* ab/sun-studio-portability:
Appease Sun Studio by renaming "tmpfile"
Fix a bitwise negation assignment issue spotted by Sun Studio
Fix an enum assignment issue spotted by Sun Studio
* rs/diff-tree-combined-clean-up:
submodule: use diff_tree_combined_merge() instead of diff_tree_combined()
pass struct commit to diff_tree_combined_merge()
use struct sha1_array in diff_tree_combined()
* tr/grep-threading:
grep: disable threading in non-worktree case
grep: enable threading with -p and -W using lazy attribute lookup
grep: load funcname patterns for -W
* nd/war-on-nul-in-commit:
commit_tree(): refuse commit messages that contain NULs
Convert commit_tree() to take strbuf as message
merge: abort if fails to commit
Conflicts:
builtin/commit.c
commit.c
commit.h
Advice messages are by definition meant for human end-users, and prime
candidates for i18n/l10n. They tend to also be more verbose to be helpful,
and need to be longer than just one line.
Although we do not have parameterized multi-line advice messages yet, once
we do, we cannot emit such a message like this:
advise(_("Please rename %s to something else"), gostak);
advise(_("so that we can avoid distimming %s unnecessarily."), doshes);
because some translations may need to have the replacement of 'gostak' on
the second line (or 'doshes' on the first line). Some languages may even
need to use three lines in order to fit the same message within a
reasonable width.
Instead, it has to be a single advise() construct, like this:
advise(_("Please rename %s to something else\n"
"so that we can avoid distimming %s unnecessarily."),
gostak, doshes);
Update the advise() function and its existing callers to
- take a format string that can be multi-line and translatable as a
whole;
- use the string and the parameters to form a localized message; and
- show each line in the result with the localization of the "hint: ".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is to give an alternate <name> instead of "origin" to the remote
we are cloning from.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"abbrev" and "commit_format" in struct rev_info get initialized in
init_revisions - no need to reinit in cmd_log_init_defaults.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris the system headers define the "tmpfile" name, which'll
cause Git compiled with Sun Studio 12 Update 1 to whine about us
redefining the name:
"pack-write.c", line 76: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"sha1_file.c", line 2455: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"fast-import.c", line 858: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"builtin/index-pack.c", line 175: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
Just renaming the "tmpfile" variable to "tmp_file" in the relevant
places is the easiest way to fix this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In builtin/fast-export.c we'd assign to variables of the
tag_of_filtered_mode enum type with constants defined for the
signed_tag_mode enum.
We'd get the intended value since both the value we were assigning
with and the one we actually wanted had the same positional within
their respective enums, but doing it this way makes no sense.
This issue was spotted by Sun Studio 12 Update 1:
"builtin/fast-export.c", line 54: warning: enum type mismatch: op "=" (E_ENUM_TYPE_MISMATCH_OP)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris systems we'd warn about an implicit cast of mode_t when we
printed things out with the %d format. We'd get this warning under GCC
4.6.0 with Solaris headers:
builtin/init-db.c: In function ‘separate_git_dir’:
builtin/init-db.c:354:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘mode_t’ [-Wformat]
We've been doing this ever since v1.7.4.1-296-gb57fb80. Just work
around this by adding an explicit cast.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier ed7a42a (commit: teach --amend to carry forward extra headers,
2011-11-08) broke "git merge/pull; edit to fix conflict; git commit"
workflow by forgetting that commit_tree_extended() takes the whole extra
header list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-m-twoway:
checkout_merged(): squelch false warning from some gcc
Test 'checkout -m -- path'
checkout -m: no need to insist on having all 3 stages
* jk/fetch-no-tail-match-refs:
connect.c: drop path_match function
fetch-pack: match refs exactly
t5500: give fully-qualified refs to fetch-pack
drop "match" parameter from get_remote_heads
* nd/resolve-ref:
Rename resolve_ref() to resolve_ref_unsafe()
Convert resolve_ref+xstrdup to new resolve_refdup function
revert: convert resolve_ref() to read_ref_full()
* jn/maint-sequencer-fixes:
revert: stop creating and removing sequencer-old directory
Revert "reset: Make reset remove the sequencer state"
revert: do not remove state until sequence is finished
revert: allow single-pick in the middle of cherry-pick sequence
revert: pass around rev-list args in already-parsed form
revert: allow cherry-pick --continue to commit before resuming
revert: give --continue handling its own function
* jk/maint-mv:
mv: be quiet about overwriting
mv: improve overwrite warning
mv: make non-directory destination error more clear
mv: honor --verbose flag
docs: mention "-k" for both forms of "git mv"
* tr/cache-tree:
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
Maintaining an array of hashes is easier using sha1_array than
open-coding it. This patch also fixes a leak of the SHA1 array
in diff_tree_combined_merge().
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/stream-to-pack:
bulk-checkin: replace fast-import based implementation
csum-file: introduce sha1file_checkpoint
finish_tmp_packfile(): a helper function
create_tmp_packfile(): a helper function
write_pack_header(): a helper function
Conflicts:
pack.h
Measurements by various people have shown that grepping in parallel is
not beneficial when the object store is involved. For example, with a
simple regex:
Threads | --cached case | worktree case
----------------------------------------------------------------
8 (default) | 2.88u 0.21s 0:02.94real | 0.19u 0.32s 0:00.16real
4 | 2.89u 0.29s 0:02.99real | 0.16u 0.34s 0:00.17real
2 | 2.83u 0.36s 0:02.87real | 0.18u 0.32s 0:00.26real
NO_PTHREADS | 2.16u 0.08s 0:02.25real | 0.12u 0.17s 0:00.31real
This happens because all the threads contend on read_sha1_mutex almost
all of the time. A more complex regex allows the threads to do more
work in parallel, but as Jeff King found out, the "super boost" (much
higher clock when only one core is active) feature of recent CPUs
still causes the unthreaded case to win by a large margin.
So until the pack machinery allows unthreaded access, we disable
grep's threading in all but the worktree case.
Helped-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lazily load the userdiff attributes in match_funcname(). Use a
separate mutex around this loading to protect the (not thread-safe)
attributes machinery. This lets us re-enable threading with -p and
-W while reducing the overhead caused by looking up attributes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format_todo() calls get_message(), but uses only the subject line of
the commit message. As a minor optimization, save work and
unnecessary memory allocations by using find_commit_subject() instead.
Also, remove the unnecessary check on cur->item->buffer: the
lookup_commit_reference() call in parse_insn_line() has already made
sure of this.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tolerate extra spaces and tabs as part of the the field separator in
'.git/sequencer/todo', for people with fat fingers.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the instruction sheet format subtly so that the subject of the
commit message that follows the object name is optional. As a result,
an instruction sheet like this is now perfectly valid:
pick 35b0426
pick fbd5bbcbc2e
pick 7362160f
While at it, also fix a bug introduced by 5a5d80f4 (revert: Introduce
--continue to continue the operation, 2011-08-04) that failed to read
lines that are too long to fit on the commit-id-shaped buffer we
currently use; eliminate the need for the buffer altogether. In
addition to literal SHA-1 hexes, you can now safely use expressions
like the following in the instruction sheet:
featurebranch~4
rr/revert-cherry-pick-continue^2~12@{12 days ago}
[jc: simplify parsing]
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Memory allocated to the fields of msg by get_message() isn't freed.
This is potentially a big leak, because fresh memory is allocated to
store the commit message for each commit. Fix this using
free_message().
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There wan't a way for commit_tree() to notice if the message the caller
prepared contained a NUL byte, as it did not take the length of the
message as a parameter. Use a pointer to a strbuf instead, so that we can
either choose to allow low-level plumbing commands to make commits that
contain NUL byte in its message, or forbid NUL everywhere by adding the
check in commit_tree(), in later patches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gcc 4.6.2 (there may be others) does not realize that the variable "mode"
can never be used uninitialized in this function and issues a false warning
under -Wuninitialized option.
Squelch it with an unnecessary initialization; it is not like a single
assignment matters to the performance in this codepath that writes out
to the filesystem with checkout_entry() anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/misc-cleanups:
unpack_object_header_buffer(): clear the size field upon error
tree_entry_interesting: make use of local pointer "item"
tree_entry_interesting(): give meaningful names to return values
read_directory_recursive: reduce one indentation level
get_tree_entry(): do not call find_tree_entry() on an empty tree
tree-walk.c: do not leak internal structure in tree_entry_len()
* maint-1.7.7:
Git 1.7.7.5
Git 1.7.6.5
blame: don't overflow time buffer
fetch: create status table using strbuf
checkout,merge: loosen overwriting untracked file check based on info/exclude
cast variable in call to free() in builtin/diff.c and submodule.c
apply: get rid of useless x < 0 comparison on a size_t type
Conflicts:
Documentation/git.txt
GIT-VERSION-GEN
RelNotes
builtin/fetch.c
When showing the raw timestamp, we format the numeric
seconds-since-epoch into a buffer, followed by the timezone
string. This string has come straight from the commit
object. A well-formed object should have a timezone string
of only a few bytes, but we could be operating on data
pushed by a malicious user.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are determining the list of refs to fetch via
fetch-pack, we have two sets of refs to compare: those on
the remote side, and a "match" list of things we want to
fetch. We iterate through the remote refs alphabetically,
seeing if each one is wanted by the "match" list.
Since def88e9 (Commit first cut at "git-fetch-pack",
2005-07-04), we have used the "path_match" function to do a
suffix match, where a remote ref is considered wanted if
any of the "match" elements is a suffix of the remote
refname.
This enables callers of fetch-pack to specify unqualified
refs and have them matched up with remote refs (e.g., ask
for "A" and get remote's "refs/heads/A"). However, if you
provide a fully qualified ref, then there are corner cases
where we provide the wrong answer. For example, given a
remote with two refs:
refs/foo/refs/heads/master
refs/heads/master
asking for "refs/heads/master" will first match
"refs/foo/refs/heads/master" by the suffix rule, and we will
erroneously fetch it instead of refs/heads/master.
As it turns out, all callers of fetch_pack do provide
fully-qualified refs for the match list. There are two ways
fetch_pack can get match lists:
1. Through the transport code (i.e., via git-fetch)
2. On the command-line of git-fetch-pack
In the first case, we will always be providing the names of
fully-qualified refs from "struct ref" objects. We will have
pre-matched those ref objects already (since we have to
handle more advanced matching, like wildcard refspecs), and
are just providing a list of the refs whose objects we need.
In the second case, users could in theory be providing
non-qualified refs on the command-line. However, the
fetch-pack documentation claims that refs should be fully
qualified (and has always done so since it was written in
2005).
Let's change this path_match call to simply check for string
equality, matching what the callers of fetch_pack are
expecting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_remote_heads function reads the list of remote refs
during git protocol session. It dates all the way back to
def88e9 (Commit first cut at "git-fetch-pack", 2005-07-04).
At that time, the idea was to come up with a list of refs we
were interested in, and then filter the list as we got it
from the remote side.
Later, 1baaae5 (Make maximal use of the remote refs,
2005-10-28) stopped filtering at the get_remote_heads layer,
letting us use the non-matching refs to find common history.
As a result, all callers now simply pass an empty match
list (and any future callers will want to do the same). So
let's drop these now-useless parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a shared buffer and can be
overwritten by the next resolve_ref() calls. Callers need to
pay attention, not to keep the pointer when the next call happens.
Rename with "_unsafe" suffix to warn developers (or reviewers) before
introducing new call sites.
This patch is generated using the following command
git grep -l 'resolve_ref(' -- '*.[ch]'|xargs sed -i 's/resolve_ref(/resolve_ref_unsafe(/g'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tell the user what this command is intended for, and expand the
description of what it does.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user asks us to force a mv and overwrite the
destination, we print a warning. However, since a typical
use would be:
$ git mv one two
fatal: destination exists, source=one, destination=two
$ git mv -f one two
warning: overwriting 'two'
this warning is just noise. We already know we're
overwriting; that's why we gave -f!
