The hashwrite() method takes an input buffer and updates a hashfile's
hash function while writing the data to a file. To avoid overuse of
flushes, the hashfile has an internal buffer and most writes will use
memcpy() to transfer data from the input 'buf' to the hashfile's buffer
of size 8 * 1024 bytes.
Logic introduced by a8032d12 (sha1write: don't copy full sized buffers,
2008-09-02) reduces the number of memcpy() calls when the input buffer
is sufficiently longer than the hashfile's buffer, causing nr to be the
length of the full buffer. In these cases, the input buffer is used
directly in chunks equal to the hashfile's buffer size.
This method caught my attention while investigating some performance
issues, but it turns out that these performance issues were noise within
the variance of the experiment.
However, during this investigation, I inspected hashwrite() and
misunderstood it, even after looking closely and trying to make it
faster. This change simply reorganizes some parts of the loop within
hashwrite() to make it clear that each batch either uses memcpy() to the
hashfile's buffer or writes directly from the input buffer. The previous
code relied on indirection through local variables and essentially
inlined the implementation of hashflush() to reduce lines of code.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff-index" codepath has been taught to trust fsmonitor status
to reduce number of lstat() calls.
* nk/diff-index-fsmonitor:
fsmonitor: add perf test for git diff HEAD
fsmonitor: add assertion that fsmonitor is valid to check_removed
fsmonitor: skip lstat deletion check during git diff-index
GIT_TEST_FAIL_PREREQS is a mechanism to skip test pieces with
prerequisites to catch broken tests that depend on the side effects
of optional pieces, but did not work at all when negative
prerequisites were involved.
* jk/fail-prereq-testfix:
t: annotate !PTHREADS tests with !FAIL_PREREQS
"git repack" so far has been only capable of repacking everything
under the sun into a single pack (or split by size). A cleverer
strategy to reduce the cost of repacking a repository has been
introduced.
* tb/geometric-repack:
builtin/pack-objects.c: ignore missing links with --stdin-packs
builtin/repack.c: reword comment around pack-objects flags
builtin/repack.c: be more conservative with unsigned overflows
builtin/repack.c: assign pack split later
t7703: test --geometric repack with loose objects
builtin/repack.c: do not repack single packs with --geometric
builtin/repack.c: add '--geometric' option
packfile: add kept-pack cache for find_kept_pack_entry()
builtin/pack-objects.c: rewrite honor-pack-keep logic
p5303: measure time to repack with keep
p5303: add missing &&-chains
builtin/pack-objects.c: add '--stdin-packs' option
revision: learn '--no-kept-objects'
packfile: introduce 'find_kept_pack_entry()'
As record_reused_object(offset, offset - hashfile_total(out)) said,
reused_chunk.difference should be the offset of original packfile minus
the offset of the generated packfile. But the comment presented an opposite way.
Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text says something called a "patch" is prepared one for each
commit, it is suitable for e-mail submission, and "am" is the
command to use it, but does not say what the "patch" really is.
The description in the page also refers to the "three-dash" line,
but it is unclear what it is, unless the reader is given a more
detailed overview of what the "patch" is.
Add a brief paragraph to give an overview of what the output looks
like.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The completion for 'git stash' has not changed in a major way since it
was converted from shell script to builtin. Now that it's a builtin, we
can take advantage of the groundwork laid out by parse-options and use
the generated options.
Rewrite _git_stash() to take use __gitcomp_builtin() to generate
completions for subcommands.
The main `git stash` command does not take any arguments directly. If no
subcommand is given, it automatically defaults to `git stash push`. This
means that we can simplify the logic for when no subcommands have been
given yet. We only have to offer subcommand completions when we're
completing a non-option after "stash".
One area that this patch could improve upon is that the `git stash list`
command accepts log-options. It would be nice if the completion for this
were unified with that of _git_log() and _git_show() which would allow
completions to be provided for options such as `--pretty` but that is
outside the scope of this patch.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To save a level of indentation, perform an early return in the "if" arm
so we can move the "else" code out of the block.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many completion functions perform hardcoded comparisons with $cword.
This fails in the case where the main git command is given arguments
(e.g. `git -C . bundle<TAB>` would fail to complete its subcommands).
Even _git_worktree(), which uses __git_find_on_cmdline(), could still
fail. With something like `git -C add worktree move<TAB>`, the
subcommand would be incorrectly identified as "add" instead of "move".
Assign $__git_subcommand_idx in __git_main(), where the git subcommand
is actually found and the corresponding completion function is called.
