It seems that the ability to use raw roff codes in asciidoc.conf
was eliminated by docbook-xsl 1.72.0 _and later_. Unlike the
1.72.0-specific XSLT problem, this behavior was not reverted in
later releases.
This patch aims to make it clear that the affected asciidoc
attribute (flag) can be reasonably used with docbook-xsl versions
other than 1.72.0.
Also, document which make variables should be set for various
versions of asciidoc and docbook-xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parametrize the backslash and dot characters that are used to
generate roff control sequences in manpage-base.xsl.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of manpage-base.xsl and manpage-normal.xsl gets a copy of
the contents of callouts.xsl and the original is removed. The
Makefile is adjusted to refer to manpage-normal.xsl instead of
callouts.xsl. manpage-base.xsl will be later made into a common
base for -normal and -1.72.
Testing done with asciidoc 8.3.1 and docbook-xsl 1.74.0.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most shells define the exit value of a pipeline as the exit value
of the last process. For each texi rule, run the DOCBOOK2X_TEXI
tool and the "fixup" script in their own non-pipeline commands so
that make will notice an error exit code.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adapts the "quiet make" implementation from the main
Makefile.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fg/push-default:
builtin-push.c: Fix typo: "anythig" -> "anything"
Display warning for default git push with no push.default config
New config push.default to decide default behavior for push
Conflicts:
Documentation/config.txt
* dm/maint-docco:
Documentation: Remove spurious uses of "you" in git-bisect.txt.
Documentation: minor grammatical fix in git-check-ref-format.txt
Documentation: minor grammatical fixes in git-check-attr.txt
Documentation: minor grammatical fixes in git-cat-file.txt
Documentation: minor grammatical fixes and rewording in git-bundle.txt
Documentation: remove some uses of the passive voice in git-bisect.txt
the "--use-separate-remote" option no longer exists, having since
become the default for a clone.
Signed-off-by: Carlo Marcelo Arenas Belon <carenas@sajinet.com.pe>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were added by accident in a42dea3.
This patch also rewords the description of how ranges of commits can be
skipped.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The described issues are compiled from the tests by Michael Haggerty and me.
Because it is not apparent that these can be fixed anytime soon at least warn
unwary users not to rely on the inbuilt cvsimport to much.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already skip over loose refs under $GIT_DIR/refs if the name
ends with ".lock", so creating a branch named "foo.lock" will not
appear in the output of "git branch", "git for-each-ref", nor will
its commit be considered reachable by "git rev-list --all".
In the latter case this is especially evil, as it may cause
repository corruption when objects reachable only through such a
ref are deleted by "git prune".
It should be reasonably safe to deny use of ".lock" as a ref suffix.
In prior versions of Git such branches would be "phantom branches";
you can create it, but you can't see it in "git branch" output.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the rules for refnames to forbid:
(1) a refname that contains "@{" in it.
Some people and foreign SCM converter may have named their branches
as frotz@24 and we still want to keep supporting it.
However, "git branch frotz@{24}" is a disaster. It cannot even
checked out because "git checkout frotz@{24}" will interpret it as
"detach the HEAD at twenty-fourth reflog entry of the frotz branch".
(2) a refname that ends with a dot.
We already reject a path component that begins with a dot, primarily
to avoid ambiguous range interpretation. If we allowed ".B" as a
valid ref, it is unclear if "A...B" means "in dot-B but not in A" or
"either in A or B but not in both".
But for this to be complete, we need also to forbid "A." to avoid "in
B but not in A-dot". This was not a problem in the original range
notation, but we should have added this restriction when three-dot
notation was introduced.
Unlike "no dot at the beginning of any path component" rule, this
rule does not have to be "no dot at the end of any path component",
because you cannot abbreviate the tail end away, similar to you can
say "dot-B" to mean "refs/heads/dot-B".
For these reasons, it is not likely people created branches with these
names on purpose, but we have allowed such names to be used for quite some
time, and it is possible that people created such branches by mistake or
by accident.
To help people with branches with such unfortunate names to recover,
we still allow "branch -d 'bad.'" to delete such branches, and also allow
"branch -m bad. good" to rename them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command may not be the best place to add this new feature, but
$ git check-ref-format --branch "@{-1}"
allows Porcelains to figure out what branch you were on before the last
branch switching.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This specifier represents the sanitized and filename friendly subject
line of a commit. No checks are made against the length of the string,
so users may need to trim the result to the desired length if using as a
filename. This is commonly used by format-patch to massage commit
subjects into filenames and output patches to files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit also converts all reference specifications to a monospaced font,
as the embedded ~ character used in some of the references sometimes causes
the text up to the next ~ to be displayed incorrectly as a subscript when the
HTML pages are generated. This was tested with asciidoc 8.2.5.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation of the post-checkout hook just talks
about git-checkout. But recently git-clone was changed to
call it too, unless the -no-checkout (-n) option is used.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'Everyday GIT' guide was using the old dashed form
of git-init.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dm/maint-docco:
Documentation: reword example text in git-bisect.txt.
Documentation: reworded the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-branch.txt.
Documentation: minor grammatical fixes in git-blame.txt.
Documentation: reword the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-archive.txt.
For example:
git format-patch --numbered-files --stdout --attach HEAD~~
will create two messages with files 1 and 2 attached respectively.
Without --attach/--inline but with --stdout, --numbered-files option
can be simply ignored, because we are not creating any file ourselves.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/parseopt-config:
config: test for --replace-all with one argument and fix documentation.
config: set help text for --bool-or-int
git config: don't allow --get-color* and variable type
git config: don't allow extra arguments for -e or -l.
git config: don't allow multiple variable types
git config: don't allow multiple config file locations
git config: reorganize to use parseopt
git config: reorganize get_color*
git config: trivial rename in preparation for parseopt
git_config(): not having a per-repo config file is not an error
Avoid splitting sentences across examples of command usage.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text was very vague about what exactly it means
for difference to "contain" a change. This seems to cause
confusion on the mailing list every month or two.
To fix it we:
1. use "introduce or remove an instance of" instead of
"contain"
2. point the user to gitdiffcore(7), which contains a more
complete explanation
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the options --committer-date-is-author-date and --ignore-date
to git-rebase. They were introduced in commit a79ec62d0 for git-am.
These options imply --force-rebase.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/color-grep:
grep: prefer builtin over external one when coloring results
grep: cast printf %.*s "precision" argument explicitly to int
grep: add support for coloring with external greps
grep: color patterns in output
grep: add pmatch and eflags arguments to match_one_pattern()
grep: remove grep_opt argument from match_expr_eval()
grep: micro-optimize hit collection for AND nodes
* js/remote-improvements: (23 commits)
builtin-remote.c: no "commented out" code, please
builtin-remote: new show output style for push refspecs
builtin-remote: new show output style
remote: make guess_remote_head() use exact HEAD lookup if it is available
builtin-remote: add set-head subcommand
builtin-remote: teach show to display remote HEAD
builtin-remote: fix two inconsistencies in the output of "show <remote>"
builtin-remote: make get_remote_ref_states() always populate states.tracked
builtin-remote: rename variables and eliminate redundant function call
builtin-remote: remove unused code in get_ref_states
builtin-remote: refactor duplicated cleanup code
string-list: new for_each_string_list() function
remote: make match_refs() not short-circuit
remote: make match_refs() copy src ref before assigning to peer_ref
remote: let guess_remote_head() optionally return all matches
remote: make copy_ref() perform a deep copy
remote: simplify guess_remote_head()
move locate_head() to remote.c
move duplicated ref_newer() to remote.c
move duplicated get_local_heads() to remote.c
...
Conflicts:
builtin-clone.c
* kb/checkout-optim:
Revert "lstat_cache(): print a warning if doing ping-pong between cache types"
checkout bugfix: use stat.mtime instead of stat.ctime in two places
Makefile: Set compiler switch for USE_NSEC
Create USE_ST_TIMESPEC and turn it on for Darwin
Not all systems use st_[cm]tim field for ns resolution file timestamp
Record ns-timestamps if possible, but do not use it without USE_NSEC
write_index(): update index_state->timestamp after flushing to disk
verify_uptodate(): add ce_uptodate(ce) test
make USE_NSEC work as expected
fix compile error when USE_NSEC is defined
check_updates(): effective removal of cache entries marked CE_REMOVE
lstat_cache(): print a warning if doing ping-pong between cache types
show_patch_diff(): remove a call to fstat()
write_entry(): use fstat() instead of lstat() when file is open
write_entry(): cleanup of some duplicated code
create_directories(): remove some memcpy() and strchr() calls
unlink_entry(): introduce schedule_dir_for_removal()
lstat_cache(): swap func(length, string) into func(string, length)
lstat_cache(): generalise longest_match_lstat_cache()
lstat_cache(): small cleanup and optimisation
'git branch -f a b' resets a to b when a exists, rather then deleting a.
Say so in the documentation.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a git push without any refspecs is attempted, display a warning.
The current default behavior is to push all matching refspecs, which
may come as a surprise to new users, so the warning shows how
push.default can be configured and what the possible values are.
Traditionalists who wish to keep the current behaviour are also told
how to configure this once and never see the warning again.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git push" is not told what refspecs to push, it pushes all matching
branches to the current remote. For some workflows this default is not
useful, and surprises new users. Some have even found that this default
behaviour is too easy to trigger by accident with unwanted consequences.
Introduce a new configuration variable "push.default" that decides what
action git push should take if no refspecs are given or implied by the
command line arguments or the current remote configuration.
Possible values are:
'nothing' : Push nothing;
'matching' : Current default behaviour, push all branches that already
exist in the current remote;
'tracking' : Push the current branch to whatever it is tracking;
'current' : Push the current branch to a branch of the same name,
i.e. HEAD.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If literal text (asciidoc `...`) can be rendered in a differently from
normal text for each output format (man, HTML), then we do not need
extra quotes or other wrapping around inline literal text segments.
config.txt
Change '`...`' to `...`. In asciidoc, the single quotes provide
emphasis, literal text should be distintive enough.
Change "`...`" to `...`. These double quotes do not work if present
in the described config value, so drop them.
git-checkout.txt
Change "`...`" to `...` or `"..."`. All instances are command line
argument examples. One "`-`" becomes `-`. Two others are involve
curly braces, so move the double quotes inside the literal region to
indicate that they might need to be quoted on the command line of
certain shells (tcsh).
git-merge.txt
Change "`...`" to `...`. All instances are used to describe merge
conflict markers. The quotes should are not important.
git-rev-parse.txt
Change "`...`" to `...`. All instances are around command line
arguments where no in-shell quoting should be necessary.
gitcli.txt
Change `"..."` to `...`. All instances are around command line
examples or single command arguments. They do not semanticly belong
inside the literal text, and they are not needed outside it.
glossary-content.txt
user-manual.txt
Change "`...`" to `...`. All instances were around command lines.
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword this section to make it less chatty. Also make minor grammatical
fixes.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Option --replace-all only allows at least two arguments, so
documentation was needing to be updated accordingly. A test showing
that the command fails with only one parameter is also provided.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rearrange the example usage of
git filter-branch --index-filter 'git rm --cached ...'
so that --ignore-unmatch is in the main example block. People keep
stumbling over the (lack of this) option to the point where it is a
FAQ, so we would want to expose the most common usage where it stands
out.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-send-email:
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
* tr/format-patch-thread:
format-patch: support deep threading
format-patch: thread as reply to cover letter even with in-reply-to
format-patch: track several references
format-patch: threading test reactivation
Conflicts:
builtin-log.c
As suggested by Junio, disallow the flags PARSE_OPT_KEEP_UNKNOWN and
PARSE_OPT_STOP_AT_NON_OPTION to be turned on at the same time, as a
value of an unknown option could be mistakenly classified as a
non-option, stopping the parser early. E.g.:
git cmd --known --unknown value arg0 arg1
The parser should have stopped at "arg0", but it already stops at
"value".
This patch makes parse_options() die if the two flags are used in
combination.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
builtin-revert.c: release index lock when cherry-picking an empty commit
document config --bool-or-int
t1300: use test_must_fail as appropriate
cleanup: add isascii()
Documentation: fix badly indented paragraphs in "--bisect-all" description
Add the config variable color.grep.external, which can be used to
switch on coloring of external greps. To enable auto coloring with
GNU grep, one needs to set color.grep.external to --color=always to
defeat the pager started by git grep. The value of the config
variable will be passed to the external grep only if it would
colorize internal grep's output, so automatic terminal detected
works. The default is to not pass any option, because the external
grep command could be a program without color support.
Also set the environment variables GREP_COLOR and GREP_COLORS to
pass the configured color for matches to the external grep. This
works with GNU grep; other variables could be added as needed.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coloring matches makes them easier to spot in the output.
Add two options and two parameters: color.grep (to turn coloring on
or off), color.grep.match (to set the color of matches), --color
and --no-color (to turn coloring on or off, respectively).
The output of external greps is not changed.
This patch is based on earlier ones by Nguyễn Thái Ngọc Duy and
Thiago Alves.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation is just a pointer to the --bool and --int
options, but it makes sense to at least mention that it
exists.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the following:
- git config value blame.date that expects one of the git log date
formats (e.g. relative,local,default,iso,...);
- git blame command line option --date expects one of the git
log date formats;
- documentation in blame-options.txt;
- git blame uses the appropriate date.c functions and enums to
make sense of the date format and provide appropriate data;
git blame continues to line up the output columns by padding the date
column up to the max width of the chosen date format.
The date format for git blame without both blame.date and --date continues
to be ISO for backwards compatibility.
git annotate ignores the date format specifiers and continues to uses the
ISO format, as before.
Signed-off-by: Eugene Letuchy <eugene@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ns/pretty-format:
bash completion: add --format= and --oneline options for "git log"
Add tests for git log --pretty, --format and --oneline.
Add --oneline that is a synonym to "--pretty=oneline --abbrev-commit"
Give short-hands to --pretty=tformat:%formatstring
Add --format that is a synonym to --pretty
* js/send-email:
send-email: add --confirm option and configuration setting
send-email: don't create temporary compose file until it is needed
send-email: --suppress-cc improvements
send-email: handle multiple Cc addresses when reading mbox message
send-email: allow send-email to run outside a repo
Including passing parameters to the programs, and running more
complicated checks without requiring a seperate shell script.
Signed-off-by: John Tapsell <johnflux@gmail.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When archiving a repository there is no way to specify a file as output.
This patch adds a new option "--output" that redirects the output to a
file instead of stdout.
Signed-off-by: Carlos Manuel Duclos Vergara <carlos.duclos@nokia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a comment that the web interface wraps the lines
Signed-off-by: John Tapsell <johnflux@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These may not be obvious to non-native English speakers
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email violates the principle of least surprise by automatically
cc'ing additional recipients without confirming this with the user.
This patch teaches send-email a --confirm option. It takes the
following values:
--confirm=always always confirm before sending
--confirm=never never confirm before sending
--confirm=cc confirm before sending when send-email has
automatically added addresses from the patch to
the Cc list
--confirm=compose confirm before sending the first message when
using --compose. (Needed to maintain backwards
compatibility with existing behavior.)
--confirm=auto 'cc' + 'compose'
If sendemail.confirm is unconfigured, the option defaults to 'compose'
if any suppress-Cc related options have been used, otherwise it defaults
to 'auto'.
Unfortunately, it is impossible to introduce this patch such that it
helps new users without potentially annoying some existing users. We
attempt to mitigate the latter by:
* Allowing the user to set 'git config sendemail.confirm never'
* Allowing the user to say 'all' after the first prompt to not be
prompted on remaining emails during the same invocation.
* Telling the user about the 'sendemail.confirm' setting if it is
unconfigured whenever we prompt due to Cc before sending.
* Only prompting if no --suppress related options have been passed, as
using such an option is likely to indicate an experienced send-email
user.
There is a slight fib in message informing the user of the
sendemail.confirm setting and this is intentional. Setting 'auto'
differs from leaving sendemail.confirm unset in two ways: 1) 'auto'
obviously squelches the informational message; 2) 'auto' prompts when
the Cc list has been expanded even in the presence of a --suppress
related option, where leaving sendemail.confirm unset does not. This is
intentional to keep the message simple, and to avoid adding another
sendemail.confirm value ('auto-except-suppress'?).
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior of --verbose is unchanged, but uses a different state
variable internally, so that the meaning of verbose output may be
expanded without affecting the diffstat. This is also reflected in
the documentation.
The configuration option rebase.stat works the same was as merg.stat,
but the default is currently false.
Signed-off-by: Tor Arne Vestbø <torarnv@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final hunk in this patch corrects what appears to be a typo:
of --> or
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parameters accepted by the --whitespace option of "git apply" have
changed over time, and the documentation for "git rebase" was out of
sync. Remove the specific parameter list from the "git rebase"
documentation and simply point to the "git apply" documentation for
details, as is already done in the "git am" documentation.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Provide a porcelain command for setting and deleting
$GIT_DIR/remotes/<remote>/HEAD.
While we're at it, document what $GIT_DIR/remotes/<remote>/HEAD is all
about.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rules how the patterns are matched against path names are the same
for .gitattribute and .gitignore files.
This also replace the notion "glob pattern" by "pattern" because
gitignore.txt talks about "glob" only in some contexts where the pattern
is mentioned.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two are often used together but are too long to type.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow --pretty="%h %s" (and --format="%h %s") as shorthand for an often
used option --pretty=tformat:"%h %s".
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some people prefer to call the pretty-print styles "format", and get
annoyed to see "git log --format=short" fail. Introduce it as a synonym
to --pretty so that both can be used.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit url for dcommit is determined in the following order:
commandline option --commit-url
svn.commiturl
svn-remote.<name>.commiturl
svn-remote.<name>.url
Signed-off-by: Peter Oberndorfer <kumbayo84@arcor.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
For deep threading mode, i.e., the mode that gives a thread structured
like
+ [PATCH 0/n] Cover letter
`-+ [PATCH 1/n] First patch
`-+ [PATCH 2/n] Second patch
`-+ ...
we currently have to use 'git send-email --thread' (the default). On
the other hand, format-patch also has a --thread option which gives
shallow mode, i.e.,
+ [PATCH 0/n] Cover letter
|-+ [PATCH 1/n] First patch
|-+ [PATCH 2/n] Second patch
...
To reduce the confusion resulting from having two indentically named
features in different tools giving different results, let format-patch
take an optional argument '--thread=deep' that gives the same output
as 'send-mail --thread'. With no argument, or 'shallow', behave as
before. Also add a configuration variable format.thread with the same
semantics.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Talking about --date, one thing I wanted for the 1234567890 date was to
get things in the raw format. Sure, you get them with --pretty=raw, but it
felt a bit sad that you couldn't just ask for the date in raw format.
So here's a throw-away patch (meaning: I won't be re-sending it, because I
really don't think it's a big deal) to add "--date=raw". It just prints
out the internal raw git format - seconds since epoch plus timezone (put
another way: 'date +"%s %z"' format)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was introduced in 85af7929ee but
not documented outside the commit message.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tests: fix "export var=val"
Skip timestamp differences for diff --no-index
Documentation/git-push: --all, --mirror, --tags can not be combined
The underlying plumbing commands are not run with -z option, so the paths
returned from them need to be unquoted as needed.