This patch silences the warning unless "--verbose" is given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to "git mv" over an existing file, the error
message is fairly informative:
$ git mv one two
fatal: destination exists, source=one, destination=two
When the user forces the overwrite, we give a warning:
$ git mv -f one two
warning: destination exists; will overwrite!
This is less informative, but still sufficient in the simple
rename case, as there is only one rename happening.
But when moving files from one directory to another, it
becomes useless:
$ mkdir three
$ touch one two three/one
$ git add .
$ git mv one two three
fatal: destination exists, source=one, destination=three/one
$ git mv -f one two three
warning: destination exists; will overwrite!
The first message is helpful, but the second one gives us no
clue about what was overwritten. Let's mention the name of
the destination file:
$ git mv -f one two three
warning: overwriting 'three/one'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that "git reset" no longer implicitly removes .git/sequencer that
the operator may or may not have wanted to keep, the logic to write a
backup copy of .git/sequencer and remove it when stale is not needed
any more. Simplify the sequencer API and repository layout by
dropping it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.7.8-rc0~141^2~4 (2011-08-04) explains, git cherry-pick removes
the sequencer state just before applying the final patch. In the
single-pick case, that was a good thing, since --abort and --continue
work fine without access to such state and removing it provides a
signal that git should not complain about the need to clobber it ("a
cherry-pick or revert is already in progress") in sequences like the
following:
git cherry-pick foo
git read-tree -m -u HEAD; # forget that; let's try a different one
git cherry-pick bar
After the recent patch "allow single-pick in the middle of cherry-pick
sequence" we don't need that hack any more. In the new regime, a
traditional "git cherry-pick <commit>" command never looks at
.git/sequencer, so we do not need to cripple "git cherry-pick
<commit>..<commit>" for it any more.
So now you can run "git cherry-pick --abort" near the end of a
multi-pick sequence and it will abort the entire sequence, instead of
misbehaving and aborting just the final commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After messing up a difficult conflict resolution in the middle of a
cherry-pick sequence, it can be useful to be able to
git checkout HEAD . && git cherry-pick that-one-commit
to restart the conflict resolution. The current code however errors out
saying that another cherry-pick is already in progress.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7e2bfd3f (revert: allow cherry-picking more than one commit,
2010-07-02), the pick/revert machinery has kept track of the set of
commits to be cherry-picked or reverted using commit_argc and
commit_argv variables, storing the corresponding command-line
parameters.
Future callers as other commands are built in (am, rebase, sequencer)
may find it easier to pass rev-list options to this machinery in
already-parsed form. Teach cmd_cherry_pick and cmd_revert to parse
the rev-list arguments in advance and pass the commit set to
pick_revisions() as a rev_info structure.
Original patch by Jonathan, tweaks and test from Ram.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git cherry-pick ..bar" encounters conflicts, permit the operator
to use cherry-pick --continue after resolving them as a shortcut for
"git commit && git cherry-pick --continue" to record the resolution
and carry on with the rest of the sequence.
This improves the analogy with "git rebase" (in olden days --continue
was the way to preserve authorship when a rebase encountered
conflicts) and fits well with a general UI goal of making "git cmd
--continue" save humans the trouble of deciding what to do next.
Example: after encountering a conflict from running "git cherry-pick
foo bar baz":
CONFLICT (content): Merge conflict in main.c
error: could not apply f78a8d98c... bar!
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit'
We edit main.c to resolve the conflict, mark it acceptable with "git
add main.c", and can run "cherry-pick --continue" to resume the
sequence.
$ git cherry-pick --continue
[editor opens to confirm commit message]
[master 78c8a8c98] bar!
1 files changed, 1 insertions(+), 1 deletions(-)
[master 87ca8798c] baz!
1 files changed, 1 insertions(+), 1 deletions(-)
This is done for both codepaths to pick multiple commits and a single
commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes pick_revisions() a little shorter and easier to read
straight through.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you try to "git mv" multiple files onto another
non-directory file, you confusingly get the "usage" message:
$ touch one two three
$ git add .
$ git mv one two three
usage: git mv [options] <source>... <destination>
[...]
From the user's perspective, that makes no sense. They just
gave parameters that exactly match that usage!
This behavior dates back to the original C version of "git
mv", which had a usage message like:
usage: git mv (<source> <destination> | <source>... <destination>)
This was slightly less confusing, because it at least
mentions that there are two ways to invoke (but it still
isn't clear why what the user provided doesn't work).
Instead, let's show an error message like:
$ git mv one two three
fatal: destination 'three' is not a directory
We could leave the usage message in place, too, but it
doesn't actually help here. It contains no hints that there
are two forms, nor that multi-file form requires that the
endpoint be a directory. So it just becomes useless noise
that distracts from the real error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for a verbose flag has been here since "git mv" was
converted to C many years ago, but actually getting the "-v"
flag from the command line was accidentally lost in the
transition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the follow up of c689332 (Convert many resolve_ref() calls to
read_ref*() and ref_exists() - 2011-11-13). See the said commit for
rationale.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fetch from a remote, we print a status table like:
From url
* [new branch] foo -> origin/foo
We create this table in a static buffer using sprintf. If
the remote refnames are long, they can overflow this buffer
and smash the stack.
Instead, let's use a strbuf to build the string.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/resolve-ref:
Copy resolve_ref() return value for longer use
Convert many resolve_ref() calls to read_ref*() and ref_exists()
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
refs.c
* jc/pull-signed-tag:
commit-tree: teach -m/-F options to read logs from elsewhere
commit-tree: update the command line parsing
commit: teach --amend to carry forward extra headers
merge: force edit and no-ff mode when merging a tag object
commit: copy merged signed tags to headers of merge commit
merge: record tag objects without peeling in MERGE_HEAD
merge: make usage of commit->util more extensible
fmt-merge-msg: Add contents of merged tag in the merge message
fmt-merge-msg: package options into a structure
fmt-merge-msg: avoid early returns
refs DWIMmery: use the same rule for both "git fetch" and others
fetch: allow "git fetch $there v1.0" to fetch a tag
merge: notice local merging of tags and keep it unwrapped
fetch: do not store peeled tag object names in FETCH_HEAD
Split GPG interface into its own helper library
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
* jc/request-pull-show-head-4:
request-pull: use the annotated tag contents
fmt-merge-msg.c: Fix an "dubious one-bit signed bitfield" sparse error
environment.c: Fix an sparse "symbol not declared" warning
builtin/log.c: Fix an "Using plain integer as NULL pointer" warning
fmt-merge-msg: use branch.$name.description
request-pull: use the branch description
request-pull: state what commit to expect
request-pull: modernize style
branch: teach --edit-description option
format-patch: use branch description in cover letter
branch: add read_branch_desc() helper function
Conflicts:
builtin/branch.c
Normally git tag strips tag message lines starting with '#', trailing
spaces from every line and empty lines from the beginning and end.
--cleanup allows to select different cleanup modes for tag message.
It provides the same interface as --cleanup option in git-commit.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After making fixes to the contents to be committed, it is not unusual to
update the current commit without rewording the message. Idioms to tell
"commit --amend" that we do not need an editor have been:
$ EDITOR=: git commit --amend
$ git commit --amend -C HEAD
but that was only because a more natural "--no-edit" option in
$ git commit --amend --no-edit
was not honoured.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of --mixed and --hard, we throw away the old index and
rebuild everything from the tree argument (or HEAD). So we have an
opportunity here to fill in the cache-tree data, just as read-tree
did.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In prepare_index(), we refresh the index, and then write it to disk if
this changed the index data. After running hooks we re-read the index
and compute the root tree sha1 with the cache-tree machinery.
This gives us a mostly free opportunity to write up-to-date cache-tree
data: we can compute it in prepare_index() immediately before writing
the index to disk.
If we do this, we were going to write the index anyway, and the later
cache-tree update has no further work to do. If we don't do it, we
don't do any extra work, though we still don't have have cache-tree
data after the commit.
The only case that suffers badly is when the pre-commit hook changes
many trees in the index. I'm writing this off as highly unusual.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll need to safely create or update the cache-tree data of the_index
from other places. While at it, give it an argument that lets us
silence the messages produced by unmerged entries (which prevent it
from working).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The content level merge machinery ll_merge() is prepared to merge
correctly in "both sides added differently" case by using an empty blob as
if it were the common ancestor. "checkout -m" could do the same, but didn't
bother supporting it and instead insisted on having all three stages.
Reported-by: Pete Harlan
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a static buffer. Callers that
use this value longer than a couple of statements should copy the
value to avoid some hidden resolve_ref() call that may change the
static buffer's value.
The bug found by Tony Wang <wwwjfy@gmail.com> in builtin/merge.c
demonstrates this. The first call is in cmd_merge()
branch = resolve_ref("HEAD", head_sha1, 0, &flag);
Then deep in lookup_commit_or_die() a few lines after, resolve_ref()
may be called again and destroy "branch".
lookup_commit_or_die
lookup_commit_reference
lookup_commit_reference_gently
parse_object
lookup_replace_object
do_lookup_replace_object
prepare_replace_object
for_each_replace_ref
do_for_each_ref
get_loose_refs
get_ref_dir
get_ref_dir
resolve_ref
All call sites are checked and made sure that xstrdup() is called if
the value should be saved.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/fsck-progress:
fsck: print progress
fsck: avoid reading every object twice
verify_packfile(): check as many object as possible in a pack
fsck: return error code when verify_pack() goes wrong
* nd/misc-cleanups:
unpack_object_header_buffer(): clear the size field upon error
tree_entry_interesting: make use of local pointer "item"
tree_entry_interesting(): give meaningful names to return values
read_directory_recursive: reduce one indentation level
get_tree_entry(): do not call find_tree_entry() on an empty tree
tree-walk.c: do not leak internal structure in tree_entry_len()
The comment on top of stripspace() claims that the buffer
will no longer be NUL-terminated. However, this has not been
the case at least since the move to using strbuf in 2007.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git apply is passed something that is not a patch, it does not produce
an error message or exit with a non-zero status if it was not actually
"applying" the patch i.e. --check or --numstat etc were supplied on the
command line.
Fix this by producing an error when apply fails to find any hunks whatsoever
while parsing the patch.
This will cause some of the output formats (--numstat, --diffstat, etc) to
produce an error when they formerly would have reported zero changes and
exited successfully. That seems like the correct behavior though. Failure
to recognize the input as a patch should be an error.
Plus, add a test.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This extends the earlier approach to stream a large file directly from the
filesystem to its own packfile, and allows "git add" to send large files
directly into a single pack. Older code used to spawn fast-import, but the
new bulk-checkin API replaces it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When on master, "git checkout -B master <commit>" is a more natural way to
say "git reset --keep <commit>", which was originally invented for the
exact purpose of moving to the named commit while keeping the local changes
around.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Overwriting the current branch with a different commit is forbidden, as it
will make the status recorded in the index and the working tree out of
sync with respect to the HEAD. There however is no reason to forbid it if
the current branch is renamed to itself, which admittedly is something
only an insane user would do, but is handy for scripts.
Test script is by Conrad Irwin.
Reported-by: Soeren Sonnenburg <sonne@debian.org>
Reported-by: Josh Chia (谢任中)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ignored files usually are generated files (e.g. .o files) and can be
safely discarded. However sometimes users may have important files in
working directory, but still want a clean "git status", so they mark
them as ignored files. But in this case, these files should not be
overwritten without asking first.