Use this variable to replace hardcoded comparisons with $cword.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a stray "xb" I inadvertently introduced in 780aa0a21e (tests:
remove last uses of GIT_TEST_GETTEXT_POISON=false, 2021-02-11).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get-send-email currently makes the assumption that the
'sendemail-validate' hook exists inside of the repository.
Since the introduction of 'core.hooksPath' configuration option in
867ad08a26 (hooks: allow customizing where the hook directory is,
2016-05-04), this is no longer true.
Instead of assuming a hardcoded repo relative path, query
git for the actual path of the hooks directory.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the rebase.useBuiltin setting and the now-obsolete
GIT_TEST_REBASE_USE_BUILTIN test flag.
This was left in place after my d03ebd411c (rebase: remove the
rebase.useBuiltin setting, 2019-03-18) to help anyone who'd used the
experimental flag and wanted to know that it was the default, or that
they should transition their test environment to use the builtin
rebase unconditionally.
It's been more than long enough for those users to get a headsup about
this. So remove all the scaffolding that was left inplace after
d03ebd411c. I'm also removing the documentation entry, if anyone
still has this left in their configuration they can do some source
archaeology to figure out what it used to do, which makes more sense
than exposing every git user reading the documentation to this legacy
configuration switch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `-v<n>` option of `format-patch` can give nothing but an
integral iteration number to patches in a series. Some people,
however, prefer to mark a new iteration with only a small fixup
with a non integral iteration number (e.g. an "oops, that was
wrong" fix-up patch for v4 iteration may be labeled as "v4.1").
Allow `format-patch` to take such a non-integral iteration
number.
`<n>` can be any string, such as '3.1' or '4rev2'. In the case
where it is a non-integral value, the "Range-diff" and "Interdiff"
headers will not include the previous version.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parallel checkout machinery will call checkout_entry() for entries
that could not be written in parallel due to path collisions. At this
point, we will already be holding the conversion attributes for each
entry, and it would be wasteful to let checkout_entry() load these
again. Instead, let's add the checkout_entry_ca() variant, which
optionally takes a preloaded conv_attrs struct.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a following patch, checkout_entry() will use conv_attrs to decide
whether an entry should be enqueued for parallel checkout or not. But
the attributes lookup only happens lower in this call stack. To avoid
the unnecessary work of loading the attributes twice, let's move it up
to checkout_entry(), and pass the loaded struct down to write_entry().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code that updates the in-memory index information after an entry is
written currently resides in write_entry(). Extract it to a public
function so that it can be called by the parallel checkout functions,
outside entry.c, in a later patch.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two functions will be used by the parallel checkout code, so let's
make them public. Note: fstat_output() is renamed to
fstat_checkout_output(), now that it has become public, seeking to avoid
future name collisions.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The declarations of entry.c's public functions and structures currently
reside in cache.h. Although not many, they contribute to the size of
cache.h and, when changed, cause the unnecessary recompilation of
modules that don't really use these functions. So let's move them to a
new entry.h header. While at it let's also move a comment related to
checkout_entry() from entry.c to entry.h as it's more useful to describe
the function there.
Original-patch-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, Git has supported the 'Signed-off-by' commit trailer
using the '--signoff' and the '-s' option from the command line.
But users may need to provide other trailer information from the
command line such as "Helped-by", "Reported-by", "Mentored-by",
Now implement a new `--trailer <token>[(=|:)<value>]` option to pass
other trailers to `interpret-trailers` and insert them into commit
messages.
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git -c core.bare=false clone --bare ..." would have segfaulted,
which has been corrected.
* bc/clone-bare-with-conflicting-config:
builtin/init-db: handle bare clones when core.bare set to false
"git log --format='...'" learned "%(describe)" placeholder.
* rs/pretty-describe:
archive: expand only a single %(describe) per archive
pretty: document multiple %(describe) being inconsistent
t4205: assert %(describe) test coverage
pretty: add merge and exclude options to %(describe)
pretty: add %(describe)
"git stash show" learned to optionally show untracked part of the
stash.
* dl/stash-show-untracked:
stash show: learn stash.showIncludeUntracked
stash show: teach --include-untracked and --only-untracked
Rename detection rework continues.
