Add the option -W/--function-context to git diff. It is similar to
the same option of git grep and expands the context of change hunks
so that the whole surrounding function is shown. This "natural"
context can allow changes to be understood better.
Note: GNU patch doesn't like diffs generated with the new option;
it seems to expect context lines to be the same before and after
changes. git apply doesn't complain.
This implementation has the same shortcoming as the one in grep,
namely that there is no way to explicitly find the end of a
function. That means that a few lines of extra context are shown,
right up to the next recognized function begins. It's already
useful in its current form, though.
The function get_func_line() in xdiff/xemit.c is extended to work
forward as well as backward to find post-context as well as
pre-context. It returns the position of the first found matching
line. The func_line parameter is made optional, as we don't need
it for -W.
The enhanced function is then used in xdl_emit_diff() to extend
the context as needed. If the added context overlaps with the
next change, it is merged into the current hunk.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, 582aa00 (git diff too slow for a file, 2010-05-02)
unconditionally dropped XDF_NEED_MINIMAL option from the internal xdiff
invocation to help performance on pathological cases, while hinting that a
follow-up patch could reintroduce it with "--minimal" option from the
command line.
Make it so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff -p" piped to external diffstat and "git diff --stat" may see
different patch text (both are valid and describe the same change
correctly) when counting the number of added and deleted lines, arriving
at different results to confuse the users, as --stat/--numstat codepath
always uses the hardcoded -U0 as the context length.
Make --stat/--numstat codepath to honor the context length the same way
as the textual patch codepath does to avoid this problem.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
The diff config callback is split into two functions: one
which loads "ui" config, and one which loads "basic" config.
The former chains to the latter, as the diff UI config is a
superset of the plumbing config.
The color.diff variable is only loaded in the UI config.
However, the basic config actually chains to
git_color_default_config, which loads color.ui. This doesn't
actually cause any bugs, because the plumbing diff code does
not actually look at the value of color.ui.
However, it is somewhat nonsensical, and it makes it
difficult to refactor the color code. It probably came about
because there is no git_color_config to load only color
config, but rather just git_color_default_config, which
loads color config and chains to git_default_config.
This patch splits out the color-specific portion of
git_color_default_config so that the diff UI config can call
it directly. This is perhaps better explained by the
chaining of callbacks. Before we had:
git_diff_ui_config
-> git_diff_basic_config
-> git_color_default_config
-> git_default_config
Now we have:
git_diff_ui_config
-> git_color_config
-> git_diff_basic_config
-> git_default_config
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually this function figures out for itself whether stdout
is a tty. However, it has an extra parameter just to allow
git-config to override the auto-detection for its
--get-colorbool option.
Instead of an extra parameter, let's just use a global
variable. This makes calling easier in the common case, and
will make refactoring the colorbool code much simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.
This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rc/histogram-diff:
xdiff/xhistogram: drop need for additional variable
xdiff/xhistogram: rely on xdl_trim_ends()
xdiff/xhistogram: rework handling of recursed results
xdiff: do away with xdl_mmfile_next()
Make test number unique
xdiff/xprepare: use a smaller sample size for histogram diff
xdiff/xprepare: skip classification
teach --histogram to diff
t4033-diff-patience: factor out tests
xdiff/xpatience: factor out fall-back-diff function
xdiff/xprepare: refactor abort cleanups
xdiff/xprepare: use memset()
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
* jk/combine-diff-binary-etc:
combine-diff: respect textconv attributes
refactor get_textconv to not require diff_filespec
combine-diff: handle binary files as binary
combine-diff: calculate mode_differs earlier
combine-diff: split header printing into its own function
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Conflicts:
sha1_file.c
Port JGit's HistogramDiff algorithm over to C. Rough numbers (TODO) show
that it is faster than its --patience cousin, as well as the default
Meyers algorithm.
The implementation has been reworked to use structs and pointers,
instead of bitmasks, thus doing away with JGit's 2^28 line limit.
We also use xdiff's default hash table implementation (xdl_hash_bits()
with XDL_HASHLONG()) for convenience.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/combine-diff-binary-etc:
combine-diff: respect textconv attributes
refactor get_textconv to not require diff_filespec
combine-diff: handle binary files as binary
combine-diff: calculate mode_differs earlier
combine-diff: split header printing into its own function
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.
But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.
In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.
Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().
There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
Refactor the "do not stop feeding the backend early" logic into a small
helper function and use it in both run_diff_files() and diff_tree() that
has the stop-early optimization. We may later add other types of diffcore
transformation that require to look at the whole result like diff-filter
does, and having the logic in a single place is essential for longer term
maintainability.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often one is interested in the full --stat output only for commits which
change a few files, but not others, because larger restructuring gives a
--stat which fills a few screens.
Introduce a new option --stat-count=<count> which limits the --stat output
to the first <count> lines, followed by a "..." line. It can
also be given as the third parameter in
--stat=<width>,<name-width>,<count>.
Also, the unstuck form is supported analogous to the other two stat
parameters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, --stat calculates the longest name from all items but then
drops some (mode changes) from the output later on.
Instead, drop them from the namelen generation and calculation.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function actually does two things:
1. Load the userdiff driver for the filespec.
2. Decide whether the driver has a textconv component, and
initialize the textconv cache if applicable.
Only part (1) requires the filespec object, and some callers
may not have a filespec at all. So let's split them it into
two functions, and put part (2) with the userdiff code,
which is a better fit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With diff.suppress-blank-empty=true, "git diff --word-diff" would
output data that had been read from uninitialized heap memory.
The problem was that fn_out_consume did not account for the
possibility of a line with length 1, i.e., the empty context line
that diff.suppress-blank-empty=true converts from " \n" to "\n".
Since it assumed there would always be a prefix character (the space),
it decremented "len" unconditionally, thus passing len=0 to emit_line,
which would then blindly call emit_line_0 with len=-1 which would
pass that value on to fwrite as SIZE_MAX. Boom.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/dirstat-lines:
Mark dirstat error messages for translation
Improve error handling when parsing dirstat parameters
New --dirstat=lines mode, doing dirstat analysis based on diffstat
Allow specifying --dirstat cut-off percentage as a floating point number
Add config variable for specifying default --dirstat behavior
Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-file
Make --dirstat=0 output directories that contribute < 0.1% of changes
Add several testcases for --dirstat and friends
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
* jh/dirstat:
--dirstat: In case of renames, use target filename instead of source filename
Teach --dirstat not to completely ignore rearranged lines within a file
--dirstat-by-file: Make it faster and more correct
--dirstat: Describe non-obvious differences relative to --stat or regular diff
When encountering errors or unknown tokens while parsing parameters to the
--dirstat option, it makes sense to die() with an error message informing
the user of which parameter did not make sense. However, when parsing the
diff.dirstat config variable, we cannot simply die(), but should instead
(after warning the user) ignore the erroneous or unrecognized parameter.
