Linus brought up that documentation for many commands have
incorrect attribution. I started counting lines again, but
ended up adding a handful of missing manual pages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When I run git-diff-tree on big change, it seems the command eats so
much memory. so I just put git under valgrind to see what's going on.
diff_free_filespec_data() doesn't free diff_filespec itself.
[jc: I ended up doing things slightly differently from Yasushi's
patch. The original idea was to use free_filespec_data() only to
free the data portion and keep useing the filespec itself, but
no existing code seems to do things that way, so I just yanked
that part out.]
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It seems that the localtime() libc routine doesn't care for finding a TZ
that's empty. It's ok with TZ not being set. Setting the TZ to GMT allowed
these tests to pass.
$ uname -v
Darwin Kernel Version 7.9.0: Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
Signed-off-by: Brad Roberts <braddr@puremagic.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The index cleanup code is executed via atexit() which is *after* main
has completed, so the stack allocated cache_file has gone out of scope.
Parisc seems to use stack in the destructor functions, so cache_file
gets partially overwritten leading to the predictable disastrous
consequences.
[jc: Just to make sure, I audited other users of the function
hold_index_file_for_update() to make sure they do not have this
problem; everybody else uses non-stack cache_file structure and
is fine. Thanks, James.]
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The "get_sha1_hex()" function is designed to work with SHA1 hex strings
that may be followed by arbitrary crud. However, that's not acceptable for
"get_sha1()" which is used for command line arguments etc: we don't want
to silently allow random characters after the end of the SHA1.
So verify that the hex string is all we have.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
You can resolve a tag, and it does the right thing except that it might
end up writing the tag itself into the resulting HEAD, which will confuse
subsequent operations no end.
This makes sure that when we resolve two heads, we will have turned them
into proper commits before we start acting on them.
This also fixes the parsing of "treeish^0", which would incorrectly
resolve to "treeish" instead of causing an error.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not that I have stricter patch submission standard than ordinary
projects, I wanted to have it to make sure people understand
what they are doing when they add their own Signed-off-by line.
Signed-off-by: Junio C Hamano <junkio@cox.net>
As brought up in the discussion which followed a patch to add a
signed-off-by line with the --sign flag to format-patch from
Johannes Schindelin, add --signoff to the git commit command.
Also add --verify to make sure the lines you introduced are
clean, which is more useful in commit but not very much in
format-patch as it was originally implemented, because finding
botches at format-patch time is too late.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-tk should be architecture independent.
git-core forgot to depend on perl.
Signed-Off-By: Matthias Urlichs <smurf@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Tools directory being separate is just a historical
coincidence. Build and install together with the main
directory, just like the clean target does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use <tab> instead of two spaces uniformly in the Makefile, even in the
ifdefs. Gives it a nice consistent look.
[jc: At the same time I indented the nested ifdefs to make them
slightly easier to read.]
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
$DESTDIR is more usual during the build than $dest and is what
is usually used in the makefiles, so let's use it too.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames COPTS to CFLAGS, because it's COPTS that was user
overridable. Also, -Wall is moved there because it's optional. What
was CFLAGS is now ALL_CFLAGS, which users should not override.
Defines are added to DEFINES. Since ALL_CFLAGS is recursively expanded,
it uses the final value of DEFINES.
Implicit rules are made explicit since the implicit rules use CFLAGS
rather than ALL_CFLAGS. I believe that serious projects should not rely
on implicit rules anyway. Percent rules are used because they are used
already and because they don't need the .SUFFIXES target.
[jc: in addition to updating the patch for 0.99.4, I fixed up a
glitch in Pavel's original patch which compiled sha1.o out of
mozilla-sha1/sha1.c, where it should have left the resulting
object file in mozilla-sha1 directory for later "ar".]
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the option "--sign" to git-format-patch-script which adds
a Signed-off-by: line automatically.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a beginning of resurrecting the multi-head pulling support
for git-fetch-pack command. The git-fetch-script wrapper still
only knows about fetching a single head, without renaming, so it is
not very useful unless you directly call git-fetch-pack itself yet.
It also fixes a longstanding obsolete description of how the command
discovers the list of local commits.
In the case where we don't know from context what type an object is, but
we don't have to fetch it, we need to parse it to determine the type
before processing it.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It didn't refetch an object it already had (good), but didn't process
it, either (bad). Synchronously process anything you already have.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"return" from a test would leave the exit trap set, which could cause a
spurious error message if it's the last test in the script or
--immediate is used.
The easiest solution would be to have a global trap that is set when
test-lib.sh is sourced and unset either by test_done(), error() or by
test_failure_() with --immediate.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I have noticed that "make test" fails without any explanations when the
"merge" utility is missing. I don't think tests should be silent in
case of failure.
It turned out that the particular test was using "exit" to interrupt the
test in case of an error. This caused the whole test script to exit.
No further tests would be run even if "--immediate" wasn't specified.
No error message was printed.
This patch does following:
All instances of "exit", "exit 1" and "(exit 1)" in tests have been
replaced with "return 1". In fact, "(exit 1)" had no effect.