Enable this use case with --no-overwrite-ignore, where git only sees
tracked and untracked files, no ignored files. Those who mix
discardable ignored files with important ones may have to sort it out
themselves.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in 1127148 (Loosen "working file will be lost" check in
Porcelain-ish - 2006-12-04), git-checkout.sh learned to quietly
overwrite ignored files. Howver the code only took .gitignore files
into account.
Standard ignored files include all specified in .gitignore files in
working directory _and_ $GIT_DIR/info/exclude. This patch makes sure
ignored files in info/exclude can also be overwritten automatically in
the spirit of the original patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option --force should not put us in 'create branch' mode. The
fact that this option is only valid in 'create branch' mode is
already caught by the the next 'if' in which we assure that we
are in the correct mode.
Without this patch, "git branch -f" without any other argument ends
up calling create_branch without any branch name.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git cherry-pick --abort" command currently renames the
.git/sequencer directory to .git/sequencer-old instead of removing it
on success due to an accident. cherry-pick --abort is designed to
work in three steps:
1) find which commit to roll back to
2) call "git reset --merge <commit>" to move to that commit
3) remove the .git/sequencer directory
But the careless author forgot step 3 entirely. The only reason the
command worked anyway is that "git reset --merge <commit>" renames the
.git/sequencer directory as a secondary effect --- after moving to
<commit>, or so the logic goes, it is unlikely but possible that the
caller of git reset wants to continue the series of cherry-picks that
was in progress, so git renames the sequencer state to
.git/sequencer-old to be helpful while allowing the cherry-pick to be
resumed if the caller did not want to end the sequence after all.
By running "git cherry-pick --abort", the operator has clearly
indicated that she is not planning to continue cherry-picking. Remove
the (renamed) .git/sequencer directory as intended all along.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, it is not possible to rename or remove a directory that has
open files. 'revert --abort' renamed .git/sequencer when it still had
.git/sequencer/head open. Close the file as early as possible to allow
the rename operation on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the following warning.
CC builtin/revert.o
builtin/revert.c: In function ‘write_cherry_pick_head’:
builtin/revert.c:311: warning: format not a string literal and no format arguments
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "git cherry-pick --reset" option, which has a different
preferred spelling nowadays ("--quit"). Luckily the old --reset name
was not around long enough for anyone to get used to it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running some ill-advised command like "git cherry-pick
HEAD..linux-next", the bewildered novice may want to return to more
familiar territory. Introduce a "git cherry-pick --abort" command
that rolls back the entire cherry-pick sequence and places the
repository back on solid ground.
Just like "git merge --abort", this internally uses "git reset
--merge", so local changes not involved in the conflict resolution are
preserved.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When conflicts are encountered while reverting a commit, it can be
handy to have the name of that commit easily available. For example,
to produce a copy of the patch to refer to while resolving conflicts:
$ git revert 2eceb2a8
error: could not revert 2eceb2a8... awesome, buggy feature
$ git show -R REVERT_HEAD >the-patch
$ edit $(git diff --name-only)
Set a REVERT_HEAD pseudoref when "git revert" does not make a commit,
for cases like this. This also makes it possible for scripts to
distinguish between a revert that encountered conflicts and other
sources of an unmerged index.
After successfully committing, resetting with "git reset", or moving
to another commit with "git checkout" or "git reset", the pseudoref is
no longer useful, so remove it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the spirit of v1.6.3.3~3^2 (refuse to merge during a merge,
2009-07-01), "git cherry-pick" refuses to start a new cherry-pick when
in the middle of an existing conflicted cherry-pick in the following
sequence:
1. git cherry-pick HEAD..origin
2. resolve conflicts
3. git cherry-pick HEAD..origin (instead of "git cherry-pick
--continue", by mistake)
Good. However, the error message on attempting step 3 is more
convoluted than necessary:
$ git cherry-pick HEAD..origin
error: .git/sequencer already exists.
error: A cherry-pick or revert is in progress.
hint: Use --continue to continue the operation
hint: or --quit to forget about it
fatal: cherry-pick failed
Clarify by removing the redundant first "error:" message, simplifying
the advice, and using lower-case and no full stops to be consistent
with other commands that prefix their messages with "error:", so it
becomes
error: a cherry-pick or revert is already in progress
hint: try "git cherry-pick (--continue | --quit)"
fatal: cherry-pick failed
The "fatal: cherry-pick failed" line seems unnecessary, too, but
that can be fixed some other day.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deal completely with "cherry-pick --quit" and --continue at the
beginning of pick_revisions(), leaving the rest of the function for
the more interesting "git cherry-pick <commits>" case.
No functional change intended. The impact is just to unindent the
code a little.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option to "git cherry-pick" and "git revert" to discard the
sequencer state introduced by v1.7.8-rc0~141^2~6 (revert: Introduce
--reset to remove sequencer state, 2011-08-04) has a confusing name.
Change it now, while we still have the time.
The new name for "cherry-pick, please get out of my way, since I've
long forgotten about the sequence of commits I was cherry-picking when
you wrote that old .git/sequencer directory" is --quit. Mnemonic:
this is analagous to quiting a program the user is no longer using ---
we just want to get out of the multiple-command cherry-pick procedure
and not to reset HEAD or rewind any other old state.
The "--reset" option is kept as a synonym to minimize the impact. We
might consider dropping it for simplicity in a separate patch, though.
Adjust documentation and tests to use the newly preferred name (--quit)
instead of --reset. While at it, let's clarify the short descriptions
of these operations in "-h" output.
Before:
--reset forget the current operation
--continue continue the current operation
After:
--quit end revert or cherry-pick sequence
--continue resume revert or cherry-pick sequence
Noticed-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The POSIX-function fork is not supported on Windows. Use our
start_command API instead, respawning ourselves in a special
"writer" mode to follow the alternate code path.
Remove the NOT_MINGW-prereq for t5000, as git-archive --remote
now works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git merge' can be called without any arguments if merge.defaultToUpstream
is set. However, when merge.defaultToUpstream is not set, the user will be
presented the usage information as if he entered a command with a wrong
syntaxis. Ironically, the usage information confirms that no arguments are
mandatory.
This adds a proper error message telling the user why the command failed. As
a side-effect this can help the user in discovering the possibility to merge
with the upstream branch by setting merge.defaultToUpstream.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because git_path() calls vsnprintf(), code like
fd = open(git_path("SQUASH_MSG"), O_WRONLY | O_CREAT, 0666);
die_errno(_("Could not write to '%s'"), git_path("SQUASH_MSG"));
can end up printing an error indicator from vsnprintf() instead of
open() by mistake. Store the path we are trying to write to in a
temporary variable and pass _that_ to die_errno(), so the messages
written by git cherry-pick/revert and git merge can avoid this source
of confusion.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --reuse-delta is in effect (which is the default), and an existing
pack in the repository has the same object registered twice (e.g. one copy
in a non-delta format and the other copy in a delta against some other
object), an attempt to repack the repository can result in a cyclic delta
dependency, causing write_one() function to infinitely recurse into
itself.
Detect such a case and break the loopy dependency by writing out an object
that is involved in such a loop in the non-delta format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive-pack & fetch-pack are run and store the pack obtained over
the wire to a local repository, they internally run the index-pack command
with the --strict option. Make sure that we reject incoming packfile that
records objects twice to avoid spreading such a damage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the fatal messages printed by revert and cherry-pick look ugly
like the following:
fatal: Could not open .git/sequencer/todo.: No such file or directory
The culprit here is that these callers of the die_errno() function did not
take it into account that the message string they give to it is followed
by ": <strerror>", hence the message typically should not end with the
full-stop.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a static buffer, which is not
safe for long-term use because if another resolve_ref() call happens,
the buffer may be changed. Many call sites though do not care about
this buffer. They simply check if the return value is NULL or not.
Convert all these call sites to new wrappers to reduce resolve_ref()
calls from 57 to 34. If we change resolve_ref() prototype later on
to avoid passing static buffer out, this helps reduce changes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses the gpg-interface.[ch] to allow signing the commit, i.e.
$ git commit --gpg-sign -m foo
You need a passphrase to unlock the secret key for
user: "Junio C Hamano <gitster@pobox.com>"
4096-bit RSA key, ID 96AFE6CB, created 2011-10-03 (main key ID 713660A7)
[master 8457d13] foo
1 files changed, 1 insertions(+), 0 deletions(-)
The lines of GPG detached signature are placed in a new multi-line header
field, instead of tucking the signature block at the end of the commit log
message text (similar to how signed tag is done), for multiple reasons:
- The signature won't clutter output from "git log" and friends if it is
in the extra header. If we place it at the end of the log message, we
would need to teach "git log" and friends to strip the signature block
with an option.
- Teaching new versions of "git log" and "gitk" to optionally verify and
show signatures is cleaner if we structurally know where the signature
block is (instead of scanning in the commit log message).
- The signature needs to be stripped upon various commit rewriting
operations, e.g. rebase, filter-branch, etc. They all already ignore
unknown headers, but if we place signature in the log message, all of
these tools (and third-party tools) also need to learn how a signature
block would look like.
- When we added the optional encoding header, all the tools (both in tree
and third-party) that acts on the raw commit object should have been
fixed to ignore headers they do not understand, so it is not like that
new header would be more likely to break than extra text in the commit.
A commit made with the above sample sequence would look like this:
$ git cat-file commit HEAD
tree 3cd71d90e3db4136e5260ab54599791c4f883b9d
parent b87755351a47b09cb27d6913e6e0e17e6254a4d4
author Junio C Hamano <gitster@pobox.com> 1317862251 -0700
committer Junio C Hamano <gitster@pobox.com> 1317862251 -0700
gpgsig -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iQIcBAABAgAGBQJOjPtrAAoJELC16IaWr+bL4TMP/RSe2Y/jYnCkds9unO5JEnfG
...
=dt98
-----END PGP SIGNATURE-----
foo
but "git log" (unless you ask for it with --pretty=raw) output is not
cluttered with the signature information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have kept the original "git commit-tree <tree> -p <parent> ..." syntax
forever, but "git commit-tree -p <parent> -p <parent> ... <tree>" would be
more intuitive way to spell it. Dashed flags along with their arguments
come first and then the "thing" argument after the flags.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running "git pull $there for-linus" to merge a signed tag, the
integrator may need to amend the resulting merge commit to fix typoes
in it. Teach --amend option to read the existing extra headers, and
carry them forward.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we allow pulling a tag from the remote site to validate the
authenticity, we should give the user the final chance to verify and edit
the merge message. The integrator is expected to leave a meaningful merge
commit log in the history. Disallow fast-forwarding in such a case to
ensure that a merge commit is always recorded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now MERGE_HEAD records the tag objects without peeling, we could record
the result of manual conflict resolution via "git commit" without losing
the tag information. Introduce a new "mergetag" multi-line header field to
the commit object, and use it to store the entire contents of each signed
tag merged.
A commit header that has a multi-line payload begins with the header tag
(e.g. "mergetag" in this case), SP, the first line of payload, LF, and all
the remaining lines have a SP inserted at the beginning.
In hindsight, it would have been better to make "merge --continue" as the
way to continue from such an interrupted merge, not "commit", but this is
a backward compatibility baggage we would need to carry around for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dm/pack-objects-update:
pack-objects: don't traverse objects unnecessarily
pack-objects: rewrite add_descendants_to_write_order() iteratively
pack-objects: use unsigned int for counter and offset values
pack-objects: mark add_to_write_order() as inline
Otherwise, "git commit" wouldn't have a way to tell that we were in the
middle of merging an annotated or signed tag, not a plain commit, after
"git merge" stops to ask the user to resolve conflicts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-recursive code uses the commit->util field directly to annotate
the commit objects given from the command line, i.e. the remote heads to
be merged, with a single string to be used to describe it in its trace
messages and conflict markers.