After all, future Git versions might add more dirstat parameters, and
using two different Git versions on the same repo should not cripple the
older Git version just because of a parameter that is only understood by
a more recent Git version.
This patch fixes the issue by refactoring the dirstat parameter parsing
so that parse_dirstat_params() keeps on parsing parameters, even if an
earlier parameter was not recognized. When parsing has finished, it returns
zero if all parameters were successfully parsed, and non-zero if one or
more parameters were not recognized (with appropriate error messages
appended to the 'errmsg' argument).
The parse_dirstat_params() callers then decide (based on the return value
from parse_dirstat_params()) whether to warn and ignore (in case of
diff.dirstat), or to warn and die (in case of --dirstat).
The patch also adds a couple of tests verifying the correct behavior of
--dirstat and diff.dirstat in the face of unknown (possibly future) dirstat
parameters.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds an alternative implementation of show_dirstat(), called
show_dirstat_by_line(), which uses the more expensive diffstat analysis
(as opposed to show_dirstat()'s own (relatively inexpensive) analysis)
to derive the numbers from which the --dirstat output is computed.
The alternative implementation is controlled by the new "lines" parameter
to the --dirstat option (or the diff.dirstat config variable).
For binary files, the diffstat analysis counts bytes instead of lines,
so to prevent binary files from dominating the dirstat results, the
byte counts for binary files are divided by 64 before being compared to
their textual/line-based counterparts. This is a stupid and ugly - but
very cheap - heuristic.
In linux-2.6.git, running the three different --dirstat modes:
time git diff v2.6.20..v2.6.30 --dirstat=changes > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=lines > /dev/null
vs.
time git diff v2.6.20..v2.6.30 --dirstat=files > /dev/null
yields the following average runtimes on my machine:
- "changes" (default): ~6.0 s
- "lines": ~9.6 s
- "files": ~0.1 s
So, as expected, there's a considerable performance hit (~60%) by going
through the full diffstat analysis as compared to the default "changes"
analysis (obviously, "files" is much faster than both). As such, the
"lines" mode is probably only useful if you really need the --dirstat
numbers to be consistent with the numbers returned from the other
--*stat options.
The patch also includes documentation and tests for the new dirstat mode.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the first digit after the decimal point is kept, as the dirstat
calculations all happen in permille.
Selftests verifying floating-point percentage input has been added.
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new diff.dirstat config variable takes the same arguments as
'--dirstat=<args>', and specifies the default arguments for --dirstat.
The config is obviously overridden by --dirstat arguments passed on the
command line.
When not specified, the --dirstat defaults are 'changes,noncumulative,3'.
The patch also adds several tests verifying the interaction between the
diff.dirstat config variable, and the --dirstat command line option.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of having multiple interconnected dirstat-related options, teach
the --dirstat option itself to accept all behavior modifiers as parameters.
- Preserve the current --dirstat=<limit> (where <limit> is an integer
specifying a cut-off percentage)
- Add --dirstat=cumulative, replacing --cumulative
- Add --dirstat=files, replacing --dirstat-by-file
- Also add --dirstat=changes and --dirstat=noncumulative for specifying the
current default behavior. These allow the user to reset other --dirstat
parameters (e.g. 'cumulative' and 'files') occuring earlier on the
command line.
The deprecated options (--cumulative and --dirstat-by-file) are still
functional, although they have been removed from the documentation.
Allow multiple parameters to be separated by commas, e.g.:
--dirstat=files,10,cumulative
Update the documentation accordingly, and add testcases verifying the
behavior of the new syntax.
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expected output from --dirstat=0, is to include any directory with
changes, even if those changes contribute a minuscule portion of the total
changes. However, currently, directories that contribute less than 0.1% are
not included, since their 'permille' value is 0, and there is an
'if (permille)' check in gather_dirstat() that causes them to be ignored.
This test is obviously intended to exclude directories that contribute no
changes whatsoever, but in this case, it hits too broadly. The correct
check is against 'this_dir' from which the permille is calculated. Only if
this value is 0 does the directory truly contribute no changes, and should
be skipped from the output.
This patches fixes this issue, and updates corresponding testcases to
expect the new behvaior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rename-degrade-cc-to-c:
diffcore-rename: fall back to -C when -C -C busts the rename limit
diffcore-rename: record filepair for rename src
diffcore-rename: refactor "too many candidates" logic
builtin/diff.c: remove duplicated call to diff_result_code()
* jh/dirstat:
--dirstat: In case of renames, use target filename instead of source filename
Teach --dirstat not to completely ignore rearranged lines within a file
--dirstat-by-file: Make it faster and more correct
--dirstat: Describe non-obvious differences relative to --stat or regular diff
e9c8409 (diff-index --cached --raw: show tree entry on the LHS for
unmerged entries., 2007-01-05) added a <mode, object name> pair as
parameters to this function, to store them in the pre-image side of an
unmerged file pair. Now the function is fixed to return the filepair it
queued, we can make the caller on the special case codepath to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying diff_queue() returns diff_filepair so that the caller can
further add information to it, and the helper function diff_unmerge()
utilizes the feature itself, but does not expose it to its callers, which
was kind of selfish.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes --dirstat analysis to count "damage" toward the target filename,
rather than the source filename. For renames within a directory, this won't
matter to the final output, but when moving files between diretories, the
output now lists the target directory rather than the source directory.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the --dirstat analysis ignores when lines within a file are
rearranged, because the "damage" calculated by show_dirstat() is 0.
However, if the object name has changed, we already know that there is
some damage, and it is unintuitive to claim there is _no_ damage.
Teach show_dirstat() to assign a minimum amount of damage (== 1) to
entries for which the analysis otherwise yields zero damage, to still
represent that these files are changed, instead of saying that there
is no change.
Also, skip --dirstat analysis when the object names are the same (e.g. for
a pure file rename).
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when using --dirstat-by-file, it first does the full --dirstat
analysis (using diffcore_count_changes()), and then resets 'damage' to 1,
if any damage was found by diffcore_count_changes().
