Thanks to b65982b (Optimize "diff-index --cached" using cache-tree,
2009-05-20), resetting with paths is much faster than resetting
without paths. Some timings for the linux-2.6 repo to illustrate this
(best of five, warm cache):
reset reset .
real 0m0.219s 0m0.080s
user 0m0.140s 0m0.040s
sys 0m0.070s 0m0.030s
These two commands should do the same thing, so instead of having the
user type the trailing " ." to get the faster do_diff_cache()-based
implementation, always use it when doing a mixed reset, with or
without paths (so "git reset $rev" would also be faster).
Timing "git reset" shows that it indeed becomes as fast as
"git reset ." after this patch.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users seem to think, knowingly or not, that being on an unborn
branch is like having a commit with an empty tree checked out, but
when run on an unborn branch, "git reset" currently fails with:
fatal: Failed to resolve 'HEAD' as a valid ref.
Instead of making users figure out that they should run
git rm --cached -r .
, let's teach "git reset" without a revision argument, when on an
unborn branch, to behave as if the user asked to reset to an empty
tree. Don't take the analogy with an empty commit too far, though, but
still disallow explictly referring to HEAD in "git reset HEAD".
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Resetting with paths does not update HEAD and there is nothing else
that a commit should be needed for. Relax the argument parsing so only
a tree is required.
The sha1 is only passed to read_from_tree(), which already only
requires a tree.
The "rev" variable we pass to run_add_interactive() will resolve to a
tree. This is fine since interactive_reset only needs the parameter to
be a treeish and doesn't use it for display purposes.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that there is only one caller left to the single-line method
update_index_refresh(), inline it.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By not returning from inside the "if (pathspec)" block, we can let the
pathspec-aware and pathspec-less code share a bit more, making it
easier to make future changes that should affect both cases. This also
highlights the similarity between read_from_tree() and reset_index().
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing a mixed reset without paths, the index is locked, read,
reset, and written back as part of the actual reset operation (in
reset_index()). Then, when showing the list of worktree modifications,
we lock the index again, refresh it, and write it.
Change this so we only write the index once, making "git reset" a
little faster. It does mean that the index lock will be held a little
longer, but the difference is small compared to the time spent
refreshing the index.
There is one minor functional difference: We used to say "Could not
write new index file." if the first write failed, and "Could not
refresh index" if the second write failed. Now, we will only use the
first message.
This speeds up "git reset" a little on the linux-2.6 repo (best of
five, warm cache):
Before After
real 0m0.239s 0m0.214s
user 0m0.160s 0m0.130s
sys 0m0.070s 0m0.080s
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for the/a following patch, move the locking, writing
and committing of the index file out of update_index_refresh(). The
code duplication caused will soon be taken care of. What remains of
update_index_refresh() is just one line, but it is still called from
two places, so let's leave it for now.
In the process, we expose and fix the minor UI bug that makes us print
"Could not refresh index" when we fail to write the index file when
invoked with a pathspec. Copy the error message from the pathspec-less
codepath ("Could not write new index file.").
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final part of cmd_reset() essentially looks like:
if (pathspec) {
...
read_from_tree(...);
} else {
...
reset_index(...);
update_index_refresh(...);
...
}
where read_from_tree() internally also calls
update_index_refresh(). Move the call to update_index_refresh() out of
read_from_tree for symmetry with the 'else' block, making
read_from_tree() and reset_index() closer in functionality.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The switch statement towards the end of reset.c is missing case arms
for KEEP and MERGE for no obvious reason, and soon the only non-empty
case arm will be the one for HARD. So let's proactively replace it by
if-else, which will let us move one if statement out without leaving
funny-looking left-overs.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If writing or committing the new index file fails, we print "Could not
write new index file." followed by "Could not reset index file to
revision $rev.". The first message seems to imply the second, so print
only the first message.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git reset --keep" calls reset_index_file() twice, first doing a
two-way merge to the target revision, updating the index and worktree,
and then resetting the index. After each call, we write the index
file.
In the unlikely event that the second call to reset_index_file()
fails, the index will have been merged to the target revision, but
HEAD will not be updated, leaving the user with a dirty index.
By moving the locking, writing and committing out of
reset_index_file() and into the caller, we can avoid writing the index
twice, thereby making the sure we don't end up in the half-way reset
state. As a bonus, we speed up "git reset --keep" a little on the
linux-2.6 repo (best of five, warm cache):
Before After
real 0m0.315s 0m0.296s
user 0m0.290s 0m0.280s
sys 0m0.020s 0m0.010s
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a single condition to guard the call to die_if_unmerged_cache for
both --soft and --keep. This avoids the small distraction of the
precondition check from the logic following it.
Also change an instance of
if (e)
err = err || f();
to the almost as short, but clearer
if (e && !err)
err = f();
(which is equivalent since we only care whether exit code is 0)
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By extracting the code for updating the HEAD and ORIG_HEAD symbolic
references to a separate function, we declutter cmd_reset() a bit and
we make it clear that e.g. the four variables {,sha1_}{,old_}orig are
only used by this code.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Throughout most of parse_args(), the variable 'i' remains at 0. Many
references are still made to the variable even when it could only have
the value 0. This made at least me, who has relatively little
experience with C programming styles, think that parts of the function
was meant to be part of a loop. To avoid such confusion, remove the
variable and also the 'argc' parameter and check for NULL trailing
argv instead.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Declutter cmd_reset() a bit by moving out the argument parsing to its
own function.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running e.g. "git reset ." in a bare repo results in an index file
being created from the HEAD commit. The differences compared to the
index are then printed as usual, but since there is no worktree, it
will appear as if all files are deleted. For example, in a bare clone
of git.git:
Unstaged changes after reset:
D .gitattributes
D .gitignore
D .mailmap
...
This happens because the check for is_bare_repository() happens after
we branch off into read_from_tree() to reset with paths. Fix by moving
the branching point after the check.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We use the path arguments in two places in reset.c: in
interactive_reset() and read_from_tree(). Both of these call
get_pathspec(), so we pass the (prefix, argv) pair to both
functions. Move the call to get_pathspec() out of these methods, for
two reasons: 1) One argument is simpler than two. 2) It lets us use
the (arguably clearer) "if (pathspec)" in place of "if (i < argc)".
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git reset $pathspec" currently exits with a non-zero exit code if the
worktree is dirty after resetting, which is inconsistent with reset
without pathspec, and it makes it harder to know whether the command
really failed. Change it to exit with code 0 regardless of whether the
worktree is dirty so that non-zero indicates an error.
This makes the 4 "disambiguation" test cases in t7102 clearer since
they all used to "fail", 3 of which "failed" due to changes in the
work tree. Now only the ambiguous one fails.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 34110cd (Make 'unpack_trees()' have a separate source and
destination index, 2008-03-06), the index no longer gets clobbered by
do_diff_cache() and we can remove the code for discarding and
re-reading it.
There are two paths to update_index_refresh() from cmd_reset(), but on
both paths, either read_cache() or read_cache_unmerged() will have
been called, so the call to read_cache() in this method is redundant
(although practically free).
This speeds up "git reset -- ." a little on the linux-2.6 repo (best
of five, warm cache):
Before After
real 0m0.093s 0m0.080s
user 0m0.040s 0m0.020s
sys 0m0.050s 0m0.050s
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create find_hook() function to determine if a given hook exists and is
executable. If it is, the path to the script will be returned,
otherwise NULL is returned.
This encapsulates the tests that are used to check for the existence of
a hook in one place, making it easier to modify those checks if that is
found to be necessary. This also makes it simple for places that can
use a hook to check if a hook exists before doing, possibly lengthy,
setup work which would be pointless if no such hook is present.
The returned value is left as a static value from get_pathname() rather
than a duplicate because it is anticipated that the return value will
either be used as a boolean, immediately added to an argv_array list
which would result in it being duplicated at that point, or used to
actually run the command without much intervening work. Callers which
need to hold onto the returned value for a longer time are expected to
duplicate the return value themselves.
Signed-off-by: Aaron Schrab <aaron@schrab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(1) Only print out the names of the files and directories that got
actually deleted. Also do not mention that we are not removing
directories when the user did not ask us to do so with '-d'.
(2) Show ignore message for skipped untracked git repositories.
Consider the following repo layout:
test.git/
|-- tracked_dir/
| |-- some_tracked_file
| |-- some_untracked_file
|-- tracked_file
|-- untracked_file
|-- untracked_foo/
| |-- bar/
| | |-- bar.txt
| |-- emptydir/
| |-- frotz.git/
| |-- frotz.tx
|-- untracked_some.git/
|-- some.txt
Suppose the user issues 'git clean -fd' from the test.git directory.
When -d option is used and untracked directory 'foo' contains a
subdirectory 'frotz.git' that is managed by a different git repository
therefore it will not be removed.
$ git clean -fd
Removing tracked_dir/some_untracked_file
Removing untracked_file
Removing untracked_foo/
Removing untracked_some.git/
The message displayed to the user is slightly misleading. The foo/
directory has not been removed because of foo/frotz.git still exists.
On the other hand the subdirectories 'bar' and 'emptydir' have been
deleted but they're not mentioned anywhere. Also, untracked_some.git
has not been removed either.
This behaviour is the result of the way the deletion of untracked
directories are reported. In the current implementation they are
deleted recursively but only the name of the top most directory is
printed out. The calling function does not know about any
subdirectories that could not be removed during the recursion.
Improve the way the deleted directories are reported back to
the user:
(1) Create a recursive delete function 'remove_dirs' in builtin/clean.c
to run in both dry_run and delete modes with the delete logic as
follows:
(a) Check if the current directory to be deleted is an untracked
git repository. If it is and --force --force option is not set
do not touch this directory, print ignore message, set dir_gone
flag to false for the caller and return.
(b) Otherwise for each item in current directory:
(i) If current directory cannot be accessed, print warning,
set dir_gone flag to false and return.
(ii) If the item is a subdirectory recurse into it,
check for the returned value of the dir_gone flag.
If the subdirectory is gone, add the name of the deleted
directory to a list of successfully removed items 'dels'.
Else set the dir_gone flag as the current directory
cannot be removed because we have at least one subdirectory
hanging around.
(iii) If it is a file try to remove it. If success add the
file name to the 'dels' list, else print error and set
dir_gone flag to false.
(c) After we finished deleting all items in the current directory and
the dir_gone flag is still true, remove the directory itself.
If failed set the dir_gone flag to false.
(d) If the current directory cannot be deleted because the dir_gone flag
has been set to false, print out all the successfully deleted items
for this directory from the 'dels' list.
(e) We're done with the current directory, return.
(2) Modify the cmd_clean() function to:
(a) call the recursive delete function 'remove_dirs()' for each
topmost directory it wants to remove
(b) check for the returned value of dir_gone flag. If it's true
print the name of the directory as being removed.
Consider the output of the improved version:
$ git clean -fd
Removing tracked_dir/some_untracked_file
Removing untracked_file
Skipping repository untracked_foo/frotz.git
Removing untracked_foo/bar
Removing untracked_foo/emptydir
Skipping repository untracked_some.git/
Now it displays only the file and directory names that got actually
deleted and shows the name of the untracked git repositories it ignored.
Reported-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git clone --separate-git-dir=$over_there" is interrupted, it
failed to remove the real location of the $GIT_DIR it created. This
was most visible when interrupting a submodule update.
* jl/interrupt-clone-remove-separate-git-dir:
clone: support atomic operation with --separate-git-dir
"git merge --no-edit" computed who were involved in the work done
on the side branch, even though that information is to be discarded
without getting seen in the editor.
* jc/maint-fmt-merge-msg-no-edit-lose-credit:
merge --no-edit: do not credit people involved in the side branch
"git apply" misbehaved when fixing whitespace breakages by removing
excess trailing blank lines.
* jc/apply-trailing-blank-removal:
apply.c:update_pre_post_images(): the preimage can be truncated
Update the disused merge-tree proof-of-concept code.