Remove the now stale BUGS section from git-add documentaiton as suggested
by Teemu Likonen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While b259f09 made git-push output a better error message for 'git-push
--all --tags', this commit fixes the synopsis in the documentation.
Inconsistency spotted and fix suggested by Jari Aalto through
http://bugs.debian.org/502567
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ms/mailmap:
Move mailmap documentation into separate file
Change current mailmap usage to do matching on both name and email of author/committer.
Add map_user() and clear_mailmap() to mailmap
Add find_insert_index, insert_at_index and clear_func functions to string_list
Add mailmap.file as configurational option for mailmap location
Many e-mail based development communities require non-flowed text to carry
patches to prevent whitespaces from getting mangled, but there is no easy
way to tell Thunderbird MUA not to use format=flowed, unless you configure
it to do so unconditionally for all outgoing mails.
A workaround for users who use git-imap-send is to wrap the patch in "pre"
element in the draft folder as an HTML message, and tell Thunderbird to
send "text only". Thunderbird turns such a message into a non-flowed
plain text when sending it out, which is what we want for patch e-mails.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 6564828 (git-send-email: Generalize auto-cc recipient
mechanism., 2007-12-25) we can suppress automatic Cc generation
separately for each of the possible address sources. However,
--suppress-cc=sob suppressed both SOB lines and body (but not header)
Cc lines, contrary to the name.
Change --suppress-cc=sob to mean only SOB lines, and add separate
choices 'bodycc' (body Cc lines) and 'body' (both 'sob' and 'bodycc').
The option --no-signed-off-by-cc now acts like --suppress-cc=sob,
which is not backwards compatible but matches the name of the option.
Also update the documentation and add a few tests.
Original patch by me. Revised by Thomas Rast, who contributed the
documentation and test updates.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a section about how to shrink a repository's size after running
git-filter-branch to remove large blobs from history.
This comes up every week or so on IRC, and the commands required to
handle every case are not very newbie-friendly, so hopefully writing
them down somewhere leads to fewer questions.
It may seem contradictory to document fallbacks for older Gits in
newer docs, but we want to point people at this as a FAQ answer, and
they will frequently not have the newest version installed.
Thanks to Björn Steinbrink and Junio C Hamano for comments and
corrections.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, "git gc --no-prune" will not prune any loose (and
dangling) object, and "git gc --prune=5.minutes.ago" will prune
all loose objects older than 5 minutes.
This patch benefitted from suggestions by Thomas Rast and Jan Krï¿œger.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Prepare for 1.6.1.4.
Make repack less likely to corrupt repository
fast-export: ensure we traverse commits in topological order
Clear the delta base cache if a pack is rebuilt
Conflicts:
RelNotes
Since dbc6c74d08, git-svn has had
an expensive check for broken symlinks that exist in some
repositories. This leads to a heavy performance hit on
repositories with many empty blobs that are not supposed to be
symlinks.
The workaround is enabled by default; and may be disabled via:
git config svn.brokenSymlinkWorkaround false
Reported by Markus Heidelberg.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Swap function argument pair (length, string) into (string, length) to
conform with the commonly used order inside the GIT source code.
Also, add a note about this fact into the coding guidelines.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although it does not matter in general it is handled different by
"git clone", as it removes it to make the "humanish" name of the
new repository.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea was originated by discussion about usability of manually
editing the config file in 'special needs' systems such as Windows. Now
the user can forget a bit about where the config files actually are.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include it directly from git-shortlog.txt, and refer
to it from pretty-format.txt.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
map_user() allows to lookup and replace both email and
name of a user, based on a new style mailmap file.
The possible mailmap definitions are now:
proper_name <commit_email> # Old style
<proper_email> <commit_email> # New style
proper_name <proper_email> <commit_email> # New style
proper_name <proper_email> commit_name <commit_email> # New style
map_email() operates the same as before, with the
exception that it also will to try to match on a name
passed in through the name return buffer.
clear_mailmap() is needed to now clear the more complex
mailmap structure.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows us to augment the repo mailmap file, and to use
mailmap files elsewhere than the repository root. Meaning
that the entries in mailmap.file will override the entries
in "./.mailmap", should they match.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git submodule update --no-fetch makes it possible to use git submodule
update in complete offline mode by not fetching new revisions.
This does make sense in the following setup:
* There is an unstable and a stable branch in the super/master repository.
* The submodules might be at different revisions in the branches.
* You are at some place without internet connection ;)
With this patch it is now possible to change branches and update
the submodules to be at the recorded revision without online access.
Another advantage is that with -N the update operation is faster, because fetch is checking for new updates even if there was no fetch/pull on the super/master repository since the last update.
Signed-off-by: Fabian Franz <git@fabian-franz.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/notes:
git-notes: fix printing of multi-line notes
notes: fix core.notesRef documentation
Add an expensive test for git-notes
Speed up git notes lookup
Add a script to edit/inspect notes
Introduce commit notes
Conflicts:
pretty.c
Print interaction error messages in color.interactive.error, which
defaults to the value of color.interactive.help.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use Term::ReadKey, if available and enabled with interactive.singlekey,
to let the user answer add -p's prompts by pressing a single key. We're
not doing the same in the main 'add -i' interface because file selection
etc. may expect several characters.
Two commands take an argument: 'g' can easily cope since it'll just
offer a choice of chunks. '/' now (unconditionally, even without
readkey) offers a chance to enter a regex if none was given.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rewrites the example part of the bundle doucmentation to follow
the suggestion made by Junio during a recent discussion (gmane 108030).
Instead of just showing different ways to create and use bundles in a
disconnected fashion, the rewritten example first shows the simplest
"full cycle" of sneakernet workflow, and then introduces various
variations.
The words are mostly taken from Junio's outline. I only reformatted
them and proofread to make sure the end result flows naturally.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
urls.txt: document optional port specification in git URLS
builtin-mv.c: check for unversionned files before looking at the destination.
Add a testcase for "git mv -f" on untracked files.
Missing && in t/t7001.sh.
* maint:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
Conflicts:
Makefile
* maint-1.6.0:
User-manual: "git stash <comment>" form is long gone
add test-dump-cache-tree in Makefile
fix typo in Documentation
apply: fix access to an uninitialized mode variable, found by valgrind
These days you must explicitly say "git stash save <comment>".
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the example, Joe Developer has <joe@example.com> as his email,
but in the .mailmap is <joe@random.com>. Use example.com instead.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This functions similarly to "git branch --contains"; it will show all
tags that contain the specified commit, by sharing the same logic.
The patch also adds documentation and tests for the new option.
Signed-off-by: Jake Goulding <goulding@vivisimo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The document suggests to imitate the existing code, but didn't
say which existing code it should imitate. This clarifies.
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This tries to make the description of ref matching in git push easier
to read. Beauty is in the eye of the beholder, though.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include examples of using HEAD. The order of examples
introduces new concepts one by one. This pushes the
example of deleting a ref to the end of the list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The refspec format description was a mix of regexp and BNF, making it
very difficult to read. The format was also wrong: it did not show
that each part of a refspec is optional in different situations.
Rather than having a confusing grammar, just present the format in
informal prose.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the tutorial Alice initializes the repository, and Bob clones it. So
Bob can just do a 'git pull', but Alice will need 'git pull <url>
<branch>'.
The note suggested that the branch parameter is not necessary, which is
no longer true these days.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option tells 'git-am' to ignore the date header field
recorded in the format-patch output. The commits will have the
timestamp when they are created instead.
You can work a lot in one day to accumulate many changes, but
apply and push to the public repository only some of them at
the end of the first day. Then next day you can spend all your
working hours reading comics or chatting with your coworkers,
and apply your remaining patches from the previous day using
this option to pretend that you have been working at the end
of the day.
Signed-off-by: しらいしななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/diff-color-words:
Change the spelling of "wordregex".
color-words: Support diff.wordregex config option
color-words: make regex configurable via attributes
color-words: expand docs with precise semantics
color-words: enable REG_NEWLINE to help user
color-words: take an optional regular expression describing words
color-words: change algorithm to allow for 0-character word boundaries
color-words: refactor word splitting and use ALLOC_GROW()
Add color_fwrite_lines(), a function coloring each line individually
Documented --ignore-paths option of git-svn to inform users about
the feature and provide some examples.
Signed-off-by: Vitaly "_Vi" Shukela <public_vi@tut.by>
Acked-by: Eric Wong <normalperson@yhbt.net>
[ew: trailing whitespace removed]
* am/maint-push-doc:
Documentation: avoid using undefined parameters
Documentation: mention branches rather than heads
Documentation: remove a redundant elaboration
Documentation: git push repository can also be a remote
With --reject, git-am simply passes the --reject option to git-apply and thus
allows people to work with reject files if they so prefer.
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for git-describe says the default abbreviation is 8
hexadecimal digits while cache.c clearly shows DEFAULT_ABBREV set to 7.
This patch corrects the documentation.
Signed-off-by: Boyd Stephen Smith Jr <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "wordRegex" for configuration variable names. Use "word_regex" for C
language tokens.
Signed-off-by: Boyd Stephen Smith Jr. <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* am/maint-push-doc:
Documentation: avoid using undefined parameters
Documentation: mention branches rather than heads
Documentation: remove a redundant elaboration
Documentation: git push repository can also be a remote
* sb/hook-cleanup:
run_hook(): allow more than 9 hook arguments
run_hook(): check the executability of the hook before filling argv
api-run-command.txt: talk about run_hook()
Move run_hook() from builtin-commit.c into run-command.c (libgit)
checkout: don't crash on file checkout before running post-checkout hook
When diff is invoked with --color-words (w/o =regex), use the regular
expression the user has configured as diff.wordregex.
diff drivers configured via attributes take precedence over the
diff.wordregex-words setting. If the user wants to change them, they have
their own configuration variables.
Signed-off-by: Boyd Stephen Smith Jr <bss@iguanasuicide.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All the other config variables use CamelCase. This config variable should
not be an exception.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit c5ee71f (commit: more compact summary and without extra
quotes, 2009-01-19) changed the "git commit" output when creating a
commit. This patch updates the example session in the tutorial to match
the new output.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-shell's man page explicitly lists all allowed commands, but 'cvs
server' was missing. Add it.
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default git-svn stores timestamps of fetched commits in
Subversion's UTC format. Passing --localtime to fetch will convert
them to the timezone of the server on which git-svn is run.
This makes the timestamps of a resulting "git log" agree with what
"svn log" shows for the same repository.
Signed-off-by: Pete Harlan <pgit@pcharlan.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
The <ref> parameter has not been introduced, so rewrite to
avoid it.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "matching refs" semantics works only on matching branches these days.
Instead of using "heads" which traditionally has been used more or less
interchangeably with "refs", say "branch" explicitly here.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment in parentheses is wrong, as one has to leave out both the
colon and <dst>. This situation is covered by the section a few lines
down:
A parameter <ref> without a colon pushes the <ref> from the source
repository to the destination repository under the same name.
So, just remove the parentheses.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is copied from pull-fetch-param.txt and helps the reader
to not get stuck in the URL section.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/rebase-root:
rebase: update documentation for --root
rebase -i: learn to rebase root commit
rebase: learn to rebase root commit
rebase -i: execute hook only after argument checking
* maint:
Update draft release notes for 1.6.1.1
builtin-fsck: fix off by one head count
t5540: clarify that http-push does not handle packed-refs on the remote
http-push: when making directories, have a trailing slash in the path name
http-push: fix off-by-path_len
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
* maint-1.6.0:
builtin-fsck: fix off by one head count
Documentation: let asciidoc align related options
githooks.txt: add missing word
builtin-commit.c: do not remove COMMIT_EDITMSG
Have '-' mean the same as '@{-1}', i.e., the last branch we were on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let get_sha1() parse the @{-N} syntax, with docs and tests.
Note that while @{-1}^2, @{-2}~5 and such are supported, @{-1}@{1} is
currently not allowed.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixes the description of the -t option in git-mergetool, which
failed to hint that it takes an argument.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the only colors available to --pretty=format
users are red, green, and blue. Rather than expand it with a
few new colors, this patch makes the usual config color
syntax available, including more colors, backgrounds, and
attributes.
Because colors are no longer bounded to a single word (e.g.,
%Cred), this uses a more advanced syntax that features a
beginning and end delimiter (but the old syntax still
works). So you can now do:
git log --pretty=tformat:'%C(yellow)%h%C(reset) %s'
to emulate --pretty=oneline, or even
git log --pretty=tformat:'%C(cyan magenta bold)%s%C(reset)'
if you want to relive the awesomeness of 4-color CGA.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Command line options can share the same paragraph of description, if
they are related or synonymous. In these cases they should be written
among each other, so that asciidoc can format them itself.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the --color-words splitting regular expression configurable via
the diff driver's 'wordregex' attribute. The user can then set the
driver on a file in .gitattributes. If a regex is given on the
command line, it overrides the driver's setting.
We also provide built-in regexes for the languages that already had
funcname patterns, and add an appropriate diff driver entry for C/++.
(The patterns are designed to run UTF-8 sequences into a single chunk
to make sure they remain readable.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some applications, words are not delimited by white space. To
allow for that, you can specify a regular expression describing
what makes a word with
git diff --color-words='[A-Za-z0-9]+'
Note that words cannot contain newline characters.
As suggested by Thomas Rast, the words are the exact matches of the
regular expression.
Note that a regular expression beginning with a '^' will match only
a word at the beginning of the hunk, not a word at the beginning of
a line, and is probably not what you want.
This commit contains a quoting fix by Thomas Rast.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.6.1.1
Make t3411 executable
fix handling of multiple untracked files for git mv -k
add test cases for "git mv -k"
Some instances replaced by "handful of", others use
the word "few", a couple get a slight rewording.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path format was inconsistent with the one used in git-notes.sh: it
supposedly split the sha1 in the same 2/38 format that .git/objects
uses, but the code uses the full sha1 without a path separator.
While at it, also fix a grammatical error.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to a200337 (git-am: propagate -C<n>, -p<n> options as well,
2008-12-04) and commits around it, "git am" is equipped to correctly
propagate the command line flags such as -C/-p/-whitespace across a patch
failure and restart.
It is trivial to support --directory option now, resurrecting previous
attempts by Kevin and Simon.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the new option depends on --onto and omission of <upstream>, use
a separate invocation style, and omit most options to save space.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_commit_non_empty_tree is added to the functions that can be run from
commit filters. Its effect is to commit only commits actually touching the
tree and that are not merge points either.
The option --prune-empty is added. It defaults the commit-filter to
'git_commit_non_empty_tree "$@"', and can be used with any other
combination of filters, except --commit-hook that must used
'git_commit_non_empty_tree "$@"' where one puts 'git commit-tree "$@"'
usually to achieve the same result.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches Git to produce diff output using the patience diff
algorithm with the diff option '--patience'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make all strbuf functions that can fail free() their memory on error if
they have allocated it. They don't shrink buffers that have been grown,
though.
This allows for easier error handling, as callers only need to call
strbuf_release() if A) the command succeeded or B) if they would have had
to do so anyway because they added something to the strbuf themselves.
Bonus hunk: document strbuf_readlink.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tar handles switches with and witout preceding '-', but the
documentation should be consistent nonetheless.
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Linux kernel and Emacs are both spelled capitalized
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cvsserver annotates each commit message by "via git-CVS emulator". This is
made configurable via gitcvs.commitmsgannotation.
Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de>
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/mergetool:
mergetool: Don't keep temporary merge files unless told to
mergetool: Add prompt to continue after failing to merge a file
Add -y/--no-prompt option to mergetool
Fix some tab/space inconsistencies in git-mergetool.sh
When there is no grace period before pruning unreferenced objects, it is
pointless to push those objects in their loose form just to delete them
right away.
Also be more explicit about the possibility of using "now" in the
gc.pruneexpire config variable (needed for the above behavior to
happen).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The upstream branch <upstream> now defaults to the first tracked
remote branch, which is set by the configuration variables
branch.<name>.remote and branch.<name>.merge of the current branch.
Without such a remote branch, the command "git cherry [-v]" fails with
usage output as before and an additional message.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only incompatible change is that the user how have to use '--'
before a patch file if it is named "--build-fake-ancestor=something".
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of listing short option (e.g. "-U<n>") as a shorthand for its
longer counterpart (e.g. "--unified=<n>"), list the synonyms together. It
saves one indirection to find what the reader wants.
Signed-off-by: jidanni <jidanni@jidanni.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable was added in 5f8b9fc (git-send-email: add a new
sendemail.cc configuration variable, 2008-04-27), but is not yet refered
to by the documentation.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge two hunks if there is only the specified number of otherwise unshown
context between them. For --inter-hunk-context=1, the resulting patch has
the same number of lines but shows uninterrupted context instead of a
context header line in between.
Patches generated with this option are easier to read but are also more
likely to conflict if the file to be patched contains other changes.
This patch keeps the default for this option at 0. It is intended to just
make the feature available in order to see its advantages and downsides.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"makeinfo" failed to generate gitman.info from gitman.texi input file
because the combined manual page file contains several nodes with the
same name (DESCRIPTION, OPTIONS, SEE ALSO etc.). An Info document should
contain unique node names.
This patch creates a simple (read: ugly) work-around by suppressing the
validation of the final Info file. Jumping to nodes in the Info document
still works but they are not very useful. Common man-page headings like
DESCRIPTION and OPTIONS appear in the Info node list and they point to
the man page where they appear first (that is git-add currently).
Also, this patch adds directory-entry information for Info document to
make the document appear in the top-level Info directory.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously "docbook2x-texi" failed to generate user-manual.texi and
gitman.texi files from .xml input files because "iconv" stopped at
"illegal input sequence" error. This was due to some UTF-8 octets in the
input .xml files. This patch adds option --encoding=UTF-8 for
"docbook2x-texi" to allow the building of .texi files complete.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-send-email.txt: move --format-patch paragraph to a proper location
git-shortlog.txt: improve documentation about .mailmap files
pretty: support multiline subjects with format:
pretty: factor out format_subject()
pretty: factor out skip_empty_lines()
merge-file: handle freopen() failure
daemon: cleanup: factor out xstrdup_tolower()
daemon: cleanup: replace loop with if
daemon: handle freopen() failure
describe: Avoid unnecessary warning when using --all
When introducing --format-patch, its documentation was accidentally inserted
in the middle of documentation for --validate.
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description on .mailmap made it seem like they are only useful for
commits with a wrong address for an author, but they are about fixing the
real name. Explain this better in the text, and replace the existing
example with a new one that hopefully makes things clearer.
Signed-off-by: Adeodato Simó <dato@net.com.org.es>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The straightforward way with using 'cat .git/refs/heads/*' doesn't work
with packed refs as well as branches of the form topic/topic1. So let's
use git-for-each-ref for getting the heads' SHA1s in this example.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script 'git notes' allows you to edit and show commit notes, by
calling either
git notes show <commit>
or
git notes edit <commit>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit notes are blobs which are shown together with the commit
message. These blobs are taken from the notes ref, which you can
configure by the config variable core.notesRef, which in turn can
be overridden by the environment variable GIT_NOTES_REF.
The notes ref is a branch which contains "files" whose names are
the names of the corresponding commits (i.e. the SHA-1).
