with the helper, and the contruction is such that, if the
foreign scm does happen to use a co-named url method, a url with that
method may be used directly.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
Document git-svn's first-parent rule
git svn: attempt to create empty dirs on clone+rebase
git svn: add authorsfile test case for ~/.gitconfig
git svn: read global+system config for clone+init
git svn: handle SVN merges from revisions past the tip of the branch
git-svn has the following rule to detect the SVN base for its
operations: find the first git-svn-id line reachable through
first-parent ancestry. IOW,
git log --grep=^git-svn-id: --first-parent -1
Document this, as it is very important when using merges with git-svn.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
The description of the configuration variable is obsolete and
wrong (saying only file content is used), not just incomplete.
It has used the attribute mechanism for a long time.
The documentation of gitattributes mentions the core.autocrlf
configuration variable in its description of crlf attribute.
Refer to the gitattributes documentation from here as well.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a paragraph about the swapped sides in a --merge rebase, which was
otherwise only documented in the sources.
Add a paragraph about the effects of the 'ours' strategy to the -s
description. Also remove the mention of the 'octopus' strategy, which
was copied from the git-merge description but is pointless in a
rebase.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
We parse unhandled.log files for empty_dir statements and make a
best effort attempt to recreate empty directories on fresh
clones and rebase. This should cover the majority of cases
where users work off a single branch or for projects where
branches do not differ in empty directories.
Since this cannot affect "normal" git commands like "checkout"
or "reset", so users switching between branches in a single
working directory should use the new "git svn mkdirs" command
after switching branches.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* ja/fetch-doc:
Documentation/merge-options.txt: order options in alphabetical groups
Documentation/git-pull.txt: Add subtitles above included option files
Documentation/fetch-options.txt: order options alphabetically
* jc/receive-pack-auto:
receive-pack: run "gc --auto --quiet" and optionally "update-server-info"
gc --auto --quiet: make the notice a bit less verboase
Make it clear in the docs that the merge takes the tree of HEAD and
ignores everything in the other branches. This should hopefully clear
up confusion, usually caused by the user looking for a strategy that
resolves all conflict hunks in favour of HEAD (which is completely
different and currently not supported).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extra paragraphs should be prefixed with a plus sign.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new "git var GIT_EDITOR" feature to decide what editor to
use, instead of duplicating its logic elsewhere. This should make
the behavior of commands in edge cases (e.g., editor names with
spaces) a little more consistent.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the command found by setup_pager() for scripts to use.
Scripts can use this to avoid repeating the logic to look for a
proper pager in each command.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the command used by launch_editor() for scripts to use.
This should allow one to avoid searching for a proper editor
separately in each command.
git_editor(void) uses the logic to decide which editor to use
that used to live in launch_editor(). The function returns NULL
if there is no suitable editor; the caller is expected to issue
an error message when appropriate.
launch_editor() uses git_editor() and gives the error message the
same way as before when EDITOR is not set.
"git var GIT_EDITOR" gives the editor name, or an error message
when there is no appropriate one.
"git var -l" gives GIT_EDITOR=name only if there is an
appropriate editor.
Originally-submitted-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current technical documentation for the packfile protocol is both
sparse and incorrect. This documents the fetch-pack/upload-pack and
send-pack/ receive-pack protocols much more fully.
Add documentation from Shawn's upcoming http-protocol docs that is
shared by the packfile protocol. protocol-common.txt describes ABNF
notation amendments, refname rules and the packet line format.
Add documentation on the various capabilities supported by the
upload-pack and receive-pack protocols. protocol-capabilities.txt
describes multi-ack, thin-pack, side-band[-64k], shallow, no-progress,
include-tag, ofs-delta, delete-refs and report-status.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since a0e4639 (filter-branch: fix ref rewriting with
--subdirectory-filter, 2008-08-12) git-filter-branch has done
nearest-ancestor rewriting when using a --subdirectory-filter.
However, that rewriting strategy is also a useful building block in
other tasks. For example, if you want to split out a subset of files
from your history, you would typically call
git filter-branch -- <refs> -- <files>
But this fails for all refs that do not point directly to a commit
that affects <files>, because their referenced commit will not be
rewritten and the ref remains untouched.
The code was already there for the --subdirectory-filter case, so just
introduce an option that enables it independently.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"-p" means "generate patch" in 'git log' and 'git diff', so it's
quite surprising that it means "suppress diffstat" in
'git format-patch'.
Keep the "-p" option for backward compatibility, but add
"--no-stat" as a more intuitive synonym. For backward compatibility
with scripts, we must allow combinations of --stat and --no-stat.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format git commands and options consistently using back quotes
(i.e. a fixed font in the resulting HTML document).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To simplify reading the documentation for format-patch, remove the
description of common diff options that are not useful for the
purpose of the command (i.e. "Prepare patches for e-mail submission").
Specifically, this removes the description of the following options:
--raw
-z
--color
--no-color
--color-words
--diff-filter
-S
--pickaxe-all
--pickaxe-regex
-R
--relative
--exit-code
--quiet
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King recently reinstated -p to suppress the default diffstat
(as -p used to work before 68daa64, about 14 months ago).
However, -p is also needed in combination with certain options
(e.g. --stat or --numstat) in order to produce any patch at all.
The documentation does not mention this.
Since the purpose of format-patch is to produce a patch that
can be emailed, it does not make sense that certain combination
of options will suppress the generation of the patch itself.
Therefore:
* Update 'git format-patch' to always generate a patch.
* Since the --name-only, --name-status, and --check suppresses
the generation of the patch, disallow those options,
and remove the description of them in the documentation.
* Remove the reference to -p in the description of -U.
* Remove the descriptions of the options that are synonyms for -p
plus another option (--patch-with-raw and --patch-with-stat).
* While at it, slightly tweak the description of -p itself
to say that it generates "plain patches", so that you can
think of -p as "plain patch" as an mnemonic aid.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the description next to --assume-unchanged because this option is only
useful in a special case of using that option.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fetch --dry-run as users of "git remote prune" switching to "git fetch
--prune" may expect it. Unfortunately OPT__DRY_RUN() cannot be used as fetch
already uses "-n" for something else.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach fetch to cull stale remote tracking branches after fetching via --prune.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement the configuration skipFetchAll option to allow
certain remotes to be skipped when doing 'git fetch --all' and
'git remote update'. The existing skipDefaultUpdate variable
is still honored (by 'git fetch --all' and 'git remote update').
(If both are set in the configuration file with different values,
the value of the last occurrence will be used.)
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --multiple option to specify that all arguments are either
groups or remotes. The primary reason for adding this option is
to allow us to re-implement 'git remote update' using fetch.
It would have been nice if this option was not needed, but since
the colon in a refspec is optional, it is in general not possible
to know whether a single, colon-less argument is a remote or a
refspec.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git remote' is meant for managing remotes and 'git fetch' is meant
for actually fetching data from remote repositories. Therefore, it is
not logical that you must use 'git remote update' to fetch from
more than one repository at once.
Add the --all option to 'git fetch', to tell it to attempt to fetch
from all remotes. Also, if --all is not given, the <repository>
argument is allowed to be the name of a group, to allow fetching
from all repositories in the group.
Other options except -v and -q are silently ignored.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This only changes the behavior of "git show-ref -h" without any
other options and arguments.
"show-ref -h" currently is short for "show-ref --head", which
shows all the refs/* and HEAD, as opposed to "show-ref" that
shows all the refs/* and not HEAD.
Does anybody use "show-ref -h"? It was in Linus's original, most
likely only because "it might be handy", not because "the command
should not show the HEAD by default for such and such reasons".
So I think it is okay if "show-ref -h" (but not "show-ref
--head") gives help and exits.
If a current script uses "git show-ref -h" without any other
arguments, it would have to be adapted by changing "-h" to
"--head".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds an asciidoc version of the "Fighting regressions with
git bisect" article that the author wrote for the Linux-Kongress
2009 (http://www.linux-kongress.org/2009).
This paper might be interesting to people who want to learn as much as
possible about "git bisect" from a single document.
The slides of the related presentation are available at:
http://www.linux-kongress.org/2009/slides/fighting_regressions_with_git_bisect_christian_couder.pdf
But the Linux Kongress people will not publish this paper online because
they print the papers on their UpTimes magazine
(http://www.lob.de/isbn/978-3-86541-358-1). But they don't take away the
rights of the author (which is very nice), so I have the right to publish
it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were some differences between t1200 and the gitcore-tutorial. Add
missing tests for manually merging two branches, and use the same
commands in both files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some repository owners may wish to enable smart HTTP, but disallow
dumb content serving. Disallowing dumb serving might be because
the owners want to rely upon reachability to control which objects
clients may access from the repository, or they just want to
encourage clients to use the more bandwidth efficient transport.
If http.getanyfile is set to false the backend CGI will return with
'403 Forbidden' when an object file is accessed by a dumb client.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-remote-curl backend detects if the remote server supports
the git-receive-pack service, and if so, runs git-send-pack in a
pipe to dump the command and pack data as a single POST request.
The advertisements from the server that were obtained during the
discovery are passed into git-send-pack before the POST request
starts. This permits git-send-pack to operate largely unmodified.
For smaller packs (those under 1 MiB) a HTTP/1.0 POST with a
Content-Length is used, permitting interaction with any server.
The 1 MiB limit is arbitrary, but is sufficent to fit most deltas
created by human authors against text sources with the occasional
small binary file (e.g. few KiB icon image). The configuration
option http.postBuffer can be used to increase (or shink) this
buffer if the default is not sufficient.
For larger packs which cannot be spooled entirely into the helper's
memory space (due to http.postBuffer being too small), the POST
request requires HTTP/1.1 and sets "Transfer-Encoding: chunked".
This permits the client to upload an unknown amount of data in one
HTTP transaction without needing to pregenerate the entire pack
file locally.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the git-http-backend examples, only match git-receive-pack within
/git/.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the git-http-backend documentation, add an example of how to set up
gitweb and git-http-backend on the same URL by using a series of
mod_alias commands.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the git-http-backend documentation, use mod_alias exlusively, instead
of using a combination of mod_alias and mod_rewrite. This makes the
example slightly shorted and a bit more clear.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify some of the git-http-backend documentation, particularly:
* In the Description, state that smart/dumb HTTP fetch and smart HTTP
push are supported, state that authenticated clients allow push, and
remove the note that this is only suited for read-only updates.
* At the start of Examples, state explicitly what URL is mapping to what
location on disk.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new environment variable, GIT_PROJECT_ROOT, to override the
method of using PATH_TRANSLATED to find the git repository on disk.
This makes it much easier to configure the web server, especially when
the web server's DocumentRoot does not contain the git repositories,
which is the usual case.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Requests for $GIT_URL/git-receive-pack and $GIT_URL/git-upload-pack
are forwarded to the corresponding backend process by directly
executing it and leaving stdin and stdout connected to the invoking
web server. Prior to starting the backend process the HTTP response
headers are sent, thereby freeing the backend from needing to know
about the HTTP protocol.
Requests that are encoded with Content-Encoding: gzip are
automatically inflated before being streamed into the backend.
This is primarily useful for the git-upload-pack backend, which
receives highly repetitive text data from clients that easily
compresses to 50% of its original size.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-http-backend CGI can be configured into any Apache server
using ScriptAlias, such as with the following configuration:
LoadModule cgi_module /usr/libexec/apache2/mod_cgi.so
LoadModule alias_module /usr/libexec/apache2/mod_alias.so
ScriptAlias /git/ /usr/libexec/git-core/git-http-backend/
Repositories are accessed via the translated PATH_INFO.
The CGI is backwards compatible with the dumb client, allowing all
older HTTP clients to continue to download repositories which are
managed by the CGI.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use -c, -C, or --amend, we are trying one of two things: using the
source as a template or modifying a commit with corrections.
When these options are used, the authorship and timestamp recorded in the
newly created commit are always taken from the original commit. This is
inconvenient when we just want to borrow the commit log message or when
our change to the code is so significant that we should take over the
authorship (with the blame for bugs we introduce, of course).
The new --reset-author option is meant to solve this need by regenerating
the timestamp and setting the committer as the new author.
Signed-off-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduced in 492cf3f (More precise description of 'git describe --abbrev', 2009-10-29)
Signed-off-by: Gisle Aas <gisle@aas.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ja/fetch-doc:
Documentation/merge-options.txt: order options in alphabetical groups
Documentation/git-pull.txt: Add subtitles above included option files
Documentation/fetch-options.txt: order options alphabetically
The remote helper interface now supports the push capability,
which can be used to ask the implementation to push one or more
specs to the remote repository. For remote-curl we implement this
by calling the existing WebDAV based git-http-push executable.
Internally the helper interface uses the push_refs transport hook
so that the complexity of the refspec parsing and matching can be
reused between remote implementations. When possible however the
helper protocol uses source ref name rather than the source SHA-1,
thereby allowing the helper to access this name if it is useful.
>From Clemens Buchacher <drizzd@aon.at>:
update http tests according to remote-curl capabilities
o Pushing packed refs is now fixed.
o The transport helper fails if refs are already up-to-date. Add
a test for that.
o The transport helper will notice if refs are already
up-to-date. We therefore need to update server info in the
unpacked-refs test.
o The transport helper will purge deleted branches automatically.
o Use a variable ($ORIG_HEAD) instead of full SHA-1 name.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
CC: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some transports, like the native pack transport implemented by
fetch-pack, support useful features like depth or include tags.