* jc/merge-blobs:
merge-tree: fix d/f conflicts
merge-tree: add comments to clarify what these functions are doing
merge-tree: lose unused "resolve_directories"
merge-tree: lose unused "flags" from merge_list
Which merge_file() function do you mean?
Teach "format-patch" to prefix v4- to its output files for the
fourth iteration of a patch series, to make it easier for the
submitter to keep separate copies for iterations.
* jc/format-patch-reroll:
format-patch: give --reroll-count a short synonym -v
format-patch: document and test --reroll-count
format-patch: add --reroll-count=$N option
get_patch_filename(): split into two functions
get_patch_filename(): drop "just-numbers" hack
get_patch_filename(): simplify function signature
builtin/log.c: stop using global patch_suffix
builtin/log.c: drop redundant "numbered_files" parameter from make_cover_letter()
builtin/log.c: drop unused "numbered" parameter from make_cover_letter()
"git merge" started calling prepare-commit-msg hook like "git
commit" does some time ago, but forgot to pay attention to the exit
status of the hook.
* ap/merge-stop-at-prepare-commit-msg-failure:
merge: Honor prepare-commit-msg return code
Earlier, dc87183 (use GIT_CONFIG only in "git config", not other
programs, 2008-06-30) made sure that the environment variable is
never used outside "git config", but "git clone", after creating a
directory for the new repository and until the init_db() function
populates its .git/ directory, exported the variable for no good
reason. No hook will run from init_db() and more importantly no
hook can run until init_db() finishes creation of the new
repository, so it cannot be used by any invocation of "git config"
by definition.
Stop doing the useless export/unexport.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can do --depth=2147483647 (*) for restoring complete repo
now. But it's hard to remember. Any other numbers larger than the
longest commit chain in the repository would also do, but some
guessing may be involved. Make easy-to-remember --unshallow an alias
for --depth=2147483647.
Make upload-pack recognize this special number as infinite depth. The
effect is essentially the same as before, except that upload-pack is
more efficient because it does not have to traverse to the bottom
anymore.
The chance of a user actually wanting exactly 2147483647 commits
depth, not infinite, on a repository with a history that long, is
probably too small to consider. The client can learn to add or
subtract one commit to avoid the special treatment when that actually
happens.
(*) This is the largest positive number a 32-bit signed integer can
contain. JGit and older C Git store depth as "int" so both are OK
with this number. Dulwich does not support shallow clone.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --separate-git-dir option was introduced to make it simple to put
the git directory somewhere outside the worktree, for example when
cloning a repository for use as a submodule.
It was not intended for use when creating a bare repository. In that
case there is no worktree and it is more natural to directly clone the
repository and create a .git file as separate steps:
git clone --bare /path/to/repo.git bar.git
printf 'gitdir: bar.git\n' >foo.git
Forbid the combination, making the command easier to explain.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git clone --separate-git-dir" is interrupted, we failed to
remove the real location we created the repository.
* jl/interrupt-clone-remove-separate-git-dir:
clone: support atomic operation with --separate-git-dir
Refactor and generally clean up the directory traversal API
implementation.
* as/dir-c-cleanup:
dir.c: rename free_excludes() to clear_exclude_list()
dir.c: refactor is_path_excluded()
dir.c: refactor is_excluded()
dir.c: refactor is_excluded_from_list()
dir.c: rename excluded() to is_excluded()
dir.c: rename excluded_from_list() to is_excluded_from_list()
dir.c: rename path_excluded() to is_path_excluded()
dir.c: rename cryptic 'which' variable to more consistent name
Improve documentation and comments regarding directory traversal API
api-directory-listing.txt: update to match code
Stop spending cycles to compute information to be placed on
commented lines in "merge --no-edit", which will be discarded
anyway.
* jc/maint-fmt-merge-msg-no-edit-lose-credit:
merge --no-edit: do not credit people involved in the side branch
Teach "log.mailmap" configuration variable to turn "--use-mailmap"
option on to "git log", "git show" and "git whatchanged".
The "--no-use-mailmap" option from the command line can countermand
the setting.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the --use-mailmap option to log commands. It allows to display
names from mailmap file when displaying logs, whatever the format
used.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify map_user(), mostly to avoid copies of string buffers. It
also simplifies caller functions.
map_user() directly receive pointers and length from the commit buffer
as mail and name. If mapping of the user and mail can be done, the
pointer is updated to a new location. Lengths are also updated if
necessary.
The caller of map_user() can then copy the new email and name if
necessary.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default of the "cleanup" option in "git commit"
is not configurable. Users who don't want to use the
default have to pass this option on every commit since
there's no way to configure it. This commit introduces
a new config option "commit.cleanup" which can be used
to change the default of the "cleanup" option in
"git commit".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach various forms of "format-patch" command line to identify what
branch the patches are taken from, so that the branch description
is picked up in more cases.
* nd/maint-branch-desc-doc:
format-patch: pick up branch description when no ref is specified
format-patch: pick up correct branch name from symbolic ref
t4014: a few more tests on cover letter using branch description
branch: delete branch description if it's empty
config.txt: a few lines about branch.<name>.description
"git merge" started calling prepare-commit-msg hook like "git
commit" does some time ago, but forgot to pay attention to the exit
status of the hook. t7505 may want a general clean-up but that is
a different topic.
* ap/merge-stop-at-prepare-commit-msg-failure:
merge: Honor prepare-commit-msg return code
Currently blame.c::get_acline(), pretty.c::pp_user_info() and
shortlog.c::insert_one_record() are parsing author name, email, time
and tz themselves.
Use ident.c::split_ident_line() for better code reuse.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix to update_pre_post_images() that did not take into account the
possibility that whitespace fix could shrink the preimage and
change the number of lines in it.
* jc/apply-trailing-blank-removal:
apply.c:update_pre_post_images(): the preimage can be truncated
This will be reused by a new git check-ignore command.
Also document validate_pathspec().
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the body of the for loop in treat_gitlinks() into a separate
check_path_for_gitlink() function so that it can be reused elsewhere.
This paves the way for a new check-ignore sub-command.
Also document treat_gitlinks().
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perform the following function renames to make it explicit that these
pathspec handling functions are for matching against the index, rather
than against a tree or the working directory.
- fill_pathspec_matches() -> add_pathspec_matches_against_index()
- find_used_pathspec() -> find_pathspecs_matching_against_index()
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the following functions from builtin/add.c to pathspec.c, in
preparation for reuse by a new git check-ignore command:
- fill_pathspec_matches()
- find_used_pathspec()
The functions being extracted are not changed in any way, except
removal of the 'static' qualifier.
Also add comments documenting these newly public functions,
including clarifications that they operate on the index.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'argc' argument passed to validate_pathspec() was never used.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For exclude patterns read in from files, the filename is stored in the
exclude list, and the originating line number is stored in the
individual exclude (counting starting at 1).
For exclude patterns provided on the command line, a string describing
the source of the patterns is stored in the exclude list, and the
sequence number assigned to each exclude pattern is negative, with
counting starting at -1. So for example the 2nd pattern provided via
--exclude would be numbered -2. This allows any future consumers of
that data to easily distinguish between exclude patterns from files
vs. from the CLI.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously each exclude_list could potentially contain patterns
from multiple sources. For example dir->exclude_list[EXC_FILE]
would typically contain patterns from .git/info/exclude and
core.excludesfile, and dir->exclude_list[EXC_DIRS] could contain
patterns from multiple per-directory .gitignore files during
directory traversal (i.e. when dir->exclude_stack was more than
one item deep).
We split these composite exclude_lists up into three groups of
exclude_lists (EXC_CMDL / EXC_DIRS / EXC_FILE as before), so that each
exclude_list now contains patterns from a single source. This will
allow us to cleanly track the origin of each pattern simply by adding
a src field to struct exclude_list, rather than to struct exclude,
which would make memory management of the source string tricky in the
EXC_DIRS case where its contents are dynamically generated.
Similarly, by moving the filebuf member from struct exclude_stack to
struct exclude_list, it allows us to track and subsequently free
memory buffers allocated during the parsing of all exclude files,
rather than only tracking buffers allocated for files in the EXC_DIRS
group.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Require "-f" for push to update a tag, even if it is a fast-forward.
* cr/push-force-tag-update:
push: allow already-exists advice to be disabled
push: rename config variable for more general use
push: cleanup push rules comment
push: clarify rejection of update to non-commit-ish
push: require force for annotated tags
push: require force for refs under refs/tags/
push: flag updates that require force
push: keep track of "update" state separately
push: add advice for rejected tag reference
push: return reject reasons as a bitset
Various updates to fast-export used in the context of the remote
helper interface.
* fc/fast-export-fixes:
fast-export: make sure updated refs get updated
fast-export: don't handle uninteresting refs
fast-export: fix comparison in tests
fast-export: trivial cleanup
remote-testgit: implement the "done" feature manually
remote-testgit: report success after an import
remote-testgit: exercise more features
remote-testgit: cleanup tests
remote-testgit: remove irrelevant test
remote-testgit: remove non-local functionality
Add new simplified git-remote-testgit
Rename git-remote-testgit to git-remote-testpy
remote-helpers: fix failure message
remote-testgit: fix direction of marks
fast-export: avoid importing blob marks
Optimize matching paths with common forms of pathspecs that contain
wildcard characters.
* nd/pathspec-wildcard:
tree_entry_interesting: do basedir compare on wildcard patterns when possible
pathspec: apply "*.c" optimization from exclude
pathspec: do exact comparison on the leading non-wildcard part
pathspec: save the non-wildcard length part
Since b57fb80a7d (init, clone: support --separate-git-dir for .git file)
git clone supports the --separate-git-dir option to create the git dir
outside the work tree. But when that option is used, the git dir won't be
deleted in case the clone fails like it would be without this option. This
makes clone lose its atomicity as in case of a failure a partly set up git
dir is left behind. A real world example where this leads to problems is
when "git submodule update" fails to clone a submodule and later calls to
"git submodule update" stumble over the partially set up git dir and try
to revive the submodule from there, which then fails with a not very user
friendly error message.
Fix that by updating the junk_git_dir variable (used to remember if and
what git dir should be removed in case of failure) to the new value given
with the --seperate-git-dir option. Also add a test for this to t5600 (and
while at it fix the former last test to not cd into a directory to test
for its existence but use "test -d" instead).
Reported-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Accept "-v" as a synonym to "--reroll-count", so that users can say
"git format-patch -v4 master", instead of having to fully spell it
out as "git format-patch --reroll-count=4 master".
As I do not think of a reason why users would want to tell the
command to be "verbose", I think this should be OK.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
65969d4 (merge: honor prepare-commit-msg hook, 2011-02-14) tried to
make "git commit" and "git merge" consistent, because a merge that
required user assistance has to be concluded with "git commit", but
back then only "git commit" triggered prepare-commit-msg hook.
When it added a call to run the prepare-commit-msg hook, however, it
forgot to check the exit code from the hook like "git commit" does,
and ended up replacing one inconsistency with another.
When prepare-commit-msg hook that is run from "git merge" exits with
a non-zero status, abort the commit.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only try to get branch name in "format-patch origin" case or
similar and not "format-patch -22" where HEAD is automatically
added. Without correct branch name, branch description cannot be
added. Make sure we always get branch name.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
find_branch_name() assumes to take refs/heads/<branch>. But we also
have symbolic refs, such as HEAD, that can point to a valid branch in
refs/heads and do not follow refs/heads/<branch> syntax. Remove the
assumption and apply normal ref resolution. After all it would be
confusing if rev machinery resolves a ref in one way and
find_branch_name() another.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a line to be wrapped has a solid run of non space characters
whose length exactly is the wrap width, "git shortlog -w" failed to
add a newline after such a line.
* sp/shortlog-missing-lf:
strbuf_add_wrapped*(): Remove unused return value
shortlog: fix wrapping lines of wraplen
The credit lines "By" and "Via" to credit authors and committers for
their contributions on the side branch are meant as a hint to the
integrator to decide whom to mention in the log message text. After
the integrator saves the message in the editor, they are meant to go
away and that is why they are commented out.
