Commit 6b1db43109 ("clean: teach clean -d to preserve ignored paths",
2017-05-23) added the following code block (among others) to git-clean:
if (remove_directories)
dir.flags |= DIR_SHOW_IGNORED_TOO | DIR_KEEP_UNTRACKED_CONTENTS;
The reason for these flags is well documented in the commit message, but
isn't obvious just from looking at the code. Add some explanations to
the code to make it clearer.
Further, it appears git-2.26 did not correctly handle this combination
of flags from git-clean. With both these flags and without
DIR_SHOW_IGNORED_TOO_MODE_MATCHING set, git is supposed to recurse into
all untracked AND ignored directories. git-2.26.0 clearly was not doing
that. I don't know the full reasons for that or whether git < 2.27.0
had additional unknown bugs because of that misbehavior, because I don't
feel it's worth digging into. As per the huge changes and craziness
documented in commit 8d92fb2927 ("dir: replace exponential algorithm
with a linear one", 2020-04-01), the old algorithm was a mess and was
thrown out. What I can say is that git-2.27.0 correctly recurses into
untracked AND ignored directories with that combination.
However, in clean's case we don't need to recurse into ignored
directories; that is just a waste of time. Thus, when git-2.27.0
started correctly handling those flags, we got a performance regression
report. Rather than relying on other bugs in fill_directory()'s former
logic to provide the behavior of skipping ignored directories, make use
of the DIR_SHOW_IGNORED_TOO_MODE_MATCHING value specifically added in
commit eec0f7f2b7 ("status: add option to show ignored files
differently", 2017-10-30) for this purpose.
Reported-by: Brian Malehorn <bmalehorn@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I spent a long time trying to figure out how and whether the code worked
with different values of ignore, ignore_only, and remove_directories.
After lots of time setting up lots of testcases, sifting through lots of
print statements, and walking through the debugger, I finally realized
that one piece of code related to how it was all setup was found in
clean.c rather than dir.c. Make a change that would have made it easier
for me to do the extra testing by putting this handling in one spot.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dir.h documented quite clearly that DIR_SHOW_IGNORED and
DIR_SHOW_IGNORED_TOO are mutually exclusive, with a big comment to this
effect by the definition of both enum values. However, a command like
git clean -fx $DIR
would set both values for dir.flags. I _think_ it happened to work
because:
* As dir.h points out, DIR_KEEP_UNTRACKED_CONTENTS only takes effect
if DIR_SHOW_IGNORED_TOO is set.
* As coded, I believe DIR_SHOW_IGNORED would just happen to take
precedence over DIR_SHOW_IGNORED_TOO in the code as currently
constructed.
Which is a long way of saying "we just got lucky".
Fix clean.c to avoid setting these mutually exclusive values at the same
time, and add a check to dir.c that will throw a BUG() to prevent anyone
else from making this mistake.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of github.com:ruester/git-po-de:
l10n: de.po: Fix typo in the German translation of octopus
l10n: de.po: Update German translation for Git 2.27.0
f1e3df3169 (t: increase test coverage of signature verification output,
2020-03-04) adds GPG dependent tests to t4202 and t6200 that were found
problematic with at least OpenBSD 6.7.
Using an escaped '|' for alternations works only in some implementations
of grep (e.g. GNU and busybox).
It is not part of POSIX[1] and not supported by some BSD, macOS, and
possibly other POSIX compatible implementations.
Use `grep -E`, and write it using extended regular expression.
[1] https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html#tag_09_03
Helped-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To set the default hash algorithm you can set the `GIT_DEFAULT_HASH`
environment variable. In the documentation this variable is named
`GIT_DEFAULT_HASH_ALGORITHM`, which is incorrect.
Signed-off-by: Toon Claes <toon@iotcl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The explanation of the `--show-pulls` option added in commit 8d049e182e
("revision: --show-pulls adds helpful merges", 2020-04-10) consists of
several paragraphs and we use "+" throughout to tie them together in one
long chain of list continuations. Only thing is, we're not in any kind
of list, so these pluses end up being rendered literally.
The preceding few paragraphs describe `--ancestry-path` and there we
*do* have a list, since we've started one with `--ancestry-path::`. In
fact, we have several such lists for all the various history-simplifying
options we're discussing earlier in this file.
Thus, we're missing a list both from a consistency point of view and
from a practical rendering standpoint.
Let's start a list for `--show-pulls` where we start actually discussing
the option, and keep the paragraphs preceding it out of that list. That
is, drop all those pluses before the new list we're adding here.
Helped-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building with asciidoc-8.4.5 (as found on CentOS/Red Hat 6), the
period in the "[[files-in-.gitignore-are-tracked]]" anchor is not
properly parsed as a section:
WARNING: gitfaq.txt: line 245: missing [[files-in-.gitignore-are-tracked]] section
The resulting XML file fails to validate with xmlto:
xmlto: /git/Documentation/gitfaq.xml does not validate (status 3)
xmlto: Fix document syntax or use --skip-validation option
/git/Documentation/gitfaq.xml:3: element refentry: validity error :
Element refentry content does not follow the DTD, expecting
(beginpage? , indexterm* , refentryinfo? , refmeta? , (remark | link
| olink | ulink)* , refnamediv+ , refsynopsisdiv? , (refsect1+ |
refsection+)), got (refmeta refnamediv refsynopsisdiv refsect1
refsect1 refsect1 refsect1 variablelist refsect1 refsect1 )
Document /git/Documentation/gitfaq.xml does not validate
Let's avoid breaking users of platforms which ship an old version of
asciidoc, since the cost to do so is quite low.
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various doc fixes.
* ma/doc-fixes:
git-sparse-checkout.txt: add missing '
git-credential.txt: use list continuation
git-commit-graph.txt: fix list rendering
git-commit-graph.txt: fix grammo
date-formats.txt: fix list continuation
* https://github.com/prati0100/git-gui:
git-gui: Handle Ctrl + BS/Del in the commit msg
Subject: git-gui: fix syntax error because of missing semicolon
Allow deleting words backwards and forwards using Ctrl + Backspace and
Delete in the commit message buffer.
* il/ctrl-bs-del:
git-gui: Handle Ctrl + BS/Del in the commit msg