"git rebase", especially when it is run by mistake and ends up
trying to replay many changes, spent long time in silence. The
command has been taught to show progress report when it spends
long time preparing these many changes to replay (which would give
the user a chance to abort with ^C).
* kw/rebase-progress:
rebase: turn on progress option by default for format-patch
format-patch: have progress option while generating patches
"git stash -u" used the contents of the committed version of the
".gitignore" file to decide which paths are ignored, even when the
file has local changes. The command has been taught to instead use
the locally modified contents.
* nm/stash-untracked:
stash: clean untracked files before reset
The "ref-store" code reorganization continues.
* mh/packed-ref-store: (32 commits)
files-backend: cheapen refname_available check when locking refs
packed_ref_store: handle a packed-refs file that is a symlink
read_packed_refs(): die if `packed-refs` contains bogus data
t3210: add some tests of bogus packed-refs file contents
repack_without_refs(): don't lock or unlock the packed refs
commit_packed_refs(): remove call to `packed_refs_unlock()`
clear_packed_ref_cache(): don't protest if the lock is held
packed_refs_unlock(), packed_refs_is_locked(): new functions
packed_refs_lock(): report errors via a `struct strbuf *err`
packed_refs_lock(): function renamed from lock_packed_refs()
commit_packed_refs(): use a staging file separate from the lockfile
commit_packed_refs(): report errors rather than dying
packed_ref_store: make class into a subclass of `ref_store`
packed-backend: new module for handling packed references
packed_read_raw_ref(): new function, replacing `resolve_packed_ref()`
packed_ref_store: support iteration
packed_peel_ref(): new function, extracted from `files_peel_ref()`
repack_without_refs(): take a `packed_ref_store *` parameter
get_packed_ref(): take a `packed_ref_store *` parameter
rollback_packed_refs(): take a `packed_ref_store *` parameter
...
A helper function to read a single whole line into strbuf
mistakenly triggered OOM error at EOF under certain conditions,
which has been fixed.
* rs/strbuf-getwholeline-fix:
strbuf: clear errno before calling getdelim(3)
"git svn" used with "--localtime" option did not compute the tz
offset for the timestamp in question and instead always used the
current time, which has been corrected.
* ur/svn-local-zone:
git svn fetch: Create correct commit timestamp when using --localtime
"git am -s" has been taught that some input may end with a trailer
block that is not Signed-off-by: and it should refrain from adding
an extra blank line before adding a new sign-off in such a case.
* pw/am-signoff:
am: fix signoff when other trailers are present
Code clean-up.
* ma/parse-maybe-bool:
parse_decoration_style: drop unused argument `var`
treewide: deprecate git_config_maybe_bool, use git_parse_maybe_bool
config: make git_{config,parse}_maybe_bool equivalent
config: introduce git_parse_maybe_bool_text
t5334: document that git push --signed=1 does not work
Doc/git-{push,send-pack}: correct --sign= to --signed=
"git clone --recurse-submodules --quiet" did not pass the quiet
option down to submodules.
* bw/clone-recursive-quiet:
clone: teach recursive clones to respect -q
"git grep --recurse-submodules" has been reworked to give a more
consistent output across submodule boundary (and do its thing
without having to fork a separate process).
* bw/grep-recurse-submodules:
grep: recurse in-process using 'struct repository'
submodule: merge repo_read_gitmodules and gitmodules_config
submodule: check for unmerged .gitmodules outside of config parsing
submodule: check for unstaged .gitmodules outside of config parsing
submodule: remove fetch.recursesubmodules from submodule-config parsing
submodule: remove submodule.fetchjobs from submodule-config parsing
config: add config_from_gitmodules
cache.h: add GITMODULES_FILE macro
repository: have the_repository use the_index
repo_read_index: don't discard the index
Commands like "git rebase" accepted the --rerere-autoupdate option
from the command line, but did not always use it. This has been
fixed.
* pw/sequence-rerere-autoupdate:
cherry-pick/revert: reject --rerere-autoupdate when continuing
cherry-pick/revert: remember --rerere-autoupdate
t3504: use test_commit
rebase -i: honor --rerere-autoupdate
rebase: honor --rerere-autoupdate
am: remember --rerere-autoupdate setting
"git push --recurse-submodules $there HEAD:$target" was not
propagated down to the submodules, but now it is.
* bw/push-options-recursively-to-submodules:
submodule--helper: teach push-check to handle HEAD
When locking references in preparation for updating them, we need to
check that none of the newly added references D/F conflict with
existing references (e.g., we don't allow `refs/foo` to be added if
`refs/foo/bar` already exists, or vice versa).
Prior to 524a9fdb51 (refs_verify_refname_available(): use function in
more places, 2017-04-16), conflicts with existing loose references
were checked by looking directly in the filesystem, and then conflicts
with existing packed references were checked by running
`verify_refname_available_dir()` against the packed-refs cache.
But that commit changed the final check to call
`refs_verify_refname_available()` against the *whole* files ref-store,
including both loose and packed references, with the following
comment:
> This means that those callsites now check for conflicts with all
> references rather than just packed refs, but the performance cost
> shouldn't be significant (and will be regained later).
