"git check-ref-format --branch @{-1}" bit a "BUG()" when run
outside a repository for obvious reasons; clarify the documentation
and make sure we do not even try to expand the at-mark magic in
such a case, but still call the validation logic for branch names.
* jc/check-ref-format-oor:
check-ref-format doc: --branch validates and expands <branch>
check-ref-format --branch: strip refs/heads/ using skip_prefix
check-ref-format --branch: do not expand @{...} outside repository
Running "git check-ref-format --branch @{-1}" from outside any
repository produces
$ git check-ref-format --branch @{-1}
BUG: environment.c:182: git environment hasn't been setup
This is because the expansion of @{-1} must come from the HEAD reflog,
which involves opening the repository. @{u} and @{push} (which are
more unusual because they typically would not expand to a local
branch) trigger the same assertion.
This has been broken since day one. Before v2.13.0-rc0~48^2
(setup_git_env: avoid blind fall-back to ".git", 2016-10-02), the
breakage was more subtle: Git would read reflogs from ".git" within
the current directory even if it was not a valid repository. Usually
that is harmless because Git is not being run from the root directory
of an invalid repository, but in edge cases such accesses can be
confusing or harmful. Since v2.13.0, the problem is easier to
diagnose because Git aborts with a BUG message.
Erroring out is the right behavior: when asked to interpret a branch
name like "@{-1}", there is no reasonable answer in this context.
But we should print a message saying so instead of an assertion failure.
We do not forbid "check-ref-format --branch" from outside a repository
altogether because it is ok for a script to pre-process branch
arguments without @{...} in such a context. For example, with
pre-2.13 Git, a script that does
branch='master'; # default value
parse_options
branch=$(git check-ref-format --branch "$branch")
to normalize an optional branch name provided by the user would work
both inside a repository (where the user could provide '@{-1}') and
outside (where '@{-1}' should not be accepted).
So disable the "expand @{...}" half of the feature when run outside a
repository, but keep the check of the syntax of a proposed branch
name. This way, when run from outside a repository, "git
check-ref-format --branch @{-1}" will gracefully fail:
$ git check-ref-format --branch @{-1}
fatal: '@{-1}' is not a valid branch name
and "git check-ref-format --branch master" will succeed as before:
$ git check-ref-format --branch master
master
restoring the usual pre-2.13 behavior.
[jn: split out from a larger patch; moved conditional to
strbuf_check_branch_ref instead of its caller; fleshed out commit
message; some style tweaks in tests]
Reported-by: Marko Kungla <marko.kungla@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A common mistake when writing binary search is to allow possible
integer overflow by using the simple average:
mid = (min + max) / 2;
Instead, use the overflow-safe version:
mid = min + (max - min) / 2;
This translation is safe since the operation occurs inside a loop
conditioned on "min < max". The included changes were found using
the following git grep:
git grep '/ *2;' '*.c'
Making this cleanup will prevent future review friction when a new
binary search is contructed based on existing code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
alloc_packed_git() in packfile.c is duplicated from sha1_file.c. In a
subsequent commit, alloc_packed_git() will be removed from sha1_file.c.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several uses of the constant 40 in find_unique_abbrev_r.
Convert them to GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the flags for get_oid_with_context and friends to use "OID"
instead of "SHA1" in their names.
This transform was made by running the following one-liner on the
affected files:
perl -pi -e 's/GET_SHA1/GET_OID/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert code that divides and rounds up to use DIV_ROUND_UP to make the
intent clearer and reduce the number of magic constants.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimize "what are the object names already taken in an alternate
object database?" query that is used to derive the length of prefix
an object name is uniquely abbreviated to.
* rs/sha1-name-readdir-optim:
sha1_file: guard against invalid loose subdirectory numbers
sha1_file: let for_each_file_in_obj_subdir() handle subdir names
p4205: add perf test script for pretty log formats
sha1_name: cache readdir(3) results in find_short_object_filename()
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
The function for_each_file_in_obj_subdir() takes a object subdirectory
number and expects the name of the same subdirectory to be included in
the path strbuf. Avoid this redundancy by letting the function append
the hexadecimal subdirectory name itself. This makes it a bit easier
and safer to use the function -- it becomes impossible to specify
different subdirectories in subdir_nr and path.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read each loose object subdirectory at most once when looking for unique
abbreviated hashes. This speeds up commands like "git log --pretty=%h"
considerably, which previously caused one readdir(3) call for each
candidate, even for subdirectories that were visited before.
The new cache is kept until the program ends and never invalidated. The
same is already true for pack indexes. The inherent racy nature of
finding unique short hashes makes it still fit for this purpose -- a
conflicting new object may be added at any time. Tasks with higher
consistency requirements should not use it, though.