* en/ort-perf-batch-8:
diffcore-rename: compute dir_rename_guess from dir_rename_counts
diffcore-rename: limit dir_rename_counts computation to relevant dirs
diffcore-rename: compute dir_rename_counts in stages
diffcore-rename: extend cleanup_dir_rename_info()
diffcore-rename: move dir_rename_counts into dir_rename_info struct
diffcore-rename: add function for clearing dir_rename_count
Move computation of dir_rename_count from merge-ort to diffcore-rename
diffcore-rename: add a mapping of destination names to their indices
diffcore-rename: provide basic implementation of idx_possible_rename()
diffcore-rename: use directory rename guided basename comparisons
Updates to memory allocation code around the use of pcre2 library.
* ab/grep-pcre2-allocfix:
grep/pcre2: move definitions of pcre2_{malloc,free}
grep/pcre2: move back to thread-only PCREv2 structures
grep/pcre2: actually make pcre2 use custom allocator
grep/pcre2: use pcre2_maketables_free() function
grep/pcre2: use compile-time PCREv2 version test
grep/pcre2: add GREP_PCRE2_DEBUG_MALLOC debug mode
grep/pcre2: prepare to add debugging to pcre2_malloc()
grep/pcre2: correct reference to grep_init() in comment
grep/pcre2: drop needless assignment to NULL
grep/pcre2: drop needless assignment + assert() on opt->pcre2
Perf test update to work better in secondary worktrees.
* jk/perf-in-worktrees:
t/perf: avoid copying worktree files from test repo
t/perf: handle worktrees as test repos
A new configuration variable has been introduced to allow choosing
which version of the generation number gets used in the
commit-graph file.
* ds/commit-graph-generation-config:
commit-graph: use config to specify generation type
commit-graph: create local repository pointer
Update C code that sets a few configuration variables when a remote
is configured so that it spells configuration variable names in the
canonical camelCase.
* ab/remote-write-config-in-camel-case:
remote: write camel-cased *.pushRemote on rename
remote: add camel-cased *.tagOpt key, like clone
We had a code to diagnose and die cleanly when a required
clean/smudge filter is missing, but an assert before that
unnecessarily fired, hiding the end-user facing die() message.
* mt/cleanly-die-upon-missing-required-filter:
convert: fail gracefully upon missing clean cmd on required filter
It does not make sense to make ".gitattributes", ".gitignore" and
".mailmap" symlinks, as they are supposed to be usable from the
object store (think: bare repositories where HEAD:.mailmap etc. are
used). When these files are symbolic links, we used to read the
contents of the files pointed by them by mistake, which has been
corrected.
* jk/open-dotgitx-with-nofollow:
mailmap: do not respect symlinks for in-tree .mailmap
exclude: do not respect symlinks for in-tree .gitignore
attr: do not respect symlinks for in-tree .gitattributes
exclude: add flags parameter to add_patterns()
attr: convert "macro_ok" into a flags field
add open_nofollow() helper
When "git diff --no-index X Y" is run the modes of the files being
differ are normalized by canon_mode() in fill_filespec().
I recently broke that behavior in a patch of mine[1] which would pass
all tests, or not, depending on the umask of the git.git checkout.
Let's test for this explicitly. Arguably this should not be the
behavior of "git diff --no-index". We aren't diffing our own objects
or the index, so it might be useful to show mode differences between
files.
On the other hand diff(1) does not do that, and it would be needlessly
distracting when e.g. diffing an extracted tar archive whose contents
is the same, but whose file modes are different.
1. https://lore.kernel.org/git/20210316155829.31242-2-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When preparing the bitmap walk, we first establish the set of of have
and want objects by iterating over the set of pending objects: if an
object is marked as uninteresting, it's declared as an object we already
have, otherwise as an object we want. These two sets are then used to
compute which transitively referenced objects we need to obtain.
One special case here are tag objects: when a tag is requested, we
resolve it to its first not-tag object and add both resolved objects as
well as the tag itself into either the have or want set. Given that the
uninteresting-property always propagates to referenced objects, it is
clear that if the tag is uninteresting, so are its children and vice
versa. But we fail to propagate the flag, which effectively means that
referenced objects will always be interesting except for the case where
they have already been marked as uninteresting explicitly.
This mislabeling does not impact correctness: we now have it in our
"wants" set, and given that we later do an `AND NOT` of the bitmaps of
"wants" and "haves" sets it is clear that the result must be the same.
But we now start to needlessly traverse the tag's referenced objects in
case it is uninteresting, even though we know that each referenced
object will be uninteresting anyway. In the worst case, this can lead to
a complete graph walk just to establish that we do not care for any
object.