These should be exposed if the underlying helper knows how to
use them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some network protocols (e.g. native git://) are able to fetch more
than one ref at a time and reduce the overall transfer cost by
combining the requests into a single exchange. Instead of feeding
each fetch request one at a time to the helper, feed all of them
at once so the helper can decide whether or not it should batch them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
CC: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For convenience in scripts and aliases, add the option
--ff-only to only allow fast-forwards (and up-to-date,
despite the name).
Disallow combining --ff-only and --no-ff, since they
flatly contradict each other.
Allow all other options to be combined with --ff-only
(i.e. do not add any code to handle them specially),
including the following options:
* --strategy (one or more): As long as the chosen merge
strategy results in up-to-date or fast-forward, the
command will succeed.
* --squash: I cannot imagine why anyone would want to
squash commits only if fast-forward is possible, but I
also see no reason why it should not be allowed.
* --message: The message will always be ignored, but I see
no need to explicitly disallow providing a redundant message.
Acknowledgements: I did look at Yuval Kogman's earlier
patch (107768 in gmane), mainly as shortcut to find my
way in the code, but I did not copy anything directly.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also adds a note about why the output in the examples might give
different output today.
Signed-off-by: Gisle Aas <gisle@aas.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b5227d8 changed the behavior of "ls-files" with
respect to includes, but accidentally broke the "-i" option
The original behavior was:
1. if no "-i" is given, cull all results according to --exclude*
2. if "-i" is given, show the inverse of (1)
The broken behavior was:
1. if no "-i" is given:
a. for "-o", cull results according to --exclude*
b. for index files, always show all
2. if "-i" is given:
a. for "-o", shows the inverse of (1a)
b. for index files, always show all
The fixed behavior keeps the new (1b) behavior introduced
by b5227d8, but fixes the (2b) behavior to show only ignored
files, not all files.
This patch also tweaks the documentation. The original text
was somewhat obscure in the first place, but it is also now
inaccurate (the relationship between (1b) and (2b) is not
quite a "reverse").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add p4merge to the set of built-in diff/merge tools, and update
bash completion and documentation.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the --dirty option, git describe works on HEAD but append s"-dirty"
iff the contents of the work tree differs from HEAD. E.g.
$ git describe --dirty
v1.6.5-15-gc274db7
$ echo >> Makefile
$ git describe --dirty
v1.6.5-15-gc274db7-dirty
The --dirty option can also be used to specify what is appended, instead
of the default string "-dirty".
$ git describe --dirty=.mod
v1.6.5-15-gc274db7.mod
Many build scripts use `git describe` to produce a version number based on
the description of HEAD (on which the work tree is based) + saying that if
the build contains uncommitted changes. This patch helps the writing of
such scripts since `git describe --dirty` does directly the intended thing.
Three possiblities were considered while discussing this new feature:
1. Describe the work tree by default and describe HEAD only if "HEAD" is
explicitly specified
Pro: does the right thing by default (both for users and for scripts)
Pro: other git commands that works on the work tree by default
Con: breaks existing scripts used by the Linux kernel and other projects
2. Use --worktree instead of --dirty
Pro: does what it says: "git describe --worktree" describes the work tree
Con: other commands do not require a --worktree option when working
on the work tree (it often is the default mode for them)
Con: unusable with an optional value: "git describe --worktree=.mod"
is quite unintuitive.
3. Use --dirty as in this patch
Pro: makes sense to specify an optional value (what the dirty mark is)
Pro: does not have any of the big cons of previous alternatives
* does not break scripts
* is not inconsistent with other git commands
This patch takes the third approach.
Signed-off-by: Jean Privat <jean@pryen.org>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/receive-pack-auto:
receive-pack: run "gc --auto --quiet" and optionally "update-server-info"
gc --auto --quiet: make the notice a bit less verboase
The docbook/xmlto toolchain insists on quoting ' as \'. This does
achieve the quoting goal, but modern 'man' implementations turn the
apostrophe into a unicode "proper" apostrophe (given the right
circumstances), breaking code examples in many of our manpages.
Quote them as \(aq instead, which is an "apostrophe quote" as per the
groff_char manpage.
Unfortunately, as Anders Kaseorg kindly pointed out, this is not
portable beyond groff, so we add an extra Makefile variable GNU_ROFF
which you need to enable to get the new quoting.
Thanks also to Miklos Vajna for documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the missing definite article ("the") in several places.
Change "note to..." to "note for...", since "note to" means that
that the note is addressed to someone (source: Google search).
Change "progressbar" to "progress bar" (source: Wikipedia).
Format git commands, options, and file names consistently using
back quotes (i.e. a fixed font in the resulting HTML document).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce two new configuration variables, receive.autogc (defaults to
true) and receive.updateserverinfo (defaults to false). When these are
set, receive-pack runs "gc --auto --quiet" and "update-server-info"
respectively after it finishes receiving data from "git push" and updating
refs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
The "git pull" documentation has examples which follow an outdated
style. Update the examples to use "git merge" where appropriate and
move the examples to the corresponding manpages.
Furthermore,
- show that pull is equivalent to fetch and merge, which is still a
frequently asked question,
- explain the default fetch refspec.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus and other git developers from the early days trained their fingers
to type the command, every once in a while even without thinking, to check
the consistency of the repository back when the lower core part of the git
was still being developed. Developers who wanted to make sure that git
correctly dealt with packfiles could deliberately trigger their creation
and checked them after they were created carefully, but loose objects are
the ones that are written by various commands from random codepaths. It
made some technical sense to have a mode that checked only loose objects
from the debugging point of view for that reason.
Even for git developers, there no longer is any reason to type "git fsck"
every five minutes these days, worried that some newly created objects
might be corrupt due to recent change to git.
The reason we did not make "--full" the default is probably we trust our
filesystems a bit too much. At least, we trusted filesystems more than we
trusted the lower core part of git that was under development.
Once a packfile is created and we always use it read-only, there didn't
seem to be much point in suspecting that the underlying filesystems or
disks may corrupt them in such a way that is not caught by the SHA-1
checksum over the entire packfile and per object checksum. That trust in
the filesystems might have been a good tradeoff between fsck performance
and reliability on platforms git was initially developed on and for, but
it may not be true anymore as we run on many more platforms these days.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you use the option --submodule=log you can see the submodule
summaries inlined in the diff, instead of not-quite-helpful SHA-1 pairs.
The format imitates what "git submodule summary" shows.
To do that, <path>/.git/objects/ is added to the alternate object
databases (if that directory exists).
This option was requested by Jens Lehmann at the GitTogether in Berlin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash list' had an undocumented limit of 10 stashes, unless other
git-log arguments were specified. This surprised at least one user,
but possibly served to cut the output below a screenful without using
a pager.
Since the last commit, 'git stash list' will fire up a pager according
to the same rules as the 'git log' it calls, so we can drop the limit.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add three new --pretty=format escapes:
%gD long reflog descriptor (e.g. refs/stash@{0})
%gd short reflog descriptor (e.g. stash@{0})
%gs reflog message
This is achieved by passing down the reflog info, if any, inside the
pretty_print_context struct.
We use the newly refactored get_reflog_selector(), and give it some
extra functionality to extract a shortened ref. The shortening is
cached inside the commit_reflogs struct; the only allocation of it
happens in read_complete_reflog(), where it is initialised to 0. Also
add another helper get_reflog_message() for the message extraction.
Note that the --format="%h %gD: %gs" tests may not work in real
repositories, as the --pretty formatter doesn't know to leave away the
": " on the last commit in an incomplete (because git-gc removed the
old part) reflog. This equivalence is nevertheless the main goal of
this patch.
Thanks to Jeff King for reviews, the %gd testcase and documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a 'notemodify' subcommand of the 'commit' command. This subcommand
is similar to 'filemodify', except that no mode is supplied (all notes have
mode 0644), and the path is set to the hex SHA1 of the given "comittish".
This enables fast import of note objects along with their associated commits,
since the notes can now be named using the mark references of their
corresponding commits.
The patch also includes a test case of the added functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-m" and "-F" options are already the established method
(in both git-commit and git-tag) to specify a commit/tag message
without invoking the editor. This patch teaches "git notes edit"
to respect the same options for specifying a notes message without
invoking the editor.
Multiple "-m" and/or "-F" options are concatenated as separate
paragraphs.
The patch also updates the "git notes" documentation and adds
selftests for the new functionality. Unfortunately, the added
selftests include a couple of lines with trailing whitespace
(without these the test will fail). This may cause git to warn
about "whitespace errors".
This patch has been improved by the following contributions:
- Thomas Rast: fix trailing whitespace in t3301
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script 'git notes' allows you to edit and show commit notes, by
calling either
git notes show <commit>
or
git notes edit <commit>
This patch has been improved by the following contributions:
- Tor Arne Vestbø: fix printing of multi-line notes
- Michael J Gruber: test and handle empty notes gracefully
- Thomas Rast:
- only clean up message file when editing
- use GIT_EDITOR and core.editor over VISUAL/EDITOR
- t3301: fix confusing quoting in test for valid notes ref
- t3301: use test_must_fail instead of !
- refuse to edit notes outside refs/notes/
- Junio C Hamano: tests: fix "export var=val"
- Christian Couder: documentation: fix 'linkgit' macro in "git-notes.txt"
- Johan Herland: minor cleanup and bugfixing in git-notes.sh (v2)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
This patch has been improved by the following contributions:
- Thomas Rast: fix core.notesRef documentation
- Tor Arne Vestbø: fix printing of multi-line notes
- Alex Riesen: Using char array instead of char pointer costs less BSS
- Johan Herland: Plug leak when msg is good, but msglen or type causes return
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Tor Arne Vestbø <tavestbo@trolltech.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_commit_notes(): Plug memory leak when 'if' triggers, but not because of read_sha1_file() failure
* maint:
git push: say that --tag can't be used with --all or --mirror in help text
git push: remove incomplete options list from help text
document push's new quiet option
Makefile: clean block-sha1/ directory instead of mozilla-sha1/
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
‘git bisect reset’ accepts an optional argument specifying a branch to
check out after cleaning up the bisection state. This lets you
specify an arbitrary commit.
In particular, this provides a way to clean the bisection state
without moving HEAD: ‘git bisect reset HEAD’. This may be useful if
you are not interested in the state before you began a bisect,
especially if checking out the old commit would be expensive and
invalidate most of your compiled tree.
Clarify the ‘git bisect reset’ documentation to explain this optional
argument, which was previously mentioned only in the usage message.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dae556b (environment: add global variable to disable replacement)
adds a variable to enable/disable replacement, and it is enabled by
default for most commands.
So there is no way to disable it for some commands, which is annoying
when we want to get information about a commit that has been replaced.
For example:
$ git cat-file -p N
would output information about the replacement commit if commit N is
replaced.
With the "--no-replace-objects" option that this patch adds it is
possible to get information about the original commit using:
$ git --no-replace-objects cat-file -p N
While at it, let's add some documentation about this new option in the
"git replace" man page too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tolerating empty path components in ref names means each ref does
not have a unique name. This creates difficulty for porcelains
that want to see if two branches are equal. Add a helper associating
to each ref a canonical name.
If a user asks a porcelain to create a ref "refs/heads//master",
the porcelain can run "git check-ref-format --print refs/heads//master"
and only deal with "refs/heads/master" from then on.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless one already knew, it was not obvious what sort of shorthand
"git check-ref-format --branch" expands. Explain it.
The --branch argument is not optional.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When saying the initial branch is equal to the currently active
remote branch, it is probably intended that the branch heads
point to the same commit. Maybe it would be more useful to a
new user to emphasize that the tree contents and history are the
same.
More important, probably, is that this new branch is set up so
that "git pull" merges changes from the corresponding remote
branch. The next paragraph addresses that directly. What the
reader needs to know to begin with is that (1) the initial branch
is your own; if you do not pull, it won't get updated, and that
(2) the initial branch starts out at the same commit as the
upstream.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Idealists may want USE_NSEC to be the default on Linux some day.
Point to a patch to better explain the requirements on
filesystem code for that to happen.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not necessarily obvious to a git novice what it means for a
filesystem tree to be equal to the HEAD. Spell it out.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation seems to assume that the starting point for a new
branch is the tip of an existing (ordinary) branch, but that is not
the most common case. More often, "git branch" is used to begin
a branch from a remote-tracking branch, a tag, or an interesting
commit (e.g. origin/pu^2). Clarify the language so it can apply
to these cases. Thanks to Sean Estabrooks for the wording.
Also add a pointer to the user's manual for the bewildered.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation for --merged and --no-merged to explain
the meaning of the optional parameter introduced in commit 049716b
(branch --merged/--no-merged: allow specifying arbitrary commit,
2008-07-08).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sounds better this way, at least to my ears. ("The syntax and
supported options of git merge" is a plural noun. "the same"
instead of "equal" sounds less technical and seems to convey
the meaning better here.)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fmt-merge-message builtin can be invoked as "git fmt-merge-msg" rather
than through the hard link in GIT_EXEC_PATH. Although this is unlikely to
confuse most script writers, it should not hurt to make the documentation
a little clearer anyway.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easier to edit just the commit message for a commit
using 'git rebase -i' by introducing the "reword" command.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the "pretty" machinery to expand '%+x' to a LF followed by
the expansion of '%x' if and only if '%x' expands to a non-empty string,
and to remove LFs before '%-x' if '%x' expands to an empty string. This
works for any supported expansion placeholder 'x'.
This is expected to be immediately useful to reproduce the commit log
message with "%s%+b%n"; "%s%n%b%n" adds one extra LF if the log message is
a one-liner.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate some english words to portuguese and fix some
typos on translation.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
The default --aggressive window has been 250 since 1c192f34 "gc
--aggressive: make it really aggressive", released in git v1.6.3.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A sample "git describe -h" did not match what the program actually says.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When <path> is not given, use the "humanish" part of the source repository
instead.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jc/maint-1.6.0-blank-at-eof' (early part):
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
A command line
$ git archive -o my-v2.0.zip v2.0
almost certainly wants the output in zip format, even though it does not
specify any --format option.