The cached object names are stored in an oid_array, which is quite
compact. The bitmap for remembering which subdir was already read is
stored as a char array, with one char per directory -- that's not quite
as compact, but really simple and incurs only an overhead equivalent to
11 hashes after all.
Suggested-by: Jeff King <peff@peff.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our code often opens a path to an optional file, to work on its
contents when we can successfully open it. We can ignore a failure
to open if such an optional file does not exist, but we do want to
report a failure in opening for other reasons (e.g. we got an I/O
error, or the file is there, but we lack the permission to open).
The exact errors we need to ignore are ENOENT (obviously) and
ENOTDIR (less obvious). Instead of repeating comparison of errno
with these two constants, introduce a helper function to do so.
* jc/noent-notdir:
treewide: use is_missing_file_error() where ENOENT and ENOTDIR are checked
compat-util: is_missing_file_error()
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
Using the is_missing_file_error() helper introduced in the previous
step, update all hits from
$ git grep -e ENOENT --and -e ENOTDIR
There are codepaths that only check ENOENT, and it is possible that
some of them should be checking both. Updating them is kept out of
this step deliberately, as we do not want to change behaviour in this
step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
When a sha1 lookup returns the tree path via "struct
object_context", it just copies it into a fixed-size buffer.
This means the result can be truncated, and it means our
"struct object_context" consumes a lot of stack space.
Instead, let's allocate a string on the heap. Because most
callers don't care about this information, we'll avoid doing
it by default (so they don't all have to start calling
free() on the result). There are basically two options for
the caller to signal to us that it's interested:
1. By setting a pointer to storage in the object_context.
2. By passing a flag in another parameter.
Doing (1) would match the way that sha1_object_info_extended()
works. But it would mean that every caller would have to
initialize the object_context, which they don't currently
have to do.
This patch does (2), and adds a new bit to the function's
flags field. All of the callers that look at the "path"
field are updated to pass the new flag.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_sha1_with_context() function zeroes out the
oc->symlink_path strbuf, but doesn't use strbuf_init() to
set up the usual invariants (like pointing to the slopbuf).
We don't actually write to the oc->symlink_path strbuf
unless we call get_tree_entry_follow_symlinks(), and that
function does initialize it. However, readers may still look
at the zero'd strbuf.
In practice this isn't a triggerable bug. The only caller
that looks at it only does so when the mode we found is 0.
This doesn't happen for non-tree-entries (where we return
S_IFINVALID). A broken tree entry could have a mode of 0,
but canon_mode() quietly rewrites that into S_IFGITLINK.
So the "0" mode should only come up when we did indeed find
a symlink.
This is mostly just an accident of how the code happens to
work, though. Let's future-proof ourselves to make sure the
strbuf is properly initialized for all calls (it's only a
few struct member assignments, not a heap allocation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An early version of the patch to add object_context used the
name object_resolve_context. This was later shortened to
just object_context, but the "orc" variable name stuck in a
few places. Let's use "oc", which is used elsewhere in the
code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_tag to take a pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a small number of remaining callers of lookup_commit_reference
and lookup_commit_reference_gently that still need to be converted to
struct object_id. Convert these.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's source code assumes that unsigned long is at least as precise as
time_t. Which is incorrect, and causes a lot of problems, in particular
where unsigned long is only 32-bit (notably on Windows, even in 64-bit
versions).
So let's just use a more appropriate data type instead. In preparation
for this, we introduce the new `timestamp_t` data type.
By necessity, this is a very, very large patch, as it has to replace all
timestamps' data type in one go.
As we will use a data type that is not necessarily identical to `time_t`,
we need to be very careful to use `time_t` whenever we interact with the
system functions, and `timestamp_t` everywhere else.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sha1_array_for_each_unique take a callback using struct object_id.
Since one of these callbacks is an argument to for_each_abbrev, convert
those as well. Rename various functions, replacing "sha1" with "oid".
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert this function pointer type and the functions that implement it
to take a struct object_id. Introduce a temporary in
show_ambiguous_object to avoid having to convert for_each_abbrev at this
point.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct disambiguate_state to use struct object_id by changing
the structure definition and applying the following semantic patch:
@@
struct disambiguate_state E1;
@@
- E1.bin_pfx
+ E1.bin_pfx.hash
@@
struct disambiguate_state *E1;
@@
- E1->bin_pfx
+ E1->bin_pfx.hash
@@
struct disambiguate_state E1;
@@
- E1.candidate
+ E1.candidate.hash
@@
struct disambiguate_state *E1;
@@
- E1->candidate
+ E1->candidate.hash
This conversion is needed so we can convert disambiguate_hint_fn later.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the revision parsing logic to match @{upstream}, @{u} & @{push}
case-insensitively.