Fix the issue by propagating the `UNINTERESTING` flag to pointees of tag
objects and add a benchmark with negative revisions to p5310. This shows
some nice performance benefits, tested with linux.git:
Test HEAD~ HEAD
---------------------------------------------------------------------------------------------------------------
5310.3: repack to disk 193.18(181.46+16.42) 194.61(183.41+15.83) +0.7%
5310.4: simulated clone 25.93(24.88+1.05) 25.81(24.73+1.08) -0.5%
5310.5: simulated fetch 2.64(5.30+0.69) 2.59(5.16+0.65) -1.9%
5310.6: pack to file (bitmap) 58.75(57.56+6.30) 58.29(57.61+5.73) -0.8%
5310.7: rev-list (commits) 1.45(1.18+0.26) 1.46(1.22+0.24) +0.7%
5310.8: rev-list (objects) 15.35(14.22+1.13) 15.30(14.23+1.07) -0.3%
5310.9: rev-list with tag negated via --not --all (objects) 22.49(20.93+1.56) 0.11(0.09+0.01) -99.5%
5310.10: rev-list with negative tag (objects) 0.61(0.44+0.16) 0.51(0.35+0.16) -16.4%
5310.11: rev-list count with blob:none 12.15(11.19+0.96) 12.18(11.19+0.99) +0.2%
5310.12: rev-list count with blob:limit=1k 17.77(15.71+2.06) 17.75(15.63+2.12) -0.1%
5310.13: rev-list count with tree:0 1.69(1.31+0.38) 1.68(1.28+0.39) -0.6%
5310.14: simulated partial clone 20.14(19.15+0.98) 19.98(18.93+1.05) -0.8%
5310.16: clone (partial bitmap) 12.78(13.89+1.07) 12.72(13.99+1.01) -0.5%
5310.17: pack to file (partial bitmap) 42.07(45.44+2.72) 41.44(44.66+2.80) -1.5%
5310.18: rev-list with tree filter (partial bitmap) 0.44(0.29+0.15) 0.46(0.32+0.14) +4.5%
While most benchmarks are probably in the range of noise, the newly
added 5310.9 and 5310.10 benchmarks consistenly perform better.
Signed-off-by: Patrick Steinhardt <ps@pks.im>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the username and password are supplied in a url like this
https://myuser:secret@git.exampe/myrepo.git and the server supports the
negotiate authenticaten method, git does not fall back to basic auth and
libcurl hardly tries to authenticate with the negotiate method.
Stop using the Negotiate authentication method after the first failure
because if it fails on the first try it will never succeed.
Signed-off-by: Christopher Schenk <christopher@cschenk.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create t0052-simple-ipc.sh with unit tests for the "simple-ipc" mechanism.
Create t/helper/test-simple-ipc test tool to exercise the "simple-ipc"
functions.
When the tool is invoked with "run-daemon", it runs a server to listen
for "simple-ipc" connections on a test socket or named pipe and
responds to a set of commands to exercise/stress the communication
setup.
When the tool is invoked with "start-daemon", it spawns a "run-daemon"
command in the background and waits for the server to become ready
before exiting. (This helps make unit tests in t0052 more predictable
and avoids the need for arbitrary sleeps in the test script.)
The tool also has a series of client "send" commands to send commands
and data to a server instance.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create Unix domain socket based implementation of "simple-ipc".
A set of `ipc_client` routines implement a client library to connect
to an `ipc_server` over a Unix domain socket, send a simple request,
and receive a single response. Clients use blocking IO on the socket.
A set of `ipc_server` routines implement a thread pool to listen for
and concurrently service client connections.
The server creates a new Unix domain socket at a known location. If a
socket already exists with that name, the server tries to determine if
another server is already listening on the socket or if the socket is
dead. If socket is busy, the server exits with an error rather than
stealing the socket. If the socket is dead, the server creates a new
one and starts up.
If while running, the server detects that its socket has been stolen
by another server, it automatically exits.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for --exit-code working with --no-index. There's no reason
to suppose it wouldn't, but we weren't testing for it anywhere in our
tests. Let's fix that blind spot.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
transport_get_remote_refs() can populate the transport struct's
remote_refs. transport_disconnect() is already responsible for most of
transport's cleanup - therefore we also take care of freeing remote_refs
there.
There are 2 locations where transport_disconnect() is called before
we're done using the returned remote_refs. This patch changes those
callsites to only call transport_disconnect() after the returned refs
are no longer being used - which is necessary to safely be able to
free remote_refs during transport_disconnect().