File descriptor 5 is duplicated from file descriptor 1. This is needed
to print important error messages from tests.
New function test_run_() has been introduced. Any "return" in the test
would merely cause that function to return without skipping calls to
test_failure_() and test_ok_(). The new function also traps "exit" and
treats it like a fatal error (in case somebody reintroduces "exit" in
the tests).
test_expect_failure() and test_expect_success() check both the result of
eval and the return value of test_run_(). If the later is not 0, it's
always a failure because it indicates the the test didn't complete.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"t5400-send-pack.sh --verbose" stops waiting for user input. It happens
because "git log" uses less for output now. To prevent this, PAGER
should be set to cat.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
All test scripts should end with test_done, which reports the test
results. In the future, it could be used for other purposes, e.g. to
distinguish graceful end from "exit" in a test. This patch fixes
scripts that don't call test_done.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Split gitk off to its own package;
it needs tk installed, but nothing else does.
- Refer to GPL properly, don't install COPYING.
- Fix maintainer.
- Use dh_movefiles instead of dh_install;
we don't want to list everything *except* gitk.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In commit 4f7eb2e5a3 I fixed git-merge-base
getting confused by datestamps that caused it to traverse things in a
non-obvious order.
However, my fix was a very brute-force one, and it had some really
horrible implications for more complex trees with lots of parallell
development. It might end up traversing all the way to the root commit.
Now, normally that isn't that horrible: it's used mainly for merging, and
the bad cases really tend to happen fairly rarely, so if it takes a few
seconds, we're not in too bad shape.
However, gitk will also do the git-merge-base for every merge it shows,
because it basically re-does the trivial merge in order to show the
"interesting" parts. And there we'd really like the result to be
instantaneous.
This patch does that by walking the tree more completely, and using the
same heuristic as git-rev-list to decide "ok, the rest is uninteresting".
In one - hopefully fairly extreme - case, it made a git-merge-base go from
just under five seconds(!) to a tenth of a second on my machine.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The previous commit improved performance a lot but also meant that
we waited longer to see something drawn. This refines the heuristics
for when to call update so that (1) when we have finished processing
a bufferfull of information from git-rev-list, we call update if
enough time has elapsed, regardless of how many commits we've drawn,
and (2) the number of commits drawn between updates scales with the
total number of commits drawn: 1 for 1-99 commits, 10 for 100-9999
commits, or 100 for >= 10000 commits.
git-rev-parse HEAD^1 would fail, because of an off-by-one bug (but HEAD^
would yield the expected result). Also, when the parent does not exist, do
not silently return an incorrect SHA1. Of course, this no longer applies
to git-rev-parse alone, but every user of get_sha1().
While at it, add a test.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On a large repository with > 60,000 commits, each call to the Tk
update primitive (which gives Tk a chance to respond to events and
redraw the screen) was taking up to 0.2 seconds. Because the logic
was to call update after drawing a commit if 0.1 seconds had passed
since the last update call, we were calling it for every commit,
which was slowing us down enormously. Now we also require that we
have drawn 100 commits since the last update (as well as it being
at least 0.1 seconds since the last update). Drawing 100 commits
takes around 0.1 - 0.2 seconds (even in this large repo) on my G5.
Although it is uncertain if we would keep .git/branches for
long, the shorthand stored there can be used for pushing if it
is host:path/to/git format, so let's make use of it. This does
not use git-parse-remote because that script will be rewritten
quite a bit for updated pulling.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The store operation was never useful because we needed to fetch
the objects needed to complete the reference. Remove it.
The fetch command fetch multiple references shortly to
replace the lost "store" functionality in more a generic way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although these commands take only begin and end, not necessarily
generic SHA1 expressions rev-parse supports, supporting a..b
notation is good for consistency. This commit adds such without
breaking backward compatibility.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When rewinding the head, stash away the value of the original
HEAD in ORIG_HEAD, just like git-resolve-script does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Given one existing commit, revert the change the patch
introduces, and record a new commit that records it. This
requires your working tree to be clean (no modifications from
the HEAD commit).
This is based on what Linus posted to the list, with
enhancements he suggested, including the use of -M to attempt
reverting renames.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This introduces --pretty=oneline to git-rev-tree and
git-rev-list commands to show only the first line of the commit
message, without frills.
Signed-off-by: Junio C Hamano <junkio@cox.net>
While moving '-m' to make room for CVS compatible "here is the
log message", enhance source of log parameters.
-m 'message': a command line parameter.
-F <file> : a file (use '-' to read from stdin).
-C <commit> : message in existing commit.
-c <commit> : message in existing commit (allows further editing).
Longer option names for these options are also available.
While we are at it, get rid of shell array bashism.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I haven't audited the rev-parse users, but I am having a feeling
that many of them would choke when they expect a couple of SHA1
object names and malicious user feeds them "--max-count=6" or
somesuch to shoot himself in the foot. Anyway, this adds a
couple of missing parameters that affect the list of revs to be
returned from rev-list, not the flags that affect how they are
presented by rev-list. I think that is the intention, but I am
not quite sure.
Signed-off-by: Junio C Hamano <junkio@cox.net>
