Before, if the invocation of git failed, it would be masked by the pipe
since only the return code of the last element of a pipe is used.
Rewrite the test to put the git command on its own line so its return
code is not masked.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case an invocation of a git command fails within the command
substitution, the failure will be masked. Replace the command
substitution with a file-redirection and a call to test_cmp.
This change was done with the following GNU sed expressions:
s/\(\s*\)test \([^ ]*\) = "$(\(git [^)]*\))"/\1echo \2 >expect \&\&\n\1\3 >actual \&\&\n\1test_cmp expect actual/
s/\(\s*\)test "$(\(git [^)]*\))" = \([^ ]*\)/\1echo \3 >expect \&\&\n\1\2 >actual \&\&\n\1test_cmp expect actual/
A future patch will clean up situations where we have multiple duplicate
statements within a test case. This is done to keep this patch purely
mechanical.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case an invocation of `git rev-list` fails within the command
substitution, the failure will be masked. Remove the command
substitution and use test_cmp_rev() so that failures can be discovered.
This change was done with the following sed expressions:
s/test "$(git rev-parse.* \([^)]*\))" = "$(git rev-parse \([^)]*\))"/test_cmp_rev \1 \2/
s/test \([^ ]*\) = "$(git rev-parse.* \([^)]*\))"/test_cmp_rev \1 \2/
s/test "$(git rev-parse.* \([^)]*\))" != "$(git rev-parse.* \([^)]*\))"/test_cmp_rev ! \1 \2/
s/test \([^ ]*\) != "$(git rev-parse.* \([^)]*\))"/test_cmp_rev ! \1 \2/
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When wrapping a git command in a command substitution within another
command, we throw away the git command's exit code. In case the git
command fails, we would like to know about it rather than the failure
being silent. Extract git commands so that their exit codes are not
lost.
Instead of using `test -n` or `test -z`, replace them respectively with
invocations of test_file_not_empty() and test_must_be_empty() so that we
get better debugging information in the case of a failure.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of rolling our own functionality to test the number of lines a
command outputs, use test_line_count() which provides better debugging
information in the case of a failure.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The style for tests in Git is to have the redirect operator attached to
the filename with no spaces. Fix test cases where this is not the case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although `test -f` has the same functionality as test_path_is_file(), in
the case where test_path_is_file() fails, we get much better debugging
information.
Replace `test -f` with test_path_is_file() so that future developers
will have a better experience debugging these test cases.
Also, in the case of `! test -f`, not only should that path not be a
file, it shouldn't exist at all so replace it with
test_path_is_missing().
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were using a redirection operator to feed input into sed. However,
since sed is capable of opening its own files, make sed open its own
files instead of redirecting input into it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual convention is for test case names to be written between
single-quotes. Change all double-quoted test case names to single-quotes
except for two test case names that use variables within.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the test style by removing leading and trailing empty lines
within test cases. Also, reformat multi-line subshells to conform to the
existing style.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case where we are using test_cmp_rev() to report not-equals, we
write `! test_cmp_rev`. However, since test_cmp_rev() contains
r1=$(git rev-parse --verify "$1") &&
r2=$(git rev-parse --verify "$2") &&
`! test_cmp_rev` will succeed if any of the rev-parses fail. This
behavior is not desired. We want the rev-parses to _always_ be
successful.
Rewrite test_cmp_rev() to optionally accept "!" as the first argument to
do a not-equals comparison. Rewrite `! test_cmp_rev` to `test_cmp_rev !`
in all tests to take advantage of this new functionality.
Also, rewrite the rev-parse logic to end with a `|| return 1` instead of
&&-chaining into the rev-comparison logic. This makes it obvious to
future readers that we explicitly intend on returning early if either of
the rev-parses fail.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to POSIX enhancement request '0000767: Add built-in
"local"'[1],
dash only allows one variable in a local definition; it permits
assignment though it doesn't document that clearly.
however, this isn't true since t0000 still passes with this patch
applied on dash 0.5.10.2. Needless to say, since `local` isn't POSIX
standardized, it is not exactly clear what `local` entails on different
versions of different shells.
We currently already have many instances of multiple local assignments
in our codebase. Ensure that this is actually supported by explicitly
testing that it is sane.
[1]: http://austingroupbugs.net/bug_view_page.php?bug_id=767
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touches to the recent update to the build procedure for
the documentation.
* bc/doc-use-docbook-5:
manpage-bold-literal.xsl: match for namespaced "d:literal" in template
* https://github.com/prati0100/git-gui:
git-gui: improve Japanese translation
git-gui: add a readme
git-gui: support for diff3 conflict style
git-gui: use existing interface to query a path's attribute
git-gui (Windows): use git-bash.exe if it is available
treewide: correct several "up-to-date" to "up to date"
Fix build with core.autocrlf=true
As per Wikipedia, "In current technical usage, for one to state that a
feature is deprecated is merely a recommendation against using it." It
is thus contradictory to claim that something is not "officially
deprecated" and then to immediately state that we are both discouraging
its use and pointing people elsewhere.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We recently regressed our rendering with Asciidoctor of "literal"
elements in our manpages, i.e, stuff we have placed within `backticks`
in order to render as monospace. In particular, we lost the bold
rendering of such literal text.