When a merge is recorded without editing the generated message,
however, its contents do not go through the normal stripspace()
and these lines are left in the merge.
Stop producing them when we know the merge is going to be recorded
without editing, i.e. when --no-edit is given.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start adopting clearer names for exclude functions. This 'is_*'
naming pattern for functions returning booleans was agreed here:
http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit documented two known breakages revolving around
a case where one side flips a tree into a blob (or vice versa),
where the original code simply gets confused and feeds a mixture of
trees and blobs into either the recursive merge-tree (and recursing
into the blob will fail) or three-way merge (and merging tree contents
together with blobs will fail).
Fix it by feeding trees (and only trees) into the recursive
merge-tree machinery and blobs (and only blobs) into the three-way
content level merge machinery separately; when this happens, the
entire merge has to be marked as conflicting at the structure level.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the "branch1" parameter given to resolve() to "ours", to
clarify what is going on. Also, annotate the unresolved_directory()
function with some comments to show what decisions are made in each
step, and highlight two bugs that need to be fixed.
Add two tests to t4300 to illustrate these bugs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --reroll-count=$N option, when given a positive integer:
- Adds " v$N" to the subject prefix specified. As the default
subject prefix string is "PATCH", --reroll-count=2 makes it
"PATCH v2".
- Prefixes "v$N-" to the names used for output files. The cover
letter, whose name is usually 0000-cover-letter.patch, becomes
v2-0000-cover-letter.patch when given --reroll-count=2.
This allows users to use the same --output-directory for multiple
iterations of the same series, without letting the output for a
newer round overwrite output files from the earlier rounds. The
user can incorporate materials from earlier rounds to update the
newly minted iteration, and use "send-email v2-*.patch" to send out
the patches belonging to the second iteration easily.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function switched between two operating modes depending on the
NULL-ness of its two parameters, as a hacky way to share small part
of implementation, sacrificing cleanliness of the API.
Implement "fmt_output_subject()" function that takes a subject
string and gives the name for the output file, and on top of it,
implement "fmt_output_commit()" function that takes a commit and
gives the name for the output file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function chooses from three operating modes (format using the
subject, the commit, or just number) based on NULL-ness of two of
its parameters, which is an ugly hack for sharing only a bit of
code.
Separate out the "just numbers" part out to the callers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most functions that emit to a strbuf take the strbuf as their first
parameter; make this function follow suit.
The serial number of the patch being emitted (nr) and suffix used
for patch filename (suffix) are both recorded in rev_info; drop
these separate parameters and pass the rev_info directly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The suffix for the output filename is found in rev->patch_suffix; do
not keep using the global that is only used to parse the command
line and configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently it gets the size of an otherwise unrelated, unused variable
instead of the expected struct size.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A recent commit [1] fixed a off-by-one wrapping error. As a
side-effect, the conditional in add_wrapped_shortlog_msg() to decide
whether to append a newline needs to be removed. The function
should always append a newline, which was the case before the
off-by-one fix, because strbuf_add_wrapped_text() never returns a
value of wraplen; when it returns wraplen, the string does not end
with a newline, so this caller needs to add one anyway.
[1] 14e1a4e1ff utf8: fix off-by-one
wrapping of text
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different static functions and one global function,
all of them called "merge_file()", with different signatures and
purposes. Rename them all to reduce confusion in "git grep" output:
* Rename the static one in merge-index to "merge_one_path(const char
*path)" as that function is about asking an external command to
resolve conflicts in one path.
* Rename the global one in merge-file.c that is only used by
merge-tree to "merge_blobs()", as the function takes three blobs and
returns the merged result only in-core, without doing anything to
the filesystem.
* Rename the one in merge-recursive to "merge_one_file()", just to be
fair.
Also rename merge-file.[ch] to merge-blobs.[ch].
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
When an object has already been exported (and thus is in the marks) it's
flagged as SHOWN, so it will not be exported again, even if in a later
time it's exported through a different ref.
We don't need the object to be exported again, but we want the ref
updated, which doesn't happen.
Since we can't know if a ref was exported or not, let's just assume that
if the commit was marked (flags & SHOWN), the user still wants the ref
updated.
IOW: If it's specified in the command line, it will get updated,
regardless of whether or not the object was marked.
So:
% git branch test master
% git fast-export $mark_flags master
% git fast-export $mark_flags test
Would export 'test' properly.
Additionally, this fixes issues with remote helpers; now they can push
refs whose objects have already been exported, and a few other issues as
well. Update the tests accordingly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They have been marked as UNINTERESTING for a reason, lets respect
that. Currently the first ref is handled properly, but not the
rest. Assuming that all the refs point at the same commit in the
following example:
% git fast-export master ^uninteresting ^foo ^bar
reset refs/heads/bar
from :0
reset refs/heads/foo
from :0
reset refs/heads/uninteresting
from :0
% git fast-export ^uninteresting ^foo ^bar master
reset refs/heads/master
from :0
reset refs/heads/bar
from :0
reset refs/heads/foo
from :0
Clearly this is wrong; the negative refs should be ignored.
After this patch:
% git fast-export ^uninteresting ^foo ^bar master
# nothing
% git fast-export master ^uninteresting ^foo ^bar
# nothing
And even more, it would only happen if the ref is pointing to exactly
the same commit, but not otherwise:
% git fast-export ^next next
reset refs/heads/next
from :0
% git fast-export ^next next^{commit}
# nothing
% git fast-export ^next next~0
# nothing
% git fast-export ^next next~1
# nothing
% git fast-export ^next next~2
# nothing
The reason this happens is that before traversing the commits,
fast-export checks if any of the refs point to the same object, and any
duplicated ref gets added to a list in order to issue 'reset' commands
after the traversing. Unfortunately, it's not even checking if the
commit is flagged as UNINTERESTING. The fix of course, is to check it.
However, in order to do it properly we need to get the UNINTERESTING
flag from the command line, not from the commit object, because
"^foo bar" will mark the commit 'bar' uninteresting if foo and bar
points at the same commit. rev_cmdline_info, which was introduced
exactly to handle this situation, contains all the information we
need for get_tags_and_duplicates(), plus the ref flag. This way the
rest of the positive refs will remain untouched; it's only the
negative ones that change in behavior.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'advice.pushAlreadyExists' option to disable the advice shown when
an update is rejected for a reference that is not allowed to update at
all (verses those that are allowed to fast-forward.)
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'pushNonFastForward' advice config can be used to squelch several
instances of push-related advice. Rename it to 'pushUpdateRejected' to
cover other reject scenarios that are unrelated to fast-forwarding.
Retain the old name for compatibility.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References are allowed to update from one commit-ish to another if the
former is an ancestor of the latter. This behavior is oriented to
branches which are expected to move with commits. Tag references are
expected to be static in a repository, though, thus an update to
something under refs/tags/ should be rejected unless the update is
forced.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Advising the user to fetch and merge only makes sense if the rejected
reference is a branch. If none of the rejections are for branches, just
tell the user the reference already exists.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass all rejection reasons back from transport_push(). The logic is
simpler and more flexible with regard to providing useful feedback.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
General clean-ups in various areas, originally written to support a
patch that later turned out to be unneeded.
* jk/send-email-sender-prompt:
t9001: check send-email behavior with implicit sender
t: add tests for "git var"
ident: keep separate "explicit" flags for author and committer
ident: make user_ident_explicitly_given static
t7502: factor out autoident prerequisite
test-lib: allow negation of prerequisites
Finishing touches to "git rm $submodule" that removes the working
tree of a submodule.
* jl/submodule-rm:
Teach rm to remove submodules when given with a trailing '/'
Setting 'commit' to 'commit' is a no-op. It might have been there to
avoid a compiler warning, but if so, it was the compiler to blame, and
it's certainly not there any more.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parenthesis are not matching in `builtin_remote_sethead_usage`
as a square bracket is closing something never opened.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to be able to import, and then export, using the same marks, so
that we don't push things that the other side already received.
Unfortunately, fast-export doesn't store blobs in the marks, but
fast-import does. This creates a mismatch when fast export is reusing a
mark that was previously stored by fast-import.
There is no point in one tool saving blobs, and the other not, but for
now let's just check in fast-export that the objects are indeed commits.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doing a "git rm submod/" on a submodule results in an error:
fatal: pathspec 'submod/' did not match any files
This is really inconvenient as e.g. using TAB completion in a shell on a
submodule automatically adds the trailing '/' when it completes the path
of the submodule directory. The user has then to remove the '/' herself to
make a "git rm" succeed. Doing a "git rm -r somedir/" is working fine, so
there is no reason why that shouldn't work for submodules too.
Teach git rm to not error out when a '/' is appended to the path of a
submodule. Achieve this by chopping off trailing slashes from the path
names given if they represent directories. Add tests to make sure that
logic only applies to directories and not to files.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop duplicate detection from "git-config --get"; this lets it
better match the internal config callbacks, which clears up some
corner cases with includes.
* jk/config-ignore-duplicates:
builtin/config.c: Fix a sparse warning
git-config: use git_config_with_options
git-config: do not complain about duplicate entries
git-config: collect values instead of immediately printing
git-config: fix regexp memory leaks on error conditions
git-config: remove memory leak of key regexp
t1300: test "git config --get-all" more thoroughly
t1300: remove redundant test
t1300: style updates
"git config --path $key" segfaulted on "[section] key" (a boolean
"true" spelled without "=", not "[section] key = true").
* cn/config-missing-path:
config: don't segfault when given --path with a missing value
Use preloadindex in more places, which has a nice speedup on systems
with slow stat calls (and even on Linux).
* kb/preload-index-more:
update-index/diff-index: use core.preloadindex to improve performance
We mark pathspec with wildcards with the field use_wildcard. We
could do better by saving the length of the non-wildcard part, which
can be used for optimizations such as f9f6e2c (exclude: do strcmp as
much as possible before fnmatch - 2012-06-07).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A symbolic ref refs/heads/SYM was not correctly removed with "git
branch -d SYM"; the command removed the ref pointed by SYM instead.
* rs/branch-del-symref:
branch: show targets of deleted symrefs, not sha1s
branch: skip commit checks when deleting symref branches
branch: delete symref branch, not its target
branch: factor out delete_branch_config()
branch: factor out check_branch_commit()
"git grep -e pattern <tree>" asked the attribute system to read
"<tree>:.gitattributes" file in the working tree, which was
nonsense.
* nd/grep-true-path:
grep: stop looking at random places for .gitattributes
When given a variable without a value, such as '[section] var' and
asking git-config to treat it as a path, git_config_pathname returns
an error and doesn't modify its output parameter. show_config assumes
that the call is always successful and sets a variable to indicate
that vptr should be freed. In case of an error however, trying to do
this will cause the program to be killed, as it's pointing to memory
in the stack.
Detect the error and return immediately to avoid freeing or accessing
the uninitialed memory in the stack.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We keep track of whether the user ident was given to us
explicitly, or if we guessed at it from system parameters
like username and hostname. However, we kept only a single
variable. This covers the common cases (because the author
and committer will usually come from the same explicit
source), but can miss two cases:
1. GIT_COMMITTER_* is set explicitly, but we fallback for
GIT_AUTHOR. We claim the ident is explicit, even though
the author is not.
2. GIT_AUTHOR_* is set and we ask for author ident, but
not committer ident. We will claim the ident is
implicit, even though it is explicit.
This patch uses two variables instead of one, updates both
when we set the "fallback" values, and updates them
individually when we read from the environment.
Rather than keep user_ident_sufficiently_given as a
compatibility wrapper, we update the only two callers to
check the committer_ident, which matches their intent and
what was happening already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we switch to a new branch using checkout, we usually output a
message indicating what happened. However, when we switch from an unborn
branch to a new branch, we do not print anything, which may leave the
user wondering what happened.
