git clone does not complain if a trailing '/' is included in the origin
URL, but doing so causes resolution of a submodule's URL relative to the
superproject to fail. Regardless of whether git is changed to remove the
trailing / before recording the URL, we should avoid this issue in
submodule as existing repositories can have this problem.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes for 1.6.0.1
Add hints to revert documentation about other ways to undo changes
Install templates with the user and group of the installing personality
"git-merge": allow fast-forwarding in a stat-dirty tree
completion: find out supported merge strategies correctly
decorate: allow const objects to be decorated
for-each-ref: cope with tags with incomplete lines
diff --check: do not get confused by new blank lines in the middle
remote.c: remove useless if-before-free test
mailinfo: avoid violating strbuf assertion
git format-patch: avoid underrun when format.headers is empty or all NLs
Based on its name, people may read the 'git revert' documentation when
they want to undo local changes, especially people who have used other
SCM's. 'git revert' may not be what they had in mind, but git
provides several other ways to undo changes to files. We can help
them by pointing them towards the git commands that do what they might
want to do.
Cc: Daniel Barkalow <barkalow@iabervon.org>
Cc: Lea Wiemann <lewiemann@gmail.com>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'make install' was run with sufficient privileges, then the installed
templates, which are copied using 'tar', would receive the user and group
of whoever built git. This instructs 'tar' to ignore the user and group
that are recorded in the archive.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to refresh the index to clear stat-dirtyness before a fast-forward
merge. Recent C rewrite forgot to do this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-merge" is a binary executable these days, and looking for assignment
to $all_strategies variable with grep/sed does not work well.
When asked for an unknown strategy, pre-1.6.0 and post-1.6.0 "git merge"
commands respectively say:
$ $HOME/git-snap-v1.5.6.5/bin/git merge -s help
available strategies are: recur recursive octopus resolve stupid ours subtree
$ $HOME/git-snap-v1.6.0/bin/git merge -s help
Could not find merge strategy 'help'.
Available strategies are: recursive octopus resolve ours subtree.
both on their standard error stream. We can use this to learn what
strategies are supported.
The sed script is written in such a way that it catches both old and new
message styles ("Available" vs "available", and the full stop at the end).
It also allows future versions of "git merge" to line-wrap the list of
strategies, and add extra comments, like this:
$ $HOME/git-snap-v1.6.1/bin/git merge -s help
Could not find merge strategy 'help'.
Available strategies are: blame recursive octopus resolve ours
subtree.
Also you have custom strategies: theirs
Make sure you spell strategy names correctly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't actually modify the struct object, so there is no
reason not to accept const versions (and this allows other
callsites, like the next patch, to use the decoration
machinery).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a tag with a single, incomplete line as its payload, asking
git-for-each-ref for its %(body) element accessed a NULL pointer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code remembered that the last diff output it saw was an empty line,
and tried to reset that state whenever it sees a context line, a non-blank
new line, or a new hunk. However, this codepath asks the underlying diff
engine to feed diff without any context, and the "just saw an empty line"
state was not reset if you added a new blank line in the last hunk of your
patch, even if it is not the last line of the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bd/diff-strbuf:
xdiff-interface: hide the whole "xdiff_emit_state" business from the caller
Use strbuf for struct xdiff_emit_state's remainder
Make xdi_diff_outf interface for running xdiff_outf diffs
* dp/hash-literally:
add --no-filters option to git hash-object
add --path option to git hash-object
use parse_options() in git hash-object
correct usage help string for git-hash-object
correct argument checking test for git hash-object
teach index_fd to work with pipes
* rs/imap:
Documentation: Improve documentation for git-imap-send(1)
imap-send.c: more style fixes
imap-send.c: style fixes
git-imap-send: Support SSL
git-imap-send: Allow the program to be run from subdirectories of a git tree
We removed a handful of these useless if-before-free tests several months
ago. This change removes a new one that snuck back in.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In handle_from, we calculate the end boundary of a section
to remove from a strbuf using strcspn like this:
el = strcspn(buf, set_of_end_boundaries);
strbuf_remove(&sb, start, el + 1);
This works fine if "el" is the offset of the boundary
character, meaning we remove up to and including that
character. But if the end boundary didn't match (that is, we
hit the end of the string as the boundary instead) then we
want just "el". Asking for "el+1" caught an out-of-bounds
assertion in the strbuf library.
This manifested itself when we got a 'From' header that had
just an email address with nothing else in it (the end of
the string was the end of the address, rather than, e.g., a
trailing '>' character), causing git-mailinfo to barf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GNU diff's --suppress-blank-empty option makes it so that diff no
longer outputs trailing white space unless the input data has it.
With this option, empty context lines are now empty also in diff -u output.
Before, they would have a single trailing space.
* diff.c (diff_suppress_blank_empty): New global.
(git_diff_basic_config): Set it.
(fn_out_consume): Honor it.
* t/t4029-diff-trailing-space.sh: New file.