Correct this short-signtedness by redefining the field to be a pointer to
a structure "struct merge_remote_desc" that later enhancements can add
more information. Store the original objects we were told to merge in a
field "obj" in this struct, so that we can recover the tag we were told to
merge.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a contributor asks the integrator to merge her history, a signed tag
can be a good vehicle to communicate the authenticity of the request while
conveying other information such as the purpose of the topic.
E.g. a signed tag "for-linus" can be created, and the integrator can run:
$ git pull git://example.com/work.git/ for-linus
This would allow the integrator to run "git verify-tag FETCH_HEAD" to
validate the signed tag.
Update fmt-merge-msg so that it pre-fills the merge message template with
the body (but not signature) of the tag object to help the integrator write
a better merge message, in the same spirit as the existing merge.log summary
lines.
The message that comes from GPG signature validation is also included in
the merge message template to help the integrator verify it, but they are
prefixed with "#" to make them comments.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prune already shows progress meter while pruning. The marking part may
take a few seconds or more, depending on repository size. Show
progress meter during this time too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2564aa4 started to initialize buf.alloc, but that should actually be one
more byte than the string length due to the trailing \0. Also, do not
modify buf.alloc out of the strbuf code. Use the existing strbuf_attach
instead.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In various places in the codepath, the program tries to return early
assuming there is no more work needed. That is generally untrue when
over time new features are added.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also updates the autogenerated merge title message from "merge commit X"
to "merge tag X", and its effect can be seen in the changes to the test suite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bad copy-paste.
Otherwise "git remote set-branches" without necessary argument
will result in an error message and help for set-url subcommand.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsck is usually a long process and it would be nice if it prints
progress from time to time.
Progress meter is not printed when --verbose is given because
--verbose prints a lot, there's no need for "alive" indicator.
Progress meter may provide "% complete" information but it would
be lost anyway in the flood of text.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During verify_pack() all objects are read for SHA-1 check. Then
fsck_sha1() is called on every object, which read the object again
(fsck_sha1 -> parse_object -> read_sha1_file).
Avoid reading an object twice, do fsck_sha1 while we have an object
uncompressed data in verify_pack.
On git.git, with this patch I got:
$ /usr/bin/time ./git fsck >/dev/null
98.97user 0.90system 1:40.01elapsed 99%CPU (0avgtext+0avgdata 616624maxresident)k
0inputs+0outputs (0major+194186minor)pagefaults 0swaps
Without it:
$ /usr/bin/time ./git fsck >/dev/null
231.23user 2.35system 3:53.82elapsed 99%CPU (0avgtext+0avgdata 636688maxresident)k
0inputs+0outputs (0major+461629minor)pagefaults 0swaps
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both of these free() calls are freeing a "const unsigned char (*)[20]"
type while free() expects a "void *". This results in the following
warning under clang 2.9:
builtin/diff.c:185:7: warning: passing 'const unsigned char (*)[20]' to parameter of type 'void *' discards qualifiers
free(parent);
^~~~~~
submodule.c:394:7: warning: passing 'const unsigned char (*)[20]' to parameter of type 'void *' discards qualifiers
free(parents);
^~~~~~~
This free()-ing without a cast was added by Jim Meyering to
builtin/diff.c in v1.7.6-rc3~4 and later by Fredrik Gustafsson in
submodule.c in v1.7.7-rc1~25^2.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the C standard size_t is always unsigned, therefore the
comparison "n1 < 0 || n2 < 0" when n1 and n2 are size_t will always be
false.
This was raised by clang 2.9 which throws this warning when compiling
apply.c:
builtin/apply.c:253:9: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
if (n1 < 0 || n2 < 0)
~~ ^ ~
builtin/apply.c:253:19: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
if (n1 < 0 || n2 < 0)
~~ ^ ~
This check was originally added in v1.6.5-rc0~53^2 by Giuseppe Bilotta
while adding an option to git-apply to ignore whitespace differences.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not want to record tags as parents of a merge when the user does
"git pull $there tag v1.0" to merge tagged commit, but that is not a good
enough excuse to peel the tag down to commit when storing in FETCH_HEAD.
The caller of underlying "git fetch $there tag v1.0" may have other uses
of information contained in v1.0 tag in mind.
[jc: the test adjustment is to update for the new expectation]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mostly moves existing code from builtin/tag.c (for signing)
and builtin/verify-tag.c (for verifying) to a new gpg-interface.c
file to provide a more generic library interface.
- sign_buffer() takes a payload strbuf, a signature strbuf, and a signing
key, runs "gpg" to produce a detached signature for the payload, and
appends it to the signature strbuf. The contents of a signed tag that
concatenates the payload and the detached signature can be produced by
giving the same strbuf as payload and signature strbuf.
- verify_signed_buffer() takes a payload and a detached signature as
<ptr, len> pairs, and runs "gpg --verify" to see if the payload matches
the signature. It can optionally capture the output from GPG to allow
the callers to pretty-print it in a way more suitable for their
contexts.
"verify-tag" (aka "tag -v") used to save the whole tag contents as if it
is a detached signature, and fed gpg the payload part of the tag. It
relied on gpg to fail when the given tag is not signed but just is
annotated. The updated run_gpg_verify() function detects the lack of
detached signature in the input, and errors out without bothering "gpg".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing to delete a ref, it uses 0{40} as an object name to signal
that the request is a deletion. We shouldn't trigger "deletion of a
corrupt ref" warning in such a case, which was designed to notice that a
ref points at an object that is truly missing from the repository.
Reported-by: Stefan Näwe
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify the option parsing heuristic to handle all -m (rename) cases,
including the no-arg case.
Previously, this "fell through" to the (argc <= 2) case and caused
segfault.
Reported-by: Stefan Näwe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cn/fetch-prune:
fetch: treat --tags like refs/tags/*:refs/tags/* when pruning
fetch: honor the user-provided refspecs when pruning refs
remote: separate out the remote_find_tracking logic into query_refspecs
t5510: add tests for fetch --prune
fetch: free all the additional refspecs
* ss/blame-textconv-fake-working-tree:
(squash) test for previous
blame.c: Properly initialize strbuf after calling, textconv_object()
Conflicts:
t/t8006-blame-textconv.sh
* ef/mingw-upload-archive:
mingw: poll.h is no longer in sys/
upload-archive: use start_command instead of fork
compat/win32/poll.c: upgrade from upstream
mingw: move poll out of sys-folder
* dm/pack-objects-update:
pack-objects: don't traverse objects unnecessarily
pack-objects: rewrite add_descendants_to_write_order() iteratively
pack-objects: use unsigned int for counter and offset values
pack-objects: mark add_to_write_order() as inline
The POSIX-function fork is not supported on Windows. Use our
start_command API instead.
As this is the last call-site that depends on the fork-stub in
compat/mingw.h, remove that as well.
Add an undocumented flag to git-archive that tells it that the
action originated from a remote, so features can be disabled.
Thanks to Jeff King for work on this part.
Remove the NOT_MINGW-prereq for t5000, as git-archive --remote
now works.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out a small logic out of the private write_pack_file() function
in builtin/pack-objects.c.
This changes the order of finishing multi-pack generation slightly. The
code used to
- adjust shared perm of temporary packfile
- rename temporary packfile to the final name
- update mtime of the packfile under the final name
- adjust shared perm of temporary idxfile
- rename temporary idxfile to the final name
but because the helper does not want to do the mtime thing, the updated
code does that step first and then all the rest.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a plain string where only the length is known, strbuf.alloc needs to
be initialized to the length. Otherwise strbuf.alloc is 0 and a later
call to strbuf_setlen() will fail.
This bug surfaced when calling git blame under Windows on a *.doc file.
The *.doc file is converted to plain text by antiword via the textconv
mechanism. However, the plain text returned by antiword contains DOS line
endings instead of Unix line endings which triggered the strbuf_setlen()
which previous to this patch failed.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/grep-mutex:
builtin/grep: simplify lock_and_read_sha1_file()
builtin/grep: make lock/unlock into static inline functions
git grep: be careful to use mutexes only when they are initialized
Without this patch,
$ git clone foo .
results in this:
Cloning into ....
done.
With it:
Cloning into '.'...
done.
Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a basic code hygiene to avoid magic constants that are unnamed.
Besides, this helps extending the value later on for "interesting, but
cannot decide if the entry truely matches yet" (ie. prefix matches)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tree_entry_len() does not simply take two random arguments and return
a tree length. The two pointers must point to a tree item structure,
or struct name_entry. Passing random pointers will return incorrect
value.
Force callers to pass struct name_entry instead of two pointers (with
hope that they don't manually construct struct name_entry themselves)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cn/fetch-prune:
fetch: treat --tags like refs/tags/*:refs/tags/* when pruning
fetch: honor the user-provided refspecs when pruning refs
remote: separate out the remote_find_tracking logic into query_refspecs
t5510: add tests for fetch --prune
fetch: free all the additional refspecs
Conflicts:
remote.c
* jk/argv-array:
run_hook: use argv_array API
checkout: use argv_array API
bisect: use argv_array API
quote: provide sq_dequote_to_argv_array
refactor argv_array into generic code
quote.h: fix bogus comment
add sha1_array API docs
* maint-1.7.6:
notes_merge_commit(): do not pass temporary buffer to other function
gitweb: Fix links to lines in blobs when javascript-actions are enabled
mergetool: no longer need to save standard input
mergetool: Use args as pathspec to unmerged files
t9159-*.sh: skip for mergeinfo test for svn <= 1.4
date.c: Support iso8601 timezone formats
remote: only update remote-tracking branch if updating refspec
remote rename: warn when refspec was not updated
remote: "rename o foo" should not rename ref "origin/bar"
remote: write correct fetch spec when renaming remote 'remote'
* mz/remote-rename:
remote: only update remote-tracking branch if updating refspec
remote rename: warn when refspec was not updated
remote: "rename o foo" should not rename ref "origin/bar"
remote: write correct fetch spec when renaming remote 'remote'
Rather nasty things happen when a mutex is not initialized but locked
nevertheless. Now, when we're not running in a threaded manner, the mutex
is not initialized, which is correct. But then we went and used the mutex
anyway, which -- at least on Windows -- leads to a hard crash (ordinarily
it would be called a segmentation fault, but in Windows speak it is an
access violation).
This problem was identified by our faithful tests when run in the msysGit
environment.
To avoid having to wrap the line due to the 80 column limit, we use
the name "WHEN_THREADED" instead of "IF_USE_THREADS" because it is one
character shorter. Which is all we need in this case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-pack-objects-compete-with-delete:
downgrade "packfile cannot be accessed" errors to warnings
pack-objects: protect against disappearing packs
* nd/maint-autofix-tag-in-head:
Accept tags in HEAD or MERGE_HEAD
merge: remove global variable head[]
merge: use return value of resolve_ref() to determine if HEAD is invalid
merge: keep stash[] a local variable
Conflicts:
builtin/merge.c
This brings back some of the performance lost in optimizing recency
order inside pack objects. We were doing extreme amounts of object
re-traversal: for the 2.14 million objects in the Linux kernel
repository, we were calling add_to_write_order() over 1.03 billion times
(a 0.2% hit rate, making 99.8% of of these calls extraneous).
Two optimizations take place here- we can start our objects array
iteration from a known point where we left off before we started trying
to find our tags, and we don't need to do the deep dives required by
add_family_to_write_order() if the object has already been marked as
filled.