The rationale for putting this information into a ref is this: we
want to be able to fetch and possibly union-merge the notes,
maybe even look at the date when a note was introduced, and we
want to store them efficiently together with the other objects.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The displayed example is typeset with acute accents around the string that
should be surrounded by a pair of single quotes in manpage. Replace them
with double quotes (the semantics of the example does not change).
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus and Junio explained issues that are involved in reverting a merge
and how to continue working with a branch that was updated since such a
revert on the mailing list. This is to help new people who did not see
these messages.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: the original patch was against master but 99% of it
applied to maint; this commit splits out the part that
applies only to master.]
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When no tagger was found (old Git produced tags like this),
no "tagger" line is printed (but this is incompatible with the current
git fast-import).
Alternatively, you can pass the option --fake-missing-tagger, forcing
fast-export to fake a tagger
Unspecified Tagger <no-tagger>
with a tag date of the beginning of (Unix) time in the case of a missing
tagger, so that fast-import is still able to import the result.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Especially with something that is supposed to hopefully have some legal
value down the line if somebody starts making noises, it really would be
nice to have a real person to associate things with. Suggest this in the
SubmittingPatches document.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't confuse the user with old git messages.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS section of the manual writes:
git checkout [options] [<tree-ish>] [--] <paths>...
but the DESCRIPTION says that this form checks the paths out "from the
index, or from a named commit." A later sentence refers to the same
argument as "<tree-ish> argument", but it is not clear that these two
sentences are talking about the same command line argument for first-time
readers.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a freshly initialized repo it is only necessary to rename the .sample
hooks, but when using older repos (initialized with older git init)
enabled the +x mode is still necessary - docuement this.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "Interrupted workflow" situation is a good example for using
git-stash.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since f98f8cb (Ship sample hooks with .sample suffix, 2008-06-24) hooks
are not enabled by making them executable anymore, but by removing the
'.sample' suffix from the filename.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use '{tilde}' instead of '~', becase the later does not appear in the
manpage version, just in the HTML one.
Noticed by gonzzor on IRC.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now git gui has a customizable Tools menu, so this adds
information about variables that are used to configure it.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes git mergetool to remove the temporary files used to invoke
the merge tool even if it returns non-zero.
This also adds a configuration option (mergetool.keepTemporaries) to
retain the previous behaviour if desired.
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use dblatex in order to create a pdf version of the git user manual. No
existing Makefile targets (including "all") are touched, so you need to
explicitly say
make pdf
sudo make install-pdf
to get user-manual.pdf created and installed.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit log message for the feature made it sound as if this is a saner
version of --mixed, but the use case presented makes it clear that it is a
better variant of --hard when your changes and somebody else's changes are
mixed together.
Perhaps we would want to rewrite the example that shows the use of --hard
not to talk about recovering from a failed merge?
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve some minor language and format issues like hyphenation,
phrases, spacing, word order, comma, attributes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It appears that a reference to an anchor defined as [[anchor-name]] from
another place using <<anchor-name>> syntax, when the anchor name contains
a string "-with-" in its name, triggers these warnings from Python
interpreter.
asciidoc -b docbook -d book user-manual.txt
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
<string>:1: Warning: 'with' will become a reserved keyword in Python 2.6
There currently is no reference to "Finding comments with given content",
but for consistency and for futureproofing, the anchor is also updated as
the other ones that are actually used and trigger these warnings.
Signed-off-by: Junio C Hamano <junio@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting with asciidoc 8.3.0 linkgit macro is no longer recognized by
asciidoc and user guide suggests
(http://www.methods.co.nz/asciidoc/userguide.html#_macro_definitions)
that macros are supposed to be defined in [macros] section. I'm not
sure whether undefined linkgit macro was working by pure chance or it
is a regression in asciidoc 8.3.0, but this patch adds proper
definition for the linkgit macro, allowing it to work on 8.3.0.
Signed-off-by: Alexey Borzenkov <snaury@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A handful of fixes have been backmerged to 'maint' and are now contained
in 1.6.0.X series as the result, so drop them from this document.
Also contains typofix and duplicate removal pointed out by
Bjørn Lindeijer and Jakub Narebski.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.6.0.5
"git diff <tree>{3,}": do not reverse order of arguments
tag: delete TAG_EDITMSG only on successful tag
gitweb: Make project specific override for 'grep' feature work
http.c: use 'git_config_string' to get 'curl_http_proxy'
fetch-pack: Avoid memcpy() with src==dst
* bc/maint-keep-pack:
repack: only unpack-unreachable if we are deleting redundant packs
t7700: test that 'repack -a' packs alternate packed objects
pack-objects: extend --local to mean ignore non-local loose objects too
sha1_file.c: split has_loose_object() into local and non-local counterparts
t7700: demonstrate mishandling of loose objects in an alternate ODB
builtin-gc.c: use new pack_keep bitfield to detect .keep file existence
repack: do not fall back to incremental repacking with [-a|-A]
repack: don't repack local objects in packs with .keep file
pack-objects: new option --honor-pack-keep
packed_git: convert pack_local flag into a bitfield and add pack_keep
t7700: demonstrate mishandling of objects in packs with a .keep file
This comes from conversation at the GitTogether where we thought it would
be helpful to be able to teach people to 'stage' files because it tends
to cause confusion when told that they have to keep 'add'ing them.
This continues the movement to start referring to the index as a
staging area (eg: the --staged alias to 'git diff'). Also adds a
doc file for 'git stage' that basically points to the docs for
'git add'.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/strbuf-expand:
remove the unused files interpolate.c and interpolate.h
daemon: deglobalize variable 'directory'
daemon: inline fill_in_extra_table_entries()
daemon: use strbuf_expand() instead of interpolate()
merge-recursive: use strbuf_expand() instead of interpolate()
add strbuf_expand_dict_cb(), a helper for simple cases
* ph/send-email:
git send-email: ask less questions when --compose is used.
git send-email: add --annotate option
git send-email: interpret unknown files as revision lists
git send-email: make the message file name more specific.
I figured the sections might as well be in some order, so I chose alphabetical
but with "core" at the beginning. This should help people add new variables
in the right places.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new callback function strbuf_expand_dict_cb() can be used together
with strbuf_expand() if there is only a small number of placeholders
for static replacement texts. It expects its dictionary as an array of
placeholder+value pairs as context parameter, terminated by an entry
with the placeholder member set to NULL.
The new helper is intended to aid converting the remaining calls of
interpolate(). strbuf_expand() is smaller, more flexible and can be
used to go faster than interpolate(), so it should replace the latter.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation for -n implies that -x is normally
used, however this is no longer true.
Signed-off-by: Bryan Drewery <bryan@shatow.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Added simple descriptions of these options (based on description of --all).
Signed-off-by: Mark Burton <markb@ordern.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Talking about "git help" is useful because it has a few more
features (like when using it without arguments or with "-a") and
it may work on non unix like platforms.
Also add a few links to git-help(1) in "See also" sections.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Talking about "git help" is useful because it has a few more
features (like when using it without arguments or with "-a") and
it may work on non unix like platforms.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation: git-svn: fix example for centralized SVN clone
Documentation: fix links to "everyday.html"
revision.c: use proper data type in call to sizeof() within xrealloc
The example that tells users how to centralize the effort of the initial
git svn clone operation doesn't work properly. It uses rebase but that
only works if HEAD exists. This adds one extra command to create a
somewhat sensible HEAD that should work in all cases.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some places the links are wrong. They should be:
"link:everyday.html", instead of: "linkgit:everyday[7]".
This patch fixes that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -A option calls pack-objects with the --unpack-unreachable option so
that the unreachable objects in local packs are left in the local object
store loose. But if the -d option to repack was _not_ used, then these
unpacked loose objects are redundant and unnecessary.
Update tests in t7701.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add information on new git-gui and gitk command-line options,
configuration variables, and the encoding attribute.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option lets git mergetool invoke the conflict resolution program
without waiting for a user prompt each time.
Also added a mergetool.prompt (default true) configuration variable
controlling the same behaviour
Signed-off-by: Charles Bailey <charles@hashpling.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can do the lstat() storm in parallel, giving potentially much
improved performance for cold-cache cases or things like NFS that have
weak metadata caching.
Just use "read_cache_preload()" instead of "read_cache()" to force an
optimistic preload of the index stat data. The function takes a
pathspec as its argument, allowing us to preload only the relevant
portion of the index.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement git-pull --quiet and git-pull --verbose by
adding the options to git-pull and fixing verbosity
handling in git-fetch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-keep-pack:
t7700: test that 'repack -a' packs alternate packed objects
pack-objects: extend --local to mean ignore non-local loose objects too
sha1_file.c: split has_loose_object() into local and non-local counterparts
t7700: demonstrate mishandling of loose objects in an alternate ODB
builtin-gc.c: use new pack_keep bitfield to detect .keep file existence
repack: do not fall back to incremental repacking with [-a|-A]
repack: don't repack local objects in packs with .keep file
pack-objects: new option --honor-pack-keep
packed_git: convert pack_local flag into a bitfield and add pack_keep
t7700: demonstrate mishandling of objects in packs with a .keep file
* mv/remote-rename:
git-remote: document the migration feature of the rename subcommand
git-remote rename: migrate from remotes/ and branches/
remote: add a new 'origin' variable to the struct
Implement git remote rename
* lt/decorate:
rev-list documentation: clarify the two parts of history simplification
Document "git log --simplify-by-decoration"
Document "git log --source"
revision traversal: '--simplify-by-decoration'
Make '--decorate' set an explicit 'show_decorations' flag
revision: make tree comparison functions take commits rather than trees
Add a 'source' decorator for commits
Conflicts:
Documentation/rev-list-options.txt
* maint:
Start 1.6.0.5 cycle
Fix pack.packSizeLimit and --max-pack-size handling
checkout: Fix "initial checkout" detection
Remove the period after the git-check-attr summary
Conflicts:
RelNotes
One set of options and parameters determine what commits are involved in
the simplification process, and another set of options determine how the
simplification is done. Clarify their distinction at the beginning.
Signed-off-by: Santi Béjar <santi@agolina.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The period at the end of the git-check-attr summary causes there to be
two periods after the summary in the git(1) manual page.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, --local means pack only local objects that are not already
packed.
Additionally, this fixes t7700 testing whether loose objects in an alternate
object database are repacked.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a new option to pack-objects which will cause it to ignore an
object which appears in a local pack which has a .keep file, even if it
was specified for packing.
This option will be used by the porcelain repack.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --compose is used, we can grab the From/Subject/In-Reply-To from the
edited summary, let it be so and don't ask the user silly questions.
The summary templates gets quite revamped, and includes the list of
patches subjects that are going to be sent with this batch.
When having a body full of empty lines, the summary isn't sent. Document
that in the git-send-email manpage fully.
Note: It doesn't deal with To/Cc/Bcc yet.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to review every patch (and fix various aspects of them, or
comment them) in an editor just before being sent. Combined to the fact
that git send-email can now process revision lists, this makes git
send-email and efficient way to review and send patches interactively.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Filter out all the arguments git-send-email doesn't like to a
git format-patch command, that dumps its content to a safe directory.
Barf when a file/revision conflict occurs, allow it to be overriden
--[no-]format-patch.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current git versions ignore everything after # (called <head> in the
following) when pushing. Older versions (before cf818348f1),
interpret #<head> as part of the URL, which make git bail out.
As branches origin from Cogito, it is the best to correct this by using
the behaviour of cg-push, that is to push HEAD to remote refs/heads/<head>.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation: bisect: change a few instances of "git-cmd" to "git cmd"
Documentation: rev-list: change a few instances of "git-cmd" to "git cmd"
checkout: Don't crash when switching away from an invalid branch.
Pushing into the currently checked out branch of a non-bare
repository can be dangerous; the HEAD then loses sync with
the index and working tree, and it looks in the receiving
repo as if the pushed changes have been reverted in the
index (since they were never there in the first place).
This patch adds a safety valve that checks for this
condition and either generates a warning or denies the
update. We trigger the check only on a non-bare repository,
since a bare repo does not have a working tree (and in fact,
pushing to the HEAD branch is a common workflow for
publishing repositories).
The behavior is configurable via receive.denyCurrentBranch,
defaulting to "warn" so as not to break existing setups
(though it may, after a deprecation period, switch to
"refuse" by default). For users who know what they are doing
and want to silence the warning (e.g., because they have a
post-receive hook that reconciles the HEAD and working
tree), they can turn off the warning by setting it to false
or "ignore".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.6.0.4
Update RPM spec for the new location of git-cvsserver.
push: fix local refs update if already up-to-date
do not force write of packed refs
Conflicts:
builtin-revert.c
The new rename subcommand does the followings:
1) Renames the remote.foo configuration section to remote.bar
2) Updates the remote.bar.fetch refspecs
3) Updates the branch.*.remote settings
4) Renames the tracking branches: renames the normal refs and rewrites
the symrefs to point to the new refs.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even long timers seem to have missed that "format-patch -1 $commit" is a
much simpler and more obvious way to say "format-patch $commit^..$commit"
from the current documentation (and an example "format-patch -3 $commit"
to get three patches). Add an explicit instruction in a much earlier part
of the documentation to make it easier to find.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also fix error in diff_filepair::status documentation, and point to
the in-code reference as well as the doc.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Occasionally, it may be useful to prevent branches from getting deleted from
a centralized repository, particularly when no administrative access to the
server is available to undo it via reflog. It also makes
receive.denyNonFastForwards more useful if it is used for access control
since it prevents force-updating by deleting and re-creating a ref.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start 1.6.0.4 cycle
add instructions on how to send patches to the mailing list with Gmail
Documentation/gitattributes: Add subsection header for each attribute
git send-email: avoid leaking directory file descriptors.
send-pack: do not send out single-level refs such as refs/stash
fix overlapping memcpy in normalize_absolute_path
pack-objects: avoid reading uninitalized data
correct cache_entry allocation
Conflicts:
RelNotes
Gmail is one of the most popular email providers in the world. Now that Gmail
supports IMAP, sending properly formatted patches via `git imap-send` is
trivial. This section in SubmittingPatches explains how to do so.
Signed-off-by: Tom Preston-Werner <tom@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes attributes easier to find; before this patch some
attributes had individual subsections, and some didn't.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-svn: change dashed git-commit-tree to git commit-tree
Documentation: clarify information about 'ident' attribute
bash completion: add doubledash to "git show"
Use test-chmtime -v instead of perl in t5000 to get mtime of a file
Add --verbose|-v to test-chmtime
asciidoc: add minor workaround to add an empty line after code blocks
Plug a memleak in builtin-revert
Add file delete/create info when we overflow rename_limit
Install git-cvsserver in $(bindir)
Install git-shell in bindir, too
The documentation spoke of the attribute being set "to" a path; this can
mistakenly be interpreted as "the attribute needs to have its value set to
some kind of path". This clarifies things.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Insert an empty <simpara> in manpages after code blocks to force and
empty line.
The problem can be seen on the manpage for the git tutorial, where an
example command and the following paragraph is printed with no empty
line between them:
First, note that you can get documentation for a command such as git
log --graph with:
$ man git-log
It is a good idea to introduce yourself to git [...]
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch also changes the term "custom diff driver" to
"external diff driver"; now that there are more facets of a
"custom driver" than just external diffing, it makes sense
to refer to the configuration of "diff.foo.*" as the "foo
diff driver", with "diff.foo.command" as the "external
driver for foo".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows hooks like pre-receive to look at the client's IP
address.
Of course the IP address can't be used to get strong security;
git-daemon isn't the right thing to use if you need that. However,
basic IP address checking can be good enough in some situations.
REMOTE_ADDR is the same environment variable used to communicate the
client's address to CGI scripts.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, branches were listed on a single line in each section. But
if there are many branches, then horizontal, line-wrapped lists are very
inconvenient to scan for a human. This makes the lists vertical, i.e one
branch per line is printed.
Since "git remote" is porcelain, we can easily make this
backwards-incompatible change.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-blame outputs text from the commit messages
(e.g. the author name and the summary string) as-is, without
even providing any information about the encoding used for
the data. It makes interpreting the data in multilingual
environment very difficult.
This commit changes the blame implementation to recode the
messages using the rules used by other commands like git-log.
Namely, the target encoding can be specified through the
i18n.commitEncoding or i18n.logOutputEncoding options, or
directly on the command line using the --encoding parameter.
Converting the encoding before output seems to be more
friendly to the porcelain tools than simply providing the
value of the encoding header, and does not require changing
the output format.
If anybody needs the old behavior, it is possible to
achieve it by specifying --encoding=none.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/workflow-doc:
Documentation: add manpage about workflows
Documentation: Refer to git-rebase(1) to warn against rewriting
Documentation: new upstream rebase recovery section in git-rebase
* dp/checkattr:
git-check-attr(1): use 'verse' for multi-line synopsis sections
check-attr: Add --stdin option
check-attr: add an internal check_attr() function
This attempts to make a manpage about workflows that is both handy to
point people at it and as a beginner's introduction.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'--signoff' uses commiter name always to add the signoff line,
make it explicit in the documentation.
Signed-off-by: Abhijit Bhopatkar <bain@devslashzero.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Hopefully the final draft release notes update before 1.6.0.3
diff(1): clarify what "T"ypechange status means
contrib: update packinfo.pl to not use dashed commands
force_object_loose: Fix memory leak
tests: shell negation portability fix
format-patch is most commonly used for multiple patches at once when
sending a patchset, in which case we want to number the patches; on
the other hand, single patches are not usually expected to be
numbered.
In other words, the typical behavior expected from format-patch is the
one obtained by enabling autonumber, so we set it to be the default.
Users that want to disable numbering for a particular patchset can do
so with the existing -N command-line switch. Users that want to
change the default behavior can use the format.numbering config key.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Test-updates-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pb/commit-where:
tutorial: update output of git commit
reformat informational commit message
git commit: Reformat output somewhat
builtin-commit.c: show on which branch a commit was added
If the caller supplies --tags they want the lightweight, unannotated
tags to be searched for a match. If a lightweight tag is closer
in the history, it should be matched, even if an annotated tag is
reachable further back in the commit chain.
The same applies with --all when matching any other type of ref.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-By: Uwe Kleine-König <ukleinek@strlen.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t1301-shared-repo.sh: don't let a default ACL interfere with the test
git-check-attr(1): add output and example sections
xdiff-interface.c: strip newline (and cr) from line before pattern matching
t4018-diff-funcname: demonstrate end of line funcname matching flaw
t4018-diff-funcname: rework negated last expression test
Typo "does not exists" when git remote update remote.
remote.c: correct the check for a leading '/' in a remote name
Add testcase to ensure merging an early part of a branch is done properly
Conflicts:
t/t7600-merge.sh
Plumbing tools should document what output can be expected.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cygwin's POSIX emulation allows use of core.filemode true, unlike native
Window's implementation of stat / lstat, and Cygwin/git users who have
configured core.filemode true in various repositories will be very
unpleasantly surprised to find that git is no longer honoring that option.