* Documentation/config.txt: Document it.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* builtin-log.c (add_header): Avoid a buffer underrun when
format.headers is empty or all newlines. Reproduce with this:
git config format.headers '' && git format-patch -1
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some old platforms have an old diff which doesn't have the -U option.
'git diff' can be used in its place. Adjust the comparison function to
strip git's additional header lines to make this possible.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit fc2ded5b08.
As we do not need the member in struct stat, we do not need to have a
custom "struct mingw_stat" anymore.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some platforms do not have st_blocks member in "struct stat"; mingw
already emulates it by rounding it up to closest 512-byte blocks (even
though it could overcount when a file has holes).
The reason to use the member is only to figure out how many kilobytes the
files occupy on-disk, so give a helper function in git-compat-util.h to
compute this value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Johannes Sixt <johannes.sixt@telecom.at>
Recent changes to is_multipart_boundary() caused git-mailinfo to segfault.
The reason was after handling the end of the boundary the code tried to look
for another boundary. Because the boundary list was empty, dereferencing
the pointer to the top of the boundary caused the program to go boom.
The fix is to check to see if the list is empty and if so go on its merry
way instead of looking for another boundary.
I also fixed a couple of increments and decrements that didn't look correct
relating to content_top.
The boundary test case was updated to catch future problems like this again.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/p4:
Utilise our new p4_read_pipe and p4_write_pipe wrappers
Add p4 read_pipe and write_pipe wrappers
Put in the two other configuration elements found in the source
Put some documentation in about the parameters that have been added
Move git-p4.syncFromOrigin into a configuration parameters section
Consistently use 'git-p4' for the configuration entries
If the user has configured various parameters, use them.
Switch to using 'p4_build_cmd'
If we are in verbose mode, output what we are about to run (or return)
Add a single command that will be used to construct the 'p4' command
Utilise the new 'p4_system' function.
Have a command that specifically invokes 'p4' (via system)
Utilise the new 'p4_read_pipe_lines' command
Create a specific version of the read_pipe_lines command for p4 invocations
Conflicts:
contrib/fast-import/git-p4
P4 on Windows expects the PWD environment variable to be set to the
current working dir, but os.chdir in python doesn't do so.
Signed-off-by: Robert Blum <rob.blum@gmail.com>
Acked-by: Simon Hausmann <simon@lst.de>
Acked-by: Han-Wen Nienhuys <hanwen@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase" without arguments on initial startup showed:
fatal: Needed a single revision
invalid upstream
This patch makes it show the ordinary usage string.
If .git/rebase-merge or .git/rebase-apply/rebasing exists, git-rebase
will die with a message saying that a rebase is in progress and the user
should try --skip/--abort/--continue.
If .git/rebase-apply/applying exists, git-rebase will die with a message
saying that git-am is in progress, regardless how many arguments are
given.
If no arguments are given and .git/rebase-apply/ exists, but neither a
rebasing nor applying file is in that directory, git-rebase dies with a
message saying that rebase-apply exists and no arguments were given.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will ensure that the API at large is accessible to nearly
all Perl versions, while only the temp file caching API is tied to
the File::Temp and File::Spec modules being available.
Signed-off-by: Marcus Griep <marcus@griep.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was already documented in RelNotes-1.6.0, but not in the git-config
manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash -h" showed some incomplete and ugly usage information.
For example, the useful "--keep-index" option for "save" or the "--index"
option for "apply" were not shown. Also in the documentation synopsis they
were not shown, so that there is no incentive to scroll down and even see
that such options exist.
This patch improves the git-stash synopsis in the documentation by
mentioning that further options to the stash commands and then copies
this synopsis to the usage information string of git-stash.sh.
For the latter, the dashless git command string has to be inserted on the
second and the following usage lines. The code of this is taken from
git-sh-setup so that all lines will show the command string.
Note that the "create" command is not advertised at all now, because
it was not mentioned in git-stash.txt.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On platforms with $X, make removes any leftover scripts 'a' from
earlier builds if a new binary 'a.exe' is now built. However, on
cygwin 1.7.0, 'git' and 'git.exe' now consistently name the same file.
Test for file equality before attempting a remove, in order to avoid
nuking just-built binaries.
Signed-off-by: Eric Blake <ebb9@byu.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-apply documentation says that --binary is a historical option.
This patch lets git-am ignore --binary and removes advertisements of this
option.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git allows access to the gitattributes man page via `git help attributes`,
but this is not discoverable via the bash-completion mechanism. This
patch adds all current non-command man pages to the completion candidate
list.
Signed-off-by: Marcus Griep <marcus@griep.us>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use square brackets instead.
And the prominent example of the deficiency are, as usual, the filesystems
of Microsoft house.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two additional wrappers to cover 3 places where we utilise p4 in piped
form. Found by Tor Arvid Lund.
Signed-off-by: Anand Kumria <wildfire@progsoc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --tool= long option to "git mergetool" can be completed with:
kdiff3 tkdiff meld xxdiff emerge
vimdiff gvimdiff ecmerge opendiff
Signed-off-by: Lee Marlow <lee.marlow@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