These two optimizations bring some pretty spectacular results via `perf
stat`:
task-clock: 83373 ms --> 43800 ms (50% faster)
cycles: 221,633,461,676 --> 116,307,209,986 (47% fewer)
instructions: 149,299,179,939 --> 122,998,800,184 (18% fewer)
Helped-by: Ramsay Jones (format string fix in "die" message)
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/no-cherry-pick-head-after-punted:
cherry-pick: do not give irrelevant advice when cherry-pick punted
revert.c: defer writing CHERRY_PICK_HEAD till it is safe to do so
This removes the need to call this function recursively, shinking the
code size slightly and netting a small performance increase.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is done in some of the new pack layout code introduced in commit
1b4bb16b9e. This more closely matches the nr_objects global that is
unsigned that these variables are based off of and bounded by.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is a whole 26 bytes when compiled on x86_64, but is
currently invoked over 1.037 billion times when running pack-objects on
the Linux kernel git repository. This is hitting the point where
micro-optimizations do make a difference, and inlining it only increases
the object file size by 38 bytes.
As reported by perf, this dropped task-clock from 84183 to 83373 ms, and
total cycles from 223.5 billion to 221.6 billion. Not astronomical, but
worth getting for adding one word.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --tags is specified, add that refspec to the list given to
prune_refs so it knows to treat it as a filter on what refs to
should consider for prunning. This way
git fetch --prune --tags origin
only prunes tags and doesn't delete the branch refs.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gave us refspecs on the command line, we should use those
when deciding whether to prune a ref instead of relying on the
refspecs in the config.
Previously, running
git fetch --prune origin refs/heads/master:refs/remotes/origin/master
would delete every other ref under the origin namespace because we
were using the refspec to filter the available refs but using the
configured refspec to figure out if a ref had been deleted on the
remote. This is clearly the wrong thing to do.
Change prune_refs and get_stale_heads to simply accept a list of
references and a list of refspecs. The caller of either function needs
to decide what refspecs should be used to decide whether a ref is
stale.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These can happen if another process simultaneously prunes a
pack. But that is not usually an error condition, because a
properly-running prune should have repacked the object into
a new pack. So we will notice that the pack has disappeared
unexpectedly, print a message, try other packs (possibly
after re-scanning the list of packs), and find it in the new
pack.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that while pack-objects is running, a
simultaneously running prune process might delete a pack
that we are interested in. Because we load the pack indices
early on, we know that the pack contains our item, but by
the time we try to open and map it, it is gone.
Since c715f78, we already protect against this in the normal
object access code path, but pack-objects accesses the packs
at a lower level. In the normal access path, we call
find_pack_entry, which will call find_pack_entry_one on each
pack index, which does the actual lookup. If it gets a hit,
we will actually open and verify the validity of the
matching packfile (using c715f78's is_pack_valid). If we
can't open it, we'll issue a warning and pretend that we
didn't find it, causing us to go on to the next pack (or on
to loose objects).
Furthermore, we will cache the descriptor to the opened
packfile. Which means that later, when we actually try to
access the object, we are likely to still have that packfile
opened, and won't care if it has been unlinked from the
filesystem.
Notice the "likely" above. If there is another pack access
in the interim, and we run out of descriptors, we could
close the pack. And then a later attempt to access the
closed pack could fail (we'll try to re-open it, of course,
but it may have been deleted). In practice, this doesn't
happen because we tend to look up items and then access them
immediately.
Pack-objects does not follow this code path. Instead, it
accesses the packs at a much lower level, using
find_pack_entry_one directly. This means we skip the
is_pack_valid check, and may end up with the name of a
packfile, but no open descriptor.
We can add the same is_pack_valid check here. Unfortunately,
the access patterns of pack-objects are not quite as nice
for keeping lookup and object access together. We look up
each object as we find out about it, and the only later when
writing the packfile do we necessarily access it. Which
means that the opened packfile may be closed in the interim.
In practice, however, adding this check still has value, for
three reasons.
1. If you have a reasonable number of packs and/or a
reasonable file descriptor limit, you can keep all of
your packs open simultaneously. If this is the case,
then the race is impossible to trigger.
2. Even if you can't keep all packs open at once, you
may end up keeping the deleted one open (i.e., you may
get lucky).
3. The race window is shortened. You may notice early that
the pack is gone, and not try to access it. Triggering
the problem without this check means deleting the pack
any time after we read the list of index files, but
before we access the looked-up objects. Triggering it
with this check means deleting the pack means deleting
the pack after we do a lookup (and successfully access
the packfile), but before we access the object. Which
is a smaller window.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/pending:
commit: factor out clear_commit_marks_for_object_array
checkout: use leak_pending flag
bundle: use leak_pending flag
bisect: use leak_pending flag
revision: add leak_pending flag
checkout: use add_pending_{object,sha1} in orphan check
revision: factor out add_pending_sha1
checkout: check for "Previous HEAD" notice in t2020
Conflicts:
builtin/checkout.c
revision.c
* nd/maint-autofix-tag-in-head:
Accept tags in HEAD or MERGE_HEAD
merge: remove global variable head[]
merge: use return value of resolve_ref() to determine if HEAD is invalid
merge: keep stash[] a local variable
Conflicts:
builtin/merge.c
Implemented internally instead of as "git merge --no-commit && git commit"
so that "merge --edit" is otherwise consistent (hooks, etc) with "merge".
Note: the edit message does not include the status information that one
gets with "commit --status" and it is cleaned up after editing like one
gets with "commit --cleanup=default". A later patch could add the status
information if desired.
Note: previously we were not calling stripspace() after running the
prepare-commit-msg hook. Now we are, stripping comments and
leading/trailing whitespace lines if --edit is given, otherwise only
stripping leading/trailing whitespace lines if not given --edit.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I noticed this when "git am CORRUPTED" unexpectedly failed with an
odd diagnostic, and even removed one of the files it was supposed
to have patched.
Reproduce with any valid old/new patch from which you have removed
the "+++ b/FILE" line. You'll see a diagnostic like this
fatal: unable to write file '(null)' mode 100644: Bad address
and you'll find that FILE has been removed.
The above is on glibc-based systems. On other systems, rather than
getting "null", you may provoke a segfault as git tries to
dereference the NULL file name.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/check-ref-format-3: (23 commits)
add_ref(): verify that the refname is formatted correctly
resolve_ref(): expand documentation
resolve_ref(): also treat a too-long SHA1 as invalid
resolve_ref(): emit warnings for improperly-formatted references
resolve_ref(): verify that the input refname has the right format
remote: avoid passing NULL to read_ref()
remote: use xstrdup() instead of strdup()
resolve_ref(): do not follow incorrectly-formatted symbolic refs
resolve_ref(): extract a function get_packed_ref()
resolve_ref(): turn buffer into a proper string as soon as possible
resolve_ref(): only follow a symlink that contains a valid, normalized refname
resolve_ref(): use prefixcmp()
resolve_ref(): explicitly fail if a symlink is not readable
Change check_refname_format() to reject unnormalized refnames
Inline function refname_format_print()
Make collapse_slashes() allocate memory for its result
Do not allow ".lock" at the end of any refname component
Refactor check_refname_format()
Change check_ref_format() to take a flags argument
Change bad_ref_char() to return a boolean value
...
* mz/remote-rename:
remote: only update remote-tracking branch if updating refspec
remote rename: warn when refspec was not updated
remote: "rename o foo" should not rename ref "origin/bar"
remote: write correct fetch spec when renaming remote 'remote'
* cb/common-prefix-unification:
rename pathspec_prefix() to common_prefix() and move to dir.[ch]
consolidate pathspec_prefix and common_prefix
remove prefix argument from pathspec_prefix
The previous logic in show_config was to print the delimiter when the
value was set, but Boolean variables have an implicit value "true" when
they appear with no value in the config file. As a result, we got:
git_Config --get-regexp '.*\.Boolean' #1. Ok: example.boolean
git_Config --bool --get-regexp '.*\.Boolean' #2. NO: example.booleantrue
Fix this by defering the display of the separator until after the value
to display has been computed.
Reported-by: Brian Foster <brian.foster@maxim-ic.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, gcc complains as follows:
CC tree-walk.o
tree-walk.c: In function `traverse_trees':
tree-walk.c:347: warning: 'e' might be used uninitialized in this \
function
CC builtin/revert.o
builtin/revert.c: In function `verify_opt_mutually_compatible':
builtin/revert.c:113: warning: 'opt2' might be used uninitialized in \
this function
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Close FETCH_HEAD and release the string url even if we have to leave the
function store_updated_refs() early.
Reported-by: Chris Wilson <cwilson@vigilantsw.com>
Helped-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "merge --log" and fmt-merge-msg to use branch description
information when merging a local topic branch into the mainline. The
description goes between the branch name label and the list of commit
titles.
The refactoring to share the common configuration parsing between
merge and fmt-merge-msg needs to be made into a separate patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-no-cherry-pick-head-after-punted:
cherry-pick: do not give irrelevant advice when cherry-pick punted
revert.c: defer writing CHERRY_PICK_HEAD till it is safe to do so
Conflicts:
builtin/revert.c
If a cherry-pick did not even start because the working tree had local
changes that would overlap with the operation, we shouldn't be advising
the users to resolve conflicts nor to conclude it with "git commit".
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
do_pick_commit() writes out CHERRY_PICK_HEAD before invoking merge (either
via do_recursive_merge() or try_merge_command()) on the assumption that if
the merge fails it is due to conflict. However, if the tree is dirty, the
merge may not even start, aborting before do_pick_commit() can remove
CHERRY_PICK_HEAD.
Instead, defer writing CHERRY_PICK_HEAD till after merge has returned.
At this point we know the merge has either succeeded or failed due
to conflict. In either case, we want CHERRY_PICK_HEAD to be written
so that it may be picked up by the subsequent invocation of commit.
Note that do_recursive_merge() aborts if the merge cannot start, while
try_merge_command() returns a non-zero value other than 1.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code calls git_config from a helper function to parse the config entry
it is interested in. Calling git_config in this way may cause a problem if
the helper function can be called after a previous call to git_config by
another function since the second call to git_config may reset some
variable to the value in the config file which was previously overridden.
The above is not a problem in this case since the function passed to
git_config only parses one config entry and the variable it sets is not
assigned outside of the parsing function. But a programmer who desires
all of the standard config options to be parsed may be tempted to modify
git_attr_config() so that it falls back to git_default_config() and then it
_would_ be vulnerable to the above described behavior.
So, move the call to git_config up into the top-level cmd_* function and
move the responsibility for parsing core.attributesfile into the main
config file parser.
Which is only the logical thing to do ;-)
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "it" string would not be free'ed if base_name was non-NULL.
Let's free it.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "x"-prefixed versions of strdup, malloc, etc. will check whether the
allocation was successful and terminate the process otherwise.
A few uses of malloc were left alone since they already implemented a
graceful path of failure or were in a quasi external library like xdiff.
Additionally, the call to malloc in compat/win32/syslog.c was not modified
since the syslog() implemented there is a die handler and a call to the
x-wrappers within a die handler could result in recursion should memory
allocation fail. This will have to be addressed separately.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using branch.$name.description as the configuration key, give users a
place to write about what the purpose of the branch is and things like
that, so that various subsystems, e.g. "push -s", "request-pull", and
"format-patch --cover-letter", can later be taught to use this
information.
The "-m" option similar to "commit/tag" is deliberately omitted, as the
whole point of branch description is about giving descriptive information
(the name of the branch itself is a better place for information that fits
on a single-line).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the description for the branch when preparing the cover letter
when available.
While at it, mark a loosely written codepath that would do a random and
useless thing given an unusual input (e.g. "^master HEAD HEAD^"), which
we may want to fix someday.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since much of the infrastructure does not work correctly with
unnormalized refnames, change check_refname_format() to reject them.
Similarly, change "git check-ref-format" to reject unnormalized
refnames by default. But add an option --normalize, which causes "git
check-ref-format" to normalize the refname before checking its format,
and print the normalized refname. This is exactly the behavior of the
old --print option, which is retained but deprecated.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Soon we will make printing independent of collapsing.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make upcoming changes a tiny bit easier.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change check_ref_format() to take a flags argument that indicates what
is acceptable in the reference name (analogous to "git
check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This
is more convenient for callers and also fixes a failure in the test
suite (and likely elsewhere in the code) by enabling "onelevel" and
"refspec-pattern" to be allowed independently of each other.