But --dirstat-by-file is not interested in the file damage per se. It only
cares if the file changed at all. In that sense it only cares if the blob
object for a file has changed. We therefore only need to compare the
object names of each file pair in the diff queue and we can skip the
entire --dirstat analysis and simply set 'damage' to 1 for each entry
where the object name has changed.
This makes --dirstat-by-file faster, and also bypasses --dirstat's practice
of ignoring rearranged lines within a file.
The patch also contains an added testcase verifying that --dirstat-by-file
now detects changes that only rearrange lines within a file.
Signed-off-by: Johan Herland <johan@herland.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reviewing a patch while concentrating primarily on the text after
then change, wading through pages of deleted text involves a cognitive
burden.
Introduce the -D option that omits the preimage text from the patch output
for deleted files. When used with -B (represent total rewrite as a single
wholesale deletion followed by a single wholesale addition), the preimage
text is also omitted.
To prevent such a patch from being applied by mistake, the output is
designed not to be usable by "git apply" (or GNU "patch"); it is strictly
for human consumption.
It of course is possible to "apply" such a patch by hand, as a human can
read the intention out of such a patch. It however is impossible to apply
such a patch even manually in reverse, as the whole point of this option
is to omit the information necessary to do so from the output.
Initial request by Mart Sõmermaa, documentation and tests helped by
Michael J Gruber.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are too many paths in the project, the number of rename source
candidates "git diff -C -C" finds will exceed the rename detection limit,
and no inexact rename detection is performed. We however could fall back
to "git diff -C" if the number of modified paths is sufficiently small.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix warnings from 'make check'.
- These files don't include 'builtin.h' causing sparse to complain that
cmd_* isn't declared:
builtin/clone.c:364, builtin/fetch-pack.c:797,
builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78,
builtin/merge-index.c:69, builtin/merge-recursive.c:22
builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426
builtin/notes.c:822, builtin/pack-redundant.c:596,
builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149,
builtin/remote.c:1512, builtin/remote-ext.c:240,
builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384,
builtin/unpack-file.c:25, builtin/var.c:75
- These files have symbols which should be marked static since they're
only file scope:
submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13,
submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79,
unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123,
url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48
- These files redeclare symbols to be different types:
builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571,
usage.c:49, usage.c:58, usage.c:63, usage.c:72
- These files use a literal integer 0 when they really should use a NULL
pointer:
daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362
While we're in the area, clean up some unused #includes in builtin files
(mostly exec_cmd.h).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:
struct foo {
int bar;
char *baz;
};
Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.
Linus sayeth:
Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only need the size, which is much cheaper to get,
especially if it is a big binary file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic in builtin_diffstat assumes that a
complete_rewrite pair should have its lines counted. This is
nonsensical for binary files and leads to confusing things
like:
$ git diff --stat --summary HEAD^ HEAD
foo.rand | Bin 4096 -> 4096 bytes
1 files changed, 0 insertions(+), 0 deletions(-)
$ git diff --stat --summary -B HEAD^ HEAD
foo.rand | 34 +++++++++++++++-------------------
1 files changed, 15 insertions(+), 19 deletions(-)
rewrite foo.rand (100%)
So let's reorder the function to handle binary files first
(which from diffstat's perspective look like complete
rewrites anyway), then rewrites, then actual diffstats.
There are two bonus prizes to this reorder:
1. It gets rid of a now-superfluous goto.
2. The binary case is at the top, which means we can
further optimize it in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We did this once before in 5070591 (bump rename limit
defaults, 2008-04-30). Back then, we were shooting for about
1 second for a diff/log calculation, and 5 seconds for a
merge.
There are a few new things to consider, though:
1. Average processors are faster now.
2. We've seen on the mailing list some ugly merges where
not using inexact rename detection leads to many more
conflicts. Merges of this size take a long time
anyway, so users are probably happy to spend a little
bit of time computing the renames.
Let's bump the diff/merge default limits from 200/500 to
400/1000. Those are 2 seconds and 10 seconds respectively on
my modern hardware.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ks/blame-worktree-textconv-cached:
fill_textconv(): Don't get/put cache if sha1 is not valid
t/t8006: Demonstrate blame is broken when cachetextconv is on
When blaming files in the working tree, the filespec is marked with
!sha1_valid, as we have not given the contents an object name yet. The
function to cache textconv results (keyed on the object name), however,
didn't check this condition, and ended up on storing the cached result
under a random object name.
Cc: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Cc: Clément Poulain <clement.poulain@ensimag.imag.fr>
Cc: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Cc: Jeff King <peff@peff.net>
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kb/diff-C-M-synonym:
diff: use "find" instead of "detect" as prefix for long forms of -M and -C
diff: add --detect-copies-harder as a synonym for --find-copies-harder
It is more consistent with existing --find-copies-harder; luckily "detect"
variant has not appeared in any officially released version of git.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The low-level diff code will happily produce totally bogus diff output
with a broken repository via format-patch and friends by treating missing
objects as empty files. Let's prevent that from happening any longer.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already detect invalid input to these functions, but we
simply exit with an error code, never saying anything as
simple as "your input was wrong". Let's fix that.
Before:
$ git diff -CM
$ echo $?
128
After:
$ git diff -CM
error: invalid argument to -C: M
$ echo $?
128
There should be no problems with having diff_opt_parse print
to stderr, as there is already precedent in complaining
about bogus --color and --output arguments.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The whitespace check printed the value of the wrong variable, i.e. the
beginning of the block of blank lines at the EOF (possibly absent) in the
old file.
As "git diff --check" is used by users to check their changes before
making a commit, we should point at the line number in the file after
the change.
Signed-off-by: Christoph Mallon <christoph.mallon@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/pickaxe-grep:
diff/log -G<pattern>: tests
git log/diff: add -G<regexp> that greps in the patch text
diff: pass the entire diff-options to diffcore_pickaxe()
gitdiffcore doc: update pickaxe description
The option argument is either after the equal sign in --output=... or in
the next command-line argument. optarg is the reliable way to access it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new long-form options --detect-renames[=<n>], --detect-copies[=<n>],
and --break-rewrites[=[<n>][/<m>]] as synonyms for the -M, -C, and -B
options (respectively).
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recursive merge strategy turns on rename detection but leaves the
rename threshold at the default. Add a strategy option to allow the user
to specify a rename threshold to use.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Visual aids, such as the function name in the hunk
header, are not necessary for the purposes of
computing a patch ID.