When --format is not given, but output filename is, try to infer what
format is requested from the filename extension. Currently this code only
knows about '.zip'. When the format is unspecified and the filename does
not tell us, the output will be in 'tar' format as before.
Of course, an explicit --format will not trigger this guesswork.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The '-o' option is commonly used in many tools to specify the output file.
Typing '--output' every time is a bit too long to be a practical alternative
to redirecting output. But specifying the output name has the advantage of
making possible to guess the desired output format by filename extension.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-push is not currently using -n for anything else, and it seems
unlikely we will want to use it to mean anything else in the future,
so add it as an alias for convenience.
Signed-off-by: Nelson Elhage <nelhage@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
60c2993 (Documentation/git-commit.txt: describe --dry-run, 2009-08-15)
wanted to update the documentation to say that "git status" is not the
same as "git commit --dry-run" anymore, but it screwed up and also added
the description of --dry-run that was already present.
Noticed by Johannes Gilger.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/vcs-helper:
Makefile: remove remnant of separate http/https/ftp helpers
Use a clearer style to issue commands to remote helpers
Make the "traditionally-supported" URLs a special case
Makefile: install hardlinks for git-remote-<scheme> supported by libcurl if possible
Makefile: do not link three copies of git-remote-* programs
Makefile: git-http-fetch does not need expat
http-fetch: Fix Makefile dependancies
Add transport native helper executables to .gitignore
git-http-fetch: not a builtin
Use an external program to implement fetching with curl
Add support for external programs for handling native fetches
These messages are nice for new users, but experienced git
users know how to manipulate the index, and these messages
waste a lot of screen real estate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This message is designed to help new users understand what
has happened when refs fail to push. However, it does not
help experienced users at all, and significantly clutters
the output, frequently dwarfing the regular status table and
making it harder to see.
This patch introduces a general configuration mechanism for
optional messages, with this push message as the first
example.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This configuration option allows systematically rewriting fetch-only URLs
to push-capable URLs when used with push. For instance:
[url "ssh://example.org/"]
pushInsteadOf = "git://example.org/"
This will allow clones of "git://example.org/path/to/repo" to subsequently
push to "ssh://example.org/path/to/repo", without manually configuring
pushurl for that remote.
Includes documentation for the new option, bash completion updates, and
test cases (both that pushInsteadOf applies to push, that it does not
apply to fetch, and that it is ignored when pushURL is already defined).
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-pull.txt includes fetch-options.txt and merge-options.txt, both of
which document the --quiet and --verbose.
Supress the ones from fetch-options.txt.
Signed-off-by: Emmanuel Trillaud <etrillaud@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All hooks are currently in its own section. Which may confuse users,
because the section name serves as the hook file name and sections are
all caps for man pages. Putting them into a new HOOKS section and each
hook into a subsection keeps the case to lower case.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mailinfo-scissors:
mailinfo.scissors: new configuration
am/mailinfo: Disable scissors processing by default
Documentation: describe the scissors mark support of "git am"
Teach mailinfo to ignore everything before -- >8 -- mark
builtin-mailinfo.c: fix confusing internal API to mailinfo()
* tr/reset-checkout-patch:
stash: simplify defaulting to "save" and reject unknown options
Make test case number unique
tests: disable interactive hunk selection tests if perl is not available
DWIM 'git stash save -p' for 'git stash -p'
Implement 'git stash save --patch'
Implement 'git checkout --patch'
Implement 'git reset --patch'
builtin-add: refactor the meat of interactive_add()
Add a small patch-mode testing library
git-apply--interactive: Refactor patch mode code
Make 'git stash -k' a short form for 'git stash save --keep-index'
The short format does not respect any of the usual status.*
configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The status command recently grew "short" and "porcelain"
options for alternate output formats. Since status is no
longer "commit --dry-run", these formats are inaccessible to
people who do want to see a dry-run in a parseable form.
This patch makes those formats available to "git commit",
implying the "dry-run" option when they are used.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "short" format was added to "git status" recently to
provide a less verbose way of looking at the same
information. This has two practical uses:
1. Users who want a more dense display of the information.
2. Scripts which want to parse the information and need a
stable, easy-to-parse interface.
For now, the "--short" format covers both of those uses.
However, as time goes on, users of (1) may want additional
format tweaks, or for "git status" to change its behavior
based on configuration variables. Those wishes will be at
odds with (2), which wants to stability for scripts.
This patch introduces a separate --porcelain option early to
avoid problems later on. Right now the --short and
--porcelain outputs are identical. However, as time goes on,
we will have the freedom to customize --short for human
consumption while keeping --porcelain stable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People who configured trailing-space depended on it to catch both extra
white space at the end of line, and extra blank lines at the end of file.
Earlier attempt to introduce only blank-at-eof gave them an escape hatch
to keep the old behaviour, but it is a regression until they explicitly
specify the new error class.
This introduces a blank-at-eol that only catches extra white space at the
end of line, and makes the traditional trailing-space a convenient synonym
to catch both blank-at-eol and blank-at-eof. This way, people who used
trailing-space continue to catch both classes of errors.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply" strips new blank lines at EOF under --whitespace=fix option,
but neigher --whitespace=warn nor --whitespace=error paid any attention to
these errors.
Introduce a new whitespace error class, blank-at-eof, to make the
whitespace error handling more consistent.
The patch adds a new "linenr" field to the struct fragment in order to
record which line the hunk started in the input file, but this is needed
solely for reporting purposes. The detection of this class of whitespace
errors cannot be done while parsing a patch like we do for all the other
classes of whitespace errors. It instead has to wait until we find where
to apply the hunk, but at that point, we do not have an access to the
original line number in the input file anymore, hence the new field.
Depending on your point of view, this may be a bugfix that makes warn and
error in line with fix. Or you could call it a new feature. The line
between them is somewhat fuzzy in this case.
Strictly speaking, triggering more errors than before is a change in
behaviour that is not backward compatible, even though the reason for the
change is because the code was not checking for an error that it should
have. People who do not want added blank lines at EOF to trigger an error
can disable the new error class.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.3:
git-clone: add missing comma in --reference documentation
git-cvsserver: no longer use deprecated 'git-subcommand' commands
clone: disconnect transport after fetching
With the earlier DWIM patches, certain combination of options defaulted
to the "save" command correctly while certain equally valid combination
did not. For example, "git stash -k" were Ok but "git stash -q -k" did
not work.
This makes the logic of defaulting to "save" much simpler. If there are no
non-flag arguments, it is clear that there is no command word, and we
default to "save" subcommand. This rule prevents "git stash -q apply"
from quietly creating a stash with "apply" as the message.
This also teaches "git stash save" to reject an unknown option. This is
to keep a mistyped "git stash save --quite" from creating a stash with a
message "--quite", and this safety is more important with the new logic
to default to "save" with any option-looking argument without an explicit
comand word.
[jc: this is based on Matthieu's 3-patch series, and a follow-up
discussion, and he and Peff take all the credit; if I have introduced bugs
while reworking, they are mine.]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git branch, checkout, clean, mv and tag all have an option -f to override
certain checks. This patch makes them accept the long option --force as
a synonym.
While we're at it, document that checkout support --quiet as synonym for
its short option -q.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A request to clone the repository does not give any "have" but asks for
all the refs we offer with "want". When a request does not ask to clone
the repository fully, but asks to fetch some refs into an empty
repository, it will not give any "have" but its "want" won't ask for all
the refs we offer.
If we suppose (and I would say this is a rather big if) that it makes
sense to distinguish these two cases, a hook cannot reliably do this
alone. The hook can detect lack of "have" and bunch of "want", but there
is no direct way to tell if the other end asked for all refs we offered,
or merely most of them.
Between the time we talked with the other end and the time the hook got
called, we may have acquired more refs or lost some refs in the repository
by concurrent operations. Given that we plan to introduce selective
advertisement of refs with a protocol extension, it would become even more
difficult for hooks to guess between these two cases.
This adds "kind [clone|fetch]" to hook's input, as a stable interface to
allow the hooks to tell these cases apart.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After upload-pack successfully finishes its operation, post-upload-pack
hook can be called for logging purposes.
The hook is passed various pieces of information, one per line, from its
standard input. Currently the following items can be fed to the hook, but
more types of information may be added in the future:
want SHA-1::
40-byte hexadecimal object name the client asked to include in the
resulting pack. Can occur one or more times in the input.
have SHA-1::
40-byte hexadecimal object name the client asked to exclude from
the resulting pack, claiming to have them already. Can occur zero
or more times in the input.
time float::
Number of seconds spent for creating the packfile.
size decimal::
Size of the resulting packfile in bytes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/shortstatus:
git commit --dry-run -v: show diff in color when asked
Documentation/git-commit.txt: describe --dry-run
wt-status: collect untracked files in a separate "collect" phase
Make git_status_config() file scope static to builtin-commit.c
wt-status: move wt_status_colors[] into wt_status structure
wt-status: move many global settings to wt_status structure
commit: --dry-run
status: show worktree status of conflicted paths separately
wt-status.c: rework the way changes to the index and work tree are summarized
diff-index: keep the original index intact
diff-index: report unmerged new entries
* maint:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
* maint-1.6.3:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
* maint-1.6.2:
Fix overridable written with an extra 'e'
Documentation: git-archive: mark --format as optional in summary
Round-down years in "years+months" relative date view
Conflicts:
Documentation/git-archive.txt
The --format option was made optional in 8ff21b1 (git-archive: make
tar the default format, 2007-04-09), but it was not marked as optional
in the summary. This trival patch just changes the summary to match
the rest of the documentation.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/submodule-foreach:
git clone: Add --recursive to automatically checkout (nested) submodules
t7407: Use 'rev-parse --short' rather than bash's substring expansion notation
git submodule status: Add --recursive to recurse into nested submodules
git submodule update: Introduce --recursive to update nested submodules
git submodule foreach: Add --recursive to recurse into nested submodules
git submodule foreach: test access to submodule name as '$name'
Add selftest for 'git submodule foreach'
git submodule: Cleanup usage string and add option parsing to cmd_foreach()
git submodule foreach: Provide access to submodule name, as '$name'
Conflicts:
Documentation/git-submodule.txt
git-submodule.sh
Describe what a scissors mark looks like, and explain in what situation
it is often used.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently point the HEAD of a newly cloned repo to the
same ref as the parent repo's HEAD. While a user can then
"git checkout -b foo origin/foo" whichever branch they
choose, it is more convenient and more efficient to tell
clone which branch you want in the first place.
Based on a patch by Kirill A. Korinskiy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-log: allow --decorate[=short|full]
Minor improvement to the write-tree documentation
git-bisect: call the found commit "*the* first bad commit"
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the <name> placeholder to <tagname> in the SYNOPSIS section of
git-tag documentation, and describe it in the OPTIONS section in a way
similar to how documentation for git-branch does.
Add SEE ALSO section to list the other documentation pages these two pages
refer to.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces core.sparseCheckout, which will control whether
sparse checkout support is enabled in unpack_trees()
It also loads sparse-checkout file that will be used in the next patch.
I split it out so the next patch will be shorter, easier to read.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With skip-worktree bit, you can manually set it to unwanted files,
then remove them: you would have the so-called sparse checkout. The
disadvantages are:
- Porcelain tools are not aware of this. Everytime you do an
operation that may update working directory, skip-worktree may be
cleared out. You have to set them again.
- You still have to remove skip-worktree'd files manually, which is
boring and ineffective.
These will be addressed in the following patches. This patch gives an
idea what is "sparse checkout" in Documentation/git-read-tree.txt.
This file is chosen instead of git-checkout.txt because it is quite
technical and user-unfriendly. I'd expect git-checkout.txt to have
something when Porcelain support is done.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds index as a prerequisite for directory listing (with
exclude). At the moment directory listing is used by "git clean",
"git add", "git ls-files" and "git status"/"git commit" and
unpack_trees()-related commands. These commands have been
checked/modified to populate index before doing directory listing.
add_excludes_from_file() does not enable this feature, because it
is used to read .git/info/exclude and some explicit files specified
by "git ls-files".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detail about this bit is in Documentation/git-update-index.txt.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mongoose (http://code.google.com/p/mongoose/) is a lightweight web
server. It's just a single binary so it's a lot simpler to configure and
install.
Signed-off-by: Wilhansen Li <wil@nohakostudios.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In http://article.gmane.org/gmane.comp.version-control.git/109790 I
threatened to announce a change to the default threading style used by
send-email to no-chain-reply-to (i.e. the second and subsequent messages
will all be replies to the first one), unless nobody objected, in 1.6.3.
Nobody objected, as far as I can dig the list archive. But when nothing
happened in 1.6.3 nor 1.6.4, nobody from the camp who complained loudly
that led to the message did not complain either.
So I am guessing that after all nobody cares about this. But 1.7.0 is a
good time to change this, and as I said in the message, I personally think
it is a good change, so here it is.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes tentative "git stat" and make it take over "git status".
There are some tests that expect "git status" to exit with non-zero status
when there is something staged. Some tests expect "git status path..." to
show the status for a partial commit.