The culprit is f6461b82b9 ("Documentation: fix build with Asciidoctor 2",
2019-09-15), where we switched from DocBook 4.5 to DocBook 5 with
Asciidoctor. As part of the switch, we started using the namespaced
DocBook XSLT stylesheets rather than the non-namespaced ones. (See
f6461b82b9 for more details on why we changed to the namespaced ones.)
The bold literals are implemented as an XSLT snippet <xsl:template
match="literal">...</xsl:template>. Now that we use namespaces, this
doesn't pick up our literals like it used to.
Match for "d:literal" in addition to just "literal", after defining the
d namespace. ("d" is what
http://docbook.sourceforge.net/release/xsl-ns/current/manpages/docbook.xsl
uses.) Note that we need to keep matching without the namespace for
AsciiDoc.
This boldness was introduced by 5121a6d993 ("Documentation: option to
render literal text as bold for manpages", 2009-03-27) and made the
default in 5945717009 ("Documentation: bold literals in man",
2016-05-31).
One reason this was not caught in review is that our doc-diff tool diffs
without any boldness, i.e., it "only" compares text. As pointed out by
Peff in review of this patch, one can use `MAN_KEEP_FORMATTING=1
./doc-diff <...>`
This has been optically tested with AsciiDoc 8.6.10, Asciidoctor 1.5.5
and Asciidoctor 2.0.10. I've also verified that doc-diff produces the
empty output for all three programs, as expected, and that with the
MAN_KEEP_FORMATTING trick, AsciiDoc yields no diff, whereas with
Asciidoctor, we get bold literals, just like we want.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a rather old bug in gitweb---incremental blame output in
javascript actions mode never worked.
* rl/gitweb-blame-prev-fix:
gitweb: correctly store previous rev in javascript-actions mode
The comments for the staging/unstaging test did not accurately
describe the scenario being tested. It is not essential that
the test files being staged/unstaged appear at the end of the
index. All that is required is that the test files are not
flagged with CE_FSMONITOR_VALID and have a position in the
index greater than the number of entries in the index after
unstaging.
The comment for this test has been updated to be more
accurate with respect to the scenario that's being tested.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
-----BEGIN PGP SIGNATURE-----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=zfW8
-----END PGP SIGNATURE-----
Merge tag 'v2.24.0-rc1' of github.com:git/git into master
Git 2.24-rc1
* tag 'v2.24.0-rc1' of github.com:git/git:
Git 2.24-rc1
repo-settings: read an int for index.version
ci: fix GCC install in the Travis CI GCC OSX job
Eleventh batch
ci(osx): use new location of the `perforce` cask
t7419: change test_must_fail to ! for grep
t4014: make output-directory tests self-contained
ci(visual-studio): actually run the tests in parallel
ci(visual-studio): use strict compile flags, and optimization
userdiff: fix some corner cases in dts regex
test-progress: fix test failures on big-endian systems
completion: clarify installation instruction for zsh
grep: avoid leak of chartables in PCRE2
grep: make PCRE2 aware of custom allocator
grep: make PCRE1 aware of custom allocator
remote-curl: pass on atomic capability to remote side
diff-highlight: fix a whitespace nit
fsmonitor: don't fill bitmap with entries to be removed
When this function is passed a path with a trailing slash, it runs right
over the end of that path.
Let's fix this.
Co-authored-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, the setting
$feature{'javascript-actions'}{'default'} = [1];
in gitweb.conf breaks gitweb's blame page: clicking on line numbers
displayed in the second column on the page has no effect.
For comparison, with javascript-actions disabled, clicking on line
numbers loads the previous version of the line.
Addresses https://bugs.debian.org/741883.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Robert Luberda <robert@debian.org>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While dogfooding, Johannes found a bug in the fetch.writeCommitGraph
config behavior. His example initially happened during a clone with
--recurse-submodules, we found that this happens with the first fetch
after cloning a repository that contains a submodule:
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
In the repo I had cloned, there were really 60 commits to scan, but
only 12 were in the list to write when calling
compute_generation_numbers(). A commit in the list expects to see a
parent, but that parent is not in the list.
A follow-up will fix the bug, but first we create a test that
demonstrates the problem. This test must be careful about an existing
commit-graph file, since GIT_TEST_COMMIT_GRAPH=1 will cause the repo we
are cloning to already have one. This then prevents the incremtnal
commit-graph write during the first 'git fetch'.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepath that reads the index.version configuration was broken
with a recent update, which has been corrected.
* ds/feature-macros:
repo-settings: read an int for index.version
Update installation procedure for Perforce on MacOS in the CI jobs
running on Azure pipelines, which was failing.
* js/azure-ci-osx-fix:
ci(osx): use new location of the `perforce` cask
Suppose, from a repository that has ".gitmodules", we clone with
--filter=blob:none:
git clone --filter=blob:none --no-checkout \
https://kernel.googlesource.com/pub/scm/git/git
Then we fetch:
git -C git fetch
This will cause a "unable to load config blob object", because the
fetch_config_from_gitmodules() invocation in cmd_fetch() will attempt to
load ".gitmodules" (which Git knows to exist because the client has the
tree of HEAD) while fetch_if_missing is set to 0.
fetch_if_missing is set to 0 too early - ".gitmodules" here should be
lazily fetched. Git must set fetch_if_missing to 0 before the fetch
because as part of the fetch, packfile negotiation happens (and we do
not want to fetch any missing objects when checking existence of
objects), but we do not need to set it so early. Move the setting of
fetch_if_missing to the earliest possible point in cmd_fetch(), right
before any fetching happens.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