This is a performance optimization.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we're diffing symlinks, we consider the contents to be
the pathname that the symlink points to. When a user sets up
a userdiff driver like "*.pdf diff=pdf", their "diff.pdf.*"
config generally tells us what to do with the content of
pdf files.
With the current code, we will actually process a symlink
like "link.pdf" using a configured pdf driver, meaning we
are using contents which consist of a pathname with
configuration that is expecting contents that consist of an
actual pdf file.
The most noticeable example of this would have been
textconv; however, it was already protected in its own
textconv-specific code path. We can still see the breakage
with something like "diff.*.binary", though. You could
also see it with diff.*.funcname, though it is a bit harder
to trigger accidentally there.
This patch adds a check for S_ISREG lower in the callstack
than the textconv-specific check, which should block use of
any userdiff config for non-regular files. We can drop the
check in the textconv code, which is now redundant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "-G<regexp>" that is similar to "-S<regexp> --pickaxe-regexp" to the
"git diff" family of commands. This limits the diff queue to filepairs
whose patch text actually has an added or a deleted line that matches the
given regexp. Unlike "-S<regexp>", changing other parts of the line that
has a substring that matches the given regexp IS counted as a change, as
such a change would appear as one deletion followed by one addition in a
patch text.
Unlike -S (pickaxe) that is intended to be used to quickly detect a commit
that changes the number of occurrences of hits between the preimage and
the postimage to serve as a part of larger toolchain, this is meant to be
used as the top-level Porcelain feature.
The implementation unfortunately has to run "diff" twice if you are
running "log" family of commands to produce patches in the final output
(e.g. "git log -p" or "git format-patch"). I think we _could_ cache the
result in-core if we wanted to, but that would require larger surgery to
the diffcore machinery (i.e. adding an extra pointer in the filepair
structure to keep a pointer to a strbuf around, stuff the textual diff to
the strbuf inside diffgrep_consume(), and make use of it in later stages
when it is available) and it may not be worth it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/shortopt-detached:
log: parse separate option for --glob
log: parse separate options like git log --grep foo
diff: parse separate options --stat-width n, --stat-name-width n
diff: split off a function for --stat-* option parsing
diff: parse separate options like -S foo
Conflicts:
revision.c
* jc/maint-follow-rename-fix:
log: test for regression introduced in v1.7.2-rc0~103^2~2
diff --follow: do call diffcore_std() as necessary
diff --follow: do not waste cycles while recursing
* jl/submodule-ignore-diff:
Add tests for the diff.ignoreSubmodules config option
Add the 'diff.ignoreSubmodules' config setting
Submodules: Use "ignore" settings from .gitmodules too for diff and status
Submodules: Add the new "ignore" config option for diff and status
Conflicts:
diff.c
Since commit 2f82f760 (Take binary diffs into
account for "git rebase"), binary files are
included in patch ID computation. Binary files are
diffed using the text diff algorithm, however,
which has a huge impact on performance. The
following tests performance for a 50000 line file
marked as binary in .gitattributes.
$ git format-patch --stdout --ignore-if-in-upstream master
real 0m0.367s
user 0m0.354s
sys 0m0.010s
Instead of diffing the binary files, hash the pre-
and post-image sha1, which is just as unique. As a
result, performance is much improved.
$ git format-patch --stdout --ignore-if-in-upstream master
real 0m0.016s
user 0m0.015s
sys 0m0.001s
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually, diff frontends populate the output queue with filepairs without
any rename information and call diffcore_std() to sort the renames out.
When --follow is in effect, however, diff-tree family of frontend has a
hack that looks like this:
diff-tree frontend
-> diff_tree_sha1()
. populate diff_queued_diff
. if --follow is in effect and there is only one change that
creates the target path, then
-> try_to_follow_renames()
-> diff_tree_sha1() with no pathspec but with -C
-> diffcore_std() to find renames
. if rename is found, tweak diff_queued_diff and put a
single filepair that records the found rename there
-> diffcore_std()
. tweak elements on diff_queued_diff by
- rename detection
- path ordering
- pickaxe filtering
We need to skip parts of the second call to diffcore_std() that is related
to rename detection, and do so only when try_to_follow_renames() did find
a rename. Earlier 1da6175 (Make diffcore_std only can run once before a
diff_flush, 2010-05-06) tried to deal with this issue incorrectly; it
unconditionally disabled any second call to diffcore_std().
This hopefully fixes the breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two ways a user might want to use "diff --relative":
1. For a file in a directory, like "subdir/file", the user
can use "--relative=subdir/" to strip the directory.
2. To strip part of a filename, like "foo-10", they can
use "--relative=foo-".
We currently handle both of those situations. However, if the user passes
"--relative=subdir" (without the trailing slash), we produce inconsistent
results. For the unified diff format, we collapse the double-slash of
"a//file" correctly into "a/file". But for other formats (raw, stat,
name-status), we end up with "/file".
We can do what the user means here and strip the extra "/" (and only a
slash). We are not hurting any existing users of (2) above with this
behavior change because the existing output for this case was nonsensical.
Patch by Jakub, tests and commit message by Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have a lot of submodules checked out, the time penalty to check
for dirty submodules can easily imply a multiplication of the total time
by the factor 20. This makes the difference between almost instantaneous
(< 2 seconds) and unbearably slow (> 50 seconds) here, since the disk
caches are constantly overloaded.
To this end, the submodule.*.ignore config option was introduced, but it
is per-submodule.
This commit introduces a global config setting to set a default
(porcelain) value for the --ignore-submodules option, keeping the
default at 'none'. It can be overridden by the submodule.*.ignore
setting and by the --ignore-submodules option.
Incidentally, this commit fixes an issue with the overriding logic:
multiple --ignore-submodules options would not clear the previously
set flags.
While at it, fix a typo in the documentation for submodule.*.ignore.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new "ignore" config option controls the default behavior for "git
status" and the diff family. It specifies under what circumstances they
consider submodules as modified and can be set separately for each
submodule.
The command line option "--ignore-submodules=" has been extended to accept
the new parameter "none" for both status and diff.
Users that chose submodules to get rid of long work tree scanning times
might want to set the "dirty" option for those submodules. This brings
back the pre 1.7.0 behavior, where submodule work trees were never
scanned for modifications. By using "--ignore-submodules=none" on the
command line the status and diff commands can be told to do a full scan.
This option can be set to the following values (which have the same name
and meaning as for the "--ignore-submodules" option of status and diff):
"all": All changes to the submodule will be ignored.
