We want all the cases that don't do anything with a branch first, and
then the rest. That way we will be able to get the branch and die if
there's a problem in the parent function, instead of inside the function
of each mode.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to break when nothing else will be executed.
Will help next patches.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code is duplicated among multiple functions.
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's a safety check to make sure branch->refname isn't different
from branch->merge[0]->src, otherwise we die().
Therefore we always push to branch->refname.
Suggestions-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simply move the code around and remove dead code. In particular the
'!same_remote' conditional is a no-op since that part of the code is the
same_remote leg of the conditional beforehand.
No functional changes.
Suggestions-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to avoid doing unnecessary things and simplify it in further
patches. In particular moving the additional name safety out of
setup_push_upstream() and into setup_push_simple() and thus making both
more straightforward.
The code is copied exactly as-is; no functional changes.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`simple` is the most important mode so move the relevant code to its own
function to make it easier to see what it's doing.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The typical case is what git was designed for: distributed remotes.
It's only the atypical case--fetching and pushing to the same
remote--that we need to keep an eye on.
No functional changes.
Liked-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a corner case bug in "git mv" on case insensitive systems,
which was introduced in 2.29 timeframe.
* tb/git-mv-icase-fix:
git mv foo FOO ; git mv foo bar gave an assert
CALLOC_ARRAY() macro replaces many uses of xcalloc().
* rs/calloc-array:
cocci: allow xcalloc(1, size)
use CALLOC_ARRAY
git-compat-util.h: drop trailing semicolon from macro definition
"git bisect" reimplemented more in C during 2.30 timeframe did not
take an annotated tag as a good/bad endpoint well. This regression
has been corrected.
* jk/bisect-peel-tag-fix:
bisect: peel annotated tags to commits
This patch fixes a bug where git-bisect doesn't handle receiving
annotated tags as "git bisect good <tag>", etc. It's a regression in
27257bc466 (bisect--helper: reimplement `bisect_state` & `bisect_head`
shell functions in C, 2020-10-15).
The original shell code called:
sha=$(git rev-parse --verify "$rev^{commit}") ||
die "$(eval_gettext "Bad rev input: \$rev")"
which will peel the input to a commit (or complain if that's not
possible). But the C code just calls get_oid(), which will yield the oid
of the tag.
The fix is to peel to a commit. The error message here is a little
non-idiomatic for Git (since it starts with a capital). I've mostly left
it, as it matches the other converted messages (like the "Bad rev input"
we print when get_oid() fails), though I did add an indication that it
was the peeling that was the problem. It might be worth taking a pass
through this converted code to modernize some of the error messages.
Note also that the test does a bare "grep" (not i18ngrep) on the
expected "X is the first bad commit" output message. This matches the
rest of the test script.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence, on a case-insensitive file system,
(strictly speeking with core.ignorecase=true)
leads to an assertion failure and leaves .git/index.lock behind.
git init
echo foo >foo
git add foo
git mv foo FOO
git mv foo bar
This regression was introduced in Commit 9b906af657,
"git-mv: improve error message for conflicted file"
The bugfix is to change the "file exist case-insensitive in the index"
into the correct "file exist (case-sensitive) in the index".
This avoids the "assert" later in the code and keeps setting up the
"ce" pointer for ce_stage(ce) done in the next else if.
This fixes
https://github.com/git-for-windows/git/issues/2920
Reported-By: Dan Moseley <Dan.Moseley@microsoft.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The approach to "fsck" the incoming objects in "index-pack" is
attractive for performance reasons (we have them already in core,
inflated and ready to be inspected), but fundamentally cannot be
applied fully when we receive more than one pack stream, as a tree
object in one pack may refer to a blob object in another pack as
".gitmodules", when we want to inspect blobs that are used as
".gitmodules" file, for example. Teach "index-pack" to emit
objects that must be inspected later and check them in the calling
"fetch-pack" process.
* jt/transfer-fsck-across-packs:
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
"git push $there --delete ''" should have been diagnosed as an
error, but instead turned into a matching push, which has been
corrected.
* jc/push-delete-nothing:
push: do not turn --delete '' into a matching push
The "git maintenance register" command had trouble registering bare
repositories, which had been corrected.
* es/maintenance-of-bare-repositories:
maintenance: fix incorrect `maintenance.repo` path with bare repository
Various fixes on "git add --chmod".
* mt/add-chmod-fixes:
add: propagate --chmod errors to exit status
add: mark --chmod error string for translation
add --chmod: don't update index when --dry-run is used
"git rebase --[no-]fork-point" gained a configuration variable
rebase.forkPoint so that users do not have to keep specifying a
non-default setting.
* ah/rebase-no-fork-point-config:
rebase: add a config option for --no-fork-point
"git grep" has been tweaked to be limited to the sparse checkout
paths.
* mt/grep-sparse-checkout:
grep: honor sparse-checkout on working tree searches
"git {diff,log} --{skip,rotate}-to=<path>" allows the user to
discard diff output for early paths or move them to the end of the
output.