Also rename check_ref_format() to check_refname_format() to make it
obvious that it deals with refnames rather than references themselves.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add tests of the new options. (Actually, one big reason to add
the new options is to make it easy to test check_ref_format(), though
the options should also be useful to other scripts.)
Interpret the result of check_ref_format() based on which types of
refnames are allowed. However, because check_ref_format() can only
return a single value, one test case is still broken. Specifically,
the case "git check-ref-format --onelevel '*'" incorrectly succeeds
because check_ref_format() returns CHECK_REF_FORMAT_ONELEVEL for this
refname even though the refname is also CHECK_REF_FORMAT_WILDCARD.
The type of check that leads to this failure is used elsewhere in
"real" code and could lead to bugs; it will be fixed over the next few
commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/argv-array:
run_hook: use argv_array API
checkout: use argv_array API
bisect: use argv_array API
quote: provide sq_dequote_to_argv_array
refactor argv_array into generic code
quote.h: fix bogus comment
add sha1_array API docs
* mg/branch-list:
t3200: clean up checks for file existence
branch: -v does not automatically imply --list
branch: allow pattern arguments
branch: introduce --list option
git-branch: introduce missing long forms for the options
git-tag: introduce long forms for the options
t6040: test branch -vv
Conflicts:
Documentation/git-tag.txt
t/t3200-branch.sh
* jk/for-each-ref:
for-each-ref: add split message parts to %(contents:*).
for-each-ref: handle multiline subjects like --pretty
for-each-ref: refactor subject and body placeholder parsing
t6300: add more body-parsing tests
t7004: factor out gpg setup
* jc/receive-verify:
receive-pack: check connectivity before concluding "git push"
check_everything_connected(): libify
check_everything_connected(): refactor to use an iterator
fetch: verify we have everything we need before updating our ref
Conflicts:
builtin/fetch.c
* jc/fetch-verify:
fetch: verify we have everything we need before updating our ref
rev-list --verify-object
list-objects: pass callback data to show_objects()
* rr/revert-cherry-pick-continue:
builtin/revert.c: make commit_list_append() static
revert: Propagate errors upwards from do_pick_commit
revert: Introduce --continue to continue the operation
revert: Don't implicitly stomp pending sequencer operation
revert: Remove sequencer state when no commits are pending
reset: Make reset remove the sequencer state
revert: Introduce --reset to remove sequencer state
revert: Make pick_commits functionally act on a commit list
revert: Save command-line options for continuing operation
revert: Save data for continuing after conflict resolution
revert: Don't create invalid replay_opts in parse_args
revert: Separate cmdline parsing from functional code
revert: Introduce struct to keep command-line options
revert: Eliminate global "commit" variable
revert: Rename no_replay to record_origin
revert: Don't check lone argument in get_encoding
revert: Simplify and inline add_message_to_msg
config: Introduce functions to write non-standard file
advice: Introduce error_resolve_conflict
Make ERR as first packet of remote snapshot reply work like it does in
fetch/push. Lets servers decline remote snapshot with message the same
way as declining fetch/push with a message.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-grep-untracked-exclude:
grep: teach --untracked and --exclude-standard options
grep --no-index: don't use git standard exclusions
grep: do not use --index in the short usage output
Conflicts:
Documentation/git-grep.txt
builtin/grep.c
Give each mode of operation (all, from stdin, given commits) its own usage
line to make it easier to see that they are mutually exclusive.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the code to clear the commit marks for a whole struct
object_array from builtin/checkout.c into its own exported function
clear_commit_marks_for_object_array and use it in bisect and bundle
as well. It handles tags and commits and ignores objects of any
other type.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of going through all the references again when we clear the
commit marks, do it like bisect and bundle and gain ownership of the
list of pending objects which we constructed from those references.
We simply copy the struct object_array that points to the list, set
the flag leak_pending and then prepare_revision_walk won't destroy
it and it's ours. We use it to clear the marks and free it at the
end.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of building a list of textual arguments for setup_revisions, use
add_pending_object and add_pending_sha1 to queue the objects directly.
This is both faster and simpler.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a push specifies deletion of non-existent refs, the post post-receive and
post-update hooks receive them as input/arguments.
For instance, for the following push, where refs/heads/nonexistent is a ref
which does not exist on the remote side:
git push origin :refs/heads/nonexistent
the post-receive hook receives from standard input:
<null-sha1> SP <null-sha1> SP refs/heads/nonexistent
and the post-update hook receives as arguments:
refs/heads/nonexistent
which does not make sense since it is a no-op.
Teach receive-pack not to pass non-existent refs to the post-receive and
post-update hooks. If the push only attempts to delete non-existent refs,
these hooks are not even called.
The update and pre-receive hooks are still notified about attempted
deletion of non-existent refs to give them a chance to inspect the
situation and act on it.
[jc: mild fix-ups to avoid introducing an extra list; also added fixes to
some tests]
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking paths out of a tree is (currently) defined to do:
- Grab the paths from the named tree that match the given pathspec,
and add them to the index;
- Check out the contents from the index for paths that match the
pathspec to the working tree; and while at it
- If the given pathspec did not match anything, suspect a typo from the
command line and error out without updating the index nor the working
tree.
Suppose that the branch you are working on has dir/myfile, and the "other"
branch has dir/other but not dir/myfile. Further imagine that you have
either modified or removed dir/myfile in your working tree, but you have
not run "git add dir/myfile" or "git rm dir/myfile" to tell Git about your
local change. Running
$ git checkout other dir
would add dir/other to the index with the contents taken out of the
"other" branch, and check out the paths from the index that match the
pathspec "dir", namely, "dir/other" and "dir/myfile", overwriting your
local changes to "dir/myfile", even though "other" branch does not even
know about that file.
Fix it by updating the working tree only with the index entries that
was read from the "other" tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running git describe --dirty the index should be refreshed. Previously
the cached index would cause describe to think that the index was dirty when,
in reality, it was just stale.
The issue was exposed by python setuptools which hardlinks files into another
directory when building a distribution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option causes check-attr to consider .gitattributes only from
the index, ignoring .gitattributes from the working tree. This allows
the command to be used in situations where a working tree does not exist.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_one_patchid() uses a rather dumb heuristic to determine if the
passed buffer is part of the next commit. Whenever the first 40 bytes
are a valid hexadecimal sha1 representation, get_one_patchid() returns
next_sha1.
Once the current line is longer than the fixed buffer, this will break
(provided the additional bytes make a valid hexadecimal sha1). As a result
patch-id returns incorrect results. Instead, use strbuf and read one line
at a time.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the usual "git" transport, a large-ish transfer with "git fetch" and
"git pull" give progress eye-candy to avoid boring users. However, not
when they are reading from a bundle. I.e.
$ git pull ../git-bundle.bndl master
This teaches bundle.c:unbundle() to give "-v" option to index-pack and
tell it to give progress bar when transport decides it is necessary.
The operation in the other direction, "git bundle create", could also
learn to honor --quiet but that is a separate issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HEAD and MERGE_HEAD (among other branch tips) should never hold a
tag. That can only be caused by broken tools and is cumbersome to fix
by an end user with:
$ git update-ref HEAD $(git rev-parse HEAD^{commit})
which may look like a magic to a new person.
Be easy, warn users (so broken tools can be fixed if they bother to
report) and move on.
Be robust, if the given SHA-1 cannot be resolved to a commit object,
die (therefore return value is always valid).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also kill head_invalid in favor of "head_commit == NULL".
Local variable "head" in cmd_merge() is renamed to "head_sha1" to make
sure I don't miss any access because this variable should not be used
after head_commit is set (use head_commit->object.sha1 instead).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() only updates "head" when it returns non NULL value (it
may update "head" even when returning NULL, but not in all cases).
Because "head" is not initialized before the call, is_null_sha1() is
not enough. Check also resolve_ref() return value.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git branch" command, while not in listing mode, calls create_branch()
even when the target branch already exists, and it does so even when it is
not interested in updating the value of the branch (i.e. the name of the
commit object that sits at the tip of the existing branch). This happens
when the command is run with "--set-upstream" option.
The earlier safety-measure to prevent "git branch -f $branch $commit" from
updating the currently checked out branch did not take it into account,
and we no longer can update the tracking information of the current branch.
Minimally fix this regression by telling the validation code if it is
called to really update the value of a potentially existing branch, or if
the caller merely is interested in updating auxiliary aspects of a branch.
Reported-and-Tested-by: Jay Soffian
Signed-off-by: Junio C Hamano <gitster@pobox.com>
What should happen if you run this command?
$ git ls-remote -h
It does not give a short-help for the command. Instead because "-h" is a
synonym for "--heads", it runs "git ls-remote --heads", and because there
is no remote specified on the command line, we run it against the default
"origin" remote, hence end up doing the same as
$ git ls-remote --heads origin
Fix this counter-intuitive behaviour by special casing a lone "-h" that
does not have anything else on the command line and calling usage().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It probably is not such a good idea to use ":/<pattern>" to specify which
commit to merge, as ":/<pattern>" can often hit unexpected commits, but
somebody tried it and got a nonsense error message:
fatal: ':/Foo bar' does not point to a commit
So here is a for-the-sake-of-consistency update that is fairly useless
that allows users to carefully try not shooting in the foot.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were using a similar ad-hoc rev_list_args structure, but
this saves some code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Yes, there is a warning that says the function is only used by push in big
red letters in front of this function, but it didn't say a more important
thing it should have said: what the function is for and what it does.
Rename it and document it to avoid future confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running a hook has to make complex set-up to establish web of
communication between child process and multiplexer, which is common
regardless of what kind of data is fed to the hook. Refactor the parts
that is specific to the data fed to the particular set of hooks from the
part that runs the hook, so that the code can be reused to drive hooks
that take different kind of data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message identifies the process as receive-pack when it cannot fork the
sideband demultiplexer. We are actually a send-pack.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also make common_prefix_len() static as this refactoring makes dir.c
itself the only caller of this helper function.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit c9bfb953 (want_color: automatically fallback to color.ui,
2011-08-17) introduced a regression where format-patch produces colorized
patches when color.ui is set to "always".
In f3aafa4 (Disable color detection during format-patch, 2006-07-09),
git_format_config was taught to intercept diff.color to avoid passing it
down to git_log_config and later, git_diff_ui_config.
Teach git_format_config to intercept color.ui in the same way.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git remote rename' will only update the remote's fetch refspec if it
looks like a default one. If the remote has no default fetch refspec,
as in
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/remotes/upstream/*
we would not update the fetch refspec and even if there is a ref
called "refs/remotes/origin/master", we should not rename it, since it
was not created by fetching from the remote.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote, we also try to update the fetch refspec
accordingly, but only if it has the default format. For others, such
as refs/heads/master:refs/heads/origin, we are conservative and leave
it untouched. Let's give the user a warning about refspecs that are
not updated, so he can manually update the config if necessary.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote called 'o' using 'git remote rename o foo', git
should also rename any remote-tracking branches for the remote. This
does happen, but any remote-tracking branches starting with
'refs/remotes/o', such as 'refs/remotes/origin/bar', will also be
renamed (to 'refs/remotes/foorigin/bar' in this case).
Fix it by simply matching one more character, up to the slash
following the remote name.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote whose name is contained in a configured fetch
refspec for that remote, we currently replace the first occurrence of
the remote name in the refspec. This is correct in most cases, but
breaks if the remote name occurs in the fetch refspec before the
expected place. For example, we currently change
[remote "remote"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/remotes/remote/*
into
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/origins/remote/*
Reduce the risk of changing incorrect sections of the refspec by
matching the entire ":refs/remotes/<name>/" instead of just "<name>".