"dirty": Only differences of the commit recorded in the superproject and
the submodules HEAD will be considered modifications, all changes
to the work tree of the submodule will be ignored. When using this
value, the submodule will not be scanned for work tree changes at
all, leading to a performance benefit on large submodules.
"untracked": Only untracked files in the submodules work tree are ignored,
a changed HEAD and/or modified files in the submodule will mark it
as modified.
"none" (which is the default): Either untracked or modified files in a
submodules work tree or a difference between the subdmodules HEAD
and the commit recorded in the superproject will make it show up
as changed. This value is added as a new parameter for the
"--ignore-submodules" option of the diff family and "git status"
so the user can override the settings in the configuration.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign for unstuck forms of options.
[jn: with some refactoring]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As an optimization, the diff_opt_parse() switchboard has
a single case for all the --stat-* options. Split it
off into a separate function so we can enhance it
without bringing code dangerously close to the right
margin.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the option parsing logic in revision.c to accept separate forms
like `-S foo' in addition to `-Sfoo'. The rest of git already accepted
this form, but revision.c still used its own option parsing.
Short options affected are -S<string>, -l<num> and -O<orderfile>, for
which an empty string wouldn't make sense, hence -<option> <arg> isn't
ambiguous.
This patch does not handle --stat-name-width and --stat-width, which are
special-cases where diff_long_opt do not apply. They are handled in a
separate patch to ease review.
Original patch by Matthieu Moy, plus refactoring by Jonathan Nieder.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It introduced a macro to reduce repeated assignments to three fields,
but an unrelated and incorrect change snuck in by mistake, which broke
commands like "git diff-files -p --submodule".
Noticed by Sven Verdoolaege.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --graph is in effect, the line-prefix typically has colored graph
line segments and ends with reset. The color sequence "set" given to
this function is for showing the metainfo part of the patch text and
(1) it should not be applied to the graph lines, and (2) it will be
reset at the end of line_prefix so it won't be in effect anyway.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/status-ignore-submodules:
Add the option "--ignore-submodules" to "git status"
git submodule: ignore dirty submodules for summary and status
Conflicts:
builtin/commit.c
t/t7508-status.sh
wt-status.c
wt-status.h
* jl/maint-diff-ignore-submodules:
t4027,4041: Use test -s to test for an empty file
Add optional parameters to the diff option "--ignore-submodules"
git diff: rename test that had a conflicting name
In some use cases it is not desirable that "git status" considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree (this was the behavior before
1.7.0). An example for that are scripts which just want to check for
submodule commits while ignoring any changes to the work tree. Also users
having large submodules known not to change might want to use this option,
as the - sometimes substantial - time it takes to scan the submodule work
tree(s) is saved when using the "dirty" parameter.
And if you want to ignore any changes to submodules, you can now do that
by using this option without parameters or with "all" (when the config
option status.submodulesummary is set, using "all" will also suppress the
output of the submodule summary).
A new function handle_ignore_submodules_arg() is introduced to parse this
option new to "git status" in a single location, as "git diff" already
knew it.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* by/diff-graph:
Make --color-words work well with --graph
graph.c: register a callback for graph output
Emit a whole line in one go
diff.c: Output the text graph padding before each diff line
Output the graph columns at the end of the commit message
Add a prefix output callback to diff output
Conflicts:
diff.c
In some use cases it is not desirable that the diff family considers
submodules that only contain untracked content as dirty. This may happen
e.g. when the submodule is not under the developers control and not all
build generated files have been added to .gitignore by the upstream
developers. Using the "untracked" parameter for the "--ignore-submodules"
option disables checking for untracked content and lets git diff report
them as changed only when they have new commits or modified content.
Sometimes it is not wanted to have submodules show up as changed when they
just contain changes to their work tree. An example for that are scripts
which just want to check for submodule commits while ignoring any changes
to the work tree. Also users having large submodules known not to change
might want to use this option, as the - sometimes substantial - time it
takes to scan the submodule work tree(s) is saved.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The textconv functionality allows one to convert a file into text before
running diff. But this functionality can be useful to other features
such as blame.
Signed-off-by: Axel Bonnet <axel.bonnet@ensimag.imag.fr>
Signed-off-by: Clément Poulain <clement.poulain@ensimag.imag.fr>
Signed-off-by: Diane Gasselin <diane.gasselin@ensimag.imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bug was introduced in 3e97c7c6af
(No diff -b/-w output for all-whitespace changes, Nov 19 2009)
that made the lines:
diff --git a/bar b/sub/bar
similarity index 100%
rename from bar
rename to sub/bar
disappear from "git show -C -C" output when file bar is a binary
file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'--color-words' algorithm can be described as:
1. collect a the minus/plus lines of a diff hunk, divided into
minus-lines and plus-lines;
2. break both minus-lines and plus-lines into words and
place them into two mmfile_t with one word for each line;
3. use xdiff to run diff on the two mmfile_t to get the words level diff;
And for the common parts of the both file, we output the plus side text.
diff_words->current_plus is used to trace the current position of the plus file
which printed. diff_words->last_minus is used to trace the last minus word
printed.
For '--graph' to work with '--color-words', we need to output the graph prefix
on each line of color words output. Generally, there are two conditions on
which we should output the prefix.
1. diff_words->last_minus == 0 &&
diff_words->current_plus == diff_words->plus.text.ptr
that is: the plus text must start as a new line, and if there is no minus
word printed, a graph prefix must be printed.
2. diff_words->current_plus > diff_words->plus.text.ptr &&
*(diff_words->current_plus - 1) == '\n'
that is: a graph prefix must be printed following a '\n'
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the graph prefix will be printed when calling
emit_line, so the functions should be used to emit a
complete line out once a time. No one should call
emit_line to just output some strings instead of a
complete line.
Use a strbuf to compose the whole line, and then
call emit_line to output it once.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change output from diff with -p/--dirstat/--binary/--numstat/--stat/
--shortstat/--check/--summary options to align with graph paddings.
Thanks Jeff King <peff@peff.net> for reporting the '--summary' bug and
his initial patch.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback can be used to add some prefix string to each line of
diff output.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the metainfo section of git diffs there's an "index" line providing
abbreviated (unless --full-index is used) blob SHA1s from the
pre-/post-images used to generate the diff. These provide hints that
can be used to reconstruct a 3-way merge when applying the patch
(see the --3way option to 'git am' for more details).
