Also update SHA-1 after writing. If we do not do that, the second
read_index() will see "initialized" variable already set and not read
.git/index again, which is fine, except istate->sha1 now has a stale
value.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other fill_stat_cache_info() is on new entries, which should set
CE_ENTRY_ADDED in cache_changed, so we're safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache entry additions, removals and modifications are separated
out. The rest of changes are still in the catch-all flag
SOMETHING_CHANGED, which would be more specific later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remove_marked_cache_entries() deletes entries marked with
CE_REMOVE. But if there is no such entry, do not mark the index as
"changed" because that could trigger an index update unnecessarily.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're running out of room for in-memory flags. But since b60e188
(Strip namelen out of ce_flags into a ce_namelen field - 2012-07-11),
we copy the namelen (first 12 bits) to ce_namelen field. So those bits
are free to use. Just make sure we do not accidentally write any
in-memory flags back.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is now only used by write_locked_index(). Move it to
read-cache.c (because read-cache.c will need to be aware of
alternate_index_output later) and unexport it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that some platforms do ship without curl-config even
though they build with the hardcoded default -lcurl and rely on it
to work.
* db/make-with-curl:
Makefile: default to -lcurl when no CURL_CONFIG or CURLDIR
Crash fix for codepath that miscounted the necessary size for an
array when spawning an external diff program.
* 'jk/external-diff-use-argv-array' (early part):
run_external_diff: use an argv_array for the command line
The original implementation of CURL_CONFIG support did not match the
original behavior of using -lcurl when CURLDIR was not set. This broke
implementations that were lacking curl-config but did have libcurl
installed along system libraries, such as MSysGit. In other words, the
assumption that curl-config is always installed was incorrect.
Instead, if CURL_CONFIG is empty or returns an empty result (e.g. due
to curl-config being missing), use the old behavior of falling back to
-lcurl.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A last minute (and hopefully the last) fix to avoid coredumps due
to an incorrect pointer arithmetic.
* jk/pack-bitmap:
ewah_bitmap.c: do not assume size_t and eword_t are the same size
Make sure the marks are not written out when the transport helper
did not finish happily, to avoid leaving a marks file that is out of
sync with the reality.
* fc/transport-helper-sync-error-fix:
t5801 (remote-helpers): cleanup environment sets
transport-helper: fix sync issue on crashes
transport-helper: trivial cleanup
transport-helper: propagate recvline() error pushing
remote-helpers: make recvline return an error
transport-helper: remove barely used xchgline()
Ask curl-config how to link with the curl library, instead of
having only a limited configurability knobs in the Makefile.
* db/make-with-curl:
Makefile: allow static linking against libcurl
Makefile: use curl-config to determine curl flags
When buffer_grow changes the size of the buffer using realloc,
it first computes and saves the rlw pointer's offset into the
buffer using (uint8_t *) math before the realloc but then
restores it using (eword_t *) math.
In order to do this it's necessary to convert the (uint8_t *)
offset into an (eword_t *) offset. It was doing this by
dividing by the sizeof(size_t). Unfortunately sizeof(size_t)
is not same as sizeof(eword_t) on all platforms.
This causes illegal memory accesses and other bad things to
happen when attempting to use bitmaps on those platforms.
Fix this by dividing by the sizeof(eword_t) instead which
will always be correct for all platforms.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jx/i18n:
i18n: mention "TRANSLATORS:" marker in Documentation/CodingGuidelines
i18n: only extract comments marked with "TRANSLATORS:"
i18n: remove obsolete comments for translators in diffstat generation
i18n: fix uncatchable comments for translators in date.c
Work around /bin/sh that does not like "return" at the top-level
of a file that is dot-sourced from inside a function definition.
* km/avoid-non-function-return-in-rebase:
Revert "rebase: fix run_specific_rebase's use of "return" on FreeBSD"
rebase: avoid non-function use of "return" on FreeBSD
* ep/shell-command-substitution:
t9362-mw-to-git-utf8.sh: use the $( ... ) construct for command substitution
t9360-mw-to-git-clone.sh: use the $( ... ) construct for command substitution
git-tag.sh: use the $( ... ) construct for command substitution
git-revert.sh: use the $( ... ) construct for command substitution
git-resolve.sh: use the $( ... ) construct for command substitution
git-repack.sh: use the $( ... ) construct for command substitution
git-merge.sh: use the $( ... ) construct for command substitution
git-ls-remote.sh: use the $( ... ) construct for command substitution
git-fetch.sh: use the $( ... ) construct for command substitution
git-commit.sh: use the $( ... ) construct for command substitution
git-clone.sh: use the $( ... ) construct for command substitution
git-checkout.sh: use the $( ... ) construct for command substitution
install-webdoc.sh: use the $( ... ) construct for command substitution
howto-index.sh: use the $( ... ) construct for command substitution
Commit 512477b (tests: use "env" to run commands with temporary env-var
settings) missed some variables in the remote-helpers test. Also
standardize these.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently generate the command-line for the external
command using a fixed-length array of size 10. But if there
is a rename, we actually need 11 elements (10 items, plus a
NULL), and end up writing a random NULL onto the stack.
Rather than bump the limit, let's just use an argv_array, which
makes this sort of error impossible.
Noticed-by: Max L <infthi.inbox@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn by default puts its Subversion-tracking refs directly in
refs/remotes/*. This runs counter to Git's convention of using
refs/remotes/$remote/* for storing remote-tracking branches.
Furthermore, combining git-svn with regular git remotes run the risk of
clobbering refs under refs/remotes (e.g. if you have a git remote
called "tags" with a "v1" branch, it will overlap with the git-svn's
tracking branch for the "v1" tag from Subversion.
Even though the git-svn refs stored in refs/remotes/* are not "proper"
remote-tracking branches (since they are not covered by a proper git
remote's refspec), they clearly represent a similar concept, and would
benefit from following the same convention.
For example, if git-svn tracks Subversion branch "foo" at
refs/remotes/foo, and you create a local branch refs/heads/foo to add
some commits to be pushed back to Subversion (using "git svn dcommit),
then it is clearly unhelpful of Git to throw
warning: refname 'foo' is ambiguous.
every time you checkout, rebase, or otherwise interact with the branch.
The existing workaround for this is to supply the --prefix=quux/ to
git svn init/clone, so that git-svn's tracking branches end up in
refs/remotes/quux/* instead of refs/remotes/*. However, encouraging
users to specify --prefix to work around a design flaw in git-svn is
suboptimal, and not a long term solution to the problem. Instead,
git-svn should default to use a non-empty prefix that saves
unsuspecting users from the inconveniences described above.
This patch will only affect newly created git-svn setups, as the
--prefix option only applies to git svn init (and git svn clone).
Existing git-svn setups will continue with their existing (lack of)
prefix. Also, if anyone somehow prefers git-svn's old layout, they
can recreate that by explicitly passing an empty prefix (--prefix "")
on the git svn init/clone command line.
The patch changes the default value for --prefix from "" to "origin/",
updates the git-svn manual page, and fixes the fallout in the git-svn
testcases.
(Note that this patch might be easier to review using the --word-diff
and --word-diff-regex=. diff options.)
[ew: squashed description of <= 1.9 behavior into manpage]
Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* fc/remote-helper-fixes:
remote-bzr: trivial test fix
remote-bzr: include authors field in pushed commits
remote-bzr: add support for older versions
remote-hg: always normalize paths
remote-helpers: allow all tests running from any dir
These comments have to have "TRANSLATORS: " at the very beginning
and have to deviate from the usual multi-line comment formatting
convention.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