The reason is that the unborn branch is a special case (see abe1998),
and does not follow the usual switch_branches code path. Let's add a
similar informational message to the special case to match the usual
code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emit the notes attached to the commit in "format-patch --notes"
output after three-dashes.
* jc/prettier-pretty-note:
format-patch: add a blank line between notes and diffstat
Doc User-Manual: Patch cover letter, three dashes, and --notes
Doc format-patch: clarify --notes use case
Doc notes: Include the format-patch --notes option
Doc SubmittingPatches: Mention --notes option after "cover letter"
Documentation: decribe format-patch --notes
format-patch --notes: show notes after three-dashes
format-patch: append --signature after notes
pretty_print_commit(): do not append notes message
pretty: prepare notes message at a centralized place
format_note(): simplify API
pretty: remove reencode_commit_message()
Various codepaths checked if two encoding names are the same using
ad-hoc code and some of them ended up asking iconv() to convert
between "utf8" and "UTF-8". The former is not a valid way to spell
the encoding name, but often people use it by mistake, and we
equated them in some but not all codepaths. Introduce a new helper
function to make these codepaths consistent.
* jc/same-encoding:
reencode_string(): introduce and use same_encoding()
Conflicts:
builtin/mailinfo.c
Add "symbolic-ref -d SYM" to delete a symbolic ref SYM.
It is already possible to remove a symbolic ref with "update-ref -d
--no-deref", but it may be a good addition for completeness.
* jh/symbolic-ref-d:
git symbolic-ref --delete $symref
'git replace' parses the revision arguments when it creates replacements
(so that a sha1 can be abbreviated, e.g.) but not when deleting
replacements.
Make it parse the argument to 'replace -d' in the same way.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Jeff King <peff@peff.net>
Code cleanups so that libgit.a does not depend on anything in the
builtin/ directory.
* nd/builtin-to-libgit:
fetch-pack: move core code to libgit.a
fetch-pack: remove global (static) configuration variable "args"
send-pack: move core code to libgit.a
Move setup_diff_pager to libgit.a
Move print_commit_list to libgit.a
Move estimate_bisect_steps to libgit.a
Move try_merge_command and checkout_fast_forward to libgit.a
Callers of reencode_string() that re-encodes a string from one
encoding to another all used ad-hoc way to bypass the case where the
input and the output encodings are the same. Some did strcmp(),
some did strcasecmp(), yet some others when converting to UTF-8 used
is_encoding_utf8().
Introduce same_encoding() helper function to make these callers use
the same logic. Notably, is_encoding_utf8() has a work-around for
common misconfiguration to use "utf8" to name UTF-8 encoding, which
does not match "UTF-8" hence strcasecmp() would not consider the
same. Make use of it in this helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'update-index --refresh' and 'diff-index' (without --cached) don't honor
the core.preloadindex setting yet. Porcelain commands using these (such as
git [svn] rebase) suffer from this, especially on Windows.
Use read_cache_preload to improve performance.
Additionally, in builtin/diff.c, don't preload index status if we don't
access the working copy (--cached).
Results with msysgit on WebKit repo (2GB in 200k files):
| update-index | diff-index | rebase
----------------+--------------+------------+---------
msysgit-v1.8.0 | 9.157s | 10.536s | 42.791s
+ preloadindex | 9.157s | 10.536s | 28.725s
+ this patch | 2.329s | 2.752s | 15.152s
+ fscache [1] | 0.731s | 1.171s | 8.877s
[1] https://github.com/kblees/git/tree/kb/fscache-v3
Thanks-to: Albert Krawczyk <pro-logic@optusnet.com.au>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Jeff King <peff@peff.net>
A symbolic ref refs/heads/SYM was not correctly removed with
"git branch -d SYM"; the command removed the ref pointed by
SYM instead.
* rs/branch-del-symref:
branch: show targets of deleted symrefs, not sha1s
branch: skip commit checks when deleting symref branches
branch: delete symref branch, not its target
branch: factor out delete_branch_config()
branch: factor out check_branch_commit()
Allow an earlier "--short" option on the command line to be
countermanded with the "--long" option for "git status" and "git
commit".
* nd/status-long:
status: add --long output format option
"git grep -e pattern <tree>" asked the attribute system to read
"<tree>:.gitattributes" file in the working tree, which was
nonsense.
* nd/grep-true-path:
grep: stop looking at random places for .gitattributes
"git log -F -E --grep='<ere>'" failed to use the given <ere>
pattern as extended regular expression, and instead looked for the
string literally. The early part of this series is a fix for it;
the latter part teaches log to respect the grep.* configuration.
* jc/grep-pcre-loose-ends:
log: honor grep.* configuration
log --grep: accept --basic-regexp and --perl-regexp
log --grep: use the same helper to set -E/-F options as "git grep"
revisions: initialize revs->grep_filter using grep_init()
grep: move pattern-type bits support to top-level grep.[ch]
grep: move the configuration parsing logic to grep.[ch]
builtin/grep.c: make configuration callback more reusable
"git rm submodule" cannot blindly remove a submodule directory as
its working tree may have local changes, and worse yet, it may even
have its repository embedded in it. Teach it some special cases
where it is safe to remove a submodule, specifically, when there is
no local changes in the submodule working tree, and its repository
is not embedded in its working tree but is elsewhere and uses the
gitfile mechanism to point at it.
* jl/submodule-rm:
submodule: teach rm to remove submodules unless they contain a git directory
fetch_pack() is used by transport.c, part of libgit.a while it stays
in builtin/fetch-pack.c. Move it to fetch-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
This helps removes the hack in fetch_pack() that copies my_args to args.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
send_pack() is used by transport.c, part of libgit.a while it stays in
builtin/send-pack.c. Move it to send-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
This is used by diff-no-index.c, part of libgit.a while it stays in
builtin/diff.c. Move it to diff.c so that we won't get undefined
reference if a program that uses libgit.a happens to pull it in.
While at it, move check_pager from git.c to pager.c. It makes more
sense there and pager.c is also part of libgit.a
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
This is used by bisect.c, part of libgit.a while it stays in
builtin/rev-list.c. Move it to commit.c so that we won't get undefined
reference if a program that uses libgit.a happens to pull it in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
This function is used by bisect.c, part of libgit.a while
estimate_bisect_steps stays in builtin/rev-list.c. Move it to bisect.a
so we won't have undefine reference if a standalone program that uses
libgit.a happens to pull it in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
These functions are called in sequencer.c, which is part of
libgit.a. This makes libgit.a potentially require builtin/merge.c for
external git commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Sparse issues an "Using plain integer as NULL pointer" warning while
checking a 'struct strbuf_list' initializer expression. The initial
field of the struct has pointer type, but the initializer expression
is given as '{0}'. In order to suppress the warning, we simply replace
the initializer with '{NULL}'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jeff King <peff@peff.net>
Speeds up "git upload-pack" (what is invoked by "git fetch" on the
other side of the connection) by reducing the cost to advertise the
branches and tags that are available in the repository.
* jk/peel-ref:
upload-pack: use peel_ref for ref advertisements
peel_ref: check object type before loading
peel_ref: do not return a null sha1
peel_ref: use faster deref_tag_noverify
The git-config command has always implemented its own file
lookup and parsing order. This was necessary because its
duplicate-entry handling did not match the way git's
internal callbacks worked. Now that this is no longer the
case, we are free to reuse the existing parsing code.
This saves us a few lines of code, but most importantly, it
means that the logic for which files are examined is
contained only in one place and cannot diverge.
Signed-off-by: Jeff King <peff@peff.net>
If git-config is asked for a single value, it will complain
and exit with an error if it finds multiple instances of
that value. This is unlike the usual internal config
parsing, however, which will generally overwrite previous
values, leaving only the final one. For example:
[set a multivar]
$ git config user.email one@example.com
$ git config --add user.email two@example.com
[use the internal parser to fetch it]
$ git var GIT_AUTHOR_IDENT
Your Name <two@example.com> ...
[use git-config to fetch it]
$ git config user.email
one@example.com
error: More than one value for the key user.email: two@example.com
This overwriting behavior is critical for the regular
parser, which starts with the lowest-priority file (e.g.,
/etc/gitconfig) and proceeds to the highest-priority file
($GIT_DIR/config). Overwriting yields the highest priority
value at the end.
Git-config solves this problem by implementing its own
parsing. It goes from highest to lowest priorty, but does
not proceed to the next file if it has seen a value.
So in practice, this distinction never mattered much,
because it only triggered for values in the same file. And
there was not much point in doing that; the real value is in
overwriting values from lower-priority files.
However, this changed with the implementation of config
include files. Now we might see an include overriding a
value from the parent file, which is a sensible thing to do,
but git-config will flag as a duplication.
This patch drops the duplicate detection for git-config and
switches to a pure-overwrite model (for the single case;
--get-all can still be used if callers want to do something
more fancy).
As is shown by the modifications to the test suite, this is
a user-visible change in behavior. An alternative would be
to just change the include case, but this is much cleaner
for a few reasons:
1. If you change the include case, then to what? If you
just stop parsing includes after getting a value, then
you will get a _different_ answer than the regular
config parser (you'll get the first value instead of
the last value). So you'd want to implement overwrite
semantics anyway.
2. Even though it is a change in behavior for git-config,
it is bringing us in line with what the internal
parsers already do.
3. The file-order reimplementation is the only thing
keeping us from sharing more code with the internal
config parser, which will help keep differences to a
minimum.
Going under the assumption that the primary purpose of
git-config is to behave identically to how git's internal
parsing works, this change can be seen as a bug-fix.
Signed-off-by: Jeff King <peff@peff.net>
This is a refactor that will allow us to more easily tweak
the behavior for multi-valued variables, and it will
ultimately allow us to remove a lot git-config's custom code
in favor of the regular git_config code.
It does mean we're no longer streaming, and we're storing
more in memory for the --get-all case, but in practice it is
a tiny amount of data, and the results are instantaneous.
Signed-off-by: Jeff King <peff@peff.net>
The get_value function has a goto label for cleaning up on
errors, but it only cleans up half of what the function
might allocate. Let's also clean up the key and regexp
variables there.
Note that we need to take special care when compiling the
regex fails to clean it up ourselves, since it is in a
half-constructed state (we would want to free it, but not
regfree it).
Similarly, we fix git_config_parse_key to return NULL when
it fails, not a pointer to some already-freed memory.
Signed-off-by: Jeff King <peff@peff.net>
Teach symbolic-ref to delete symrefs by adding the -d/--delete option to
git-symbolic-ref. Both proper and dangling symrefs are deleted by this
option, but other refs - or anything else that is not a symref - is not.
The symref deletion is performed by first verifying that we are given a
proper symref, and then invoking delete_ref() on it with the REF_NODEREF
flag.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can currently set the output format to --short or
--porcelain. There is no --long, because we default to it
already. However, you may want to override an alias that
uses "--short" to get back to the default.
This requires a little bit of refactoring, because currently
we use STATUS_FORMAT_LONG internally to mean the same as
"the user did not specify anything". By expanding the enum
to include STATUS_FORMAT_NONE, we can distinguish between
the implicit and explicit cases. This effects these
conditions:
1. The user has asked for NUL termination. With NONE, we
currently default to turning on the porcelain mode.
With an explicit --long, we would in theory use NUL
termination with the long mode, but it does not support
it. So we can just complain and die.
2. When an output format is given to "git commit", we
default to "--dry-run". This behavior would now kick in
when "--long" is given, too.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git branch reports the abbreviated hash of the head commit of
a deleted branch to make it easier for a user to undo the
operation. For symref branches this doesn't help. Print the
symref target instead for them.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before a branch is deleted, we check that it points to a valid
commit. With -d we also check that the commit is a merged; this
check is not done with -D.
The reason for that is that commits pointed to by branches should
never go missing; if they do then something broke and it's better
to stop instead of adding to the mess. And a non-merged commit
may contain changes that are worth preserving, so we require the
stronger option -D instead of -d to get rid of them.
If a branch consists of a symref, these concerns don't apply.