In order for this to work, however, the blob SHA1s must not be
abbreviated into ambiguity.
This patch eliminates the possible ambiguity by using find_unique_abbrev()
to produce the abbreviated SHA1s (instead of blind abbreviation by way of
"%.*s").
A testcase verifying the fix is also included.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* by/log-follow:
tests: rename duplicate t4205
Make git log --follow find copies among unmodified files.
Make diffcore_std only can run once before a diff_flush
Add a macro DIFF_QUEUE_CLEAR.
Coloring the extended headers where done as a whole not per line. less with
option -R (which is the default from git) does not support this coloring
mode because of performance reasons. The -r option would be an alternative
but has problems with lines that are longer than the screen. Therefore
stick to the idiom to color each line separately. The problem is, that the
result of ill_metainfo() will also be used as an parameter to an external
diff driver, so we need to disable coloring in this case.
Because coloring is now done inside fill_metainfo() we can simply add this
string to the diff header and therefore keep the last newline in the
extended header. This results also into the fact that the external diff
driver now gets this last newline too. Which is a change in behavior
but a good one.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here we simply make --patch a synonym for -p, whose mnemonic was "patch"
all along.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With new configuration "diff.noprefix", "git diff" does not show a source or destination prefix ala "git diff --no-prefix".
Signed-off-by: Eli Collins <eli@cloudera.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/cached-textconv:
diff: avoid useless filespec population
diff: cache textconv output
textconv: refactor calls to run_textconv
introduce notes-cache interface
make commit_tree a library function
When file renames/copies detection is turned on, the
second diffcore_std will degrade a 'C' pair to a 'R' pair.
And this may happen when we run 'git log --follow' with
hard copies finding. That is, the try_to_follow_renames()
will run diffcore_std to find the copies, and then
'git log' will issue another diffcore_std, which will reduce
'src->rename_used' and recognize this copy as a rename.
This is not what we want.
So, I think we really don't need to run diffcore_std more
than one time.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the diff_queue_struct code, this macro help
to reset the structure.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xdi_diff_outf() overrides the structure members of its last parameter,
ignoring any value that callers pass in. It's no surprise then that all
callers pass a pointer to an uninitialized structure. They also don't
read it after the call, so the parameter is neither used for input nor
for output. Turn it into a local variable of xdi_diff_outf().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the xdiff library had been introduced to git, all its callers
have used the flag XDF_NEED_MINIMAL. It makes sure that the smallest
possible diff is produced, but that takes quite some time if there are
lots of differences that can be expressed in multiple ways.
This flag makes a difference for only 0.1% of the non-merge commits in
the git repo of Linux, both in terms of diff size and execution time.
The patches there are mostly nice and small.
SungHyun Nam however reported a case in a different repo where a diff
took more than 20 times longer to generate with XDF_NEED_MINIMAL than
without. Rebasing became really slow.
This patch removes this flag from all callers. The default of xdiff is
saner because it has minimal to no impact in the normal case of small
diffs and doesn't incur that much of a speed penalty for large ones.
A follow-up patch may introduce a command line option to set the flag if
the user needs it, similar to GNU diff's -d/--minimal.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diffstat "added" and "changed" fields generally store
line counts; however, for binary files, they store file
sizes. Since we store and print these values as ints, a
diffstat on a file larger than 2G can show a negative size.
Instead, let's use uintmax_t, which should be at least 64
bits on modern platforms.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches the --color-words engine a more general interface that
supports two new modes:
* --word-diff=plain, inspired by the 'wdiff' utility (most similar to
'wdiff -n <old> <new>'): uses delimiters [-removed-] and {+added+}
* --word-diff=porcelain, which generates an ad-hoc machine readable
format:
- each diff unit is prefixed by [-+ ] and terminated by newline as
in unified diff
- newlines in the input are output as a line consisting only of a
tilde '~'
Both of these formats still support color if it is enabled, using it
to highlight the differences. --color-words becomes a synonym for
--word-diff=color, which is the color-only format. Also adds some
compatibility/convenience options.
Thanks to Junio C Hamano and Miles Bader for good ideas.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin_diff calls fill_mmfile fairly early, which in turn
calls diff_populate_filespec, which actually retrieves the
file's blob contents into a buffer. Long ago, this was
sensible as we would need to look at the blobs eventually.
These days, however, we may not ever want those blobs if we
end up using a textconv cache, and for large binary files
(exactly the sort for which you might have a textconv
cache), just retrieving the objects can be costly.
This patch just pushes the fill_mmfile call a bit later, so
we can avoid populating the filespec in some cases. There
is one thing to note that looks like a bug but isn't. We
push the fill_mmfile down into the first branch of a
conditional. It seems like we would need it on the other
branch, too, but we don't; fill_textconv does it for us (in
fact, before this, we were just writing over the results of
the fill_mmfile on that branch).
Here's a timing sample on a commit with 45 changed jpgs and
avis. The result is fully textconv cached, but we still
wasted a lot of time just pulling the blobs from storage.
The total size of the blobs (source and dest) is about
180M.
[before]
$ time git show >/dev/null
real 0m0.352s
user 0m0.148s
sys 0m0.200s
[after]
$ time git show >/dev/null
real 0m0.009s
user 0m0.004s
sys 0m0.004s
And that's on a warm cache. On a cold cache, the "after"
case is not much worse, but the "before" case has to do an
extra 180M of I/O.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running a textconv filter can take a long time. It's
particularly bad for a large file which needs to be spooled
to disk, but even for small files, the fork+exec overhead
can add up for something like "git log -p".
This patch uses the notes-cache mechanism to keep a fast
cache of textconv output. Caches are stored in
refs/notes/textconv/$x, where $x is the userdiff driver
defined in gitattributes.
Caching is enabled only if diff.$x.cachetextconv is true.
In my test repo, on a commit with 45 jpg and avi files
changed and a textconv to show their exif tags:
[before]
$ time git show >/dev/null
real 0m13.724s
user 0m12.057s
sys 0m1.624s
[after, first run]
$ git config diff.mfo.cachetextconv true
$ time git show >/dev/null
real 0m14.252s
user 0m12.197s
sys 0m1.800s
[after, subsequent runs]
$ time git show >/dev/null
real 0m0.352s
user 0m0.148s
sys 0m0.200s
So for a slight (3.8%) cost on the first run, we achieve an
almost 40x speed up on subsequent runs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a fill_textconv wrapper, which centralizes
some minor logic like error checking and handling the case
of no-textconv.