For these, replace "git status" with "git commit --dry-run". For the
ones that do not attempt a dry-run of a partial commit that check the
output from the command, check the output from "git status" as well, as
they should be identical.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
Many projects using submodules expect all submodules to be checked out
in order to build/work correctly. A common command sequence for
developers on such projects is:
git clone url/to/project
cd project
git submodule update --init (--recursive)
This patch introduces the --recursive option to git-clone. The new
option causes git-clone to recursively clone and checkout all
submodules of the cloned project. Hence, the above command sequence
can be reduced to:
git clone --recursive url/to/project
--recursive is ignored if no checkout is done by the git-clone.
The patch also includes documentation and a selftest.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only show
status for all the submodules in the current repo (which is what is
currently done by 'git submodule status'), but also to show status for
all submodules at all levels (i.e. recursing into nested submodules as
well).
This patch teaches the new --recursive option to the 'git submodule status'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only update
the submodules in the current repo (which is what is currently done by
'git submodule update'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule update'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In very large and hierarchically structured projects, one may encounter
nested submodules. In these situations, it is valuable to not only operate
on all the submodules in the current repo (which is what is currently done
by 'git submodule foreach'), but also to operate on all submodules at all
levels (i.e. recursing into nested submodules as well).
This patch teaches the new --recursive option to the 'git submodule foreach'
command. The patch also includes documentation and selftests.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The note about interoperating in different timezones and such is about
localtime argument, not parent.
Signed-off-by: Tuomas Suutari <tuomas.suutari@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
* maint:
filter-branch: make the usage string fit on 80 chars terminals.
filter-branch: add an example how to add ACKs to a range of commits
docs: describe impact of repack on "clone -s"
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The argument to 'git submodule foreach' already has access to the variables
'$path' (the path to the submodule, relative to the superproject) and '$sha1'
(the submodule commit recorded by the superproject).
This patch adds another variable -- '$name' -- which contains the name of the
submodule, as recorded in the superproject's .gitmodules file.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have to add certain lines like ACKs (or for that matter,
Signed-off-by:s) to a range of commits starting with HEAD, you might
be tempted to use 'git rebase -i -10', but that is a waste of your
time.
It is better to use 'git filter-branch' with an appropriate message
filter, and this commit adds an example how to do so to
filter-branch's man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The effects of repacking on a repository with alternates are a bit
subtle. The two main things users will want are:
1. Not to waste disk space by accidentally copying objects which could
be shared.
2. Copying all objects explicitly to break the dependency on the source
repo.
This patch describes both under the "clone -s" documentation. It makes
sense to put it there rather than in git-repack.txt for both cases.
For (1), we are warning the user who is using "clone -s" about what _not_
to do, so we need to get their attention when reading about "clone -s".
For (2), we are telling them how git-repack can be used to accomplish a
task, but until they know that git-repack is the right tool, they have no
reason to look at the repack documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a hunk-based mode to git-stash. You can select hunks from
the difference between HEAD and worktree, and git-stash will build a
stash that reflects these changes. The index state of the stash is
the same as your current index, and we also let --patch imply
--keep-index.
Note that because the selected hunks are rolled back from the worktree
but not the index, the resulting state may appear somewhat confusing
if you had also staged these changes. This is not entirely
satisfactory, but due to the way stashes are applied, other solutions
would require a change to the stash format.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-checkout. In the index usage
git checkout --patch -- [files...]
it lets the user discard edits from the <files> at the granularity of
hunks (by selecting hunks from 'git diff' and then reverse applying
them to the worktree).
We also accept a revision argument. In the case
git checkout --patch HEAD -- [files...]
we offer hunks from the difference between HEAD and the worktree, and
reverse applies them to both index and worktree, allowing you to
discard staged changes completely. In the non-HEAD usage
git checkout --patch <revision> -- [files...]
it offers hunks from the difference between the worktree and
<revision>. The chosen hunks are then applied to both index and
worktree.
The application to worktree and index is done "atomically" in the
sense that we first check if the patch applies to the index (it should
always apply to the worktree). If it does not, we give the user a
choice to either abort or apply to the worktree anyway.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-reset. The basic case is
git reset --patch -- [files...]
which acts as the opposite of 'git add --patch -- [files...]': it
offers hunks for *un*staging. Advanced usage is
git reset --patch <revision> -- [files...]
which offers hunks from the diff between the index and <revision> for
forward application to the index. (That is, the basic case is just
<revision> = HEAD.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule summary is providing similar functionality for submodules as
git diff-index does for a git project (including the meaning of --cached).
But the analogon to git diff-files is missing, so add a --files option to
summarize the differences between the index of the super project and the
last commit checked out in the working tree of the submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
push: point to 'git pull' and 'git push --force' in case of non-fast forward
Documentation: add: <filepattern>... is optional
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
* maint-1.6.3:
Change mentions of "git programs" to "git commands"
Documentation: merge: one <remote> is required
help.c: give correct structure's size to memset()
'git push' failing because of non-fast forward is a very common situation,
and a beginner does not necessarily understand "fast forward" immediately.
Add a new section to the git-push documentation and refer them to it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
<filepattern>... is optional (e.g. when the --all or --update
options are used) so use square brackets in the synopsis.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of the docs and printouts refer to "commands" when discussing what
the end users call via the "git" top-level program. We should refer them
as "git programs" when we discuss the fact that the commands are
implemented as separate programs, but in other contexts, it is better to
use the term "git commands" consistently.
Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge only requires one <remote>, so "<remote>..." should be used in the
synopsis (and not "<remote> <remote>...").
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/run-command-updates:
api-run-command.txt: describe error behavior of run_command functions
run-command.c: squelch a "use before assignment" warning
receive-pack: remove unnecessary run_status report
run_command: report failure to execute the program, but optionally don't
run_command: encode deadly signal number in the return value
run_command: report system call errors instead of returning error codes
run_command: return exit code as positive value
MinGW: simplify waitpid() emulation macros
Add an example to the stash documentation that shows how to quickly
find candidate commits among the 'git fsck --unreachable' output.
Unless you have merges of branch names containing WIP, or edit your
merge messages to say WIP, there will be no false positives.
Snippet written by Björn "doener" Steinbrink and me after zepolen_
asked on IRC.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches --dry-run option to "git commit".
It is the same as "git status", but in the longer term we would want to
change the semantics of "git status" not to be the preview of commit, and
this is the first step for doing so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When this option is given, the command does not verify the pack contents,
but shows the delta chain histogram. If used with --verbose, the usual
list of objects is also shown.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint: (95 commits)
verify-pack -v: do not report "chain length 0"
t5510: harden the way verify-pack is used
gitweb/README: Document $base_url
Documentation: git submodule: add missing options to synopsis
Better usage string for reflog.
hg-to-git: don't import the unused popen2 module
send-email: remove debug trace
config: Keep inner whitespace verbatim
GIT 1.6.4
GIT 1.6.3.4
config.txt: document add.ignore-errors
request-pull: allow ls-remote to notice remote.$nickname.uploadpack
Update the documentation of the raw diff output format
git-rerere.txt: Clarify ambiguity of the config variable
t9143: do not fail if Compress::Zlib is missing
Trivial path quoting fixes in git-instaweb
GIT 1.6.4-rc3
Documentation/config.txt: a variable can be defined on the section header line
git svn: make minimize URL more reliable over http(s)
Disable asciidoc 8.4.1+ semantics for `{plus}` and friends
...
Explain briefly what characters are prohibited in tag <name>
and point to git-check-ref-format(1) manual page for
further information.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If one thinks of a revision as the set of commits which can be reached
from the rev, and of ^rev as the complement, then multiple arguments to
git rev-list can be neither understood as the intersection nor the union
of the individual sets.
But set language is the natural as well as logical language in which to
phrase this. So, add a paragraph which explains multiple arguments using
set language.
Suggested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I have 4GB of RAM on my system which should, in theory, be quite enough
to repack a 600 MB repository. However the unbounded delta cache size
always pushes it into swap, at which point everything virtually comes to
a halt. So unbounded caches are never a good idea.
A default of 256MB should be a good compromize between memory usage and
speed where medium sized repositories are still likely to fit in the
cache with a reasonable memory usage, and larger repositories are going
to take quite some time to repack already anyway.
While at it, clarify the associated config variable documentation
entries a bit.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sb/parse-options:
prune-packed: migrate to parse-options
verify-pack: migrate to parse-options
verify-tag: migrate to parse-options
write-tree: migrate to parse-options
The option --merge was missing for submodule update and --cached for
submodule summary.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce --ignore-whitespace option and corresponding config bool to
ignore whitespace differences while applying patches, akin to the
'patch' program.
'git am', 'git rebase' and the bash git completion are made aware of
this option.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
transport_get() can call transport_native_helper_init() to have list and
fetch-ref operations handled by running a separate program as:
git remote-<something> <remote> [<url>]
This program then accepts, on its stdin, "list" and "fetch <hex>
<name>" commands; the former prints out a list of available refs and
either their hashes or what they are symrefs to, while the latter
fetches them into the local object database and prints a newline when done.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the documentation suggests that 'git merge-base -a' and 'git
show-branch --merge-base' are equivalent (in fact it claims that the
former cannot handle more than two revs).
Alas, the handling of more than two revs is very different. Document
this by tests and correct the documentation to reflect this.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure that usage strings and documentation coincide with each other
and with the actual code.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With extra fixes from Thadeu and Carlos as well.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation states that servers typically listen on port
465 and calls this "ssmtp". While it's true that many mail servers use
port 465 for SSL smtp, this is non-standard, and hails from the days
before smtp and submission TLS support, that arrived in RFC2487 and
RFC3207. Port 465 is actually assigned by IANA for unrelated purposes,
and is mostly still used by mail servers today only to support Outlook
Express.
In any case, this patch helps the documentation better reflect both
standards and reality, while still helpfully mentioning ports numbers
that a user may wish to specify.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current documentation confuses non-standard SSL smtp port 465 with
submission port 587 (RFC 4406). This patch just changes the referenced
number.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git fast-export and git fast-import to rewrite the history
of a repository with large binary files, almost all of the time is
spent dealing with blobs. This is extremely inefficient if all we want
to do is rewrite the commits and tree structure. --no-data skips the
output of blobs and writes SHA-1s instead of marks, which provides a
massive speedup.
Signed-off-by: Geoffrey Irving <irving@naml.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To save me from the carpal tunnel syndrome, make 'git stash' accept
the short option '-k' instead of '--keep-index', and for even more
convenience, let's DWIM when this developer forgot to type the 'save'
command.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, we remove leading [bracketed] [strings] from the Subject:
header when coming up with the summary of the patch. This is because
there are mailing lists etc that add their own headers to the subject, and
they know they can add things in brackets. The most obvious example is the
Linux kernel security list. Their emails look like
Subject: [Security] [patch] random: make get_random_int() more random
and other people mangle Subject: themselves in a similar way, e.g.:
Subject: [PATCH -rc] [BUGFIX] x86: fix kernel_trap_sp()
Subject: [BUGFIX][PATCH] fix bad page removal from LRU (Was Re: [RFC][PATCH] ..
even though "fix" is more than enough cue to mark it as a [BUGFIX].
Some projects however want to keep these bracketed strings. With this
option, we remove only [bracketed strings that contain word PATCH], so we
will turn things like these
[PATCH] [mailinfo] -b ...
[PATCH v2] [mailinfo] -b ...
[PATCH (v2) 1/4] [mailinfo] -b ...
into
[mailinfo] -b ...
This lacks tests and integration to the "git am" toolchain to be useful,
but it is a start.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have an embedded git work tree in your work tree (be it
an orphaned submodule, or an independent checkout of an unrelated
project), "git clean -d -f" blindly descended into it and removed
everything. This is rarely what the user wants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The next major release will be 1.6.5, hopefully with a shorter cycle
than the 1.6.4 cycle. After that in 1.7.0 we can make potentially
backward incompatible changes if necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the description of "--ignore-errors" from git-add.txt as
inspiration.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes mentioning the initial hash output of diff-tree, and
changes the header to "raw output format" which is more descriptive.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the less ambiguous
"set variable foo in order to enable bar"
rather than
"set variable foo to enable bar" which may trick users into
assuming that "enable" is a good value for "foo".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* en/fast-export:
fast-export: Document the fact that git-rev-list arguments are accepted
Add new fast-export testcases
fast-export: Add a --tag-of-filtered-object option for newly dangling tags
fast-export: Do parent rewriting to avoid dropping relevant commits
fast-export: Make sure we show actual ref names instead of "(null)"
fast-export: Omit tags that tag trees
fast-export: Set revs.topo_order before calling setup_revisions
* git://git.bogomips.org/git-svn:
git svn: make minimize URL more reliable over http(s)
git svn: avoid escaping '/' when renaming/copying files
t9142: stop httpd after the test
git svn: the branch command no longer needs the full path
git svn: revert default behavior for --minimize-url
git svn: add gc command
asciidoc 8.4.1 changed the semantics of inline backtick quoting so
that they disable parsing of inline constructs, i.e.,
Input: `{plus}`
Pre 8.4.1: +
Post 8.4.1: {plus}
Fix this by defining the asciidoc attribute 'no-inline-literal'
(which, per the 8.4.1 changelog, is the toggle to return to the old
behaviour) when under ASCIIDOC8.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts the --minimize-url behavior change that
appeared recently in commit 0b2af457a4
("Fix branch detection when repository root is inaccessible").
However, we now allow the option to be turned off by allowing
"--no-minimize-url" so people with limited-access setups can
still take advantage of the fix in
0b2af457a4.
Also document the behavior and default settings of minimize-url
in the manpage for the first time.
This introduces a temporary UI regression to allow t9141 to pass
that will be reverted (fixed) in the next commit.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Add a git svn gc command that gzips all unhandled.log files, and
removes all index files under .git/svn.
