The old rules used by fetch were coded as a series of ifs. The old
rules are:
1) match full refname if it starts with "refs/" or matches "HEAD"
2) verify that full refname starts with "refs/"
3) match abbreviated name in "refs/" if it starts with "heads/",
"tags/", or "remotes/".
4) match abbreviated name in "refs/heads/"
This is replaced by the new rules
a) match full refname
b) match abbreviated name prefixed with "refs/"
c) match abbreviated name prefixed with "refs/heads/"
The details of the new rules are different from the old rules. We no
longer verify that the full refname starts with "refs/". The new rule
(a) matches any full string. The old rules (1) and (2) were stricter.
Now, the caller is responsible for using sensible full refnames. This
should be the case for the current code. The new rule (b) is less
strict than old rule (3). The new rule accepts abbreviated names that
start with a non-standard prefix below "refs/".
Despite this modifications the new rules should handle all cases as
expected. Two tests are added to verify that fetch does not resolve
short tags or HEAD in remotes.
We may even think about loosening the rules a bit more and unify them
with the rev-parse rules. This would be done by replacing
ref_ref_fetch_rules with ref_ref_parse_rules. Note, the two new test
would break.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit changes the rules for resolving refspecs to match the
rules for resolving refs in rev-parse. git-rev-parse uses clear rules
to resolve a short ref to its full name, which are well documented.
The rules for resolving refspecs documented in git-send-pack were
less strict and harder to understand. This commit replaces them by
the rules of git-rev-parse.
The unified rules are easier to understand and better resolve ambiguous
cases. You can now push from a repository containing several branches
ending on the same short name.
Note, this may break existing setups. For example, "master" will no longer
resolve to "origin/master" even when there is no other "master" elsewhere.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use at least two rulesets for matching abbreviated refnames with
full refnames (starting with 'refs/'). git-rev-parse and git-fetch
use slightly different rules.
This commit introduces a new function refname_match
(const char *abbrev_name, const char *full_name, const char **rules).
abbrev_name is expanded using the rules and matched against full_name.
If a match is found the function returns true. rules is a NULL-terminate
list of format patterns with "%.*s", for example:
const char *ref_rev_parse_rules[] = {
"%.*s",
"refs/%.*s",
"refs/tags/%.*s",
"refs/heads/%.*s",
"refs/remotes/%.*s",
"refs/remotes/%.*s/HEAD",
NULL
};
Asterisks are included in the format strings because this is the form
required in sha1_name.c. Sharing the list with the functions there is
a good idea to avoid duplicating the rules. Hopefully this
facilitates unified matching rules in the future.
This commit makes the rules used by rev-parse for resolving refs to
sha1s available for string comparison. Before this change, the rules
were buried in get_sha1*() and dwim_ref().
A follow-up commit will refactor the rules used by fetch.
refname_match() will be used for matching refspecs in git-send-pack.
Thanks to Daniel Barkalow <barkalow@iabervon.org> for pointing
out that ref_matches_abbrev in remote.c solves a similar problem
and care should be taken to avoid confusion.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "push <remote> HEAD" to resolve HEAD on the local
side to its real branch name, e.g. master, and then act as if
the real branch name was specified. So we have a shorthand for
pushing the current branch. Besides HEAD, no other symbolic ref
is resolved.
Thanks to Daniel Barkalow <barkalow@iabervon.org> for suggesting
this implementation, which is much simpler than the
implementation proposed before.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/rev-list-interactive:
Fix parent rewriting in --early-output
revision walker: mini clean-up
Enhance --early-output format
Add "--early-output" log flag for interactive GUI use
Simplify topo-sort logic
* ph/diffopts:
Reorder diff_opt_parse options more logically per topics.
Make the diff_options bitfields be an unsigned with explicit masks.
Use OPT_BIT in builtin-pack-refs
Use OPT_BIT in builtin-for-each-ref
Use OPT_SET_INT and OPT_BIT in builtin-branch
parse-options new features.
Define NO_MKDTEMP for all variants of SunOS; Solaris 10 does not
have mkdtemp() and all the other versions our Makefile knows
about don't have it either.