Before this change supplying anything except the lower-case forms
emits an "unknown revision or path not in the working tree"
error. This change makes upper-case & mixed-case versions equivalent
to the lower-case versions.
The use-case for this is being able to hold the shift key down while
typing @{u} on certain keyboard layouts, which makes the sequence
easier to type, and reduces cases where git throws an error at the
user where it could do what he means instead.
These suffixes now join various other suffixes & special syntax
documented in gitrevisions(7) that matches case-insensitively. A table
showing the status of the various forms documented there before &
after this patch is shown below. The key for the table is:
- CI = Case Insensitive
- CIP = Case Insensitive Possible (without ambiguities)
- AG = Accepts Garbage (.e.g. @{./.4.minutes./.})
Before this change:
|----------------+-----+------+-----|
| What? | CI? | CIP? | AG? |
|----------------+-----+------+-----|
| @{<date>} | Y | Y | Y |
| @{upstream} | N | Y | N |
| @{push} | N | Y | N |
|----------------+-----+------+-----|
After it:
|----------------+-----+------+-----|
| What? | CI? | CIP? | AG? |
|----------------+-----+------+-----|
| @{<date>} | Y | Y | Y |
| @{upstream} | Y | Y | N |
| @{push} | Y | Y | N |
|----------------+-----+------+-----|
The ^{<type>} suffix is not made case-insensitive, because other
places that take <type> like "cat-file -t <type>" do want them case
sensitively (after all we never declared that type names are case
insensitive). Allowing case-insensitive typename only with this syntax
will make the resulting Git as a whole inconsistent.
This change was independently authored to scratch a longtime itch, but
when I was about to submit it I discovered that a similar patch had
been submitted unsuccessfully before by Conrad Irwin in August 2011 as
"rev-parse: Allow @{U} as a synonym for
@{u}" (<1313287071-7851-1-git-send-email-conrad.irwin@gmail.com>).
The tests for this patch are more exhaustive than in the 2011
submission. The starting point for them was to first change the code
to only support upper-case versions of the existing words, seeing what
broke, and amending the breaking tests to check upper case & mixed
case as appropriate, and where not redundant to other similar
tests. The implementation itself is equivalent.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we will likely be introducing a new hash function at some point,
and that hash function might be longer than 20 bytes, use the constant
GIT_MAX_RAWSZ, which is designed to be suitable for allocations, instead
of GIT_SHA1_RAWSZ. This will ease the transition down the line by
distinguishing between places where we need to allocate memory suitable
for the largest hash from those where we need to handle the current
hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we will likely be introducing a new hash function at some point,
and that hash function might be longer than 40 hex characters, use the
constant GIT_MAX_HEXSZ, which is designed to be suitable for
allocations, instead of GIT_SHA1_HEXSZ. This will ease the transition
down the line by distinguishing between places where we need to allocate
memory suitable for the largest hash from those where we need to handle
the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function asks strbuf_branchname() to expand any @-marks
in the branchname, and then we blindly stick refs/heads/ in
front of the result. This is obviously nonsense if the
expansion is "HEAD" or a ref in refs/remotes/.
The most obvious end-user effect is that creating or
renaming a branch with an expansion may have confusing
results (e.g., creating refs/heads/origin/master from
"@{upstream}" when the operation should be disallowed).
We can fix this by telling strbuf_branchname() that we are
only interested in local expansions. Any unexpanded bits are
then fed to check_ref_format(), which either disallows them
(in the case of "@{upstream}") or lets them through
("refs/heads/@" is technically valid, if a bit silly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret_branch_name() function converts names like
@{-1} and @{upstream} into branch names. The expanded ref
names are not fully qualified, and may be outside of the
refs/heads/ namespace (e.g., "@" expands to "HEAD", and
"@{upstream}" is likely to be in "refs/remotes/").
This is OK for callers like dwim_ref() which are primarily
interested in resolving the resulting name, no matter where
it is. But callers like "git branch" treat the result as a
branch name in refs/heads/. When we expand to a ref outside
that namespace, the results are very confusing (e.g., "git
branch @" tries to create refs/heads/HEAD, which is
nonsense).
Callers can't know from the returned string how the
expansion happened (e.g., did the user really ask for a
branch named "HEAD", or did we do a bogus expansion?). One
fix would be to return some out-parameters describing the
types of expansion that occurred. This has the benefit that
the caller can generate precise error messages ("I
understood @{upstream} to mean origin/master, but that is a
remote tracking branch, so you cannot create it as a local
name").