Signed-off-by: Robert Allan Zeh <robert.a.zeh@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
When starting a new repository, I see my students often say
% git init newrepo
and curse git. They could say
% mkdir newrepo; cd newrepo; git init
but allowing it as an obvious short-cut may be nicer.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-graft-unhide-true-parents:
git repack: keep commits hidden by a graft
Add a test showing that 'git repack' throws away grafted-away parents
Conflicts:
git-repack.sh
When you have grafts that pretend that a given commit has different
parents than the ones recorded in the commit object, it is dangerous
to let 'git repack' remove those hidden parents, as you can easily
remove the graft and end up with a broken repository.
So let's play it safe and keep those parent objects and everything
that is reachable by them, in addition to the grafted parents.
As this behavior can only be triggered by git pack-objects, and as that
command handles duplicate parents gracefully, we do not bother to cull
duplicated parents that may result by using both true and grafted
parents.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hopefully makes the relationship between threading options of
format-patch and send-email easier to grasp.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also mention deprecated aliases that do not appear in the send-email
manpage.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is useful to grep directories non-recursively, e.g. when one wants to
look for all files in the toplevel directory, but not in any subdirectory,
or in Documentation/, but not in Documentation/technical/.
This patch adds support for --max-depth <depth> option to git-grep. If it is
given, git-grep descends at most <depth> levels of directories below paths
specified on the command line.
Note that if path specified on command line contains wildcards, this option
makes no sense, e.g.
$ git grep -l --max-depth 0 GNU -- 'contrib/*'
(note the quotes) will search all files in contrib/, even in
subdirectories, because '*' matches all files.
Documentation updates, bash-completion and simple test cases are also
provided.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add missing --bare to init-db synopsis.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add long options for dry run and quiet to be more consistent with the
rest of git.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT__VERBOSE introduces the long option (--verbose) in addition to the
already present short option (-v), so document this new addition.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/grep-p:
grep: simplify -p output
grep -p: support user defined regular expressions
grep: add option -p/--show-function
grep: handle pre context lines on demand
grep: print context hunk marks between files
grep: move context hunk mark handling into show_line()
userdiff: add xdiff_clear_find_func()
- correctly link paragraphs within list items
- consistently format examples
- put option alernatives on separate lines
- always use [verse] for config items
- always indent 1st paragraph of a list item, with a tab
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also consistently use single quotes around git commands to make things clear
(was only needed at a couple of places).
Signed-off-by: Yann Dirson <ydirson@altern.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases that invoke shell commands start from the top-level directory,
but this was not documented.
Signed-off-by: Sitaram Chamarty <sitaramc@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/bisect:
Documentation: remove warning saying that "git bisect skip" may slow bisection
bisect: use a PRNG with a bias when skipping away from untestable commits
* sb/quiet-porcelains:
stash: teach quiet option
am, rebase: teach quiet option
submodule, repack: migrate to git-sh-setup's say()
git-sh-setup: introduce say() for quiet options
am: suppress apply errors when using 3-way
t4150: test applying with a newline in subject
Respect the userdiff attributes and config settings when looking for
lines with function definitions in git grep -p.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option -p instructs git grep to print the previous function
definition as a context line, similar to diff -p. Such context lines
are marked with an equal sign instead of a dash. This option
complements the existing context options -A, -B, -C.
Function definitions are detected using the same heuristic that diff
uses. User defined regular expressions are not supported, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
attr: plug minor memory leak
request-pull: really disable pager
Makes some cleanup/review in gittutorial
Makefile: git.o depends on library headers
git-submodule documentation: fix foreach example
There are some different but little cleanup changes to fix some missing
quotes, to fix what seemed to be an unended sentence, to reident a
little paragraph with too large a sentence and fix a branch name that
was referred to twice later by another name.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Backtick and apostrophe are asciidoc markup, so they should be escaped
in order to get the expected result in the rendered manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --porcelain is used git-push will produce machine-readable output. The
output status line for each ref will be tab-separated and sent to stdout instead
of stderr. The full symbolic names of the refs will be given. For example
$ git push --dry-run --porcelain master :foobar 2>/dev/null \
| perl -pe 's/\t/ TAB /g'
= TAB refs/heads/master:refs/heads/master TAB [up to date]
- TAB :refs/heads/foobar TAB [deleted]
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cleanup the documentation to explicitly state that --exclude-directory
is only meaningful when used with -u. Also make the documentation more
consistent with the usage message printed with read-tree --help-all.
The -m, --prefix, --reset options are performing similar actions
(setting some flags, read_cache_unmerged(), checking for illegal option
combinations). Instead of performing these actions when the options are
parsed, we delay performing them until after parse-opts has finished.
The bit fields in struct unpack_trees_options have been promoted to full
unsigned ints. This is necessary to avoid "foo ? 1 : 0" constructs to
set these fields.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When providing a list of paths to limit what is exported, the object that
a tag points to can be filtered out entirely. This new switch allows
the user to specify what should happen to the tag in such a case. The
default action, 'abort' will exit with an error message. With 'drop', the
tag will simply be omitted from the output. With 'rewrite', if the object
tagged was a commit, the tag will be modified to tag an alternate commit.
The alternate commit is determined by treating the original commit as the
"parent" of the tag and then using the parent rewriting algorithm of the
revision traversal machinery (related to the "--parents" option of "git
rev-list")
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a command to unwind the effects of fetch by moving the rev_map
and refs/remotes/git-svn back to an old SVN revision. This allows
revisions to be re-fetched. Ideally SVN revs would be immutable,
but permissions changes in the SVN repository or indiscriminate use
of '--ignore-paths' can create situations where fetch cannot make
progress.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
'git svn dcommit' takes an optional revision argument, but the meaning
of it was rather scary. It completely ignored the current state of
the HEAD, only looking at the revisions between SVN and $rev. If HEAD
was attached to $branch, the branch lost all commits $rev..$branch in
the process.
Considering that 'git svn dcommit HEAD^' has the intuitive meaning
"dcommit all changes on my branch except the last one", we change the
meaning of the revision argument. git-svn temporarily checks out $rev
for its work, meaning that
* if a branch is specified, that branch (_not_ the HEAD) is rebased as
part of the dcommit,
* if some other revision is specified, as in the example, all work
happens on a detached HEAD and no branch is affected.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Also make the docs more consistent with the usage message. While we're
here remove the zero initializers from the static variables as they're
unnecessary.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.2:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
* maint-1.6.1:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
* maint-1.6.0:
git-show-ref.txt: remove word and make consistent
git-svn documentation: fix typo in 'rebase vs. pull/merge' section
use xstrdup, not strdup in ll-merge.c
Under is better than in because of the nested nature of the .git
directory.
"also using" sounds a little odd, plus we say combined with later on so
just use that.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/pushurl:
avoid NULL dereference on failed malloc
builtin-remote: Make "remote -v" display push urls
builtin-remote: Show push urls as well
technical/api-remote: Describe new struct remote member pushurl
t5516: Check pushurl config setting
Allow push and fetch urls to be different
* sb/pull-rebase:
parse-remote: remove unused functions
parse-remote: support default reflist in get_remote_merge_branch
parse-remote: function to get the tracking branch to be merge
Teach stash pop, apply, save, and drop to be quiet when told. By using
the quiet option (-q), these actions will be silent unless errors are
encountered.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am and git-rebase are talkative scripts. Teach them to be quiet when
told, allowing them to speak only when they fail or experience errors.
The quiet option is maintained when git-am or git-rebase fails to apply
a patch. This means subsequent --resolved, --continue, --skip, --abort
invocations will be quiet if the original invocation was quiet.
Drop a handful of >&2 redirection; the rest of the program sends all the
info messages to stdout, not to stderr.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a configuration option, http.sslCertPasswordProtected, and associated
environment variable, GIT_SSL_CERT_PASSWORD_PROTECTED, to enable SSL client
certificate password prompt from within git. If this option is false and
if the environment variable does not exist, git falls back to OpenSSL's
prompts (as in earlier versions of git).
The environment variable may only be used to enable, not to disable
git's password prompt. This behavior mimics GIT_NO_VERIFY; the mere
existence of the variable is all that is checked.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Depending on how your CVS->GIT conversion went you will have some
unexpanded CVS keywords in your GIT repo. If any of your git commits
touch these lines then the patch application will fail. This patch
addresses that by adding an option that will revert and expanded CVS
keywords to files in the working CVS directory that are affected by
the commit being applied.
Signed-off-by: Alex Bennée <alex@bennee.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For another patch series I'm working on I needed some tests
for the cc-cmd feature of git-send-email.
This patch adds 3 tests for the feature and for the possibility
to specify --suppress-cc multiple times, and fixes two bugs.
The first bug is that the --suppress-cc option for `cccmd' was
misspelled as `ccmd' in the code. The second bug, which is
actually found only with my other series, is that the argument
to the cccmd is never quoted, so the cccmd would fail with
patch file names containing a space.
A third bug I fix (in the docs) is that the bodycc argument was
actually spelled ccbody in the documentation and bash completion.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Cc: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/fix-send-email-threaded:
send-email: fix a typo in a comment
send-email: fix threaded mails without chain-reply-to
add a test for git-send-email for threaded mails without chain-reply-to
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
Rewrite the gc section using unresolved and resolved instead of "not
recorded". Add plurals and missing articles. Make some sentences have
consistent tense. Try and be more active by removing "that" and
simplifying sentences.
The terms "hand-resolve" and "hand resolve" were used, so just use "hand
resolve" to be more consistent.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This warning was probably useless anyway, but it is even more so now
that filtering of skipped commits is done in C and that there is a
mechanism to skip away from broken commits.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/maint-fix-send-email-threaded:
doc/send-email: clarify the behavior of --in-reply-to with --no-thread
send-email: fix non-threaded mails
add a test for git-send-email for non-threaded mails
Conflicts:
git-send-email.perl
t/t9001-send-email.sh
Also remove the argument from --[no-]chain-reply-to.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-send-email docs do not mention except in the usage lines
the combined patch formatting/sending ability of git-send-email.
This patch expands on the possible arguments to git-send-email
and explains the meaning of the rev-list argument.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current text makes some users feel uneasy, worrying whether
'-a' could lead to corrupt repositories. Clarify that '-a'
may lead to performance issues only for dumb protocols.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Helped-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a config setting remote.$remotename.pushurl which is
used for pushes only. If absent remote.$remotename.url is used for
pushes and fetches as before.
This is useful, for example, in order to do passwordless fetches
(remote update) over the git transport but pushes over ssh.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash pop' supports the '--index' option since its initial
implementation (bd56ff54, git-stash: add new 'pop' subcommand,
2008-02-22), but its documentation does not mention it explicitly.
Moreover, both the usage shown by 'git stash -h' and the synopsis
section in the man page imply that 'git stash pop' does not have an
'--index' option.
First, this patch corrects the usage and the synopsis section.
Second, the patch moves the description of the '--index' option to the
'git stash pop' section in the documentation, and refers to it from
the 'git stash apply' section. This way it follows the intentions of
commit d1836637 (Documentation: teach stash/pop workflow instead of
stash/apply, 2009-05-28), as all 'git stash pop'-related documentation
will be in one place without references to 'git stash apply'.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add references to the gitworkflows(7) manpage added in f948dd8
(Documentation: add manpage about workflows, 2008-10-19) to both
gittutorial(1) and git(1), so that new users might actually discover
and read it.
Noticed by Randal L. Schwartz.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
blame: correctly handle a path that used to be a directory
add -i: do not dump patch during application
Update draft release notes for 1.6.3.2
grep: fix colouring of matches with zero length
Documentation: teach stash/pop workflow instead of stash/apply
Change xdl_merge to generate output even for null merges
t6023: merge-file fails to output anything for a degenerate merge
'git submodule update --merge' merges the commit referenced by the
superproject into your local branch, instead of checking it out on
a detached HEAD.
As evidenced by the addition of "git submodule update --rebase", it
is useful to provide alternatives to the default 'checkout' behaviour
of "git submodule update". One such alternative is, when updating a
submodule to a new commit, to merge that commit into the current
local branch in that submodule. This is useful in workflows where
you want to update your submodule from its upstream, but you cannot
use --rebase, because you have downstream people working on top of
your submodule branch, and you don't want to disrupt their work.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The addition of "submodule.<name>.rebase" demonstrates the usefulness of
alternatives to the default behaviour of "git submodule update". However,
by naming the config variable "submodule.<name>.rebase", and making it a
boolean choice, we are artificially constraining future git versions that
may want to add _more_ alternatives than just "rebase".
Therefore, while "submodule.<name>.rebase" is not yet in a stable git
release, future-proof it, by changing it from
submodule.<name>.rebase = true/false
to
submodule.<name>.update = rebase/checkout
where "checkout" specifies the default behaviour of "git submodule update"
(checking out the new commit to a detached HEAD), and "rebase" specifies
the --rebase behaviour (where the current local branch in the submodule is
rebase onto the new commit). Thus .update == checkout is equivalent to
.rebase == false, and .update == rebase is equivalent to .rebase == true.
Finally, leaving .update unset is equivalent to leaving .rebase unset.