In addition to dropping the number of lines, this will make
it easier in future patches to handle multiple types of
textconv.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We correctly free() for the normal diff case, but leak for
rewrite diffs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the code simpler, run_textconv lumps all of its
error checking into one conditional. However, the
short-circuit means that an error in reading will prevent us
from calling finish_command, leaving a zombie child.
Clean up properly after errors.
Based-on-work-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-diff-dirtiness:
git status: ignoring untracked files must apply to submodules too
git status: Fix false positive "new commits" output for dirty submodules
Refactor dirty submodule detection in diff-lib.c
git status: Show detailed dirty status of submodules in long format
git diff --submodule: Show detailed dirty status of submodules
Testing if the output "new commits" should appear in the long format of
"git status" is done by comparing the hashes of the diffpair. This always
resulted in printing "new commits" for submodules that contained untracked
or modified content, even if they did not contain new commits. The reason
was that match_stat_with_submodule() did set the "changed" flag for dirty
submodules, resulting in two->sha1 being set to the null_sha1 at the call
sites, which indicates that new commits are present. This is changed so
that when no new commits are present, the same object names are in the
sha1 field for both sides of the filepair, and the working tree side will
have the "dirty_submodule" flag set when appropriate. For a submodule to
be seen as modified even when it just has a dirty work tree, some
conditions had to be extended to also check for the "dirty_submodule"
flag.
Unfortunately the test case that should have found this bug had been
changed incorrectly too. It is fixed and extended to test for other
combinations too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Moving duplicated code into the new function match_stat_with_submodule().
Replacing the implicit activation of detailed checks for the dirtiness of
submodules when DIFF_FORMAT_PATCH was selected with explicitly setting
the recently added DIFF_OPT_DIRTY_SUBMODULES option in diff_setup_done().
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git-branch, git-show-branch, git-grep, and all the diff-based
programs accept an optional argument <when> for --color. The argument
is a colorbool: "always", "never", or "auto". If no argument is given,
"always" is used; --no-color is an alias for --color=never. This makes
the command-line interface consistent with other GNU tools, such as `ls'
and `grep', and with the git-config color options. Note that, without
an argument, --color and --no-color work exactly as before.
To implement this, two internal changes were made:
1. Allow the first argument of git_config_colorbool() to be NULL,
in which case it returns -1 if the argument isn't "always", "never",
or "auto".
2. Add OPT_COLOR_FLAG(), OPT__COLOR(), and parse_opt_color_flag_cb()
to the option parsing library. The callback uses
git_config_colorbool(), so color.h is now a dependency
of parse-options.c.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.6.6:
dwim_ref: fix dangling symref warning
stash pop: remove 'apply' options during 'drop' invocation
diff: make sure --output=/bad/path is caught
Remove hyphen from "git-command" in two error messages
The option -w tells the diff machinery to inspect the contents to set the
exit status, instead of checking the blob object level difference alone.
However, --quiet tells the diff machinery not to look at the contents, which
means DIFF_FROM_CONTENTS has no chance to inspect the change.
Work it around by calling diff_flush_patch() with output sent to /dev/null.
Signed-off-by: Larry D'Anna <larry@elder-gods.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/diff-submodule-ignore:
Teach diff --submodule that modified submodule directory is dirty
git diff: Don't test submodule dirtiness with --ignore-submodules
Make ce_uptodate() trustworthy again
Since commit 8e08b4 git diff does append "-dirty" to the work tree side
if the working directory of a submodule contains new or modified files.
Lets do the same when the --submodule option is used.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-tree-walk:
read-tree --debug-unpack
unpack-trees.c: look ahead in the index
unpack-trees.c: prepare for looking ahead in the index
Aggressive three-way merge: fix D/F case
traverse_trees(): handle D/F conflict case sanely
more D/F conflict tests
tests: move convenience regexp to match object names to test-lib.sh
Conflicts:
builtin-read-tree.c
unpack-trees.c
unpack-trees.h
* jl/submodule-diff:
Performance optimization for detection of modified submodules
git status: Show uncommitted submodule changes too when enabled
Teach diff that modified submodule directory is dirty
Show submodules as modified when they contain a dirty work tree
* maint-1.6.4:
Fix mis-backport of t7002
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
* maint-1.6.3:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
builtin-commit.c
* maint-1.6.2:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
In the worst case is_submodule_modified() got called three times for
each submodule. The information we got from scanning the whole
submodule tree the first time can be reused instead.
New parameters have been added to diff_change() and diff_addremove(),
the information is stored in a new member of struct diff_filespec. Its
value is then reused instead of calling is_submodule_modified() again.
When no explicit "-dirty" is needed in the output the call to
is_submodule_modified() is not necessary when the submodules HEAD
already disagrees with the ref of the superproject, as this alone
marks it as modified. To achieve that, get_stat_data() got an extra
argument.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/run-command-use-shell:
t4030, t4031: work around bogus MSYS bash path conversion
diff: run external diff helper with shell
textconv: use shell to run helper
editor: use run_command's shell feature
run-command: optimize out useless shell calls
run-command: convert simple callsites to use_shell
t0021: use $SHELL_PATH for the filter script
run-command: add "use shell" option
A diff run in superproject only compares the name of the commit object
bound at the submodule paths. When we compare with a work tree and the
checked out submodule directory is dirty (e.g. has either staged or
unstaged changes, or has new files the user forgot to add to the index),
show the work tree side as "dirty".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
* maint-1.6.1:
base85: Make the code more obvious instead of explaining the non-obvious
base85: encode_85() does not use the decode table
base85 debug code: Fix length byte calculation
checkout -m: do not try to fall back to --merge from an unborn branch
branch: die explicitly why when calling "git branch [-a|-r] branchname".
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
diff.c
This makes the traversal of index be in sync with the tree traversal.
When unpack_callback() is fed a set of tree entries from trees, it
inspects the name of the entry and checks if the an index entry with
the same name could be hiding behind the current index entry, and
(1) if the name appears in the index as a leaf node, it is also
fed to the n_way_merge() callback function;
(2) if the name is a directory in the index, i.e. there are entries in
that are underneath it, then nothing is fed to the n_way_merge()
callback function;
(3) otherwise, if the name comes before the first eligible entry in the
index, the index entry is first unpacked alone.
When traverse_trees_recursive() descends into a subdirectory, the
cache_bottom pointer is moved to walk index entries within that directory.
All of these are omitted for diff-index, which does not even want to be
fed an index entry and a tree entry with D/F conflicts.