NO_{SETENV,UNSETENV,C99_FORMAT,STRTOUMAX} definitions cannot be
unified across versions. Beginning with Solaris 10, the C-library
provides unsetenv(), setenv() and strtoumax(). Also 'z'/'t' formats
are supported. However, older versions of Solaris do not support
these.
Signed-off-by: Guido Ostkamp <git@ostkamp.fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
When building command line to invoke external grep, the
arguments to -A/-B/-C options were placd in randarg[] buffer,
but the code forgot that snprintf() does not count terminating
NUL in its return value. This caused "git grep -A1 -B2" to
invoke external grep with "-B21 -A1".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: Fix a typo and add a comma in an error message in git-svn
git-svn log: handle unreachable revisions like "svn log"
git-svn log: include commit log for the smallest revision in a range
git-svn log: fix ascending revision ranges
git-svn's dcommit must use subversion's config
git-svn: add tests for command-line usage of init and clone commands
When unreachable revisions are given to "svn log", it displays all commit
logs in the given range that exist in the current tree. (If no commit
logs are found in the current tree, it simply prints a single commit log
separator.) This patch makes "git-svn log" behave the same way.
Ten tests added to t/t9116-git-svn-log.sh.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
The "svn log -rM:N" command shows commit logs inclusive in the range [M,N].
Previously "git-svn log" always excluded the commit log for the smallest
revision in a range, whether the range was ascending or descending. With
this patch, the smallest revision in a range is always shown.
Updated tests for ascending and descending revision ranges.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Fixed typo in Git::SVN::Log::git_svn_log_cmd(). Previously a command like
"git-svn log -r1:4" would only show a commit log separator.
Added tests for ascending and descending revision ranges.
Signed-off-by: David D Kilzer <ddkilzer@kilzer.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
When doing dcommit git-svn must use subversion's config or newly created
files will not include svn's properties
(defined in [auto-props] with 'enable-auto-props = yes').
Signed-off-by: Konstantin V. Arkhipov <voxus@onphp.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Brown paper bag fix to avoid using non portable sed syntax. The
test by itself didn't catch what it was supposed to, anyways.
The new test first checks if git-tag correctly errors out when
the user exited the editor without editing the file. Then it
checks if what the user was presented in the editor was any
useful, which we define as the following:
* It begins with a single blank line, where the invoked editor
would typically place the editing curser at, so that the user
can immediately start typing;
* It has some instruction but that comes after that initial
blank line, all lines prefixed with "#". We specifically do
not check for the wording of this instruction.
* And it has nothing else, as the expected behaviour is "Hey
you did not leave any message".
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In "dir_struct", each exclusion element in the exclusion stack records a
base string (pointer to the beginning with length) so that we can tell
where it came from, but this pointer is just pointing at the parameter
that is given by the caller to the push_exclude_per_directory()
function.
While read_directory_recursive() runs, calls to excluded() makes use
the data in the exclusion elements, including this base string. The
caller of read_directory_recursive() is not supposed to free the
buffer it gave to push_exclude_per_directory() earlier, until it
returns.
The test case Bruce Stephens gave in the mailing list discussion
was simplified and added to the t3700 test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable. The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.
* git-ls-files does not notice any of the "ignore" files by
default, as it predates the standardized set of ignore files.
The calling scripts established the convention to use
.git/info/exclude, .gitignore, and later core.excludesfile.
* git-add and git-status know about it because they call
add_excludes_from_file() directly with their own notion of
which standard set of ignore files to use. This is just a
stupid duplication of code that need to be updated every time
the definition of the standard set of ignore files is
changed.
* git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
* git-merge-recursive uses hardcoded per-directory .gitignore
and nothing else. git-clean (scripted version) does not
honor core.* because its call to underlying ls-files does not
know about it. git-clean in C (parked in 'pu') doesn't either.
We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way. I am somewhat reluctant to make such a change.
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user has an "auto-prop" in his/her ~/.subversion/config file for
automatically setting the svn:keyword Id property on all ".c" files
(a reasonably common configuration in the Subversion world) then one
of the "svn propset" operations in the very first test would become a
no-op, which in turn would make the next commit a no-op.
This then caused the 25th test ('test propget') to fail because it
expects a certain number of commits to have taken place but the actual
number of commits was off by one.