So, this patch forces use of Cygwin's stat functions if core.filemode is
set true, regardless of any other considerations.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows multiple paths to be specified on stdin.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The "rebase and edit" howto predates the much easier solution 'git
rebase -i' by two years.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The new -v option forces the progressbar, even in case the output
is not a terminal. This can be useful if the caller is an IDE or
wrapper which wants to scrape the progressbar from stderr and show
its information in a different format.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* mw/sendemail:
bash completion: Add --[no-]validate to "git send-email"
send-email: signedoffcc -> signedoffbycc, but handle both
Docs: send-email: Create logical groupings for man text
Docs: send-email: Create logical groupings for --help text
Docs: send-email: Remove unnecessary config variable description
Docs: send-email: --chain_reply_to -> --[no-]chain-reply-to
send-email: change --no-validate to boolean --[no-]validate
Docs: send-email: Man page option ordering
Docs: send-email usage text much sexier
Docs: send-email's usage text and man page mention same options
* maint:
Do not use errno when pread() returns 0
git init: --bare/--shared overrides system/global config
git-push.txt: Describe --repo option in more detail
git rm: refresh index before up-to-date check
Fix a few typos in relnotes
The --repo option was described in a way that the reader would have to
assume that it is the same as the <repository> parameter. But it actually
servers a purpose, which is now written down.
Furthermore, the --mirror option was missing from the synopsis.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add support for recognition of Objective-C class & instance methods,
C functions, and class implementation/interfaces.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
[ew: fixed a warning to stderr causing t9108 to fail]
Signed-off-by: Florian Ragwitz <rafl@debian.org>
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Update release notes for 1.6.0.3
Teach rebase -i to honor pre-rebase hook
docs: describe pre-rebase hook
do not segfault if make_cache_entry failed
make prefix_path() never return NULL
fix bogus "diff --git" header from "diff --no-index"
Fix fetch/clone --quiet when stdout is connected
builtin-blame: Fix blame -C -C with submodules.
bash: remove fetch, push, pull dashed form leftovers
Conflicts:
diff.c
Documentation/git-rebase.txt talks about pre-rebase hook, but it
appears that Documentation/git-hooks.txt does not have corresponding
entry for it.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Commit c85db254 changed the format of the message produced
by "git commit" when creating a commit. This patch updates
the example session in the tutorial to the new format.
It also adds in the missing diffstat summary lines, which
should have been added long ago.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This function is not used anywhere.
Johannes Sixt <johannes.sixt@telecom.at>:
> Future callers can use run_command_v_opt_cd_env() instead.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Here's a trivial patch that adds "-z" and "--null" options to "git
grep". It was discussed on the mailing-list that git's "-z"
convention should be used instead of GNU grep's "-Z".
So things like 'git grep -l -z "$FOO" | xargs -0 sed -i "s/$FOO/$BOO/"'
do work now.
Signed-off-by: Raphael Zimmerer <killekulla@rdrz.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The documentation now mentions sendemail.signedoffbycc instead
of sendemail.signedoffcc in order to match with the options
--signed-off-by-cc; the code has been updated to reflect this
as well, but sendemail.signedoffcc is still handled.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The options are partitioned into more digestible groups.
Within these groups, the options are sorted alphabetically.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The config variables are mentioned within the descriptions of the
command line options with which they are associated.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There is also now a configuration variable:
sendemail[.<identity>].validate
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now the man page lists the options in alphabetical
order (in terms of the 'main' part of an option's
name).
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Specifically, boolean options are now listed in the form
--[no-]option
and both forms of documentation now consistently use
--[no-]signed-off-by-cc
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The need for "--" in the git-log synopsis was previously unclear and
confusing. This patch makes it a little clearer.
Thanks to hyy <yiyihu@gmail.com> for his help.
[sp: Changed -- to \-- per prior commit e1ccf53.]
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
... because they show up in the man and html outputs.
This escaping is only needed for double dashes to be compatible with
older asciidoc versions; see commit e1ccf53 ([PATCH] Escape asciidoc's
built-in em-dash replacement, 2005-09-12).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
As a result of implementation details, 'git rebase' could
previously only preserve merges in interactive mode. That
limitation was hard for users to understand and awkward to
explain.
This patch works around it by running the interactive rebase
helper git-rebase--interactive with GIT_EDITOR set to ':'
when the user passes "-p" but not "-i" to the rebase command.
The effect is that the interactive rebase helper is used but
the user never sees an editor.
The test-case included in this patch was originally written
by Stephen Habermann <stephen@exigencecorp.com>, but has
been extensively modified since its creation.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Previously, we used to print something along the lines of
Created commit abc9056 on master: Snib the sprock
but that output was sometimes confusing, as many projects use
the "subsystem: message" style of commit subjects (just like
this commit message does). When such improvements are done on
topic-branches, it's not uncommon to name the topic-branch the
same as the subsystem, leading to output like this:
Created commit abc9056 on i386: i386: Snib the sprock
which doesn't look very nice and can be highly confusing.
This patch alters the format so that the noise-word "commit"
is dropped except when it makes the output read better and
the commit subject is put inside parentheses. We also
emphasize the detached case so that users do not overlook it
in case the commit subject is long enough to extend to the
next line. The end result looks thusly:
normal case
Created abc9056 (i386: Snib the sprock) on i386
detached head
Created DETACHED commit abc9056 (i386: Snib the sprock)
While we're at it, we rename "initial commit" to "root-commit"
to align it with the argument to 'git log', producing this:
initial commit
Created root-commit abc9056 (i386: Snib the sprock) on i386
Documentation/gittutorial-2.txt is updated accordingly so that
new users recognize what they're looking at.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
lstat/stat functions in Cygwin are very slow, because they try to emulate
some *nix things that Git does not actually need. This patch adds Win32
specific implementation of these functions for Cygwin.
This implementation handles most situation directly but in some rare cases
it falls back on the implementation provided for Cygwin. This is necessary
for two reasons:
- Cygwin has its own file hierarchy, so absolute paths used in Cygwin is
not suitable to be used Win32 API. cygwin_conv_to_win32_path can not be
used because it automatically dereference Cygwin symbol links, also it
causes extra syscall. Fortunately Git rarely use absolute paths, so we
always use Cygwin implementation for absolute paths.
- Support of symbol links. Cygwin stores symbol links as ordinary using
one of two possible formats. Therefore, the fast implementation falls
back to Cygwin functions if it detects potential use of symbol links.
The speed of this implementation should be the same as mingw_lstat for
common cases, but it is considerable slower when the specified file name
does not exist.
Despite all efforts to make the fast implementation as robust as possible,
it may not work well for some very rare situations. I am aware only one
situation: use Cygwin mount to bind unrelated paths inside repository
together. Therefore, the core.ignoreCygwinFSTricks configuration option is
provided, which controls whether native or Cygwin version of stat is used.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This adds an option "-v" which makes "git prune" more verbose:
It outputs all removed objects while removing them.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
foo.org is an existing domain, use RFC 2606 complying example.com instead
as used in other docs as well.
Signed-off-by: Michael Prokop <mika@grml.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* bc/master-diff-hunk-header-fix:
Clarify commit error message for unmerged files
Use strchrnul() instead of strchr() plus manual workaround
Use remove_path from dir.c instead of own implementation
Add remove_path: a function to remove as much as possible of a path
git-submodule: Fix "Unable to checkout" for the initial 'update'
Clarify how the user can satisfy stash's 'dirty state' check.
t4018-diff-funcname: test syntax of builtin xfuncname patterns
t4018-diff-funcname: test syntax of builtin xfuncname patterns
make "git remote" report multiple URLs
diff hunk pattern: fix misconverted "\{" tex macro introducers
diff: fix "multiple regexp" semantics to find hunk header comment
diff: use extended regexp to find hunk headers
diff: use extended regexp to find hunk headers
diff.*.xfuncname which uses "extended" regex's for hunk header selection
diff.c: associate a flag with each pattern and use it for compiling regex
diff.c: return pattern entry pointer rather than just the hunk header pattern
Conflicts:
builtin-merge-recursive.c
t/t7201-co.sh
xdiff-interface.h
* maint: (41 commits)
Clarify commit error message for unmerged files
Use strchrnul() instead of strchr() plus manual workaround
Use remove_path from dir.c instead of own implementation
Add remove_path: a function to remove as much as possible of a path
git-submodule: Fix "Unable to checkout" for the initial 'update'
Clarify how the user can satisfy stash's 'dirty state' check.
Remove empty directories in recursive merge
Documentation: clarify the details of overriding LESS via core.pager
Update release notes for 1.6.0.3
checkout: Do not show local changes when in quiet mode
for-each-ref: Fix --format=%(subject) for log message without newlines
git-stash.sh: don't default to refs/stash if invalid ref supplied
maint: check return of split_cmdline to avoid bad config strings
builtin-prune.c: prune temporary packs in <object_dir>/pack directory
Do not perform cross-directory renames when creating packs
Use dashless git commands in setgitperms.perl
git-remote: do not use user input in a printf format string
make "git remote" report multiple URLs
Start draft release notes for 1.6.0.3
git-repack uses --no-repack-object, not --no-repack-delta.
...
Conflicts:
RelNotes
* bc/maint-diff-hunk-header-fix:
t4018-diff-funcname: test syntax of builtin xfuncname patterns
diff hunk pattern: fix misconverted "\{" tex macro introducers
diff: use extended regexp to find hunk headers
diff.*.xfuncname which uses "extended" regex's for hunk header selection
diff.c: associate a flag with each pattern and use it for compiling regex
diff.c: return pattern entry pointer rather than just the hunk header pattern
Conflicts:
Documentation/gitattributes.txt
* jc/better-conflict-resolution:
Fix AsciiDoc errors in merge documentation
git-merge documentation: describe how conflict is presented
checkout --conflict=<style>: recreate merge in a non-default style
checkout -m: recreate merge when checking out of unmerged index
git-merge-recursive: learn to honor merge.conflictstyle
merge.conflictstyle: choose between "merge" and "diff3 -m" styles
rerere: understand "diff3 -m" style conflicts with the original
rerere.c: use symbolic constants to keep track of parsing states
xmerge.c: "diff3 -m" style clips merge reduction level to EAGER or less
xmerge.c: minimum readability fixups
xdiff-merge: optionally show conflicts in "diff3 -m" style
xdl_fill_merge_buffer(): separate out a too deeply nested function
checkout --ours/--theirs: allow checking out one side of a conflicting merge
checkout -f: allow ignoring unmerged paths when checking out of the index
Conflicts:
Documentation/git-checkout.txt
builtin-checkout.c
builtin-merge-recursive.c
t/t7201-co.sh
* maint:
Remove empty directories in recursive merge
Documentation: clarify the details of overriding LESS via core.pager
Conflicts:
builtin-merge-recursive.c
The process of overriding the default LESS options using only
git-specific methods is rather obscure. Show the end user how
to do it in a step-by-step manner.
Signed-off-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Update release notes for 1.6.0.3
checkout: Do not show local changes when in quiet mode
for-each-ref: Fix --format=%(subject) for log message without newlines
git-stash.sh: don't default to refs/stash if invalid ref supplied
maint: check return of split_cmdline to avoid bad config strings
In the future, I think we should also default to xdg-open on Linux instead
of having a KDE-specific hack.
This patch has been sponsored by Novartis.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Generally, the dependent clause "for example" is suffixed with a comma.
Used present tense where appropriate to be consistent with the other
paragraphs.
Rewrote the paragraph in the second hunk to be more clear.
Signed-off-by: Garry Dolley <gdolley@ucla.edu>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This concept was retired by 77882f6 (Retire diffcore-pathspec.,
2006-04-10), more than 2 years ago.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-diff-hunk-header-fix:
diff.*.xfuncname which uses "extended" regex's for hunk header selection
diff.c: associate a flag with each pattern and use it for compiling regex
diff.c: return pattern entry pointer rather than just the hunk header pattern
Cosmetical command name fix
Start conforming code to "git subcmd" style part 3
t9700/test.pl: remove File::Temp requirement
t9700/test.pl: avoid bareword 'STDERR' in 3-argument open()
GIT 1.6.0.2
Fix some manual typos.
Use compatibility regex library also on FreeBSD
Use compatibility regex library also on AIX
Update draft release notes for 1.6.0.2
Use compatibility regex library for OSX/Darwin
git-svn: Fixes my() parameter list syntax error in pre-5.8 Perl
Git.pm: Use File::Temp->tempfile instead of ->new
t7501: always use test_cmp instead of diff
Start conforming code to "git subcmd" style part 2
diff: Help "less" hide ^M from the output
checkout: do not check out unmerged higher stages randomly
Conflicts:
Documentation/git.txt
Documentation/gitattributes.txt
Makefile
diff.c
t/t7201-co.sh
* maint:
sha1_file: link() returns -1 on failure, not errno
Make git archive respect core.autocrlf when creating zip format archives
Add new test to demonstrate git archive core.autocrlf inconsistency
gitweb: avoid warnings for commits without body
Clarified gitattributes documentation regarding custom hunk header.
git-svn: fix handling of even funkier branch names
git-svn: Always create a new RA when calling do_switch for svn://
git-svn: factor out svnserve test code for later use
diff/diff-files: do not use --cc too aggressively
* rs/decorate:
add '%d' pretty format specifier to show decoration
move load_ref_decorations() to log-tree.c and export it
log: add load_ref_decorations()
Currently, the hunk headers produced by 'diff -p' are customizable by
setting the diff.*.funcname option in the config file. The 'funcname' option
takes a basic regular expression. This functionality was designed using the
GNU regex library which, by default, allows using backslashed versions of
some extended regular expression operators, even in Basic Regular Expression
mode. For example, the following characters, when backslashed, are
interpreted according to the extended regular expression rules: ?, +, and |.
As such, the builtin funcname patterns were created using some extended
regular expression operators.
Other platforms which adhere more strictly to the POSIX spec do not
interpret the backslashed extended RE operators in Basic Regular Expression
mode. This causes the pattern matching for the builtin funcname patterns to
fail on those platforms.
Introduce a new option 'xfuncname' which uses extended regular expressions,
and advertise it _instead_ of funcname. Since most users are on GNU
platforms, the majority of funcname patterns are created and tested there.
Advertising only xfuncname should help to avoid the creation of non-portable
patterns which work with GNU regex but not elsewhere.
Additionally, the extended regular expressions may be less ugly and
complicated compared to the basic RE since many common special operators do
not need to be backslashed.
For example, the GNU Basic RE:
^[ ]*\\(\\(public\\|static\\).*\\)$
becomes the following Extended RE:
^[ ]*((public|static).*)$
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only part of the hunk header that we can change is the "TEXT"
portion. Additionally, a few grammatical errors have been corrected.
Signed-off-by: Garry Dolley <gdolley@ucla.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This points readers at the "Recovering from upstream rebase" warning
in git-rebase(1) when we talk about rewriting published history in the
'reset', 'commit --amend', and 'filter-branch' documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document how to recover if the upstream that you pull from has
rebased the branches you depend your work on. Hopefully this can also
serve as a warning to potential rebasers.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a make target "quick-install-html" which installs
the html documentation from the branch origin/html, without the need for
asciidoc/xmlto. This is analogous to the existing "quick-install-doc"
target for the man pages.
We advertise these targets in the INSTALL file now.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes for 1.6.0.2
Use compatibility regex library for OSX/Darwin
git-svn: Fixes my() parameter list syntax error in pre-5.8 Perl
Git.pm: Use File::Temp->tempfile instead of ->new
t7501: always use test_cmp instead of diff
Conflicts:
Makefile
The logic to checkout a different commit implements the safety to never
lose user's local changes. For example, switching from a commit to
another commit, when you have changed a path that is different between
them, need to merge your changes to the version from the switched-to
commit, which you may not necessarily be able to resolve easily. By
default, "git checkout" refused to switch branches, to give you a chance
to stash your local changes (or use "-m" to merge, accepting the risks of
getting conflicts).
This safety, however, had one deliberate hole since early June 2005. When
your local change was to remove a path (and optionally to stage that
removal), the command checked out the path from the switched-to commit
nevertheless.
This was to allow an initial checkout to happen smoothly (e.g. an initial
checkout is done by starting with an empty index and switching from the
commit at the HEAD to the same commit). We can tighten the rule slightly
to allow this special case to pass, without losing sight of removal
explicitly done by the user, by noticing if the index is truly empty when
the operation begins.
For historical background, see:
http://thread.gmane.org/gmane.comp.version-control.git/4641/focus=4646
This case is marked as *0* in the message, which both Linus and I said "it
feels somewhat wrong but otherwise we cannot start from an empty index".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise it will always print the class-name rather
than the name of the function inside that class.
While we're at it, reorder the gitattributes manpage to
list the built-in funcname pattern names in alphabetical
order.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows --include=pathspec, similar to --exclude=pathspec.
The rule when one or both of these are used is that the include/exclude
patterns are examined in the order they are given on the command line, and
the first match determines if a patch to each path is used or not. Hence:
$ git apply --include='specific.h' --exclude='*.h' <diff
would apply the patch to specific.h header file, but all other patches in
the input file to other header files are ignored. A patch to a path that
does not match any include/exclude pattern is used by default if there is
no include pattern on the command line, and ignored if there is any
include pattern.
This originally came from Joe Perches, but both the design of the
semantics and the implementation have been redone complately.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes for 1.6.0.2
stash: refresh the index before deciding if the work tree is dirty
Mention the fact that 'git annotate' is only for backward compatibility.
"blame -c" should be compatible with "annotate"
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
Tries to shorten the refname to a non-ambiguous name.
Szeder Gábor noticed that the git bash completion takes a
tremendous amount of time to strip leading components from
heads and tags refs (i.e. refs/heads, refs/tags, ...). He
proposed a new atom called 'refbasename' which removes at
most two leading components from the ref name.
I myself, proposed a more dynamic solution, which strips off
common leading components with the matched pattern.
But the current bash solution and both proposals suffer from
one mayor problem: ambiguous refs.
A ref is ambiguous, if it resolves to more than one full refs.
I.e. given the refs refs/heads/xyzzy and refs/tags/xyzzy. The
(short) ref xyzzy can point to both refs.
( Note: Its irrelevant whether the referenced objects are the
same or not. )
This proposal solves this by checking for ambiguity of the
shorten ref name.
The shortening is done with the same rules for resolving refs
but in the reverse order. The short name is checked if it
resolves to a different ref.
To continue the above example, the output would be like this:
heads/xyzzy
xyzzy
So, if you want just tags, xyzzy is not ambiguous, because it
will resolve to a tag. If you need the heads you get a also
a non-ambiguous short form of the ref.
To integrate this new format into the bash completion to get
only non-ambiguous refs is beyond the scope of this patch.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option --dirstat-by-file is the same as --dirstat, but it
counts "impacted files" instead of "impacted lines" (lines that are
added or removed).
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When somebody is reading git-blame.txt (or git-annotate.txt) for the first
time, the message we would like to send is:
(1) Here is why you would want to use this command, what it can do
(perhaps more than what you would have expected from "$scm blame"),
and how you tell it to do what it does.
This is obvious.
(2) You might have heard of the command with the other name. There is no
difference between the two, except they differ in their default
output formats.
This is essential to answer: "git has both? how are they different?"
(3) We tend to encourage blame over annotate for new scripts and new
people, but there is no reason to choose one over the other.
This is not as important as (2), but would be useful to avoid
repeated questions about "when will we start deprecating this?"
As long as we describe (2) on git-annotate page clearly enough, people who
read git-blame page first and get curious can refer to git-annotate page.