This fixes 3-way read-tree and exposes a bug in other parts of the system
in t6035, test #5. The test prepares these three trees:
O = HEAD^
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/b/c/d
100644 blob e69de29bb2 a/x
A = HEAD
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/b/c/d
100644 blob 587be6b4c3f93f93c489c0111bba5596147a26cb a/x
B = master
120000 blob a36b77384451ea1de7bd340ffca868249626bc52 a/b
100644 blob e69de29bb2 a/b-2/c/d
100644 blob e69de29bb2 a/x
With a clean index that matches HEAD, running
git read-tree -m -u --aggressive $O $A $B
now yields
120000 a36b77384451ea1de7bd340ffca868249626bc52 3 a/b
100644 e69de29bb2 0 a/b-2/c/d
100644 e69de29bb2 1 a/b/c/d
100644 e69de29bb2 2 a/b/c/d
100644 587be6b4c3f93f93c489c0111bba5596147a26cb 0 a/x
which is correct. "master" created "a/b" symlink that did not exist,
and removed "a/b/c/d" while HEAD did not do touch either path.
Before this series, read-tree did not notice the situation and resolved
addition of "a/b" and removal of "a/b/c/d" independently. If A = HEAD had
another path "a/b/c/e" added, this merge should conflict but instead it
silently resolved "a/b" and then immediately overwrote it to add
"a/b/c/e", which was quite bogus.
Tests in t1012 start to work with this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is mostly to make it more consistent with the rest of
git, which uses the shell to exec helpers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently textconv helpers are run directly. Running through
the shell is useful because the user can provide a program
with command line arguments, like "antiword -f".
It also makes textconv more consistent with other parts of
git, most of which run their helpers using the shell.
The downside is that textconv helpers with shell
metacharacters (like space) in the filename will be broken.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Documentation: always respect core.worktree if set
* maint-1.6.1:
textconv: stop leaking file descriptors
commit: --cleanup is a message option
git count-objects: handle packs bigger than 4G
t7102: make the test fail if one of its check fails
Conflicts:
builtin-commit.c
diff.c
We read the output from textconv helpers over a pipe, but we
never actually closed our end of the pipe after using it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/1.7.0-diff-whitespace-only-status:
diff.c: fix typoes in comments
Make test case number unique
diff: Rename QUIET internal option to QUICK
diff: change semantics of "ignore whitespace" options
Conflicts:
diff.h
* maint:
Git 1.6.5.7
worktree: don't segfault with an absolute pathspec without a work tree
ignore unknown color configuration
help.autocorrect: do not run a command if the command given is junk
Illustrate "filter" attribute with an example
When parsing the config file, if there is a value that is
syntactically correct but unused, we generally ignore it.
This lets non-core porcelains store arbitrary information in
the config file, and it means that configuration files can
be shared between new and old versions of git (the old
versions might simply ignore certain configuration).
The one exception to this is color configuration; if we
encounter a color.{diff,branch,status}.$slot variable, we
die if it is not one of the recognized slots (presumably as
a safety valve for user misconfiguration). This behavior
has existed since 801235c (diff --color: use
$GIT_DIR/config, 2006-06-24), but hasn't yet caused a
problem. No porcelain has wanted to store extra colors, and
we once a color area (like color.diff) has been introduced,
we've never changed the set of color slots.
However, that changed recently with the addition of
color.diff.func. Now a user with color.diff.func in their
config can no longer freely switch between v1.6.6 and older
versions; the old versions will complain about the existence
of the variable.
This patch loosens the check to match the rest of
git-config; unknown color slots are simply ignored. This
doesn't fix this particular problem, as the older version
(without this patch) is the problem, but it at least
prevents it from happening again in the future.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inspired by the coloring of quilt.
Introduce a separate color and paint the hunk comment part, i.e. the name
of the function, in a separate color "diff.func" (defaults to plain).
Whitespace between hunk header and hunk comment is printed in plain color.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When emit_line() is called with an empty line (but non-zero length, as we
send line terminating LF or CRLF to the function), it used to emit
<SET><RESET> followed by a newline. Stop the wastefulness.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change git-diff's whitespace-ignoring modes to generate
output only if a non-empty patch results, which git-apply
rejects.
Update the tests to look for the new behavior.
Signed-off-by: Greg Bacon <gbacon@dbresearch.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-diff-color-words:
diff --color-words: bit of clean-up
diff --color-words -U0: fix the location of hunk headers
t4034-diff-words: add a test for word diff without context
Conflicts:
diff.c
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
* js/maint-diff-color-words:
diff --color-words: bit of clean-up
diff --color-words -U0: fix the location of hunk headers
t4034-diff-words: add a test for word diff without context
Conflicts:
diff.c
When we introduced the "word diff" mode, we could have done one of three
things:
* change fn_out_consume() to "this is called every time a line worth of
diff becomes ready from the lower-level diff routine. This function
knows two sets of helpers (one for line-oriented diff, another for word
diff), and each set has various functions to be called at certain
places (e.g. hunk header, context, ...). The function's role is to
inspect the incoming line, and dispatch appropriate helpers to produce
either line- or word- oriented diff output."
* introduce fn_out_consume_word_diff() that is "this is called every time
a line worth of diff becomes ready from the lower-level diff routine,
and here is what we do to prepare word oriented diff using that line."
without touching fn_out_consume() at all.
* Do neither of the above, and keep fn_out_consume() to "this is called
every time a line worth of diff becomes ready from the lower-level diff
routine, and here is what we do to output line oriented diff using that
line." but sprinkle a handful of 'are we in word-diff mode? if so do
this totally different thing' at random places.
This patch is to at least abstract the details of "this totally different
thing" out from the main codepath, in order to improve readability.
We can later refactor it by introducing fn_out_consume_word_diff(), taking
the second route above, but that is a separate topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Colored word diff without context lines firstly printed all the hunk
headers among each other and then printed the diff.
This was due to the code relying on getting at least one context line at
the end of each hunk, where the colored words would be flushed (it is
done that way to be able to ignore rewrapped lines).
Noticed by Markus Heidelberg.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you use the option --submodule=log you can see the submodule
summaries inlined in the diff, instead of not-quite-helpful SHA-1 pairs.
The format imitates what "git submodule summary" shows.
To do that, <path>/.git/objects/ is added to the alternate object
databases (if that directory exists).
This option was requested by Jens Lehmann at the GitTogether in Berlin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