Deleting such a branch can't make a commit become unreferenced,
so we don't need to check if it is merged, or even if it is
actually a valid commit. Skip them in that case. This allows
us to delete dangling symref branches.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a branch that is to be deleted happens to be a symref to another
branch, the current code removes the targeted branch instead of the
one it was called for.
Change this surprising behaviour and delete the symref branch
instead.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a small helper function for deleting branch config sections.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the code to perform checks on the tip commit of a branch
to its own function.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function has only two callsites, and is a thin wrapper whose
usefulness is dubious. When the caller needs to learn the log
output encoding, it should be able to do so by directly calling
get_log_output_encoding() and calling the underlying
logmsg_reencode() with it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
5166714 (apply: Allow blank context lines to match beyond EOF,
2010-03-06) and then later 0c3ef98 (apply: Allow blank *trailing*
context lines to match beyond EOF, 2010-04-08) taught "git apply"
to trim new blank lines at the end in the patch text when matching
the contents being patched and the preimage recorded in the patch,
under --whitespace=fix mode.
When a preimage is modified to match the current contents in
preparation for such a "fixed" patch application, the context lines
in the postimage must be updated to match (otherwise, it would
reintroduce whitespace breakages), and update_pre_post_images()
function is responsible for doing this. However, this function was
not updated to take into account a case where the removal of
trailing blank lines reduces the number of lines in the preimage,
and triggered an assertion error.
The logic to fix the postimage by copying the corrected context
lines from the preimage was not prepared to handle this case,
either, but it was protected by the assert() and only got exposed
when the assertion is corrected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep searches for .gitattributes using "name" field in struct
grep_source but that field is not real on-disk path name. For example,
"grep pattern rev" fills the field with "rev:path", and Git looks for
.gitattributes in the (non-existent but exploitable) path "rev:path"
instead of "path".
This patch passes real paths down to grep_source_load_driver() when:
- grep on work tree
- grep on the index
- grep a commit (or a tag if it points to a commit)
so that these cases look up .gitattributes at proper paths.
.gitattributes lookup is disabled in all other cases.
Initial-work-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the grep_config() callback is reusable from other configuration
callbacks, call it from git_log_config() so that grep.patterntype
and friends can be used with the commands in the "git log" family.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switching between -E/-G/-P/-F correctly needs a lot more than just
flipping opt->regflags bit these days, and we have a nice helper
function buried in builtin/grep.c for the sole use of "git grep".
Extract it so that "log --grep" family can also use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The configuration handling is a library-ish part of this program,
that is not specific to "git grep" command. It should be reusable
by "log" and others.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grep_config() function takes one instance of grep_opt as its
callback parameter, and populates it by running git_config().
This has three practical implications:
- You have to have an instance of grep_opt already when you call
the configuration, but that is not necessarily always true. You
may be trying to initialize the grep_filter member of rev_info,
but are not ready to call init_revisions() on it yet.
- It is not easy to enhance grep_config() in such a way to make it
cascade to other callback functions to grab other variables in
one call of git_config(); grep_config() can be cascaded into from
other callbacks, but it has to be at the leaf level of a cascade.
- If you ever need to use more than one instance of grep_opt, you
will have to open and read the configuration file(s) every time
you initialize them.
Rearrange the configuration mechanism and model it after how diff
configuration variables are handled. An early call to git_config()
reads and remembers the values taken from the configuration in the
default "template", and a separate call to grep_init() uses this
template to instantiate a grep_opt.
The next step will be to move some of this out of this file so that
the other user of the grep machinery (i.e. "log") can use it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" honored the ignore=dirty settings in .gitmodules but
"git commit" didn't.
* os/commit-submodule-ignore:
commit: pay attention to submodule.$name.ignore in .gitmodules
"git receive-pack" (the counterpart to "git push") did not give
progress output while processing objects it received to the puser
when run over the smart-http protocol.
* jk/receive-pack-unpack-error-to-pusher:
receive-pack: drop "n/a" on unpacker errors
receive-pack: send pack-processing stderr over sideband
receive-pack: redirect unpack-objects stdout to /dev/null
A repository created with "git clone --single" had its fetch
refspecs set up just like a clone without "--single", leading the
subsequent "git fetch" to slurp all the other branches, defeating
the whole point of specifying "only this branch".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
A patch attached as application/octet-stream (e.g. not text/*) were
mishandled, not correctly honoring Content-Transfer-Encoding
(e.g. base64).
* lt/mailinfo-handle-attachment-more-sanely:
mailinfo: don't require "text" mime type for attachments
The idea of the peel_ref function is to dereference tag
objects recursively until we hit a non-tag, and return the
sha1. Conceptually, it should return 0 if it is successful
(and fill in the sha1), or -1 if there was nothing to peel.
However, the current behavior is much more confusing. For a
regular loose ref, the behavior is as described above. But
there is an optimization to reuse the peeled-ref value for a
ref that came from a packed-refs file. If we have such a
ref, we return its peeled value, even if that peeled value
is null (indicating that we know the ref definitely does
_not_ peel).
It might seem like such information is useful to the caller,
who would then know not to bother loading and trying to peel
the object. Except that they should not bother loading and
trying to peel the object _anyway_, because that fallback is
already handled by peel_ref. In other words, the whole point
of calling this function is that it handles those details
internally, and you either get a sha1, or you know that it
is not peel-able.
This patch catches the null sha1 case internally and
converts it into a -1 return value (i.e., there is nothing
to peel). This simplifies callers, which do not need to
bother checking themselves.
Two callers are worth noting:
- in pack-objects, a comment indicates that there is a
difference between non-peelable tags and unannotated
tags. But that is not the case (before or after this
patch). Whether you get a null sha1 has to do with
internal details of how peel_ref operated.
- in show-ref, if peel_ref returns a failure, the caller
tries to decide whether to try peeling manually based on
whether the REF_ISPACKED flag is set. But this doesn't
make any sense. If the flag is set, that does not
necessarily mean the ref came from a packed-refs file
with the "peeled" extension. But it doesn't matter,
because even if it didn't, there's no point in trying to
peel it ourselves, as peel_ref would already have done
so. In other words, the fallback peeling is guaranteed
to fail.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A patch attached as application/octet-stream (e.g. not text/*) were
mishandled, not correctly honoring Content-Transfer-Encoding
(e.g. base64).
* lt/mailinfo-handle-attachment-more-sanely:
mailinfo: don't require "text" mime type for attachments
"gc --auto" notified the user that auto-packing has triggered even
under the "--quiet" option.
* tu/gc-auto-quiet:
silence git gc --auto --quiet output
"git status" honored the ignore=dirty settings in .gitmodules but
"git commit" didn't.
* os/commit-submodule-ignore:
commit: pay attention to submodule.$name.ignore in .gitmodules
Send errors from "unpack-objects" and "index-pack" back to the "git
push" over the git and smart-http protocols, just like it is done
for a push over the ssh protocol.
* jk/receive-pack-unpack-error-to-pusher:
receive-pack: drop "n/a" on unpacker errors
receive-pack: send pack-processing stderr over sideband
receive-pack: redirect unpack-objects stdout to /dev/null
Running "git fetch" in a repository made with "git clone --single"
slurps all the branches, defeating the point of "--single".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
Currently "git am" does insane things if the mbox it is given contains
attachments with a MIME type that aren't "text/*".
In particular, it will still decode them, and pass them "one line at a
time" to the mail body filter, but because it has determined that they
aren't text (without actually looking at the contents, just at the mime
type) the "line" will be the encoding line (eg 'base64') rather than a
line of *content*.
Which then will cause the text filtering to fail, because we won't
correctly notice when the attachment text switches from the commit message
to the actual patch. Resulting in a patch failure, even if patch may be a
perfectly well-formed attachment, it's just that the message type may be
(for example) "application/octet-stream" instead of "text/plain".
Just remove all the bogus games with the message_type. The only difference
that code creates is how the data is passed to the filter function
(chunked per-pred-code line or per post-decode line), and that difference
is *wrong*, since chunking things per pre-decode line can never be a
sensible operation, and cannot possibly matter for binary data anyway.
This code goes all the way back to March of 2007, in commit 87ab799234
("builtin-mailinfo.c infrastrcture changes"), and apparently Don used to
pass random mbox contents to git. However, the pre-decode vs post-decode
logic really shouldn't matter even for that case, and more importantly, "I
fed git am crap" is not a valid reason to break *real* patch attachments.
If somebody really cares, and determines that some attachment is binary
data (by looking at the data, not the MIME-type), the whole attachment
should be dismissed, rather than fed in random-sized chunks to
"handle_filter()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-log-grep-all-match-1:
grep.c: make two symbols really file-scope static this time
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
Currently using "git rm" on a submodule - populated or not - fails with
this error:
fatal: git rm: '<submodule path>': Is a directory
This made sense in the past as there was no way to remove a submodule
without possibly removing unpushed parts of the submodule's history
contained in its .git directory too, so erroring out here protected the
user from possible loss of data.
But submodules cloned with a recent git version do not contain the .git
directory anymore, they use a gitfile to point to their git directory
which is safely stored inside the superproject's .git directory. The work
tree of these submodules can safely be removed without losing history, so
let's teach git to do so.
Using rm on an unpopulated submodule now removes the empty directory from
the work tree and the gitlink from the index. If the submodule's directory
is missing from the work tree, it will still be removed from the index.
Using rm on a populated submodule using a gitfile will apply the usual
checks for work tree modification adapted to submodules (unless forced).
For a submodule that means that the HEAD is the same as recorded in the
index, no tracked files are modified and no untracked files that aren't
ignored are present in the submodules work tree (ignored files are deemed
expendable and won't stop a submodule's work tree from being removed).
That logic has to be applied in all nested submodules too.
Using rm on a submodule which has its .git directory inside the work trees
top level directory will just error out like it did before to protect the
repository, even when forced. In the future git could either provide a
message informing the user to convert the submodule to use a gitfile or
even attempt to do the conversion itself, but that is not part of this
change.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --quiet is requested, gc --auto should not display messages unless
there is an error.
Signed-off-by: Tobias Ulmer <tobiasu@tmux.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git am" is fed an input that has multiple "Content-type: ..."
header, it did not grok charset= attribute correctly.
* jc/maint-mailinfo-mime-attr:
mailinfo: do not concatenate charset= attribute values from mime headers
Even during a conflicted merge, "git blame $path" always meant to
blame uncommitted changes to the "working tree" version; make it
more useful by showing cleanly merged parts as coming from the other
branch that is being merged.
This incidentally fixes an unrelated problem on a case insensitive
filesystem, where "git blame MAKEFILE" run in a history that has
"Makefile" but not "MAKEFILE" did not say "No such file MAKEFILE in
HEAD" but pretended as if "MAKEFILE" was a newly added file.
* jc/maint-blame-no-such-path:
blame: allow "blame file" in the middle of a conflicted merge
blame $path: avoid getting fooled by case insensitive filesystems
"git fetch --all", when passed "--no-tags", did not honor the
"--no-tags" option while fetching from individual remotes (the same
issue existed with "--tags", but combination "--all --tags" makes
much less sense than "--all --no-tags").
* dj/fetch-all-tags:
fetch --all: pass --tags/--no-tags through to each remote
submodule: use argv_array instead of hand-building arrays
fetch: use argv_array instead of hand-building arrays
argv-array: fix bogus cast when freeing array
argv-array: add pop function
"git status" does not list a submodule with uncommitted working tree
files as modified when "submodule.$name.ignore" is set to "dirty" in
in-tree ".gitmodules" file. Both status and commit honor the setting
in $GIT_DIR/config, but "commit" does not pick it up from .gitmodules,
which is inconsistent.
Teach "git commit" to pay attention to the setting in .gitmodules as
well.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you know your history did not have renames, or if you care only
about the history after a large rename that happened some time ago,
"git blame --no-follow $path" is a way to tell the command not to
bother about renames.