While at it, subtly hint (3) without being overly explicit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new format placeholder, %d, which expands to a ref name decoration
(think git log --decorate). It expands to an empty string if the commit
has no decoration, or otherwise to a comma (and space) separated list of
decorations, surrounded by parentheses and a leading space.
Michael Dressel implemented an initial version and chose the letter d,
Junio suggested to add a leading space and parentheses.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the section on conflict markers, the "<<<<<<<" sequence is compiled by
AsciiDoc into invalid XML. A way to resolve this is by inserting something
between the last two characters in that sequence (i.e. between '<' and '"').
This patch encloses the conflict markers in backticks, which renders them
in a monospace font (in the HTML version; the manual page is unaffected),
and with the pleasant side-effect that it also fixes the AsciiDoc compile
problem.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/filter-branch:
revision --simplify-merges: make it a no-op without pathspec
revision --simplify-merges: do not leave commits unprocessed
revision --simplify-merges: use decoration instead of commit->util field
Documentation: rev-list-options: move --simplify-merges documentation
filter-branch: use --simplify-merges
filter-branch: fix ref rewriting with --subdirectory-filter
filter-branch: Extend test to show rewriting bug
Topo-sort before --simplify-merges
revision traversal: show full history with merge simplification
revision.c: whitespace fix
* maint:
Makefile: add merge_recursive.h to LIB_H
Improve documentation for --dirstat diff option
Bring local clone's origin URL in line with that of a remote clone
Documentation: minor cleanup in a use case in 'git stash' manual
Documentation: fix disappeared lines in 'git stash' manpage
Documentation: fix reference to a for-each-ref option
There is no need to explicitly pass the file to be committed to 'git
commit', because it's contents is already in the index.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc removes lines starting with a dot when creating manpages.
Since those lines were comments in use case examples showing shell
commands, preceed those lines with a hash sign.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We took it granted that everybody knows how to read the RCS merge style
conflicts, and did not give illustrations in the documentation. Now we
are introducing an alternative output style, it is time to document this.
The lack of illustration has been bugging me for a long time.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option does essentially the same thing as -m option when checking
unmerged paths out of the index, but it uses the specified style instead
of configured merge.conflictstyle.
Setting "merge.conflictstyle" to "diff3" is usually less useful than using
the default "merge" style, because the latter allows a conflict that
results by both sides changing the same region in a very similar way to
get simplified substancially by reducing the common lines. However, when
one side removed a group of lines (perhaps a function was moved to some
other file) while the other side modified it, the default "merge" style
does not give any clue as to why the hunk is left conflicting. You would
need the original to understand what is going on.
The recommended use would be not to set merge.conflictstyle variable so
that you would usually use the default "merge" style conflict, and when
the result in a path in a particular merge is too hard to understand, use
"git checkout --conflict=diff3 $path" to check it out with the original to
review what is going on.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS section of gitattibutes and gitmodule fail to clearly
specify the name of the in tree files used. This patch brings in the
initial `.' and the fact that the `.gitmodules' file should reside at
the top-level of the working tree.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is off(0) by default, to avoid scaring people unless they asked to.
If set to a non-0 value, wait for that amount of deciseconds before
running the corrected command.
Suggested by Junio, so he has a chance to hit Ctrl-C.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitcvs.usecrlfattr --> gitcvs.usecrlfattr::
This fixes an asciidoc markup issue.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows "git commit --author=$name" to accept a name that is not in
the required "A U Thor <author@example.xz>" format, and use that to look
up an author name that matches from existing commits.
When using this feature, it is the user's responsibility to give a name
that uniquely matches the name s/he wants, as the logic returns the name
from the first matching commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With a new configuration "diff.mnemonicprefix", "git diff" shows the
differences between various combinations of preimage and postimage trees
with prefixes different from the standard "a/" and "b/". Hopefully this
will make the distinction stand out for some people.
"git diff" compares the (i)ndex and the (w)ork tree;
"git diff HEAD" compares a (c)ommit and the (w)ork tree;
"git diff --cached" compares a (c)ommit and the (i)ndex;
"git-diff HEAD:file1 file2" compares an (o)bject and a (w)ork tree entity;
"git diff --no-index a b" compares two non-git things (1) and (2).
Because these mnemonics now have meanings, they are swapped when reverse
diff is in effect and this feature is enabled.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitattributes: -crlf is not binary
git-apply: Loosen "match_beginning" logic
Fix example in git-name-rev documentation
shell: do not play duplicated definition games to shrink the executable
Fix use of hardlinks in "make install"
pack-objects: Allow missing base objects when creating thin packs
The description of crlf attribute incorrectly said that "-crlf" means
binary. It is true that for binary files you would want "-crlf", but
that is not the same thing.
We also have supported attribute macros and via that mechanism a handy
"binary" to specify "-crlf -diff" at the same time. It was not documented
anywhere as far as I can tell, even though the support was there from
the very beginning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches git-checkout to recreate a merge out of unmerged
index entries while resolving conflicts.
With this patch, checking out an unmerged path from the index
now have the following possibilities:
* Without any option, an attempt to checkout an unmerged path
will atomically fail (i.e. no other cleanly-merged paths are
checked out either);
* With "-f", other cleanly-merged paths are checked out, and
unmerged paths are ignored;
* With "--ours" or "--theirs, the contents from the specified
stage is checked out;
* With "-m" (we should add "--merge" as synonym), the 3-way merge
is recreated from the staged object names and checked out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-checkout-fix:
checkout --ours/--theirs: allow checking out one side of a conflicting merge
checkout -f: allow ignoring unmerged paths when checking out of the index
checkout: do not check out unmerged higher stages randomly
This teaches "git merge-file" to honor merge.conflictstyle configuration
variable, whose value can be "merge" (default) or "diff3".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets you to check out 'our' (or 'their') version of an
unmerged path out of the index while resolving conflicts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we made "git checkout $pathspec" to atomically refuse
the operation of $pathspec matched any path with unmerged
stages. This patch allows:
$ git checkout -f a b c
to ignore, instead of error out on, such unmerged paths. The
fix to prevent checkout of an unmerged path from random stages
is still there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 59d3f54 (name-rev: avoid "^0" when unneeded, 2007-02-20), name-rev
stopped showing an unnecessary "^0" to dereference a tag down to a commit.
The patch should have made a matching update to the documentation, but we
forgot.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some situations it is useful to be able to switch viewers via the
environment, e.g. in Emacs shell buffers. So check the GIT_MAN_VIEWER
environment variable and try it before falling back to "man".
Signed-off-by: Romain Francoise <romain@orebokech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tutorial: gentler illustration of Alice/Bob workflow using gitk
pretty=format: respect date format options
make git-shell paranoid about closed stdin/stdout/stderr
Document gitk --argscmd flag.
Fix '--dirstat' with cross-directory renaming
for-each-ref: Allow a trailing slash in the patterns
Update to gitutorial as discussedin the git mailing list:
http://marc.info/?t=121969390900002&r=1&w=2
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a command like:
git log --pretty=format:%ad --date=short
the date option was ignored. This patch causes it to use whatever
format was specified by --date (or by --relative-date, etc), just
as the non-user formats would do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was part of my original patch, but appears to have been lost.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule's URL changes upstream, existing submodules
will be out of sync since their remote."$origin".url will still
be set to the old value.
This adds a "git submodule sync" command that reads submodules'
URLs from .gitmodules and updates them accordingly.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unwary user may not know how to disable the -FRSX options.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was not obvious from the text that pager.<cmd> is a boolean
setting.
While we're changing the description, make some other
improvements: lest we forget and fret, clarify that -p and
pager.<cmd> do not kick in when stdout is not a tty; point to
related core.pager and GIT_PAGER settings; use renamed --paginate
option.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code handles additionally "refs/remotes/<something>/name",
"remotes/<something>/name", and "refs/<namespace>/name".
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Find lines with <h1>..<h6> tags.
[jc: while at it, reordered entries to sort alphabetically.]
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kh/diff-tree:
Add test for diff-tree --stdin with two trees
Teach git diff-tree --stdin to diff trees
diff-tree: Note that the commit ID is printed with --stdin
Refactoring: Split up diff_tree_stdin
* cc/merge-base-many:
git-merge-octopus: use (merge-base A (merge B C D E...)) for stepwise merge
merge-base-many: add trivial tests based on the documentation
documentation: merge-base: explain "git merge-base" with more than 2 args
merge-base: teach "git merge-base" to drive underlying merge_bases_many()
* maint:
Update draft release notes for 1.6.0.1
Add hints to revert documentation about other ways to undo changes
Install templates with the user and group of the installing personality
"git-merge": allow fast-forwarding in a stat-dirty tree
completion: find out supported merge strategies correctly
decorate: allow const objects to be decorated
for-each-ref: cope with tags with incomplete lines
diff --check: do not get confused by new blank lines in the middle
remote.c: remove useless if-before-free test
mailinfo: avoid violating strbuf assertion
git format-patch: avoid underrun when format.headers is empty or all NLs
Based on its name, people may read the 'git revert' documentation when
they want to undo local changes, especially people who have used other
SCM's. 'git revert' may not be what they had in mind, but git
provides several other ways to undo changes to files. We can help
them by pointing them towards the git commands that do what they might
want to do.
Cc: Daniel Barkalow <barkalow@iabervon.org>
Cc: Lea Wiemann <lewiemann@gmail.com>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dp/hash-literally:
add --no-filters option to git hash-object
add --path option to git hash-object
use parse_options() in git hash-object
correct usage help string for git-hash-object
correct argument checking test for git hash-object
teach index_fd to work with pipes
* rs/imap:
Documentation: Improve documentation for git-imap-send(1)
imap-send.c: more style fixes
imap-send.c: style fixes
git-imap-send: Support SSL
git-imap-send: Allow the program to be run from subdirectories of a git tree
GNU diff's --suppress-blank-empty option makes it so that diff no
longer outputs trailing white space unless the input data has it.
With this option, empty context lines are now empty also in diff -u output.
Before, they would have a single trailing space.
* diff.c (diff_suppress_blank_empty): New global.
(git_diff_basic_config): Set it.
(fn_out_consume): Honor it.
* t/t4029-diff-trailing-space.sh: New file.
* Documentation/config.txt: Document it.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of the fixed array of children and make max-connections
dynamic and configurable.
Fix the killing code to actually kill the newest connections from
duplicate IP-addresses.
Avoid forking if too busy already.
Signed-off-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule foreach <command-list> will execute the list of commands in
each currently checked out submodule directory. The list of commands
is arbitrary as long as it is acceptable to sh. The variables '$path'
and '$sha1' are availble to the command-list, defining the submodule
path relative to the superproject and the submodules's commitID as
recorded in the superproject (this may be different than HEAD in the
submodule).
This utility is inspired by a number of threads on the mailing list
looking for ways to better integrate submodules in a tree and work
with them as a unit. This could include fetching a new branch in each
from a given source, or possibly checking out a given named branch in
each. Currently, there is no consensus as to what additional commands
should be implemented in the porcelain, requiring all users whose needs
exceed that of git-submodule to do their own scripting. The foreach
command is intended to support such scripting, and in particular does
no error checking and produces no output, thus allowing end users
complete control over any information printed out and over what
constitutes an error. The processing does terminate if the command-list
returns an error, but processing can easily be forced for all
submodules be terminating the list with ';true'.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds the total pack size (including indexes) the verbose count-objects
output, floored to the nearest kilobyte.
Updates documentation to match this addition.
Signed-off-by: Marcus Griep <marcus@griep.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was already documented in RelNotes-1.6.0, but not in the git-config
manual page.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash -h" showed some incomplete and ugly usage information.
For example, the useful "--keep-index" option for "save" or the "--index"
option for "apply" were not shown. Also in the documentation synopsis they
were not shown, so that there is no incentive to scroll down and even see
that such options exist.
This patch improves the git-stash synopsis in the documentation by
mentioning that further options to the stash commands and then copies
this synopsis to the usage information string of git-stash.sh.
For the latter, the dashless git command string has to be inserted on the
second and the following usage lines. The code of this is taken from
git-sh-setup so that all lines will show the command string.
Note that the "create" command is not advertised at all now, because
it was not mentioned in git-stash.txt.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-apply documentation says that --binary is a historical option.
This patch lets git-am ignore --binary and removes advertisements of this
option.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 8c02eee (git-rev-list(1): group options; reformat; document more
options, 2006-09-01), git-rev-list documentation talks as if it supports
any kind of diff output. It doesn't.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fits --simplify-merges documentation into the 'History Simplification'
section, including example.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/post-simplify:
Topo-sort before --simplify-merges
revision traversal: show full history with merge simplification
revision.c: whitespace fix
Conflicts:
Documentation/rev-list-options.txt
This completely rewrites the documentation of --full-history with lots
of examples.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All BibTeX entries starts with an @ followed by an entry type. Since
there are many entry types and own can be defined, the pattern matches
legal entry type names instead of just the default types (which would
be a long list). The pattern also matches strings and comments since
they will also be useful to position oneself in a bib-file.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the hunk header pattern text was written patterns for Ruby and
Pascal/Delphi have been added. For users to be able to find them they
should be documented not only in code.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The post-update hook, which is required to be enabled in order for
the repository to be accessible over HTTP, is not enabled by
chmod a+x anymore, but instead by dropping the .sample suffix.
This patch emphasizes this change in the release notes (since
I believe this is rather noticeable backwards-incompatible change).
It also adjusts the documentation which still described the old way
and fixes t/t5540-http-push.sh, which was broken for 1.5 month
but apparently noone ever runs this test.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
What does the user most likely want with this command?
$ git checkout --track origin/next
Exactly. A branch called 'next', that tracks origin's branch 'next'.
Make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
18a2197 (Documentation: rev-list-options: Fix -g paragraph formatting,
2008-08-10) introduced the third paragraph that is continued, but it seems
to confuse docbook toolchain on FC9 machines.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When feeding trees on the command line, you can give exactly two
trees, not three nor one; --stdin now supports this "two tree" form on
its input, in addition to accepting lines with one or more commits.
When diffing trees (either specified on the command line or from the
standard input), the -s, -v, --pretty, --abbrev-commit, --encoding,
--no-commit-id, and --always options are ignored, since they do not
apply to trees; and the -m, -c, and --cc options are ignored since
they would be meaningful only with three or more trees, which is not
supported (yet).
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's sort of already documented with the --no-commit-id command-line
flag, but let's not hide important information from the user.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation: fix invalid reference to 'mybranch' in user manual
Fix deleting reflog entries from HEAD reflog
reflog test: add more tests for 'reflog delete'
Documentation: rev-list-options: Fix -g paragraph formatting
Conflicts:
Documentation/user-manual.txt
- Add an escape to @{now}. Without the escape, the brace does
something magic and eats half the sentence up to the closing brace
at 'timestamp}'.
- Join the last paragraph with a '+'.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a --force flag to git-rm, making it somewhat easier for
subversion people to switch.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the '--' option that can be used to pass rev-list options
(not just arguments), and give an example usage of '-- --all'. Remove
reference to "the new branch name"; filter-branch takes arbitrary
arguments to rev-list since dfd05e3.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit -a" ignores untracked files and follows all tracked
files, regardless of whether they are listed in .gitignore. So
don't use it to motivate gitignore.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows one to use public svn:// URLs for fetch and
svn+ssh:// URLs for committing (without using the complicated
rewriteRoot option, reimporting or git-filter-branch).
Using this can also help avoid unnecessary server
authentication/encryption overhead on busy SVN servers.
Along with the new --revision option, this can also be allowed
to override the branch detection in dcommit, too. This is
potentially dangerous and not recommended! (And also purposely
undocumented, but the loaded gun is there in case somebody
wants to make it safe).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ef98c5ca lifted the 16 parents restriction in builtin-commit-tree.c,
but forgot to update the documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I see quite a few pages on k.org site, e.g.
http://www.kernel.org/pub/software/scm/git/docs/git-rerere.html
(scroll down to find "After this test merge")
are misformatted to lose teletype text '+' that is followed by a comma,
and turns the following paragraph all typeset in teletype.
This patch seems to fix the issue at the site (meaning, with the
particular vintage of asciidoc and docbook toolchain), without breaking
things with the version I have at my primary development machine, but
wider testing is very much appreciated.
After this patch,
git grep '`+`,' -- Documentation
should report noting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lt/config-fsync:
Add config option to enable 'fsync()' of object files
Split up default "i18n" and "branch" config parsing into helper routines
Split up default "user" config parsing into helper routine
Split up default "core" config parsing into helper routine
Long time ago, the feature of "diff-tree --stdin" to take a commit and its
parents on one line was broken, and did not support the common:
git rev-list --parents $commits... -- $paths... |
git diff-tree --stdin -v -p
usage pattern by Porcelains properly. For diff-tree to talk sensibly
about commits, it needs to see commits, not just trees; the code was fixed
to take list of commits on the standard input in 1.2.0.
However we left the documentation stale for a long time, until Karl
Hasselström finally noticed it very recently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option allows the contents to be hashed as is, ignoring any input
filter that would have been chosen by the attributes mechanism.
This option is incompatible with --path and --stdin-paths options.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --path option allows us to pretend as if the contents being hashed
came from the specified path, and affects which input filter is used via
the attributes mechanism. This is useful for hashing a temporary file
whose name is different from the path that is meant to have the hashed
contents.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usage string is corrected to make it fit in 80 columns and to make it
unequivocal about what options can be used with --stdin-paths.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line
$ git clone --mirror $URL
is now a short-hand for
$ git clone --bare $URL
$ (cd $(basename $URL) && git remote add --mirror origin $URL)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-name-rev: allow --name-only in combination with --stdin
builtin-name-rev.c: split deeply nested part from the main function
Conflicts:
Documentation/git-name-rev.txt
The --full-history traversal keeps all merges in addition to non-merge
commits that touch paths in the given pathspec. This is useful to view
both sides of a merge in a topology like this:
A---M---o
/ /
---O---B
even when A and B makes identical change to the given paths. The revision
traversal without --full-history aims to come up with the simplest history
to explain the final state of the tree, and one of the side branches can
be pruned away.
The behaviour to keep all merges however is inconvenient if neither A nor
B touches the paths we are interested in. --full-history reduces the
topology to:
---O---M---o
in such a case, without removing M.
This adds a post processing phase on top of --full-history traversal to
remove needless merges from the resulting history.
The idea is to compute, for each commit in the "full history" result set,
the commit that should replace it in the simplified history. The commit
to replace it in the final history is determined as follows:
* In any case, we first figure out the replacement commits of parents of
the commit we are looking at. The commit we are looking at is
rewritten as if the replacement commits of its original parents are its
parents. While doing so, we reduce the redundant parents from the
rewritten parent list by not just removing the identical ones, but also
removing a parent that is an ancestor of another parent.
* After the above parent simplification, if the commit is a root commit,
an UNINTERESTING commit, a merge commit, or modifies the paths we are
interested in, then the replacement commit of the commit is itself. In
other words, such a commit is not dropped from the final result.
The first point above essentially means that the history is rewritten in
the bottom up direction. We can rewrite the parent list of a commit only
after we know how all of its parents are rewritten. This means that the
processing needs to happen on the full history (i.e. after limit_list()).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-add -i ranges expect number-number. But for the supremely lazy, typing in
that second number when selecting "from patch 7 to the end" is wasted effort.