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asking fwrite() to write one item of size bytes results in fwrite()
reporting "I wrote zero item", when size is zero. Instead, we could
ask it to write "size" items of 1 byte and expect it to report that
"I wrote size items" when it succeeds, with any value of size,
including zero.
Noticed and reported by BJ Hargrave.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the helper function and the type definition of the iterator
function it uses out of builtin/fetch.c into a separate source and a
header file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will be using the same "rev-list --verify-objects" logic to add a
sanity check to the receiving end of "git push" in the same way, but the
list of commits that are checked come from a structure with a different
shape over there.
Update the function to take an iterator to make it easier to reuse it in
different contexts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git fetch" command works in two phases. The remote side tells us what
objects are at the tip of the refs we are fetching from, and transfers the
objects missing from our side. After storing the objects in our repository,
we update our remote tracking branches to point at the updated tips of the
refs.
A broken or malicious remote side could send a perfectly well-formed pack
data during the object transfer phase, but there is no guarantee that the
given data actually fill the gap between the objects we originally had and
the refs we are updating to.
Although this kind of breakage can be caught by running fsck after a
fetch, it is much cheaper to verify that everything that is reachable from
the tips of the refs we fetched are indeed fully connected to the tips of
our current set of refs before we update them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes no sense to do the - possibly very expensive - call to "rev-list
<new-ref-sha1> --not --all" in check_for_new_submodule_commits() when
there aren't any submodules configured.
Leave check_for_new_submodule_commits() early when no name <-> path
mappings for submodules are found in the configuration. To make that work
reading the configuration had to be moved further up in cmd_fetch(), as
doing that after the actual fetch of the superproject was too late.
Reported-by: Martin Fick <mfick@codeaurora.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"branch -v" without other options or parameters still works in the list
mode, but that is not because there is "-v" but because there is no
parameter nor option.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The %(body) placeholder returns the whole body of a tag or
commit, including the signature. However, callers may want
to get just the body without signature, or just the
signature.
Rather than change the meaning of %(body), which might break
some scripts, this patch introduces a new set of
placeholders which break down the %(contents) placeholder
into its constituent parts.
[jk: initial patch by mg, rebased on top of my refactoring
and with tests by me]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generally the format of a git tag or commit message is:
subject
body body body
body body body
However, we occasionally see multiline subjects like:
subject
with multiple
lines
body body body
body body body
The rest of git treats these multiline subjects as something
to be concatenated and shown as a single line (e.g., "git
log --pretty=format:%s" will do so since f53bd74). For
consistency, for-each-ref should do the same with its
"%(subject)".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The find_subpos function was a little hard to use, as well
as to read. It would sometimes write into the subject and
body pointers, and sometimes not. The body pointer sometimes
could be compared to subject, and sometimes not. When
actually duplicating the subject, the caller was forced to
figure out again how long the subject is (which is not too
big a deal when the subject is a single line, but hard to
extend).
The refactoring makes the function more straightforward, both
to read and to use. We will always put something into the
subject and body pointers, and we return explicit lengths
for them, too.
This lays the groundwork both for more complex subject
parsing (e.g., multiline), as well as splitting the body
into subparts (like the text versus the signature).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Passing a prefix to a function that is supposed to find the prefix is
strange. And it's really only used if the pathspec is NULL. Make the
callers handle this case instead.
As we are always returning a fresh copy of a string (or NULL), change the
type of the returned value to non-const "char *".
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ffa69e61d3, reversing
changes made to 4a13c4d148.
Adding a new command line option to receive-pack and feed it from
send-pack is not an acceptable way to add features, as there is no
guarantee that your updated send-pack will be talking to updated
receive-pack. New features need to be added via the capability mechanism
negotiated over the protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This single variable can be used to set instead of setting fsckobjects
variable for fetch & receive independently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This corresponds to receive.fsckobjects configuration variable added (a
lot) earlier in 20dc001 (receive-pack: allow using --strict mode for
unpacking objects, 2008-02-25).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git fetch" command works in two phases. The remote side tells us what
objects are at the tip of the refs we are fetching from, and transfers the
objects missing from our side. After storing the objects in our repository,
we update our remote tracking branches to point at the updated tips of the
refs.
A broken or malicious remote side could send a perfectly well-formed pack
data during the object transfer phase, but there is no guarantee that the
given data actually fill the gap between the objects we originally had and
the refs we are updating to.
Although this kind of breakage can be caught by running fsck after a
fetch, it is much cheaper to verify that everything that is reachable from
the tips of the refs we fetched are indeed fully connected to the tips of
our current set of refs before we update them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Often we want to verify everything reachable from a given set of commits
are present in our repository and connected without a gap to the tips of
our refs. We used to do this for this purpose:
$ rev-list --objects $commits_to_be_tested --not --all
Even though this is good enough for catching missing commits and trees,
we show the object name but do not verify their existence, let alone their
well-formedness, for the blob objects at the leaf level.
Add a new "--verify-object" option so that we can catch missing and broken
blobs as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The traverse_commit_list() API takes two callback functions, one to show
commit objects, and the other to show other kinds of objects. Even though
the former has a callback data parameter, so that the callback does not
have to rely on global state, the latter does not.
Give the show_objects() callback the same callback data parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current explanation of -e can be misread as allowing the user to say
I know 'git clean -XYZ' (substitute -XYZ with any option and/or
parameter) will remove paths A, B, and C, and I want them all removed
except for paths matching this pattern by adding '-e C' to the same
command line, i.e. 'git clean -e C -XYZ'.
But that is not what this option does. It augments the set of ignore rules
from the command line, just like the same "-e <pattern>" argument does
with the "ls-files" command (the user could probably pass "-e \!C" to tell
the command to clean everything the command would normally remove, except
for C). Also error out when both -x and -e are given with an explanation of
what -e means---it is a symptom of misunderstanding what -e does.
It also fixes small style nit in the parameter to add_exclude() call. The
current code only works because EXC_CMDL happens to be defined as 0.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow pattern arguments for the list mode just like for git tag -l.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, there is no way to invoke the list mode explicitly, without
giving -v to force verbose output.
Introduce a --list option which invokes the list mode. This will be
beneficial for invoking list mode with pattern matching, which otherwise
would be interpreted as branch creation.
Along with --list, test also combinations of existing options.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long forms are better to memorize and more reliably uniform across
commands.
Names follow precedents, e.g. "git log --remotes".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long forms are better to memorize and more reliably uniform across
commands.
Design notes:
-u,--local-user is named following the analogous gnupg option.
-l,--list is not an argument taking option but a mode switch.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/decorate-grafts:
log: Do not decorate replacements with --no-replace-objects
log: decorate "replaced" on to replaced commits
log: decorate grafted commits with "grafted"
Move write_shallow_commits to fetch-pack.c
Add for_each_commit_graft() to iterate all grafts
decoration: do not mis-decorate refs with same prefix
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
A stash is created by save_state() and used by restore_state(). Pass
SHA-1 explicitly for clarity and keep stash[] to cmd_merge().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When asked if "refs///heads/master" is valid, check-ref-format says "Yes,
it is well formed", and when asked to print canonical form, it shows
"refs/heads/master". This is so that it can be tucked after "$GIT_DIR/"
to form a valid pathname for a loose ref, and we normalize a pathname like
"$GIT_DIR/refs///heads/master" to de-dup the slashes in it.
Similarly, when asked if "/refs/heads/master" is valid, check-ref-format
says "Yes, it is Ok", but the leading slash is not removed when printing,
leading to "$GIT_DIR//refs/heads/master".
Fix it to make sure such leading slashes are removed. Add tests that such
refnames are accepted and normalized correctly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-quiet-push:
receive-pack: do not overstep command line argument array
propagate --quiet to send-pack/receive-pack
Conflicts:
Documentation/git-receive-pack.txt
Documentation/git-send-pack.txt
Cloning from a local repository blindly copies or hardlinks all the files
under objects/ hierarchy. This results in two issues:
- If the repository cloned has an "objects/info/alternates" file, and the
command line of clone specifies --reference, the ones specified on the
command line get overwritten by the copy from the original repository.
- An entry in a "objects/info/alternates" file can specify the object
stores it borrows objects from as a path relative to the "objects/"
directory. When cloning a repository with such an alternates file, if
the new repository is not sitting next to the original repository, such
relative paths needs to be adjusted so that they can be used in the new
repository.
This updates add_to_alternates_file() to take the path to the alternate
object store, including the "/objects" part at the end (earlier, it was
taking the path to $GIT_DIR and was adding "/objects" itself), as it is
technically possible to specify in objects/info/alternates file the path
of a directory whose name does not end with "/objects".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a test to expose a long-standing bug that is triggered when
cloning with --reference option from a local repository that has its own
alternates. The alternate object stores specified on the command line
are lost, and only alternates copied from the source repository remain.
The bug will be fixed in the next patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -M <foo> <current-branch>" allows updating the current branch
which HEAD points, without the necessary house-keeping that git reset
normally does to make this operation sensible. It also leaves the reflog
in a confusing state (you would be warned when trying to read it).
"git checkout -B <current branch> <foo>" is also partly vulnerable to this
bug; due to inconsistent pre-flight checks it would perform half of its
task and then abort just before rewriting the branch. Again this
manifested itself as the index file getting out-of-sync with HEAD.
"git branch -f" already guarded against this problem, and aborts with
a fatal error.
Update "git branch -M", "git checkout -B" and "git branch -f" to share the
same check before allowing a branch to be created. These prevent you from
updating the current branch.
We considered suggesting the use of "git reset" in the failure message
but concluded that it was not possible to discern what the user was
actually trying to do.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function was not gentle at all to the callers and died without giving
them a chance to deal with possible errors. Rename it to read_gitfile(),
and update all the callers.
As no existing caller needs a true "gently" variant, we do not bother
adding one at this point.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two copies of traverse_commit_list callback that show the object
name followed by pathname the object was found, to produce output similar
to "rev-list --objects".
Unify them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The callback to traverse_commit_list() are to take linked name_path and
a string for the last path component.
If the callee used its parameters, it would have seen duplicated leading
paths. In this particular case, the callee does not use this argument but
that is not a reason to leave the call broken.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with submodules it is easy to forget to push a
submodule to the server but pushing a super-project that
contains a commit for that submodule. The result is that the
superproject points at a submodule commit that is not available
on the server.
This adds the option --recurse-submodules=check to push. When
using this option git will check that all submodule commits that
are about to be pushed are present on a remote of the submodule.
To be able to use a combined diff, disabling a diff callback has
been removed from combined-diff.c.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the "do we want color" flags default to -1 to
indicate that we don't have any color configured. This value
is handled in one of two ways:
1. In porcelain, we check early on whether the value is
still -1 after reading the config, and set it to the
value of color.ui (which defaults to 0).
2. In plumbing, it stays untouched as -1, and want_color
defaults it to off.
This works fine, but means that every porcelain has to check
and reassign its color flag. Now that want_color gives us a
place to put this check in a single spot, we can do that,
simplifying the calling code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "git config --get-colorbool color.foo", we use a custom
callback that looks not only for the key that the user gave
us, but also for "diff.color" (for backwards compatibility)
and "color.ui" (as a fallback).
For the former, we use a custom variable to store the
diff.color value. For the latter, though, we store it in the
main "git_use_color_default" variable, turning on color.ui
for any other parts of git that respect this value.
In practice, this doesn't cause any bugs, because git-config
runs without caring about git_use_color_default, and then
exits. But it crosses module boundaries in an unusual and
confusing way, and it makes refactoring color handling
harder than it needs to be.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file-scope global variable head_sha1[] was used to hold the object
name of the current HEAD commit (unless we are about to make an initial
commit). Also there is an independent "static int initial_commit".