* jc/diffcore-rotate:
diff: --{rotate,skip}-to=<path>
The error codepath around the "--temp/--prefix" feature of "git
checkout-index" has been improved.
* mt/checkout-index-corner-cases:
checkout-index: omit entries with no tempname from --temp output
write_entry(): fix misuses of `path` in error messages
If `add` encounters an error while applying the --chmod changes, it
prints a message to stderr, but exits with a success code. This might
have been an oversight, as the command does exit with a non-zero code in
other situations where it cannot (or refuses to) update all of the
requested paths (e.g. when some of the given paths are ignored). So make
the exit behavior more consistent by also propagating --chmod errors to
the exit status.
Note: the test "all statuses changed in folder if . is given" uses paths
added by previous test cases, some of which might be symbolic links.
Because `git add --chmod` will now fail with such paths, this test would
depend on whether all the previous tests were executed, or only some
of them. Avoid that by running the test on a fresh repo with only
regular files.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This error message is intended for humans, so mark it for translation.
Also use error() instead of fprintf(stderr, ...), to make the
corresponding line a bit cleaner, and to display the "error:" prefix,
which helps classifying the nature/severity of the message.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
`git add --chmod` applies the mode changes even when `--dry-run` is
used. Fix that and add some tests for this option combination.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users (myself included) would prefer to have this feature off by
default because it can silently drop commits.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we added a syntax sugar "git push remote --delete <ref>" to
"git push" as a synonym to the canonical "git push remote :<ref>"
syntax at f517f1f2 (builtin-push: add --delete as syntactic sugar
for :foo, 2009-12-30), we weren't careful enough to make sure that
<ref> is not empty.
Blindly rewriting "--delete <ref>" to ":<ref>" means that an empty
string <ref> results in refspec ":", which is the syntax to ask for
"matching" push that does not delete anything.
Worse yet, if there were matching refs that can be fast-forwarded,
they would have been published prematurely, even if the user feels
that they are not ready yet to be pushed out, which would be a real
disaster.
Noticed-by: Tilman Vogel <tilman.vogel@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an error message informs the user about an incorrect command
invocation, it should refer to "arguments", not "parameters".
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The periodic maintenance tasks configured by `git maintenance start`
invoke `git for-each-repo` to run `git maintenance run` on each path
specified by the multi-value global configuration variable
`maintenance.repo`. Because `git for-each-repo` will likely be run
outside of the repositories which require periodic maintenance, it is
mandatory that the repository paths specified by `maintenance.repo` are
absolute.
Unfortunately, however, `git maintenance register` does nothing to
ensure that the paths it assigns to `maintenance.repo` are indeed
absolute, and may in fact -- especially in the case of a bare repository
-- assign a relative path to `maintenance.repo` instead. Fix this
problem by converting all paths to absolute before assigning them to
`maintenance.repo`.
While at it, also fix `git maintenance unregister` to convert paths to
absolute, as well, in order to ensure that it can correctly remove from
`maintenance.repo` a path assigned via `git maintenance register`.
Reported-by: Clement Moyroud <clement.moyroud@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A small memleak in "diff -I<regexp>" has been corrected.
* ab/diff-deferred-free:
diff: plug memory leak from regcomp() on {log,diff} -I
diff: add an API for deferred freeing
Signed commits and tags now allow verification of objects, whose
two object names (one in SHA-1, the other in SHA-256) are both
signed.
* bc/signed-objects-with-both-hashes:
gpg-interface: remove other signature headers before verifying
ref-filter: hoist signature parsing
commit: allow parsing arbitrary buffers with headers
gpg-interface: improve interface for parsing tags
commit: ignore additional signatures when parsing signed commits
ref-filter: switch some uses of unsigned long to size_t
Documentation, code and test clean-up around "git stash".
* dl/stash-cleanup:
stash: declare ref_stash as an array
t3905: use test_cmp() to check file contents
t3905: replace test -s with test_file_not_empty
t3905: remove nested git in command substitution
t3905: move all commands into test cases
t3905: remove spaces after redirect operators
git-stash.txt: be explicit about subcommand options
Teach index-pack to print dangling .gitmodules links after its "keep" or
"pack" line instead of declaring an error, and teach fetch-pack to check
such lines printed.
This allows the tree side of the .gitmodules link to be in one packfile
and the blob side to be in another without failing the fsck check,
because it is now fetch-pack which checks such objects after all
packfiles have been downloaded and indexed (and not index-pack on an
individual packfile, as it is before this commit).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git reflog expire --stale-fix" can be used to repair the reflog by
removing entries that refer to objects that have been pruned away,
but was not careful to tolerate missing objects.
* js/reflog-expire-stale-fix:
reflog expire --stale-fix: be generous about missing objects
"git grep --untracked" is meant to be "let's ALSO find in these
files on the filesystem" when looking for matches in the working
tree files, and does not make any sense if the primary search is
done against the index, or the tree objects. The "--cached" and
"--untracked" options have been marked as mutually incompatible.