In future git versions, other alternatives to "git submodule update"
behaviour can be included by adding them to the list of allowable values
for the submodule.<name>.update variable.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copy the description of date-order from rev-list-options.txt, and then
reword it to be commit specific. While we're at it, put <rev> <glob>...
on a new line to not exceed 80 characters.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mktree:
mktree: validate entry type in input
mktree --batch: build more than one tree object
mktree --missing: updated usage message and man page
mktree --missing: allow missing objects
t1010: add mktree test
mktree: do not barf on a submodule commit
builtin-mktree.c: use a helper function to handle one line of input
mktree: use parse-options
build-in git-mktree
* mw/send-email:
send-email: Remove superfluous `my $editor = ...'
send-email: 'References:' should only reference what is sent
send-email: Handle "GIT:" rather than "GIT: " during --compose
Docs: send-email: --smtp-server-port can take symbolic ports
Docs: send-email: Refer to CONFIGURATION section for sendemail.multiedit
Docs: send-email: Put options back into alphabetical order
Use the description of "--ignore-errors" from git-add.txt as
inspiration.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch can be applied to the work tree, the index or both, but the
short description made it look like it's always applied to both.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent discussion on the list showed some comments in favour of a
stash/pop workflow:
http://marc.info/?l=git&m=124234911423358&w=2http://marc.info/?l=git&m=124235348327711&w=2
Change the stash documentation and examples to document pop in its own
right (and apply in terms of pop), and use stash/pop in the examples.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent discussion on the list showed some comments in favour of a
stash/pop workflow:
http://marc.info/?l=git&m=124234911423358&w=2http://marc.info/?l=git&m=124235348327711&w=2
Change the stash documentation and examples to document pop in its own
right (and apply in terms of pop), and use stash/pop in the examples.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cat-file with an object on the command line requires an
option to tell it what to output (type, size, pretty-print,
etc). However, the square brackets in the usage imply that
those options are not required. This patch switches them to
parentheses to indicate "required but grouped-OR" (curly
braces might also work, but this follows the convention used
already by "git stash").
While we're at it, let's change the <sha1> specifier in the
usage to <object>. That's what the documentation uses, and
it does actually use the regular object lookup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the --squash option, merge sets up the index just like for a real
merge, but without the merge info (stages). Say so.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit dbd0f5c (Files given on the command line are relative to $cwd,
2008-08-06) introduced parse_options_fix_filename() as a minimal fix.
OPT_FILENAME is intended to be a more robust fix for the same issue.
OPT_FILENAME and its associated enum OPTION_FILENAME are used to
represent filename options within the parse options API.
This option is similar to OPTION_STRING. If --no is prefixed to the
option the filename is unset. If no argument is given and the default
value is set, the filename is set to the default value. The difference
is that the filename is prefixed with the prefix passed to
parse_options() (or parse_options_start()).
Update git-apply, git-commit, git-fmt-merge-msg, and git-tag to use
OPT_FILENAME with their filename options. Also, rename
parse_options_fix_filename() to fix_filename() as it is no longer
extern.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To give OPT_FILENAME the prefix, we pass the prefix to parse_options()
which passes the prefix to parse_options_start() which sets the prefix
member of parse_opts_ctx accordingly. If there isn't a prefix in the
calling context, passing NULL will suffice.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/mktree:
mktree: validate entry type in input
mktree --batch: build more than one tree object
mktree --missing: updated usage message and man page
mktree --missing: allow missing objects
t1010: add mktree test
mktree: do not barf on a submodule commit
builtin-mktree.c: use a helper function to handle one line of input
mktree: use parse-options
build-in git-mktree
Araxis merge is now a built-in diff/merge tool.
This adds araxis to git-completion and updates
the documentation to mention araxis.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'cc/bisect' (early part):
bisect: make "git bisect" use new "--next-all" bisect-helper function
bisect: add "check_good_are_ancestors_of_bad" function
bisect: implement the "check_merge_bases" function
bisect: automatically sort sha1_array if needed when looking it up
bisect: make skipped array functions more generic
bisect: remove too much function nesting
bisect: use new "struct argv_array" to prepare argv for "setup_revisions"
bisect: store good revisions in a "sha1_array"
bisect: implement "rev_argv_push" to fill an argv with revs
bisect: use "sha1_array" to store skipped revisions
am: simplify "sq" function by using "git rev-parse --sq-quote"
bisect: use "git rev-parse --sq-quote" instead of a custom "sq" function
rev-parse: add --sq-quote to shell quote arguments
rev-list: remove stringed output flag from "show_bisect_vars"
bisect--helper: remove "--next-vars" option as it is now useless
bisect: use "git bisect--helper --next-exit" in "git-bisect.sh"
bisect--helper: add "--next-exit" to output bisect results
bisect: move common bisect functionality to "bisect_common"
rev-list: refactor printing bisect vars
rev-list: make "estimate_bisect_steps" non static
Add a new option, --authors-prog, to git-svn that allows a more flexible
alternative (or supplement) to --authors-file. This allows more
advanced username operations than the authors file will allow. For
example, one may look up Subversion users via LDAP, or may generate the
name and email address from the Subversion username.
Notes:
* If both --authors-name and --authors-prog are given, the former is
tried first, falling back to the later.
* The program is called once per unique SVN username, and the result is
cached.
* The command-line argument must be the path to a program, not a generic
shell command line. The absolute path to this program is taken at
startup since the git-svn script changes directory during operation.
* The option is not enabled for `git svn log'.
[ew: fixed case where neither --authors-(name|prog) were defined]
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
* mh/show-branch-color:
bash completion: show-branch color support
show-branch: color the commit status signs
Conflicts:
contrib/completion/git-completion.bash
* maint:
test: checkout shouldn't say that HEAD has moved if it didn't
completion: enhance "current branch" display
completion: simplify "current branch" in __git_ps1()
completion: fix PS1 display during a merge on detached HEAD
builtin-checkout: Don't tell user that HEAD has moved before it has
pre-commit.sample: don't print incidental SHA1
tests: Add tests for missing format-patch long options
api-parse-options.txt: use 'func' instead of 'funct'
Turn on USE_ST_TIMESPEC for OpenBSD
ls-tree manpage: output of ls-tree is compatible with update-index
ls-tree manpage: use "unless" instead of "when ... is not"
This option works in a similar way to the '--batch' option of 'git cat-file'.
It enables creation of many tree objects with a single process.
The change was motivated by performance considerations in applications that
need to create many tree objects. A non-rigorous test showed tree creation
times improved from (roughly) 200ms to 50ms.
Signed-off-by: Josh Micich <josh.micich@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update usage message in builtin-mktree.c to include '--missing'. Do the
same to man page and clarify that the input does not have to be sorted.
Signed-off-by: Josh Micich <josh.micich@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sender address, as specified with the '--from' command line option,
couldn't be set in the config file. So add a new config option,
'sendemail.from', which sets it. One can use 'sendemail.<identity>.from'
as well of course, which is likely the more useful case.
The sender address would default to GIT_AUTHOR_IDENT, which is usually the
right thing, but this doesn't allow switching based on the identity
selected. It's possible to switch the SMTP server and envelope sender by
using the '--identity' option, in which case one probably wants to use a
different from address as well, but this had to be manually specified.
The documentation for 'from' is also corrected somewhat. If '--from' is
specified (or the new sendemail.from option is used) then the user isn't
prompted. The default with no '--from' option (or sendemail.from option)
is GIT_AUTHOR_IDENT first then GIT_COMMITTER_IDENT, not just
GIT_COMMITTER_IDENT.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git check-ref-format' checks for the presence of at least one '/', the
idea being that there should be no refs directly below 'refs/', so there
should be a category like 'heads/' or 'tags/' in a refname.
Try and make this clearer in the man page.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Such format relationships are very useful things to remember for
script writers.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Delayed negation in a statement is harder to spot and keep in mind.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation: cloning to empty directory is allowed
Clarify kind of conflict in merge-one-file helper
git config: clarify --add and --get-color
archive-tar.c: squelch a type mismatch warning
This adds --reference option to git submodule add and
git submodule update commands, which is passed to git clone.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is asking for trouble since '\' is a directory separator in
Windows and thus may produce unpredictable results.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cloning into an existing empty directory is now allowed:
commit 55892d2398
("Allow cloning to an existing empty directory")
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a way to recognize numerical options. The number is passed to
a callback function as a string.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add OPTION_NEGBIT and OPT_NEGBIT, mirroring OPTION_BIT and OPT_BIT.
OPT_NEGBIT can be used together with OPT_BIT to define two options
that cancel each other out.
Note: this patch removes the reminder from the test script because
it adds a test for --no-or4 and there already was one for --or4.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fredrik Skolmli and Thomas Rast noticed that it was left unstated that
"git clean" ran from a subdirectory will not affect anything outside it,
with or without path limiters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
improve error message in config.c
t4018-diff-funcname: add cpp xfuncname pattern to syntax test
Work around BSD whose typeof(tv.tv_sec) != time_t
git-am.txt: reword extra headers in message body
git-am.txt: Use date or value instead of time or timestamp
git-am.txt: add an 'a', say what 'it' is, simplify a sentence
dir.c: Fix two minor grammatical errors in comments
git-svn: fix a sloppy Getopt::Long usage
It's nice to know that 'it' is git-am or the subject line. Whitespace
implies characters so just remove characters.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Unreliable hardlinks" is a misleading description for what is happening.
So rename it to something less misleading.
Suggested by Linus Torvalds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For all uses of $(ASCIIDOC) in Documentation/Makefile, supply the same
options via $(ASCIIDOC_EXTRA).
Signed-off-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
* maint-1.6.1:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
* maint-1.6.0:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
The SubmittingPatches file was trimmed down from a somewhat
overwhelming set of requirements from the Linux Kernel equivalent;
however perhaps a little of it can be returned without making the
text too long.
Signed-off-by: Sam Vilain <sam@vilain.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that accessing NTFS partitions with ufsd (at least on my EeePC)
has an unnerving bug: if you link() a file and unlink() it right away,
the target of the link() will have the correct size, but consist of NULs.
It seems as if the calls are simply not serialized correctly, as single-stepping
through the function move_temp_to_file() works flawlessly.
As ufsd is "Commertial software" (sic!), I cannot fix it, and have to work
around it in Git.
At the same time, it seems that this fixes msysGit issues 222 and 229 to
assume that Windows cannot handle link() && unlink().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text is a little bit awkward. This rewrites the description
section to be more readable and friendly.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were a few minor grammatical errors that made this paragraph hard
to read. This patch fixes the errors in a very minimal manner.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git submodule update --rebase' rebases your local branch on top of what
would have been checked out to a detached HEAD otherwise.
In some cases, detaching the HEAD when updating a submodule complicates
the workflow to commit to this submodule (checkout master, rebase, then
commit). For submodules that require frequent updates but infrequent
(if any) commits, a rebase can be executed directly by the git-submodule
command, ensuring that the submodules stay on their respective branches.
git-config key: submodule.$name.rebase (bool)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By renaming 'information' to 'configuration' we capture more clearly
what a configuration file holds.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify --no-binary description using some words from the original
commit 37c22a4b (add --no-binary, 2008-05-9). Cleanup --suffix
description. Add --thread style option to synopsis and reorganize it a
bit. Clarify renaming patches example and the configuration paragraph.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a missing quote and properly escape the ' character so docs don't
look odd. Add 'the' to make some sentences more gramatically correct.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when a sentence is started with 'shallow' or 'deep' use the
lowercase version to maintain consistency.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
elm stores a text file version of the aliases that is
<alias> = <comment> = <email address>
This adds the parsing of this file to git-send-email
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way the sentence is currently written, there needs to be an "its",
but this leads to: "however the remote wildcard may be anywhere as long
as it's its own" which is awkward to read.
Instead, this patch fixes he grammar in a simpler way.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this fix, the output looks like:
"Keep in mind that the (asterisk) wildcard of the local ref (right of
the :) *must be the ..." -- with half the sentence spuriously bold.
This fixes the problem by simply escaping asciidoc syntax as suggested
by Jeff King <peff@peff.net>.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it possible to color the status character ('*' '!' '+' '-') of each
commit corresponding to the branch it's in. This makes it easier to
follow a particular branch, especially if there are larger gaps in the
output.
Add the config option color.showbranch and the command line options
--color and --no-color to control the colored output.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/maint-add-p-quit:
Update git-add.txt according to the new possibilities of 'git add -p'.
add-interactive: refactor mode hunk handling
git add -p: new "quit" command at the prompt.
The text is merely cut-and-pasted from git-add--interactive.perl. The
cut-and-paste also fixes a typo.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's already 'd' to stop staging hunks in a file, but no explicit
command to stop the interactive staging (for the current files and the
remaining ones). Of course you can do 'd' and then ^C, but it would be
more intuitive to allow 'quit' action.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/archive-attribute:
archive test: attributes
archive: do not read .gitattributes in working directory
unpack-trees: do not muck with attributes when we are not checking out
attr: add GIT_ATTR_INDEX "direction"
archive tests: do not use .gitattributes in working directory
* maint:
Describe fixes since 1.6.2.3
doc/git-daemon: add missing arguments to max-connections option
doc/git-daemon: add missing arguments to options
init: Do not segfault on big GIT_TEMPLATE_DIR environment variable
imap-send: use correct configuration variable in documentation
This documentation update is needed to reflect the recent changes where
"core.sharedRepository = 0mode" was changed to set, not loosen, the
repository permissions.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/cobdoc:
docs/checkout: clarify what "non-branch" means
doc/checkout: split checkout and branch creation in synopsis
doc/checkout: refer to git-branch(1) as appropriate
doc: refer to tracking configuration as "upstream"
doc: clarify --no-track option
* mm/add-p-quit:
Update git-add.txt according to the new possibilities of 'git add -p'.
add-interactive: refactor mode hunk handling
git add -p: new "quit" command at the prompt.