So treat an empty second number in a range as "until the last item".
Signed-off-by: Ciaran McCreesh <ciaran.mccreesh@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff.external examples pass a flag to gnu-diff, but GNU diff
does not follow the GIT_EXTERNAL_DIFF interface.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION
also mentions "<path>..." and says the specified "paths" (note plural)
are used for $whatever. This fixes the obvious mismatches.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since version 1.5.6 "git bisect" doesn't use a "bisect" branch any
more, but the user manual had not been updated to reflect this.
So this patch does that and while at it also adds a few words about
"git bisect skip" and points user to the "git bisect" man page for
more information.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although it does not matter for Git itself, tools that
export to systems that explicitly track copies and
renames can benefit from such information.
This patch makes fast-export output correct action
logs when -M or -C are enabled.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svnimport is no longer supported, so don't mention it in the
documentation. This also updates the description, removing the
historical discussion, since it mostly dealt with how it differed from
svnimport. The new description gives some starting points into the
rest of the documentation.
Noticed by Jurko Gospodnetić <jurko.gospodnetic@docte.hr>
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new configuration variable 'core.trustctime' is introduced to
allow ignoring st_ctime information when checking if paths
in the working tree has changed, because there are situations where
it produces too much false positives. Like when file system crawlers
keep changing it when scanning and using the ctime for marking scanned
files.
The default is to notice ctime changes.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When run in a working copy subdirectory, git-ls-tree will automagically
add the prefix to the pathspec, which can result in an unexpected behavior
when the tree object accessed is not the root tree object.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The diff.external examples pass a flag to gnu-diff, but GNU diff
does not follow the GIT_EXTERNAL_DIFF interface.
Signed-off-by: Anders Melchiorsen <mail@cup.kalibalik.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the description to be similar to that used for git-send-email(1) to
give a better description of what the tool can be used for and sound more
user-friendly.
Document the configuration variables used by git-imap-send, split the
example into tunnel and direct examples. Rephrase other parts of the
git-imap-send documentation to use better grammar and to be clearer.
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow SSL to be used when a imaps:// URL is used for the host name.
Also, automatically use TLS when not using imaps:// by using the IMAP
STARTTLS command, if the server supports it.
Tested with Courier and Gimap IMAP servers.
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone" no longer calls "git-fetch-pack", so the documentation is a bit
stale. Instead, state that the -u option is to be used when accessing a
repository over ssh.
Signed-off-by: Steve Haslam <shaslam@lastminute.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After looking the git-tag manpage, someone on #git wondered how
to tag a commit that is not a branch head. This patch changes
the synopsis to say "<commit> | <object>" instead of "<head>" to
address his question.
Samuel Bronson had the idea of putting "<commit> | <object>"
for "<object>" because most tags point to commits (and for the
rest of the manpage, all tags point to commits).
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git checkout' uses '--' to separate options from paths, but it was not
mentioned in the documentation
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The example to remove paths using index-filter was done with
"git update-index --remove"; "git rm --cached" would be more familiar to
new people and is sufficient for this particular case.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-rerere documentation talks about commands that invoke
"git rerere clear" automatically. git am --abort is added and
a typo is fixed additionally.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the documentation, where you cannot get compile errors for using the
wrong member name, there were two mentions of 'path' left.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name path_list was correct for the first usage of that data structure,
but it really is a general-purpose string list.
$ perl -i -pe 's/path-list/string-list/g' $(git grep -l path-list)
$ perl -i -pe 's/path_list/string_list/g' $(git grep -l path_list)
$ git mv path-list.h string-list.h
$ git mv path-list.c string-list.c
$ perl -i -pe 's/has_path/has_string/g' $(git grep -l has_path)
$ perl -i -pe 's/path/string/g' string-list.[ch]
$ git mv Documentation/technical/api-path-list.txt \
Documentation/technical/api-string-list.txt
$ perl -i -pe 's/strdup_paths/strdup_strings/g' $(git grep -l strdup_paths)
... and then fix all users of string-list to access the member "string"
instead of "path".
Documentation/technical/api-string-list.txt needed some rewrapping, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-am, it sounds awkward to have the patches in ".git/rebase/",
but for technical reasons, we have to keep the same directory name
for git-am and git-rebase. ".git/rebase-apply" seems to be a good
compromise.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After failing to apply patches in the middle of a series, "git am --abort"
lets you go back to the original commit.
[jc: doc/help update from Olivier, and fixups for "am -3" squashed in]
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.5.6.4
builtin-rm: fix index lock file path
http-fetch: do not SEGV after fetching a bad pack idx file
rev-list: honor --quiet option
api-run-command.txt: typofix
Currently fast-import/export cannot be used for
repositories with submodules. This patch extends
the relevant programs to make them correctly
process gitlinks.
Links can be represented by two forms of the
Modify command:
M 160000 SHA1 some/path
which sets the link target explicitly, or
M 160000 :mark some/path
where the mark refers to a commit. The latter
form can be used by importing tools to build
all submodules simultaneously in one physical
repository, and then simply fetch them apart.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-merge documentation's "HOW MERGE WORKS" section is confusingly
composed and actually omits the most interesting part, the merging of
the arguments into HEAD itself, surprisingly not actually mentioning
the fast-forward merge anywhere.
This patch replaces the "[NOTE]" screenful of highly technical details
by a single sentence summing up the interesting information, and instead
explains how are the arguments compared with HEAD and the three possible
inclusion states that are named "Already up-to-date", "Fast-forward"
and "True merge". It also makes it clear that the rest of the section
talks only about the true merge situation, and slightly expands the
talk on solving conflicts.
Junio initiated the removal of the Note screenful altogether and
offered many stylistical fixes.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch explains more carefully that `.gitignore` concerns only
untracked files and refers the reader to
git update-index --assume-unchanged
in the need of ignoring uncommitted changes in already tracked files.
The description of this option is lifted to a more "porcelainish"
level and explains the caveats of this usecase.
Whether feasible or not, I believe adding this functionality to
the porcelain is out of the scope of this patch. (And I personally
think that referring to the plumbing in the case of such a special
usage is fine.)
This is currently probably one of the top FAQs at #git and the
--assume-unchanged switch is not widely known; gitignore(5) is the first
place where people are likely to look for it.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch rewrites the general description yet again, first clarifying
the high-level concept, mentioning the difference to remotes and using
the subtree merge strategy, then getting to the details about tree
entries and .gitmodules file.
The patch also makes few smallar grammar fixups within the rest of the
description and clarifies how does 'init' relate to 'update --init'.
Cc: Heikki Orsila <shdl@zakalwe.fi>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace "run_command_v_opt_dir" by "run_command_v_opt_cd".
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note that v1.4.4.5 supports pack index v2, and describe how to keep
your repositories backwards-compatible, shall you need to.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Figuring out how submodules work conceptually is quite a bumpy
ride for a newcomer; the user manual helps (if one knows to actually
look into it), but the reference documentation should provide good
quick intro as well. This patch attempts to do that, with suggestions
from Heikki Orsila.
Cc: Heikki Orsila <shdl@zakalwe.fi>
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing 1.5.6.4 release notes
git fetch-pack: do not complain about "no common commits" in an empty repo
rebase-i: keep old parents when preserving merges
t7600-merge: Use test_expect_failure to test option parsing
Fix buffer overflow in prepare_attr_stack
Fix buffer overflow in git diff
Fix buffer overflow in git-grep
git-cvsserver: fix call to nonexistant cleanupWorkDir()
Documentation/git-cherry-pick.txt et al.: Fix misleading -n description
Conflicts:
RelNotes
The manual page of git-cherry-pick and git-revert asserts that -n works
primarily on the working tree, while in fact the primary object it operates
on is the index, and the changes only "accidentally" propagate to the
working tree. This e.g. leads innocent #git IRC folks to believe that you
can use -n to prepare changes for git-add -i staging.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the files generated and used during a rebase are never to be
tracked, they should live in $GIT_DIR. While at it, avoid the rather
meaningless term "dotest" to "rebase", and unhide ".dotest-merge".
This was wished for on the mailing list, but so far unimplemented.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-add -i ranges expect number-number. But for the supremely lazy, typing in
that second number when selecting "from patch 7 to the end" is wasted effort.
So treat an empty second number in a range as "until the last item".
Signed-off-by: Ciaran McCreesh <ciaran.mccreesh@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change makes "submodule add" much more strict in the arguments it
takes, and is intended to address confusion as recently noted on the
git-list. With this change, the required syntax is:
$ git submodule add URL path
Specifically, this eliminates the form
$ git submodule add URL
which was confused by more than one person as
$ git submodule add path
With this patch, the URL locating the submodule's origin repository can be
either an absolute URL, or (if it begins with ./ or ../) can express the
submodule's repository location relative to the superproject's origin.
This patch also eliminates a third form of URL, which was relative to the
superproject's top-level directory (not its repository). Any URL that was
neither absolute nor matched ./*|../* was assumed to point to a
subdirectory of the superproject as the location of the submodule's origin
repository. This URL form was confusing and does not seem to correspond
to an important use-case. Specifically, no-one has identified the need to
clone from a repository already in the superproject's tree, but if this is
needed it is easily done using an absolute URL: $(pwd)/relative-path. So,
no functionality is lost with this patch. (t6008-rev-list-submodule.sh did
rely upon this relative URL, fixed by using $(pwd).)
Following this change, there are exactly four variants of
submodule-add, as both arguments have two flavors:
URL can be absolute, or can begin with ./|../ and thus names the
submodule's origin relative to the superproject's origin.
Note: With this patch, "submodule add" discerns an absolute URL as
matching /*|*:*: e.g., URL begins with /, or it contains a :. This works
for all valid URLs, an absolute path in POSIX, as well as an absolute path
on Windows).
path can either already exist as a valid git repo, or will be cloned from
the given URL. The first form here eases creation of a new submodule in
an existing superproject as the submodule can be added and tested in-tree
before pushing to the public repository. However, the more usual form is
the second, where the repo is cloned from the given URL.
This specifically addresses the issue of
$ git submodule add a/b/c
attempting to clone from a repository at "a/b/c" to create a new module
in "c". This also simplifies description of "relative URL" as there is now
exactly *one* form: a URL relative to the parent's origin repo.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The document says that a fetch with a configured remote stores what are
fetched in the remote tracking branches "Unlike the longhand form", but
there is no longhand form "fetch" demonstrated earlier.
This adds a missing demonstration of the longhand form, and a new
paragraph to explain why some people might want to fetch before pull.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Invoking git-am or git-mailsplit without mbox or Maildir results in
reading an mbox from stdin. Mention this in the synopsis and usage
strings.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.5.6.3
git-am: Do not exit silently if committer is unset
t0004: fix timing bug
git-mailinfo: document the -n option
Fix backwards-incompatible handling of core.sharedRepository
* ph/parseopt-step-blame:
revisions: refactor handle_revision_opt into parse_revision_opt.
git-shortlog: migrate to parse-options partially.
git-blame: fix lapsus
git-blame: migrate to incremental parse-option [2/2]
git-blame: migrate to incremental parse-option [1/2]
revisions: split handle_revision_opt() from setup_revisions()
parse-opt: add PARSE_OPT_KEEP_ARGV0 parser option.
parse-opt: fake short strings for callers to believe in.
parse-opt: do not print errors on unknown options, return -2 intead.
parse-opt: create parse_options_step.
parse-opt: Export a non NORETURN usage dumper.
parse-opt: have parse_options_{start,end}.
git-blame --reverse
builtin-blame.c: allow more than 16 parents
builtin-blame.c: move prepare_final() into a separate function.
rev-list --children
revision traversal: --children option
The pretty format %an does not respect .mailmap, but gives the exact
author name recorded in the commit. Sometimes it is more desirable,
however, to look if the email has another name mapped to it in .mailmap.
This commit adds %aN (and %cN for the committer name) to do exactly that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/apply-root:
git-apply --directory: make --root more similar to GNU diff
apply --root: thinkofix.
Teach "git apply" to prepend a prefix with "--root=<root>"
"git-branch --merged" is a handy way to list all the branches that have
already been merged to the current branch, but it did not allow checking
against anything but the current branch. Having to switch branches only
to list the branches that are merged with another branch made the feature
practically useless.
This updates the option parser so that "git branch --merged next" is
accepted when you are on 'master' branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing release notes for 1.5.6.3
git-submodule - Fix bugs in adding an existing repo as a module
bash: offer only paths after '--'
Remove unnecessary pack-*.keep file after successful git-clone
make deleting a missing ref more quiet
Various *_HEAD pseudo refs were not documented in any central place.
Especially since we may be teaching rebase and am to record ORIG_HEAD,
it would be a good time to do so.
While at it, reword the explanation on r1..r2 notation to reduce
confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed as git-sh-setup is no longer in the path.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation suggests using "git stash apply" in the
--keep-index workflow even though doing so will lead to clutter
in the stash. And given that the changes are about to be
committed anyway "git stash pop" is more sensible.
Additionally the text preceeding the example claims that it
works for "two or more commits", but the example itself is
really tailored for just two. Expanding it just a little
makes it clear how the procedure generalizes to N commits.
Finally the example is annotated with some commentary to
explain things on a line-by-line basis.
Merge has always set ORIG_HEAD but never mentioned it, while we
recently added it to am and rebase. These facts should be reflected
in the documentation.
git-reset also sets ORIG_HEAD, but that fact is already mentioned in
the very first example so no changes were needed there.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'qq/maint' (early part):
git-svn.perl: workaround assertions in svn library 1.5.0
mailinfo: feed the correct line length to decode_transfer_encoding()
git-clone: remove leftover debugging fprintf().
Fix "config_error_nonbool" used with value instead of key
clone -q: honor "quiet" option over native transports.
attribute documentation: keep EXAMPLE at end
builtin-commit.c: Use 'git_config_string' to get 'commit.template'
http.c: Use 'git_config_string' to clean up SSL config.
diff.c: Use 'git_config_string' to get 'diff.external'
convert.c: Use 'git_config_string' to get 'smudge' and 'clean'
builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix'
Documentation cvs: Clarify when a bare repository is needed
Documentation: be precise about which date --pretty uses
* dr/ceiling:
Eliminate an unnecessary chdir("..")
Add support for GIT_CEILING_DIRECTORIES
Fold test-absolute-path into test-path-utils
Implement normalize_absolute_path
Conflicts:
cache.h
setup.c
Applying a patch in the directory that is different from what the patch
records is done with --directory option in GNU diff. The --root option we
introduced previously does the same, and we can call it the same way to
give users more familiar feel.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* qq/maint:
clone -q: honor "quiet" option over native transports.
attribute documentation: keep EXAMPLE at end
builtin-commit.c: Use 'git_config_string' to get 'commit.template'
http.c: Use 'git_config_string' to clean up SSL config.
diff.c: Use 'git_config_string' to get 'diff.external'
convert.c: Use 'git_config_string' to get 'smudge' and 'clean'
builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix'
Documentation cvs: Clarify when a bare repository is needed
Documentation: be precise about which date --pretty uses
Conflicts:
Documentation/gitattributes.txt
The document gives overall definition of states in DESCRIPTION, describes
various aspects of git operations that can be influenced in EFFECTS, and
finally gives examples in the EXAMPLE section. Archive creation however
was somehow documented after the EXAMPLE section, not insode EFFECTS.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New users sometimes import a project and then immediately
try to use the imported repository as a central shared repository.
This provides pointers about setting up a bare repository for that
in the parts of the documentation dealing with CVS migration.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it explicit that the --pretty formats 'medium' and 'email' use the
author date (and ignore the committer date).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think that some of these uses of italics were meant to be
rendered in quotation marks, anyway.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Italicize those git subcommand names already in teletype we missed.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some manual pages use teletype font to set command names. We
change them to use italics, instead. This creates a visual
distinction between names of commands and command lines that
can be typed at the command line. It is also more consistent
with other man pages outside Git.
In this patch, the commands named are non-git commands like bash.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name `gitk` is sometimes meant to be entered at the command
prompt, but most uses are just referring to the program with that
name (not the incantation to start it).
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This includes nongit commands like RCS 'merge'. This patch only
italicizes names of commands if they had no formatting before.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To tell command names from options in a glance.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The phrase "diff outputs" sounds awkward to my ear (I think
"output" is meant to be used as a substantive noun.)
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-commands moving out of $(bindir), it is useful to make a
clearer distinction between the git subcommand 'git-whatever' and
the command you type, `git whatever <options>`. So we use a dash
after "git" when referring to the former and not the latter.
I already sent a patch doing this same thing, but I missed some
spots.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intent is to make git-commit(1) feel more like a manual page. The
change also makes the page four words shorter.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In listing blocks (set off by rows of dashes), the usual
formatting characters of asciidoc are instead rendered verbatim.
When the escaped double-hyphen of olden days is moved into such a
block along with other formatting improvements, it becomes
backslash-dash-dash.
So we remove the backslash.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git stash save' saves local modifications to a new stash, and runs 'git
reset --hard' to revert them to a clean index and work tree. When the
'--keep-index' option is specified, after that 'git reset --hard' the
previous contents of the index is restored and the work tree is updated
to match the index. This option is useful if the user wants to commit
only parts of his local modifications, but wants to test those parts
before committing.
Also add support for the completion of the new option, and add an
example use case to the documentation.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Restores the stashed state on a new branch rooted at the commit on which
the stash was originally created, so that conflicts caused by subsequent
changes on the original branch can be dealt with.
(Thanks to Junio for this nice idea.)
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* j6t/mingw: (38 commits)
compat/pread.c: Add a forward declaration to fix a warning
Windows: Fix ntohl() related warnings about printf formatting
Windows: TMP and TEMP environment variables specify a temporary directory.
Windows: Make 'git help -a' work.
Windows: Work around an oddity when a pipe with no reader is written to.
Windows: Make the pager work.
When installing, be prepared that template_dir may be relative.
Windows: Use a relative default template_dir and ETC_GITCONFIG
Windows: Compute the fallback for exec_path from the program invocation.
Turn builtin_exec_path into a function.
Windows: Use a customized struct stat that also has the st_blocks member.
Windows: Add a custom implementation for utime().
Windows: Add a new lstat and fstat implementation based on Win32 API.
Windows: Implement a custom spawnve().
Windows: Implement wrappers for gethostbyname(), socket(), and connect().
Windows: Work around incompatible sort and find.
Windows: Implement asynchronous functions as threads.
Windows: Disambiguate DOS style paths from SSH URLs.
Windows: A rudimentary poll() emulation.
Windows: Implement start_command().
...
Adds a new option 'e' to the 'add -p' command loop that lets you edit
the current hunk in your favourite editor.
If the resulting patch applies cleanly, the edited hunk will
immediately be marked for staging. If it does not apply cleanly, you
will be given an opportunity to edit again. If all lines of the hunk
are removed, then the edit is aborted and the hunk is left unchanged.
Applying the changed hunk(s) relies on Johannes Schindelin's new
--recount option for git-apply.
Note that the "real patch" test intentionally uses
(echo e; echo n; echo d) | git add -p
even though the 'n' and 'd' are superfluous at first sight. They
serve to get out of the interaction loop if git add -p wrongly
concludes the patch does not apply.