* mt/grep-cached-untracked:
grep: error out if --untracked is used with --cached
The "git range-diff" command learned "--(left|right)-only" option
to show only one side of the compared range.
* js/range-diff-one-side-only:
range-diff: offer --left-only/--right-only options
range-diff: move the diffopt initialization down one layer
range-diff: combine all options in a single data structure
range-diff: simplify code spawning `git log`
range-diff: libify the read_patches() function again
range-diff: avoid leaking memory in two error code paths
There are other ways than ".." for a single token to denote a
"commit range", namely "<rev>^!" and "<rev>^-<n>", but "git
range-diff" did not understand them.
* js/range-diff-wo-dotdot:
range-diff(docs): explain how to specify commit ranges
range-diff/format-patch: handle commit ranges other than A..B
range-diff/format-patch: refactor check for commit range
"git clone" tries to locally check out the branch pointed at by
HEAD of the remote repository after it is done, but the protocol
did not convey the information necessary to do so when copying an
empty repository. The protocol v2 learned how to do so.
* jt/clone-unborn-head:
clone: respect remote unborn HEAD
connect, transport: encapsulate arg in struct
ls-refs: report unborn targets of symrefs
Piecemeal of rewrite of "git bisect" in C continues.
* mr/bisect-in-c-4:
bisect--helper: retire `--check-and-set-terms` subcommand
bisect--helper: reimplement `bisect_skip` shell function in C
bisect--helper: retire `--bisect-auto-next` subcommand
bisect--helper: use `res` instead of return in BISECT_RESET case option
bisect--helper: retire `--bisect-write` subcommand
bisect--helper: reimplement `bisect_replay` shell function in C
bisect--helper: reimplement `bisect_log` shell function in C
When `git blame --color-by-age`, the determine_line_heat() is called to
select how to color the output based on the commit's author date. It
uses the get_commit_info() to parse the information into a `commit_info`
structure, however, this is actually unnecessary because the
determine_line_heat() caller also does the same.
Instead, let's change the determine_line_heat() to take a `commit_info`
structure and remove the internal call to get_commit_info() thus
cleaning up and optimizing the code path.
Enabling Git's trace2 API in order to record the execution time for
every call to determine_line_heat() function:
+ trace2_region_enter("blame", "determine_line_heat", the_repository);
determine_line_heat(ent, &default_color);
+ trace2_region_enter("blame", "determine_line_heat", the_repository);
Then, running `git blame` for "kernel/fork.c" in linux.git and summing
all the execution time for every call (around 1.3k calls) resulted in
2.6x faster execution (best out 3):
git built from 328c109303 (The eighth batch, 2021-02-12) = 42ms
git built from 328c109303 + this change = 16ms
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --temp (or --stage=all, which implies --temp), checkout-index
writes a list to stdout associating temporary file names to the entries'
names. But if it fails to write an entry, and the failure happens before
even assigning a temporary filename to that entry, we get an odd output
line. This can be seen when trying to check out a symlink whose blob is
missing:
$ missing_blob=$(git hash-object --stdin </dev/null)
$ git update-index --add --cacheinfo 120000,$missing_blob,foo
$ git checkout-index --temp foo
error: unable to read sha1 file of foo (e69de29bb2)
foo
The 'TAB foo' line is not much useful and it might break scripts that
expect the 'tempname TAB foo' output. So let's omit such entries from
the stdout list (but leaving the error message on stderr).
We could also consider omitting _all_ failed entries from the output
list, but that's probably not a good idea as the associated tempfiles
may have been created even when checkout failed, so scripts may want to
use the output list for cleanup.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the implementation of "git difftool", there is a case where the
user wants to start viewing the diffs at a specific path and
continue on to the rest, optionally wrapping around to the
beginning. Since it is somewhat cumbersome to implement such a
feature as a post-processing step of "git diff" output, let's
support it internally with two new options.
- "git diff --rotate-to=C", when the resulting patch would show
paths A B C D E without the option, would "rotate" the paths to
shows patch to C D E A B instead. It is an error when there is
no patch for C is shown.
- "git diff --skip-to=C" would instead "skip" the paths before C,
and shows patch to C D E. Again, it is an error when there is no
patch for C is shown.
- "git log [-p]" also accepts these two options, but it is not an
error if there is no change to the specified path. Instead, the
set of output paths are rotated or skipped to the specified path
or the first path that sorts after the specified path.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commands are started from a subdirectory, they may have to
compare the path to the subdirectory (called prefix and found out
from $(pwd)) with the tracked paths. On macOS, $(pwd) and
readdir() yield decomposed path, while the tracked paths are
usually normalized to the precomposed form, causing mismatch. This
has been fixed by taking the same approach used to normalize the
command line arguments.
* tb/precompose-prefix-too:
MacOS: precompose_argv_prefix()