That comment turned out to be too sanguine. User s@kazlauskas.me
reported that fetches involving a very large number of references in
neighboring directories were slowed down by that change.
The problem is that when fetching, each reference is updated
individually, within its own reference transaction. This is done
because some reference updates might succeed even though others fail.
But every time a reference update transaction is finished,
`clear_loose_ref_cache()` is called. So when it is time to update the
next reference, part of the loose ref cache has to be repopulated for
the `refs_verify_refname_available()` call. If the references are all
in neighboring directories, then the cost of repopulating the
reference cache increases with the number of references, resulting in
O(N²) effort.
The comment above also claims that the performance cost "will be
regained later". The idea was that once the packed-refs were finished
being split out into a separate ref-store, we could limit the
`refs_verify_refname_available()` call to the packed references again.
That is what we do now.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git config --bool xxx.yyy` returns `true` for `[xxx]yyy` but
`false` for `[xxx]yyy=` or `[xxx]yyy=""`. This is tested in
t1300-repo-config.sh since 09bc098c2.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the "--progress" option to format-patch when the standard error
stream is connected to the terminal and "--quiet" is not given.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When generating patches for the rebase command, if the user does
not realize the branch they are rebasing onto is thousands of
commits different, there is no progress indication after initial
rewinding message.
The progress meter as presented in this patch assumes the thousands of
patches to have a fine granularity as well as assuming to require all
the same amount of work/time for each, such that a steady progress bar
is achieved.
We do not want to estimate the time for each patch based e.g.
on their size or number of touched files (or parents) as that is too
expensive for just a progress meter.
This patch allows a progress option to be passed to format-patch
so that the user can be informed the progress of generating the
patch. This option is then used by the rebase command when
calling format-patch.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sign-off added should be that of the "committer", not that of the
"commit's author"; that is how the rest of Git adds sign-off using
sequencer.c::append_signoff().
Use the correct logical variable that identifies the committer.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If calling git stash -u on a repo that contains a file that is not
ignored any more due to a current modification of the gitignore file,
this file is stashed but not remove from the working tree.
This is due to git-stash first doing a reset --hard which clears the
.gitignore file modification and the call git clean, leaving the file
untouched.
This causes git stash pop to fail due to the file existing.
This patch simply switches the order between cleaning and resetting
and adds a test for this usecase.
Reported-by: Sam Partington <sam@whiteoctober.co.uk>
Signed-off-by: Nicolas Morey-Chaisemartin <nicolas@morey-chaisemartin.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use read_object() in its place instead. This avoids duplication of code.
This makes force_object_loose() slightly slower (because of a redundant
check of loose object storage), but only in the error case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the setting of oi->whence to sha1_loose_object_info() and
packed_object_info().
This allows sha1_object_info_extended() to not need to know about the
delta base cache. This will be useful during a future refactoring in
which packfile-related functions, including the handling of the delta
base cache, will be moved to a separate file.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Notably, let's declare that we aim to make "git add ''" illegal in
the cycle after this one.
The topic to do so, ex/deprecate-empty-pathspec-as-match-all, has
been cooking in 'next' too long, and will stay there during this
cycle, but not after.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "tag.pager" configuration variable was useless for those who
actually create tag objects, as it interfered with the use of an
editor. A new mechanism has been introduced for commands to enable
pager depending on what operation is being carried out to fix this,
and then "git tag -l" is made to run pager by default.
* ma/pager-per-subcommand-action:
git.c: ignore pager.* when launching builtin as dashed external
tag: change default of `pager.tag` to "on"
tag: respect `pager.tag` in list-mode only
t7006: add tests for how git tag paginates
git.c: provide setup_auto_pager()
git.c: let builtins opt for handling `pager.foo` themselves
builtin.h: take over documentation from api-builtin.txt
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
Because recent Git for Windows do come with a real msgfmt, the
build procedure for git-gui has been updated to use it instead of a
hand-rolled substitute.
* js/git-gui-msgfmt-on-windows:
git-gui (MinGW): make use of MSys2's msgfmt
git gui: allow for a long recentrepo list
git gui: de-dup selected repo from recentrepo history
git gui: cope with duplicates in _get_recentrepo
git-gui: remove duplicate entries from .gitconfig's gui.recentrepo
"git contacts" (in contrib/) now lists the address on the
"Reported-by:" trailer to its output, in addition to those on
S-o-b: and other trailers, to make it easier to notify (and thank)
the original bug reporter.
* eb/contacts-reported-by:
git-contacts: also recognise "Reported-by:"
A recently added test for the "credential-cache" helper revealed
that EOF detection done around the time the connection to the cache
daemon is torn down were flaky. This was fixed by reacting to
ECONNRESET and behaving as if we got an EOF.
* dl/credential-cache-socket-in-xdg-cache:
credential-cache: interpret an ECONNRESET as an EOF
The "rerere-train" script (in contrib/) learned the "--overwrite"
option to allow overwriting existing recorded resolutions.
* rg/rerere-train-overwrite:
contrib/rerere-train: optionally overwrite existing resolutions