However, out-parameters make the function interface somewhat
cumbersome. Instead, let's do the opposite: let the caller
tell us which elements to expand. That's easier to pass in,
and none of the callers give more precise error messages
than "@{upstream} isn't a valid branch name" anyway (which
should be sufficient).
The strbuf_branchname() function needs a similar parameter,
as most of the callers access interpret_branch_name()
through it.
We can break the callers down into two groups:
1. Callers that are happy with any kind of ref in the
result. We pass "0" here, so they continue to work
without restrictions. This includes merge_name(),
the reflog handling in add_pending_object_with_path(),
and substitute_branch_name(). This last is what powers
dwim_ref().
2. Callers that have funny corner cases (mostly in
git-branch and git-checkout). These need to make use of
the new parameter, but I've left them as "0" in this
patch, and will address them individually in follow-on
patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from strbuf_branchname() is confusing and
useless: it's 0 if the whole name was consumed by an @-mark,
but otherwise is the length of the original name we fed.
No callers actually look at the return value, so let's just
get rid of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally put docstrings with function declarations,
because it's the callers who need to know how the function
works. Let's do so for interpret_branch_name().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interpret_branch_name() function takes a ptr/len pair
for the name, but you can pass "0" for "namelen", which will
cause it to check the length with strlen().
However, before we do that auto-namelen magic, we call
interpret_nth_prior_checkout(), which gets fed the bogus
"0". This was broken by 8cd4249c4 (interpret_branch_name:
always respect "namelen" parameter, 2014-01-15). Though to
be fair to that commit, it was broken in the _opposite_
direction before, where we would always treat "name" as a
string even if a length was passed.
You can see the bug with "git log -g @{-1}". That code path
always passes "0", and without this patch it cannot figure
out which branch's reflog to show.
We can fix it by a small reordering of the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make each_reflog_ent_fn take two struct object_id pointers instead of
two pointers to unsigned char. Convert the various callbacks to use
struct object_id as well. Also, rename fsck_handle_reflog_sha1 to
fsck_handle_reflog_oid.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Overflow is defined for unsigned integers, but not for signed ones.
Wrap around explicitly for the new ring-buffer in find_unique_abbrev()
as we did in bb84735c for the ones in sha1_to_hex() and get_pathname(),
thus avoiding signed overflows and getting rid of the magic number 3.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update "git diff --no-index" codepath not to try to peek into .git/
directory that happens to be under the current directory, when we
know we are operating outside any repository.
* jk/no-looking-at-dotgit-outside-repo:
diff: handle sha1 abbreviations outside of repository
diff_aligned_abbrev: use "struct oid"
diff_unique_abbrev: rename to diff_aligned_abbrev
find_unique_abbrev: use 4-buffer ring
test-*-cache-tree: setup git dir
read info/{attributes,exclude} only when in repository
Updates the way approximate count of total objects is computed
while attempting to come up with a unique abbreviated object name,
which in turn needs to estimate how many hexdigits are necessary to
ensure uniqueness.
* jk/abbrev-auto:
find_unique_abbrev: move logic out of get_short_sha1()
Allow the default abbreviation length, which has historically been
7, to scale as the repository grows. The logic suggests to use 12
hexdigits for the Linux kernel, and 9 to 10 for Git itself.
* lt/abbrev-auto:
abbrev: auto size the default abbreviation
abbrev: prepare for new world order
abbrev: add FALLBACK_DEFAULT_ABBREV to prepare for auto sizing
Some code paths want to format multiple abbreviated sha1s in
the same output line. Because we use a single static buffer
for our return value, they have to either break their output
into several calls or allocate their own arrays and use
find_unique_abbrev_r().
Intead, let's mimic sha1_to_hex() and use a ring of several
buffers, so that the return value stays valid through
multiple calls. This shortens some of the callers, and makes
it harder to for them to make a silly mistake.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Codepaths involved in interacting alternate object store have
been cleaned up.
* jk/alt-odb-cleanup:
alternates: use fspathcmp to detect duplicates
sha1_file: always allow relative paths to alternates
count-objects: report alternates via verbose mode
fill_sha1_file: write into a strbuf
alternates: store scratch buffer as strbuf
fill_sha1_file: write "boring" characters
alternates: use a separate scratch space
alternates: encapsulate alt->base munging
alternates: provide helper for allocating alternate
alternates: provide helper for adding to alternates list
link_alt_odb_entry: refactor string handling
link_alt_odb_entry: handle normalize_path errors
t5613: clarify "too deep" recursion tests
t5613: do not chdir in main process
t5613: whitespace/style cleanups
t5613: use test_must_fail
t5613: drop test_valid_repo function
t5613: drop reachable_via function