Fix all the functions on the call-chain that use these two variables to
take a new "(const) struct commit *current_head" argument instead, and
replace their uses, e.g. "if (initial_commit)" becomes "if (!current_head)"
and a reference to "head_sha1" becomes "current_head->object.sha1".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually this function figures out for itself whether stdout
is a tty. However, it has an extra parameter just to allow
git-config to override the auto-detection for its
--get-colorbool option.
Instead of an extra parameter, let's just use a global
variable. This makes calling easier in the common case, and
will make refactoring the colorbool code much simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.
This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A malicious server can return ACK with non-existent SHA-1 or not a
commit. lookup_commit() in this case may return NULL. Do not let
fetch-pack crash by accessing NULL address in this case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function produces network traffic and should be in fetch-pack. It
has been in commit.c because it needs to iterate (private) graft
list. It can now do so using for_each_commit_graft().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/check-attr-relative: (29 commits)
test-path-utils: Add subcommand "prefix_path"
test-path-utils: Add subcommand "absolute_path"
git-check-attr: Normalize paths
git-check-attr: Demonstrate problems with relative paths
git-check-attr: Demonstrate problems with unnormalized paths
git-check-attr: test that no output is written to stderr
Rename git_checkattr() to git_check_attr()
git-check-attr: Fix command-line handling to match docs
git-check-attr: Drive two tests using the same raw data
git-check-attr: Add an --all option to show all attributes
git-check-attr: Error out if no pathnames are specified
git-check-attr: Process command-line args more systematically
git-check-attr: Handle each error separately
git-check-attr: Extract a function error_with_usage()
git-check-attr: Introduce a new variable
git-check-attr: Extract a function output_attr()
Allow querying all attributes on a file
Remove redundant check
Remove redundant call to bootstrap_attr_stack()
Extract a function collect_all_attrs()
...
* js/bisect-no-checkout:
bisect: add support for bisecting bare repositories
bisect: further style nitpicks
bisect: replace "; then" with "\n<tab>*then"
bisect: cleanup whitespace errors in git-bisect.sh.
bisect: add documentation for --no-checkout option.
bisect: add tests for the --no-checkout option.
bisect: introduce --no-checkout support into porcelain.
bisect: introduce support for --no-checkout option.
bisect: add tests to document expected behaviour in presence of broken trees.
bisect: use && to connect statements that are deferred with eval.
bisect: move argument parsing before state modification.
* cb/maint-quiet-push:
receive-pack: do not overstep command line argument array
propagate --quiet to send-pack/receive-pack
Conflicts:
Documentation/git-receive-pack.txt
Documentation/git-send-pack.txt
The first paragraph about flag order is no longer true and is
mentioned in git-checkout-index.txt. The rest is also mentioned in
git-checkout-index.txt.
Remove it and keep uptodate document in one place.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/ls-tree-error:
Ensure git ls-tree exits with a non-zero exit code if read_tree_recursive fails.
Add a test to check that git ls-tree sets non-zero exit code on error.
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Check if <path> is a valid git-dir or a valid git-file that points
to a valid git-dir.
We want tests to be independent from the fact that a git-dir may
be a git-file. Thus we changed tests to use this feature.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The empty tree passed as common ancestor to merge_trees() when
cherry-picking a parentless commit is allocated on the heap and never
freed. Leaking such a small one-time allocation is not a very big
problem, but now that "git cherry-pick" can cherry-pick multiple
commits it can start to add up.
Avoid the leak by storing the fake tree exactly once in the BSS
section (i.e., use a static). While at it, let's add a test to make
sure cherry-picking multiple parentless commits continues to work.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following sequence of commands reveals an issue with error
reporting of relative paths:
$ mkdir sub
$ cd sub
$ git ls-files --error-unmatch ../bbbbb
error: pathspec 'b' did not match any file(s) known to git.
$ git commit --error-unmatch ../bbbbb
error: pathspec 'b' did not match any file(s) known to git.
This bug is visible only if the normalized path (i.e., the relative
path from the repository root) is longer than the prefix.
Otherwise, the code skips over the normalized path and reads from
an unused memory location which still contains a leftover of the
original command line argument.
So instead, use the existing facilities to deal with relative paths
correctly.
Also fix inconsistency between "checkout" and "commit", e.g.
$ cd Documentation
$ git checkout nosuch.txt
error: pathspec 'Documentation/nosuch.txt' did not match...
$ git commit nosuch.txt
error: pathspec 'nosuch.txt' did not match...
by propagating the prefix down the codepath that reports the error.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running git describe --dirty the index should be refreshed. Previously
the cached index would cause describe to think that the index was dirty when,
in reality, it was just stale.
The issue was exposed by python setuptools which hardlinks files into another
directory when building a distribution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/ls-tree-error:
Ensure git ls-tree exits with a non-zero exit code if read_tree_recursive fails.
Add a test to check that git ls-tree sets non-zero exit code on error.
Currently, revert_or_cherry_pick can fail in two ways. If it
encounters a conflict, it returns a positive number indicating the
intended exit status for the git wrapper to pass on; for all other
errors, it calls die(). The latter behavior is inconsiderate towards
callers, as it denies them the opportunity to recover from errors and
do other things.
After this patch, revert_or_cherry_pick will still return a positive
return value to indicate an exit status for conflicts as before, while
for some other errors, it will print an error message and return -1
instead of die()-ing. The cmd_revert and cmd_cherry_pick are adjusted
to handle the fatal errors by die()-ing themselves.
While the full benefits of this patch will only be seen once all the
"die" calls are replaced with calls to "error", its immediate impact
is to change some "fatal:" messages to say "error:" and to add a new
"fatal: cherry-pick failed" message at the end when the operation
fails.
Inspired-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new "git cherry-pick --continue" command which uses the
information in ".git/sequencer" to continue a cherry-pick that stopped
because of a conflict or other error. It works by dropping the first
instruction from .git/sequencer/todo and performing the remaining
cherry-picks listed there, with options (think "-s" and "-X") from the
initial command listed in ".git/sequencer/opts".
So now you can do:
$ git cherry-pick -Xpatience foo..bar
... description conflict in commit moo ...
$ git cherry-pick --continue
error: 'cherry-pick' is not possible because you have unmerged files.
fatal: failed to resume cherry-pick
$ echo resolved >conflictingfile
$ git add conflictingfile && git commit
$ git cherry-pick --continue; # resumes with the commit after "moo"
During the "git commit" stage, CHERRY_PICK_HEAD will aid by providing
the commit message from the conflicting "moo" commit. Note that the
cherry-pick mechanism has no control at this stage, so the user is
free to violate anything that was specified during the first
cherry-pick invocation. For example, if "-x" was specified during the
first cherry-pick invocation, the user is free to edit out the message
during commit time. Note that the "--signoff" option specified at
cherry-pick invocation time is not reflected in the commit message
provided by CHERRY_PICK_HEAD; the user must take care to add
"--signoff" during the "git commit" invocation.
Helped-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Protect the user from forgetting about a pending sequencer operation
by immediately erroring out when an existing cherry-pick or revert
operation is in progress like:
$ git cherry-pick foo
... conflict ...
$ git cherry-pick moo
error: .git/sequencer already exists
hint: A cherry-pick or revert is in progress
hint: Use --reset to forget about it
fatal: cherry-pick failed
A naive version of this would break the following established ways of
working:
$ git cherry-pick foo
... conflict ...
$ git reset --hard # I actually meant "moo" when I said "foo"
$ git cherry-pick moo
$ git cherry-pick foo
... conflict ...
$ git commit # commit the resolution
$ git cherry-pick moo # New operation
However, the previous patches "reset: Make reset remove the sequencer
state" and "revert: Remove sequencer state when no commits are
pending" make sure that this does not happen.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick or revert is called on a list of commits, and a
conflict encountered somewhere in the middle, the data in
".git/sequencer" is required to continue the operation. However, when
a conflict is encountered in the very last commit, the user will have
to "continue" after resolving the conflict and committing just so that
the sequencer state is removed. This is how the current "rebase -i"
script works as well.
$ git cherry-pick foo..bar
... conflict encountered while picking "bar" ...
$ echo "resolved" >problematicfile
$ git add problematicfile
$ git commit
$ git cherry-pick --continue # This would be a no-op
Change this so that the sequencer state is cleared when a conflict is
encountered in the last commit. Incidentally, this patch makes sure
that some existing tests don't break when features like "--reset" and
"--continue" are implemented later in the series.
A better way to implement this feature is to get the last "git commit"
to remove the sequencer state. However, that requires tighter
coupling between "git commit" and the sequencer, a goal that can be
pursued once the sequencer is made more general.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many pathnames in a fast-import stream need to be quoted. In
particular:
1. Pathnames at the end of an "M" or "D" line need quoting
if they contain a LF or start with double-quote.
2. Pathnames on a "C" or "R" line need quoting as above,
but also if they contain spaces.
For (1), we weren't quoting at all. For (2), we put
double-quotes around the paths to handle spaces, but ignored
the possibility that they would need further quoting.
This patch checks whether each pathname needs c-style
quoting, and uses it. This is slightly overkill for (1),
which doesn't actually need to quote many characters that
vanilla c-style quoting does. However, it shouldn't hurt, as
any implementation needs to be ready to handle quoted
strings anyway.
In addition to adding a test, we have to tweak a test which
blindly assumed that case (2) would always use
double-quotes, whether it needed to or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Normalize the path arguments (relative to the working tree root, if
applicable) before looking up their attributes. This requires passing
the prefix down the call chain.
This fixes two test cases for different reasons:
* "unnormalized paths" is fixed because the .gitattribute-file-seeking
code is not confused into reading the top-level file twice.
* "relative paths" is fixed because the canonical pathnames are passed
to get_check_attr() or get_all_attrs(), allowing them to match the
pathname patterns as expected.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggested by: Junio Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the git-check-attr synopsis, if the '--stdin' option is
used then no pathnames are expected on the command line. Change the
behavior to match this description; namely, if '--stdin' is used but
not '--', then treat all command-line arguments as attribute names.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new usage patterns
git check-attr [-a | --all] [--] pathname...
git check-attr --stdin [-a | --all] < <list-of-paths>
which display all attributes associated with the specified file(s).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no pathnames are passed as command-line arguments and the --stdin
option is not specified, fail with the error message "No file
specified". Add tests of this behavior.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid reusing variable "doubledash" to mean something other than the
expected "position of a double-dash, if any".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To explicitly remove the sequencer state for a fresh cherry-pick or
revert invocation, introduce a new subcommand called "--reset" to
remove the sequencer state.
Take the opportunity to publicly expose the sequencer paths, and a
generic function called "remove_sequencer_state" that various git
programs can use to remove the sequencer state in a uniform manner;
"git reset" uses it later in this series. Introducing this public API
is also in line with our long-term goal of eventually factoring out
functions from revert.c into a generic commit sequencer.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apart from its central objective of calling into the picking
mechanism, pick_commits creates a sequencer directory, prepares a todo
list, and even acts upon the "--reset" subcommand. This makes for a
bad API since the central worry of callers is to figure out whether or
not any conflicts were encountered during the cherry picking. The
current API is like:
if (pick_commits(opts) < 0)
print "Something failed, we're not sure what"
So, change pick_commits so that it's only responsible for picking
commits in a loop and reporting any errors, leaving the rest to a new
function called pick_revisions. Consequently, the API of pick_commits
becomes much clearer:
act_on_subcommand(opts->subcommand);
todo_list = prepare_todo_list();
if (pick_commits(todo_list, opts) < 0)
print "Error encountered while picking commits"
Now, callers can easily call-in to the cherry-picking machinery by
constructing an arbitrary todo list along with some options.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