When you use -C, the lines that came from the renamed file will
still be found without the whole-file rename detection, so it is not
all that interesting either way, though.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output from git push currently looks like this:
$ git push dest HEAD
fatal: [some message from index-pack]
error: unpack failed: index-pack abnormal exit
To dest
! [remote rejected] HEAD -> master (n/a (unpacker error))
That n/a is meant to be "the per-ref status is not
available" but the nested parentheses just make it look
ugly. Let's turn the final line into just:
! [remote rejected] HEAD -> master (unpacker error)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Receive-pack invokes either unpack-objects or index-pack to
handle the incoming pack. However, we do not redirect the
stderr of the sub-processes at all, so it is never seen by
the client. From the initial thread adding sideband support,
which is here:
http://thread.gmane.org/gmane.comp.version-control.git/139471
it is clear that some messages are specifically kept off the
sideband (with the assumption that they are of interest only
to an administrator, not the client). The stderr of the
subprocesses is mentioned in the thread, but it's unclear if
they are included in that group, or were simply forgotten.
However, there are a few good reasons to show them to the
client:
1. In many cases, they are directly about the incoming
packfile (e.g., fsck warnings with --strict, corruption
in the packfile, etc). Without these messages, the
client just gets "unpacker error" with no extra useful
diagnosis.
2. No matter what the cause, we are probably better off
showing the errors to the client. If the client and the
server admin are not the same entity, it is probably
much easier for the client to cut-and-paste the errors
they see than for the admin to try to dig them out of a
log and correlate them with a particular session.
3. Users of the ssh transport typically already see these
stderr messages, as the remote's stderr is copied
literally by ssh. This brings other transports (http,
and push-over-git if you are crazy enough to enable it)
more in line with ssh. As a bonus for ssh users,
because the messages are now fed through the sideband
and printed by the local git, they will have "remote:"
prepended and be properly interleaved with any local
output to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unpack-objects command should not generally produce any
output on stdout. However, if it's given extra input after
the packfile, it will spew the remainder to stdout. When
called by receive-pack, this means we will break protocol,
since our stdout is connected to the remote send-pack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running "git clone --single", the resulting repository has the
usual default "+refs/heads/*:refs/remotes/origin/*" wildcard fetch
refspec installed, which means that a subsequent "git fetch" will
end up grabbing all the other branches.
Update the fetch refspec to cover only the singly cloned ref instead
to correct this.
That means:
If "--single" is used without "--branch" or "--mirror", the
fetch refspec covers the branch on which remote's HEAD points to.
If "--single" is used with "--branch", it'll cover only the branch
specified in the "--branch" option.
If "--single" is combined with "--mirror", then it'll cover all
refs of the cloned repository.
If "--single" is used with "--branch" that specifies a tag, then
it'll cover only the ref for this tag.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a long-standing bug in "git log --grep" when multiple "--grep"
are used together with "--all-match" and "--author" or "--committer".
* jc/maint-log-grep-all-match:
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
Turn many file-scope private symbols to static to reduce the
global namespace contamination.
* jc/make-static:
sequencer.c: mark a private file-scope symbol as static
ident.c: mark private file-scope symbols as static
trace.c: mark a private file-scope symbol as static
wt-status.c: mark a private file-scope symbol as static
read-cache.c: mark a private file-scope symbol as static
strbuf.c: mark a private file-scope symbol as static
sha1-array.c: mark a private file-scope symbol as static
symlinks.c: mark private file-scope symbols as static
notes.c: mark a private file-scope symbol as static
rerere.c: mark private file-scope symbols as static
graph.c: mark private file-scope symbols as static
diff.c: mark a private file-scope symbol as static
commit.c: mark a file-scope private symbol as static
builtin/notes.c: mark file-scope private symbols as static
After "git cherry-pick -s" gave control back to the user asking
help to resolve conflicts, concluding "git commit" needs to be run
with "-s" if the user wants to sign it off, but the command should
be able to remember that.
* mv/cherry-pick-s:
cherry-pick: don't forget -s on failure
The status report from "git fetch", when messages like 'up-to-date'
are translated, did not align the branch names well.
* nd/fetch-status-alignment:
fetch: align per-ref summary report in UTF-8 locales
The attribute system may be asked for a path that itself or its
leading directories no longer exists in the working tree, and it is
fine if we cannot open .gitattribute file in such a case. Failure
to open per-directory .gitattributes with error status other than
ENOENT and ENOTDIR should be diagnosed.
* jk/config-warn-on-inaccessible-paths:
attr: failure to open a .gitattributes file is OK with ENOTDIR
warn_on_inaccessible(): a helper to warn on inaccessible paths
attr: warn on inaccessible attribute files
gitignore: report access errors of exclude files
config: warn on inaccessible files
* maint:
t/perf: add "trash directory" to .gitignore
Add missing -z to git check-attr usage text for consistency with man page
git-jump: ignore (custom) prefix in diff mode
Documentation: indent-with-non-tab uses "equivalent tabs" not 8
completion: add --no-edit to git-commit
Code simplification and clarification.
* mh/fetch-filter-refs:
test-string-list.c: Fix some sparse warnings
fetch-pack: eliminate spurious error messages
cmd_fetch_pack(): simplify computation of return value
fetch-pack: report missing refs even if no existing refs were received
cmd_fetch_pack(): return early if finish_connect() fails
filter_refs(): simplify logic
filter_refs(): build refs list as we go
filter_refs(): delete matched refs from sought list
fetch_pack(): update sought->nr to reflect number of unique entries
filter_refs(): do not check the same sought_pos twice
Change fetch_pack() and friends to take string_list arguments
fetch_pack(): reindent function decl and defn
Rename static function fetch_pack() to http_fetch_pack()
t5500: add tests of fetch-pack --all --depth=N $URL $REF
t5500: add tests of error output for missing refs
"git blame MAKEFILE" run in a history that has "Makefile" but not
"MAKEFILE" should say "No such file MAKEFILE in HEAD", but got
confused on a case insensitive filesystem and failed to do so.
Even during a conflicted merge, "git blame $path" always meant to
blame uncommitted changes to the "working tree" version; make it
more useful by showing cleanly merged parts as coming from the other
branch that is being merged.
* jc/maint-blame-no-such-path:
blame: allow "blame file" in the middle of a conflicted merge
blame $path: avoid getting fooled by case insensitive filesystems
"Content-type: text/plain; charset=UTF-8" header should not appear
twice in the input, but it is always better to gracefully deal with
such a case. The current code concatenates the value to the values
we have seen previously, producing nonsense such as "utf8UTF-8".
Instead of concatenating, forget the previous value and use the last
value we see.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We strip the prefix from "Re: subject" and also from a less common
"re: subject", but left even less common "RE: subject" intact.
* jc/mailinfo-RE:
mailinfo: strip "RE: " prefix
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
fetch does printf("%-*s", width, "foo") where "foo" can be a utf-8
string, but width is in bytes, not columns. For ASCII it's fine as one
byte takes one column. For utf-8, this may result in misaligned ref
summary table.
Introduce gettext_width() function that returns the string length in
columns (currently only supports utf-8 locales). Make the code use
TRANSPORT_SUMMARY(x) where the length is compensated properly in
non-English locales.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option parsing of "git checkout" had error checking, dwim and
defaulting missing options, all mixed in the code, and issuing an
appropriate error message with useful context was getting harder.
Reorganize the code and allow giving a proper diagnosis when the
user says "git checkout -b -t foo bar" (e.g. "-t" is not a good name
for a branch).
* nd/checkout-option-parsing-fix:
checkout: reorder option handling
checkout: move more parameters to struct checkout_opts
checkout: pass "struct checkout_opts *" as const pointer
"git fetch --all", when passed "--no-tags", did not honor the
"--no-tags" option while fetching from individual remotes (the same
issue existed with "--tags", but combination "--all --tags" makes
much less sense than "--all --no-tags").
* dj/fetch-all-tags:
fetch --all: pass --tags/--no-tags through to each remote
* rj/path-cleanup:
Call mkpathdup() rather than xstrdup(mkpath(...))
Call git_pathdup() rather than xstrdup(git_path("..."))
path.c: Use vsnpath() in the implementation of git_path()
path.c: Don't discard the return value of vsnpath()
path.c: Remove the 'git_' prefix from a file scope function
When threaded grep is in effect, the patterns are duplicated and
recompiled for each thread. Avoid "--debug" output during the
recompilation so that the output is given once instead of "1+nthreads"
times.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our "grep" allows complex boolean expressions to be formed to match
each individual line with operators like --and, '(', ')' and --not.
Introduce the "--debug" option to show the parse tree to help people
who want to debug and enhance it.
Also "log" learns "--grep-debug" option to do the same. The command
line parser to the log family is a lot more limited than the general
"git grep" parser, but it has special handling for header matching
(e.g. "--author"), and a parse tree is valuable when working on it.
Note that "--all-match" is *not* any individual node in the parse
tree. It is an instruction to the evaluator to check all the nodes
in the top-level backbone have matched and reject a document as
non-matching otherwise.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case 'git cherry-pick -s <commit>' failed, the user had to use 'git
commit -s' (i.e. state the -s option again), which is easy to forget
about. Instead, write the signed-off-by line early, so plain 'git
commit' will have the same result.
Also update 'git commit -s', so that in case there is already a relevant
Signed-off-by line before the Conflicts: line, it won't add one more at
the end of the message. If there is no such line, then add it before the
the Conflicts: line.
Signed-off-by: Miklos Vajna <vmiklos@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git apply -p0" did not parse pathnames on "diff --git" line
correctly. This caused patches that had pathnames in no other
places to be mistakenly rejected (most notably, binary patch that
does not rename nor change mode). Textual patches, renames or mode
changes have preimage and postimage pathnames in different places in
a form that can be parsed unambiguously and did not suffer from this
problem.
* jc/apply-binary-p0:
apply: compute patch->def_name correctly under -p0
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
"git for-each-ref" did not honor multiple "--sort=<key>" arguments
correctly.
* kk/maint-for-each-ref-multi-sort:
for-each-ref: Fix sort with multiple keys
t6300: test sort with multiple keys
It used to be that if "--all", "--depth", and also explicit references
were sought, then the explicit references were not handled correctly
in filter_refs() because the "--all --depth" code took precedence over
the explicit reference handling, and the explicit references were
never noted as having been found. So check for explicitly sought
references before proceeding to the "--all --depth" logic.
This fixes two test cases in t5500.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set the final value at initialization rather than initializing it then
sometimes changing it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the logic without changing the behavior.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify flow within loop: first decide whether to keep the reference,
then keep/free it. This makes it clearer that each ref has exactly
two possible destinies, and removes duplication of the code for
appending the reference to the linked list.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of temporarily storing matched refs to temporary array
"return_refs", simply append them to newlist as we go. This changes
the order of references in newlist to strictly sorted if "--all" and
"--depth" and named references are all specified, but that usage is
broken anyway (see the last two tests in t5500).
This changes the last test in t5500 from segfaulting into just
emitting a spurious error (this will be fixed in a moment).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove any references that are available from the remote from the
sought list (rather than overwriting their names with NUL characters,
as previously). Mark matching entries by writing a non-NULL pointer
to string_list_item::util during the iteration, then use
filter_string_list() later to filter out the entries that have been
marked.
Document this aspect of fetch_pack() in a comment in the header file.
(More documentation is obviously still needed.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch_pack() removes duplicates from the "sought" list, thereby
shrinking the list. But previously, the caller was not informed about
the shrinkage. This would cause a spurious error message to be
emitted by cmd_fetch_pack() if "git fetch-pack" is called with
duplicate refnames.
Instead, remove duplicates using string_list_remove_duplicates(),
which adjusts sought->nr to reflect the new length of the list.
The last test of t5500 inexplicably *required* "git fetch-pack" to
fail when fetching a list of references that contains duplicates;
i.e., it insisted on the buggy behavior. So change the test to expect
the correct behavior.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once a match has been found at sought_pos, the entry is zeroed and no
future attempts will match that entry. So increment sought_pos to
avoid checking against the zeroed-out entry during the next iteration.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of juggling <nr_heads,heads> (sometimes called
<nr_match,match>), pass around the list of references to be sought in
a single string_list variable called "sought". Future commits will
make more use of string_list functionality.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git blame file" has always meant "find the origin of each line of
the file in the history leading to HEAD, oh by the way, blame the
lines that are modified locally to the working tree".