* da/difftool:
mergetool--lib: simplify API usage by removing more global variables
Fix misspelled mergetool.keepBackup
difftool/mergetool: refactor commands to use git-mergetool--lib
mergetool: use $( ... ) instead of `backticks`
bash completion: add git-difftool
difftool: add support for a difftool.prompt config variable
difftool: add various git-difftool tests
difftool: move 'git-difftool' out of contrib
difftool/mergetool: add diffuse as merge and diff tool
difftool: add a -y shortcut for --no-prompt
difftool: use perl built-ins when testing for msys
difftool: remove the backup file feature
difftool: remove merge options for opendiff, tkdiff, kdiff3 and xxdiff
git-mergetool: add new merge tool TortoiseMerge
git-mergetool/difftool: make (g)vimdiff workable under Windows
doc/merge-config: list ecmerge as a built-in merge tool
The gitattributes documentation has a section on the "diff"
attribute, with subsections for each of the things you might
want to configure in your diff config section (external
diff, hunk headers, etc). The first such subsection
specifically notes that the definition of the diff driver
should go into $GIT_DIR/config, but subsequent sections do
not.
This location is implied if you are reading the
documentation sequentially, but it is not uncommon for a new
user to jump to (or be referred to) a specific section. For
a new user who does not know git well enough to recognize
the config syntax, it is not clear that those directives
don't also go into the gitattributes file.
This patch just mentions the config file in each subsection,
similar to the way it is mentioned in the first.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old behaviour still remains with --worktree-attributes, and it is
always on for the legacy "git tar-tree".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text is merely cut-and-pasted from git-add--interactive.perl. The
cut-and-paste also fixes a typo.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's already 'd' to stop staging hunks in a file, but no explicit
command to stop the interactive staging (for the current files and the
remaining ones). Of course you can do 'd' and then ^C, but it would be
more intuitive to allow 'quit' action.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace description of sendemail.multiedit in --annotate docs
with a reference to the CONFIGURATION section.
Add such a reference to the --compose documentation.
Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This applies the shorten_unambiguous_ref function to the object name.
Default mode is controlled by core.warnAmbiguousRefs. Else it is given as
optional argument to --abbrev-ref={strict|loose}.
This should be faster than 'git for-each-ref --format="%(refname:short)" <ref>'
for single refs.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
core.warnAmbiguousRefs is used to select strict mode for the
abbreviation for the ":short" format specifier of "refname" and "upstream".
In strict mode, the abbreviated ref will never trigger the
'warn_ambiguous_refs' warning. I.e. for these refs:
refs/heads/xyzzy
refs/tags/xyzzy
the abbreviated forms are:
heads/xyzzy
tags/xyzzy
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the code we literally stick "refs/heads/" on the front
and see if it resolves, so that is probably the best
explanation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These can really be thought of as two different modes, since
the "<branch>" parameter is treated differently in the two
(in one it is the branch to be checked out, but in the other
it is really a start-point for branch creation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of description for the branch creation options is
simply cut and paste from git-branch. There are two reasons
to fix this:
1. It can grow stale with respect to what's in "git
branch" (which it is now is).
2. It is not just an implementation detail, but rather the
desired mental model for the command that we are using
"git branch" here. Being explicit about that can help
the user understand what is going on.
It also makes sense to strip the branch creation options
from the synopsis, as they are making it a long,
hard-to-read line. They are still easily discovered by
reading the options list, and --track is explicitly
referenced when branch creation is described.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The term "tracking" often creates confusion between remote
tracking branches and local branches which track a remote
branch. The term "upstream" captures more clearly the idea
of "branch A is based on branch B in some way", so it makes
sense to mention it.
At the same time, upstream branches are used for more
than just git-pull these days; let's mention that here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not really about ignoring the config option; it is
about turning off tracking, _even if_ the config option is
set.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These links inside "stalenotes" section need to be updated on the master
branch every time a new stable or maintenance release is made.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/show-upstream:
branch: show upstream branch when double verbose
make get_short_ref a public function
for-each-ref: add "upstream" format field
for-each-ref: refactor refname handling
for-each-ref: refactor get_short_ref function
* fg/remote-prune:
add tests for remote groups
git remote update: Fallback to remote if group does not exist
remote: New function remote_is_configured()
git remote update: Report error for non-existing groups
git remote update: New option --prune
builtin-remote.c: Split out prune_remote as a separate function.
* maint:
GIT 1.6.2.3
State the effect of filter-branch on graft explicitly
process_{tree,blob}: Remove useless xstrdup calls
Conflicts:
GIT-VERSION-GEN
The mergetool--lib scriplet was tricky to use because it relied upon
the existance of several global shell variables. This removes more
global variables so that things are simpler for callers.
A side effect is that some variables are recomputed each time
run_merge_tool() is called, but the overhead for recomputing
them is justified by the simpler implementation.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git add -e [<files>]", Git will fire up an editor with the current
diff relative to the index (i.e. what you would get with "git diff
[<files>]").
Now you can edit the patch as much as you like, including adding/removing
lines, editing the text, whatever. Make sure, though, that the first
character of the hunk lines is still a space, a plus or a minus.
After you closed the editor, Git will adjust the line counts of the hunks
if necessary, thanks to the --recount option of apply, and commit the
patch. Except if you deleted everything, in which case nothing happens
(for obvious reasons).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ensure that the Makefile that generates and installs the Documentation is
aware of any SHELL_PATH setting. Use this value if found or the current
setting for SHELL if not. This is an accommodation for systems where sh
is not POSIX enough.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --ignored-paths argument is now stored as
"svn-remote.$REMOTE_NAME.ignore-paths" in the config file.
[ew: edited subject and message]
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The --ignore-paths option to fetch is very useful for working on a subset
of a SVN repository. For proper operation, every command that causes a
fetch (explicit or implied) must include a matching --ignore-paths option.
This patch adds a persistent svn-remote.$repo_id.ignore-paths config by
promoting Fetcher::is_path_ignored to a member function and initializing
$self->{ignore_regex} in Fetcher::new. Command line --ignore-paths is
still recognized and acts in addition to the config value.
Signed-off-by: Ben Jackson <ben@ben.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
This allows for example gitosis to allow use of 'git archive --remote' in a
controlled environment.
Signed-off-by: Erik Broes <erikbroes@ripe.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This consolidates the common functionality from git-mergetool and
git-difftool--helper into a single git-mergetool--lib scriptlet.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This information is easily accessible when we are
calculating the relationship. The only reason not to print
it all the time is that it consumes a fair bit of screen
space, and may not be of interest to the user.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for determining the upstream ref of a branch is
somewhat complex to perform in a shell script. This patch
provides a plumbing mechanism for scripts to access the C
logic used internally by git-status, git-branch, etc.
For example:
$ git for-each-ref \
--format='%(refname:short) %(upstream:short)' \
refs/heads/
master origin/master
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Change double quotes to single quotes in message
Documentation: clarify .gitattributes search
git-checkout.txt: clarify that <branch> applies when no path is given.
git-checkout.txt: fix incorrect statement about HEAD and index
Conflicts:
Documentation/git-checkout.txt
* maint-1.6.1:
Documentation: clarify .gitattributes search
git-checkout.txt: clarify that <branch> applies when no path is given.
git-checkout.txt: fix incorrect statement about HEAD and index
* maint-1.6.0:
Documentation: clarify .gitattributes search
git-checkout.txt: clarify that <branch> applies when no path is given.
git-checkout.txt: fix incorrect statement about HEAD and index
difftool now supports difftool.prompt so that users do not have to
pass --no-prompt or hit enter each time a diff tool is launched.
The --prompt flag overrides the configuration variable.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This prepares 'git-difftool' and its documentation for
mainstream use.
'git-difftool-helper' became 'git-difftool--helper'
since users should not use it directly.
'git-difftool' was added to the list of commands as
an ancillaryinterrogator.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds diffuse as a built-in merge tool.
Signed-off-by: Sebastian Pipping <sebastian@pipping.org>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
TortoiseMerge comes with TortoiseSVN or TortoiseGit for Windows. It can
only be used as a merge tool with an existing base file. It cannot be
used without a base nor as a diff tool.
The documentation only mentions the slash '/' as command line option
prefix, which refused to work, but the parser also accepts the dash '-'
See http://code.google.com/p/msysgit/issues/detail?id=226
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other pages use --option=<argument>, not --option='argument', do the
same here.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the term "toplevel of the work tree" in gitattributes.txt and
gitignore.txt to define the limits of the search for those files.
Signed-off-by: Jason Merrill <jason@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, the sentence "Defaults to HEAD." can be mis-read to mean
that "git checkout -- hello.c" checks-out from HEAD.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command "git checkout" checks out from the index by default, not
HEAD (the introducing comment were correct, but the detailled
explanation added below were not).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, git remote update <remote> would fail unless there was
a remote group configured with the same name as the remote.
git remote update will now fall back to using the remote if no matching
group can be found.
This enables "git remote update -p <remote>..." to fetch and prune one
or more remotes, for example.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/name-branch:
Don't permit ref/branch names to end with ".lock"
check_ref_format(): tighten refname rules
strbuf_check_branch_ref(): a helper to check a refname for a branch
Fix branch -m @{-1} newname
check-ref-format --branch: give Porcelain a way to grok branch shorthand
strbuf_branchname(): a wrapper for branch name shorthands
Rename interpret/substitute nth_last_branch functions
Conflicts:
Documentation/git-check-ref-format.txt
* sb/format-patch-patchname:
format_sanitized_subject: Don't trim past initial length of strbuf
log-tree: fix patch filename computation in "git format-patch"
format-patch: --numbered-files and --stdout aren't mutually exclusive
format-patch: --attach/inline uses filename instead of SHA1
format-patch: move get_patch_filename() into log-tree
format-patch: pass a commit to reopen_stdout()
format-patch: construct patch filename in one function
pretty.c: add %f format specifier to format_commit_message()
A handful of random personal preference:
- Force sans-serif for the text.
- Quote code sample literal inside a single-quote pair.
- Show emphasis in blue-green italics.
- Do not use itarlics for term definition, but show them in navy.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you regularly create patches which require a Signed-off: line you may
want to make it your default to add that line. It also helps you not to forget
to add the -s/--signoff switch.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the --prune (or -p) option, git remote update will also prune
all the remotes that it fetches. Previously, you had to do a manual
git remote prune <remote> for each of the remotes you wanted to
prune, and this could be tedious with many remotes.
A single command will now update a set of remotes, and remove all
stale branches: git remote update -p [group]
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used in GUIs to open installed HTML documentation in the
browser.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dm/maint-docco:
Documentation: Remove spurious uses of "you" in git-bisect.txt.
Documentation: minor grammatical fix in git-check-ref-format.txt
Documentation: minor grammatical fixes in git-check-attr.txt
Documentation: minor grammatical fixes in git-cat-file.txt
Documentation: minor grammatical fixes and rewording in git-bundle.txt
Documentation: remove some uses of the passive voice in git-bisect.txt
Documentation: reword example text in git-bisect.txt.
Documentation: reworded the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-branch.txt.
Documentation: minor grammatical fixes in git-blame.txt.
Documentation: reword the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-archive.txt.
* cj/doc-format:
Documentation: use "spurious .sp" XSLT if DOCBOOK_SUPPRESS_SP is set
Documentation: option to render literal text as bold for manpages
Documentation: asciidoc.conf: fix verse block with block titles
Documentation: asciidoc.conf: always use <literallayout> for [blocktext]
Documentation: move "spurious .sp" code into manpage-base.xsl
Documentation: move quieting params into manpage-base.xsl
Documentation: rename docbook-xsl-172 attribute to git-asciidoc-no-roff
Documentation: use parametrized manpage-base.xsl with manpage-{1.72,normal}.xsl
Documentation: move callouts.xsl to manpage-{base,normal}.xsl
Documentation/Makefile: break up texi pipeline
Documentation/Makefile: make most operations "quiet"
Fix the git-svn documentation svn-remote example section talking about
tags and branches by using the proper key "fetch" instead of "trunk".
Using "trunk" actually might be nice, but it doesn't currently work.
The fetch line for the trunk was also reordered to be at the top of the
list, since most people think about the trunk/tags/branches trio in that
logical order.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this change, the "spurious .sp" suppression XSLT code is
disabled by default. It can be enabled by defining
DOCBOOK_SUPPRESS_SP.
The "spurious .sp" XSLT fragment was used to work around a bug
first released in docbook-xsl 1.69.1. Modern versions of
docbook-xsl are negatively affected by the code (some empty lines
are omitted from manpage output; see
<http://article.gmane.org/gmane.comp.version-control.git/115302>).
The key revisions in the docbook SVN repo seem to be 5144 (before
docbook-xsl 1.69.1) and 6359 (before docbook-xsl 1.71.1).
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
People may expect/prefer -q to still show git commits,
so this change allows a second -q to hide them.
Signed-off-by: Michael Poole <mdpoole@troilus.org>
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Acked-by: Eric Wong <normalperson@yhbt.net>
* maint:
Update draft release notes to 1.6.2.2
Fix bash completion in path with spaces
bash completion: only show 'log --merge' if merging
git-tag(1): add hint about commit messages
Documentation: update graph api example.
* maint-1.6.1:
Fix bash completion in path with spaces
bash completion: only show 'log --merge' if merging
git-tag(1): add hint about commit messages
Documentation: update graph api example.
Conflicts:
contrib/completion/git-completion.bash
* maint-1.6.0:
Fix bash completion in path with spaces
bash completion: only show 'log --merge' if merging
git-tag(1): add hint about commit messages
Documentation: update graph api example.
push.default is not only for the current remote but setting the default
behaviour for all remotes.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for branch.*.merge is very dense, so add a simple
explanation on top of it.
And branch.*.remote also affects 'git push'.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a tag is not annotated, git tag displays the commit message
instead. Add this hint to the manpage to unhide this secret.