Björn Steinbrink identified the "auto-prop" feature as the cause
of the failure. This patch avoids it by passing the "--no-auto-prop"
flag to "svn import" when setting up the test repository, thus ensuring
that the "svn propset" operation is no longer a no-op, regardless of the
users' settings in their config.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes pick out the original rfc822 'From' header and
include it in the body of the message. If the original
author's name needs encoding, then we should specify that in
the content-type header.
If we already had a content-type header in the mail, then we
may need to re-encode. The logic is there to detect
this case, but it doesn't actually do the re-encoding.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using an existing git repository to cache the perforce import we don't
fetch the branch mapping from perforce as that is a slow operation. However
the origin repository may not be fully up-to-date and therefore it may be
necessary to import more changes directly from Perforce.
Such a direct import needs self.knownBranches to be set up though, so
initialize it from the existing p4/* git branches.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In "dir_struct", each exclusion element in the exclusion stack records a
base string (pointer to the beginning with length) so that we can tell
where it came from, but this pointer is just pointing at the parameter
that is given by the caller to the push_exclude_per_directory()
function.
While read_directory_recursive() runs, calls to excluded() makes use
the data in the exclusion elements, including this base string. The
caller of read_directory_recursive() is not supposed to free the
buffer it gave to push_exclude_per_directory() earlier, until it
returns.
The test case Bruce Stephens gave in the mailing list discussion
was simplified and added to the t3700 test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Customize diff-options depending on particular command as follows,
mostly to make git-diff and git-format-patch manuals less confusing:
* git-format-patch:
- Mark --patch-with-stat as being the default.
- Change -p description so that it matches what it actually does and
so that it doesn't refer to absent "section on generating
patches".
* git-diff: mark -p as being the default.
* git-diff-index/git-diff-files/git-diff-tree: mark --raw as being
the default.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides a way for scripts to get at the new standard exclude
function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Solaris Workshop Compiler found a few unreachable statements.
Signed-off-by: Guido Ostkamp <git@ostkamp.fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable. The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.
* git-ls-files does not notice any of the "ignore" files by
default, as it predates the standardized set of ignore files.
The calling scripts established the convention to use
.git/info/exclude, .gitignore, and later core.excludesfile.
* git-add and git-status know about it because they call
add_excludes_from_file() directly with their own notion of
which standard set of ignore files to use. This is just a
stupid duplication of code that need to be updated every time
the definition of the standard set of ignore files is
changed.
* git-read-tree takes --exclude-per-directory=<gitignore>,
not because the flexibility was needed. Again, this was
because the option predates the standardization of the ignore
files.
* git-merge-recursive uses hardcoded per-directory .gitignore
and nothing else. git-clean (scripted version) does not
honor core.* because its call to underlying ls-files does not
know about it. git-clean in C (parked in 'pu') doesn't either.
We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way. I am somewhat reluctant to make such a change.
On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands. I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.
This patch is the first step to untangle this mess.
The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/fetch-fix:
git-fetch: avoid local fetching from alternate (again)
rev-list: Introduce --quiet to avoid /dev/null redirects
run-command: Support sending stderr to /dev/null
git-fetch: Always fetch tags if the object they reference exists
* bs/maint-commit-options:
git-commit: Add tests for invalid usage of -a/--interactive with paths
git-commit.sh: Fix usage checks regarding paths given when they do not make sense
* jc/maint-add-sync-stat:
t2200: test more cases of "add -u"
git-add: make the entry stat-clean after re-adding the same contents
ce_match_stat, run_diff_files: use symbolic constants for readability
Conflicts:
builtin-add.c
* jc/stash-create:
git-stash: Fix listing stashes
git-merge: no reason to use cpio anymore
Revert "rebase: allow starting from a dirty tree."
rebase: allow starting from a dirty tree.
stash: implement "stash create"
* bg/format-patch-N:
Rearrange git-format-patch synopsis to improve clarity.
format-patch: Test --[no-]numbered and format.numbered
format-patch: Add configuration and off switch for --numbered
* np/progress:
nicer display of thin pack completion
make display of total transferred fully accurate
remove dead code from the csum-file interface
git-fetch: be even quieter.
make display of total transferred more accurate
sideband.c: ESC is spelled '\033' not '\e' for portability.
fix display overlap between remote and local progress
