Bug was: gitk would overwrite the botwidth setting in .gitk with
a nonsense value when not using tk themes. Moving the affected
line within the conditional results in the expected behavior.
Signed-off-by: Eric Huber <echuber2@illinois.edu>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
gitk applies submodule highlighting (coloring lines starting with
" >" and " <") when `currdiffsubmod` is not an empty string.
However, it fails to reset `currdiffsubmod` after a submodule diff
ends, so any file diffs following a submodule diff will still be
highlighted as if they were submodule diffs.
There are two problems with the way gitk tries to reset `currdiffsubmod`:
1. The code says `set $currdiffsubmod` instead of `set currdiffsubmod`,
so it actually sets the variable whose name is the submodule path
instead.
2. It tries to do it after the first line in a submodule diff, which
is incorrect, since submodule diffs can contain multiple lines.
Fix this by resetting `currdiffsubmod` when a file diff starts.
Signed-off-by: Роман Донченко <dpb@corrigendum.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
After "git checkout -b '漢字'" to create a branch with UTF-8
character in it, "gitk" shows the branch name incorrectly, as it
forgets to turn the bytes read from the "git show-ref" command
into Unicode characters.
Signed-off-by: Kazuhiro Kato <kato-k@ksysllc.co.jp>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Now that the commit reference format has a canonical name, let's use this
name in gitk's UI and implementation.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
[dl: based the patch on gitk's tree]
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When running make from a clean environment, all of the *.po files should
be converted into *.msg files. After that, when make is run without any
changes, make should not do anything.
After beffae768a (gitk: Add Chinese (zh_CN) translation, 2017-03-11),
zh_CN.po was introduced. When make was run, a zh_cn.msg file was
generated (notice the lowercase). However, since make is case-sensitive,
it expects zh_CN.po to generate a zh_CN.msg file so make will keep
reattempting to generate a zh_CN.msg so successive make invocations
result in
Generating catalog po/zh_cn.msg
msgfmt --statistics --tcl po/zh_cn.po -l zh_cn -d po/
317 translated messages.
happening continuously.
Rename zh_CN.po to zh_cn.po so that when make generates the zh_cn.msg
file, it will realize that it was successfully generated and only run
once.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unchanged lines are prefixed with a white-space, thus unchanged lines
starting with either " <" or " >" are mistaken for submodule changes.
Check if a line starts with either " <" or " >" only if we are listing
the changes of a submodule.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Makes it easier to see which refs are local and which refs are remote.
Adds consistency with the remote background colour in the graph display.
Signed-off-by: Paul Wise <pabs3@bonedaddy.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This makes gitk look for http or https URLs in the commit description
and make the URLs clickable. Clicking on them will invoke an external
web browser with the URL.
The web browser command is by default "xdg-open" on Linux, "open" on
MacOS, and "cmd /c start" on Windows. The command can be changed in
the preferences window, and it can include parameters as well as the
command name. If it is set to the empty string then URLs will no
longer be made clickable.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
"make update-po" fails because a previously untranslated string
has now been translated:
Updating po/sv.po
po/sv.po:1388: duplicate message definition...
po/sv.po:380: ...this is the location of the first definition
Remove the duplicate message definition.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
After a reload we might have an entirely different set of commits,
so keeping all of them leaks memory. Remove them all because
re-creating them is not more expensive than testing wether they're
still valid. Lazy (re-)creation is already well established, so
a missing entry can't cause harm.
Signed-off-by: Markus Hitter <mah@jump-ing.de>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
One shouldn't have descriptors of already closed files around.
The first idea to deal with this (previously) ever growing array
was to remove it entirely, but it's needed to detect start of a
new diff with ths old diff not yet done. This happens when a user
clicks on the same commit in the commit list repeatedly without
delay.
Signed-off-by: Markus Hitter <mah@jump-ing.de>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The diff text widget is read-only, so there's zero point in
building an undo stack. This change reduces memory consumption of
this widget by about 95%.
Memory usage of the whole program for viewing a reference commit
before; 579'692'744 bytes, after: 32'724'446 bytes.
Test procedure:
- Choose a largish commit and check it out. In this case one with
90'802 lines, 5'006'902 bytes.
- Have a Tcl version with memory debugging enabled. This is,
build one with --enable-symbols=mem passed to configure.
- Instrument Gitk to regularly show a memory dump. E.g. by adding
these code lines at the very bottom:
proc memDump {} {
catch {
set output [memory info]
puts $output
}
after 3000 memDump
}
memDump
- Start Gitk, it'll load this largish commit into the diff text
field automatically (because it's the current commit).
- Wait until memory consumption levels out and note the numbers.
Note that the numbers reported by [memory info] are much smaller
than the ones reported in 'top' (1.75 GB vs. 105 MB in this case),
likely due to all the instrumentation coming with the debug
version of Tcl.
Signed-off-by: Markus Hitter <mah@jump-ing.de>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When -S or -G is used as a filter option, the resulting commit list
rarely contains all matching commits. Only a certain number of commits
are displayed and the rest are missing.
"git log --boundary -S" does not return as many boundary commits as you
might expect. gitk makes up for this in closevarcs() by adding missing
parent (boundary) commits. However, it does not change $numcommits,
which limits how many commits are shown. In the end, some commits at the
end of the commit list are simply not shown.
Change $numcommits whenever a missing parent is added to the current
view.
Signed-off-by: Stefan Dotterweich <stefandotterweich@gmx.de>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Some systems don't recognize "lime" as a color, leading to errors when
gitk is run. What we want is a bright green, so use "#00ff00" instead.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Force creation of destination bin directory. Without this, gitk
would fail to install if this directory didn't already exist.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Hi,
I made another branch dialog related change, included in this message.
It applies on top of my other two patches.
Rogier.
------- 8< ------------------- 8< --------------
Only the SHA1 was included. It's convenient to have the title
mentioned as well.
Signed-off-by: Rogier Goossens <goossens.rogier@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Git allows checking out remote branches, creating a local tracking
branch in the process. Allow gitk to do this as well, provided a
local branch of the same name does not yet exist.
Signed-off-by: Rogier Goossens <goossens.rogier@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Make Help > About & Key bindings dialogs readable if theme
has changed font color to something incompatible with white.
Signed-off-by: Guillermo S. Romero <gsromero@infernal-iceberg.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The widgets on top of the diff window are very tightly packed. Make
them breathe a little by adding an 'i'-spaced padding between them.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The fonts set in setoptions aren't consistently picked up by ttk, which
uses its own predefined fonts. This is noticeable when switching
between using and not using ttk with custom fonts or in HiDPI settings
(where the default TTK fonts do _not_ respect tk sclaing).
Fix by mapping the ttk fontset to the one used by gitk internally.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Color name "green" was darken since Tcl/Tk 7.6.
Because color name scheme was changed from "X11 colors" to "Web colors".
Use "lime" to keep colors.
See also:
http://www.tcl.tk/cgi-bin/tct/tip/403.html
Signed-off-by: YOKOTA Hiroshi <yokota@netlab.cs.tsukuba.ac.jp>