This commit fixes the following leak which was found while running
t0000, but is expected to also fix the same pattern of leak in all
locations that use transport_get_remote_refs():
Direct leak of 165 byte(s) in 1 object(s) allocated from:
#0 0x49a6b2 in calloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x9a72f2 in xcalloc /home/ahunt/oss-fuzz/git/wrapper.c:140:8
#2 0x8ce203 in alloc_ref_with_prefix /home/ahunt/oss-fuzz/git/remote.c:867:20
#3 0x8ce1a2 in alloc_ref /home/ahunt/oss-fuzz/git/remote.c:875:9
#4 0x72f63e in process_ref_v2 /home/ahunt/oss-fuzz/git/connect.c:426:8
#5 0x72f21a in get_remote_refs /home/ahunt/oss-fuzz/git/connect.c:525:8
#6 0x979ab7 in handshake /home/ahunt/oss-fuzz/git/transport.c:305:4
#7 0x97872d in get_refs_via_connect /home/ahunt/oss-fuzz/git/transport.c:339:9
#8 0x9774b5 in transport_get_remote_refs /home/ahunt/oss-fuzz/git/transport.c:1388:4
#9 0x51cf80 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:1271:9
#10 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#11 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#12 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#13 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#14 0x69c45e in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#15 0x7f6a459d5349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
preprocess_options() allocates new strings for help messages for
OPTION_ALIAS. Therefore we also need to clean those help messages up
when freeing the returned options.
First introduced in:
7c280589cf (parse-options: teach "git cmd -h" to show alias as alias, 2020-03-16)
The preprocessed options themselves no longer contain any indication
that a given option is/was an alias - therefore we add a new flag to
indicate former aliases. (An alternative approach would be to look back
at the original options to determine which options are aliases - but
that seems like a fragile approach. Or we could even look at the
alias_groups list - which might be less fragile, but would be slower
as it requires nested looping.)
As far as I can tell, parse_options() is only ever used once per
command, and the help messages are small - hence this leak has very
little impact.
This leak was found while running t0001. LSAN output can be found below:
Direct leak of 65 byte(s) in 1 object(s) allocated from:
#0 0x49a859 in realloc /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x9aae36 in xrealloc /home/ahunt/oss-fuzz/git/wrapper.c:126:8
#2 0x939d8d in strbuf_grow /home/ahunt/oss-fuzz/git/strbuf.c:98:2
#3 0x93b936 in strbuf_vaddf /home/ahunt/oss-fuzz/git/strbuf.c:392:3
#4 0x93b7ff in strbuf_addf /home/ahunt/oss-fuzz/git/strbuf.c:333:2
#5 0x86747e in preprocess_options /home/ahunt/oss-fuzz/git/parse-options.c:666:3
#6 0x866ed2 in parse_options /home/ahunt/oss-fuzz/git/parse-options.c:847:17
#7 0x51c4a7 in cmd_clone /home/ahunt/oss-fuzz/git/builtin/clone.c:989:9
#8 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#9 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#10 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#11 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#12 0x69c9fe in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#13 0x7fdac42d4349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because it's easier to read, but also likely to be easier to maintain.
I am making this change because I need to add a new flag in a later
commit.
Also add a trailing comma to the last enum entry to simplify addition of
new flags.
This change was originally suggested by Peff in:
https://public-inbox.org/git/YEZ%2FBWWbpfVwl6nO@coredump.intra.peff.net/
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the signature of read_tree_recursive() to omit the "base",
"baselen" and "stage" arguments. No callers of it use these parameters
for anything anymore.
The last function to call read_tree_recursive() with a non-"" path was
read_tree_recursive() itself, but that was changed in
ffd31f661d (Reimplement read_tree_recursive() using
tree_entry_interesting(), 2011-03-25).
The last user of the "stage" parameter went away in the last commit,
and even that use was mere boilerplate.
So let's remove those and rename the read_tree_recursive() function to
just read_tree(). We had another read_tree() function that I've
refactored away in preceding commits, since all in-tree users read
trees recursively with a callback we can change the name to signify
that this is the norm.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the static read_tree_1() function to read_tree_at(). This
function works just like read_tree_recursive(), except you provide
your own strbuf.
This step doesn't make much sense now, but in follow-up commits I'll
remove the base/baselen/stage arguments to read_tree_recursive(). At
that point an anticipated in-tree user[1] for the old
read_tree_recursive() couldn't provide a path to start the
traversal.
Let's give them a function to do so with an API that makes more sense
for them, by taking a strbuf we should be able to avoid more casting
and/or reallocations in the future.
1. https://lore.kernel.org/git/xmqqft106sok.fsf@gitster.g
Signed-off-by: Junio C Hamano <gitster@pobox.com>