This teaches "git blame" that during a conflicted merge, some
uncommitted changes may have come from the other history that is
being merged.
The verify_working_tree_path() function introduced in the previous
patch to notice a typo in the filename (primarily on case insensitive
filesystems) has been updated to allow a filename that does not exist
in HEAD (i.e. the tip of our history) as long as it exists one of the
commits being merged, so that a "we deleted, the other side modified"
case tracks the history of the file in the history of the other side.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout operates in three different modes. On top of that it tries to
be smart by guessing the branch name for switching. This results in
messy option handling code. This patch reorders it so that
- cmd_checkout() is responsible for parsing, preparing input and
determining mode
- Code of each mode is in checkout_paths() and checkout_branch(),
where sanity checks are performed
Another slight improvement is always print branch name (or commit
name) when printing errors related ot them. This helps catch the case
where an option is mistaken as branch/commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use argv-array API in "git fetch" implementation.
* jk/argv-array:
submodule: use argv_array instead of hand-building arrays
fetch: use argv_array instead of hand-building arrays
argv-array: fix bogus cast when freeing array
argv-array: add pop function
Optimise the "merge-base" computation a bit, and also update its
users that do not need the full merge-base information to call a
cheaper subset.
* jc/merge-bases:
reduce_heads(): reimplement on top of remove_redundant()
merge-base: "--is-ancestor A B"
get_merge_bases_many(): walk from many tips in parallel
in_merge_bases(): use paint_down_to_common()
merge_bases_many(): split out the logic to paint history
in_merge_bases(): omit unnecessary redundant common ancestor reduction
http-push: use in_merge_bases() for fast-forward check
receive-pack: use in_merge_bases() for fast-forward check
in_merge_bases(): support only one "other" commit
"git show --format='%ci'" did not give timestamp correctly for
commits created without human readable name on "committer" line.
* jc/maint-ident-missing-human-name:
split_ident_line(): make best effort when parsing author/committer line
* jc/capabilities:
fetch-pack: mention server version with verbose output
parse_feature_request: make it easier to see feature values
fetch-pack: do not ask for unadvertised capabilities
do not send client agent unless server does first
send-pack: fix capability-sending logic
include agent identifier in capability string
"git blame MAKEFILE" run in a history that has "Makefile" but not
MAKEFILE can get confused on a case insensitive filesystem, because
the check we run to see if there is a corresponding file in the
working tree with lstat("MAKEFILE") succeeds. In addition to that
check, we have to make sure that the given path also exists in the
commit we start digging history from (i.e. "HEAD").
Note that this reveals the breakage in a test added in cd8ae20
(git-blame shouldn't crash if run in an unmerged tree, 2007-10-18),
which expects the entire merge-in-progress path to be blamed to the
working tree when it did not exist in our tree. As it is clear in
the log message of that commit, the old breakage was that it was
causing an internal error and the fix was about avoiding it.
Just check that the command does not die an uncontrolled death. For
this particular case, the blame should fail, as the history for the
file in that contents has not been committed yet at the point in the
test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch --set-upstream origin/master" is a common mistake to
create a local branch 'origin/master' and set it to integrate with
the current branch. With a plan to deprecate this option, introduce
"git branch (-u|--set-upstream-to) origin/master" that sets the
current branch to integrate with 'origin/master' remote tracking
branch.
* cn/branch-set-upstream-to:
branch: deprecate --set-upstream and show help if we detect possible mistaken use
branch: add --unset-upstream option
branch: introduce --set-upstream-to
"git cherry-pick A C B" used to replay changes in A and then B and
then C if these three commits had committer timestamps in that
order, which is not what the user who said "A C B" naturally expects.
* mz/cherry-pick-cmdline-order:
cherry-pick/revert: respect order of revisions to pick
demonstrate broken 'git cherry-pick three one two'
teach log --no-walk=unsorted, which avoids sorting
We tried to bend backwards to allow "--quiet" to be a synonym as
"-s" when given as e.g. "git show --quiet", but did not quite
succeed.
* jk/maint-quiet-is-synonym-to-s-in-log:
log: fix --quiet synonym for -s
"git prune" without "-v" used to warn about leftover temporary
files (which is an indication of an earlier aborted operation).
* bc/prune-info:
prune.c: only print informational message in show_only or verbose mode
* maint-1.7.11:
Almost 1.7.11.6
gitweb: URL-decode $my_url/$my_uri when stripping PATH_INFO
rebase -i: use full onto sha1 in reflog
sh-setup: protect from exported IFS
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
setup: clarify error messages for file/revisions ambiguity
send-email: improve RFC2047 quote parsing
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
When "git push" triggered the automatic gc on the receiving end, a
message from "git prune" that said it was removing cruft leaked to
the standard output, breaking the communication protocol.
* bc/receive-pack-stdout-protection:
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
"git diff" had a confusion between taking data from a path in the
working tree and taking data from an object that happens to have
name 0{40} recorded in a tree.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
We already strip the more common Re: and re:, and we do not often
see RE: from saner MUA, but this prefix does exist and gets used
from time to time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "git branch -v" contains "(no branch)" that could be
localized, but the code to align it along with the names of branches
were counting in bytes, not in display columns.
* nd/branch-v-alignment:
branch -v: align even when branch names are in UTF-8
"git apply -p0" did not parse pathnames on "diff --git" line
correctly. This caused patches that had pathnames in no other
places to be mistakenly rejected (most notably, binary patch that
does not rename nor change mode). Textual patches, renames or
mode changes have preimage and postimage pathnames in different
places in a form that can be parsed unambiguously and did not suffer
from this problem.
* jc/apply-binary-p0:
apply: compute patch->def_name correctly under -p0
"git log .." errored out saying it is both rev range and a path when
there is no disambiguating "--" is on the command line. Update the
command line parser to interpret ".." as a path in such a case.
* jc/dotdot-is-parent-directory:
specifying ranges: we did not mean to make ".." an empty set
A lot of i18n mark-up for the help text from "git <cmd> -h".
* nd/i18n-parseopt-help: (66 commits)
Use imperative form in help usage to describe an action
Reduce translations by using same terminologies
i18n: write-tree: mark parseopt strings for translation
i18n: verify-tag: mark parseopt strings for translation
i18n: verify-pack: mark parseopt strings for translation
i18n: update-server-info: mark parseopt strings for translation
i18n: update-ref: mark parseopt strings for translation
i18n: update-index: mark parseopt strings for translation
i18n: tag: mark parseopt strings for translation
i18n: symbolic-ref: mark parseopt strings for translation
i18n: show-ref: mark parseopt strings for translation
i18n: show-branch: mark parseopt strings for translation
i18n: shortlog: mark parseopt strings for translation
i18n: rm: mark parseopt strings for translation
i18n: revert, cherry-pick: mark parseopt strings for translation
i18n: rev-parse: mark parseopt strings for translation
i18n: reset: mark parseopt strings for translation
i18n: rerere: mark parseopt strings for translation
i18n: status: mark parseopt strings for translation
i18n: replace: mark parseopt strings for translation
...
When looking for $HOME/.gitconfig etc., it is OK if we cannot read
them because they do not exist, but we did not diagnose existing
files that we cannot read.
* jk/config-warn-on-inaccessible-paths:
warn_on_inaccessible(): a helper to warn on inaccessible paths
attr: warn on inaccessible attribute files
gitignore: report access errors of exclude files
config: warn on inaccessible files
"git for-each-ref" did not currectly support more than one --sort
option.
* kk/maint-for-each-ref-multi-sort:
for-each-ref: Fix sort with multiple keys
t6300: test sort with multiple keys
Teach "git commit" and "git commit-tree" the "we are told to use
utf-8 in log message, but this does not look like utf-8---attempt to
pass it through convert-from-latin1-to-utf8 and see if it makes
sense" heuristics "git mailinfo" already uses.
* lt/commit-tree-guess-utf-8:
commit/commit-tree: correct latin1 to utf-8
While looking for a way to expand the URL of a remote
that uses a 'url.<name>.insteadOf' config option I stumbled
over the undocumented '--get-url' option of 'git ls-remote'.
This adds some minimum documentation for that option.
And while at it, also add that option to the '-h' output.
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetch is invoked with --all, we need to pass the tag-following
preference to each individual fetch; without this, we will always
auto-follow tags, preventing us from fetching the remote tags into a
remote-specific namespace, for example.
Reported-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Dan Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All remote subcommands are spelled out words except 'rm'. 'rm', being a
popular UNIX command name, may mislead users that there are also 'ls' or
'mv'. Use 'remove' to fit with the rest of subcommands.
'rm' is still supported and used in the test suite. It's just not
widely advertised.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to updating the xstrdup(mkpath(...)) call sites with
mkpathdup(), we also fix a memory leak (in merge_3way()) caused by
neglecting to free the memory allocated to the 'base_name' variable.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to updating the two xstrdup(git_path("...")) call sites
with git_pathdup(), we also fix a memory leak by freeing the memory
allocated to the ADD_EDIT.patch 'file' in the edit_patch() function.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cherry-pick" by default stops when it sees a commit without any
log message. The "--allow-empty-message" option can be used to
silently proceed.
* cw/cherry-pick-allow-empty-message:
cherry-pick: add --allow-empty-message option
The exit status code from "git config" was way overspecified while
being incorrect. Update the implementation to give the documented
status for a case that was documented, and introduce a new code for
"all other errors".
* jc/maint-config-exit-status:
config: "git config baa" should exit with status 1
fetch_populated_submodules() allocates the full argv array it uses to
recurse into the submodules from the number of given options plus the six
argv values it is going to add. It then initializes it with those values
which won't change during the iteration and copies the given options into
it. Inside the loop the two argv values different for each submodule get
replaced with those currently valid.
However, this technique is brittle and error-prone (as the comment to
explain the magic number 6 indicates), so let's replace it with an
argv_array. Instead of replacing the argv values, push them to the
argv_array just before the run_command() call (including the option
separating them) and pop them from the argv_array right after that.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetch invokes itself recursively when recursing into
submodules or handling "fetch --multiple". In both cases, it
builds the child's command line by pushing options onto a
statically-sized array. In both cases, the array is
currently just big enough to handle the largest possible
case. However, this technique is brittle and error-prone, so
let's replace it with a dynamic argv_array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits made by ancient version of Git allowed committer without
human readable name, like this (00213b17c in the kernel history):
tree 6947dba41f8b0e7fe7bccd41a4840d6de6a27079
parent 352dd1df32e672be4cff71132eb9c06a257872fe
author Petr Baudis <pasky@ucw.cz> 1135223044 +0100
committer <sam@mars.ravnborg.org> 1136151043 +0100
kconfig: Remove support for lxdialog --checklist
...
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
When fed such a commit, --format='%ci' fails to parse it, and gives
back an empty string. Update the split_ident_line() to be a bit
more lenient when parsing, but make sure the caller that wants to
pick up sane value from its return value does its own validation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In many scripted Porcelain commands, we find this idiom:
if test "$(git rev-parse --verify A)" = "$(git merge-base A B)"
then
... A is an ancestor of B ...
fi
But you do not have to compute exact merge-base only to see if A is
an ancestor of B. Give them a more direct way to use the underlying
machinery.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When giving multiple individual revisions to cherry-pick or revert, as
in 'git cherry-pick A B' or 'git revert B A', one would expect them to
be picked/reverted in the order given on the command line. They are
instead ordered by their commit timestamp -- in chronological order
for "cherry-pick" and in reverse chronological order for
"revert". This matches the order in which one would usually give them
on the command line, making this bug somewhat hard to notice. Still,
it has been reported at least once before [1].