Signed-off-by: Nico Schottelius <nico@ikn.schottelius.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of commit 03300c0 the graph API uses '*' for all nodes including merges.
This updates the example in the documentation to match.
Signed-off-by: Allan Caffee <allan.caffee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch supports the format.headers configuration for adding
arbitrary email headers to the patches it outputs. This patch adds
support for an --add-header argument which makes the same feature
available from the command line. This is useful when the content of
custom email headers must change from branch to branch.
This patch has been sponsored by Grant Street Group
Signed-off-by: Michael Hendricks <michael@ndrix.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users were confused about the meaning and use of the --root option.
Notably, since 68c2ec7 (format-patch: show patch text for the root
commit, 2009-01-10), --root has nothing to do with showing the patch
text for the root commit any more.
Shorten and clarify the corresponding paragraph in the DESCRIPTION
section, document --root under OPTIONS, and add an explicit note that
root commits are formatted regardless.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows manpages viewed on a tty to render inline literal
text in a manner that is distinct from the surrounding text.
The initial implementation (pre-mailing-list) of this patch
included a conditional variant of the XSLT code in
manpage-base.xsl and use xmlto's --stringparam option to
optionally enable the functionality. It turns out that
--stringparam is broken in all versions of xmlto except for the
pre-release, SVN version. Since xmlto is a shell script the patch
to fix it is simple enough, but I instead opted to use xmlto's
"module" functionality.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No files use the variant of block-title with verse-block, but
such a case would have generated broken docbook XML (<simpara> is
not allowed inside <para>). This fixes the potential deviation from
valid docbook XML.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the docbook-xsl-no-raw-roff variant match the
no-docbook-xsl-no-raw-roff variant in terms of which XML tag is
used to wrap listing block text (delimited with lines of dashes).
e920b56 (Tweak asciidoc output to work with broken docbook-xsl,
2006-03-05) says docbook-xsl 1.68 needs <literallayout>. This
<screen> usages was in the old, 1.72-only section. But since it
is now the "roff-less" section, it probably makes sense to make it
symmetric with the "roff-ful" section.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "spurious .sp" code should be independent of docbook-xsl
versions.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move a couple of XSL parameters that act to silence
informational/warning messages generated when running xmlto from
manpage-1.72.xsl to manpage-base.xsl.
Since unused parameters are silently ignored, there is no problem
if some version of docbook-xsl does not know about these
parameters. The only problem might be if a version of docbook-xsl
uses the parameters for alternate functionality. Since both
parameters have fairly specific names such a situation is
unlikely.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that the ability to use raw roff codes in asciidoc.conf
was eliminated by docbook-xsl 1.72.0 _and later_. Unlike the
1.72.0-specific XSLT problem, this behavior was not reverted in
later releases.
This patch aims to make it clear that the affected asciidoc
attribute (flag) can be reasonably used with docbook-xsl versions
other than 1.72.0.
Also, document which make variables should be set for various
versions of asciidoc and docbook-xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parametrize the backslash and dot characters that are used to
generate roff control sequences in manpage-base.xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of manpage-base.xsl and manpage-normal.xsl gets a copy of
the contents of callouts.xsl and the original is removed. The
Makefile is adjusted to refer to manpage-normal.xsl instead of
callouts.xsl. manpage-base.xsl will be later made into a common
base for -normal and -1.72.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most shells define the exit value of a pipeline as the exit value
of the last process. For each texi rule, run the DOCBOOK2X_TEXI
tool and the "fixup" script in their own non-pipeline commands so
that make will notice an error exit code.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adapts the "quiet make" implementation from the main
Makefile.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fg/push-default:
builtin-push.c: Fix typo: "anythig" -> "anything"
Display warning for default git push with no push.default config
New config push.default to decide default behavior for push
Conflicts:
Documentation/config.txt
* dm/maint-docco:
Documentation: Remove spurious uses of "you" in git-bisect.txt.
Documentation: minor grammatical fix in git-check-ref-format.txt
Documentation: minor grammatical fixes in git-check-attr.txt
Documentation: minor grammatical fixes in git-cat-file.txt
Documentation: minor grammatical fixes and rewording in git-bundle.txt
Documentation: remove some uses of the passive voice in git-bisect.txt
the "--use-separate-remote" option no longer exists, having since
become the default for a clone.
Signed-off-by: Carlo Marcelo Arenas Belon <carenas@sajinet.com.pe>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were added by accident in a42dea3.
This patch also rewords the description of how ranges of commits can be
skipped.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The described issues are compiled from the tests by Michael Haggerty and me.
Because it is not apparent that these can be fixed anytime soon at least warn
unwary users not to rely on the inbuilt cvsimport to much.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already skip over loose refs under $GIT_DIR/refs if the name
ends with ".lock", so creating a branch named "foo.lock" will not
appear in the output of "git branch", "git for-each-ref", nor will
its commit be considered reachable by "git rev-list --all".
In the latter case this is especially evil, as it may cause
repository corruption when objects reachable only through such a
ref are deleted by "git prune".
It should be reasonably safe to deny use of ".lock" as a ref suffix.
In prior versions of Git such branches would be "phantom branches";
you can create it, but you can't see it in "git branch" output.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the rules for refnames to forbid:
(1) a refname that contains "@{" in it.
Some people and foreign SCM converter may have named their branches
as frotz@24 and we still want to keep supporting it.
However, "git branch frotz@{24}" is a disaster. It cannot even
checked out because "git checkout frotz@{24}" will interpret it as
"detach the HEAD at twenty-fourth reflog entry of the frotz branch".
(2) a refname that ends with a dot.
We already reject a path component that begins with a dot, primarily
to avoid ambiguous range interpretation. If we allowed ".B" as a
valid ref, it is unclear if "A...B" means "in dot-B but not in A" or
"either in A or B but not in both".
But for this to be complete, we need also to forbid "A." to avoid "in
B but not in A-dot". This was not a problem in the original range
notation, but we should have added this restriction when three-dot
notation was introduced.
Unlike "no dot at the beginning of any path component" rule, this
rule does not have to be "no dot at the end of any path component",
because you cannot abbreviate the tail end away, similar to you can
say "dot-B" to mean "refs/heads/dot-B".
For these reasons, it is not likely people created branches with these
names on purpose, but we have allowed such names to be used for quite some
time, and it is possible that people created such branches by mistake or
by accident.
To help people with branches with such unfortunate names to recover,
we still allow "branch -d 'bad.'" to delete such branches, and also allow
"branch -m bad. good" to rename them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command may not be the best place to add this new feature, but
$ git check-ref-format --branch "@{-1}"
allows Porcelains to figure out what branch you were on before the last
branch switching.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This specifier represents the sanitized and filename friendly subject
line of a commit. No checks are made against the length of the string,
so users may need to trim the result to the desired length if using as a
filename. This is commonly used by format-patch to massage commit
subjects into filenames and output patches to files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit also converts all reference specifications to a monospaced font,
as the embedded ~ character used in some of the references sometimes causes
the text up to the next ~ to be displayed incorrectly as a subscript when the
HTML pages are generated. This was tested with asciidoc 8.2.5.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation of the post-checkout hook just talks
about git-checkout. But recently git-clone was changed to
call it too, unless the -no-checkout (-n) option is used.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'Everyday GIT' guide was using the old dashed form
of git-init.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dm/maint-docco:
Documentation: reword example text in git-bisect.txt.
Documentation: reworded the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-branch.txt.
Documentation: minor grammatical fixes in git-blame.txt.
Documentation: reword the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-archive.txt.
For example:
git format-patch --numbered-files --stdout --attach HEAD~~
will create two messages with files 1 and 2 attached respectively.
Without --attach/--inline but with --stdout, --numbered-files option
can be simply ignored, because we are not creating any file ourselves.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/parseopt-config:
config: test for --replace-all with one argument and fix documentation.
config: set help text for --bool-or-int
git config: don't allow --get-color* and variable type
git config: don't allow extra arguments for -e or -l.
git config: don't allow multiple variable types
git config: don't allow multiple config file locations
git config: reorganize to use parseopt
git config: reorganize get_color*
git config: trivial rename in preparation for parseopt
git_config(): not having a per-repo config file is not an error
Avoid splitting sentences across examples of command usage.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text was very vague about what exactly it means
for difference to "contain" a change. This seems to cause
confusion on the mailing list every month or two.
To fix it we:
1. use "introduce or remove an instance of" instead of
"contain"
2. point the user to gitdiffcore(7), which contains a more
complete explanation
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the options --committer-date-is-author-date and --ignore-date
to git-rebase. They were introduced in commit a79ec62d0 for git-am.
These options imply --force-rebase.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/color-grep:
grep: prefer builtin over external one when coloring results
grep: cast printf %.*s "precision" argument explicitly to int
grep: add support for coloring with external greps
grep: color patterns in output
grep: add pmatch and eflags arguments to match_one_pattern()
grep: remove grep_opt argument from match_expr_eval()
grep: micro-optimize hit collection for AND nodes
* js/remote-improvements: (23 commits)
builtin-remote.c: no "commented out" code, please
builtin-remote: new show output style for push refspecs
builtin-remote: new show output style
remote: make guess_remote_head() use exact HEAD lookup if it is available
builtin-remote: add set-head subcommand
builtin-remote: teach show to display remote HEAD
builtin-remote: fix two inconsistencies in the output of "show <remote>"
builtin-remote: make get_remote_ref_states() always populate states.tracked
builtin-remote: rename variables and eliminate redundant function call
builtin-remote: remove unused code in get_ref_states
builtin-remote: refactor duplicated cleanup code
string-list: new for_each_string_list() function
remote: make match_refs() not short-circuit
remote: make match_refs() copy src ref before assigning to peer_ref
remote: let guess_remote_head() optionally return all matches
remote: make copy_ref() perform a deep copy
remote: simplify guess_remote_head()
move locate_head() to remote.c
move duplicated ref_newer() to remote.c
move duplicated get_local_heads() to remote.c
...
Conflicts:
builtin-clone.c
* kb/checkout-optim:
Revert "lstat_cache(): print a warning if doing ping-pong between cache types"
checkout bugfix: use stat.mtime instead of stat.ctime in two places
Makefile: Set compiler switch for USE_NSEC
Create USE_ST_TIMESPEC and turn it on for Darwin
Not all systems use st_[cm]tim field for ns resolution file timestamp
Record ns-timestamps if possible, but do not use it without USE_NSEC
write_index(): update index_state->timestamp after flushing to disk
verify_uptodate(): add ce_uptodate(ce) test
make USE_NSEC work as expected
fix compile error when USE_NSEC is defined
check_updates(): effective removal of cache entries marked CE_REMOVE
lstat_cache(): print a warning if doing ping-pong between cache types
show_patch_diff(): remove a call to fstat()
write_entry(): use fstat() instead of lstat() when file is open
write_entry(): cleanup of some duplicated code
create_directories(): remove some memcpy() and strchr() calls
unlink_entry(): introduce schedule_dir_for_removal()
lstat_cache(): swap func(length, string) into func(string, length)
lstat_cache(): generalise longest_match_lstat_cache()
lstat_cache(): small cleanup and optimisation
'git branch -f a b' resets a to b when a exists, rather then deleting a.
Say so in the documentation.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a git push without any refspecs is attempted, display a warning.
The current default behavior is to push all matching refspecs, which
may come as a surprise to new users, so the warning shows how
push.default can be configured and what the possible values are.
Traditionalists who wish to keep the current behaviour are also told
how to configure this once and never see the warning again.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git push" is not told what refspecs to push, it pushes all matching
branches to the current remote. For some workflows this default is not
useful, and surprises new users. Some have even found that this default
behaviour is too easy to trigger by accident with unwanted consequences.
Introduce a new configuration variable "push.default" that decides what
action git push should take if no refspecs are given or implied by the
command line arguments or the current remote configuration.
Possible values are:
'nothing' : Push nothing;
'matching' : Current default behaviour, push all branches that already
exist in the current remote;
'tracking' : Push the current branch to whatever it is tracking;
'current' : Push the current branch to a branch of the same name,
i.e. HEAD.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If literal text (asciidoc `...`) can be rendered in a differently from
normal text for each output format (man, HTML), then we do not need
extra quotes or other wrapping around inline literal text segments.
config.txt
Change '`...`' to `...`. In asciidoc, the single quotes provide
emphasis, literal text should be distintive enough.
Change "`...`" to `...`. These double quotes do not work if present
in the described config value, so drop them.
git-checkout.txt
Change "`...`" to `...` or `"..."`. All instances are command line
argument examples. One "`-`" becomes `-`. Two others are involve
curly braces, so move the double quotes inside the literal region to
indicate that they might need to be quoted on the command line of
certain shells (tcsh).
git-merge.txt
Change "`...`" to `...`. All instances are used to describe merge
conflict markers. The quotes should are not important.
git-rev-parse.txt
Change "`...`" to `...`. All instances are around command line
arguments where no in-shell quoting should be necessary.
gitcli.txt
Change `"..."` to `...`. All instances are around command line
examples or single command arguments. They do not semanticly belong
inside the literal text, and they are not needed outside it.
glossary-content.txt
user-manual.txt
Change "`...`" to `...`. All instances were around command lines.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword this section to make it less chatty. Also make minor grammatical
fixes.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Option --replace-all only allows at least two arguments, so
documentation was needing to be updated accordingly. A test showing
that the command fails with only one parameter is also provided.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rearrange the example usage of
git filter-branch --index-filter 'git rm --cached ...'
so that --ignore-unmatch is in the main example block. People keep
stumbling over the (lack of this) option to the point where it is a
FAQ, so we would want to expose the most common usage where it stands
out.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