Many thanks to Jeff King <peff@peff.net> for lots of help and
suggestions.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git apply --root=<root>", all file names in the patch are prepended
with <root>. If a "-p" value was given, the paths are stripped _before_
prepending <root>.
Wished for by HPA.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We saw this explanation repeated on the mailing list a few times. Even
though the description of individual options to particular commands are
explained in their manual pages, the reason behind choosing which is which
has not been clearly explained in any of the documentation.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the dashed forms of git commands not in $(bindir), we have
to change many instances of "git-command" to "git command". Also,
for consistency it is at times appropriate to make the opposite
change. In some cases, the change is not so simple as changing one
character.
This patch gets rid of some of those cases by rewrapping lines.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the example inetd.conf lines in git-daemon(1), it was
assumed that `git-daemon` resides in the user's /usr/bin.
With this patch, we only assume `git` is in /usr/bin.
The stronger assumption fails in the default installation
nowadays.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The manual page for the command invoked as "git clone" is named
git-clone(1), and similarly for the rest of the git commands.
Make sure our first example of this in tutorials makes it clear
that it is the first two words of a command line that make up the
command's name (that is: for example, the effect of "git svn
dcommit" is described in git-svn(1)).
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change leading spaces to tabs to match the rest of the file.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the conversion of HTML documentation to man pages
tutorial.html -> gittutorial (7)
tutorial-2.html -> gittutorial-2 (7)
cvs-migration.html -> gitcvs-migration (7)
diffcore.html -> gitdiffcore (7)
repository-layout.html -> gitrepository-layout (5)
hooks.html -> githooks (5)
glossary.html -> gitglossary (7)
core-tutorial.html -> gitcore-tutorial (7)
and the automatic update of references to these pages,
a little debris was left behind. We clear it away.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/send-email-ssl:
git-send-email: prevent undefined variable warnings if no encryption is set
git-send-email: add support for TLS via Net::SMTP::SSL
For everything other than using "git config" to read or write a
git-style config file that isn't the current repo's config file,
GIT_CONFIG was actively detrimental. Rather than argue over which
programs are important enough to have work anyway, just fix all of
them at the root.
Also removes GIT_LOCAL_CONFIG, which would only be useful for programs
that do want to use global git-specific config, but not the repo's own
git-specific config, and want to use some other, presumably
git-specific config. Despite being documented, I can't find any sign that
it was ever used.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rev-parse manpage introduces the branch@{date} syntax,
and mentions the reflog specifically. However, new users may
not be familiar with the distinction between the reflog and
the commit date, so let's help them out with a "you may be
interested in --until" pointer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-parse-remote and git-sh-setup are not installed in
$(bindir) anymore, the shell script library won't be found on
user's $PATH in general.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-svn: don't sanitize remote names in config
git-svn: avoid filling up the disk with temp files.
git cat-file: Fix memory leak in batch mode
fix git config example syntax
avoid off-by-one error in run_upload_archive
This removes, from the documentation and the bash completion script, the
two config options that were introduced by the git-whatchanged.sh script
and lost in the C rewrite. Today, we can use aliases as an alternative.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-config expects a space, not '=' between option and value.
Also, quote the value since it contains globs, which some shells will not
pass through unchanged, or will abort if the glob doesn't expand.
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes, the easiest way to fix up a patch is to edit it directly, even
adding or deleting lines. Now, many people are not as divine as certain
benevolent dictators as to update the hunk headers correctly at the first
try.
So teach the tool to do it for us.
[jc: with tests]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a very well established command line convention that old residents
of the git mailing list knew by heart and nobody even thought about
documenting it explicitly, which was not very nice.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes it is desirable to have non-fast-forward branches in a
shared repository. A typical example of that is the 'pu' branch.
This patch extends the format of allowed-users and allow-groups
files by using the '+' sign at the beginning as the mark that
non-fast-forward pushes are permitted to the branch.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do this by handing over the Net::SMTP instance to Net::SMTP::SSL,
which avoids Net::SMTP::TLS and its weird error checking. This trick
is due to Brian Evins.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As announced for 1.6.0.
Git older than version 1.5.2 (or any other git version with this option
set to 1) may revert to version 1 of the pack index by manually deleting
all .idx files and recreating them using 'git index-pack'. Communication
over the git native protocol is unaffected since the pack index is never
transferred.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
GIT 1.5.6.1
fix update-hook-example to work with packed tag references
clone: create intermediate directories of destination repo
for-each-ref: implement missing tag values
git-rebase.sh: Add check if rebase is in progress
* lt/config-fsync:
Add config option to enable 'fsync()' of object files
Split up default "i18n" and "branch" config parsing into helper routines
Split up default "user" config parsing into helper routine
Split up default "core" config parsing into helper routine
The update-hook-example used 'test -f' to check the tag present, which
does not work if the checked reference is packed. This check has been
changed to use 'git rev-parse $tag' instead.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As announced for 1.6.0.
Access over the native protocol by old git versions is unaffected as
this capability is negociated by the protocol. Otherwise setting this
config option to "false" and doing a 'git repack -a -d' is enough to
remain compatible with ancient git versions (older than 1.4.4).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to mark hooks we ship as samples by making them unexecutable, but
some filesystems cannot tell what is executable and what is not.
This makes it much more explicit. The hooks are suffixed with .sample
(but now are made executable), so enabling it is still one step operation
(instead of "chmod +x $hook", you would do "mv $hook.sample $hook") but
now they won't get accidentally enabled on systems without executable bit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Extend parse-options test suite
api-parse-options.txt: Introduce documentation for parse options API
parse-options.c: fix documentation syntax of optional arguments
api-builtin.txt: update and fix typo
Add some documentation of basics, macros and callback
implementation of the parse-options API.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mention NEED_WORK_TREE flag and command-list.txt.
Fix "bulit-in" typo and AsciiDoc-formatting of a paragraph.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option behaves more like:
git push $url +refs/*:refs/*
than it does like:
git push $url +refs/heads/*:refs/heads/* +refs/tags/*:refs/tags/*
so we should document it to be more clear about that.
Suggested-by: Marek Zawirski <marek.zawirski@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script appp.sh can be used with the External Editor extension for
Mozilla Thunderbird in order to be able to send inline patches in an
easy way.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to a misplaced list block separator, general hints about the config
file options got indented at the same level as the description of the last
option, making it easy to miss them.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds the --import-marks and --export-marks to fast-export. These import
and export the marks used to for all revisions exported in a similar fashion
to what fast-import does. The format is the same as fast-import, so you can
create a bidirectional importer / exporter by using the same marks file on
both sides.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As explained in the documentation[*] this is totally useless on
filesystems that do ordered/journalled data writes, but it can be a
useful safety feature on filesystems like HFS+ that only journal the
metadata, not the actual file contents.
It defaults to off, although we could presumably in theory some day
auto-enable it on a per-filesystem basis.
[*] Yes, I updated the docs for the thing. Hell really _has_ frozen
over, and the four horsemen are probably just beyond the horizon.
EVERYBODY PANIC!
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When initializing the struct async and struct child_process structures,
the documentation suggested "clearing" the structure with '0' instead of
'\0'. It is enough to use integer zero here.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option -u stands for --update and it is a good idea to make it clear
especially because this is the only mode of operation of "git add" that
does something different from "adding". Give longer --force synonym to -f
while we are at it as well.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... because we are now bisecting using a detached HEAD.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* om/remote-fix:
"remote prune": be quiet when there is nothing to prune
remote show: list tracked remote branches with -n
remote prune: print the list of pruned branches
builtin-remote: split show_or_prune() in two separate functions
remote show: fix the -n option
Higher stages store the blobs involved from their side verbatim. Removal
of uninteresting hunks are done by "diff --cc" upon demand and not stored
in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already had a hack to exclude @pxref{[URLS]} from the texi stream that
refers to nonexistent anchor.
This allows "make info" to produce gitman.info again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike other manual pages (e.g. git-blame.txt), this used *NOTE:*
to show a side note headed with boldface string "NOTE". Use a paragraph
headed by [NOTE] like others instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command is really too quiet which make it unconfortable to use.
Also implement a --dry-run option, in place of the original -n one, to
list stale tracking branches that will be pruned, but do not actually
prune them.
Add a test case for --dry-run.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perl version accepted a -n flag, to show local informations only
without querying remote heads, that seems to have been lost in the C
revrite.
This restores the older behaviour and add a test case.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without [verse], the line break between the two synopsis lines does
not make it into the man page.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new argument teaches Git to not look for any untracked files,
saving cycles on slow file systems, or large repos.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
This lets you specify how you want untracked files to be listed.
The possible options are:
normal - Show untracked files and directories
all - Show all untracked files
The 'all' mode is used, if the mode is not specified.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Paths marked with this attribute are not output to git-archive
output.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also split the "-c or -C <commit>" item into two separate items.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fixes the SYNOPSIS in git-commit.txt:
* --amend could be used in conjunction with -c/-C/-F/-m;
it is not mutually exclusive with them.
* -m and -F are not alternative options to -c/-C;
you can reuse authorship from a commit (-c/-C)
but change the message (-m/-F).
Furthermore, for long-option consistency --author <author>
is changed to --author=<author>.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch renames the following documents and at the same time converts
them to the man format:
diffcore.txt -> gitdiffcore.txt (man section 7)
repository-layout.txt -> gitrepository-layout.txt (man section 5)
Other documents that reference the above ones are changed accordingly.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrapped synopsis and removed wrong asterisk behind --count option;
clarified --sort=<key> description for multiple keys; documented that
for-each-ref supports not only glob patterns but also prefixes like
"refs/heads" as patterns, and that multiple patterns can be given.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All functions in strbuf.h are documented, except launch_editor().
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The log family and git-rev-list share the same set of options that come
from revision walking machinery, but they both have options unique to
them. Notably, --header, --timestamp, --stdin and --quiet apply only to
rev-list. Exclude them from the git-log documentation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Giving the old sha1 is already optional when changing a ref, and it's
quite handy when running update-ref manually. So make it optional for
deleting a ref too.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old description was misleading and logically impossible. It claimed that
the ancestors of the original commit would be re-written to have the multiple
emitted ids as parents. Not only would this modify existing objects, but it
would create a cycle. What this actually does is pass the multiple emitted ids
to the newly-created children to use as parents.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They now point to more specific/appropriate targets.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch renames the following documents and at the same time converts
them to the man format:
core-tutorial.txt -> gitcore-tutorial.txt
glossary.txt -> gitglossary.txt
But as the glossary is included in the user manual and as the new
gitglossary man page cannot be included as a whole in the user manual,
the actual glossary content is now in its own "glossary-content.txt"
new file. And this file is included by both the user manual and the
gitglossary man page.
Other documents that reference the above ones are changed accordingly
and sometimes improved a little too.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with multiple branches in an svn repository, it can be
useful to verify the svn repository and local tracking branch that will
be used for the rebase operation.
Signed-off-by: Seth Falcon <seth@userprimary.net>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alter the description of <repository> in OPTIONS section to
explicitly state that a 'remote name' is accepted.
Rewrite REMOTES section to more directly identify the
different kinds of remote-name permitted.
Signed-off-by: John J. Franey <jjfraney@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately the list is not complete, but includes the essential ones.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous documentation didn't make it clear that the
"assume unchanged" was on per file basis, and not a global
flag.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is unfortunate that "git init --bare" does not work and the only reason
why "init" did not learn its own "--bare" option is because "git --bare
init" already does the job (and as an option to the git 'potty', it is
more generic solution).
This teaches "git init" its own "--bare" option, so that both "git --bare init"
and "git init --bare" works mostly the same way.
[jc: rewrote the log message and added test]
Signed-off-by: Luciano Rocha <strange@nsk.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Geoffrey Irving noticed that git-cherry talks about comparing commits without
hinting how they are compared.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The <git-rev-list args> are mandatory to git bundle create, not
optional. The usage output of git bundle is already right on this.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/diff-no-no-index:
git diff --no-index: default to page like other diff frontends
git-diff: allow --no-index semantics a bit more
"git diff": do not ignore index without --no-index
diff-files: do not play --no-index games
tests: do not use implicit "git diff --no-index"
Preformatted html and man pages show a mangled graph, caused by a
backslash.
Commit f1ec6b22a8 fixed this same issue,
but it seems that new versions of the Asciidoc toolchain changed their
behaviour.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* as/graph:
get_revision(): honor the topo_order flag for boundary commits
Fix output of "git log --graph --boundary"
log --graph --left-right: show left/right information in place of '*'
graph API: don't print branch lines for uninteresting merge parents
graph API: fix graph mis-alignment after uninteresting commits
* ar/batch-cat:
change quoting in test t1006-cat-file.sh
builtin-cat-file.c: use parse_options()
git-svn: Speed up fetch
Git.pm: Add hash_and_insert_object and cat_blob
Git.pm: Add command_bidi_pipe and command_close_bidi_pipe
git-hash-object: Add --stdin-paths option
Add more tests for git hash-object
Move git-hash-object tests from t5303 to t1007
git-cat-file: Add --batch option
git-cat-file: Add --batch-check option
git-cat-file: Make option parsing a little more flexible
git-cat-file: Small refactor of cmd_cat_file
Add tests for git cat-file
* ap/svn:
git-svn: add test for --add-author-from and --use-log-author
git-svn: add documentation for --add-author-from option.
git-svn: Add --add-author-from option.
git-svn: add documentation for --use-log-author option.
* js/cvsexportcommit:
cvsexportcommit: introduce -W for shared working trees (between Git and CVS)
cvsexportcommit: chomp only removes trailing whitespace
Conflicts:
git-cvsexportcommit.perl
* js/ignore-submodule:
Ignore dirty submodule states during rebase and stash
Teach update-index about --ignore-submodules
diff options: Introduce --ignore-submodules
* mo/cvsserver:
Documentation: Fix skipped section level
git-cvsserver: add ability to guess -kb from contents
implement gitcvs.usecrlfattr
git-cvsserver: add mechanism for managing working tree and current directory
With the --graph option, the graph already outputs 'o' instead of '*'
for boundary commits. Make it emit '<' or '>' when --left-right is
specified.
(This change also disables the '^' prefix for UNINTERESTING commits.
The graph code currently doesn't print anything special for these
commits, since it assumes no UNINTERESTING, non-BOUNDARY commits are
displayed. This is potentially a bug if UNINTERESTING non-BOUNDARY
commits can actually be displayed via some code path.)
[jc: squashed the left-right change from Dscho and Adam's fixup into one]
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch renames the following documents and at the same time converts
them to the man page format:
cvs-migration.txt -> gitcvs-migration.txt
tutorial.txt -> gittutorial.txt
tutorial-2.txt -> gittutorial-2.txt
These new man pages are put in section 7, and other documents that reference
the above ones are change accordingly.
[jc: with help from Nanako to clean things up]
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Being able to say "git diff A B" outside a git repository and getting a
colourful version of "diff -u A B" may be nice, but such a cute hack
should not give bogus results to scripts that want to give two paths,
either or both of which happen to have been removed from the work tree,
to "git diff-files".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/repack:
Documentation/git-repack.txt: document new -A behaviour
let pack-objects do the writing of unreachable objects as loose objects
add a force_object_loose() function
builtin-gc.c: deprecate --prune, it now really has no effect
git-gc: always use -A when manually repacking
repack: modify behavior of -A option to leave unreferenced objects unpacked
Conflicts:
builtin-pack-objects.c
* maint:
rev-parse --symbolic-full-name: don't print '^' if SHA1 is not a ref
Add missing "short" alternative to --date in rev-list-options.txt
git-show.txt: Not very stubby these days.
Clarify repack -n documentation
log.date config variable sets the default date-time mode for the log
command. Setting log.date value is similar to using git log's --date
option.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git recognize a new environment variable that prevents it from
chdir'ing up into specified directories when looking for a GIT_DIR.
Useful for avoiding slow network directories.
For example, I use git in an environment where homedirs are automounted
and "ls /home/nonexistent" takes about 9 seconds. Setting
GIT_CEILING_DIRS="/home" allows "git help -a" (for bash completion) and
"git symbolic-ref" (for my shell prompt) to run in a reasonable time.
Signed-off-by: David Reiss <dreiss@facebook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides additional warning to users when attempting to
commit to a detached HEAD. It is configurable in color.status.nobranch.
Signed-off-by: Chris Parsons <chris@edendevelopment.co.uk>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While repacking a local repository a coworker thought the -n option
was necessary to git-repack to keep it from updating some unknown
file on the central server we all share. Explaining further what
the option is (not) doing helps to make it clear the option does
not impact any remote repositories the user may have configured.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With xmlto 0.0.18 it seems to demand that no section levels are
skipped. The commit 'implement gitcvs.usecrlfattr' (8a06a63297)
one such skip, which here is removed by increasing the level of the
offender.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ar/add-unreadable:
Add a config option to ignore errors for git-add
Add a test for git-add --ignore-errors
Add --ignore-errors to git-add to allow it to skip files with read errors
Extend interface of add_files_to_cache to allow ignore indexing errors
Make the exit code of add_file_to_index actually useful
For a given project the directory used with the -w option is almost always
the same each time. Let it be specified with 'cvsexportcommit.cvsdir' so
it's not necessary to manually add it with -w each time.
Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Acked-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-daemon upload-archive feature has always used the
config directive 'daemon.uploadarch'; the documentation
which came later seems to have just mistakenly used the
wrong name.
Noticed by lionel@over-blog.com.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is not initialized and you do not want to change the
defaults from .gitmodules anyway, you can now say
$ git submodule update --init <name>
When "update" is called without --init on an uninitialized submodule,
a hint to use --init is printed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add paragraph for the -A option, and describe the new behaviour
that makes unreachable objects loose.
Signed-off-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "brower.konqueror.path" to "browser.konqueror.path" in
documentation.
Signed-off-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "gitcvs.allbinary" is set to "guess", then any file that has
not been explicitly marked as binary or text using the "crlf" attribute
and the "gitcvs.usecrlfattr" config will guess binary based on the contents
of the file.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If gitcvs.usecrlfattr is set to true, git-cvsserver will consult
the "crlf" for each file to determine if it should mark the file
as binary (-kb).
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you have a CVS checkout, it is easy to import the CVS history by
calling "git cvsimport". However, interacting with the CVS repository
using "git cvsexportcommit" was cumbersome, since that script assumes
separate working directories for Git and CVS.
Now, you can call cvsexportcommit with the -W option. This will
automatically discover the GIT_DIR, and it will check out the parent
commit before exporting the commit.
The intended workflow is this:
$ CVSROOT=$URL cvs co module
$ cd module
$ git cvsimport
hack, hack, hack, making two commits, cleaning them up using rebase -i.
$ git cvsexportcommit -W -c -p -u HEAD^
$ git cvsexportcommit -W -c -p -u HEAD
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like with the diff machinery, update-index should sometimes just
ignore submodules (e.g. to determine a clean state before a rebase).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option --ignore-submodules can now be used to ignore changes in
submodules.
Why? Sometimes it is not interesting when a submodule changed.
For example, when reordering some commits in the superproject, a dirty
submodule is usually totally uninteresting. So we will use this option
in git-rebase to test for a dirty working tree.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarifies the git-prune man page, documenting that it only
prunes unpacked objects.