It seems like the chronological sorting happened by accident because
the revision walker has traditionally always sorted commits in reverse
chronological order when rev_info.no_walk was enabled. In the case of
'git revert B A' where B is newer than A, this sorting is a no-op. For
'git cherry-pick A B', the sorting would reverse the arguments, but
because the sequencer also flips the rev_info.reverse flag when
picking (as opposed to reverting), the end result is a chronological
order. The rev_info.reverse flag was probably flipped so that the
revision walker emits B before C in 'git cherry-pick A..C'; that it
happened to effectively undo the unexpected sorting done when not
walking, was probably a coincidence that allowed this bug to happen at
all.
Fix the bug by telling the revision walker not to sort the commits
when not walking. The only case we want to reverse the order is now
when cherry-picking and walking revisions (rev_info.no_walk = 0).
[1] http://thread.gmane.org/gmane.comp.version-control.git/164794
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git log' is passed the --no-walk option, no revision walk takes
place, naturally. Perhaps somewhat surprisingly, however, the provided
revisions still get sorted by commit date. So e.g 'git log --no-walk
HEAD HEAD~1' and 'git log --no-walk HEAD~1 HEAD' give the same result
(unless the two revisions share the commit date, in which case they
will retain the order given on the command line). As the commit that
introduced --no-walk (8e64006 (Teach revision machinery about
--no-walk, 2007-07-24)) points out, the sorting is intentional, to
allow things like
git log --abbrev-commit --pretty=oneline --decorate --all --no-walk
to show all refs in order by commit date.
But there are also other cases where the sorting is not wanted, such
as
<command producing revisions in order> |
git log --oneline --no-walk --stdin
To accomodate both cases, leave the decision of whether or not to sort
up to the caller, by allowing --no-walk={sorted,unsorted}, defaulting
to 'sorted' for backward-compatibility reasons.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This interface is error prone, and a better one (--set-upstream-to)
exists. Add a message listing the alternatives and suggest how to fix
a --set-upstream invocation in case the user only gives one argument
which causes a local branch with the same name as a remote-tracking
one to be created. The typical case is
git branch --set-upstream origin/master
when the user meant
git branch --set-upstream master origin/master
assuming that the current branch is master. Show a message telling the
user how to undo their action and get what they wanted. For the
command above, the message would be
The --set-upstream flag is deprecated and will be removed. Consider using --track or --set-upstream-to
Branch origin/master set up to track local branch master.
If you wanted to make 'master' track 'origin/master', do this:
git branch -d origin/master
git branch --set-upstream-to origin/master
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have ways of setting the upstream information, but if we want to
unset it, we need to resort to modifying the configuration manually.
Teach branch an --unset-upstream option that unsets this information.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some capabilities were asked by fetch-pack even when upload-pack did
not advertise that they are available. Fix fetch-pack not to do so.
* jc/capabilities:
fetch-pack: mention server version with verbose output
parse_feature_request: make it easier to see feature values
fetch-pack: do not ask for unadvertised capabilities
do not send client agent unless server does first
send-pack: fix capability-sending logic
include agent identifier in capability string
Teach "git prune" without "-v" to be silent about leftover temporary
files.
* bc/prune-info:
prune.c: only print informational message in show_only or verbose mode
Minor code clean-up on the cherry-pick codepath.
* mz/cherry-code-cleanup:
cherry: remove redundant check for merge commit
cherry: don't set ignored rev_info options
remove unnecessary parameter from get_patch_ids()
This struct contains various switches to system and it feels somewhat
safer to have the compiler reassure us that nowhere else changes it.
One field that is changed, writeout_error, is split out and passed as
another argument.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally the "--quiet" option was parsed by the
diff-option parser into the internal QUICK option. This had
the effect of silencing diff output from the log (which was
not intended, but happened to work and people started to
use it). But it also had other odd side effects at the diff
level (for example, it would suppress the second commit in
"git show A B").
To fix this, commit 1c40c36 converted log to parse-options
and handled the "quiet" option separately, not passing it
on to the diff code. However, it simply ignored the option,
which was a regression for people using it as a synonym for
"-s". Commit 01771a8 then fixed that by interpreting the
option to add DIFF_FORMAT_NO_OUTPUT to the list of output
formats.
However, that commit did not fix it in all cases. It sets
the flag after setup_revisions is called. Naively, this
makes sense because you would expect the setup_revisions
parser to overwrite our output format flag if "-p" or
another output format flag is seen.
However, that is not how the NO_OUTPUT flag works. We
actually store it in the bit-field as just another format.
At the end of setup_revisions, we call diff_setup_done,
which post-processes the bitfield and clears any other
formats if we have set NO_OUTPUT. By setting the flag after
setup_revisions is done, diff_setup_done does not have a
chance to make this tweak, and we end up with other format
options still set.
As a result, the flag would have no effect in "git log -p
--quiet" or "git show --quiet". Fix it by setting the
format flag before the call to setup_revisions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original computed merge-base between the old commit and the new
commit and checked if the old commit was a merge base between them,
in order to make sure we are fast-forwarding.
Instead, call in_merge_bases(old, new) which does the same.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In early days of its life, I planned to make it possible to compute
"is a commit contained in all of these other commits?" with this
function, but it turned out that no caller needed it.
Just make it take two commit objects and add a comment to say what
these two functions do.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"grep" learned to use a non-standard pattern type by default if a
configuration variable tells it to.
* js/grep-patterntype-config:
grep: add a grep.patternType configuration setting
When "git push" triggered the automatic gc on the receiving end, a
message from "git prune" that said it was removing cruft leaked to
the standard output, breaking the communication protocol.
* bc/receive-pack-stdout-protection:
receive-pack: do not leak output from auto-gc to standard output
t/t5400: demonstrate breakage caused by informational message from prune
We do not want a link to 0{40} object stored anywhere in our objects.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
In the next major release, we will switch "git push [$there]" that
does not say what to push from the traditional "matching" to the
updated "simple" semantics, that pushes the current branch to the
branch with the same name only when the current branch is set to
integrate with that remote branch (all other cases will error out).
* mm/push-default-switch-warning:
push: start warning upcoming default change for push.default
Branch names are usually in ASCII so they are not the problem. The
problem most likely comes from "(no branch)" translation, which is
in UTF-8 and makes display-width calculation just wrong. Clarify
this by renaming the field "len" in struct ref_item to "width", as
it stores the display-width and is used to compute the width of the
screen needed to show the names of all the branches, and compute the
display width using utf8_strwidth(), not byte-length with strlen().
Update document to mention the fact that we may want ref names in
UTF-8. Encodings that produce invalid UTF-8 are safe as utf8_strwidth()
falls back to strlen(). The ones that incidentally produce valid UTF-8
sequences will cause misalignment.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when "git apply" was written, we made sure that the user can
skip more than the default number of path components (i.e. 1) by
giving "-p<n>", but the logic for doing so was built around the
notion of "we skip N slashes and stop". This obviously does not
work well when running under -p0 where we do not want to skip any,
but still want to skip SP/HT that separates the pathnames of
preimage and postimage and want to reject absolute pathnames.
Stop using "stop_at_slash()", and instead introduce a new helper
"skip_tree_prefix()" with similar logic but works correctly even for
the -p0 case.
This is an ancient bug, but has been masked for a long time because
most of the patches are text and have other clues to tell us the
name of the preimage and the postimage.
Noticed by Colin McCabe.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Either end of revision range operator can be omitted to default to HEAD,
as in "origin.." (what did I do since I forked) or "..origin" (what did
they do since I forked). But the current parser interprets ".." as an
empty range "HEAD..HEAD", and worse yet, because ".." does exist on the
filesystem, we get this annoying output:
$ cd Documentation/howto
$ git log .. ;# give me recent commits that touch Documentation/ area.
fatal: ambiguous argument '..': both revision and filename
Use '--' to separate filenames from revisions
Surely we could say "git log ../" or even "git log -- .." to disambiguate,
but we shouldn't have to.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing --set-uptream option can cause confusion, as it uses the
usual branch convention of assuming a starting point of HEAD if none
is specified, causing
git branch --set-upstream origin/master
to create a new local branch 'origin/master' that tracks the current
branch. As --set-upstream already exists, we can't simply change its
behaviour. To work around this, introduce --set-upstream-to which
accepts a compulsory argument indicating what the new upstream branch
should be and one optinal argument indicating which branch to change,
defaulting to HEAD.
The new options allows us to type
git branch --set-upstream-to origin/master
to set the current branch's upstream to be origin's master.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Somewhere in help usage, we use both "message" and "msg", "command"
and "cmd", "key id" and "key-id". This patch makes all help text from
parseopt use the first form. Clearer and 3 fewer strings for
translators.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a line in the message is not a valid utf-8, "git mailinfo"
attempts to convert it to utf-8 assuming the input is latin1 (and
punt if it does not convert cleanly). Using the same heuristics in
"git commit" and "git commit-tree" lets the editor output be in
latin1 to make the overall system more consistent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before reading a config file, we check "!access(path, R_OK)"
to make sure that the file exists and is readable. If it's
not, then we silently ignore it.
For the case of ENOENT, this is fine, as the presence of the
file is optional. For other cases, though, it may indicate a
configuration error (e.g., not having permissions to read
the file). Let's print a warning in these cases to let the
user know.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The linked list describing sort options was not correctly set up in
opt_parse_sort. In the result, contrary to the documentation, only the
last of multiple --sort options to git-for-each-ref was taken into
account. This commit fixes it.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetch-pack's verbose mode is more of a debugging mode (and
in fact takes two "-v" arguments to trigger via the
porcelain layer). Let's mention the server version as
another possible item of interest.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the same spirit as the previous fix, stop asking for thin-pack, no-progress
and include-tag capabilities when the other end does not claim to support them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit ff5effdf taught both clients and servers of the git protocol
to send an "agent" capability that just advertises their version for
statistics and debugging purposes. The protocol-capabilities.txt
document however indicates that the client's advertisement is
actually a response, and should never include capabilities not
mentioned in the server's advertisement.
Adding the unconditional advertisement in the server programs was
OK, then, but the clients broke the protocol. The server
implementation of git-core itself does not care, but at least one
does: the Google Code git server (or any server using Dulwich), will
hang up with an internal error upon seeing an unknown capability.
Instead, each client must record whether we saw an agent string from
the server, and respond with its agent only if the server mentioned
it first.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we have capabilities to send to the server, we send the
regular "want" line followed by a NUL, then the
capabilities; otherwise, we do not even send the NUL.
However, when checking whether we want to send the "quiet"
capability, we check args->quiet, which is wrong. That flag
only tells us whether the client side wanted to be quiet,
not whether the server supports it (originally, in c207e34f,
it meant both; however, that was later split into two flags
by 01fdc21f).
We still check the right flag when actually printing
"quiet", so this could only have two effects:
1. We might send the trailing NUL when we do not otherwise
need to. In theory, an antique pre-capability
implementation of git might choke on this (since the
client is instructed never to respond with capabilities
that the server has not first advertised).
2. We might also want to send the quiet flag if the
args->progress flag is false, but this code path would
not trigger in that instance.
In practice, it almost certainly never matters. The
report-status capability dates back to 2005. Any real-world
server is going to advertise that, and we will always
respond with at least that capability.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git prune" reports removal of loose object files that are no longer
necessary only under the "-v" option, but unconditionally reports
removal of temporary files that are no longer needed.
The original thinking was that the presence of a leftover temporary
file should be an unusual occurrence that may indicate an earlier
failure of some sort, and the user may want to be reminded of it.
Removing an unnecessary loose object file, on the other hand, is
just part of the normal operation. That is why the former is always
printed out and the latter only when -v is used.
But neither report is particularly useful. Hide both of these
behind the "-v" option for consistency.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard output channel of receive-pack is a structured protocol
channel, and subprocesses must never be allowed to leak anything
into it by writing to their standard output.
Use RUN_COMMAND_STDOUT_TO_STDERR option to run_command_v_opt() just
like we do when running hooks to prevent output from "gc" leaking to
the standard output.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