Signed-off-by: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mv/format-cc:
Add tests for sendemail.cc configuration variable
git-send-email: add a new sendemail.cc configuration variable
git-format-patch: add a new format.cc configuration variable
git-svn blame produced output in the format of git blame; in environments
where there are scripts that read the output of svn blame, it's useful
to be able to use them with the output of git-svn. The git-compatible
format is still available using the new "--git-format" option.
This also fixes a bug in the initial git-svn blame implementation; it was
bombing out on uncommitted local changes.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option --no-binary to git-format-patch so that no binary
changes are included in the generated patches, only notices that those
files changed. This generate patches that cannot be applied, but still
is useful for generating mails for code review purposes.
See also: commit e47f306d4b, where --binary
option was turned on by default.
Signed-off-by: Caio Marcelo de Oliveira Filho <cmarcelo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change cd67e4d4 introduced a new configuration parameter that told
pull to automatically perform a rebase instead of a merge. This
change provides a configuration option to enable this feature
automatically when creating a new branch.
If the variable branch.autosetuprebase applies for a branch that's
being created, that branch will have branch.<name>.rebase set to true.
Signed-off-by: Dustin Sallings <dustin@spy.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/help:
documentation: web--browse: add a note about konqueror
documentation: help: add info about "man.<tool>.cmd" config var
help: use "man.<tool>.cmd" as custom man viewer command
documentation: help: add "man.<tool>.path" config variable
help: use man viewer path from "man.<tool>.path" config var
The "-u" option is described only in terms of "updating"
files, which in turn is described only as "similar to what
git commit -a does". Let's be a little more specific about
what updating entails.
Suggested by Geoffrey Irving.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, there were no "git bisect run" example.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git gui' has a number of options that can be specified using the
options dialog. Sometimes it is convenient to be able to specify these
from the command line, therefor document these options.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Acked-by: Shawn O. Pearce <speace@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch in "git-add.txt" and "git-format-patch.txt", the
commands used in the examples were "git-CMD" instead of "git CMD".
This patch fixes that.
In "git-pull.txt" only the last example had the code sample in an
asciidoc "Listing Block", and in the other two files, none.
This patch fixes that by putting all code samples in listing
blocks.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--batch is similar to --batch-check, except that the contents of each object is
also printed. The output's form is:
<sha1> SP <type> SP <size> LF
<contents> LF
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new option allows multiple objects to be specified on stdin. For each
object specified, a line of the following form is printed:
<sha1> SP <type> SP <size> LF
If the object does not exist in the repository, a line of the following form is
printed:
<object> SP missing LF
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lh/git-file:
Teach GIT-VERSION-GEN about the .git file
Teach git-submodule.sh about the .git file
Teach resolve_gitlink_ref() about the .git file
Add platform-independent .git "symlink"
* lh/branch-merged:
Add tests for `branch --[no-]merged`
git-branch.txt: compare --contains, --merged and --no-merged
git-branch: add support for --merged and --no-merged
This new option causes a text-based representation of the history to be
printed to the left of the normal output.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new API allows the commit history to be displayed as a text-based
graphical representation.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a branch named "bisect" or "new-bisect" already was created in the
repo by other means than git bisect, doing a git bisect used to override
the branch without a warning. Now if the branch "bisect" or
"new-bisect" already exists, and it was not created by git bisect itself,
git bisect start fails with an appropriate error message. Additionally,
if checking out a new bisect state fails due to a merge problem, git
bisect cleans up the temporary branch "new-bisect".
The accidental override has been noticed by Andres Salomon, reported
through
http://bugs.debian.org/478647
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch provides a way to specify "push matching heads" using a
special refspec ":". This is useful because it allows "push = +:"
as a way to specify that matching refs will be pushed but, in addition,
forced updates will be allowed, which was not possible before.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of rename limiting is to bound the amount of time
we spend figuring out inexact renames. Currently we use a
single value, diff.renamelimit, for all situations. However,
it is probably the case that a user is willing to spend more
time finding renames during a merge than they are while
looking at git-log.
This patch provides a way of setting those values separately
(though for backwards compatibility, merge still falls back
on the diff renamelimit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most users should be using git-gc instead of directly
calling prune. For those who really do want more information
on pruning, let's point them at git-fsck, which goes into
slightly more detail on reachability.
And since we're pointing users there, let's make sure
reflogs are mentioned in git-fsck(1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some projects prefer to always CC patches to a given mailing list. In
these cases, it's handy to configure that address once.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently "git rev-parse --verify <something>" is often used with
its error output redirected to /dev/null. This patch makes it
easier to do that.
The -q|--quiet option is designed to work the same way as it does
for "git symbolic-ref".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This note explains how to work around the fact that we try to use
kfmclient to launch konqueror.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch also describes the current behavior for "konqueror" and
how to modify it using "man.<tool>.cmd" if needed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch documents the "man.<tool>.path" configuration
variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I often find myself pulling patches off of other peoples trees using
cherry-pick, and following it with an immediate 'git commit --amend -s'
command. Eliminate the need for a double commit by allowing signoff on a
cherry-pick or revert.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
remote: create fetch config lines with '+'
push: allow unqualified dest refspecs to DWIM
doc/git-gc: add a note about what is collected
t5516: remove ambiguity test (1)
Linked glossary from cvs-migration page
write-tree: properly detect failure to write tree objects
It seems to be a FAQ that people try running git-gc, and
then get puzzled about why the size of their .git directory
didn't change. This note mentions the reasons why things
might unexpectedly get kept.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coming from CVS, I found the git glossary vital to learning git and learning
how terms in git correlate to the cvs terminology with which I am familiar.
This patch links the glossary from the cvs-migration page so cvs users will
be able to fine the glossary as soon as they start looking at git documents.
Signed-off-by: Matt Graham <mdg149@gmail.com>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Amend git-push refspec documentation
git-gc --prune is deprecated
svn-git: Use binmode for reading/writing binary rev maps
diff options documentation: refer to --diff-filter in --name-status
Don't force imap.host to be set when imap.tunnel is set
git-clone.txt: Adjust note to --shared for new pruning behavior of git-gc
git-svn bug with blank commits and author file
archive.c: format_subst - fixed bogus argument to memchr
copy.c: copy_fd - correctly report write errors
gitattributes: Fix subdirectory attributes specified from root directory
These paragraphs are a little confusing. Also, make it clearer when
you have to specify the full name for <dst>
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
25ee9731c1 made the '--prune' option
deprecated and removed its description from the git-gc man page. This
patch removes all references to this option from the rest of the Git
documentation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git diff --name-status outputs letters, but the meaning of those letters
is documented elsewhere. Add a note to make the manpage more intuitive.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git-gc now always calls prune, even with --auto, unreferenced objects
may be removed by more operations than just git-gc. This is important for
clones created using --shared or --reference.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
post-receive-email: fix accidental removal of a trailing space in signature line
Escape project names before creating pathinfo URLs
Escape project name in regexp
bash: Add completion for git diff --base --ours --theirs
diff-options.txt: document the new "--dirstat" option
This commit adds the documentation for the new option added by 7df7c01
(Add "--dirstat" for some directory statistics, 2008-02-12).
Noticed by Clint Adams, reported through
http://bugs.debian.org/476437
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a remote.*.mirror configuration option that,
when set, automatically puts git-push in --mirror mode for that
remote.
Furthermore, the option is set automatically by `git remote
add --mirror'.
The code in remote.c to parse remote.*.skipdefaultupdate
had a subtle problem: a comment in the code indicated that
special care was needed for boolean options, but this care was
not used in parsing the option. Since I was touching related
code, I did this fix too.
[jc: and I further fixed up the "ignore boolean" code.]
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options filter the output from git branch to only include branches
whose tip is either merged or not merged into HEAD.
The use-case for these options is when working with integration of branches
from many remotes: `git branch --no-merged -a` will show a nice list of merge
candidates while `git branch --merged -a` will show the progress of your
integration work.
Also, a plain `git branch --merged` is a quick way to find local branches
which you might want to delete.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: Fix 'history' view for deleted files with history
Document that WebDAV doesn't need git on the server, and works over SSL
git-remote: reject adding remotes with invalid names
am: POSIX portability fix
I managed to set up a Git repository on a preconfigured WebDAV server,
and using HTTPS, without installing Git on it or changing the server
configuration. This works through a proxy too. This patch reflects
this (it previously stated that Git was _necessary_ on the server,
which isn't true). Also give a few hints to troubleshoting.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git init --shared=0xxx, where '0xxx' is an octal number, will create
a repository with file modes set to '0xxx'. Users with a safe umask
value (0077) can use this option to force file modes. For example,
'0640' is a group-readable but not group-writable regardless of
user's umask value. Values compatible with old Git versions are written
as they were before, for compatibility reasons. That is, "1" for
"group" and "2" for "everybody".
"git config core.sharedRepository 0xxx" is also handled.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do some verb-noun agreement changes.
Clarify some file globbing cases.
Fixed a wrong statement in an example.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-bisect: make "start", "good" and "skip" succeed or fail atomically
git-am: cope better with an empty Subject: line
Ignore leading empty lines while summarizing merges
bisect: squelch "fatal: ref HEAD not a symref" misleading message
builtin-apply: Show a more descriptive error on failure when opening a patch
Clarify documentation of git-cvsserver, particularly in relation to git-shell
* maint-1.5.4:
git-bisect: make "start", "good" and "skip" succeed or fail atomically
git-am: cope better with an empty Subject: line
Ignore leading empty lines while summarizing merges
bisect: squelch "fatal: ref HEAD not a symref" misleading message
builtin-apply: Show a more descriptive error on failure when opening a patch
Clarify documentation of git-cvsserver, particularly in relation to git-shell
For SSH clients restricted to git-shell, CVS_SERVER does not have to be
specified, because git-shell understands the default value of 'cvs' to
mean git-cvsserver'. This makes it totally transparent to CVS users, but
the instruction to set up CVS access for people with real shell access
does not apply.
Previous wording mentioning GIT_AUTHOR, GIT_COMMITTER variables was
unclear that we really meant GIT_AUTHOR_(NAME|EMAIL), etc.
Note that the .ssh/environment file is a good place to set these, and that
the .bashrc is shell-specific. Add a bit of text to differentiate cvs -d
(setting CVSROOT) from cvs co -d (setting the name of the newly checked
out directory). Removed an extra 'Example:' string.
Signed-off-by: Scott Collins <scc@ScottCollins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches 'git commit/status' show a new 'Modified submodules'
section, which is an output from:
git submodule summary --cached --for-status --summary-limit <limit>
just before the 'Untracked files' section.
The <limit> is given by the config variable status.submodulesummary
to limit the submodule summary size. status.submodulesummary is a
bool/int variable with value:
- false or 0 by default to disable the summary, or
- positive number to limit the summary size, or
- true or negative number to unlimit the summary size.
Also mention status.submodulesummary in the documentation.
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are the command line option equivalents of the 'merge.log' config
variable.
The patch also updates documentation and bash completion accordingly, and
adds a test.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are new synonyms to the '--(no-)summary' option and the
'merge.summary' config variable, but are consistent with the soon to be
added 'merge --(no-)log' options. The 'merge.summary' config variable and
'--(no-)summary' options are still accepted, but are advertised to be
removed in the future.
'merge.log' takes precedence over 'merge.summary' if they are both set
inconsistently.
Update documentation and tests accordingly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable has the same effect, as 'merge.diffstat'.
Also mention it in the documentation.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option has the same effect as '--(no-)summary' (i.e. whether to
show a diffsat at the end of the merge or not), and it is consistent
with the '--stat' option of other git commands.
Documentation, tests, and bash completion are updaed accordingly, and the
old --summary option is marked as being deprected.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include the new file from config.txt and git-merge.txt.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
git-submodule: Avoid 'fatal: cannot describe' message
Force the medium pretty format on calls to git log
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
* maint-1.5.4:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
Users are not often aware of the fact that "git bisect -h" can give
them a long usage description, as "git bisect" seems to accept only
dashless subcommands like "start", "good", ...
That's why this patch adds a "git bisect help" subcommand that just
calls "git bisect -h". This new subcommand is also fully documented
in the short usage string (that "git bisect" gives), in the long
usage string and in the man page (that "git help bisect" gives).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tagger is equal to the committer, not the author, so
GIT_COMMITTER_DATE is the right environment variable to use, not
GIT_AUTHOR_DATE.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its documentation was removed by 6c96753 (Documentation/git-commit: rewrite
to make it more end-user friendly, 2006-12-08), even though it is referenced
from a few places, including builtin-commit.c (as part of the commentary in
the commit message template).
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-fetch: fix status output when not storing tracking ref
core-tutorial.txt: Fix showing the current behaviour.
git-archive: ignore prefix when checking file attribute
Fix documentation syntax of optional arguments in short options.
* maint-1.5.4:
core-tutorial.txt: Fix showing the current behaviour.
git-archive: ignore prefix when checking file attribute
Fix documentation syntax of optional arguments in short options.
The --root option from "git diff-tree" won't do nothing
when is given to commands like git-whatchanged or git-log,
because those always print the initial commit by default.
This fixes the tutorial explaining the function of the
log.showroot configuration variable.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an argument for an option is optional, like in -n from git-tag,
puting a space between the option and the argument is interpreted
as a missing argument for the option plus an isolated argument.
Documentation now reflects the need to write the parameter following
the option -n, as in "git tag -nARG", for instance.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows .git to be a regular textfile containing the path of
the real git directory (prefixed with "gitdir: "), which can be useful on
platforms lacking support for real symlinks.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/unpack-careful:
t5300: add test for "index-pack --strict"
receive-pack: allow using --strict mode for unpacking objects
unpack-objects: fix --strict handling
t5300: add test for "unpack-objects --strict"
unpack-objects: prevent writing of inconsistent objects
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a bit confusing on first read, that
"The packed archive format (.pack) is designed
to be unpackable..."
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rate of fixes that trickle in has slowed and we are definitely
getting there. Hopefully one final round and we will have the final
1.5.5 soon.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive mode does not work with files whose names contain
characters that need C-quoting. `core.quotepath` configuration can be
used to work this limitation around to some degree, but backslash,
double-quote and control characters will still have problems.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for creating a new tag object and retaining the tag message,
author, and date when rewriting tags. The gpg signature, if one exists,
will be stripped.
This adds nearly proper tag name filtering to filter-branch. Proper tag
name filtering would include the ability to change the tagger, tag date,
tag message, and _not_ strip a gpg signature if the tag did not change.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds a gitcvs.dbtablenameprefix config variable, the contents of which
are prepended to any database tables names used by git-cvsserver. The
same substutions as gitcvs.dbname and gitcvs.dbuser are supported, and
any non-alphabetic characters are replaced with underscores.
A typo found in contrib/completion/git-completion.bash is also fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes for 1.5.4.5
Documentation: clarify use of .git{ignore,attributes} versus .git/info/*
t/t3800-mktag.sh: use test_must_fail rather than '!'
Conflicts:
t/t3800-mktag.sh
gitignore patterns can be read from three different
files, while gitattributes can come from two files. Let's
provide some hints to the user about the differences and how
they are typically used.
Suggested by Toby Corkindale, but gratuitously reworded by Jeff King.
Signed-off-by: Toby Corkindale <toby.corkindale@rea-group.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Texts between ~ and ~ will be subscripted during the asciidoc translation.
Signed-off-by: Guanqun Lu <Guanqun.Lu@Gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(cherry picked from commit 0c829391cf)
For a while now, git-checkout has been more powerful than the man-page
summary would suggest (the main text does describe the new features),
so update the summary to hopefully better reflect the current
functionality. Also update the glossary description of the word checkout.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Texts between ~ and ~ will be subscripted during the asciidoc translation.
Signed-off-by: Guanqun Lu <Guanqun.Lu@Gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout and branch recently learnt to track local branches when
branch.autosetupmerge = always, but they _also_ learnt to do that when
asked explicitely with the option "--track".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a %xXX format which inserts two hexdigits after %x as a byte
value in the resulting string. This can be used to add a NUL byte or any
other byte that can make machine parsing easier. It is also necessary to
use fwrite to print out the data since printf will terminate if you feed
it a NUL.
Signed-off-by: Govind Salinas <blix@sophiasuchtig.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent discussion on the list, with the improvement f7c22cc (always start
looking up objects in the last used pack first, 2007-05-30) brought in,
reached the concensus that the current default 20 is too low.
Reference: http://thread.gmane.org/gmane.comp.version-control.git/77586
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fast-import documentation currently does not document the behaviour
of "merge" when there is no "from" in a commit. This patch adds a
description of what happens: the commit is created with a parent, but
no files. This behaviour is equivalent to "from" followed by
"filedeleteall".
Signed-off-by: Eyvind Bernhardsen <eyvind-git@orakel.ntnu.no>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add sendemail.smtpserverport to the Configuration section
of the git-send-email manpage. It should probably be
referenced in the --smtp-server-port option as well.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give a direct hint to those who feel highly annoyed by the auto gc
behavior.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was already some documentation about subtree under
Documentation/howto but it was missing from git-merge manpage.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Make man page building quiet when DOCBOOK_XSL_172 is defined
git-new-workdir: Share SVN meta data between work dirs and the repository
rev-parse: fix meaning of rev~ vs rev~0.
git-svn: don't blindly append '*' to branch/tags config
Tell xmlto to repress printing of the lines:
Note: meta date : No date. Using generated date git-xyx
Note: Writing git-xyz.1
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
merge-file: handle empty files gracefully
merge-recursive: handle file mode changes
Minor wording changes in the keyboard descriptions in git-add --interactive.
git fetch: Take '-n' to mean '--no-tags'
quiltimport: fix misquoting of parsed -p<num> parameter
git-quiltimport: better parser to grok "enhanced" series files.
The wording of the interactive help text from git-add--interactive.perl is
clearer. Just duplicate that text here.
Signed-off-by: Vineet Kumar <vineet@doorstop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only reason we did not call "prune" in git-gc was that it is an
inherently dangerous operation: if there is a commit going on, you will
prune loose objects that were just created, and are, in fact, needed by the
commit object just about to be created.
Since it is dangerous, we told users so. That led to many users not even
daring to run it when it was actually safe. Besides, they are users, and
should not have to remember such details as when to call git-gc with
--prune, or to call git-prune directly.
Of course, the consequence was that "git gc --auto" gets triggered much
more often than we would like, since unreferenced loose objects (such as
left-overs from a rebase or a reset --hard) were never pruned.
Alas, git-prune recently learnt the option --expire <minimum-age>, which
makes it a much safer operation. This allows us to call prune from git-gc,
with a grace period of 2 weeks for the unreferenced loose objects (this
value was determined in a discussion on the git list as a safe one).
If you want to override this grace period, just set the config variable
gc.pruneExpire to a different value; an example would be
[gc]
pruneExpire = 6.months.ago
or even "never", if you feel really paranoid.
Note that this new behaviour makes "--prune" be a no-op.
While adding a test to t5304-prune.sh (since it really tests the implicit
call to "prune"), also the original test for "prune --expire" was moved
there from t1410-reflog.sh, where it did not belong.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Also add titles to paragraphs under "CONFIGURATION VARIABLES".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
